CISCO-RTTMON-ICMP-MIB

All MIBs › CISCO-RTTMON-ICMP-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2005-08-09

Category: Cisco Devices, IP and Core Protocols, Network Monitoring (RMON)

Description: Manages ICMP-based IP SLA round-trip time monitoring operations and results on Cisco network devices.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-RTTMON-ICMP-MIB?

CISCO-RTTMON-ICMP-MIB is a Cisco Systems proprietary MIB extending CISCO-RTTMON-MIB (IP SLA/RTT Monitor) with ICMP Jitter operation results, measuring round-trip time, jitter, packet loss, and one-way latency by sending a stream of ICMP TIMESTAMP packets to a destination. Its latest-operation table reports the number of RTT samples, sum and sum-of-squares of RTT, min/max RTT, and positive/negative jitter statistics (min, max, count, sum, sum-of-squares) split by source-to-destination (SD) and destination-to-source (DS) direction. As a performance MIB it lets an administrator measure directional jitter asymmetry — useful for diagnosing one-way voice-quality problems that round-trip-only measurements would miss. It is deployed on Cisco routers running IP SLA ICMP Jitter probes. Engineers can download the CISCO-RTTMON-ICMP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-RTTMON-ICMP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco routers (IP SLA ICMP Jitter probes)

Monitoring Examples

A network engineer compares rttMonLatestIcmpJitterSumPosSD against SumPosDS to determine whether jitter is worse in one direction than the other on a path being evaluated for VoIP traffic.

What Can Be Monitored

directional (SD/DS) round-trip time and jitter statistics

Imported Objects

From CISCO-RTTMON-MIB

rttMonCtrlAdminIndex	OBJECT-TYPE
rttMonLatestOper	OBJECT-IDENTITY
rttMonStats	OBJECT-IDENTITY

From CISCO-RTTMON-TC-MIB

RttResponseSense

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

TimeStamp

How to Use in IPNetwork Monitor

Example using rttMonIcmpJitterStatsCompletions OID:

Select a Cisco router (IP SLA ICMP Jitter probes) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type rttMonIcmpJitterStatsCompletions into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of ICMP jitter operation that have completed successfully. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the jitter climbs well above its normal baseline, since rising jitter often signals network congestion or a degrading path. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoRttMonIcmpCompliances	1.3.6.1.4.1.9.9.486.2.1
ciscoRttMonIcmpJitterCompliance	1.3.6.1.4.1.9.9.486.2.1.1			The compliance statement for (1) ICMP Jitter operation and statistics
ciscoRttMonIcmpJitterGroup	1.3.6.1.4.1.9.9.486.2.2.1			A collection of statistics objects related to ICMP Jitter Probe.
ciscoRttMonIcmpMIB	1.3.6.1.4.1.9.9.486			An extension to the CISCO-RTTMON-MIB for ICMP operations. The ICMP Jitter operation provides capability to measure metrics such as RTT (Round Trip Time), Jitter, packet loss, one-way latency by sending ICMP TIMESTAMP stream to the destination devices.
ciscoRttMonIcmpMIBConform	1.3.6.1.4.1.9.9.486.2
ciscoRttMonIcmpMIBGroups	1.3.6.1.4.1.9.9.486.2.2
ciscoRttMonIcmpMIBNotifs	1.3.6.1.4.1.9.9.486.0
ciscoRttMonIcmpMIBObjects	1.3.6.1.4.1.9.9.486.1
G32 rttMonIcmpJitterMaxSucPktLoss	1.3.6.1.4.1.9.9.42.1.3.8.1.56	Gauge32	read-only	The maximum number of packets that are dropped successively.
G32 rttMonIcmpJitterMinSucPktLoss	1.3.6.1.4.1.9.9.42.1.3.8.1.55	Gauge32	read-only	The minimum number of packets that are dropped successively.
G32 rttMonIcmpJitterStatsAvgJ	1.3.6.1.4.1.9.9.42.1.3.8.1.52	Gauge32	read-only	The average of positive and negative jitter values for source-to-destination and destination-to-source direction.
G32 rttMonIcmpJitterStatsAvgJDS	1.3.6.1.4.1.9.9.42.1.3.8.1.54	Gauge32	read-only	The average of positive and negative jitter values in destination-to-source direction.
G32 rttMonIcmpJitterStatsAvgJSD	1.3.6.1.4.1.9.9.42.1.3.8.1.53	Gauge32	read-only	The average of positive and negative jitter values in source-to-destination direction.
C32 rttMonIcmpJitterStatsBusies	1.3.6.1.4.1.9.9.42.1.3.8.1.40	Counter32	read-only	The number of occasions when a ICMP jitter operation could not be initiated because a previous ICMP jitter operation has not been completed.
C32 rttMonIcmpJitterStatsCompletionsEx	1.3.6.1.4.1.9.9.42.1.3.8.1.2	Counter32	read-only	The number of ICMP jitter operation that have completed successfully.
rttMonIcmpJitterStatsEntry	1.3.6.1.4.1.9.9.42.1.3.8.1		not-accessible	An entry in ICMP jitter stats table. Each entry contains the objects which accumulate the results of a series of RTT operations over a 60 minute time period or a time period stored in rttMonScheduleAdminRttLife, whichever is smaller.
C32 rttMonIcmpJitterStatsErrors	1.3.6.1.4.1.9.9.42.1.3.8.1.39	Counter32	read-only	The number of occasions when a ICMP jitter operation could not be initiated because of an internal error
G32 rttMonIcmpJitterStatsIAJIn	1.3.6.1.4.1.9.9.42.1.3.8.1.58	Gauge32	read-only	Inter-arrival jitter (RFC 1889) at sender
G32 rttMonIcmpJitterStatsIAJOut	1.3.6.1.4.1.9.9.42.1.3.8.1.57	Gauge32	read-only	Inter-arrival jitter (RFC 1889) at responder
G32 rttMonIcmpJitterStatsMaxNegDS	1.3.6.1.4.1.9.9.42.1.3.8.1.29	Gauge32	read-only	The maximum of all negative jitter values for packets sent from destination to source.
G32 rttMonIcmpJitterStatsMaxNegSD	1.3.6.1.4.1.9.9.42.1.3.8.1.17	Gauge32	read-only	The maximum of all negative jitter values for packets sent from source to destination.
G32 rttMonIcmpJitterStatsMaxPosDS	1.3.6.1.4.1.9.9.42.1.3.8.1.23	Gauge32	read-only	The maximum of all positive jitter values for packets sent from destination to source.
