1197 modules in Cisco Devices
| Module | Description |
|---|---|
| AWC-VLAN-CFG-MIB | Manages VLAN configuration on Cisco Aironet wireless access points, including VLAN-to-SSID mapping. |
| AWCVX-MIB | Provides management objects for Cisco Aironet (SpectraLink) wireless LAN devices, including radio and client statistics. |
| BASIS-GENERIC-MIB | Defines generic shelf management objects for Cisco MGX/Catalyst voice switch platforms. |
| BASIS-MIB | Establishes the OID hierarchy and core management objects for the Cisco MGX/BASIS voice switch platform. |
| BASIS-ONLINE-DIAG-MIB | Manages online diagnostic tests and results for the Cisco MGX/BASIS switch shelf hardware. |
| BASIS-RAS-DISK-MIB | Tracks disk storage status for shelf components of the Cisco MGX/BASIS RAS (Remote Access Server). |
| BASIS-SERIAL-MIB | Manages serial interface configuration and statistics for the Cisco MGX/BASIS voice switch shelf. |
| BASIS-SHELF-MIB | Manages shelf-level hardware inventory, slot occupancy, and power status for the Cisco MGX/BASIS voice platform. |
| CADANT-CMTS-BPI2-MIB | Manages Baseline Privacy Interface Plus (BPI+) encryption and key management for cable modems on ARRIS/Cadant CMTS equipment. |
| CAMSCS-MIB | Manages Cisco/CA multi-service computing platform resources including compute, storage, and network service parameters. |
| CBS-HARDWARE-MIB | Monitors hardware inventory including chassis, power supplies, and fan status for Cisco CBS series small business switches. |
| CBS-MODULE-RESOURCES-MIB | Monitors CPU and memory resource utilization per module on Cisco CBS series small business managed switches. |
| CBS-VAPGROUP-MIB | Manages virtual access point (VAP) group configuration for wireless functionality on Cisco CBS series switches. |
| CBS-VRRP-MIB | Manages Virtual Router Redundancy Protocol (VRRP) configuration and status on Cisco CBS series small business switches. |
| CCAP-MIB | Manages DOCSIS Converged Cable Access Platform (CCAP) combining CMTS and Edge QAM functions for cable broadband delivery. |
| CFAB-MIB | Manages Cisco fabric interconnect configuration and status in a unified computing or data center fabric environment. |
| CIE1000-AGGR-MIB | Manages static and LACP link aggregation group (LAG) configuration and member port status on Cisco IE1000 industrial switches. |
| CIE1000-ALARM-MIB | Manages alarm thresholds and notification configuration for fault monitoring on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-DHCP-SERVER-MIB | Manages DHCP server pool configuration, address leases, and lease statistics on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-DHCP-SNOOPING-MIB | Manages DHCP snooping security configuration and binding table on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-FIRMWARE-MIB | Manages firmware image upload, version tracking, and software upgrade operations on Cisco IE1000 industrial switches. |
| CIE1000-HTTPS-MIB | Manages HTTPS secure web access configuration and TLS certificate settings on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-ICFG-MIB | Manages configuration file save, load, and factory-reset operations on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-IP-MIB | Manages IP interface addressing, routing table, and IPv4/IPv6 configuration on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-IPMC-PROFILE-MIB | Manages IP multicast address profiles used for IGMP/MLD snooping filtering on Cisco IE1000 industrial switches. |
| CIE1000-IPMC-SNOOPING-MIB | Manages IGMP and MLD snooping configuration and multicast group membership on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-LACP-MIB | Manages IEEE 802.3ad LACP (Link Aggregation Control Protocol) configuration and partner status on Cisco IE1000 industrial switches. |
| CIE1000-LLDP-MIB | Manages IEEE 802.1AB LLDP neighbor discovery and LLDP-MED configuration on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-MAC-MIB | Manages MAC address table entries including static addresses and aging configuration on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-MIRROR-MIB | Manages port mirroring (SPAN) session configuration for traffic monitoring on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-MSTP-MIB | Manages IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) instance configuration on Cisco IE1000 industrial switches. |
| CIE1000-NTP-MIB | Handles configuration of the NTP client and reports time synchronization status on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-POE-MIB | Manages IEEE 802.3af/at Power over Ethernet (PoE) port power budget and power delivery on Cisco IE1000 industrial switches. |
| CIE1000-PORT-MIB | Manages physical port configuration including speed, duplex, and operational status on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-PORT-POWER-SAVINGS-MIB | Manages energy-efficient Ethernet and port power-saving features on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-PSEC-MIB | Manages port security (802.1X and MAC-based) configuration and violation actions on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-SNMP-MIB | Manages SNMP agent configuration including community strings, users, and trap destinations on Cisco IE1000 industrial switches. |
| CIE1000-SSH-MIB | Manages SSH server configuration and access key management for secure CLI access on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-SYSLOG-MIB | Manages syslog message storage, remote server configuration, and log level filtering on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-SYSUTIL-MIB | Manages system utilities for Cisco IE1000 industrial Ethernet switches, including CPU, memory, and system health. |
| CIE1000-TC | Defines textual conventions for Cisco IE1000 industrial Ethernet switch MIB modules. |
| CIE1000-USERS-MIB | Manages local user accounts and authentication settings on Cisco IE1000 industrial Ethernet switches. |
| CIE1000-VLAN-MIB | Manages VLAN configuration and membership on Cisco IE1000 industrial Ethernet switches. |
| CIOMIB | Manages Cisco I/O module operations and interface I/O statistics. |
| CISCO-5800-HEALTH-MON-MIB | Monitors hardware health metrics on Cisco 5800 series access platforms. |
| CISCO-6200-MIB | Manages platform-specific hardware and operational parameters on Cisco 6200 series devices. |
| CISCO-6400-CHASSIS-MIB | Monitors chassis, card slots, and environmental status on Cisco 6400 DSL aggregation platforms. |
| CISCO-802-TAP-MIB | Manages IEEE 802 media lawful intercept tap configuration on Cisco devices. |
| CISCO-AAA-CLIENT-CAPABILITY | Declares SNMP agent capabilities for the Cisco AAA client MIB. |
| CISCO-AAA-CLIENT-MIB | Manages AAA client configuration and statistics for authentication on Cisco devices. |
| CISCO-AAA-SERVER-CAPABILITY | Declares SNMP agent capabilities for the Cisco AAA server MIB. |
| CISCO-AAA-SERVER-EXT-CAPABILITY | Declares SNMP agent capabilities for the extended Cisco AAA server MIB. |
| CISCO-AAA-SERVER-EXT-MIB | Extends Cisco AAA server management with additional server group and method list objects. |
| CISCO-AAA-SERVER-MIB IPNM ✓ | Provides management objects for configuring and monitoring AAA (Authentication, Authorization, Accounting) server settings, including creating, modifying, and deleting RADIUS server configurations via SNMP. |
| CISCO-AAA-SESSION-MIB IPNM ✓ | Provides data for accounting sessions based on Authentication, Authorization, and Accounting (AAA) protocols such as RADIUS and TACACS+. |
| CISCO-ACCESS-ENVMON-MIB | Monitors environmental conditions including temperature and voltage on Cisco access routers. |
| CISCO-ACL-MIB | Manages IP and MAC access control list configuration and statistics on Cisco devices. |
| CISCO-ADAPTER-MIB | Manages network adapter cards and their operational parameters on Cisco server platforms. |
| CISCO-ADMISSION-POLICY-MIB | Manages network admission policy rules and enforcement on Cisco devices. |
| CISCO-ALARM-MIB | Provides generic alarm management including alarm table and notification control on Cisco devices. |
| CISCO-ALPS-MIB | Manages ALPS (Airline Protocol Support) for SNA-based airline reservation system connectivity on Cisco routers. |
| CISCO-ANNOUNCEMENT-MIB | Manages pre-recorded voice announcement files and playback on Cisco voice gateway platforms. |
| CISCO-AON-STATUS-MIB | Monitors Cisco AON (Application-Oriented Networking) blade module operational status. |
| CISCO-APPLIANCE-REDUNDANCY-MIB | Manages high-availability redundancy state and failover on Cisco appliance platforms. |
| CISCO-APPLICATION-ACCELERATION-CAPABILITY | Declares SNMP agent capabilities for the Cisco WAAS application acceleration MIB. |
| CISCO-APPLICATION-ACCELERATION-MIB | Manages Cisco WAAS WAN optimization and application acceleration statistics. |
| CISCO-APPNAV-CAPABILITY | Declares SNMP agent capabilities for the Cisco AppNav application-aware networking MIB. |
| CISCO-APPNAV-MIB | Manages Cisco AppNav application classification and service node cluster configuration. |
| CISCO-APS-EXT-MIB | Extends SONET/SDH APS monitoring with Cisco-specific protection group objects. |
| CISCO-APS-MIB | Manages SONET/SDH Automatic Protection Switching (APS) groups on Cisco optical interfaces. |
| CISCO-ASN-GATEWAY-MIB | Manages Cisco WiMAX ASN (Access Service Network) gateway configuration and session statistics. |
| CISCO-ASPP-MIB | Manages Cisco ASPP (Async Serial Protocol) for asynchronous serial line encapsulation. |
| CISCO-AUTH-FRAMEWORK-CAPABILITY | Declares SNMP agent capabilities for the Cisco 802.1X authentication framework MIB. |
| CISCO-AUTH-FRAMEWORK-MIB | Manages Cisco 802.1X port-based authentication framework configuration and session state. |
| CISCO-AUTHORIZATION-STATS-MIB | Monitors authorization request and response statistics on Cisco AAA-enabled devices. |
| CISCO-BBSM-MIB | Manages Cisco BBSM (Building Broadband Service Manager) for hospitality broadband internet access. |
| CISCO-BCP-MIB | Manages Bridging Control Protocol (BCP) for bridging over PPP links on Cisco routers. |
| CISCO-BERT-CAPABILITY | Declares SNMP agent capabilities for the Cisco BERT MIB. |
| CISCO-BERT-MIB | Manages Bit Error Rate Testing (BERT) on Cisco digital interfaces for line quality verification. |
| CISCO-BGP-POLICY-ACCOUNTING-MIB | Tracks per-BGP-policy traffic accounting counters on Cisco routers. |
| CISCO-BGP-POLICY-ACCOUNTING-MIB-CAPABILITY | Declares SNMP agent capabilities for the Cisco BGP policy accounting MIB. |
| CISCO-BGP4-MIB IPNM ✓ | Provides Cisco-specific extensions for monitoring BGP routing protocol implementation, supporting both IPv4 and IPv6 address families. |
| CISCO-BITS-CLOCK-CAPABILITY | Declares SNMP agent capabilities for the Cisco BITS clock MIB. |
| CISCO-BITS-CLOCK-MIB | Manages BITS (Building Integrated Timing Supply) clock source selection on Cisco TDM platforms. |
| CISCO-BOOT-HWDIAGS-MIB | Monitors results of hardware diagnostics executed at boot time on Cisco platforms. |
| CISCO-BRIDGE-CAPABILITY | Declares SNMP agent capabilities for Cisco bridge MIB extensions. |
| CISCO-BRIDGE-DOMAIN-MIB | Manages bridge domain (virtual switching instance) configuration on Cisco IOS/IOS-XE platforms. |
| CISCO-BRIDGE-EXT-CAPABILITY | Declares SNMP agent capabilities for the Cisco bridge extension MIB. |
| CISCO-BRIDGE-EXT-MIB | Extends standard bridge (STP/FDB) management with Cisco-specific bridging objects. |
| CISCO-BSC-MIB | Handles Binary Synchronous Communication (BSC) protocol links that provide SNA connectivity on Cisco routers. |
| CISCO-BSTUN-MIB | Manages BSTUN (Block Serial Tunneling) for encapsulating SNA BSC traffic over IP on Cisco routers. |
| CISCO-BULK-FILE-CAPABILITY | Declares SNMP agent capabilities for the Cisco bulk file transfer MIB. |
| CISCO-BULK-FILE-MIB | Manages bulk SNMP data export to files for off-box analysis on Cisco devices. |
| CISCO-BUS-MIB | Manages the ATM LANE Broadcast and Unknown Server (BUS) on Cisco ATM LANE switches. |
| CISCO-C12000-IF-HC-COUNTERS-MIB | Provides 64-bit high-capacity interface traffic counters for Cisco GSR 12000 series routers. |
| CISCO-C2900-MIB | Manages platform-specific hardware and software parameters on Cisco Catalyst 2900 switches. |
| CISCO-C8500-REDUNDANCY-MIB | Manages supervisor redundancy and failover on Cisco 8500 series router platforms. |
| CISCO-CAC-SYSTEM-MIB | Manages call admission control system-wide bandwidth and resource policies on Cisco voice platforms. |
| CISCO-CACHE-ENGINE-MIB | Monitors Cisco cache engine (web proxy) hit rates, connections, and storage utilization. |
| CISCO-CALL-APPLICATION-MIB | Manages telephony call application scripts and their resource usage on Cisco voice gateways. |
| CISCO-CALL-HISTORY-MIB IPNM ✓ | Stores call information for all calls on Cisco routers and access servers for accounting purposes, including connection times and disconnection details. |
| CISCO-CALL-RESOURCE-POOL-MIB | Tracks allocation and availability of voice resource pools on Cisco call processing platforms. |
| CISCO-CALL-TRACKER-MIB | Tracks active and historical dial calls including duration and status on Cisco access servers. |
| CISCO-CALL-TRACKER-MODEM-MIB | Tracks modem call details including connect speeds and error rates on Cisco dial access platforms. |
| CISCO-CALL-TRACKER-TCP-MIB | Tracks TCP-based call connections and statistics on Cisco access server platforms. |
| CISCO-CALLHOME-CAPABILITY | Declares SNMP agent capabilities for the Cisco Call Home MIB. |
| CISCO-CALLHOME-MIB | Manages Cisco Call Home configuration for automated device event notification to support. |
| CISCO-CAR-MIB | Manages Committed Access Rate (CAR) QoS rate-limiting policies on Cisco router interfaces. |
| CISCO-CAS-IF-CAPABILITY | Declares SNMP agent capabilities for the Cisco CAS interface MIB. |
| CISCO-CAS-IF-EXT-CAPABILITY | Declares SNMP agent capabilities for the extended Cisco CAS interface MIB. |
| CISCO-CAS-IF-EXT-MIB | Extends Channel Associated Signaling (CAS) interface management with additional Cisco-specific objects. |
| CISCO-CAS-IF-MIB | Manages CAS (Channel Associated Signaling) T1/E1 telephony interface configuration on Cisco gateways. |
| CISCO-CASA-FA-CAPABILITY | Declares SNMP agent capabilities for the Cisco CASA forwarding agent MIB. |
| CISCO-CASA-FA-MIB | Manages Cisco CASA forwarding agent configuration for server load balancing. |
| CISCO-CASA-MIB | Manages Cisco CASA (Cooperative Scalable Architecture) server farm load balancing parameters. |
| CISCO-CAT6K-CROSSBAR-CAPABILITY | Declares SNMP agent capabilities for the Cisco Catalyst 6500 crossbar switching fabric MIB. |
| CISCO-CAT6K-CROSSBAR-MIB | Monitors crossbar switching fabric utilization and error statistics on Cisco Catalyst 6000/6500 switches. |
| CISCO-CAT6k-NAT-STAT-MIB | Monitors Network Address Translation (NAT) statistics on Cisco Catalyst 6000 series switches. |
| CISCO-CATOS-ACL-QOS-CAPABILITY | Declares SNMP agent capabilities for the Cisco CatOS ACL and QoS MIB. |
| CISCO-CATOS-ACL-QOS-MIB | Manages ACL-based QoS policy configuration on Cisco Catalyst switches running CatOS. |
| CISCO-CBP-TARGET-MIB | Manages Class-Based Policy (CBP) target bindings for attaching policies to interfaces on Cisco devices. |
| CISCO-CBP-TARGET-TC-MIB | Defines textual conventions for Cisco Class-Based Policy target MIB modules. |
| CISCO-CBP-TC-MIB | Defines shared textual conventions and type definitions for Cisco Class-Based Policy MIBs. |
| CISCO-CCM-CAPABILITY | Defines SNMP agent capability statements for the Cisco Unified Communications Manager (CallManager) MIB. |
| CISCO-CCM-MIB IPNM ✓ | Monitors Cisco Unified Communications Manager (CallManager), providing real-time and configured information about the call processing system and its registered devices. |
| CISCO-CCME-MIB | Covers monitoring and management of Cisco CallManager Express (CME), an IOS-based IP PBX designed for small branch telephony deployments. |
| CISCO-CDL-MIB | Manages the Cisco Content Distribution Library, tracking content objects, distribution tasks, and replication status across ACNS nodes. |
| CISCO-CDMA-AHDLC-MIB | Monitors the Async HDLC layer used in Cisco CDMA PDSN equipment for mobile packet data framing statistics. |
| CISCO-CDMA-PDSN-CRP-MIB | Manages the Cisco PDSN Cluster Redundancy Protocol, providing failover and state synchronization for CDMA packet data serving nodes. |
| CISCO-CDMA-PDSN-EXT-MIB | Provides extended management objects for Cisco CDMA Packet Data Serving Node, supplementing base PDSN MIB with additional counters and controls. |
| CISCO-CDMA-PDSN-MIB | Manages Cisco CDMA2000 Packet Data Serving Node (PDSN) sessions, connections, and mobile subscriber data flows. |
| CISCO-CDP-CAPABILITY IPNM ✓ | An AGENT-CAPABILITIES module that describes the supported capabilities of the CISCO-CDP-MIB across various Cisco platforms. |
| CISCO-CDP-MIB IPNM ✓ | Manages the Cisco Discovery Protocol (CDP), providing information about directly connected neighboring network devices. |
| CISCO-CDSTV-AUTHMGR-MIB | Monitors the authentication manager component of the Cisco CDS-TV video streaming system, tracking credential validation and access control. |
| CISCO-CDSTV-BWMGR-MIB | Manages bandwidth allocation and rate limiting within the Cisco CDS-TV content delivery system for video-on-demand services. |
| CISCO-CDSTV-CS-STATS-MIB | Provides statistical counters for the Cisco CDS-TV content store, including cache hits, misses, and storage utilization metrics. |
| CISCO-CDSTV-FSI-MIB | Monitors the File System Interface component of Cisco CDS-TV, tracking content storage, retrieval, and filesystem operations. |
| CISCO-CDSTV-INGEST-TUNING-MIB | Manages tuning parameters for the Cisco CDS-TV ingest subsystem, controlling how content is acquired and processed from broadcast sources. |
| CISCO-CDSTV-INGESTMGR-MIB | Monitors and manages the ingest manager component of Cisco CDS-TV, overseeing content acquisition workflows and ingest job status. |
| CISCO-CDSTV-ISA-MIB | Manages the Integrated Stream Adapter (ISA) within Cisco CDS-TV, handling stream processing and adaptation for video delivery. |
| CISCO-CDSTV-SERVER-MIB | Provides management objects for Cisco CDS-TV server nodes, including operational status, resource utilization, and service configuration. |
| CISCO-CDSTV-SERVICES-MIB | Monitors CDS-TV service definitions, subscriber entitlements, and service delivery status on Cisco video-on-demand platforms. |
| CISCO-CEF-MIB | Manages Cisco Express Forwarding, providing detailed statistics and configuration for CEF-based IP packet switching and load balancing. |
| CISCO-CEF-TC | Defines textual conventions used across Cisco Express Forwarding MIB modules for consistent data type representation. |
| CISCO-CFS-MIB | Manages Cisco Fabric Services, enabling configuration distribution and synchronization across Cisco MDS SAN fabric switches. |
| CISCO-CHANNEL-MIB | Manages Cisco IBM channel interfaces, providing statistics and configuration for mainframe channel-attached router connections. |
| CISCO-CIDS-MIB IPNM ✓ | Provides trap definitions for Cisco Intrusion Detection System (IDS) alert and error events, and read access to sensor health information such as memory-critical status. |
| CISCO-CIPCMPC-MIB | Monitors the MPC (Multipath Channel) component of the Cisco Channel Interface Processor for IBM mainframe connectivity. |
| CISCO-CIPCSNA-MIB | Manages CSNA (Cisco SNA) functions on the Cisco Channel Interface Processor, enabling SNA protocol support over IP networks. |
| CISCO-CIPLAN-MIB | Monitors LAN emulation functions on the Cisco Channel Interface Processor, providing statistics for LAN-attached mainframe traffic. |
| CISCO-CIPTCPIP-MIB | Manages TCP/IP offload and channel operations on the Cisco CIP, tracking connections between mainframe applications and IP networks. |
| CISCO-CIPTG-MIB | Monitors transmission group (TG) statistics on the Cisco Channel Interface Processor for SNA multi-link transmission group management. |
| CISCO-CIRCUIT-INTERFACE-MIB | Manages circuit-mode network interfaces on Cisco devices, providing configuration and status for dedicated circuit connections. |
| CISCO-CLASS-BASED-QOS-MIB IPNM ✓ | Provides read access to Quality of Service (QoS) configuration and statistics for Cisco platforms that support the Modular QoS Command-Line Interface (MQC). |
| CISCO-CLASS-BASED-QOS-MIB-CAPABILITY | Defines SNMP agent capability statements for the Cisco Class-Based QoS MIB (CBWFQ/CBQOS) policy framework. |
| CISCO-CLUSTER-MIB | Manages Cisco device clusters, providing configuration and status for cluster membership, command switches, and member switches. |
| CISCO-CNO-SWITCH-MIB | Provides management objects specific to Cisco Catalyst Network Office switches, covering port configuration and switch fabric status. |
| CISCO-COMMON-MGMT-CAPABILITY | Defines SNMP agent capability statements for the Cisco Common Management MIB framework across device platforms. |
| CISCO-COMMON-MGMT-MIB | Provides a common set of management objects for Cisco devices, covering generic device status, notifications, and administrative controls. |
| CISCO-COMMON-ROLES-EXT-MIB | Extends Cisco role-based access control with additional permission rules and role attribute definitions for device management. |
