CISCO-LWAPP-CLOUD-SERVICES-MIB

All MIBs › CISCO-LWAPP-CLOUD-SERVICES-MIB

Organization: Cisco Systems Inc.

Last Updated: 2018-07-03

Category: Cisco Devices, Wireless and WLAN

Description: Manages LWAPP WLC cloud services integration including connectivity and service subscription status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-LWAPP-CLOUD-SERVICES-MIB?

CISCO-LWAPP-CLOUD-SERVICES-MIB is a Cisco Systems proprietary MIB configuring cloud-based services — Network Assurance (NA), Connected Mobility Experience (CMX), and Data Externalization (dx) — on Cisco Wireless LAN Controllers terminating the LWAPP tunnel from lightweight access points. Its objects cover the cloud NA server URL/ID-token, on-change enable, sync interval, subscription action/topic, a reset-subscriptions action, a channel table (name, sync interval, on-change mode, filter-channel flag, row status), and a telemetry filter-collection (FC) table (name, parent, sub-status, filter count, row status) with a related filter table. As a configuration/status MIB it lets an administrator confirm which telemetry channels are streaming to Cisco's cloud Assurance service. It is deployed on Cisco Wireless LAN Controllers using cloud-based Network Assurance/CMX. Engineers can download the CISCO-LWAPP-CLOUD-SERVICES-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-LWAPP-CLOUD-SERVICES-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Wireless LAN Controllers (LWAPP, cloud services)

Monitoring Examples

An administrator checks clCSNAServerSyncInterval and clCSNAServerOnchangeEnable to confirm telemetry sync frequency to Cisco's cloud Assurance service on a wireless controller.