G32 rttMonIcmpJitterStatsMaxPosSD	1.3.6.1.4.1.9.9.42.1.3.8.1.11	Gauge32	read-only	The maximum of absolute values of all positive jitter values for packets sent from source to destination.
G32 rttMonIcmpJitterStatsMinNegDS	1.3.6.1.4.1.9.9.42.1.3.8.1.28	Gauge32	read-only	The minimum of all negative jitter values for packets sent from destination to source.
G32 rttMonIcmpJitterStatsMinNegSD	1.3.6.1.4.1.9.9.42.1.3.8.1.16	Gauge32	read-only	The minimum of all negative jitter values for packets sent from source to destination.
G32 rttMonIcmpJitterStatsMinPosDS	1.3.6.1.4.1.9.9.42.1.3.8.1.22	Gauge32	read-only	The minimum of all positive jitter values for packets sent from destination to source.
G32 rttMonIcmpJitterStatsMinPosSD	1.3.6.1.4.1.9.9.42.1.3.8.1.10	Gauge32	read-only	The minimum of absolute values of all positive jitter values for packets sent from source to destination.
C32 rttMonIcmpJitterStatsNumNegDSes	1.3.6.1.4.1.9.9.42.1.3.8.1.30	Counter32	read-only	The number of all negative jitter values for packets sent from destination to source.
C32 rttMonIcmpJitterStatsNumNegSDs	1.3.6.1.4.1.9.9.42.1.3.8.1.18	Counter32	read-only	The number of all negative jitter values for packets sent from source to destination.
C32 rttMonIcmpJitterStatsNumOWs	1.3.6.1.4.1.9.9.42.1.3.8.1.51	Counter32	read-only	The number of one way trip time that are successfully measured.
C32 rttMonIcmpJitterStatsNumPosDSes	1.3.6.1.4.1.9.9.42.1.3.8.1.24	Counter32	read-only	The number of all positive jitter values for packets sent from destination to source.
C32 rttMonIcmpJitterStatsNumPosSDs	1.3.6.1.4.1.9.9.42.1.3.8.1.12	Counter32	read-only	The number of all positive jitter values for packets sent from source to destination.
C32 rttMonIcmpJitterStatsNumRTTs	1.3.6.1.4.1.9.9.42.1.3.8.1.4	Counter32	read-only	The number of RTT's that are successfully measured.
G32 rttMonIcmpJitterStatsOWMaxDS	1.3.6.1.4.1.9.9.42.1.3.8.1.50	Gauge32	read-only	The maximum of all one way trip time from destination to source.
G32 rttMonIcmpJitterStatsOWMaxSD	1.3.6.1.4.1.9.9.42.1.3.8.1.45	Gauge32	read-only	The maximum of all one way trip time from source to destination.
G32 rttMonIcmpJitterStatsOWMinDS	1.3.6.1.4.1.9.9.42.1.3.8.1.49	Gauge32	read-only	The minimum of all one way trip time from destination to source.
G32 rttMonIcmpJitterStatsOWMinSD	1.3.6.1.4.1.9.9.42.1.3.8.1.44	Gauge32	read-only	The minimum of all one way trip time from source to destination.
C32 rttMonIcmpJitterStatsOWSumDSes	1.3.6.1.4.1.9.9.42.1.3.8.1.46	Counter32	read-only	The sum of one way trip time from destination to source.
C32 rttMonIcmpJitterStatsOWSumSDs	1.3.6.1.4.1.9.9.42.1.3.8.1.41	Counter32	read-only	The sum of one way trip time from source to destination.
C32 rttMonIcmpJitterStatsPktLateAs	1.3.6.1.4.1.9.9.42.1.3.8.1.59	Counter32	read-only	The number of packets that arrived after the timeout.
C32 rttMonIcmpJitterStatsPktLosses	1.3.6.1.4.1.9.9.42.1.3.8.1.34	Counter32	read-only	The number of lost packets
C32 rttMonIcmpJitterStatsPktSkippeds	1.3.6.1.4.1.9.9.42.1.3.8.1.38	Counter32	read-only	The number of packets that are skipped per operation because the router could not send the packet out.
G32 rttMonIcmpJitterStatsRTTMax	1.3.6.1.4.1.9.9.42.1.3.8.1.9	Gauge32	read-only	The maximum of RTT's that were successfully measured.
G32 rttMonIcmpJitterStatsRTTMin	1.3.6.1.4.1.9.9.42.1.3.8.1.8	Gauge32	read-only	The minimum of RTT's that were successfully measured.
C32 rttMonIcmpJitterStatsRTTSums	1.3.6.1.4.1.9.9.42.1.3.8.1.5	Counter32	read-only	The sum of RTT's that are successfully measured for this rttMonIcmpJitterStatsStartTimeId hourly group. The number of the successfully measured RTT is stored in the rttMonIcmpJitterStatsNumRTT.