| CISCO-COMMON-ROLES-MIB | Manages role-based access control (RBAC) on Cisco devices, defining user roles, associated privileges, and access scope. |
| CISCO-COMPRESSION-SERVICE-ADAPTER-MIB | Manages Cisco Compression Service Adapter hardware modules, tracking WAN data compression statistics and adapter configuration. |
| CISCO-CONFIG-COPY-CAPABILITY | Defines SNMP agent capability statements for the Cisco Config Copy MIB used to transfer configuration files via SNMP. |
| CISCO-CONFIG-COPY-MIB IPNM ✓ | Facilitates copying configuration files to and from Cisco devices via SNMP, including transfers between running, startup, and remote configurations. |
| CISCO-CONFIG-MAN-CAPABILITY | Defines SNMP agent capability statements for Cisco Configuration Change Management MIB across IOS platforms. |
| CISCO-CONFIG-MAN-MIB IPNM ✓ | Tracks changes and saves of the running configuration, maintaining a history table of configuration management events with details about each change. |
| CISCO-CONTACT-CENTER-APPS-MIB | Monitors Cisco Unified Contact Center applications, tracking agent states, call queues, and contact center performance metrics. |
| CISCO-CONTENT-DELIVERY-STREAMING-MIB | Manages Cisco content delivery streaming services, monitoring stream sessions, bandwidth usage, and delivery quality metrics. |
| CISCO-CONTENT-ENGINE-MIB | Manages Cisco ACNS Content Engine appliances, tracking cached content, HTTP/FTP proxy statistics, and cache fill operations. |
| CISCO-CONTENT-NETWORK-MIB | Monitors the Cisco Content Networking infrastructure, providing management for content routing, load distribution, and CDN topology. |
| CISCO-CONTENT-SERVICES-CAPABILITY | Defines SNMP agent capability statements for the Cisco Content Services MIB on supported appliance platforms. |
| CISCO-CONTENT-SERVICES-MIB | Manages Cisco Content Services devices, covering virtual server configurations, real server health, and content switching policies. |
| CISCO-CONTEXT-MAPPING-CAPABILITY | Defines SNMP agent capability statements for the Cisco Context Mapping MIB that correlates SNMP contexts to VRF instances. |
| CISCO-CONTEXT-MAPPING-MIB | Maps SNMP context names to corresponding VRF instances, topology names, and bridge domains on Cisco multi-VRF devices. |
| CISCO-COPS-CLIENT-CAPABILITY | Defines SNMP agent capability statements for the Cisco COPS (Common Open Policy Service) client MIB. |
| CISCO-COPS-CLIENT-MIB | Manages the Cisco COPS protocol client, monitoring policy server connections, request states, and policy decision exchanges. |
| CISCO-CPRI-MIB | Manages Common Public Radio Interface (CPRI) links on Cisco radio access equipment, monitoring link status and fronthaul performance. |
| CISCO-CRYPTO-ACCELERATOR-MIB | Monitors Cisco hardware cryptographic accelerator modules, providing statistics on encryption throughput, key operations, and acceleration offload. |
| CISCO-CSG-CAPABILITY | Defines SNMP agent capability statements for the Cisco Content Services Gateway MIB on Cisco IOS-based platforms. |
| CISCO-CSG-MIB | Manages Cisco Content Services Gateway, monitoring subscriber service flows, billing records, and content-based charging functions. |
| CISCO-CUICAPPS-MIB | Monitors Cisco Unified Intelligence Center applications, tracking report generation, data sources, and contact center analytics. |
| CISCO-CVP-MIB | Manages Cisco Unified Customer Voice Portal, monitoring call flows, IVR sessions, and voice self-service application performance. |
| CISCO-DATA-COLLECTION-CAPABILITY | Defines SNMP agent capability statements for the Cisco Data Collection MIB used for periodic SNMP data sampling. |
| CISCO-DATA-COLLECTION-MIB | Manages SNMP-based data collection tasks on Cisco devices, scheduling periodic polls and storing sampled MIB object values. |
| CISCO-DDP-IAPP-MIB | Manages the Cisco 802.11 Inter-Access Point Protocol (IAPP) for wireless client roaming, tracking context transfers and handoff events. |
| CISCO-DEVICE-EXCEPTION-REPORTING-MIB | Manages device exception event reporting on Cisco equipment, configuring thresholds and forwarding rules for anomaly notifications. |
| CISCO-DEVICE-LOCATION-MIB | Manages device location information on Cisco equipment, storing geospatial or civic address data for network inventory purposes. |
| CISCO-DHCP-RELAY-MIB | Manages DHCP relay agent configuration and statistics on Cisco devices, tracking relayed discover/offer/request/ack message counts. |
| CISCO-DHCP-SNOOPING-CAPABILITY | Defines SNMP agent capability statements for the Cisco DHCP Snooping MIB on Catalyst switch platforms. |
| CISCO-DHCP-SNOOPING-MIB | Manages DHCP snooping security on Cisco switches, controlling trusted/untrusted port assignments and binding table entries. |
| CISCO-DIAL-CONTROL-MIB IPNM ✓ | Extends the IETF Dial Control MIB with management of dial peers for voice telephony on both circuit-switched and IP data networks. |
| CISCO-DIAMETER-BASE-PROTOCOL-CAPABILITY | Defines SNMP agent capability statements for the Cisco Diameter Base Protocol MIB. |
| CISCO-DIAMETER-BASE-PROTOCOL-MIB | Manages Cisco Diameter base protocol operations, monitoring peer connections, message statistics, and transport session states. |
| CISCO-DIAMETER-CC-APPL-CAPABILITY | Defines SNMP agent capability statements for the Cisco Diameter Credit Control Application MIB. |
| CISCO-DIAMETER-CC-APPL-MIB | Monitors Cisco Diameter Credit Control Application sessions used for online charging and policy enforcement in mobile networks. |
| CISCO-DIAMETER-SG-CAPABILITY | Defines SNMP agent capability statements for the Cisco Diameter Session Gateway MIB. |
| CISCO-DIAMETER-SG-MIB | Manages Cisco Diameter Session Gateway functions, monitoring protocol conversion, session routing, and AAA proxy operations. |
| CISCO-DIFFSERV-EXT-MIB | Extends the standard DiffServ MIB with Cisco-specific objects for DSCP marking, queuing policies, and traffic conditioning. |
| CISCO-DIGITAL-MEDIA-SYSTEMS-CAPABILITY | Defines SNMP agent capability statements for the Cisco Digital Media Systems MIB. |
| CISCO-DIGITAL-MEDIA-SYSTEMS-MIB | Manages Cisco Digital Media System components including Digital Media Players and Digital Signs, monitoring playback and device status. |
| CISCO-DISMAN-EVENT-CAPABILITY | Defines SNMP agent capability statements for the Cisco Distributed Management Event MIB on IOS platforms. |
| CISCO-DISMAN-EXPRESSION-CAPABILITY | Defines SNMP agent capability statements for the Cisco Distributed Management Expression MIB used for computed MIB values. |
| CISCO-DIST-DIRECTOR-CAPABILITY | Defines SNMP agent capability statements for the Cisco DistributedDirector load-balancing appliance MIB. |
| CISCO-DIST-DIRECTOR-MIB | Manages Cisco DistributedDirector intelligent DNS-based load balancing, monitoring request routing decisions and server availability. |
| CISCO-DLC-SWITCH-MIB | Manages Cisco DLC (Data Link Control) switching for LLC/DLC bridging, supporting legacy SNA and NetBIOS LAN-to-LAN connectivity. |
| CISCO-DLR-MIB | Manages Device Level Ring (DLR) industrial Ethernet redundancy protocol on Cisco IE switches, monitoring ring topology and fault status. |
| CISCO-DLSW-EXT-MIB | Extends DLSw management with Cisco-specific objects for SNA/NetBIOS-over-IP circuit configuration and performance tuning. |
| CISCO-DLSW-MIB | Manages Cisco Data Link Switching (DLSw) for transporting SNA and NetBIOS traffic over IP networks, tracking circuit and peer states. |
| CISCO-DM-MIB | Manages Cisco MDS Domain Manager for Fibre Channel SAN fabrics, tracking domain IDs, principal switch election, and fabric topology. |
| CISCO-DMN-DSG-ABOUT-MIB | Provides identification and version information objects for the Cisco DMN D9800 digital satellite gateway device. |
| CISCO-DMN-DSG-ABOUT-REV2-MIB | Provides updated identification and hardware/software version objects for the Cisco DMN D9800 digital satellite receiver. |
| CISCO-DMN-DSG-AUDIO-MIB | Manages audio decoding configuration and status on the Cisco DMN D9800 satellite gateway, including codec selection and output levels. |
| CISCO-DMN-DSG-BISS-MIB | Manages Basic Interoperable Scrambling System (BISS) descrambling parameters on the Cisco DMN D9800 satellite receiver. |
| CISCO-DMN-DSG-BKPRST-MIB | Manages backup and restore operations for configuration data on the Cisco DMN D9800 digital satellite gateway. |
| CISCO-DMN-DSG-CA-MIB | Manages conditional access (CA) system configuration and entitlement status on the Cisco DMN D9800 satellite receiver. |
| CISCO-DMN-DSG-CI-MIB | Manages the Common Interface (CI) module slot on the Cisco DMN D9800 for conditional access card insertion and communication. |
| CISCO-DMN-DSG-Cueing-MIB | Manages SCTE-35 ad insertion cueing message detection and output on the Cisco DMN D9800 satellite gateway. |
| CISCO-DMN-DSG-DECODE-ENABLE-MIB | Controls decode enable settings and service authorization on the Cisco DMN D9800 digital satellite receiver. |
| CISCO-DMN-DSG-DIAG-MIB | Provides diagnostic tools and test functions for the Cisco DMN D9800 satellite gateway hardware and signal path. |
| CISCO-DMN-DSG-DISEQC-DISH-POSITION-MIB | Manages DiSEqC motor control for satellite dish positioning on the Cisco DMN D9800 satellite receiver. |
| CISCO-DMN-DSG-DL-MIB | Manages firmware and software download operations for the Cisco DMN D9800 digital satellite gateway. |
| CISCO-DMN-DSG-DPM-MIB | Manages the Digital Program Map (DPM) and service selection on the Cisco DMN D9800 satellite receiver. |
| CISCO-DMN-DSG-DR-MIB | Manages device redundancy configuration and failover for the Cisco DMN D9800 digital satellite gateway platform. |
| CISCO-DMN-DSG-FAULT-MIB | Monitors active faults, alarm history, and fault severity on the Cisco DMN D9800 digital satellite gateway. |
| CISCO-DMN-DSG-FAVORITE-MIB | Manages user-defined favorite channel lists and service presets on the Cisco DMN D9800 satellite receiver. |
| CISCO-DMN-DSG-FEATURE-MIB | Manages licensed feature activation and capability reporting on the Cisco DMN D9800 digital satellite gateway. |
| CISCO-DMN-DSG-FETHRESHOLDS-MIB | Manages forward error correction (FEC) and bit-error-rate threshold settings on the Cisco DMN D9800 satellite receiver. |
| CISCO-DMN-DSG-FPUI-MIB | Manages front panel user interface settings and display configuration on the Cisco DMN D9800 satellite gateway. |
| CISCO-DMN-DSG-IPV4V6-MIB | Manages IPv4 and IPv6 network configuration on the Cisco DMN D9800 digital satellite gateway for management connectivity. |
| CISCO-DMN-DSG-LOCKLEVEL-MIB | Manages parental control lock levels and PIN-based content restriction on the Cisco DMN D9800 satellite receiver. |
| CISCO-DMN-DSG-MOIP-MIB | Manages MPEG-over-IP (MoIP) output configuration and stream delivery on the Cisco DMN D9800 satellite gateway. |
| CISCO-DMN-DSG-MOIPINPUT-MIB | Manages MPEG-over-IP input reception and stream acquisition parameters on the Cisco DMN D9800 satellite gateway. |
| CISCO-DMN-DSG-MPE-MIB | Manages Multi-Protocol Encapsulation (MPE) data stream processing on the Cisco DMN D9800 satellite receiver. |
| CISCO-DMN-DSG-PRGMENTRY-MIB | Manages program entry tables and channel database configuration on the Cisco DMN D9800 satellite receiver. |
| CISCO-DMN-DSG-PRODUCTION-MIB | Manages production mode settings and operational configuration profiles on the Cisco DMN D9800 satellite gateway. |
| CISCO-DMN-DSG-PROTOCOLS-MIB | Manages protocol-level settings for data encapsulation and transport on the Cisco DMN D9800 satellite gateway. |
| CISCO-DMN-DSG-REMINDER-MIB | Manages scheduled event reminder settings for upcoming programs on the Cisco DMN D9800 satellite receiver. |
| CISCO-DMN-DSG-ROOT-MIB | Provides the root OID registration and top-level MIB structure for all Cisco DMN D9800 digital satellite gateway MIBs. |
| CISCO-DMN-DSG-ROUTING-MIB | Manages IP routing table configuration and static route entries for the Cisco DMN D9800 satellite gateway. |
| CISCO-DMN-DSG-SDI-MIB | Manages Serial Digital Interface (SDI) video output configuration and signal format on the Cisco DMN D9800 satellite gateway. |
| CISCO-DMN-DSG-SESSIONCONTROL-MIB | Manages viewer session control and service access authorization on the Cisco DMN D9800 digital satellite gateway. |
| CISCO-DMN-DSG-SUBTITLES-MIB | Manages subtitle and teletext decoding configuration on the Cisco DMN D9800 digital satellite receiver. |
| CISCO-DMN-DSG-SYSTEMTOOL-MIB | Provides system-level tools including reboot, factory reset, and configuration management on the Cisco DMN D9800 gateway. |
| CISCO-DMN-DSG-TIME-MIB | Manages time synchronization and NTP configuration on the Cisco DMN D9800 digital satellite gateway. |
| CISCO-DMN-DSG-TRANSCODE-MIB | Manages video and audio transcoding configuration and job status on the Cisco DMN D9800 digital satellite gateway. |
| CISCO-DMN-DSG-TSOUT-MIB | Manages MPEG transport stream output configuration and ASI/IP multiplex settings on the Cisco DMN D9800 satellite gateway. |
| CISCO-DMN-DSG-TUNING-MIB | Manages satellite tuner and demodulator configuration on the Cisco DMN D9800, including frequency, symbol rate, and polarization. |
| CISCO-DMN-DSG-VBI-MIB | Manages Vertical Blanking Interval (VBI) data insertion and processing on the Cisco DMN D9800 satellite receiver. |
| CISCO-DMN-DSG-VIDEO-MIB | Manages video decoding parameters and output format configuration on the Cisco DMN D9800 digital satellite receiver. |
| CISCO-DNAC-MIB | Monitors Cisco DNA Center network automation platform, tracking device onboarding, assurance metrics, and policy deployment status. |
| CISCO-DNS-CLIENT-CAPABILITY | Defines SNMP agent capability statements for the Cisco DNS Client MIB on supported IOS and NX-OS platforms. |
| CISCO-DNS-CLIENT-MIB | Manages DNS client configuration on Cisco devices, including resolver settings, name server lists, and domain search order. |
| CISCO-DNS-SERVER-MIB | Manages a Cisco IOS-based DNS server, monitoring zone data, query statistics, and recursive resolution performance. |
| CISCO-DOCS-EXT-MIB | Provides Cisco-specific extensions to DOCSIS cable management MIBs, adding proprietary objects for cable modem and CMTS management. |
| CISCO-DOCS-REMOTE-QUERY-MIB | Manages remote SNMP query proxying for DOCSIS cable modems, allowing CMTS-initiated retrieval of modem MIB data. |
| CISCO-DOT11-ANTENNA-MIB | Manages 802.11 antenna configuration on Cisco wireless access points, including antenna type, gain, and diversity settings. |
| CISCO-DOT11-ASSOCIATION-MIB IPNM ✓ | Provides network management information on IEEE 802.11 wireless device association management and per-client data packet forwarding configuration and statistics. |
| CISCO-DOT11-CONTEXT-SERVICES-CAPABILITY | Defines SNMP agent capability statements for Cisco 802.11 Context Services MIB on wireless infrastructure platforms. |
| CISCO-DOT11-CONTEXT-SERVICES-CLIENT-CAPABILITY | Defines SNMP agent capability statements for Cisco 802.11 Context Services Client MIB on wireless client platforms. |
| CISCO-DOT11-CONTEXT-SERVICES-CLIENT-MIB | Manages 802.11 IAPP context services on Cisco wireless clients, tracking inter-AP roaming context transfers and client state. |
| CISCO-DOT11-CONTEXT-SERVICES-MANAGER-MIB | Manages context services coordination on Cisco wireless LAN controllers, overseeing client roaming context distribution. |
| CISCO-DOT11-CONTEXT-SERVICES-MIB | Manages 802.11 IAPP context service operations on Cisco access points for seamless wireless client roaming. |
| CISCO-DOT11-HT-MAC-CAPABILITY | Defines SNMP agent capability statements for the Cisco 802.11n High-Throughput MAC MIB. |
| CISCO-DOT11-HT-MAC-MIB | Manages 802.11n High-Throughput MAC layer parameters on Cisco access points, including AMPDU and AMSDU aggregation settings. |
| CISCO-DOT11-HT-PHY-CAPABILITY | Defines SNMP agent capability statements for the Cisco 802.11n High-Throughput PHY MIB. |
| CISCO-DOT11-HT-PHY-MIB | Manages 802.11n High-Throughput PHY configuration on Cisco access points, including MIMO stream counts and channel bonding. |
| CISCO-DOT11-IF-MIB | Covers Cisco IEEE 802.11 wireless LAN interfaces, with objects for radio configuration, channel management, and interface statistics. |
| CISCO-DOT11-LBS-MIB | Manages 802.11 Location-Based Services on Cisco wireless infrastructure, tracking client location data and positioning measurements. |
| CISCO-DOT11-QOS-MIB | Manages 802.11e QoS (WMM/WME) parameters on Cisco access points, configuring EDCA traffic categories and admission control. |
| CISCO-DOT11-RADAR-MIB | Manages DFS radar detection on Cisco 802.11a/n access points, monitoring radar events and channel change activity. |
| CISCO-DOT11-RADIO-DIAGNOSTIC-CAPABILITY | Defines SNMP agent capability statements for the Cisco 802.11 Radio Diagnostic MIB. |
| CISCO-DOT11-RADIO-DIAGNOSTIC-MIB | Manages radio frequency diagnostics on Cisco 802.11 access points, providing RF noise, interference, and signal quality measurements. |
| CISCO-DOT11-SSID-SECURITY-MIB | Manages per-SSID security policies on Cisco 802.11 access points, including authentication modes, cipher suites, and VLAN bindings. |
| CISCO-DOT11-WIDS-CAPABILITY | Defines SNMP agent capability statements for the Cisco 802.11 Wireless Intrusion Detection System MIB. |
| CISCO-DOT11-WIDS-MIB | Manages wireless intrusion detection on Cisco 802.11 infrastructure, monitoring rogue AP detection, attack signatures, and containment actions. |
| CISCO-DOT3-OAM-MIB | Manages IEEE 802.3ah Ethernet OAM on Cisco devices, monitoring OAM discovery, link events, and remote loopback operations. |
| CISCO-DS0-CROSS-CONNECT-MIB | Manages DS0 time-slot cross-connect configurations on Cisco voice gateways and digital cross-connect systems. |
| CISCO-DS0BUNDLE-EXT-MIB | Provides Cisco-specific extensions for DS0 bundle management, supplementing standard DS0 bundle objects with additional configuration. |
| CISCO-DS0BUNDLE-MIB | Manages DS0 channel bundles on Cisco WAN interfaces, configuring time-slot groupings for voice and data circuit aggregation. |
| CISCO-DS1-CAPABILITY | Defines SNMP agent capability statements for DS1/T1 interface management MIB on Cisco router and gateway platforms. |
| CISCO-DS1-EXT-MIB | Provides Cisco-specific extensions to DS1/T1 interface management, adding proprietary performance and configuration objects. |
| CISCO-DS3-CAPABILITY | Defines SNMP agent capability statements for DS3/T3 interface management MIB on Cisco platforms. |
| CISCO-DS3-EXT-CAPABILITY | Defines extended SNMP agent capability statements for Cisco-specific DS3/T3 interface management extensions. |
| CISCO-DS3-MIB | Provides Cisco-specific management objects for DS3/T3 interfaces, supplementing RFC 2496 with additional performance and framing controls. |
| CISCO-DSG-IF-EXT-MIB | Provides Cisco-specific extensions for DOCSIS Set-top Gateway (DSG) interface management on Cisco CMTS platforms. |
| CISCO-DSL-PROVISION-MIB | Manages DSL subscriber line provisioning on Cisco platforms, including profile assignment, speed limits, and service activation. |
| CISCO-DSP-MGMT-CAPABILITY | Defines SNMP agent capability statements for Cisco DSP (Digital Signal Processor) resource management MIB. |
| CISCO-DSP-MGMT-MIB | Manages DSP resources on Cisco voice gateways and routers, monitoring channel utilization, codec assignments, and DSP farm status. |
| CISCO-DSPU-MIB | Handles Downstream Physical Unit (DSPU) SNA connectivity on Cisco devices, enabling emulation of IBM cluster controllers over IP networks. |
| CISCO-DTI-EXT-MIB | Manages Cisco DTI (Digital Timing Interface) timing distribution extensions for synchronizing cable plant and CMTS equipment. |
| CISCO-DYNAMIC-ARP-INSPECTION-CAPABILITY | Defines SNMP agent capability statements for Cisco Dynamic ARP Inspection security MIB on Catalyst switch platforms. |
| CISCO-DYNAMIC-ARP-INSPECTION-MIB | Manages Dynamic ARP Inspection (DAI) on Cisco switches, monitoring ARP packet validation, binding table entries, and violation counts. |
| CISCO-DYNAMIC-PORT-VSAN-MIB | Manages dynamic port VSAN assignment in Cisco MDS SAN fabrics, automating VSAN membership based on device login attributes. |
| CISCO-DYNAMIC-TEMPLATE-MIB | Manages dynamic subscriber policy templates on Cisco IOS/IOS-XE, controlling per-subscriber service activation and parameter assignment. |
| CISCO-DYNAMIC-TEMPLATE-TC-MIB | Defines textual conventions used by the Cisco Dynamic Template MIB for subscriber policy management. |
| CISCO-EIGRP-MIB IPNM ✓ | Provides SNMP management of EIGRP routing processes over IPv4 and IPv6, including interface, neighbor, topology, and traffic statistics tables. |
| CISCO-EMBEDDED-EVENT-MGR-MIB | Manages Cisco Embedded Event Manager (EEM) policies and applets, monitoring event detection triggers and automated action execution. |
| CISCO-ENERGYWISE-MIB | Manages Cisco EnergyWise power management, monitoring device power consumption, applying power budgets, and controlling endpoint power states. |
| CISCO-ENH-IPSEC-FLOW-CAPABILITY | Defines SNMP agent capability statements for Cisco enhanced IPSec flow monitoring MIB on IOS security platforms. |
| CISCO-ENHANCED-IMAGE-CAPABILITY | Defines SNMP agent capability statements for Cisco Enhanced Image MIB used for IOS software image management. |
| CISCO-ENHANCED-IMAGE-MIB | Manages Cisco IOS software images, tracking installed image metadata, feature sets, and flash storage allocation. |