What Can Be Monitored

cloud telemetry channel configuration and sync status

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoLwappCloudServicesMIB	1.3.6.1.4.1.9.9.838			This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. This MIB provides configuration of Network Assurance (NA) ,Connected Mobility Experience (CMX) and Data Externalization(dx) which comes under Cloud services. Network Assurance (NA) Its a cloud based Assurance which provided by Cisco to monitor the health of the network by collecting data from controllers and Sensors. Connected Mobility Experience (CMX) The MIB is used for programming Cloud based CMX services. The Network Mobility Service Protocol(NMSP) data is exported to CMX Cloud Server through https connection. The NMSP encoding will remain as it is for the TCP/TLS connection. Use the MIB for configuring URL and Token ID and to enable this serrvice. The Controller will act as https client and will establish https connection with CMX URL. Controller will verify the CMX cloud server while the cloud server will authenticate the Controller using the configured id-token. Data Externalization(dx) dx is a feature in wlc which allows it to collect the data which may get published to the NA server for analaytics. The relationship between CC, NA server and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ + + + + + + + CC + + CC +.....+ NA + + + + + + + +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +..........+ + + + + + + + + + AP + + AP + + AP +......+ SENSOR + + + + + + + + AP + +......+ +......+ +......+ +..........+ . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ + + + + + + + + + MN + + MN + + MN + + MN + + + + + + + + + +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends them to the controller to which it is logically connected. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Mobile Node and client are used interchangeably. Sensors These are wireless clients which periodically connect to a wireless network, run some tests and report back the test status to Cisco Network Assurance Server. The sensors are controlled and instructed by the Network Assurance server. APs can be tentatively put in Sensor mode to do the Sensor Job. There can be dedicated sensors as well. Filtered Channels ( FC ) These are user-defined channels which use the filters configured by the user to choose and carry the required data.
clCSCMXConfig	1.3.6.1.4.1.9.9.838.1.3.2
clCSCMXConfigGroup	1.3.6.1.4.1.9.9.838.2.2.4			This collection of objects represent the configuration for Connected Mobility Experience (CMX) on the controller to be passed to an LWAPP AP. clCSCMXConfigGroup object is superseded by clCSCMXConfigGroupRev1.
clCSCMXConfigGroupRev1	1.3.6.1.4.1.9.9.838.2.2.15			This collection of objects represent the configuration for Connected Mobility Experience (CMX) on the controller to be passed to an LWAPP AP.
T/F clCSCMXEnable	1.3.6.1.4.1.9.9.838.1.3.2.1	TruthValue	read-write	This object specifies whether cloud services for CMX is enabled or disabled. A value of 'true' indicates that cloud services enables for CMX. A value of 'false' indicates that cloud services disables for CMX.
clCSCMXObjects	1.3.6.1.4.1.9.9.838.1.3
T/F clCSCMXOnPremisesEnable	1.3.6.1.4.1.9.9.838.1.3.2.2	TruthValue	read-write	This object specifies whether NMSP service for on-premises CMX is enabled or disabled. A value of 'true' indicates that NMSP service is enabled for on-premises CMX. A value of 'false' indicates that NMSP service is disabled for on-premises CMX.
clCSCMXServerConfig	1.3.6.1.4.1.9.9.838.1.3.1
clCSCMXServerConfigGroup	1.3.6.1.4.1.9.9.838.2.2.3			This collection of objects represent the configuration of Connected Mobility Experience (CMX) server on the controller to be passed to an LWAPP AP.
STR clCSCMXServerIdToken	1.3.6.1.4.1.9.9.838.1.3.1.2	SnmpAdminString	read-write	This object specifies the token id for cloud services server.
STR clCSCMXServerUrl	1.3.6.1.4.1.9.9.838.1.3.1.1	SnmpAdminString	read-write	This object specifies the URL for cloud services server.
clCSDxConfig	1.3.6.1.4.1.9.9.838.1.2.1
clCSDxConfigGroup	1.3.6.1.4.1.9.9.838.2.2.5			This collection of objects represent the configuration for data externalization(dx) on the controller to be passed to an LWAPP AP.
T/F clCSDxMode	1.3.6.1.4.1.9.9.838.1.2.1.1	TruthValue	read-write	This object specifies whether data externalization is enabled or disabled. A value of 'true' indicates that enables DX. A value of 'false' indicates that disables DX. It requires reboot after enable
clCSDXObjects	1.3.6.1.4.1.9.9.838.1.2
clCSFilterChanTableObjects	1.3.6.1.4.1.9.9.838.1.7
clCSMIBCompliance	1.3.6.1.4.1.9.9.838.2.1.1			The compliance statement for the SNMP entities that implement this MIB.
clCSMIBComplianceRev1	1.3.6.1.4.1.9.9.838.2.1.2			The compliance statement for the SNMP entities that implement this MIB.
clCSMIBComplianceRev2	1.3.6.1.4.1.9.9.838.2.1.3			The compliance statement for the SNMP entities that implement this MIB.
clCSMIBComplianceRev3	1.3.6.1.4.1.9.9.838.2.1.4			The compliance statement for the SNMP entities that implement this MIB.
clCSMIBCompliances	1.3.6.1.4.1.9.9.838.2.1
clCSMIBConform	1.3.6.1.4.1.9.9.838.2
clCSMIBGroups	1.3.6.1.4.1.9.9.838.2.2
clCSMIBNotifs	1.3.6.1.4.1.9.9.838.0