TIM rttMonIcmpJitterStatsStartTimeId	1.3.6.1.4.1.9.9.42.1.3.8.1.1	TimeStamp	not-accessible	The value of sysUpTime at the time when this row was created.
C32 rttMonIcmpJitterStatsSumNegDSes	1.3.6.1.4.1.9.9.42.1.3.8.1.31	Counter32	read-only	The sum of all negative jitter values for packets sent from destination to source. The number of such values is stored in rttMonIcmpJitterStatsNumNegDS.
C32 rttMonIcmpJitterStatsSumNegSDs	1.3.6.1.4.1.9.9.42.1.3.8.1.19	Counter32	read-only	The sum of all negative jitter values for packets sent from source to destination. The number of such values is stored in rttMonIcmpJitterStatsNumNegSD.
C32 rttMonIcmpJitterStatsSumPosDSes	1.3.6.1.4.1.9.9.42.1.3.8.1.25	Counter32	read-only	The sum of all positive jitter values for packets sent from destination to source. The number of such values is stored in rttMonIcmpJitterStatsNumPosDS.
C32 rttMonIcmpJitterStatsSumPosSDs	1.3.6.1.4.1.9.9.42.1.3.8.1.13	Counter32	read-only	The sum of all positive jitter values for packets sent from source to destination. The number of such values is stored in rttMonIcmpJitterStatsNumPosSD.
rttMonIcmpJitterStatsTable	1.3.6.1.4.1.9.9.42.1.3.8		not-accessible	The ICMP Jitter statistics table contains summarized information of the results for a conceptual RTT control row. A rolling accumulated history of this information is maintained in a series of hourly 'group(s)'. When rttMonIcmpJitterStatsStartTimeId groups exceeds the rttMonStatisticsAdminNumHourGroups value, the oldest corresponding hourly group will be deleted and will be replaced with the new rttMonIcmpJitterStatsStartTimeId hourly group. The table is created only if the rttMonCtrlAdminRttType is 'icmpJitter' and the rttMonEchoAdminProtocol is 'icmpJitterAppl'. It will be removed when the corresponding conceptual RTT control row is destroyed.
C32 rttMonIcmpJStatsOverThresholds	1.3.6.1.4.1.9.9.42.1.3.8.1.3	Counter32	read-only	The number of ICMP jitter operations that violate jitterAvg threshold which is defined in RttMonReactVar.
C32 rttMonIcmpJStatsOWSum2DSHighs	1.3.6.1.4.1.9.9.42.1.3.8.1.48	Counter32	read-only	The sum of squares of one way trip time from destination to source (high order 32 bits).
C32 rttMonIcmpJStatsOWSum2DSLows	1.3.6.1.4.1.9.9.42.1.3.8.1.47	Counter32	read-only	The sum of squares of one way trip time from destination to source (low order 32 bits).
C32 rttMonIcmpJStatsOWSum2SDHighs	1.3.6.1.4.1.9.9.42.1.3.8.1.43	Counter32	read-only	The sum of squares of one way trip time from source to destination (high order 32 bits).
C32 rttMonIcmpJStatsOWSum2SDLows	1.3.6.1.4.1.9.9.42.1.3.8.1.42	Counter32	read-only	The sum of squares of one way trip time from source to destination (low order 32 bits).
C32 rttMonIcmpJStatsPktOutSeqBoth	1.3.6.1.4.1.9.9.42.1.3.8.1.35	Counter32	read-only	The number of packets arrived out of sequence in both source-to-destination and destination-to-source direction.
C32 rttMonIcmpJStatsPktOutSeqDSes	1.3.6.1.4.1.9.9.42.1.3.8.1.37	Counter32	read-only	The number of packets arrived out of sequence in the direction of destination-to-source.
C32 rttMonIcmpJStatsPktOutSeqSDs	1.3.6.1.4.1.9.9.42.1.3.8.1.36	Counter32	read-only	The number of packets arrived out of sequence in the direction of source-to-destination.
C32 rttMonIcmpJStatsRTTSum2Highs	1.3.6.1.4.1.9.9.42.1.3.8.1.7	Counter32	read-only	The sum of squares of RTT's that are successfully measured (high order 32 bits).
C32 rttMonIcmpJStatsRTTSum2Lows	1.3.6.1.4.1.9.9.42.1.3.8.1.6	Counter32	read-only	The sum of squares of RTT's that are successfully measured (low order 32 bits).