| CISCO-ENHANCED-IPSEC-FLOW-MIB | Monitors IPSec tunnel flow statistics on Cisco security devices, tracking SA negotiations, encrypted packet counts, and flow lifetimes. |
| CISCO-ENHANCED-MEMPOOL-CAPABILITY | Defines SNMP agent capability statements for Cisco Enhanced Memory Pool MIB on IOS and NX-OS platforms. |
| CISCO-ENHANCED-MEMPOOL-MIB IPNM ✓ | Monitors memory pool statistics across all physical entities (line cards, route processors) with utilization data at 1-minute, 5-minute, and 10-minute intervals. |
| CISCO-ENHANCED-SLB-CAPABILITY | Defines SNMP agent capability statements for Cisco Enhanced Server Load Balancing MIB on content switching platforms. |
| CISCO-ENHANCED-SLB-MIB | Manages Cisco enhanced server load balancing, monitoring virtual server configurations, real server health, and connection distribution. |
| CISCO-ENHANCED-WRED-MIB | Manages Cisco enhanced Weighted Random Early Detection (WRED) QoS, configuring drop thresholds and monitoring queue discard statistics. |
| CISCO-ENTITY-ALARM-MIB IPNM ✓ | Supports monitoring of alarms generated by physical entities (chassis, modules, ports, power supplies) identified in the Entity-MIB entPhysicalTable. |
| CISCO-ENTITY-ASSET-CAPABILITY | Defines SNMP agent capability statements for Cisco Entity Asset MIB tracking hardware inventory and asset attributes. |
| CISCO-ENTITY-ASSET-MIB IPNM ✓ | Extends the ENTITY-MIB with asset-tracking information including part numbers, serial numbers, hardware revisions, and firmware/software identifiers for physical entities. |
| CISCO-ENTITY-CAPABILITY | Defines SNMP agent capability statements for the Cisco physical entity MIB on supported hardware platforms. |
| CISCO-ENTITY-DIAG-CAPABILITY | Defines SNMP agent capability statements for Cisco Entity Diagnostics MIB on supported hardware platforms. |
| CISCO-ENTITY-DIAG-MIB | Manages hardware diagnostics for Cisco entity components, tracking test results, diagnostic schedules, and hardware health checks. |
| CISCO-ENTITY-DIAG-TC-MIB | Defines textual conventions for Cisco entity diagnostics MIBs, providing consistent type definitions for diagnostic result codes. |
| CISCO-ENTITY-DISPLAY-CAPABILITY | Defines SNMP agent capability statements for Cisco Entity Display MIB managing front panel and LCD display components. |
| CISCO-ENTITY-DISPLAY-MIB | Manages front panel display and LED indicators on Cisco devices, monitoring display text, backlight status, and visual alerts. |
| CISCO-ENTITY-EXT-CAPABILITY | Defines SNMP agent capability statements for Cisco Entity Extension MIB providing additional physical component attributes. |
| CISCO-ENTITY-EXT-MIB IPNM ✓ | Extends the ENTITY-MIB entPhysicalTable with Cisco-specific information for modules that have a CPU, RAM/NVRAM, and configuration register. |
| CISCO-ENTITY-FRU-CONTROL-CAPABILITY | Defines SNMP agent capability statements for Cisco Entity FRU Control MIB managing field-replaceable unit power and reset. |
| CISCO-ENTITY-FRU-CONTROL-MIB IPNM ✓ | Monitors and configures the administrative and operational status of field-replaceable units (FRUs) such as power supplies and line cards listed in the ENTITY-MIB. |
| CISCO-ENTITY-PERFORMANCE-MIB | Monitors utilization and throughput performance metrics for Cisco physical entity components such as line cards and processors. |
| CISCO-ENTITY-PFE-MIB | Manages Cisco Packet Forwarding Engine (PFE) hardware entities, monitoring forwarding plane performance and resource utilization. |
| CISCO-ENTITY-PROVISIONING-MIB | Manages provisioning operations for Cisco hardware entities, tracking module insertion, activation, and configuration deployment. |
| CISCO-ENTITY-QFP-MIB | Monitors Cisco Quantum Flow Processor (QFP) ASIC utilization, packet processing statistics, and forwarding engine performance. |
| CISCO-ENTITY-REDUNDANCY-MIB | Manages hardware redundancy on Cisco chassis platforms, monitoring supervisor/line card switchover state and redundancy group status. |
| CISCO-ENTITY-REDUNDANCY-TC-MIB | Defines textual conventions for Cisco entity redundancy MIBs, providing data types for redundancy roles and switchover reasons. |
| CISCO-ENTITY-SENSOR-CAPABILITY | Defines SNMP agent capability statements for Cisco Entity Sensor MIB managing environmental sensors on hardware platforms. |
| CISCO-ENTITY-SENSOR-EXT-MIB | Extends standard entity sensor management with Cisco-specific threshold alarms and sensor calibration objects. |
| CISCO-ENTITY-SENSOR-HISTORY-MIB | Records historical sensor readings for Cisco physical entity sensors, enabling trend analysis of temperature, voltage, and current. |
| CISCO-ENTITY-SENSOR-MIB IPNM ✓ | Monitors sensor values and thresholds for physical entities (temperature, voltage, current, power sensors) listed in the ENTITY-MIB entPhysicalTable. |
| CISCO-ENTITY-SENSOR-RFC-CAPABILITY | Declares SNMP agent capability statements for the ENTITY-SENSOR-MIB (RFC 3433) as implemented on Cisco platforms. |
| CISCO-ENTITY-VENDORTYPE-OID-MIB | Defines Cisco-specific vendor type OIDs used to identify physical entities in the ENTITY-MIB entPhysicalVendorType field. |
| CISCO-ENVMON-CAPABILITY | Declares SNMP agent capability statements for the CISCO-ENVMON-MIB environmental monitoring implementation on various Cisco platforms. |
| CISCO-ENVMON-MIB IPNM ✓ | Monitors environmental conditions on Cisco devices including temperature, voltage, fan, and power supply status. |
| CISCO-EPC-GATEWAY-MIB | Provides management objects for monitoring and configuring the Cisco Evolved Packet Core (EPC) gateway in LTE mobile networks. |
| CISCO-EPM-NOTIFICATION-MIB IPNM ✓ | Defines SNMP notification objects for Cisco Evolved Programmable Network Manager, enabling forwarding of alarms and events as SNMP traps. |
| CISCO-ERM-CAPABILITY | Declares SNMP agent capability statements for the CISCO-ERM-MIB Embedded Resource Manager implementation on Cisco platforms. |
| CISCO-ERM-MIB | Provides management objects for the Cisco Embedded Resource Manager (ERM), monitoring CPU, memory, and resource thresholds on routers and switches. |
| CISCO-ERR-DISABLE-CAPABILITY | Declares SNMP agent capability statements for the CISCO-ERR-DISABLE-MIB error-disable port recovery feature on Cisco platforms. |
| CISCO-ERR-DISABLE-MIB | Provides management objects for monitoring and configuring the error-disable port recovery mechanism on Cisco switches and routers. |
| CISCO-ES-STACK-MIB | Provides management objects for monitoring and managing Cisco EtherSwitch module stacking, including stack membership and topology. |
| CISCO-ESC-MIB | Provides management objects for the Cisco Elastic Services Controller (ESC) NFV orchestration platform, including service lifecycle and VNF management. |
| CISCO-ETHER-CFM-CAPABILITY | Declares SNMP agent capability statements for Cisco's 802.1ag Connectivity Fault Management (CFM) Ethernet OAM implementation. |
| CISCO-ETHER-CFM-MIB | Manages Ethernet Connectivity Fault Management (IEEE 802.1ag CFM) on Cisco devices, providing objects and notifications for end-to-end Ethernet OAM fault detection. |
| CISCO-ETHER-WIS-CAPABILITY | States SNMP agent capabilities for how Cisco platforms implement the Ethernet WAN Interface Sublayer (WIS) MIB. |
| CISCO-ETHERLIKE-CAPABILITY | Declares SNMP agent capability statements for the EtherLike-MIB implementation on various Cisco Ethernet interface platforms. |
| CISCO-ETHERLIKE-EXT-CAPABILITY | Declares SNMP agent capability statements for the CISCO-ETHERLIKE-EXT-MIB Ethernet extensions on various Cisco platforms. |
| CISCO-ETHERLIKE-EXT-MIB | Extends the standard EtherLike-MIB with Cisco-specific objects for additional Ethernet interface statistics and configuration. |
| CISCO-ETHERNET-ACCESS-MIB | Provides management objects for configuring and monitoring Cisco Ethernet access interfaces and service demarcation features. |
| CISCO-ETHERNET-FABRIC-EXTENDER-MIB | Provides management objects for managing Cisco Fabric Extender (FEX) devices that extend data center switching fabric connectivity. |
| CISCO-EVC-CAPABILITY | States SNMP agent capability information for Ethernet Virtual Circuit management defined in CISCO-EVC-MIB on Cisco platforms. |
| CISCO-EVC-MIB | Provides management objects for configuring and monitoring Ethernet Virtual Circuits (EVCs) on Cisco carrier Ethernet devices. |
| CISCO-EXT-SCSI-MIB | Provides extended SCSI management objects for monitoring SCSI device discovery, targets, and LUN statistics on Cisco storage networking equipment. |
| CISCO-FABRIC-C12K-MIB | Provides management objects for monitoring the switch fabric components of the Cisco 12000 (GSR) series router chassis. |
| CISCO-FABRIC-HFR-MIB | Provides management objects for monitoring the high-speed fabric (HFR) interconnects on Cisco CRS-1 carrier routing system platforms. |
| CISCO-FABRIC-HFR-MIB-CAPABILITY | Declares SNMP agent capability statements for the CISCO-FABRIC-HFR-MIB implementation on Cisco CRS platforms. |
| CISCO-FABRIC-MCAST-APPL-MIB | Provides management objects for multicast application-layer forwarding across the fabric on Cisco switching platforms. |
| CISCO-FABRIC-MCAST-APPL-MIB-CAPABILITY | Declares SNMP agent capability statements for CISCO-FABRIC-MCAST-APPL-MIB multicast fabric application management. |
| CISCO-FABRIC-MCAST-MIB | Provides management objects for monitoring fabric-level multicast replication and distribution on Cisco high-end platforms. |
| CISCO-FABRIC-MCAST-MIB-CAPABILITY | Declares SNMP agent capability statements for the CISCO-FABRIC-MCAST-MIB implementation on Cisco platforms. |
| CISCO-FABRICPATH-TOPOLOGY-CAPABILITY | Declares SNMP agent capability statements for the CISCO-FABRICPATH-TOPOLOGY-MIB FabricPath L2 routing implementation. |
| CISCO-FABRICPATH-TOPOLOGY-MIB | Provides management objects for monitoring and configuring Cisco FabricPath (TRILL-like) Layer 2 multi-path topology in data center networks. |
| CISCO-FASTHUB-MIB | Provides management objects for monitoring and configuring the Cisco Catalyst FastHub series Ethernet hub devices. |
| CISCO-FC-DEVICE-ALIAS-MIB | Provides management objects for configuring and managing Fibre Channel device aliases (human-readable names for WWNs) on Cisco MDS switches. |
| CISCO-FC-FE-CAPABILITY | Declares SNMP agent capability statements for the Fibre Channel Fabric Element (FE) MIB implementation on Cisco MDS SAN switches. |
| CISCO-FC-FE-MIB | Provides management objects for monitoring Fibre Channel fabric element statistics and port performance on Cisco MDS SAN switches. |
| CISCO-FC-MGMT-MIB | Provides comprehensive Fibre Channel SAN management objects for monitoring fabric topology, name server, and port statistics on Cisco MDS platforms. |
| CISCO-FC-MULTICAST-MIB | Provides management objects for configuring and monitoring Fibre Channel multicast distribution trees and group membership on Cisco SAN switches. |
| CISCO-FC-PM-MIB | Provides performance monitoring (PM) objects for Fibre Channel interfaces, tracking throughput, errors, and utilization on Cisco MDS platforms. |
| CISCO-FC-ROUTE-MIB | Provides management objects for monitoring Fibre Channel routing table entries and inter-fabric routing on Cisco MDS SAN switches. |
| CISCO-FC-SDV-MIB | Provides management objects for configuring Fibre Channel Storage Data Virtualization (SDV) on Cisco MDS storage networking platforms. |
| CISCO-FC-SPAN-MIB | Provides management objects for configuring and monitoring Fibre Channel SPAN (Switched Port Analyzer) sessions on Cisco MDS SAN switches. |
| CISCO-FC-TUNNEL-MIB | Provides management objects for configuring and monitoring Fibre Channel tunneling between fabrics on Cisco MDS SAN switch platforms. |
| CISCO-FCC-MIB | Provides management objects for Fibre Channel Congestion Control (FCC) monitoring and configuration on Cisco MDS SAN switches. |
| CISCO-FCIP-MGMT-EXT-MIB | Extends the standard FCIP management MIB with Cisco-specific objects for FCIP tunnels carrying Fibre Channel traffic over IP networks. |
| CISCO-FCIP-MGMT-MIB | Provides management objects for configuring and monitoring Fibre Channel over IP (FCIP) tunnels and link statistics on Cisco MDS platforms. |
| CISCO-FCOE-MIB | Provides management objects for monitoring and configuring Fibre Channel over Ethernet (FCoE) interfaces and VN-port mappings on Cisco Nexus platforms. |
| CISCO-FCPING-MIB | Provides management objects for initiating and monitoring Fibre Channel ping (echo) operations to test FC fabric connectivity on Cisco MDS platforms. |
| CISCO-FCS-MIB | Provides management objects for the Fibre Channel Fabric Configuration Server (FCS) that distributes fabric topology information across a SAN. |
| CISCO-FCSP-MIB | Provides management objects for configuring and monitoring Fibre Channel Security Protocol (FC-SP) authentication between fabric entities on Cisco MDS switches. |
| CISCO-FCTRACEROUTE-MIB | Provides management objects for executing Fibre Channel traceroute operations to discover end-to-end paths through an FC fabric on Cisco MDS platforms. |
| CISCO-FDMI-MIB | Provides management objects for the Fabric Device Management Interface (FDMI), which registers and queries host bus adapter attributes in a Fibre Channel SAN. |
| CISCO-FEATURE-CONTROL-MIB | Provides management objects for monitoring and controlling feature license activation and status on Cisco IOS and NX-OS platforms. |
| CISCO-FIBRECHANNEL-MIB | Provides base Fibre Channel MIB objects for monitoring FC interface statistics, port states, and fabric connectivity on Cisco SAN devices. |
| CISCO-FICON-MIB | Provides management objects for FICON (Fibre Connection) ports used with IBM mainframe storage connectivity on Cisco MDS SAN switches. |
| CISCO-FILTER-GROUP-MIB | Provides management objects for defining and managing named traffic filter groups applied to network interfaces on Cisco devices. |
| CISCO-FIPS-STATS-MIB | Provides management objects for monitoring FIPS 140 cryptographic compliance statistics on Cisco security appliances and routers. |
| CISCO-FIREPOWER-AAA-MIB | Provides management objects for authentication, authorization, and accounting (AAA) configuration and statistics on Cisco Firepower/UCS platforms. |
| CISCO-FIREPOWER-ADAPTOR-MIB | Provides management objects for monitoring Cisco UCS adapter cards including their ports, firmware, and operational state on Firepower platforms. |
| CISCO-FIREPOWER-BIOS-MIB | Provides management objects for monitoring and configuring BIOS settings and firmware versions on Cisco UCS/Firepower compute nodes. |
| CISCO-FIREPOWER-BMC-MIB | Provides management objects for the Baseboard Management Controller (BMC) on Cisco UCS/Firepower servers, including IPMI-level status. |
| CISCO-FIREPOWER-CALLHOME-MIB | Provides management objects for configuring and monitoring the Call Home feature on Cisco UCS/Firepower platforms for automated event notification. |
| CISCO-FIREPOWER-CAPABILITY-MIB | Defines capability and feature-set objects for Cisco UCS/Firepower platform components including supported hardware configurations. |
| CISCO-FIREPOWER-CHANGE-MIB | Provides management objects for tracking configuration change events and audit log entries on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-CIMCVMEDIA-MIB | Provides management objects for CIMC virtual media (KVM-mounted ISO/disk images) on Cisco UCS/Firepower compute nodes. |
| CISCO-FIREPOWER-COMM-MIB | Provides management objects for communication service settings such as SSH, Telnet, and web access on Cisco UCS/Firepower management platforms. |
| CISCO-FIREPOWER-COMPUTE-MIB | Provides management objects for monitoring compute blade and rack-server hardware resources on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-CONFIG-MIB | Provides management objects for configuration export, import, and backup operations on Cisco UCS/Firepower management platforms. |
| CISCO-FIREPOWER-DCX-MIB | Provides management objects for the Cisco UCS fabric interconnect DCX backplane switching infrastructure on Firepower platforms. |
| CISCO-FIREPOWER-DHCP-MIB | Provides management objects for DHCP client and server configuration on Cisco UCS/Firepower management plane network interfaces. |
| CISCO-FIREPOWER-DIAG-MIB | Provides management objects for diagnostic test status, health checks, and self-test results on Cisco UCS/Firepower hardware components. |
| CISCO-FIREPOWER-DOMAIN-MIB | Provides management objects for UCS domain configuration including naming, time zone settings, and fabric interconnect domain membership. |
| CISCO-FIREPOWER-DPSEC-MIB | Provides management objects for data path security policies and enforcement on Cisco UCS/Firepower platform components. |
| CISCO-FIREPOWER-EPQOS-MIB | Provides management objects for endpoint quality-of-service policy configuration on Cisco UCS/Firepower platform vNICs and adapters. |
| CISCO-FIREPOWER-ETHER-MIB | Provides management objects for Ethernet interface configuration and statistics on Cisco UCS/Firepower fabric interconnect ports. |
| CISCO-FIREPOWER-EVENT-MIB | Provides management objects for monitoring system events, event channels, and event subscriptions on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-EXTMGMT-MIB | Provides management objects for external management interface configuration on Cisco UCS/Firepower fabric interconnects. |
| CISCO-FIREPOWER-EXTPOL-MIB | Provides management objects for external policy resolution and integration settings on Cisco UCS/Firepower management platforms. |
| CISCO-FIREPOWER-EXTVMM-MIB | Provides management objects for external virtual machine manager (VMM) integration with Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-FABRIC-MIB | Provides management objects for fabric interconnect switching infrastructure, port channels, and uplinks on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-FAULT-MIB | Provides management objects for fault management including active faults, fault severity, and fault lifecycle on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-FEATURE-MIB | Provides management objects for licensed feature activation and feature package management on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-FIRMWARE-MIB | Provides management objects for firmware image management, upgrades, and version tracking on Cisco UCS/Firepower hardware components. |
| CISCO-FIREPOWER-FLOWCTRL-MIB | Provides management objects for Ethernet flow control (IEEE 802.3x pause) configuration on Cisco UCS/Firepower fabric interconnect ports. |
| CISCO-FIREPOWER-FSM-MIB | Provides management objects for the Finite State Machine (FSM) task status and progress tracking in Cisco UCS/Firepower operations. |
| CISCO-FIREPOWER-GMETA-MIB | Provides general metadata management objects for Cisco UCS/Firepower platform object model and managed object classification. |
| CISCO-FIREPOWER-HOSTIMG-MIB | Provides management objects for host OS image management and provisioning on Cisco UCS/Firepower compute nodes. |
| CISCO-FIREPOWER-IDENT-MIB | Provides management objects for system and component identity, including UUID assignment and serial number tracking on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-IMGPROV-MIB | Provides management objects for image provisioning workflows and firmware staging on Cisco UCS/Firepower hardware components. |
| CISCO-FIREPOWER-IMGSEC-MIB | Provides management objects for image security verification, signing, and integrity checking on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-IP-MIB | Provides management objects for IP address configuration and routing on management interfaces of Cisco UCS/Firepower fabric interconnects. |
| CISCO-FIREPOWER-IPPOOL-MIB | Provides management objects for IP address pool management used in Cisco UCS/Firepower service profile networking configuration. |
| CISCO-FIREPOWER-IPSEC-MIB | Provides management objects for IPsec tunnel configuration and statistics on Cisco UCS/Firepower security platforms. |
| CISCO-FIREPOWER-IQNPOOL-MIB | Provides management objects for iSCSI Qualified Name (IQN) pool configuration on Cisco UCS/Firepower platforms for iSCSI boot. |
| CISCO-FIREPOWER-LLDP-MIB | Provides management objects for Link Layer Discovery Protocol (LLDP) neighbor information and configuration on Cisco UCS/Firepower fabric interconnects. |
| CISCO-FIREPOWER-LS-MIB | Provides management objects for Logical Server (service profile) configuration and instantiation on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-LSBOOT-MIB | Provides management objects for logical server (service profile) boot order and boot policy configuration on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-LSMAINT-MIB | Provides management objects for logical server maintenance policies including firmware and BIOS update scheduling on Cisco UCS/Firepower. |
| CISCO-FIREPOWER-MACPOOL-MIB | Provides management objects for MAC address pool management used in vNIC configuration on Cisco UCS/Firepower service profiles. |
| CISCO-FIREPOWER-MAPPINGS-MIB | Provides management objects for device-to-profile mapping and logical-to-physical resource associations on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-MEMORY-MIB | Provides management objects for monitoring memory DIMM inventory, speed, capacity, and error statistics on Cisco UCS/Firepower compute nodes. |