clCSMIBObjects	1.3.6.1.4.1.9.9.838.1
T/F clCSNAASIEnable	1.3.6.1.4.1.9.9.838.1.1.2.9	TruthValue	read-write	This object specifies whether Network Assurance Adaptive Sync Interval (ASI) mode is enabled or disabled. A value of 'true' indicates that Network Assurance ASI mode is enabled. A value of 'false' indicates that network assurance ASI mode is disabled.
T/F clCSNADiffSyncEnable	1.3.6.1.4.1.9.9.838.1.1.2.10	TruthValue	read-write	This object specifies whether Network Assurance diff sync is enabled or disabled. In diff sync mode only modified parameters are externalized from the controller. A value of 'true' indicates that network assurance diff sync mode is enabled. A value of 'false' indicates that network assurance diff sync mode is disabled.
T/F clCSNAEnable	1.3.6.1.4.1.9.9.838.1.1.2.1	TruthValue	read-write	This object specifies whether network assurance is enabled or disabled. A value of 'true' indicates that enables network assurance. A value of 'false' indicates that disables network assurance.
clCSNAGlobalConfig	1.3.6.1.4.1.9.9.838.1.1.2
clCSNAGlobalConfigGroup	1.3.6.1.4.1.9.9.838.2.2.2			This collection of objects represent the configuration of Network Assuranceon the controller to be passed to an LWAPP AP.
clCSNAGlobalConfigGroupRev1	1.3.6.1.4.1.9.9.838.2.2.11			This collection of objects represent the configuration of Network Assuranceon the controller to be passed to a Network Assurance Server. clCSNAGlobalConfigGroupRev1 object is superseded by clCSNAGlobalConfigGroupRev2.
clCSNAGlobalConfigGroupRev2	1.3.6.1.4.1.9.9.838.2.2.12			This collection of objects represent the configuration of network assurance on the controller to be passed to a network assurance server.
clCSNANotifs	1.3.6.1.4.1.9.9.838.0.0
clCSNAObjects	1.3.6.1.4.1.9.9.838.1.1
INT clCSNASensorBackhaulAuthType	1.3.6.1.4.1.9.9.838.1.1.2.3	INTEGER	read-write	This object specifies about authentication type of network assurance sensor backhaul. dot1x(1): This value represents the authentication type as dot1x. psk(2): This value represents the authentication type as psk. open(3): This value represents the authentication type as open.
INT clCSNASensorBackhaulEapType	1.3.6.1.4.1.9.9.838.1.1.2.4	INTEGER	read-write	This object specifies about Extensible Authentication Protocol (EAP) type of network assurance sensor backhaul. eapfast(1): This value represents the EAP type as eapfast. peap(2): This value represents the EAP type as peap. none(3): This value represents the EAP type as none.
STR clCSNASensorBackhaulPassword	1.3.6.1.4.1.9.9.838.1.1.2.6	SnmpAdminString	read-write	This object specifies about the password for dot1x authentication type of network assurance sensor backhaul.
STR clCSNASensorBackhaulPsk	1.3.6.1.4.1.9.9.838.1.1.2.8	SnmpAdminString	read-write	This object specifies about the psk value for psk authentication type of network assurance for sensor backhaul.
INT clCSNASensorBackhaulPskMode	1.3.6.1.4.1.9.9.838.1.1.2.7	INTEGER	read-write	This object specifies about the psk mode for psk authentication type of network assurance for sensor backhaul. ascii(1): This value represents psk mode as ascii. hex(2):This value represents psk mode as hex.
STR clCSNASensorBackhaulSSID	1.3.6.1.4.1.9.9.838.1.1.2.2	SnmpAdminString	read-write	This object specifies the SSID for network assurance sensor backhaul.
STR clCSNASensorBackhaulUsername	1.3.6.1.4.1.9.9.838.1.1.2.5	SnmpAdminString	read-write	This object specifies about the username for dot1x type authentication type of cloud services sensor backhaul.
INT clCSNASensorErrCode	1.3.6.1.4.1.9.9.838.1.1.3.3	INTEGER	accessible-for-notify	This object represents Sensor conectivity status. wsaSensorBackhaulWronSsid(1): This value indicated that NA server status as Invalid ssid. wsaSensorBackhaulInvalidCredential(2): This value indicated that NA server status as Invalid credentials. wsaSensorConnError(3): This value indicated that NA server status as Sensor connection error. wsaNAServerNotFound(4): This value indicated that NA server status as Server not found-404 wsaNAServerInternalError(5):This value indicated that NA server status as Sensor connection error.
MAC clCSNASensorLradMacAddr	1.3.6.1.4.1.9.9.838.1.1.3.1	MacAddress	accessible-for-notify	This object represents the AP mac adress of the sensor.
NTF clCSNASensorNotReachableDevStatus	1.3.6.1.4.1.9.9.838.0.0.1			This object is used to send a trap whenever the device status moves out of compliance with respect to smart-licensing
INT clCSNASensorStatus	1.3.6.1.4.1.9.9.838.1.1.3.2	INTEGER	accessible-for-notify	This object specifies Sensor reachablity to NA Server. wsaNoUpdate(1): This value indicated that NA server status as no update. wsaStatusOk(2): This value indicated that NA server status as Reachable. wsaServerUrlNotReachable(3): This value indicated that NA server status as Url not reachable. wsaServerwrongIdToken(4): This value indicated that NA server status as Wrong Id token configured. wsaServerProxyNotReachable(5): This value indicated that NA server status as Proxy server not reachable. wsaSensorIntf24Error(6): This value indicated that NA server status as Sensor backhaul error. wsaSensorIntf24ProxyError(7): This value indicated that NA server status as Sensor backhaul error. wsaSensorIntf50Error(8): This value indicated that NA server status as Sensor backhaul error. wsaSensorIntf50ProxyError(9): This value indicated that NA server status as Sensor backhaul error. wsaApLicenseDenied(10): This value indicated that NA server status as License denied. wsaNAServerUnreachable(11): This value indicated that NA server status as Cloud server not reachable. wsaAttemptAssocToRoot(12): This value indicated that NA server status as attempeting the assocation. wsaAssocToRoot(13): This value indicated that NA server status as Associated to Root. wsaTestCfgRcvd(14): This value indicated that NA server status as Test coverage Recieved. wsaStatusmax(15): This value indicated that NA server status as Status maximum.