C32 rttMonIcmpJStatsSum2NegDSHighs	1.3.6.1.4.1.9.9.42.1.3.8.1.33	Counter32	read-only	The sum of squares of all negative jitter values for packets sent from destination to source (high order 32 bits).
C32 rttMonIcmpJStatsSum2NegDSLows	1.3.6.1.4.1.9.9.42.1.3.8.1.32	Counter32	read-only	The sum of squares of all negative jitter values for packets sent from destination to source (low order 32 bits).
C32 rttMonIcmpJStatsSum2NegSDHighs	1.3.6.1.4.1.9.9.42.1.3.8.1.21	Counter32	read-only	The sum of square of all negative jitter values for packets sent from source to destination (high order 32 bits).
C32 rttMonIcmpJStatsSum2NegSDLows	1.3.6.1.4.1.9.9.42.1.3.8.1.20	Counter32	read-only	The sum of square of all negative jitter values for packets sent from source to destination (low order 32 bits).
C32 rttMonIcmpJStatsSum2PosDSHighs	1.3.6.1.4.1.9.9.42.1.3.8.1.27	Counter32	read-only	The sum of squares of all positive jitter values for packets sent from destination to source (high order 32 bits).
C32 rttMonIcmpJStatsSum2PosDSLows	1.3.6.1.4.1.9.9.42.1.3.8.1.26	Counter32	read-only	The sum of squares of all positive jitter values for packets sent from destination to source (low order 32 bits).
C32 rttMonIcmpJStatsSum2PosSDHighs	1.3.6.1.4.1.9.9.42.1.3.8.1.15	Counter32	read-only	The sum of square of all positive jitter values for packets sent from source to destination (high order 32 bits).
C32 rttMonIcmpJStatsSum2PosSDLows	1.3.6.1.4.1.9.9.42.1.3.8.1.14	Counter32	read-only	The sum of square of all positive jitter values for packets sent from source to destination (low order 32 bits).
G32 rttMonLatestIcmpJitterAvgDSJ	1.3.6.1.4.1.9.9.42.1.5.4.1.46	Gauge32	read-only	The average of positive and negative jitter values from destination to source.
G32 rttMonLatestIcmpJitterAvgJitter	1.3.6.1.4.1.9.9.42.1.5.4.1.44	Gauge32	read-only	The average of positive and negative jitter values in Source-to-Destionation and Destination-to-Source direction.
G32 rttMonLatestIcmpJitterAvgSDJ	1.3.6.1.4.1.9.9.42.1.5.4.1.45	Gauge32	read-only	The average of positive and negative jitter values from source to destination.
G32 rttMonLatestIcmpJitterIAJIn	1.3.6.1.4.1.9.9.42.1.5.4.1.50	Gauge32	read-only	Inter-arrival jitter (RFC 1889) at source.
G32 rttMonLatestIcmpJitterIAJOut	1.3.6.1.4.1.9.9.42.1.5.4.1.49	Gauge32	read-only	Inter-arrival jitter (RFC 1889) at responder.
G32 rttMonLatestIcmpJitterMaxNegDS	1.3.6.1.4.1.9.9.42.1.5.4.1.22	Gauge32	read-only	The maximum of all negative jitter values for packets sent from destination to source.
G32 rttMonLatestIcmpJitterMaxNegSD	1.3.6.1.4.1.9.9.42.1.5.4.1.12	Gauge32	read-only	The maximum of absolute values of all negative jitter values for packets sent from source to destination.
G32 rttMonLatestIcmpJitterMaxPosDS	1.3.6.1.4.1.9.9.42.1.5.4.1.17	Gauge32	read-only	The maximum of all positive jitter values for packets sent from destination to source.
G32 rttMonLatestIcmpJitterMaxPosSD	1.3.6.1.4.1.9.9.42.1.5.4.1.7	Gauge32	read-only	The maximum of all positive jitter values for packets sent from source to destination.
G32 rttMonLatestIcmpJitterMaxSucPktL	1.3.6.1.4.1.9.9.42.1.5.4.1.34	Gauge32	read-only	The maximum number of packets that are dropped successively.
G32 rttMonLatestIcmpJitterMinNegDS	1.3.6.1.4.1.9.9.42.1.5.4.1.21	Gauge32	read-only	The minimum of all negative jitter values for packets sent from destination to source.
G32 rttMonLatestIcmpJitterMinNegSD	1.3.6.1.4.1.9.9.42.1.5.4.1.11	Gauge32	read-only	The minimum of absolute values of all negative jitter values for packets sent from source to destination.