| CISCO-FIREPOWER-MGMT-MIB | Provides management objects for UCS Manager management plane configuration including roles, users, and admin settings on Cisco UCS/Firepower. |
| CISCO-FIREPOWER-MIB | Top-level Cisco UCS/Firepower MIB providing root OID registration and overview objects for the entire Firepower/UCS SNMP management framework. |
| CISCO-FIREPOWER-NETWORK-MIB | Provides management objects for network connectivity configuration including VLANs, uplinks, and LAN connectivity on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-NFS-MIB | Provides management objects for NFS mount configuration and storage access on Cisco UCS/Firepower management and compute nodes. |
| CISCO-FIREPOWER-NOTIFS-MIB | Defines SNMP notification (trap) objects for alerting on faults, events, and state changes on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-NWCTRL-MIB | Provides management objects for network control policy configuration governing adapter behavior on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-OBSERVE-MIB | Provides management objects for monitoring observations, threshold events, and trending data on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-ORG-MIB | Provides management objects for hierarchical organization (tenant) management and resource delegation on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-OS-MIB | Provides management objects for monitoring operating system configuration and status on Cisco UCS/Firepower managed compute nodes. |
| CISCO-FIREPOWER-PCI-MIB | Provides management objects for monitoring PCI bus device inventory and PCIe adapter status on Cisco UCS/Firepower compute nodes. |
| CISCO-FIREPOWER-PKI-MIB | Provides management objects for PKI certificate and key pair management on Cisco UCS/Firepower management platforms. |
| CISCO-FIREPOWER-POLICY-MIB | Provides management objects for policy definition, inheritance, and enforcement across Cisco UCS/Firepower service profiles and pools. |
| CISCO-FIREPOWER-PORT-MIB | Provides management objects for physical port configuration, state monitoring, and statistics on Cisco UCS/Firepower fabric interconnect hardware. |
| CISCO-FIREPOWER-POWER-MIB | Provides management objects for power supply inventory, power budget, and redundancy management on Cisco UCS/Firepower chassis and fabric interconnects. |
| CISCO-FIREPOWER-PROC-MIB | Provides management objects for monitoring running processes, CPU utilization, and process health on Cisco UCS/Firepower management nodes. |
| CISCO-FIREPOWER-PROCESSOR-MIB | Supplies management objects to track CPU processor inventory, speed, core count, and status across Cisco UCS/Firepower compute blades. |
| CISCO-FIREPOWER-QOSCLASS-MIB | Provides management objects for QoS class map definition and priority configuration on Cisco UCS/Firepower fabric interconnect platforms. |
| CISCO-FIREPOWER-QUERYRESULT-MIB | Provides management objects for query result set management used by Cisco UCS/Firepower SNMP data retrieval operations. |
| CISCO-FIREPOWER-SM-MIB | Provides management objects for service module configuration and status on Cisco UCS/Firepower chassis service module slots. |
| CISCO-FIREPOWER-SOL-MIB | Provides management objects for Serial over LAN (SoL) console configuration and access on Cisco UCS/Firepower compute nodes. |
| CISCO-FIREPOWER-STATS-MIB | Provides management objects for statistical data collection policies and counters across Cisco UCS/Firepower platform components. |
| CISCO-FIREPOWER-STORAGE-MIB | Provides management objects for local storage controller, disk inventory, RAID configuration, and storage health on Cisco UCS/Firepower compute nodes. |
| CISCO-FIREPOWER-SYSDEBUG-MIB | Provides management objects for system debug, core dump configuration, and troubleshooting settings on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-SYSFILE-MIB | Provides management objects for system file management, log rotation, and file system monitoring on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-TC-MIB | Defines textual conventions used across the Cisco UCS/Firepower SNMP MIB suite for standardized data type definitions. |
| CISCO-FIREPOWER-TOP-MIB | Provides the top-level managed object class hierarchy and root object registration for the Cisco UCS/Firepower SNMP MIB framework. |
| CISCO-FIREPOWER-TRIG-MIB | Provides management objects for trigger-based monitoring and threshold alerting on Cisco UCS/Firepower platform statistics. |
| CISCO-FIREPOWER-UUIDPOOL-MIB | Provides management objects for UUID pool management used in server identity assignment on Cisco UCS/Firepower service profiles. |
| CISCO-FIREPOWER-VERSION-MIB | Provides management objects for system version tracking, software version strings, and release metadata on Cisco UCS/Firepower platforms. |
| CISCO-FIREPOWER-VM-MIB | Provides management objects for virtual machine integration and VM inventory visibility on Cisco UCS/Firepower hypervisor-connected platforms. |
| CISCO-FIREPOWER-VNIC-MIB | Provides management objects for virtual NIC (vNIC) template, instantiation, and statistics on Cisco UCS/Firepower service profiles. |
| CISCO-FIREWALL-MIB IPNM ✓ | Monitors Cisco firewall devices, providing connection statistics and security event information for firewall activity tracking. |
| CISCO-FIREWALL-TC | Defines textual conventions for Cisco firewall MIBs including firewall policy, connection, and rule types. |
| CISCO-FLASH-CAPABILITY | Declares SNMP agent capability statements for the CISCO-FLASH-MIB flash storage management implementation on Cisco platforms. |
| CISCO-FLASH-MIB IPNM ✓ | Manages and queries flash file system data on Cisco devices, including flash partitioning, file listings, and file operations. |
| CISCO-FLEX-LINKS-CAPABILITY | Declares SNMP agent capability statements for the CISCO-FLEX-LINKS-MIB redundant link pair implementation on Cisco switch platforms. |
| CISCO-FLEX-LINKS-MIB | Provides management objects for configuring and monitoring Cisco Flex Links, a Layer 2 redundancy mechanism for Ethernet access ports. |
| CISCO-FLOW-CLONE-MIB | Provides management objects for flow cloning operations that duplicate network traffic flows for monitoring on Cisco platforms. |
| CISCO-FLOW-METADATA-MIB | Provides management objects for associating metadata attributes with network flows for enhanced classification on Cisco platforms. |
| CISCO-FLOW-MONITOR-MIB | Provides management objects for configuring NetFlow/flexible flow monitoring, including flow records, exporters, and monitors on Cisco platforms. |
| CISCO-FLOW-MONITOR-TC-MIB | Defines textual conventions used in Cisco flow monitoring MIBs including flow direction, sampler types, and match field definitions. |
| CISCO-FRAME-RELAY-MIB IPNM ✓ | Provides management objects for Frame Relay interface operations on Cisco devices. |
| CISCO-FSPF-MIB | Provides management objects for Fabric Shortest Path First (FSPF) routing protocol configuration and topology on Cisco MDS Fibre Channel SANs. |
| CISCO-FTP-CLIENT-CAPABILITY | Declares SNMP agent capability statements for the CISCO-FTP-CLIENT-MIB FTP file transfer implementation on Cisco platforms. |
| CISCO-FTP-CLIENT-MIB | Provides management objects for initiating and monitoring FTP file transfers from Cisco devices for configuration and image management. |
| CISCO-GATEKEEPER-MIB | Provides management objects for monitoring H.323 gatekeeper zones, registrations, and call routing on Cisco voice gateways. |
| CISCO-GDOI-MIB | Provides management objects for the Group Domain of Interpretation (GDOI) protocol used in GET VPN group key management on Cisco routers. |
| CISCO-GGSN-CAPABILITY | Declares SNMP agent capability statements for the CISCO-GGSN-MIB GPRS Gateway Support Node implementation on Cisco GGSN platforms. |
| CISCO-GGSN-EXT-MIB | Extends the CISCO-GGSN-MIB with additional objects for monitoring enhanced GPRS gateway functionality on Cisco GGSN platforms. |
| CISCO-GGSN-GEO-MIB | Provides management objects for geographic redundancy and failover of the Cisco GGSN (GPRS Gateway Support Node) in mobile core networks. |
| CISCO-GGSN-MIB | Provides management objects for monitoring and configuring the Cisco GPRS Gateway Support Node (GGSN) including PDP context statistics. |
| CISCO-GGSN-QOS-CAPABILITY | Declares SNMP agent capability statements for the CISCO-GGSN-QOS-MIB quality-of-service implementation on Cisco GGSN platforms. |
| CISCO-GGSN-QOS-MIB | Provides management objects for quality-of-service policy monitoring on Cisco GGSN platforms, including UMTS QoS class statistics. |
| CISCO-GGSN-SERVICE-AWARE-MIB | Provides management objects for service-aware billing and policy enforcement on the Cisco GGSN in GPRS/UMTS mobile core networks. |
| CISCO-GPRS-ACC-PT-CAPABILITY | Declares SNMP agent capability statements for the CISCO-GPRS-ACC-PT-MIB GPRS access point management on Cisco platforms. |
| CISCO-GPRS-ACC-PT-MIB | Provides management objects for monitoring GPRS access points (APNs) on Cisco GGSN including connection and subscriber statistics. |
| CISCO-GPRS-CHARGING-CAPABILITY | Declares SNMP agent capability statements for the CISCO-GPRS-CHARGING-MIB billing and charging gateway implementation. |
| CISCO-GPRS-CHARGING-MIB | Provides management objects for monitoring GPRS charging data record (CDR) generation and transfer to charging gateway functions. |
| CISCO-GPRS-GTP-CAPABILITY | Declares SNMP agent capability statements for the CISCO-GPRS-GTP-MIB GPRS Tunneling Protocol implementation on Cisco platforms. |
| CISCO-GPRS-GTP-MIB | Supplies management objects for tracking GPRS Tunneling Protocol (GTP) tunnels, paths, and statistics on Cisco GGSN/SGSN platforms. |
| CISCO-GPRS-ISGSN-MIB | Provides management objects for monitoring the Cisco iSGSN (intelligent Serving GPRS Support Node) in GPRS mobile network deployments. |
| CISCO-GPRS-L2RLY-MIB | Provides management objects for monitoring the GPRS Layer 2 relay function on Cisco mobile data network equipment. |
| CISCO-GSLB-DNS-CAPABILITY | Declares SNMP agent capability statements for the CISCO-GSLB-DNS-MIB global server load balancing DNS implementation on Cisco platforms. |
| CISCO-GSLB-DNS-MIB | Provides management objects for monitoring DNS-based global server load balancing (GSLB) including virtual servers and DNS queries on Cisco GSS. |
| CISCO-GSLB-HEALTH-MON-CAPABILITY | Declares SNMP agent capability statements for the CISCO-GSLB-HEALTH-MON-MIB server health monitoring on Cisco GSLB platforms. |
| CISCO-GSLB-HEALTH-MON-MIB | Provides management objects for configuring and monitoring health probes for backend servers in Cisco global server load balancing deployments. |
| CISCO-GSLB-SYSTEM-CAPABILITY | Declares SNMP agent capability statements for the CISCO-GSLB-SYSTEM-MIB system-level GSLB management on Cisco platforms. |
| CISCO-GSLB-SYSTEM-MIB | Provides management objects for monitoring system-level status, resources, and operation of the Cisco Global Site Selector (GSS) appliance. |
| CISCO-GSLB-TC-MIB | Defines textual conventions for Cisco Global Server Load Balancing MIBs, including data types for virtual server and health-check configuration. |
| CISCO-GTP-CAPABILITY | Declares SNMP agent capability statements for the CISCO-GTP-MIB GPRS Tunneling Protocol management implementation on Cisco platforms. |
| CISCO-GTP-DIRECTOR-MIB | Provides management objects for the Cisco GTP Director, which load-balances GTP signaling across multiple GGSN nodes in mobile core networks. |
| CISCO-GTP-MIB | Provides management objects for monitoring GTP tunnels, PDP context statistics, and GSN path status on Cisco mobile core network gateways. |
| CISCO-GTPV2-MIB | Provides management objects for monitoring GTPv2-C (GTP version 2 control plane) used in LTE/EPC networks on Cisco mobile gateway platforms. |
| CISCO-GYROAC-MIB | Provides management objects for configuring and monitoring the Cisco GyroAccess WAN optimization and network acceleration platform. |
| CISCO-H225-MIB | Provides management objects for monitoring H.225.0 call signaling and registration, admission, and status (RAS) on Cisco H.323 voice gateways. |
| CISCO-H320-DIAL-CONTROL-MIB | Provides management objects for managing H.320 ISDN-based videoconference dial control on Cisco multimedia routers and gateways. |
| CISCO-H323-TC-MIB | Establishes textual conventions shared across Cisco H.323 VoIP MIBs, covering call types, endpoint types, and bandwidth values. |
| CISCO-H324-DIAL-CONTROL-MIB | Provides management objects for managing H.324 analog multimedia dial control on Cisco voice gateways for modem-based videoconferencing. |
| CISCO-HARDWARE-IP-VERIFY-CAPABILITY | Declares SNMP agent capability statements for the CISCO-HARDWARE-IP-VERIFY-MIB hardware-accelerated uRPF implementation. |
| CISCO-HARDWARE-IP-VERIFY-MIB | Provides management objects for monitoring hardware-based IP source verification (uRPF) statistics on Cisco platforms. |
| CISCO-HC-ALARM-CAPABILITY | Declares SNMP agent capability statements for the CISCO-HC-ALARM-MIB high-capacity RMON alarm implementation on Cisco platforms. |
| CISCO-HC-ALARM-MIB | Provides management objects for configuring high-capacity RMON alarms that support 64-bit counter thresholds on Cisco platforms. |
| CISCO-HC-RMON-CAPABILITY | Declares SNMP agent capability statements for the high-capacity RMON MIB 64-bit statistics implementation on Cisco platforms. |
| CISCO-HEALTH-MONITOR-MIB | Provides management objects for monitoring the health of server processes and applications on Cisco IOS platforms with embedded server functions. |
| CISCO-HOST-RESOURCES-CAPABILITY | Declares SNMP agent capability statements for the HOST-RESOURCES-MIB implementation on various Cisco IOS and NX-OS platforms. |
| CISCO-HSRP-CAPABILITY | Declares SNMP agent capability statements for the CISCO-HSRP-MIB Hot Standby Router Protocol implementation on Cisco platforms. |
| CISCO-HSRP-EXT-CAPABILITY | Declares SNMP agent capability statements for the CISCO-HSRP-EXT-MIB extended HSRP objects on various Cisco platforms. |
| CISCO-HSRP-EXT-MIB | Extends the CISCO-HSRP-MIB with additional objects for tracking HSRP group interface associations and secondary addresses on Cisco devices. |
| CISCO-HSRP-MIB IPNM ✓ | Monitors and configures the Hot Standby Router Protocol (HSRP) for first-hop gateway redundancy on Cisco devices. |
| CISCO-HW-MODULE-CONTROL-CAPABILITY | Declares SNMP agent capability statements for the CISCO-HW-MODULE-CONTROL-MIB hardware module power management on Cisco platforms. |
| CISCO-HW-MODULE-CONTROL-MIB | Provides management objects for controlling power-on, power-off, and reset operations for hardware modules in Cisco router and switch chassis. |
| CISCO-ICSUDSU-MIB | Provides management objects for monitoring and configuring the integrated CSU/DSU WAN interface on Cisco routers and access platforms. |
| CISCO-IDSL-LINE-MIB | Provides management objects for monitoring and configuring IDSL (ISDN-based DSL) line parameters and performance on Cisco DSL equipment. |
| CISCO-IE1000-MIB | Provides management objects for managing the Cisco IE1000 industrial Ethernet switch series including port status and switch configuration. |
| CISCO-IEEE8021-CFM-CAPABILITY | Declares SNMP agent capability statements for the IEEE 802.1ag CFM Ethernet OAM MIB implementation on Cisco platforms. |
| CISCO-IEEE8021-CFM-EXT-CAPABILITY | Declares SNMP agent capability statements for the CISCO-IEEE8021-CFM-EXT-MIB 802.1ag CFM extensions on Cisco platforms. |
| CISCO-IEEE8021-CFM-EXT-MIB | Extends the IEEE 802.1ag Connectivity Fault Management MIB with Cisco-specific OAM enhancements for Ethernet link monitoring. |
| CISCO-IEEE8021-CFM-V2-CAPABILITY | States SNMP agent capabilities for Cisco Carrier Ethernet platforms' implementation of IEEE 802.1ag CFM version 2. |
| CISCO-IEEE8021-PAE-CAPABILITY | Declares SNMP agent capability statements for the IEEE 802.1X Port Access Entity MIB implementation on Cisco switches. |
| CISCO-IEEE8023-LAG-CAPABILITY | Declares SNMP agent capability statements for the IEEE 802.3ad Link Aggregation (LAG) MIB implementation on Cisco platforms. |
| CISCO-IETF-ATM2-PVCTRAP-MIB | Provides Cisco-specific extensions to the IETF ATM2 MIB for PVC failure and recovery trap notifications on Cisco ATM platforms. |
| CISCO-IETF-BFD-MIB | Provides Cisco-specific extensions to the IETF BFD MIB for configuring and monitoring Bidirectional Forwarding Detection sessions. |
| CISCO-IETF-DHCP-SERVER-CAPABILITY | Declares SNMP agent capability statements for the IETF DHCP server MIB implementation on Cisco IOS platforms. |
| CISCO-IETF-DHCP-SERVER-EXT-CAPABILITY | Declares SNMP agent capability statements for the CISCO-IETF-DHCP-SERVER-EXT-MIB extended DHCP server management on Cisco platforms. |
| CISCO-IETF-DHCP-SERVER-EXT-MIB | Extends the IETF DHCP server MIB with Cisco-specific objects for enhanced DHCP pool and lease management on Cisco IOS platforms. |
| CISCO-IETF-DHCP-SERVER-MIB | Provides Cisco implementation of the IETF DHCP server MIB for monitoring DHCP address pools, bindings, and server statistics. |
| CISCO-IETF-DOT11-QOS-EXT-MIB | Extends 802.11 QoS management with Cisco-specific enhancements for wireless LAN quality-of-service parameters. |
| CISCO-IETF-DOT11-QOS-MIB | Manages QoS parameters for IEEE 802.11 wireless interfaces, including traffic categories and admission control. |
| CISCO-IETF-FRR-CAPABILITY | Declares SNMP agent capabilities for the Cisco IETF Fast Reroute MIB on various IOS platforms. |
| CISCO-IETF-FRR-MIB | Manages MPLS Fast Reroute (FRR) tunnels and bypass paths for rapid traffic protection in MPLS networks. |
| CISCO-IETF-IP-FORWARD-MIB | Cisco adaptation of the IETF IP forwarding table MIB for managing unicast and multicast route entries. |
| CISCO-IETF-IP-MIB IPNM ✓ | Cisco implementation of a draft replacement for the IP-MIB, providing extended IP management objects until the IETF standard was finalized. |
| CISCO-IETF-IPMROUTE-CAPABILITY | Declares agent capabilities for the Cisco IETF IP multicast routing MIB on supported platforms. |
| CISCO-IETF-IPMROUTE-MIB | Monitors IP multicast routing state, including multicast route tables and packet statistics for multicast protocols. |
| CISCO-IETF-ISIS-CAPABILITY | Declares SNMP agent capabilities for the Cisco IETF IS-IS routing protocol MIB. |
| CISCO-IETF-ISIS-MIB | Manages IS-IS routing protocol instances, adjacencies, and link-state database entries on Cisco devices. |
| CISCO-IETF-ISNS-MGMT-MIB | Manages Internet Storage Name Service (iSNS) servers for Fibre Channel and iSCSI storage device discovery. |
| CISCO-IETF-MEGACO-MIB | Manages Megaco/H.248 media gateway control protocol connections, terminations, and contexts. |
| CISCO-IETF-MPLS-ID-STD-03-MIB | Provides MPLS node and domain identifiers as defined in IETF draft standards for MPLS network management. |
| CISCO-IETF-MPLS-TE-EXT-STD-03-MIB | Adds node and link identifiers from IETF draft standard extensions to the MPLS Traffic Engineering MIB. |
| CISCO-IETF-MPLS-TE-P2MP-STD-MIB | Covers point-to-multipoint MPLS Traffic Engineering tunnels as defined by the IETF draft standard. |
| CISCO-IETF-MPLS-VPN-CAPABILITY | Declares agent capability for the IETF MPLS L3VPN MIB on Cisco devices. |
| CISCO-IETF-MSDP-MIB | Implements the IETF MSDP MIB for managing Multicast Source Discovery Protocol peers and SA cache. |
| CISCO-IETF-NAT-CAPABILITY | Declares agent capability for the IETF NAT MIB on Cisco platforms. |
| CISCO-IETF-NAT-MIB IPNM ✓ | Contains objects for monitoring and managing Network Address Translation (NAT) operations including NAT configuration, address bindings, and runtime statistics. |
| CISCO-IETF-PIM-CAPABILITY | Declares SNMP agent capabilities for the Cisco IETF Protocol Independent Multicast (PIM) MIB. |
| CISCO-IETF-PIM-EXT-CAPABILITY | Declares agent capability for Cisco extensions to the IETF PIM MIB. |
| CISCO-IETF-PIM-EXT-MIB | Extends the IETF PIM MIB with Cisco-specific objects for Protocol Independent Multicast management. |
| CISCO-IETF-PIM-MIB | Manages PIM multicast routing protocol instances, interfaces, and neighbor relationships on Cisco devices. |
| CISCO-IETF-PPVPN-MPLS-VPN-MIB | Implements the IETF Provider Provisioned VPN MPLS-VPN draft MIB for L3VPN management. |
| CISCO-IETF-PW-ATM-MIB | Manages ATM pseudowire emulation over MPLS/IP networks, including ATM cell relay and AAL5 service configuration. |
| CISCO-IETF-PW-CAPABILITY | Declares SNMP agent capabilities for the Cisco IETF Pseudowire emulation MIB on supported platforms. |
| CISCO-IETF-PW-ENET-CAPABILITY | Declares agent capability for the IETF pseudowire Ethernet MIB on Cisco devices. |
| CISCO-IETF-PW-ENET-MIB | Manages Ethernet pseudowire emulation over packet-switched networks for Ethernet service transport. |
| CISCO-IETF-PW-FR-MIB | Manages Frame Relay pseudowire emulation over packet-switched networks for legacy Frame Relay service transport. |
| CISCO-IETF-PW-MIB IPNM ✓ | Manages pseudowire emulation edge-to-edge (PWE3) connections over MPLS and IP transport networks. |
| CISCO-IETF-PW-MPLS-CAPABILITY | Declares agent capability for the IETF pseudowire MPLS MIB on Cisco devices. |
| CISCO-IETF-PW-MPLS-MIB | Manages the MPLS signaling and forwarding aspects of pseudowire connections including LDP and RSVP bindings. |