clCSNASensorTrapGroup	1.3.6.1.4.1.9.9.838.2.2.7			This supplemental collection of objects represents the NA related notifications sent by the agent to a network management station.
cLCSNAServerChannelEntry	1.3.6.1.4.1.9.9.838.1.1.4.1.1		not-accessible	Each entry in this table represents and includes the attributes needed for subscribing a NA server channel
STR clCSNAServerChannelName	1.3.6.1.4.1.9.9.838.1.1.4.1.1.1	SnmpAdminString	not-accessible	This object specifies the NA server channel name to subscribe/unsubscribe/set sync interval/set on-change mode based on the value of respective objects. 'ap': This value indicates aps channel. 'ap-fra': This value indicates ap-fra channel. 'ap-capwap': This value indicates ap-capwap channel. 'ap-channel': This value indicates ap-channel channel. 'ap-fra-sensor': This value indicates ap-fra-sensor channel. 'ap-interface-stats': This value indicates ap-interface-stats channel. 'ap-inventory': This value indicates ap-inventory channel. 'ap-network-stats': This value indicates ap-network-stats channel. 'ap-reports': This value indicates ap-reports channel. 'ap-rf': This value indicates ap-rf channel. 'ap-rf-neighbors': This value indicates ap-rf-neighbors channel. 'ap-rf-stats': This value indicates ap-rf-stats channel. 'ap-events': This value indicates ap-events channel. 'ap-system': This value indicates ap-system channel. 'cdp': This value indicates cdp channel. 'client-app-stats': This value indicates client-app-stats channel. 'client-mobility-stats': This value indicates client-mobility-stats channel. 'client-network-stats': This value indicates client-network-stats channel. 'client-policies': This value indicates client-policies channel. 'client-reports': This value indicates client-reports channel. 'client-rf-measurements': This value indicates client-rf-measurements channel. 'client-traffic-measurements': This value indicates client-traffic-measurements channel. 'client-wireless-stats': This value indicates client-wireless-stats channel. 'client-dns-reports': This value indicates client-dns-reports channel. 'client-events': This value indicates client-events channel. 'client': This value indicates clients channel. 'dhcp': This value indicates dhcp channel. 'eogre': This value indicates eogre channel. 'fabric': This value indicates fabric channel. 'interferers': This value indicates interferers channel. 'licensing': This value indicates licensing channel. 'mobility': This value indicates mobility channel. 'ndp': This value indicates ndp channel. 'radius-events': This value indicates radius-events channel. 'radius': This value indicates radius channel. 'redundancy-events': This value indicates redundancy-events channel. 'redundancy': This value indicates redundancy channel. 'rogues': This value indicates rogues channel. 'scan-reports': This value indicates scan-reports channel. 'system-core-stats': This value indicates system-core-stats channel. 'system-dataplane-stats': This value indicates system-dataplane-stats channel. 'system-general-stats': This value indicates system-general-stats channel. 'system-port-stats': This value indicates system-port-stats channel. 'system-process-stats': This value indicates system-process-stats channel. 'tacacs': This value indicates tacacs channel. : User can also specify filter channel name to subscribe
T/F clCSNAServerChannelOnChangeMode	1.3.6.1.4.1.9.9.838.1.1.4.1.1.3	TruthValue	read-create	This object specifies the value of on-change mode of a NA server channel. Only the changed data is synced if it's enabled. A value of 'true' indicates that only changed data will be synced. A value of 'false' indicates that all the data present in DB will be synced. This object can't be used to set on-change mode for filter-channels.
ROW clCSNAServerChannelRowStatus	1.3.6.1.4.1.9.9.838.1.1.4.1.1.5	RowStatus	read-create	This is the status column for this row and is used to create and delete specific instances of rows in this table.
INT clCSNAServerChannelSyncInterval	1.3.6.1.4.1.9.9.838.1.1.4.1.1.2	INTEGER	read-create	This object specifies the NA server channel sync interval. fifteen(15): This value indicates 15 sec interval thirty(30): This value indicates 30 sec interval sixty(60): This value indicates 60 sec interval threehundred(300): This value indicates 300 sec interval. This object can't be used to set interval for filter-channels.
cLCSNAServerChannelTable	1.3.6.1.4.1.9.9.838.1.1.4.1		not-accessible	This table represents NA server subscription channel related configurations.