G32 rttMonLatestIcmpJitterMinPosDS	1.3.6.1.4.1.9.9.42.1.5.4.1.16	Gauge32	read-only	The minimum of all positive jitter values for packets sent from destination to source.
G32 rttMonLatestIcmpJitterMinPosSD	1.3.6.1.4.1.9.9.42.1.5.4.1.6	Gauge32	read-only	The minimum of all positive jitter values for packets sent from source to destination.
G32 rttMonLatestIcmpJitterMinSucPktL	1.3.6.1.4.1.9.9.42.1.5.4.1.33	Gauge32	read-only	The minimum number of packets that are dropped successively.
G32 rttMonLatestIcmpJitterNumNegDS	1.3.6.1.4.1.9.9.42.1.5.4.1.23	Gauge32	read-only	The number of all negative jitter values for packets sent from destination to source.
G32 rttMonLatestIcmpJitterNumNegSD	1.3.6.1.4.1.9.9.42.1.5.4.1.13	Gauge32	read-only	The number of all negative jitter values for packets sent from source to destination.
G32 rttMonLatestIcmpJitterNumOW	1.3.6.1.4.1.9.9.42.1.5.4.1.43	Gauge32	read-only	The number of successful one way trip time measurements.
G32 rttMonLatestIcmpJitterNumPosDS	1.3.6.1.4.1.9.9.42.1.5.4.1.18	Gauge32	read-only	The number of all positive jitter values for packets sent from destination to source.
G32 rttMonLatestIcmpJitterNumPosSD	1.3.6.1.4.1.9.9.42.1.5.4.1.8	Gauge32	read-only	The number of all positive jitter values for packets sent from source to destination.
G32 rttMonLatestIcmpJitterNumRTT	1.3.6.1.4.1.9.9.42.1.5.4.1.1	Gauge32	read-only	The number of RTT's that were successfully measured.
rttMonLatestIcmpJitterOperEntry	1.3.6.1.4.1.9.9.42.1.5.4.1		not-accessible	A list of objects that record the latest ICMP jitter operation.
rttMonLatestIcmpJitterOperTable	1.3.6.1.4.1.9.9.42.1.5.4		not-accessible	A table which contains the status of latest ICMP Jitter operation. Each conceptual row corresponds to a ICMP jitter probe defined in rttMonCtrlAdminTable and has same index as rttMonCtrlAdminTable. An entry in this table is created only if the rttMonCtrlAdminRttType is 'icmpJitter', the rttMonEchoAdminProtocol is 'icmpJitterAppl' and valid rttMonEchoAdminTargetAddress is configured. The entry will start to collect data when rttMonCtrlAdminStatus from rttMonCtrlAdminStatus is in 'active' state. The entry will be removed when the rttMonCtrlAdminStatus is in 'destroy' state.
G32 rttMonLatestIcmpJitterOWAvgDS	1.3.6.1.4.1.9.9.42.1.5.4.1.48	Gauge32	read-only	The average one way trip time from destination to source.
G32 rttMonLatestIcmpJitterOWAvgSD	1.3.6.1.4.1.9.9.42.1.5.4.1.47	Gauge32	read-only	The average one way trip time from source to destination.
G32 rttMonLatestIcmpJitterOWMaxDS	1.3.6.1.4.1.9.9.42.1.5.4.1.42	Gauge32	read-only	The maximum of all one way trip time from destination to source.
G32 rttMonLatestIcmpJitterOWMaxSD	1.3.6.1.4.1.9.9.42.1.5.4.1.38	Gauge32	read-only	The maximum of all one way trip time from source to destination.
G32 rttMonLatestIcmpJitterOWMinDS	1.3.6.1.4.1.9.9.42.1.5.4.1.41	Gauge32	read-only	The minimum of all one way trip time from destination to source.
G32 rttMonLatestIcmpJitterOWMinSD	1.3.6.1.4.1.9.9.42.1.5.4.1.37	Gauge32	read-only	The minimum of all one way trip time from source to destination.
G32 rttMonLatestIcmpJitterOWSum2DS	1.3.6.1.4.1.9.9.42.1.5.4.1.40	Gauge32	read-only	The sum of squares of one way trip time from destination to source.
G32 rttMonLatestIcmpJitterOWSum2SD	1.3.6.1.4.1.9.9.42.1.5.4.1.36	Gauge32	read-only	The sum of squares of one way trip time from source to destination.
G32 rttMonLatestIcmpJitterOWSumDS	1.3.6.1.4.1.9.9.42.1.5.4.1.39	Gauge32	read-only	The sum of one way trip time from destination to source.
G32 rttMonLatestIcmpJitterOWSumSD	1.3.6.1.4.1.9.9.42.1.5.4.1.35	Gauge32	read-only	The sum of one way trip time from source to destination.