| CISCO-IETF-PW-TC-MIB | Defines textual conventions for pseudowire emulation MIBs including encoding types and operational states. |
| CISCO-IETF-PW-TDM-MIB | Manages TDM (Time Division Multiplexing) pseudowire emulation for transporting circuit-mode traffic over packet networks. |
| CISCO-IETF-SCTP-CAPABILITY | Declares agent capability for the IETF SCTP MIB on Cisco platforms. |
| CISCO-IETF-SCTP-EXT-CAPABILITY | Declares agent capability for Cisco extensions to the IETF SCTP MIB. |
| CISCO-IETF-SCTP-EXT-MIB | Extends the IETF SCTP MIB with Cisco-specific objects for Stream Control Transmission Protocol management. |
| CISCO-IETF-SCTP-MIB | Manages SCTP (Stream Control Transmission Protocol) associations, endpoints, and transport statistics. |
| CISCO-IETF-VDSL-LINE-MIB | Provides the IETF VDSL line MIB implementation, covering VDSL interface configuration and statistics on Cisco devices. |
| CISCO-IETF-VPLS-BGP-EXT-MIB | Extends the IETF VPLS BGP MIB for Virtual Private LAN Service BGP signaling management on Cisco devices. |
| CISCO-IETF-VPLS-GENERIC-MIB | Implements the IETF generic VPLS MIB for Virtual Private LAN Service instance management. |
| CISCO-IETF-VPLS-LDP-MIB | Implements the IETF VPLS LDP MIB for managing LDP-signaled Virtual Private LAN Service instances. |
| CISCO-IETF-VRRP-07-MIB | Implements the IETF VRRP draft v7 MIB for Virtual Router Redundancy Protocol configuration and status. |
| CISCO-IETF-VRRP-MIB | Manages VRRP (Virtual Router Redundancy Protocol) instances and master/backup router elections on Cisco devices. |
| CISCO-IF-CALL-SERVICE-MIB | Manages per-interface call service configuration for voice-capable network interfaces. |
| CISCO-IF-CAPABILITY | Declares agent capability for the IETF IF-MIB network interface management on Cisco platforms. |
| CISCO-IF-EXTENSION-CAPABILITY | Declares agent capability for Cisco interface extension MIB objects. |
| CISCO-IF-EXTENSION-MIB IPNM ✓ | Provides Cisco-specific extensions to the standard interfaces MIB including link debounce and carrier-delay settings. |
| CISCO-IF-LINK-CONFIG-MIB | Configures physical interface link parameters such as speed, duplex mode, and auto-negotiation settings. |
| CISCO-IF-LOOPBACK-MIB | Manages loopback interface configuration and operational state on Cisco devices. |
| CISCO-IF-MONITOR-NOTIF-MIB | Monitors network interface state changes and generates notifications for link up/down events. |
| CISCO-IF-THRESHOLD-MIB | Configures threshold-based alarms on per-interface utilization and error rate counters. |
| CISCO-IGMP-FILTER-CAPABILITY | Declares agent capability for the Cisco IGMP multicast group filtering MIB. |
| CISCO-IGMP-FILTER-MIB | Manages IGMP profile-based multicast group filtering on Cisco Layer 2 and Layer 3 interfaces. |
| CISCO-IGMP-SNOOPING-CAPABILITY | Declares agent capability for the Cisco IGMP snooping MIB on Layer 2 switches. |
| CISCO-IGMP-SNOOPING-MIB | Manages IGMP snooping configuration and multicast group membership on Cisco Layer 2 switches. |
| CISCO-IKE-CONF-CAPABILITY | States agent capability information for the Cisco IKE configuration MIB. |
| CISCO-IKE-CONFIGURATION-MIB | Manages IKE phase 1 and phase 2 policy, proposal, and security association configuration for IPsec VPNs. |
| CISCO-IKE-FLOW-CAPABILITY | Declares SNMP agent capabilities for the Cisco IKE flow monitoring MIB on VPN-capable platforms. |
| CISCO-IKE-FLOW-EXT-CAPABILITY | Declares agent capability for Cisco IKE flow statistics extension MIB. |
| CISCO-IKE-FLOW-EXT-MIB | Provides extended IKE flow statistics including tunnel counts, SA lifetimes, and negotiation metrics. |
| CISCO-IKE-FLOW-MIB | Monitors IKE (Internet Key Exchange) phase 1 and phase 2 negotiations and active security associations for IPSec VPNs. |
| CISCO-IMA-CAPABILITY | Declares agent capability for the Cisco IMA (Inverse Multiplexing over ATM) MIB. |
| CISCO-IMA-EXT-CAPABILITY | Declares agent capability for Cisco IMA extension MIB objects. |
| CISCO-IMA-MIB | Manages IMA group and link configuration, status, and statistics for ATM inverse multiplexing. |
| CISCO-IMAGE-CAPABILITY | Declares SNMP agent capabilities for the Cisco IOS image management MIB on supported platforms. |
| CISCO-IMAGE-CHECK-MIB | Manages software image integrity verification using checksums or digital signatures on Cisco devices. |
| CISCO-IMAGE-LICENSE-MGMT-MIB | Manages Cisco IOS software image license entitlements, activation, and compliance tracking. |
| CISCO-IMAGE-MIB IPNM ✓ | Manages Cisco IOS software image attributes including version, feature sets, and flash storage information. |
| CISCO-IMAGE-TC | Defines textual conventions for Cisco software image management MIBs. |
| CISCO-IMAGE-UPGRADE-MIB | Manages automated software image upgrade operations including download, verification, and installation. |
| CISCO-INT-SERV-CAPABILITY | Declares agent capability for Integrated Services (IntServ/RSVP) QoS MIB on Cisco devices. |
| CISCO-INTERFACE-XCVR-MONITOR-MIB | Monitors SFP, XFP, and QSFP optical transceiver digital optical monitoring (DOM) parameters. |
| CISCO-INTERFACETOPN-CAPABILITY | Declares agent capability for the Cisco top-N interface utilization ranking MIB. |
| CISCO-INTERFACETOPN-EXT-CAPABILITY | Declares agent capability for Cisco extensions to the top-N interface utilization MIB. |
| CISCO-INTERFACETOPN-EXT-MIB | Extends top-N interface utilization ranking with additional Cisco-specific metrics and sorting criteria. |
| CISCO-IP-ADDRESS-POOL-MIB | Manages IP address pools used for dynamic address assignment in DHCP and PPP environments. |
| CISCO-IP-ADDRESS-POOL-TC-MIB | Defines textual conventions for Cisco IP address pool management MIBs. |
| CISCO-IP-CAPABILITY | Declares agent capability for the IP protocol stack MIB on Cisco platforms. |
| CISCO-IP-CBR-METRICS-MIB | Monitors IP Constant Bit Rate performance metrics for real-time traffic quality assessment. |
| CISCO-IP-ENCRYPTION-MIB | Manages IP-level encryption configuration and session statistics on Cisco devices. |
| CISCO-IP-FORWARD-CAPABILITY | Declares SNMP agent capabilities for the Cisco IP forwarding table MIB on various IOS platforms. |
| CISCO-IP-IF-CAPABILITY | Declares agent capability for IP interface MIB objects on Cisco platforms. |
| CISCO-IP-IF-MIB IPNM ✓ | Provides managed objects for configuring IP characteristics of device interfaces, including IP helper address table management. |
| CISCO-IP-LOCAL-POOL-MIB | Manages local IP address pools used for dynamic address assignment in dial and VPN access scenarios. |
| CISCO-IP-NW-DISCOVERY-CAPABILITY | Declares agent capability for the Cisco IP network topology discovery MIB. |
| CISCO-IP-NW-DISCOVERY-MIB | Manages automatic IP network topology discovery and neighbor relationship tracking. |
| CISCO-IP-PROTOCOL-FILTER-CAPABILITY | Declares agent capability for the Cisco IP protocol-based access filter MIB. |
| CISCO-IP-PROTOCOL-FILTER-MIB | Manages IP protocol-based packet filtering rules applied to network interfaces. |
| CISCO-IP-RAN-BACKHAUL-CAPABILITY | Declares agent capability for the Cisco IP RAN backhaul management MIB. |
| CISCO-IP-RAN-BACKHAUL-MIB | Manages IP Radio Access Network backhaul links, pseudowires, and cell site connectivity. |
| CISCO-IP-STAT-MIB IPNM ✓ | Provides IP traffic statistics categorized by IP precedence and associated MAC addresses. |
| CISCO-IP-TAP-CAPABILITY | Declares agent capability for the Cisco IP lawful intercept tap MIB. |
| CISCO-IP-TAP-MIB | Manages IP lawful intercept configurations specifying traffic streams to be intercepted and delivered. |
| CISCO-IP-UPLINK-REDIRECT-MIB | Manages IP uplink traffic redirection policies for service insertion and traffic steering. |
| CISCO-IP-URPF-MIB | Configures Unicast Reverse Path Forwarding (uRPF) and reports drop statistics on Cisco interfaces. |
| CISCO-IPMCAST-MIB | Manages the IP multicast forwarding table and related statistics for multicast traffic management. |
| CISCO-IPMROUTE-MIB | Manages IP multicast routing information base (MRIB) entries and multicast routing protocol statistics. |
| CISCO-IPSEC-FLOW-MONITOR-MIB IPNM ✓ | Monitors active IPSec tunnels, security associations, and encrypted traffic flow statistics on Cisco devices. |
| CISCO-IPSEC-MIB IPNM ✓ | Contains objects for configuring and managing IPSec-based Virtual Private Networks (VPNs). |
| CISCO-IPSEC-POLICY-MAP-MIB | Maps IPSec policy entries to the traffic flows and interfaces they protect on Cisco VPN devices. |
| CISCO-IPSEC-PROV-CAPABILITY | Declares agent capability for the Cisco IPsec provisioning MIB. |
| CISCO-IPSEC-PROVISIONING-MIB | Manages IPsec tunnel provisioning including crypto maps, transform sets, and security association parameters. |
| CISCO-IPSEC-SIGNALING-CAPABILITY | Declares agent capability for the Cisco IPsec signaling (IKE) management MIB. |
| CISCO-IPSEC-SIGNALING-MIB | Manages IPsec IKE signaling parameters, phase 1/2 negotiations, and security association state. |
| CISCO-IPSEC-TC | Defines textual conventions for Cisco IPsec MIBs including encryption algorithms and SA types. |
| CISCO-IPSLA-AUTOMEASURE-MIB | Manages IP SLA auto-measurement operations for automatic probe scheduling and threshold-based alerting. |
| CISCO-IPSLA-ECHO-MIB | Manages IP SLA echo (ICMP ping and UDP echo) probe configuration and round-trip time results. |
| CISCO-IPSLA-ETHERNET-CAPABILITY | Declares agent capability for Cisco IP SLA Ethernet (Y.1731) probe management MIB. |
| CISCO-IPSLA-ETHERNET-MIB | Manages IP SLA Ethernet OAM (Y.1731) probes for delay and loss measurement on Ethernet networks. |
| CISCO-IPSLA-JITTER-MIB | Manages IP SLA UDP and ICMP jitter probes for measuring one-way and round-trip delay variation. |
| CISCO-IPSLA-TC-MIB | Defines textual conventions used across Cisco IP SLA MIBs including operation types and statistics identifiers. |
| CISCO-IPSLA-VIDEO-MIB | Manages IP SLA video quality probes measuring MOS, packet loss, and jitter for video traffic. |
| CISCO-IPSLA-VIDEO-PROFILE-CAPABILITY | Declares agent capability for the Cisco IP SLA video quality profile MIB. |
| CISCO-IPSLA-VIDEO-PROFILE-MIB | Manages IP SLA video traffic profiles defining codec parameters and quality thresholds for testing. |
| CISCO-IPV6-CAPABILITY | Declares SNMP agent capabilities for Cisco IPv6 protocol management on various IOS and IOS-XE platforms. |
| CISCO-IPV6-MLD-CAPABILITY | States agent capability information for the MLDv2 (Multicast Listener Discovery) MIB on Cisco IPv6 platforms. |
| CISCO-ISCSI-GW-MIB | Covers sessions, targets, and initiator connectivity for iSCSI gateway (storage virtualization) deployments. |
| CISCO-ISCSI-MIB | Manages iSCSI target and initiator configuration, sessions, connections, and storage access statistics. |
| CISCO-ISDN-MIB IPNM ✓ | Monitors the status of ISDN interfaces on Cisco routers, providing call information and B-channel utilization data. |
| CISCO-ISDNU-IF-MIB | Manages ISDN U-interface configuration, line status, and performance statistics on Cisco devices. |
| CISCO-ISNS-CLIENT-MIB | Manages iSNS (Internet Storage Name Service) client registration and server discovery for IP SANs. |
| CISCO-ISNS-IP-NW-DISCOVERY-MIB | Manages iSNS-based IP SAN topology discovery for mapping storage network entities. |
| CISCO-ITP-ACL-CAPABILITY | Declares agent capability for the Cisco ITP SS7 access control list MIB. |
| CISCO-ITP-ACL-MIB | Manages SS7 access control lists on Cisco IP Transfer Point for signaling traffic filtering. |
| CISCO-ITP-ACT-CAPABILITY | Declares agent capability for the Cisco ITP accounting and traffic statistics MIB. |
| CISCO-ITP-ACT-MIB | Handles ITP SS7 accounting records and per-route traffic statistics used for signaling point analysis. |
| CISCO-ITP-DSMR-MIB | Manages ITP Distributed Short Message Routing (DSMR) configuration and SMS delivery statistics. |
| CISCO-ITP-DSMR-SMPP-MIB | Manages ITP DSMR SMPP (Short Message Peer-to-Peer) protocol connections and message routing. |
| CISCO-ITP-DSMR-UCP-MIB | Manages ITP DSMR UCP (Universal Computer Protocol) connections for SMS message routing. |
| CISCO-ITP-GACT-CAPABILITY | Declares agent capability for the Cisco ITP global accounting MIB. |
| CISCO-ITP-GACT-MIB | Tracks global MSU-level accounting statistics for ITP across all signaling links and routes. |
| CISCO-ITP-GRT-CAPABILITY | Declares agent capability for the Cisco ITP global SS7 routing table MIB. |
| CISCO-ITP-GRT-MIB | Covers the ITP global SS7 routing table used to determine destination point code reachability. |
| CISCO-ITP-GSCCP-CAPABILITY | Declares agent capability for the Cisco ITP global SCCP routing MIB. |
| CISCO-ITP-GSCCP-MIB | Manages ITP global SCCP (Signaling Connection Control Part) routing and subsystem status. |
| CISCO-ITP-GSP-CAPABILITY | Declares agent capability for the Cisco ITP global signaling point MIB. |
| CISCO-ITP-GSP-MIB | Manages ITP global SS7 signaling point configuration and operational status. |
| CISCO-ITP-GSP2-CAPABILITY | Declares agent capability for the Cisco ITP global signaling point version 2 MIB. |
| CISCO-ITP-GSP2-MIB | Manages ITP global SS7 signaling point v2 configuration with enhanced link and route attributes. |
| CISCO-ITP-GTCAP-MIB | Manages ITP TCAP (Transaction Capabilities Application Part) layer statistics and transaction tracking. |
| CISCO-ITP-MLR-CAPABILITY | Declares agent capability for the Cisco ITP Multi-Layer Routing MIB. |
| CISCO-ITP-MLR-MIB | Manages ITP Multi-Layer Routing rules for SS7 message routing based on content above MTP3. |
| CISCO-ITP-MONITOR-CAPABILITY | Declares agent capability for the Cisco ITP SS7 message monitoring MIB. |
| CISCO-ITP-MONITOR-MIB | Manages ITP SS7 message monitoring sessions for signaling traffic capture and analysis. |
| CISCO-ITP-MSU-RATES-CAPABILITY | Declares agent capability for the Cisco ITP MSU rate statistics MIB. |
| CISCO-ITP-MSU-RATES-MIB | Manages ITP Message Signal Unit rate statistics including throughput and congestion metrics. |
| CISCO-ITP-RT-CAPABILITY | Declares agent capability for the Cisco ITP SS7 route table MIB. |
| CISCO-ITP-RT-MIB | Manages ITP SS7 route table entries for destination point code routing decisions. |
| CISCO-ITP-SCCP-CAPABILITY | Declares agent capability for the Cisco ITP SCCP subsystem MIB. |
| CISCO-ITP-SCCP-MIB | Manages ITP SCCP subsystem configuration, global title translation, and concerned point code lists. |
| CISCO-ITP-SP-CAPABILITY | Declares agent capability for the Cisco ITP SS7 signaling point MIB. |
| CISCO-ITP-SP-MIB | Manages ITP SS7 signaling point configuration including point codes, variants, and link sets. |
| CISCO-ITP-SP2-CAPABILITY | Declares agent capability for the Cisco ITP SS7 signaling point version 2 MIB. |
| CISCO-ITP-SP2-MIB | Manages ITP SS7 signaling point v2 configuration with extended link set and network indicator support. |
| CISCO-ITP-TC-MIB | Defines textual conventions for Cisco ITP SS7 and SIGTRAN signaling management MIBs. |
| CISCO-ITP-XUA-CAPABILITY | Declares agent capability for the Cisco ITP SIGTRAN xUA protocol MIB. |
| CISCO-ITP-XUA-MIB | Manages ITP SIGTRAN xUA (M2UA/M3UA/SUA) protocol associations, ASPs, and routing contexts. |
| CISCO-IVR-CAPABILITY | Declares agent capability for the Cisco Inter-VSAN Routing (IVR) Fibre Channel MIB. |
| CISCO-IVR-MIB | Manages Inter-VSAN Routing (IVR) zones, zone sets, and topology for Fibre Channel SAN interconnection. |
| CISCO-JOB-MONITORING-CAPABILITY | Declares agent capability for the print job monitoring (JMP) MIB on Cisco devices. |
| CISCO-L2-CONTROL-CAPABILITY | Declares agent capability for Cisco Layer 2 control protocol tunneling and blocking MIB. |
| CISCO-L2-CONTROL-MIB | Manages Layer 2 control protocol tunneling and filtering for protocols such as STP, VTP, and CDP. |
| CISCO-L2-DEV-MONITORING-MIB | Monitors Layer 2 device health metrics including CPU, memory, and interface error statistics. |
| CISCO-L2-TUNNEL-CONFIG-CAPABILITY | Declares agent capability for Cisco Layer 2 tunnel (L2TPv3/AToM) configuration MIB. |
| CISCO-L2-TUNNEL-CONFIG-MIB | Configures Layer 2 protocol tunneling over provider networks to transparently carry customer L2 control traffic. |
| CISCO-L2L3-INTERFACE-CONFIG-CAPABILITY | Declares agent capability for Cisco Layer 2/Layer 3 interface mode switching configuration MIB. |
| CISCO-L2L3-INTERFACE-CONFIG-MIB | Manages the switching of network interfaces between Layer 2 (switchport) and Layer 3 (routed) modes. |
| CISCO-L2NAT-MIB | Manages Layer 2 Network Address Translation for address rewriting at the Ethernet frame level. |
| CISCO-L4L7MODULE-REDUNDANCY-CAPABILITY | Declares agent capability for Cisco Layer 4-7 service module redundancy MIB. |
| CISCO-L4L7MODULE-REDUNDANCY-MIB | Manages redundancy and failover configuration for Cisco Layer 4-7 service modules. |
| CISCO-L4L7MODULE-RESOURCE-LIMIT-CAPABILITY | Declares agent capability for Cisco Layer 4-7 module resource limit MIB. |
| CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB | Manages resource limits (connections, bandwidth, memory) for Cisco Layer 4-7 service modules. |
| CISCO-LAG-CAPABILITY | Declares agent capability for IEEE 802.3ad Link Aggregation (LACP) MIB on Cisco devices. |
| CISCO-LAG-MIB IPNM ✓ | Manages IEEE 802.3ad Link Aggregation (EtherChannel/port-channel) with Cisco-specific extensions beyond the standard LAG MIB. |
| CISCO-LATITUDE-MIB | Manages Cisco Latitude geographic location and positioning data for network device tracking. |
| CISCO-LEC-DATA-VCC-MIB | Manages LANE LEC (LAN Emulation Client) data Virtual Channel Connection setup and statistics. |
| CISCO-LEC-EXT-MIB | Extends LANE LEC management with Cisco-specific configuration and operational status objects. |
| CISCO-LECS-MIB | Manages ATM LANE Configuration Server (LECS) policy tables and ELAN client assignments. |
| CISCO-LES-MIB | Manages ATM LANE Emulation Server (LES) and Broadcast and Unknown Server (BUS) configuration. |
| CISCO-LICENSE-MGMT-MIB | Manages Cisco software license entitlements, activation keys, and feature license status on network devices. |
| CISCO-LICENSE-MGR-CAPABILITY | Declares agent capability for the Cisco software license manager MIB. |
| CISCO-LICENSE-MGR-MIB | Manages Cisco software license acquisition, storage, and feature activation via the license manager. |
| CISCO-LICENSE-MIB | Tracks Cisco IOS software license entitlements, installed features, and compliance status. |
| CISCO-LINK-ERROR-MONITOR-CAPABILITY | Declares agent capability for the Cisco per-link error rate monitoring MIB. |
| CISCO-LINK-ERROR-MONITOR-MIB | Monitors per-link error rates and generates threshold-based alarms for link quality degradation. |
| CISCO-LISP-EXT-MIB | Extends LISP (Locator/ID Separation Protocol) management with Cisco-specific EID, RLOC, and map cache objects. |
| CISCO-LIVEDATA-MIB | Manages Cisco LiveData real-time analytics platform for contact center reporting and event streaming. |
| CISCO-LLDP-EXT-MED-CAPABILITY | Declares SNMP agent capabilities for the Cisco LLDP-MED (Media Endpoint Discovery) extension MIB. |
| CISCO-LOCAL-AUTH-USER-MIB | Manages local authentication user database entries including credentials and access privileges. |
| CISCO-LOCAL-DIRECTOR-MIB | Manages Cisco LocalDirector legacy load balancer virtual servers, real servers, and session statistics. |
| CISCO-LPTS-MIB | Manages Local Packet Transport Services (LPTS) policers and flow entries that protect the IOS-XR route processor. |
| CISCO-LRE-CPE-MIB | Manages Long Reach Ethernet (LRE) CPE device configuration, line status, and performance statistics. |
| CISCO-LWAPP-AAA-MIB | Manages AAA (Authentication, Authorization, Accounting) configuration for LWAPP-based wireless LAN controllers. |
| CISCO-LWAPP-ACL-MIB | Manages LWAPP/CAPWAP wireless LAN controller ACL rules applied to WLAN traffic. |
| CISCO-LWAPP-AP-MIB IPNM ✓ | Manages Cisco lightweight access points (APs) registered to a wireless LAN controller via the LWAPP protocol. |
| CISCO-LWAPP-CCX-RM-MIB | Manages Cisco Compatible Extensions (CCX) radio management features including client location and measurement. |
| CISCO-LWAPP-CDP-MIB | Manages CDP (Cisco Discovery Protocol) operation and neighbor discovery on LWAPP-managed access points. |
| CISCO-LWAPP-CLIENT-ROAMING-CAPABILITY | Declares agent capability for LWAPP wireless client roaming management on Cisco WLC. |
| CISCO-LWAPP-CLIENT-ROAMING-MIB | Manages wireless client roaming events and fast roaming parameters on Cisco LWAPP wireless controllers. |
| CISCO-LWAPP-CLOUD-SERVICES-MIB | Manages LWAPP WLC cloud services integration including connectivity and service subscription status. |
| CISCO-LWAPP-DHCP-MIB | Manages DHCP proxy and scoping configurations for wireless clients on Cisco LWAPP wireless controllers. |
| CISCO-LWAPP-DOT11-CLIENT-CALIB-CAPABILITY | Declares agent capability for LWAPP 802.11 client radio calibration management on Cisco WLC. |
| CISCO-LWAPP-DOT11-CLIENT-CALIB-MIB | Manages 802.11 client calibration parameters for RF measurement and location services on LWAPP controllers. |
| CISCO-LWAPP-DOT11-CLIENT-CCX-TC-MIB | Defines textual conventions for Cisco Compatible Extensions (CCX) wireless client management MIBs. |