clCSNAServerConfig	1.3.6.1.4.1.9.9.838.1.1.1
clCSNAServerConfigGroup	1.3.6.1.4.1.9.9.838.2.2.1			This collection of objects represent the configuration of server on the controller to be passed to an LWAPP AP.
clCSNAServerConfigTable	1.3.6.1.4.1.9.9.838.1.1.4
STR clCSNAServerIdToken	1.3.6.1.4.1.9.9.838.1.1.1.2	SnmpAdminString	read-write	This object specifies the token id for network assurance server.
T/F clCSNAServerIsFilterChannel	1.3.6.1.4.1.9.9.838.1.1.4.1.1.4	TruthValue	read-only	This object represents whether the given channel is filter channel or static channel. A value of 'true' indicates that the channel is filter channel A value of 'false' indicates that the channel is static channel
T/F clCSNAServerOnchangeEnable	1.3.6.1.4.1.9.9.838.1.1.1.3	TruthValue	read-write	This object specifies the type of telemetry data that will be externalized from the controller. The type can be bulk or onChange. With onChange enabled, NA server will receive only the change in data. With onChange disabled, NA server will receive the entire dataset(bulk) A value of 'true' indicates that onchange is enabled. A value of 'false' indicates that onChange is disabled. clCSNAServerOnchangeEnable object is superseded by clCSNAServerChannelOnChangeMode.
T/F cLCSNAServerResetSubscriptions	1.3.6.1.4.1.9.9.838.1.1.1.7	TruthValue	read-write	This object specfies the option to reset NA server channel subscriptions to defaults. A value of 'true' indicates that subscriptions are reset. A value of 'false' indicates that subscriptions are not reset. User can only set the value 'true'. Read on this object always returns the value 'false'.
INT clCSNAServerSubscriptionAction	1.3.6.1.4.1.9.9.838.1.1.1.5	INTEGER	read-write	This object specifies the possible modifications to the data content in the telemetry stream sent to the NA server. add - will add the specified channel to the telemetry data stream remove - will remove the specified channel from the telemetry data stream clCSNAServerSubscriptionAction object is superseded by clCSNAServerChannelRowStatus.
BIT clCSNAServerSubscriptionTopic	1.3.6.1.4.1.9.9.838.1.1.1.6	Bits	read-write	This object specifies the channels that can be modified in the telemetry data stream that is sent to the NA server. The user can configure a channel from the given enums system(0) - Configures the system channel network(1) - Configures the network channel client(2) - Configures the client channel ap(3) - Configures the AP channel rogue(4) - Configures the rogue channel interferer(5) - Configures the interferer channel apEvent(6) - Configures the ap-event channel clientEvent(7) - Configures the client-event channel scanReport(8) - Configures the scan-report channel clientDnsReport(9) - Configures the client-dns-report channel fra(10) - Configures the fra channel mapserver(11) - Configures the mapserver channel clCSNAServerSubscriptionTopic object is superseded by clCSNAServerChannelName .
INT clCSNAServerSyncInterval	1.3.6.1.4.1.9.9.838.1.1.1.4	INTEGER	read-write	This object specifies the frequency at which the telemetry data would be received at the NA server. fixed - The controller will provide the telemetry data once in every 5 minutes adaptive - The controller will provide the telemetry data once in every 30 seconds clCSNAServerSyncInterval object is superseded by clCSNAServerChannelSyncInterval.
STR clCSNAServerUrl	1.3.6.1.4.1.9.9.838.1.1.1.1	SnmpAdminString	read-write	This object specifies the URL for network assurance server.
clCSNATrapGroup	1.3.6.1.4.1.9.9.838.2.2.6			This collection of objects represent the trap configuration of NA sent by the agent to a network management station.
clCSNATrapMgmtObjects	1.3.6.1.4.1.9.9.838.1.1.3
clCSSecTunConfig	1.3.6.1.4.1.9.9.838.1.4.1
clCSSecTunConfigGroup	1.3.6.1.4.1.9.9.838.2.2.8			This collection of objects represent the secure Tunnel configuration.
INT clCSSecTunCurrentState	1.3.6.1.4.1.9.9.838.1.4.2.1	INTEGER	read-only	This object represents the current state of the secure tunnel. secureTunnelDown(1): This value indicates that secure tunnel is down. secureTunnelUp(2): This values indicates that secure tunnel is up.
T/F clCSSecTunEnable	1.3.6.1.4.1.9.9.838.1.4.1.1	TruthValue	read-write	This object specifies the status of secure tunnel mode on the controller. A value of 'true' indicates that, secure tunnel is enabled. A value of 'false' indicates that, secure tunnel is disabled.
clCSSecTunInfo	1.3.6.1.4.1.9.9.838.1.4.2
clCSSecTunInfoGroup	1.3.6.1.4.1.9.9.838.2.2.9			This collection of objects represent the secure Tunnel information.
IP clCSSecTunInnerIpAddr	1.3.6.1.4.1.9.9.838.1.4.2.5	InetAddress	read-only	This object represents the inner IP address of the TLS client on the controller. This IP is issued by TLS gateway as part of the secure tunnel setup and informed to TLS client as config update.
IPt clCSSecTunInnerIpAddrType	1.3.6.1.4.1.9.9.838.1.4.2.4	InetAddressType	read-only	This objects represents the IP address type of the TLS client.
clCSSecTunNotifs	1.3.6.1.4.1.9.9.838.0.1
clCSSecTunNotifsGroup	1.3.6.1.4.1.9.9.838.2.2.10			This supplemental collection of objects represents the Secure Tunnel related notifications sent by the agent to a network management station.