G32 rttMonLatestIcmpJitterPktLateA	1.3.6.1.4.1.9.9.42.1.5.4.1.32	Gauge32	read-only	The number of packets that arrived after the timeout.
G32 rttMonLatestIcmpJitterPktLoss	1.3.6.1.4.1.9.9.42.1.5.4.1.26	Gauge32	read-only	The number of packets lost.
G32 rttMonLatestIcmpJitterPktSkipped	1.3.6.1.4.1.9.9.42.1.5.4.1.30	Gauge32	read-only	The number of packets in the operation that could not be initiated due to an internal error.
G32 rttMonLatestIcmpJitterRTTMax	1.3.6.1.4.1.9.9.42.1.5.4.1.5	Gauge32	read-only	The maximum of RTT's that were successfully measured.
G32 rttMonLatestIcmpJitterRTTMin	1.3.6.1.4.1.9.9.42.1.5.4.1.4	Gauge32	read-only	The minimum of RTT's that were successfully measured.
G32 rttMonLatestIcmpJitterRTTSum	1.3.6.1.4.1.9.9.42.1.5.4.1.2	Gauge32	read-only	The sum of RTT's that are successfully measured. The number of successfully measured RTT is stored in rttMonLatestIcmpJitterNumRTT.
G32 rttMonLatestIcmpJitterRTTSum2	1.3.6.1.4.1.9.9.42.1.5.4.1.3	Gauge32	read-only	The sum of squares of RTT's that are successfully measured.
RTT rttMonLatestIcmpJitterSense	1.3.6.1.4.1.9.9.42.1.5.4.1.31	RttResponseSense	read-only	An application specific sense code for the completion status.
G32 rttMonLatestIcmpJitterSum2NegDS	1.3.6.1.4.1.9.9.42.1.5.4.1.25	Gauge32	read-only	The sum of squares of all negative jitter values for packets sent from destination to source.
G32 rttMonLatestIcmpJitterSum2NegSD	1.3.6.1.4.1.9.9.42.1.5.4.1.15	Gauge32	read-only	The sum of square of all negative jitter values for packets sent from source to destination.
G32 rttMonLatestIcmpJitterSum2PosDS	1.3.6.1.4.1.9.9.42.1.5.4.1.20	Gauge32	read-only	The sum of squares of all positive jitter values for packets sent from destination to source.
G32 rttMonLatestIcmpJitterSum2PosSD	1.3.6.1.4.1.9.9.42.1.5.4.1.10	Gauge32	read-only	The sum of square of all positive jitter values for packets sent from source to destination.
G32 rttMonLatestIcmpJitterSumNegDS	1.3.6.1.4.1.9.9.42.1.5.4.1.24	Gauge32	read-only	The sum of all negative jitter values for packets sent from destination to source. The number of such values is stored in rttMonLatestIcmpJitterNumNegDS.
G32 rttMonLatestIcmpJitterSumNegSD	1.3.6.1.4.1.9.9.42.1.5.4.1.14	Gauge32	read-only	The sum of all negative jitter values for packets sent from source to destination. The number of such values is stored in rttMonLatestIcmpJitterNumNegSD.
G32 rttMonLatestIcmpJitterSumPosDS	1.3.6.1.4.1.9.9.42.1.5.4.1.19	Gauge32	read-only	The sum of all positive jitter values for packets sent from destination to source. The number of such values is stored in rttMonLatestIcmpJitterNumPosDS.
G32 rttMonLatestIcmpJitterSumPosSD	1.3.6.1.4.1.9.9.42.1.5.4.1.9	Gauge32	read-only	The sum of all positive jitter values for packets sent source to destination. The number of such values is stored in rttMonLatestIcmpJitterNumPosSD.
G32 rttMonLatestIcmpJPktOutSeqBoth	1.3.6.1.4.1.9.9.42.1.5.4.1.27	Gauge32	read-only	The number of packets arrived out of sequence in both source-to-destination and destination-to-source direction.
G32 rttMonLatestIcmpJPktOutSeqDS	1.3.6.1.4.1.9.9.42.1.5.4.1.29	Gauge32	read-only	The number of packets arrived out of sequence in the direction of destination-to-source.
G32 rttMonLatestIcmpJPktOutSeqSD	1.3.6.1.4.1.9.9.42.1.5.4.1.28	Gauge32	read-only	The number of packets arrived out of sequence in the direction of source-to-destination.

RFC description

Provides IP SLA ICMP Jitter measurement capabilities including RTT, packet loss, and one-way latency metrics.

Start monitoring Cisco routers (IP SLA ICMP Jitter probes) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-RTTMON-ICMP-MIB