| CISCO-LWAPP-DOT11-LDAP-MIB | Manages LDAP server integration for wireless client authentication on Cisco LWAPP WLC. |
| CISCO-LWAPP-DOT11-MIB | Manages 802.11 wireless parameters on Cisco Wireless LAN Controllers (WLCs) that terminate LWAPP/CAPWAP tunnels from lightweight access points. |
| CISCO-LWAPP-GUEST-LAN-MIB | Manages guest LAN wired port configurations and guest access policies on Cisco LWAPP wireless controllers. |
| CISCO-LWAPP-HA-MIB | Manages LWAPP/CAPWAP wireless LAN controller high availability, SSO, and redundancy state. |
| CISCO-LWAPP-IDS-MIB | Manages wireless intrusion detection signatures and rogue AP detection on Cisco LWAPP wireless controllers. |
| CISCO-LWAPP-INTERFACE-MIB | Manages LWAPP WLC logical interfaces including VLAN mappings, IP addressing, and port assignments. |
| CISCO-LWAPP-LINKTEST-MIB | Manages LWAPP over-the-air link test sessions for measuring wireless signal quality and throughput. |
| CISCO-LWAPP-LOCAL-AUTH-MIB | Manages local EAP authentication server configuration on Cisco LWAPP controllers for autonomous client auth. |
| CISCO-LWAPP-MDNS-MIB | Manages mDNS (Bonjour) gateway configuration on Cisco LWAPP WLC for service discovery across VLANs. |
| CISCO-LWAPP-MESH-LINKTEST-MIB | Manages link test operations between mesh APs on Cisco wireless controllers for backhaul quality assessment. |
| CISCO-LWAPP-MESH-MIB | Manages Cisco wireless mesh network backhaul links, RAP/MAP roles, and mesh topology on LWAPP controllers. |
| CISCO-LWAPP-MFP-CAPABILITY | Declares agent capability for LWAPP Management Frame Protection (MFP) on Cisco WLC. |
| CISCO-LWAPP-MFP-MIB | Manages Management Frame Protection (MFP) settings on Cisco LWAPP controllers to secure 802.11 management frames. |
| CISCO-LWAPP-MOBILITY-EXT-MIB | Provides extended mobility management objects for Cisco wireless controllers including new mobility architecture. |
| CISCO-LWAPP-MOBILITY-MIB | Manages inter-controller wireless client mobility groups and roaming anchor configurations on Cisco WLCs. |
| CISCO-LWAPP-NBAR-MIB | Manages NBAR (Network-Based Application Recognition) application visibility on Cisco LWAPP wireless controllers. |
| CISCO-LWAPP-NETFLOW-MIB | Manages NetFlow traffic export configuration and statistics for Cisco LWAPP-based wireless LAN controllers. |
| CISCO-LWAPP-OPENDNS-MIB | Manages OpenDNS cloud security integration on Cisco wireless LAN controllers for DNS-based policy enforcement. |
| CISCO-LWAPP-QOS-CAPABILITY | Declares SNMP agent capabilities for QoS policy management on Cisco LWAPP wireless controllers. |
| CISCO-LWAPP-RF-CAPABILITY | Declares SNMP agent capabilities for RF (radio frequency) management on Cisco LWAPP wireless controllers. |
| CISCO-LWAPP-RF-MIB | Manages radio frequency parameters including channel, power, and interference for Cisco LWAPP access points. |
| CISCO-LWAPP-RLAN-MIB | Manages Remote LAN (RLAN) port configurations connecting wired devices through Cisco wireless LAN controllers. |
| CISCO-LWAPP-SCHEDULED-WLAN-MIB | Manages time-scheduled WLAN availability windows on Cisco lightweight wireless LAN controllers. |
| CISCO-LWAPP-SYS-CAPABILITY | Declares SNMP agent capabilities for system-level management on Cisco LWAPP wireless LAN controllers. |
| CISCO-LWAPP-TAGS-MIB | Manages policy, site, and RF tags assigned to access points on Cisco wireless LAN controllers. |
| CISCO-LWAPP-TC-MIB | Defines textual conventions used across Cisco LWAPP (Lightweight Access Point Protocol) MIB modules for wireless LAN controller management. |
| CISCO-LWAPP-TSM-CAPABILITY | Declares SNMP agent capabilities for Traffic Stream Metrics on Cisco LWAPP wireless controllers. |
| CISCO-LWAPP-WEBAUTH-CAPABILITY | Declares SNMP agent capabilities for web authentication management on Cisco LWAPP wireless controllers. |
| CISCO-LWAPP-WLAN-MIB | Manages WLAN profiles including SSID, security, and QoS settings on Cisco lightweight wireless controllers. |
| CISCO-LWAPP-WLAN-POLICY-MIB | Manages WLAN policy profiles controlling client access and traffic policies on Cisco wireless controllers. |
| CISCO-LWAPP-WLAN-SECURITY-MIB | Manages WLAN security settings including 802.1X, WPA, and encryption on Cisco LWAPP wireless controllers. |
| CISCO-MAC-AUTH-BYPASS-CAPABILITY | States SNMP agent capabilities related to MAC Authentication Bypass (MAB) on Cisco network access devices. |
| CISCO-MAC-AUTH-BYPASS-MIB | Manages MAC Authentication Bypass configuration allowing non-802.1X devices to authenticate via MAC address. |
| CISCO-MAC-NOTIFICATION-CAPABILITY | Declares SNMP agent capabilities for MAC address change and move notification on Cisco switching platforms. |
| CISCO-MAC-NOTIFICATION-MIB IPNM ✓ | Configures and manages the MAC notification feature, which informs monitoring devices when MAC addresses are learned or removed from the forwarding database. |
| CISCO-MAU-CAPABILITY | Declares SNMP agent capabilities for Medium Attachment Unit (MAU) management on Cisco network interfaces. |
| CISCO-MAU-EXT-CAPABILITY | Declares SNMP agent capabilities for extended Medium Attachment Unit management on Cisco network devices. |
| CISCO-MAU-EXT-MIB | Extends MAU MIB with Cisco-specific physical layer attributes for network interface medium attachment units. |
| CISCO-MDI-METRICS-MIB | Monitors Media Delivery Index metrics measuring video and voice stream quality on Cisco network devices. |
| CISCO-MEDIA-GATEWAY-CAPABILITY | Declares SNMP agent capabilities for H.248/MGCP media gateway management on Cisco voice platforms. |
| CISCO-MEDIA-GATEWAY-MIB IPNM ✓ | Provides managed objects for managing trunk media gateways, including gateway entries, call control attributes, and IP configuration. |
| CISCO-MEDIA-METRICS-MIB | Monitors media stream performance metrics including jitter, latency, and loss on Cisco network devices. |
| CISCO-MEDIA-QUALITY-CAPABILITY | Declares SNMP agent capabilities for media quality monitoring on Cisco voice and video platforms. |
| CISCO-MEDIA-QUALITY-MIB | Monitors voice and video media quality metrics including MOS scores and impairment factors on Cisco devices. |
| CISCO-MEDIATRACE-MIB | Manages Mediatrace path tracing for diagnosing video and voice quality issues across Cisco network paths. |
| CISCO-MEETINGPLACE-MIB | Manages Cisco MeetingPlace conferencing platform including session, resource, and user conference statistics. |
| CISCO-MEGACO-EXT-CAPABILITY | Declares SNMP agent capabilities for H.248/Megaco media gateway control protocol extensions on Cisco gateways. |
| CISCO-MEGACO-EXT-MIB | Extends H.248/Megaco media gateway control protocol management with Cisco-specific attributes and statistics. |
| CISCO-MEMORY-POOL-CAPABILITY | Declares SNMP agent capabilities for memory pool utilization monitoring on Cisco routing and switching platforms. |
| CISCO-MEMORY-POOL-MIB IPNM ✓ | Monitors memory pool statistics on Cisco devices, reporting memory utilization for various memory types and supporting SNMP notifications when buffer thresholds change. |
| CISCO-METRO-PHY-MIB | Manages Metro Ethernet physical layer interfaces including SONET/SDH and optical parameters on Cisco metro devices. |
| CISCO-MGC-CAPABILITY | Declares SNMP agent capabilities for Media Gateway Controller management on Cisco MGX and voice platforms. |
| CISCO-MGC-MIB | Manages Media Gateway Controllers including call routing, signaling links, and trunk group statistics on Cisco MGX. |
| CISCO-MGX82XX-ATM-UNI-PORT-MIB | Manages ATM UNI port configuration and statistics on Cisco MGX 8200 WAN switching platforms. |
| CISCO-MGX82XX-CARD-FEATURE-MIB | Manages feature configuration and capabilities for line cards in Cisco MGX 8200 series WAN switches. |
| CISCO-MGX82XX-DSX1-MIB | Manages DS1/T1 interface configuration and performance statistics on Cisco MGX 8200 WAN switch line cards. |
| CISCO-MGX82XX-DSX3-BERT-MIB | Manages DS3 Bit Error Rate Testing (BERT) operations on Cisco MGX 8200 series WAN switching platforms. |
| CISCO-MGX82XX-DSX3-MIB | Manages DS3/T3 interface configuration and performance statistics on Cisco MGX 8200 WAN switch line cards. |
| CISCO-MGX82XX-ENVMON-MIB | Monitors environmental conditions including temperature, voltage, and fan status on Cisco MGX 8200 chassis. |
| CISCO-MGX82XX-MODULE-RSRC-PART-MIB | Manages module resource partitioning for bandwidth and connection allocation on Cisco MGX 8200 platforms. |
| CISCO-MGX82XX-PXM-CLOCK-MIB | Manages PXM clock source configuration and synchronization timing on Cisco MGX 8200 WAN switch chassis. |
| CISCO-MGX82XX-RPM-CONN-MIB | Manages RPM (Route Processor Module) connection configuration on Cisco MGX 8200 WAN switching platforms. |
| CISCO-MGX82XX-RPM-RSRC-PART-MIB | Manages RPM resource partitioning for ATM and Frame Relay connections on Cisco MGX 8200 platforms. |
| CISCO-MGX82XX-RPM-SUBIF-MIB | Configures RPM subinterfaces and reports their statistics on Cisco MGX 8200 series WAN switching platforms. |
| CISCO-MGX82XX-SONET-MIB | Manages SONET interface configuration and performance monitoring on Cisco MGX 8200 WAN switch line cards. |
| CISCO-MGX82XX-TRAPS-MIB | Defines SNMP trap notifications for fault and status events on Cisco MGX 8200 WAN switching platforms. |
| CISCO-MGX82XX-VIRTUAL-PORT-MIB | Manages virtual port configuration for ATM and Frame Relay connections on Cisco MGX 8200 WAN switches. |
| CISCO-MGX8800-IF-MAPPING-CAPABILITY | Declares SNMP agent capabilities for interface mapping management on Cisco MGX 8800 WAN switching platforms. |
| CISCO-MGX8800-IF-MAPPING-MIB | Manages interface-to-slot/port mapping configuration on Cisco MGX 8800 series WAN switching platforms. |
| CISCO-MIP-CAPABILITY | Declares SNMP agent capabilities for Mobile IP home and foreign agent management on Cisco routing platforms. |
| CISCO-MLD-SNOOPING-CAPABILITY | Declares SNMP agent capabilities for MLD snooping management on Cisco IPv6 multicast switching platforms. |
| CISCO-MLD-SNOOPING-MIB | Manages Multicast Listener Discovery (MLD) snooping for IPv6 multicast traffic control on Cisco switches. |
| CISCO-MMAIL-DIAL-CONTROL-MIB | Manages multimedia mail dial control including fax and voice messaging sessions on Cisco gateway platforms. |
| CISCO-MMODAL-CONTACT-APPS-MIB | Manages Cisco multimodal contact center application statistics including call handling and agent performance. |
| CISCO-MOBILE-IP-CAPABILITY | Declares SNMP agent capabilities for Mobile IP home/foreign agent functions on Cisco routing platforms. |
| CISCO-MOBILE-IP-MIB | Manages Mobile IP home and foreign agent configuration and mobility binding statistics on Cisco routers. |
| CISCO-MOBILE-POLICY-CHARGING-CONTROL-MIB | Manages mobile policy and charging control (PCC) rules and sessions for Cisco mobile packet core elements. |
| CISCO-MOBILITY-TAP-MIB | Manages lawful intercept tap configurations for monitoring mobile subscriber traffic on Cisco platforms. |
| CISCO-MODEM-MGMT-CAPABILITY | Declares SNMP agent capabilities for modem management on Cisco access server and WAN platforms. |
| CISCO-MODEM-MGMT-MIB | Manages analog modem configuration, call statistics, and line quality on Cisco access server platforms. |
| CISCO-MODULE-AUTO-SHUTDOWN-CAPABILITY | Declares SNMP agent capabilities for automatic module shutdown on Cisco modular routing and switching platforms. |
| CISCO-MODULE-AUTO-SHUTDOWN-MIB | Manages automatic shutdown of faulty line card modules to protect chassis integrity on Cisco modular platforms. |
| CISCO-MODULE-VIRTUALIZATION-CAPABILITY | Declares SNMP agent capabilities for module virtualization on Cisco modular routing and switching platforms. |
| CISCO-MODULE-VIRTUALIZATION-MIB | Manages virtual partitioning of physical line card modules into logical instances on Cisco modular platforms. |
| CISCO-MPLS-LSR-EXT-STD-MIB | Extends IETF MPLS LSR MIB with Cisco-specific label switching router statistics and configuration objects. |
| CISCO-MPLS-TC-EXT-STD-MIB | Adds Cisco-specific textual conventions to the IETF MPLS TC MIB to support label switching management. |
| CISCO-MPLS-TE-STD-EXT-MIB | Adds Cisco-specific TE tunnel attributes and performance statistics to the IETF MPLS Traffic Engineering MIB. |
| CISCO-MPOA-EXT-MIB | Extends Multiprotocol Over ATM (MPOA) management with Cisco-specific client and server configuration objects. |
| CISCO-MRP-MIB | Manages Media Redundancy Protocol (MRP) ring configuration and status on Cisco industrial Ethernet switches. |
| CISCO-MSATA-MIB | Manages mSATA solid-state drive storage modules installed in Cisco routers for logging and data storage. |
| CISCO-MSP-MIB | Manages Multicast Service Provider configuration and multicast tree statistics on Cisco routing platforms. |
| CISCO-MVPN-MIB | Manages Multicast VPN (MVPN) including MDT tunnels, PIM configuration, and multicast routing in VPN contexts. |
| CISCO-NAC-NAD-CAPABILITY | Declares SNMP agent capabilities for Network Admission Control Network Access Device functions on Cisco platforms. |
| CISCO-NAC-NAD-MIB | Manages Network Admission Control (NAC) on Cisco network access devices for host posture validation and enforcement. |
| CISCO-NAC-TC-MIB | Defines textual conventions for Network Admission Control (NAC) data types used in Cisco NAC MIB modules. |
| CISCO-NAT-CGN-EXT-MIB | Manages Carrier-Grade NAT (CGN) address translation pools, mappings, and statistics on Cisco service provider routers. |
| CISCO-NAT-EXT-MIB | Extends NAT management with Cisco-specific address translation statistics and session tracking on Cisco routers. |
| CISCO-NBAR-PROTOCOL-DISCOVERY-MIB | Monitors NBAR protocol discovery statistics classifying application traffic by protocol on Cisco router interfaces. |
| CISCO-NDE-CAPABILITY | States SNMP agent capabilities for configuring NetFlow Data Export on Cisco routing and switching platforms. |
| CISCO-NDE-MIB | Manages NetFlow Data Export (NDE) collector destinations and flow export parameters on Cisco network devices. |
| CISCO-NETFLOW-CAPABILITY | Declares SNMP agent capabilities for NetFlow traffic analysis and export on Cisco routing platforms. |
| CISCO-NETFLOW-LITE-MIB | Manages lightweight NetFlow sampling configuration and export statistics on Cisco switching and routing platforms. |
| CISCO-NETFLOW-MIB IPNM ✓ | Manages NetFlow cache configuration and export settings, providing traffic flow statistics organized by protocol and port. |
| CISCO-NETINT-CAPABILITY | Declares SNMP agent capabilities for network interrupt coalescing and CPU interrupt management on Cisco platforms. |
| CISCO-NETINT-MIB | Manages network interrupt statistics and coalescing configuration for CPU protection on Cisco routing platforms. |
| CISCO-NETSYNC-MIB | Manages SyncE and PTP network synchronization clock sources and quality levels on Cisco routing platforms. |
| CISCO-NETWORK-REGISTRAR-MIB | Manages Cisco Network Registrar DHCP and DNS services including scope, lease, and zone statistics. |
| CISCO-NETWORK-VIRTUALIZATION-OVERLAY-MIB | Manages VXLAN and NVO network virtualization overlay tunnels and VNI mappings on Cisco data center devices. |
| CISCO-NHRP-EXT-MIB | Extends NHRP management with Cisco-specific attributes for DMVPN spoke-to-spoke tunnel establishment. |
| CISCO-NMS-APPL-HEALTH-MIB | Tracks the health and availability of Cisco NMS application components, including process and service status. |
| CISCO-NOTIFICATION-CONTROL-MIB | Manages SNMP notification rate limiting and filtering to control trap generation on Cisco network devices. |
| CISCO-NOTIFICATION-LOG-CAPABILITY | Declares SNMP agent capabilities for notification logging management on Cisco routing and switching platforms. |
| CISCO-NPORT-VIRTUALIZATION-MIB | Manages Fibre Channel N-Port ID Virtualization (NPIV) virtual N-Ports on Cisco MDS SAN switches. |
| CISCO-NS-MIB | Manages the Fibre Channel Name Server database and zone membership on Cisco MDS series SAN switches. |
| CISCO-NTP-CAPABILITY | Declares SNMP agent capabilities for NTP clock synchronization management on Cisco routing and switching platforms. |
| CISCO-NTP-MIB IPNM ✓ | Monitors NTP time synchronization status and configuration on Cisco devices, providing information about NTP peers and clock accuracy. |
| CISCO-OAM-MIB | Manages OAM (Operations, Administration, and Maintenance) loopback and continuity checks for ATM and Ethernet. |
| CISCO-OBMI-MIB | Manages Out-of-Band Management Interface configuration and connectivity on Cisco network devices. |
| CISCO-OPTICAL-IF-CROSS-CONNECT-MIB | Manages optical cross-connect switching for configuring and monitoring signal path connections across optical interfaces. |
| CISCO-OPTICAL-IF-EXTN-MIB | Extends standard optical interface MIB with Cisco-specific attributes for optical transceiver and port management. |
| CISCO-OPTICAL-MIB | Provides general optical transport management including configuration and status for Cisco optical networking equipment. |
| CISCO-OPTICAL-MONITOR-CAPABILITY | Declares agent capabilities for the Cisco optical monitoring MIB on supported platforms. |
| CISCO-OPTICAL-MONITOR-MIB | Monitors optical signal power, wavelength, and OSNR parameters on Cisco optical transport network platforms. |
| CISCO-OPTICAL-MONITORING-MIB | Monitors optical signal parameters such as power levels, wavelength, and signal quality on optical interfaces. |
| CISCO-OPTICAL-OTS-MIB | Manages Optical Transport Section (OTS) layer parameters including amplifier and span configuration on DWDM systems. |
| CISCO-OPTICAL-PATCH-MIB | Manages optical patch panel cross-connect configurations on Cisco optical networking and transport platforms. |
| CISCO-OSCP-MIB | Manages the Optical Supervisory Channel Protocol (OSCP) for out-of-band control communication on optical transport links. |
| CISCO-OSPF-MIB IPNM ✓ | Manages Cisco-specific OSPF routing protocol implementation details including sham link support, extending the standard OSPF-MIB. |
| CISCO-OSPF-TRAP-MIB | Defines Cisco OSPF-specific SNMP trap notifications for link state and neighbor adjacency change events. |
| CISCO-OTN-IF-CAPABILITY | Declares agent capabilities for OTN (Optical Transport Network / G.709) interface management on Cisco platforms. |
| CISCO-OTN-IF-MIB | Manages Optical Transport Network (OTN/G.709) interface configuration and performance on Cisco optical platforms. |
| CISCO-OTV-CAPABILITY | Declares agent capabilities for OTV (Overlay Transport Virtualization) Layer 2 extension over IP networks. |
| CISCO-OTV-MIB | Manages Overlay Transport Virtualization (OTV) configuration extending Layer 2 domains across Cisco data centers. |
| CISCO-OUTAGE-MONITOR-MIB | Monitors and records network outage events including duration and affected interfaces on Cisco network devices. |
| CISCO-P-BRIDGE-CAPABILITY | Declares SNMP agent capabilities for Provider Bridge (802.1ad) management on Cisco switching platforms. |
| CISCO-P2P-IF-MIB | Manages point-to-point interfaces including configuration and operational status for serial and leased-line connections. |
| CISCO-PACKET-CAPTURE-CAPABILITY | Declares SNMP agent capabilities for packet capture and sniffing operations on Cisco routing and switching platforms. |
| CISCO-PACKET-CAPTURE-MIB | Manages packet capture sessions including filters, buffer size, and captured frame retrieval on Cisco devices. |
| CISCO-PAE-CAPABILITY | Declares SNMP agent capabilities for Port Access Entity (802.1X) management on Cisco switching platforms. |
| CISCO-PAE-MIB | Extends IEEE 802.1X Port Access Entity management with Cisco-specific supplicant and authenticator objects. |
| CISCO-PAGP-CAPABILITY | Declares agent capabilities for the Port Aggregation Protocol (PAgP) used in Cisco EtherChannel link bundling. |
| CISCO-PAGP-MIB | Manages Port Aggregation Protocol (PAgP) EtherChannel negotiation and bundled port statistics on Cisco switches. |
| CISCO-PFC-EXT-CAPABILITY | Declares SNMP agent capabilities for Priority Flow Control extensions on Cisco DCB/FCoE switching platforms. |
| CISCO-PFC-EXT-MIB | Extends Priority Flow Control (PFC) management for DCB and FCoE traffic on Cisco data center switches. |
| CISCO-PFR-MIB | Manages Performance Routing (PfR/OER) policy, path selection, and WAN link performance on Cisco routers. |
| CISCO-PIM-MIB | Extends Protocol Independent Multicast management with Cisco-specific PIM-SM and PIM-DM configuration objects. |
| CISCO-PING-CAPABILITY | Declares SNMP agent capabilities for ICMP ping test operations on Cisco routing and switching platforms. |
| CISCO-PING-MIB IPNM ✓ | Manages ICMP ping test operations for IP reachability testing and round-trip time measurement on Cisco devices. |
| CISCO-PKI-MIB | Manages PKI certificate enrollment, trustpoints, and certificate lifecycle on Cisco security-enabled devices. |
| CISCO-PKI-PARTICIPATION-MIB | Manages PKI certificate enrollment and participation including certificate request and CA interaction on Cisco devices. |
| CISCO-PMON-MIB | Monitors performance counters for interfaces and services on Cisco optical and carrier Ethernet platforms. |
| CISCO-PNNI-CAPABILITY | Declares agent capabilities for PNNI (Private Network-to-Network Interface) ATM routing protocol management. |
| CISCO-PNNI-MIB | Manages Private Network-to-Network Interface (PNNI) ATM routing protocol configuration on Cisco ATM switches. |
| CISCO-POE-PD-MIB | Manages Power over Ethernet powered device (PD) power negotiation and consumption on Cisco PoE endpoints. |