clCSSecTunObjects	1.3.6.1.4.1.9.9.838.1.4
STR clCSSecTunPskId	1.3.6.1.4.1.9.9.838.1.4.1.6	SnmpAdminString	read-write	This object specifies the PSK Id for the given WLC. Id along with clCSSecTunPskKey are used as part of secure tunnel setup with TLS gateway.
STR clCSSecTunPskKey	1.3.6.1.4.1.9.9.838.1.4.1.7	SnmpAdminString	read-write	This object specifies the key of the PSK cipher, which is used while setting up the secure tunnel with TLS gateway
T/F clCSSecTunRadiusEnable	1.3.6.1.4.1.9.9.838.1.4.1.8	TruthValue	read-write	This object specifies the secure tunneling status of RADIUS traffic like Authentication and Accounting servers. A value of 'true' indicates that, RADIUS traffic on secure tunnel is enabled. A value of 'false' indicates that, RADIUS traffic on secure tunnel is disabled.
cLCSSecTunRouteEntry	1.3.6.1.4.1.9.9.838.1.4.2.7.1		not-accessible	Each entry in this table represents attributes needed for adding a route for secure tunneling
cLCSSecTunRouteTable	1.3.6.1.4.1.9.9.838.1.4.2.7		not-accessible	This table represents the routes for various devices and networks currently managed by the secure tunnel module for tunneling of the management traffic. Plumbing and deletion of the routes to linux occurs based on the tunnel state changes.
T/F clCSSecTunSnmpTrapEnable	1.3.6.1.4.1.9.9.838.1.4.1.9	TruthValue	read-write	This object specifies the secure tunneling trap is enabled or disabled. A value of 'true' indicates that secure tunnel status trap is enabled. A value of 'false' indicates that secure tunnel status trap is disabled.
NTF clCSSecTunStateChange	1.3.6.1.4.1.9.9.838.0.1.1			This object is used to send secure tunnel status change.
cLCSSecTunStaticNetworkEntry	1.3.6.1.4.1.9.9.838.1.4.1.10.1		not-accessible	Each entry in this table represents the attributes of secure tunnel network.
cLCSSecTunStaticNetworkTable	1.3.6.1.4.1.9.9.838.1.4.1.10		not-accessible	This table represents static Networks configured for Secure tunneling of it's traffic. This is the explicit way of configuration to send traffic of a given network over TLS secure tunnel
INT clCSSecTunTLSClientProcState	1.3.6.1.4.1.9.9.838.1.4.2.6	INTEGER	read-only	This object represents the state of the TLS Client process. TLS Client process is responsible in establishing TLS tunnel with the Gateway. It encapsulates the data packets before sending them to the Gateway over the tunnel. tlscProcDown(1): This value indicates that the process is down, tlscProcInProg(2): This value indicates that the process is just coming up and is in-progress. tlscProcUp(3): This value indicates that the process is up and running. tlscProcReStart(4): This value indicates that the process is in restart.
STR clCSSecTunTlsGwFqdn	1.3.6.1.4.1.9.9.838.1.4.1.2	SnmpAdminString	read-write	This object specifies the Fully Qualified Domain Name(FQDN) of the TLS Gateway with which secure tunnel is established.
IP clCSSecTunTlsGwIpAddr	1.3.6.1.4.1.9.9.838.1.4.1.4	InetAddress	read-write	This object specifies the IP address of the TLS Gateway with which secure tunnel is established.
IPt clCSSecTunTlsGwIpAddrInUseType	1.3.6.1.4.1.9.9.838.1.4.2.2	InetAddressType	read-only	This objects represents the TLS Gateway IP address type
IPt clCSSecTunTlsGwIpAddrType	1.3.6.1.4.1.9.9.838.1.4.1.3	InetAddressType	read-write	This object specifies the TLS Gateway IP address type.
IP clCSSecTunTlsGwIpInUseAddr	1.3.6.1.4.1.9.9.838.1.4.2.3	InetAddress	read-only	This object represents the IP address of the TLS Gateway which is currently in-use. User can configure FQDN or IP address for TLS Gateway. The preference is to resolve the FQDN and get the IP address, if that fails it will use the statically configured IP address.
INE clCSSecTunTlsGwPort	1.3.6.1.4.1.9.9.838.1.4.1.5	InetPortNumber	read-write	This object specifies the TLS Gateway port number.
clCSTelemetryConfigGroup	1.3.6.1.4.1.9.9.838.2.2.16			This collection of objects represent the configuration of telemetry filter channels.
cLCSTelemetryFCEntry	1.3.6.1.4.1.9.9.838.1.7.1.1		not-accessible	Each entry in this table represents the attributes needed for managing a filter channel.
STR clCSTelemetryFCFilter	1.3.6.1.4.1.9.9.838.1.7.2.1.1	SnmpAdminString	not-accessible	This object specifies the filters of a given filter channel. Filter channel extracts the data from parent channel based on the provided filters.
U32 clCSTelemetryFCFilterCount	1.3.6.1.4.1.9.9.838.1.7.1.1.4	Unsigned32	read-only	This object represents the number of filters configured on this filter channel.
cLCSTelemetryFCFilterEntry	1.3.6.1.4.1.9.9.838.1.7.2.1		not-accessible	Each entry in this table represents the attributes needed for managing the filters of a perticular filter channel
ROW clCSTelemetryFCFilterRowStatus	1.3.6.1.4.1.9.9.838.1.7.2.1.2	RowStatus	read-create	This is the status column for this row and is used to create and delete specific instances of rows in this table.
cLCSTelemetryFCFilterTable	1.3.6.1.4.1.9.9.838.1.7.2		not-accessible	This table represents all the filters configured on the filter channels.
STR clCSTelemetryFCName	1.3.6.1.4.1.9.9.838.1.7.1.1.1	SnmpAdminString	not-accessible	This object specifies the name of filter channel.