| CISCO-POLICY-GROUP-CAPABILITY | Declares SNMP agent capabilities for policy group management on Cisco routing and switching platforms. |
| CISCO-POLICY-GROUP-MIB | Manages policy groups associating QoS and security policies with interface sets on Cisco network devices. |
| CISCO-POP-MGMT-CAPABILITY | Declares agent capabilities for Point-of-Presence (PoP) management features on Cisco service provider platforms. |
| CISCO-POP-MGMT-MIB IPNM ✓ | Manages Point of Presence (PoP) resources including access concentrators and subscriber sessions on Cisco platforms. |
| CISCO-PORT-CHANNEL-MIB IPNM ✓ | Provides managed objects for the management of port channel (link aggregation) ports on Cisco devices. |
| CISCO-PORT-QOS-CAPABILITY | Declares agent capabilities for per-port Quality of Service configuration and policy enforcement. |
| CISCO-PORT-QOS-MIB IPNM ✓ | Manages per-port QoS policy assignments and traffic classification on Cisco switching platforms. |
| CISCO-PORT-SECURITY-CAPABILITY | Declares SNMP agent capabilities for port security MAC address limiting on Cisco switching platforms. |
| CISCO-PORT-SECURITY-MIB IPNM ✓ | Manages port security configuration limiting MAC addresses and detecting violations on Cisco switch ports. |
| CISCO-PORT-STORM-CONTROL-CAPABILITY | Declares SNMP agent capabilities for port storm control traffic rate limiting on Cisco switching platforms. |
| CISCO-PORT-STORM-CONTROL-MIB | Manages storm control thresholds for broadcast, multicast, and unicast traffic on Cisco switch ports. |
| CISCO-PORT-TRACK-MIB | Manages port tracking to bring down dependent interfaces when tracked uplink ports fail on Cisco switches. |
| CISCO-POWER-ETHERNET-CAPABILITY | Declares agent capabilities for Power over Ethernet (PoE) management including port power delivery and budget control. |
| CISCO-POWER-ETHERNET-EXT-CAPABILITY | Declares SNMP agent capabilities for Power over Ethernet extensions on Cisco PoE switching platforms. |
| CISCO-POWER-ETHERNET-EXT-MIB | Extends PoE management with Cisco-specific power budget, class, and per-port allocation statistics. |
| CISCO-PPPOE-MIB | Manages PPPoE session establishment, authentication, and statistics on Cisco broadband access routers. |
| CISCO-PREFERRED-PATH-MIB | Manages preferred path routing policies directing traffic over specific WAN links on Cisco routers. |
| CISCO-PRINTER-CAPABILITY | Declares agent capabilities for printer management functions on Cisco devices supporting print services. |
| CISCO-PRIVATE-VLAN-CAPABILITY | Declares SNMP agent capabilities for Private VLAN (PVLAN) management on Cisco switching platforms. |
| CISCO-PRIVATE-VLAN-MIB | Manages Private VLAN community, isolated, and promiscuous port associations on Cisco switching platforms. |
| CISCO-PROCESS-CAPABILITY | Declares agent capabilities for process and CPU utilization monitoring on Cisco IOS and NX-OS platforms. |
| CISCO-PROCESS-MIB IPNM ✓ | Monitors CPU process utilization, memory consumption, and runtime statistics on Cisco routing platforms. |
| CISCO-PRODUCTS-MIB IPNM ✓ | Defines sysObjectID values assigned to Cisco hardware platforms, serving as the central registry for SNMP-based product identification. |
| CISCO-PRODUCTS-MIB-CORRECTIONS | Provides corrections to Cisco product OID assignments resolving conflicts in the Cisco enterprise product MIB. |
| CISCO-PROP-ATM-IF-MIB | Manages Cisco proprietary ATM interface attributes extending standard ATM interface management objects. |
| CISCO-PROXY-CONTROL-MIB | Manages proxy control configuration for media relay and application-layer gateway on Cisco voice platforms. |
| CISCO-PRP-MIB | Manages Parallel Redundancy Protocol (PRP, IEC 62439-3) dual-network redundancy on Cisco industrial switches. |
| CISCO-PSA-MICROCODE-MIB | Handles microcode version tracking and loading for Parallel Side-A processors on Cisco modular platforms. |
| CISCO-PSD-CLIENT-MIB | Manages Packet Stream Dispatcher client configuration and statistics on Cisco high-performance routing platforms. |
| CISCO-PSM-MIB | Manages Port Security Manager policies controlling port-level access based on MAC and IP addresses. |
| CISCO-PSM-MIB-CAPABILITY | Declares agent capabilities for Port Security Manager (PSM) controlling MAC address-based port access. |
| CISCO-PTOPO-EXTN-MIB | Extends physical topology discovery with Cisco-specific neighbor and connection data for network mapping. |
| CISCO-PTP-MIB | Manages IEEE 1588 Precision Time Protocol clock synchronization configuration and statistics on Cisco devices. |
| CISCO-Q-BRIDGE-CAPABILITY | Declares SNMP agent capabilities for IEEE 802.1Q bridge management on Cisco switching platforms. |
| CISCO-QINQ-VLAN-MIB | Manages Q-in-Q double VLAN tagging tunnel configuration and statistics on Cisco carrier Ethernet switches. |
| CISCO-QLLC01-MIB | Manages Qualified Logical Link Control (QLLC) SNA-over-X.25 protocol sessions on Cisco legacy WAN platforms. |
| CISCO-QOS-PIB-CAPABILITY | Declares agent capabilities for the QoS Policy Information Base (PIB) framework for policy-based QoS provisioning. |
| CISCO-QOS-PIB-MIB IPNM ✓ | Defines the Cisco QoS Policy Information Base (PIB) used to provision and manage Quality of Service policy. |
| CISCO-QOS-POLICY-CONFIG-CAPABILITY | Declares agent capabilities for QoS policy configuration management on Cisco devices. |
| CISCO-QOS-POLICY-CONFIG-MIB | Manages QoS policy configuration including class maps, policy maps, and service policy attachment on Cisco devices. |
| CISCO-QOS-TC-MIB | Defines textual conventions used across Cisco QoS MIBs for consistent data type representation in QoS management. |
| CISCO-QP-LBG-MIB | Manages QoS policy load balancing group configuration and traffic distribution on Cisco routing platforms. |
| CISCO-QUEUE-MIB | Monitors interface queue depths, drops, and scheduling statistics for traffic management on Cisco devices. |
| CISCO-RADIUS-ACC-CLIENT-CAPABILITY | Declares agent capabilities for RADIUS accounting client functionality on Cisco AAA-enabled platforms. |
| CISCO-RADIUS-AUTH-CLIENT-CAPABILITY | Declares agent capabilities for RADIUS authentication client functionality on Cisco AAA-enabled platforms. |
| CISCO-RADIUS-CAPABILITY | Declares SNMP agent capabilities for RADIUS authentication and accounting on Cisco network access devices. |
| CISCO-RADIUS-EXT-MIB | Extends RADIUS client management with Cisco-specific server groups, dead criteria, and statistics objects. |
| CISCO-RADIUS-MIB | Manages RADIUS protocol operation including server configuration, statistics, and authentication/accounting on Cisco devices. |
| CISCO-REMOTE-ACCESS-MONITOR-MIB IPNM ✓ | Tracks remote access VPN structures spanning Layer 2 (PPTP, L2TP, L2F), Layer 3 (IPSec), and Layer 4 (SSL) VPNs. |
| CISCO-REPEATER-MIB | Manages Ethernet repeater and hub port configuration and collision statistics on Cisco hub products. |
| CISCO-REPORT-INTERVAL-TC-MIB | Defines textual conventions for configuring performance report collection intervals in Cisco monitoring MIBs. |
| CISCO-RESILIENT-ETHERNET-PROTOCOL-MIB | Manages REP (Resilient Ethernet Protocol) ring segment topology and failure recovery on Cisco switches. |
| CISCO-RF-CAPABILITY | Declares SNMP agent capabilities for Redundancy Framework stateful switchover on Cisco routing platforms. |
| CISCO-RF-MIB IPNM ✓ | Provides configuration control and status for the Redundancy Framework (RF) subsystem, supporting 1:1 redundancy on processor cards. |
| CISCO-RF-SUPPLEMENTAL-MIB | Provides supplemental objects for Cisco Redundancy Framework stateful switchover and HA configuration. |
| CISCO-RFC1213-CAPABILITY | Declares Cisco SNMP agent capabilities for RFC 1213 MIB-II management on Cisco routing and switching platforms. |
| CISCO-RFC1406-CAPABILITY | Declares Cisco SNMP agent capabilities for RFC 1406 DS1 interface management on Cisco WAN platforms. |
| CISCO-RFC1407-CAPABILITY | Declares Cisco SNMP agent capabilities for RFC 1407 DS3 interface management on Cisco WAN platforms. |
| CISCO-RHINO-MIB | Manages the Cisco Rhino high-density voice gateway platform including DS0 channel and call statistics. |
| CISCO-RMON-CAPABILITY | Declares SNMP agent capabilities for RMON remote monitoring on Cisco routing and switching platforms. |
| CISCO-RMON-CONFIG-CAPABILITY | Declares SNMP agent capabilities for RMON configuration management on Cisco routing and switching platforms. |
| CISCO-RMON-CONFIG-MIB | Manages RMON monitoring configuration including data collection filters and alarm thresholds on Cisco devices. |
| CISCO-RMON2-CAPABILITY | Declares SNMP agent capabilities for RMON2 application-layer traffic monitoring on Cisco network platforms. |
| CISCO-ROUTE-POLICIES-MIB | Manages route policy definitions and their application to routing protocol updates on Cisco routing platforms. |
| CISCO-RPMS-MIB | Manages Resource Policy Management System (RPMS) bandwidth and QoS policy allocation on Cisco platforms. |
| CISCO-RS-232-CAPABILITY | Declares SNMP agent capabilities for RS-232 serial interface management on Cisco routing platforms. |
| CISCO-RSCN-MIB | Manages Registered State Change Notification (RSCN) fabric events and subscriptions on Cisco MDS SAN switches. |
| CISCO-RSRB-MIB | Manages Remote Source Route Bridging (RSRB) for SNA traffic transport over IP on Cisco routers. |
| CISCO-RSVP-CAPABILITY | Declares SNMP agent capabilities for RSVP resource reservation protocol management on Cisco routing platforms. |
| CISCO-RTP-METRICS-MIB | Monitors RTP media stream quality metrics including packet loss, jitter, and MOS on Cisco voice platforms. |
| CISCO-RTTMON-CAPABILITY | Declares SNMP agent capabilities for IP SLA/RTT Monitor operations on Cisco routing and switching platforms. |
| CISCO-RTTMON-ICMP-MIB | Manages ICMP-based IP SLA round-trip time monitoring operations and results on Cisco network devices. |
| CISCO-RTTMON-IP-EXT-MIB | Extends IP SLA monitoring with additional IP-layer test types and extended statistics on Cisco devices. |
| CISCO-RTTMON-MIB IPNM ✓ | Monitors network performance by managing round-trip time (RTT) probes for operations such as ICMP echo, HTTP, FTP, and jitter measurements. |
| CISCO-RTTMON-RTP-MIB | Manages RTP-based IP SLA operations measuring voice path quality metrics on Cisco routing platforms. |
| CISCO-RTTMON-TC-MIB | Defines textual conventions for Cisco IP SLA (formerly RTT Monitor) operations, providing data types for round-trip time measurement, probe types, and response codes. |
| CISCO-SAA-APM-MIB | Manages Service Assurance Agent Application Performance Monitor probes and results on Cisco network devices. |
| CISCO-SAN-BASE-SVC-MIB | Manages SAN base infrastructure services including fabric login and zone distribution on Cisco MDS switches. |
| CISCO-SANTAP-MIB | Manages SAN Tap service intercept configurations for storage traffic monitoring on Cisco MDS SAN switches. |
| CISCO-SCAS-BB-MIB | Manages subscriber and content awareness broadband policy enforcement statistics on Cisco CSG platforms. |
| CISCO-SCSI-FLOW-MIB | Monitors SCSI I/O flow statistics including initiator/target traffic counters on Cisco MDS SAN platforms. |
| CISCO-SCSI-MIB | Monitors SCSI protocol operations and statistics on Cisco MDS SAN switches for storage area network management. |
| CISCO-SCTP-CAPABILITY | Declares agent capability statements for the SCTP (Stream Control Transmission Protocol) MIB on Cisco devices. |
| CISCO-SCTP-MIB | Manages and monitors SCTP associations, endpoints, and protocol statistics on Cisco devices. |
| CISCO-SDG-MDNS-MIB | Monitors Cisco Service Discovery Gateway multicast DNS (mDNS) service advertisement and querying for IoT environments. |
| CISCO-SDLLC-MIB | Manages SDLLC conversion bridging between Synchronous Data Link Control and IEEE 802.2 LLC for SNA-over-LAN networks. |
| CISCO-SDSL-LINE-MIB | Manages and monitors Symmetric DSL (SDSL) line configuration, status, and performance statistics on Cisco DSL equipment. |
| CISCO-SDWAN-APP-ROUTE-MIB | Monitors Cisco SD-WAN application-aware routing statistics and path quality metrics across WAN overlay tunnels. |
| CISCO-SDWAN-BFD-MIB | Monitors Bidirectional Forwarding Detection (BFD) sessions and liveliness probes in the Cisco SD-WAN overlay fabric. |
| CISCO-SDWAN-OMP-MIB | Monitors Cisco SD-WAN OMP (Overlay Management Protocol) route advertisements and peer session state. |
| CISCO-SDWAN-OPER-APP-MIB | Provides operational statistics for applications detected by Cisco SD-WAN DPI on vEdge/vManage platforms. |
| CISCO-SDWAN-OPER-SYSTEM-MIB | Provides operational system-level statistics and health metrics for Cisco SD-WAN vEdge and vManage nodes. |
| CISCO-SDWAN-POLICY-MIB | Manages and monitors Cisco SD-WAN centralized and localized policies applied to WAN overlay traffic flows. |
| CISCO-SDWAN-PROBE-MIB | Monitors active probe results and path quality measurements in the Cisco SD-WAN WAN overlay network. |
| CISCO-SDWAN-SECURITY-MIB | Monitors security policy enforcement and threat detection statistics on Cisco SD-WAN edge devices. |
| CISCO-SECURE-SHELL-CAPABILITY | Declares agent capability statements for Cisco Secure Shell (SSH) protocol management MIB implementations. |
| CISCO-SECURE-SHELL-MIB | Manages SSH (Secure Shell) sessions, version negotiation, cipher configuration, and connection statistics on Cisco devices. |
| CISCO-SECY-EXT-MIB | Extends IEEE 802.1AE MACsec management for Cisco-specific MAC Security encryption and key agreement parameters. |
| CISCO-SELECTIVE-VRF-DOWNLOAD-MIB | Manages selective VRF route downloading to line cards to reduce memory consumption in large MPLS VPN deployments. |
| CISCO-SERVICE-CONTROL-ATTACK-MIB | Monitors attack detection and mitigation statistics on Cisco SCE (Service Control Engine) deep packet inspection platforms. |
| CISCO-SERVICE-CONTROL-LINK-MIB | Monitors subscriber link status and traffic statistics on Cisco SCE Service Control Engine platforms. |
| CISCO-SERVICE-CONTROL-RDR-MIB | Manages the Raw Data Record (RDR) reporting channel on Cisco SCE platforms for subscriber usage data export. |
| CISCO-SERVICE-CONTROL-SUBSCRIBERS-MIB | Monitors subscriber session counts, states, and quota usage on Cisco SCE deep packet inspection platforms. |
| CISCO-SERVICE-CONTROL-TP-STATS-MIB | Monitors transaction processor traffic statistics and flow counters on Cisco SCE Service Control Engine devices. |
| CISCO-SERVICE-CONTROLLER-MIB | Manages service controller orchestration and service chaining configuration on Cisco network service platforms. |
| CISCO-SESS-BORDER-CTRLR-CALL-STATS-MIB | Monitors call admission, active call counts, and per-call statistics on Cisco Session Border Controller devices. |
| CISCO-SESS-BORDER-CTRLR-EVENT-MIB | Manages event notifications and alarm reporting for Cisco Session Border Controller operational state changes. |
| CISCO-SESS-BORDER-CTRLR-STATS-MIB | Monitors aggregate SIP/H.323 signaling statistics and media stream metrics on Cisco Session Border Controllers. |
| CISCO-SEU-MITIGATION-MIB | Monitors Single Event Upset (SEU) hardware error detection and mitigation due to cosmic ray radiation on Cisco platforms. |
| CISCO-SIBU-FLASH-MIB | Manages flash memory storage and firmware image inventory on Cisco SIBU SMB switches such as Catalyst 1900. |
| CISCO-SIBU-MANAGERS-MIB | Manages network management access, community strings, and manager lists on Cisco SIBU small and medium business switches. |
| CISCO-SIP-CALLS-MIB | Monitors active and historical SIP call legs, media streams, and call quality statistics on Cisco SIP gateways. |
| CISCO-SIP-UA-CAPABILITY | Declares agent capability statements for the Cisco SIP User Agent MIB across various IOS and platform releases. |
| CISCO-SIP-UA-MIB | Manages SIP user agent configuration, dial peers, and protocol statistics on Cisco voice gateways and CUCM. |
| CISCO-SLB-CAPABILITY | Declares agent capability statements for Cisco Server Load Balancing (SLB) MIB implementations on Catalyst/CSM. |
| CISCO-SLB-DFP-MIB | Manages Dynamic Feedback Protocol (DFP) server weight reporting for Cisco Server Load Balancing on CSM modules. |
| CISCO-SLB-EXT-CAPABILITY | Declares agent capability statements for Cisco SLB extended MIB features on Catalyst 6500 CSM and LocalDirector. |
| CISCO-SLB-EXT-MIB | Extends Cisco Server Load Balancing management with virtual server policies, sticky sessions, and health probe configuration. |
| CISCO-SLB-HEALTH-MON-CAPABILITY | Declares agent capability statements for Cisco SLB health monitoring features on load balancing modules. |
| CISCO-SLB-HEALTH-MON-MIB | Manages health monitoring probes and real server availability tracking for Cisco Server Load Balancing platforms. |
| CISCO-SLB-MIB IPNM ✓ | Manages server load balancing (SLB) on Cisco devices, including virtual server configuration and Dynamic Feedback Protocol (DFP) for obtaining server health information. |
| CISCO-SM-FILE-DOWNLOAD-MIB | Manages file download operations to service modules within Cisco chassis-based systems. |
| CISCO-SMART-INSTALL-MIB | Manages Cisco Smart Install zero-touch provisioning, image upgrade, and configuration deployment for switches. |
| CISCO-SMART-LIC-MIB | Monitors Cisco Smart Licensing registration, entitlement counts, and license compliance status on Cisco devices. |
| CISCO-SME-MIB | Manages Cisco Storage Media Encryption (SME) key management and encryption policy for SAN data-at-rest protection on MDS. |
| CISCO-SMI IPNM ✓ | Defines the top-level Structure of Management Information (SMI) for Cisco enterprise MIBs, providing the root OID hierarchy from which other Cisco MIBs branch. |
| CISCO-SMON-CAPABILITY | Declares agent capability statements for SMON (Switch Monitoring RMON extension) MIB on Cisco switch platforms. |
| CISCO-SNA-LLC-MIB | Manages IEEE 802.2 Logical Link Control (LLC) parameters and statistics for SNA traffic on Cisco routers. |
| CISCO-SNAPSHOT-MIB | Manages Snapshot routing configuration for on-demand DDR connections that activate routing updates only when dialing. |
| CISCO-SNMP-COMMUNITY-CAPABILITY | Declares agent capability statements for SNMP community string management MIB on Cisco IOS and NX-OS platforms. |
| CISCO-SNMP-FRAMEWORK-CAPABILITY | Declares agent capability statements for SNMPv3 framework architecture components on Cisco device platforms. |
| CISCO-SNMP-HANDSHAKE-MIB | Provides SNMP connectivity verification via handshake objects to confirm SNMP reachability to Cisco devices. |
| CISCO-SNMP-MPD-CAPABILITY | Declares agent capability statements for SNMP Message Processing and Dispatching (MPD) subsystem on Cisco devices. |
| CISCO-SNMP-NOTIFICATION-CAPABILITY | Declares agent capability statements for SNMP notification (trap/inform) management MIB on Cisco platforms. |
| CISCO-SNMP-NOTIFICATION-EXT-MIB | Extends SNMP notification management with Cisco-specific trap throttling, filtering, and destination controls. |
| CISCO-SNMP-TARGET-CAPABILITY | Declares agent capability statements for SNMP target (trap destination) address management MIB on Cisco devices. |
| CISCO-SNMP-TARGET-EXT-MIB | Extends SNMP target management with Cisco-specific VRF binding and source interface for trap destinations. |
| CISCO-SNMP-USM-CAPABILITY | Declares agent capability statements for SNMP User-based Security Model (USM) management MIB on Cisco devices. |
| CISCO-SNMP-USM-OIDS-MIB | Defines Cisco-specific OID assignments for SNMP USM authentication and privacy protocol algorithm identifiers. |
| CISCO-SNMP-VACM-CAPABILITY | Declares agent capability statements for SNMP View-based Access Control Model (VACM) MIB on Cisco platforms. |
| CISCO-SNMP-VACM-EXT-MIB | Extends SNMP VACM with Cisco-specific access control enhancements for fine-grained view-based security policies. |
| CISCO-SNMPv2-CAPABILITY | Declares agent capability statements for the SNMPv2 protocol management MIB implementation on Cisco platforms. |
| CISCO-SONET-CAPABILITY | Declares agent capability statements for SONET/SDH interface management MIB on Cisco optical transport platforms. |
| CISCO-SONET-EXT-CAPABILITY | Declares agent capability statements for Cisco extended SONET MIB features on optical interface modules. |
| CISCO-SONET-MIB | Provides comprehensive SONET/SDH interface management including path, section, and line layer performance monitoring. |
| CISCO-SP-CAPABILITY | Declares agent capabilities for Cisco service policy management on supported platforms. |
| CISCO-SP-MIB | Manages service policy attachment and statistics for traffic classification and conditioning on Cisco interfaces. |
| CISCO-SRP-CAPABILITY | Declares agent capabilities for Spatial Reuse Protocol (SRP) used in Cisco DPT/RPR ring topology management. |
| CISCO-SRP-MIB | Manages Spatial Reuse Protocol (SRP/DPT) ring interfaces and topology discovery on Cisco dynamic packet transport rings. |
| CISCO-SRST-MIB | Monitors Cisco Survivable Remote Site Telephony (SRST) fallback mode activation and registered phone counts. |
| CISCO-SSG-CAPABILITY | Declares agent capabilities for the Service Selection Gateway (SSG) subscriber policy engine for ISP environments. |
| CISCO-SSG-MIB | Manages the Service Selection Gateway (SSG) providing per-subscriber policy and service selection for ISP deployments. |
| CISCO-SSL-PROXY-CAPABILITY | Declares agent capabilities for SSL proxy and offload functionality on Cisco security and load-balancing platforms. |
| CISCO-SSL-PROXY-MIB | Manages SSL proxy and offload sessions including certificate handling and connection statistics on Cisco devices. |
| CISCO-SSLVPN-MIB | Manages Cisco SSL VPN (clientless and AnyConnect) gateway sessions, user authentication, and tunnel statistics. |
| CISCO-SSM-PROV-MIB | Manages Security Services Module (SSM) provisioning including policy and feature configuration for Cisco security appliances. |
| CISCO-ST-TC IPNM ✓ | Defines textual conventions used in Storage Area Network (SAN) technology-specific MIBs. |
| CISCO-STACK-CAPABILITY | Declares agent capabilities for switch stacking management on Cisco Catalyst and similar stackable switch platforms. |
| CISCO-STACK-MIB IPNM ✓ | Provides configuration and runtime status information for chassis, modules, and ports on Cisco Catalyst switch platforms. |
| CISCO-STACKMAKER-MIB | Manages Cisco StackMaker proprietary stacking protocol providing configuration and status for stacked switch clusters. |
| CISCO-STACKWISE-MIB | Manages Cisco StackWise switch stacking technology including stack topology, port roles, and member switch status. |
| CISCO-STP-EXTENSIONS-CAPABILITY | Declares agent capability statements for Cisco STP Extensions MIB features including PVST+ and PortFast across platforms. |
| CISCO-STP-EXTENSIONS-MIB IPNM ✓ | Manages Cisco Spanning Tree Protocol extensions including PVST+, PortFast, UplinkFast, and BackboneFast features. |
| CISCO-STUN-MIB | Manages Serial Tunnel (STUN) encapsulation for transporting SNA and BISYNC traffic over IP networks. |
| CISCO-SUBSCRIBER-IDENTITY-TC-MIB | Defines textual conventions for subscriber identity attributes used in Cisco ISG subscriber management MIBs. |
| CISCO-SUBSCRIBER-SESSION-MIB | Manages ISG subscriber session lifecycle, service activation, and per-subscriber policy enforcement on Cisco IOS. |
| CISCO-SUBSCRIBER-SESSION-TC-MIB | Establishes textual conventions for subscriber session types, states, and identities referenced by Cisco ISG subscriber MIBs. |
| CISCO-SVC-INTERFACE-MIB | Manages supervisor virtual circuit (SVC) interfaces providing configuration and status for internal switch fabric connections. |
| CISCO-SVI-AUTOSTATE-CAPABILITY | Declares agent capabilities for SVI (Switched Virtual Interface) autostate tracking feature management. |
| CISCO-SVI-AUTOSTATE-MIB | Manages SVI autostate tracking which controls the up/down state of Layer 3 SVIs based on member port availability. |
| CISCO-SWITCH-CEF-CAPABILITY | Declares agent capabilities for Cisco Express Forwarding (CEF) on Catalyst switch platforms. |
| CISCO-SWITCH-CEF-MIB | Manages CEF (Cisco Express Forwarding) on switch ASICs including FIB and adjacency table statistics. |
| CISCO-SWITCH-CGMP-MIB | Manages Cisco Group Management Protocol (CGMP) for hardware-accelerated multicast snooping on Cisco LAN switches. |
| CISCO-SWITCH-ENGINE-CAPABILITY | Declares agent capabilities for switch engine ASIC management on Cisco Catalyst hardware platforms. |
| CISCO-SWITCH-ENGINE-MIB | Monitors Cisco switch engine fabric utilization, forwarding rates, and switching ASIC statistics. |
| CISCO-SWITCH-FABRIC-CAPABILITY | Declares agent capabilities for switch fabric management including crossbar and backplane configuration. |
| CISCO-SWITCH-FABRIC-MIB | Manages switch fabric components including crossbar switching, backplane utilization, and fabric health monitoring. |
| CISCO-SWITCH-HARDWARE-CAPACITY-CAPABILITY | Declares agent capabilities for monitoring switch hardware resource capacity including TCAM and table utilization. |
| CISCO-SWITCH-HARDWARE-CAPACITY-MIB | Monitors switch hardware resource capacity including TCAM entries, MAC tables, and ASIC resource utilization. |
| CISCO-SWITCH-MULTICAST-CAPABILITY | Declares agent capabilities for multicast forwarding management on Cisco Catalyst switch platforms. |
| CISCO-SWITCH-MULTICAST-MIB | Manages multicast forwarding on switch ASICs including IGMP snooping entries and multicast routing hardware statistics. |
| CISCO-SWITCH-NETFLOW-CAPABILITY | Declares agent capabilities for NetFlow hardware flow export functionality on Cisco Catalyst switches. |
| CISCO-SWITCH-NETFLOW-MIB | Manages NetFlow flow collection and export on Cisco Catalyst switch ASICs for traffic visibility and accounting. |
| CISCO-SWITCH-QOS-CAPABILITY | Declares agent capabilities for QoS policy enforcement on Cisco Catalyst switch hardware platforms. |
| CISCO-SWITCH-QOS-MIB | Manages QoS queuing, scheduling, and marking configuration on Cisco Catalyst switch ASICs and ports. |
| CISCO-SWITCH-RATE-LIMITER-CAPABILITY | Declares agent capabilities for hardware rate limiter and policer management on Cisco Catalyst switch platforms. |
| CISCO-SWITCH-RATE-LIMITER-MIB | Manages hardware rate limiters and policers on Cisco Catalyst switches for control-plane and data-plane traffic protection. |
| CISCO-SWITCH-STATS-CAPABILITY | Declares agent capabilities for switch port and ASIC statistics collection on Cisco Catalyst platforms. |
| CISCO-SWITCH-STATS-MIB | Supplies detailed port- and ASIC-level traffic statistics, including error and throughput counters, for Cisco Catalyst switches. |
| CISCO-SWITCH-USAGE-MIB | Monitors aggregate switch utilization metrics including bandwidth consumption and port usage on Cisco switches. |
| CISCO-SYS-INFO-LOG-CAPABILITY | Declares agent capabilities for system information logging management on Cisco devices. |
| CISCO-SYS-INFO-LOG-MIB | Manages system information logging configuration and retrieval for diagnostic and audit data on Cisco devices. |
| CISCO-SYSAPPL-CAPABILITY | Declares agent capabilities for the SYSAPPL-MIB covering installed application and process inventory on Cisco platforms. |
| CISCO-SYSLOG-CAPABILITY | Declares agent capability statements for Cisco syslog message management MIB on IOS and NX-OS platforms. |
| CISCO-SYSLOG-EVENT-EXT-MIB | Extends syslog event management with Cisco-specific attributes for enhanced log filtering and event correlation. |
| CISCO-SYSLOG-EXT-CAPABILITY | Declares agent capabilities for Cisco syslog extensions providing enhanced message logging and filtering features. |
| CISCO-SYSLOG-EXT-MIB IPNM ✓ | Extends Cisco syslog management with enhanced filtering, rate limiting, and remote server configuration options. |
| CISCO-SYSLOG-MIB IPNM ✓ | Covers syslog message history, severity-based filtering, and remote syslog server destinations on Cisco devices. |
| CISCO-SYSTEM-CAPABILITY | Declares agent capability statements for Cisco system-level management MIB across IOS and NX-OS platform releases. |
| CISCO-SYSTEM-EXT-CAPABILITY | Declares agent capabilities for Cisco system extension features including chassis, memory, and boot information. |
| CISCO-SYSTEM-EXT-MIB | Extends system management with Cisco-specific hostname, NTP synchronization, reboot reason, and resource threshold objects. |
| CISCO-SYSTEM-MIB IPNM ✓ | Provides Cisco-defined extensions to the standard SNMP systemGroup, adding system-level management information for Cisco devices. |
| CISCO-TAP-MIB | Manages CALEA lawful intercept tap streams, target identification, and mediation device interfaces on Cisco routers. |
| CISCO-TAP2-CAPABILITY | Declares agent capabilities for CALEA lawful intercept version 2 tap management on Cisco platforms. |
| CISCO-TAP2-MIB | Manages next-generation CALEA lawful intercept streams supporting multiple transport types on Cisco IOS platforms. |
| CISCO-TBRIDGE-DEV-IF-MIB | Manages transparent bridge device interfaces providing per-interface bridging statistics and configuration. |
| CISCO-TC IPNM ✓ | Defines common textual conventions used across multiple Cisco enterprise MIBs. |
| CISCO-TC-NO-U32 | Defines Cisco textual conventions that exclude unsigned 32-bit integer types for compatibility with platforms lacking U32 support. |
| CISCO-TCP-CAPABILITY | Declares agent capability statements for TCP connection and statistics management MIB on Cisco device platforms. |
| CISCO-TCP-METRICS-MIB | Monitors TCP connection performance metrics including RTT, congestion window, and retransmission statistics on Cisco devices. |
| CISCO-TCP-MIB IPNM ✓ | Extends TCP connection management with Cisco-specific connection states, timer values, and performance counters. |
| CISCO-TCP-STD-CAPABILITY | Declares agent capabilities for the standard TCP MIB (RFC 4022) implementation on Cisco IOS and NX-OS platforms. |
| CISCO-TCPOFFLOAD-MIB | Manages TCP offload engine configuration and statistics for hardware-accelerated TCP processing on Cisco devices. |
| CISCO-TELEPRESENCE-CALL-CAPABILITY | Declares agent capability statements for Cisco TelePresence call management MIB on TelePresence system platforms. |
| CISCO-TELEPRESENCE-CALL-MIB | Monitors active and historical TelePresence video call sessions, media quality, and codec statistics on Cisco endpoints. |
| CISCO-TELEPRESENCE-CAPABILITY | Declares agent capabilities for Cisco TelePresence video conferencing system management. |
| CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-CAPABILITY | Declares agent capabilities for Cisco TelePresence Exchange conference bridge and scheduling management. |
| CISCO-TELEPRESENCE-EXCHANGE-SYSTEM-MIB | Manages Cisco TelePresence Exchange system providing conference scheduling, bridge resources, and call statistics. |
| CISCO-TELEPRESENCE-MIB | Provides general management for Cisco TelePresence endpoints including call status, codec, and peripheral monitoring. |
| CISCO-TELNET-SERVER-MIB | Manages Cisco Telnet server sessions including active connections, authentication state, and session configuration. |
| CISCO-TEMPERATURE-MIB | Monitors device temperature sensors providing current readings, thresholds, and thermal alarm status on Cisco hardware. |
| CISCO-THREAT-MITIGATION-SERVICE-CAPABILITY | States agent capabilities for managing DDoS detection and mitigation through the Cisco Threat Mitigation Service (TMS). |
| CISCO-THREAT-MITIGATION-SERVICE-MIB | Manages Cisco Threat Mitigation Service providing DDoS attack detection, rate limiting, and mitigation policy control. |
| CISCO-TM | Manages traffic matrix data collection for traffic engineering providing aggregate flow demand measurements across the network. |
| CISCO-TN3270SERVER-MIB | Manages TN3270 server functionality enabling TCP/IP-connected terminals to access IBM mainframe applications. |
| CISCO-TPC-MIB | Manages third-party copy (TPC) operations for storage or transmit power control functions on Cisco devices. |
| CISCO-TRANSACTION-CONNECTION-MIB | Manages transaction connection parameters for voice and data transaction processing on Cisco gateway platforms. |
| CISCO-TRUSTSEC-CAPABILITY | Declares agent capabilities for Cisco TrustSec general security group tagging and policy enforcement. |
| CISCO-TRUSTSEC-INTERFACE-CAPABILITY | Declares agent capabilities for TrustSec per-interface security group tagging and encryption configuration. |
| CISCO-TRUSTSEC-INTERFACE-MIB | Manages Cisco TrustSec Security Group Tag (SGT) assignments and enforcement on network interfaces. |
| CISCO-TRUSTSEC-MIB | Manages Cisco TrustSec security including Security Group Tags (SGT), SGACL enforcement, and PAC provisioning. |
| CISCO-TRUSTSEC-POLICY-CAPABILITY | Declares agent capabilities for TrustSec security group policy enforcement and SGACL management. |
| CISCO-TRUSTSEC-POLICY-MIB | Manages Cisco TrustSec SGACL policy download, binding, and enforcement for security group-based access control. |
| CISCO-TRUSTSEC-SERVER-CAPABILITY | Declares agent capabilities for TrustSec server (ISE/ACS) communication and credential management. |
| CISCO-TRUSTSEC-SERVER-MIB | Manages TrustSec AAA server connections for SGT policy download and device authentication via ISE or ACS. |
| CISCO-TRUSTSEC-SXP-CAPABILITY | Declares agent capabilities for TrustSec SXP (SGT Exchange Protocol) peer and binding management. |
| CISCO-TRUSTSEC-SXP-MIB | Monitors Cisco TrustSec SXP (SGT Exchange Protocol) peer connections and IP-to-SGT binding propagation. |
| CISCO-TRUSTSEC-TC-MIB | Defines textual conventions for Cisco TrustSec MIBs including Security Group Tag and policy data types. |
| CISCO-TS-STACK-MIB | Manages Terminal Server stack configuration providing port grouping and session management for async terminal servers. |
| CISCO-UBE-MIB | Manages Cisco Unified Border Element (UBE) session border controller including SIP/H.323 trunk and session statistics. |
| CISCO-UDLDP-CAPABILITY | Declares agent capabilities for Unidirectional Link Detection Protocol (UDLD) management on Cisco platforms. |
| CISCO-UDLDP-MIB | Manages UDLD (Unidirectional Link Detection Protocol) for detecting and disabling unidirectional Ethernet links. |
| CISCO-UDP-STD-CAPABILITY | Declares agent capabilities for the standard UDP MIB (RFC 4113) implementation on Cisco IOS and NX-OS platforms. |
| CISCO-UNIFIED-COMPUTING-ADAPTOR-MIB | Manages Cisco UCS virtual network adaptor (VIC) configuration, vNIC/vHBA inventory, and firmware on UCS servers. |
| CISCO-UNIFIED-COMPUTING-CONTROLLER-MIB | Manages Cisco UCS Manager controller providing fabric interconnect configuration, policy, and operational state monitoring. |
| CISCO-UNIFIED-COMPUTING-DHCP-MIB | Manages DHCP server and relay configuration within Cisco Unified Computing System (UCS) service profiles. |
| CISCO-UNIFIED-COMPUTING-EQUIPMENT-MIB | Monitors Cisco UCS equipment inventory including chassis, blade servers, fabric interconnects, and FEX modules. |
| CISCO-UNIFIED-COMPUTING-LLDP-MIB | Manages LLDP (Link Layer Discovery Protocol) neighbor discovery and port advertisement within Cisco UCS infrastructure. |
| CISCO-UNIFIED-COMPUTING-MAPPINGS-MIB | Cross-references UCS managed objects with their corresponding SNMP OID representations via object identity mappings. |
| CISCO-UNIFIED-COMPUTING-MIB | Provides top-level management for Cisco Unified Computing System (UCS) including blade servers, fabric, and service profiles. |
| CISCO-UNIFIED-COMPUTING-PROC-MIB | Monitors Cisco UCS server processor inventory, core counts, speed, and operational status within UCS domains. |
| CISCO-UNIFIED-COMPUTING-QUERYRESULT-MIB | Manages query result structures for retrieving UCS managed object data via SNMP from Cisco UCS Manager. |
| CISCO-UNIFIED-COMPUTING-VERSION-MIB | Provides version information for Cisco UCS Manager software components and firmware across UCS infrastructure. |
| CISCO-UNIFIED-FIREWALL-MIB | Manages Cisco unified firewall providing session statistics, connection counts, and policy enforcement metrics. |
| CISCO-UNITY-EXPRESS-MIB | Manages Cisco Unity Express embedded voicemail module including mailbox, subscriber, and message store configuration. |
| CISCO-UNITY-MIB | Monitors Cisco Unity voicemail and unified messaging system performance, mailbox counts, and call handler statistics. |
| CISCO-USER-CONNECTION-TAP-MIB | Manages lawful intercept taps for user connections enabling court-ordered monitoring of network sessions. |
| CISCO-USP-MIB | Manages Unified Survivable Remote Site Telephony (SRST) Platform or Universal Service Plane providing call processing failover. |
| CISCO-VDC-CAPABILITY | Declares agent capability statements for Cisco Virtual Device Context (VDC) management MIB on Nexus platforms. |
| CISCO-VDC-MIB | Manages Virtual Device Context (VDC) creation, resource allocation, and operational state on Cisco Nexus switches. |
| CISCO-VIDEO-SESSION-CAPABILITY | Declares agent capabilities for video session management including codec, bandwidth, and call statistics on Cisco platforms. |
| CISCO-VIDEO-SESSION-MIB | Monitors active video surveillance and streaming sessions, stream quality, and endpoint registration on Cisco platforms. |
| CISCO-VIDEO-TC | Defines textual conventions for Cisco video management MIBs including codec types, resolution, and session state data types. |
| CISCO-VIM-MIB | Manages VLAN Interface Manager (VIM) providing VLAN-to-interface bindings and SVI lifecycle control on Cisco switches. |
| CISCO-VINES-MIB | Manages Banyan VINES network protocol routing and forwarding configuration on Cisco routers for legacy VINES networks. |
| CISCO-VIRTUAL-INTERFACE-MIB | Manages virtual interface creation, binding, and operational state for logical network interfaces on Cisco devices. |
| CISCO-VIRTUAL-NIC-MIB | Manages virtual NIC (vNIC) provisioning, bandwidth allocation, and statistics for virtualized Cisco server adapters. |
| CISCO-VIRTUAL-NW-IF-MIB | Manages virtual network interface configuration and statistics for overlay and virtualized network environments on Cisco. |
| CISCO-VIRTUAL-SWITCH-CAPABILITY | Declares agent capability statements for Cisco Virtual Switching System (VSS) management MIB on Catalyst platforms. |
| CISCO-VIRTUAL-SWITCH-MIB | Manages Cisco Virtual Switching System (VSS) domain, switch member roles, and virtual switch link (VSL) status. |
| CISCO-VISION-MIB | Monitors Cisco Vision digital signage platform content delivery, display endpoint status, and media playback health. |
| CISCO-VISM-ATM-TRUNK-MIB | Manages ATM trunk connections carrying TDM voice traffic on Cisco VISM Voice Interworking Service Module for MGX. |
| CISCO-VISM-CAC-MIB | Manages Connection Admission Control (CAC) policies and bearer channel capacity on Cisco VISM ATM voice gateway. |
| CISCO-VISM-CAS-MIB | Manages Channel Associated Signaling (CAS) configuration for TDM voice trunks on Cisco VISM gateway modules. |
| CISCO-VISM-CODEC-MIB | Manages voice codec selection, packetization, and compression configuration on Cisco VISM ATM voice gateway modules. |
| CISCO-VISM-CONN-CAPABILITY | Declares agent capability statements for Cisco VISM connection management MIB on MGX VISM module releases. |
| CISCO-VISM-CONN-MIB | Manages ATM connection (PVC/SVC) provisioning and status for voice bearer channels on Cisco VISM MGX modules. |
| CISCO-VISM-CONN-STAT-MIB | Monitors ATM connection statistics including cell counts and error rates for voice trunks on Cisco VISM modules. |
| CISCO-VISM-DSX0-MIB | Manages DS0 channel configuration, signaling, and status for individual time slots on Cisco VISM T1/E1 interfaces. |
| CISCO-VISM-DSX1-CAPABILITY | States agent capability information for the MIB managing Cisco VISM DSX1 (T1/E1) interfaces on MGX platforms. |
| CISCO-VISM-DSX1-MIB | Manages T1/E1 (DSX1) interface configuration, framing, line coding, and performance for Cisco VISM gateway modules. |
| CISCO-VISM-HDLC-MIB | Manages HDLC channel configuration and statistics for data backhaul on Cisco VISM Voice Interworking Service Modules. |
| CISCO-VISM-MODULE-CAPABILITY | Declares agent capability statements for Cisco VISM module-level management MIB across MGX platform releases. |
| CISCO-VISM-MODULE-MIB | Manages Cisco VISM module initialization, firmware versions, and system-level configuration on MGX platforms. |
| CISCO-VISM-PORT-MIB | Manages physical and logical port configuration and status on Cisco VISM Voice Interworking Service Modules. |
| CISCO-VISM-RSRC-PART-MIB | Manages resource partition allocation for bearer channels and connections on Cisco VISM MGX gateway modules. |
| CISCO-VISM-SESSION-CAPABILITY | Declares agent capability statements for Cisco VISM media gateway session management MIB on MGX platforms. |
| CISCO-VISM-SESSION-MIB | Manages MGCP/H.248 media gateway session configuration and call state on Cisco VISM ATM voice gateway modules. |
| CISCO-VISM-SVC-MIB | Manages ATM Switched Virtual Circuit (SVC) configuration and signaling on Cisco VISM voice gateway modules. |
| CISCO-VISM-TRAPS-MIB | Defines trap notifications for fault conditions, state changes, and threshold crossings on Cisco VISM MGX modules. |
| CISCO-VISM-XGCP-EXT | Extends xGCP (MGCP/H.248) media gateway control protocol parameters on Cisco VISM ATM voice gateway modules. |
| CISCO-VLAN-BRIDGING-CAPABILITY | Declares agent capability statements for Cisco VLAN-aware bridging MIB on Catalyst and NX-OS switch platforms. |
| CISCO-VLAN-BRIDGING-MIB | Manages VLAN-aware transparent bridging, MAC address tables, and per-VLAN spanning tree on Cisco switches. |
| CISCO-VLAN-GROUP-CAPABILITY | Declares agent capability statements for Cisco VLAN group management MIB on Catalyst switch platforms. |
| CISCO-VLAN-IFTABLE-RELATIONSHIP-MIB IPNM ✓ | Maps VLAN group IDs to interface index (ifIndex) values for routed VLAN interfaces. |
| CISCO-VLAN-MEMBERSHIP-MIB IPNM ✓ | Manages VLAN membership assignments for non-trunk bridge ports and provides information about VLAN Membership Policy Servers (VMPS). |
| CISCO-VOICE-DNIS-MIB IPNM ✓ | Manages Dialed Number Information Service (DNIS) mappings, associating DNIS entries with Voice XML pages for audio playback features. |
| CISCO-VTP-MIB IPNM ✓ | Manages the VLAN Trunking Protocol (VTP) and VLAN configuration on Cisco switches. |
| CISCOTRAP-MIB | Defines generic Cisco enterprise SNMP traps for common network events and fault notifications. |
| CISCOWAN-SMI | Defines the Cisco WAN Structure of Management Information OID hierarchy for WAN product MIBs. |
| CME-MIB | Manages Cisco Communications Manager Express (CME) telephony service and IP phone configuration. |