STR clCSTelemetryFCParent	1.3.6.1.4.1.9.9.838.1.7.1.1.2	SnmpAdminString	read-create	This object specifies the name of parent channel to which the filter channel belongs. Parent channel should be a static channel.
ROW clCSTelemetryFCRowStatus	1.3.6.1.4.1.9.9.838.1.7.1.1.5	RowStatus	read-create	This is the status column for this row and is used to create and delete specific instances of rows in this table.
INT clCSTelemetryFCSubStatus	1.3.6.1.4.1.9.9.838.1.7.1.1.3	INTEGER	read-only	This object represents whether the filter channel is subscribed or not. none(1): This value indicates that filter channel is not subscribed. assurance(2): This value indicates that filter channel is subscribed to assurance. webhook(3): This value indicates that filter channel is subscribed to webhook.
cLCSTelemetryFCTable	1.3.6.1.4.1.9.9.838.1.7.1		not-accessible	This table represents telemetry filter channel related configurations. Filter channel is a user created channel which uses filters added by user to externalize the data.
STR clCSWebhookAuthToken	1.3.6.1.4.1.9.9.838.1.5.2	SnmpAdminString	read-write	This object specifies the authentication token of the webhook server.
cLCSWebhookChannelEntry	1.3.6.1.4.1.9.9.838.1.6.1.1		not-accessible	Each entry in this table represents and includes the attributes needed for subscribing a webhook channel
STR clCSWebhookChannelName	1.3.6.1.4.1.9.9.838.1.6.1.1.1	SnmpAdminString	not-accessible	This object specifies the webhook channel name to subscribe/unsubscribe/set sync interval/set on-change mode based on the value of respective objects. 'ap': This value indicates aps channel. 'ap-fra': This value indicates ap-fra channel. 'ap-capwap': This value indicates ap-capwap channel. 'ap-channel': This value indicates ap-channel channel. 'ap-fra-sensor': This value indicates ap-fra-sensor channel. 'ap-interface-stats': This value indicates ap-interface-stats channel. 'ap-inventory': This value indicates ap-inventory channel. 'ap-network-stats': This value indicates ap-network-stats channel. 'ap-reports': This value indicates ap-reports channel. 'ap-rf': This value indicates ap-rf channel. 'ap-rf-neighbors': This value indicates ap-rf-neighbors channel. 'ap-rf-stats': This value indicates ap-rf-stats channel. 'ap-events': This value indicates ap-events channel. 'ap-system': This value indicates ap-system channel. 'cdp': This value indicates cdp channel. 'client-app-stats': This value indicates client-app-stats channel. 'client-mobility-stats': This value indicates client-mobility-stats channel. 'client-network-stats': This value indicates client-network-stats channel. 'client-policies': This value indicates client-policies channel. 'client-reports': This value indicates client-reports channel. 'client-rf-measurements': This value indicates client-rf-measurements channel. 'client-traffic-measurements': This value indicates client-traffic-measurements channel. 'client-wireless-stats': This value indicates client-wireless-stats channel. 'client-dns-reports': This value indicates client-dns-reports channel. 'client-events': This value indicates client-events channel. 'client': This value indicates clients channel. 'dhcp': This value indicates dhcp channel. 'eogre': This value indicates eogre channel. 'fabric': This value indicates fabric channel. 'interferers': This value indicates interferers channel. 'licensing': This value indicates licensing channel. 'mobility': This value indicates mobility channel. 'ndp': This value indicates ndp channel. 'radius-events': This value indicates radius-events channel. 'radius': This value indicates radius channel. 'redundancy-events': This value indicates redundancy-events channel. 'redundancy': This value indicates redundancy channel. 'rogues': This value indicates rogues channel. 'system-core-stats': This value indicates system-core-stats channel. 'system-dataplane-stats': This value indicates system-dataplane-stats channel. 'system-general-stats': This value indicates system-general-stats channel. 'system-port-stats': This value indicates system-port-stats channel. 'system-process-stats': This value indicates system-process-stats channel. 'tacacs': This value indicates tacacs channel.
T/F clCSWebhookChannelOnChangeMode	1.3.6.1.4.1.9.9.838.1.6.1.1.3	TruthValue	read-create	This object specifies the value of on-change mode of a webhook server channel. A value of 'true' indicates that only changed data will be synced. A value of 'false' indicates that all the data present in DB will be synced.
ROW clCSWebhookChannelRowStatus	1.3.6.1.4.1.9.9.838.1.6.1.1.4	RowStatus	read-create	This is the status column for this row and is used to create and delete specific instances of rows in this table.
INT clCSWebhookChannelSyncInterval	1.3.6.1.4.1.9.9.838.1.6.1.1.2	INTEGER	read-create	This object specifies the webhook channel sync interval. fifteen(15): This value indicates 15 sec interval thirty(30): This value indicates 30 sec interval sixty(60): This value indicates 60 sec interval threehundred(300): This value indicates 300 sec interval.
cLCSWebhookChannelTable	1.3.6.1.4.1.9.9.838.1.6.1		not-accessible	This table represents Webhook subscription channel related configurations.
clCSWebhookConfigGroup	1.3.6.1.4.1.9.9.838.2.2.13			This collection of objects represent the configuration of a webhook server to receive telemetry data from the controller clCSWebhookConfigGroup object is superseded by clCSWebhookConfigGroupRev1.
clCSWebhookConfigGroupRev1	1.3.6.1.4.1.9.9.838.2.2.14			This collection of objects represent the configuration of a webhook server to receive telemetry data from the controller
T/F clCSWebhookEnable	1.3.6.1.4.1.9.9.838.1.5.3	TruthValue	read-write	This object specifies the state of the controller telemetry data externalization to the webhook server. A value of 'true' indicates that externalization to the webhook server is enabled. A value of 'false' indicates that externalization to the webhook server is disabled
clCSWebhookGlobalObjects	1.3.6.1.4.1.9.9.838.1.5
T/F clCSWebhookOnchangeEnable	1.3.6.1.4.1.9.9.838.1.5.4	TruthValue	read-write	This object specifies the type of telemetry data that will be externalized. The type can be bulk or onChange. With onChange enabled, the server will receive only the change in data. With onChange disabled, the server will receive the entire dataset(bulk) A value of 'true' indicates that onchange is enabled. A value of 'false' indicates that onChange is disabled. clCSWebhookOnchangeEnable object is superseded by clCSWebhookChannelOnChangeMode.
T/F cLCSWebhookResetSubscriptions	1.3.6.1.4.1.9.9.838.1.5.8	TruthValue	read-write	This object specfies the option to reset webhook channel subscriptions to defaults. A value of 'true' indicates that subscriptions are reset. A value of 'false' indicates that subscriptions are not reset. User can only set the value 'true'. Read on this object always returns the value 'false'.
INT clCSWebhookSubscriptionAction	1.3.6.1.4.1.9.9.838.1.5.6	INTEGER	read-write	This object specifies the possible modifications to the data content in the telemetry stream sent to the webhook server. add - will add the channel to the telemetry stream remove - will remove the channel from the telemetry stream clCSWebhookSubscriptionAction object is superseded by clCSWebhookChannelRowStatus.
BIT clCSWebhookSubscriptionTopic	1.3.6.1.4.1.9.9.838.1.5.7	Bits	read-write	This object specifies the channels that can be modified in the telemetry data stream that is sent to the webhook server. The user can configure a channel from the given enums system(0) - Configures the system channel network(1) - Configures the network channel client(2) - Configures the client channel ap(3) - Configures the AP channel rogue(4) - Configures the rogue channel interferer(5) - Configures the interferer channel mapserver(6) - Configures the mapserver channel clCSWebhookSubscriptionTopic object is superseded by clCSWebhookChannelName.
INT clCSWebhookSyncInterval	1.3.6.1.4.1.9.9.838.1.5.5	INTEGER	read-write	This object specifies the frequency at which the telemetry data would be received at the webhook server. A value of fixed will provide data once in every 5 minutes A value of adaptive will provide data once in 30 seconds clCSWebhookSyncInterval object is superseded by clCSWebhookChannelSyncInterval .
clCSWebhookTableObjects	1.3.6.1.4.1.9.9.838.1.6
STR clCSWebhookUrl	1.3.6.1.4.1.9.9.838.1.5.1	SnmpAdminString	read-write	This object specifies the URL for the webhook server
IP cLSCSecTunNetworkIPAddress	1.3.6.1.4.1.9.9.838.1.4.1.10.1.2	InetAddress	not-accessible	This object specifies the IP address or subnet of the network to be added for secure tunneling
IPt cLSCSecTunNetworkIPAddressType	1.3.6.1.4.1.9.9.838.1.4.1.10.1.1	InetAddressType	not-accessible	This object specifies the IP address type of cLSCSecTunNetworkIPAddress.
IP cLSCSecTunNetworkIPNetmask	1.3.6.1.4.1.9.9.838.1.4.1.10.1.4	InetAddress	not-accessible	This object specifies the IP netmask of the network added for secure tunneling.
IPt cLSCSecTunNetworkIPNetmaskType	1.3.6.1.4.1.9.9.838.1.4.1.10.1.3	InetAddressType	not-accessible	This object specifies IP netmask type of cLSCSecTunNetworkIPNetmask.
ROW cLSCSecTunNetworkRowStatus	1.3.6.1.4.1.9.9.838.1.4.1.10.1.5	RowStatus	read-create	This object specifies status column for this row and used to create and delete specific instances of rows in this table.
IP cLSCSecTunRouteIPAddress	1.3.6.1.4.1.9.9.838.1.4.2.7.1.2	InetAddress	not-accessible	This object represents the IP address or subnet of the route to be added for secure tunneling
IPt cLSCSecTunRouteIPAddressType	1.3.6.1.4.1.9.9.838.1.4.2.7.1.1	InetAddressType	not-accessible	This object represents the IP address type of cLSCSecTunRouteIPAddress.
IP cLSCSecTunRouteNetmask	1.3.6.1.4.1.9.9.838.1.4.2.7.1.4	InetAddress	not-accessible	This object represents the IP netmask of the route to be added for secure tunneling.
IPt cLSCSecTunRouteNetmaskType	1.3.6.1.4.1.9.9.838.1.4.2.7.1.3	InetAddressType	not-accessible	This object represents IP netmask type of cLSCSecTunNetworkIPNetmask.
U32 cLSCSecTunRouteTableRowStatus	1.3.6.1.4.1.9.9.838.1.4.2.7.1.5	Unsigned32	read-only	This object specifies the entry status of this conceptual row.

RFC description

Cisco lightweight access point protocol MIB extension for cloud-based services; manages WLAN controller cloud integration and policies.

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-LWAPP-CLOUD-SERVICES-MIB

What Is CISCO-LWAPP-CLOUD-SERVICES-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description