CIE1000-ICFG-MIB

All MIBs › CIE1000-ICFG-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2016-05-09

Category: Cisco Devices

Description: Manages configuration file save, load, and factory-reset operations on Cisco IE1000 industrial Ethernet switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIE1000-ICFG-MIB?

CIE1000-ICFG-MIB is a Cisco private MIB for the IE1000 series industrial Ethernet switches, providing a private version of ICFG (Cisco's image/configuration file management framework). It exposes configuration-management data: statistics on the number and size of stored configuration files, flash memory total and free space, a per-file table with name/size/modification time, and the status of file-copy or config-save operations. In monitoring terms it is primarily a software/configuration state module -- it lets an operator confirm flash storage capacity, verify recent configuration backups, and check whether a config copy or factory-reset job completed successfully. It builds on Cisco's broader ICFG/flash-management conventions for file storage rather than a standard IETF MIB. It is typically deployed on ruggedized IE1000 switches in industrial/factory-floor network environments where remote configuration management and flash health matter. Engineers can download the CIE1000-ICFG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIE1000-ICFG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IE1000 industrial Ethernet switch

Monitoring Examples

An admin would poll cie1000IcfgStatusFileStatisticsFlashFreeBytes and cie1000IcfgStatusFileStatisticsFlashSizeBytes to watch for flash space running low, and walk cie1000IcfgStatusFileTable/cie1000IcfgStatusFileEntry (indexed by cie1000IcfgStatusFileFileNo) to confirm cie1000IcfgStatusFileFileName, cie1000IcfgStatusFileBytes, and cie1000IcfgStatusFileModifiedTime for the running/startup config files. Checking cie1000IcfgStatusCopyConfigStatus after a scheduled backup job would reveal whether a config-save or config-load operation succeeded or failed. A shrinking cie1000IcfgStatusFileStatisticsFlashFreeBytes value over time could predict an impending out-of-space condition for configuration backups.

What Can Be Monitored

number of configuration files stored
total/free flash bytes
individual config file name/size/modified time
config copy operation status

Imported Objects

From CIE1000-TC

CIE1000DisplayString

From CISCO-IE1000-MIB

cie1000SwitchMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cie1000IcfgMib	1.3.6.1.4.1.9.9.832.1.101			This is a private version of ICFG
cie1000IcfgMibObjects	1.3.6.1.4.1.9.9.832.1.101.1
cie1000IcfgStatus	1.3.6.1.4.1.9.9.832.1.101.1.3
cie1000IcfgStatusFileStatistics	1.3.6.1.4.1.9.9.832.1.101.1.3.1
U32 cie1000IcfgStatusFileStatisticsNumberOfFiles	1.3.6.1.4.1.9.9.832.1.101.1.3.1.1	Unsigned32	read-only	Number of files in flash.
U32 cie1000IcfgStatusFileStatisticsTotalBytes	1.3.6.1.4.1.9.9.832.1.101.1.3.1.2	Unsigned32	read-only	Total number of bytes used by all files in flash.
U32 cie1000IcfgStatusFileStatisticsFlashSizeBytes	1.3.6.1.4.1.9.9.832.1.101.1.3.1.3	Unsigned32	read-only	Flash file system size in bytes.
U32 cie1000IcfgStatusFileStatisticsFlashFreeBytes	1.3.6.1.4.1.9.9.832.1.101.1.3.1.4	Unsigned32	read-only	Flash file system number of free bytes.
cie1000IcfgStatusFileTable	1.3.6.1.4.1.9.9.832.1.101.1.3.2		not-accessible	This is a table of status of files in flash.
cie1000IcfgStatusFileEntry	1.3.6.1.4.1.9.9.832.1.101.1.3.2.1		not-accessible	Each entry has a set of file status.
I32 cie1000IcfgStatusFileFileNo	1.3.6.1.4.1.9.9.832.1.101.1.3.2.1.1	Integer32	accessible-for-notify	The number of File. The number starts from 1.
STR cie1000IcfgStatusFileFileName	1.3.6.1.4.1.9.9.832.1.101.1.3.2.1.2	CIE1000DisplayString	read-only	File name.
U32 cie1000IcfgStatusFileBytes	1.3.6.1.4.1.9.9.832.1.101.1.3.2.1.3	Unsigned32	read-only	Number of bytes of the file.
STR cie1000IcfgStatusFileModifiedTime	1.3.6.1.4.1.9.9.832.1.101.1.3.2.1.4	CIE1000DisplayString	read-only	Last modified time of the file.
STR cie1000IcfgStatusFileAttribute	1.3.6.1.4.1.9.9.832.1.101.1.3.2.1.5	CIE1000DisplayString	read-only	File attribute in the format of 'rw'. 'r' presents readable while 'w' presents writable.
cie1000IcfgStatusCopyConfig	1.3.6.1.4.1.9.9.832.1.101.1.3.3
CIE cie1000IcfgStatusCopyConfigStatus	1.3.6.1.4.1.9.9.832.1.101.1.3.3.1	CIE1000IcfgConfigStatus	read-only	The status indicates the status of current copy operation. none(0) means no copy operation. success(1) means copy operation is successful. inProgress(2) means current copy operation is in progress. errOtherInProcessing(3) means copy operation is failed due to other in processing. errNoSuchFile(4) means copy operation is failed due to file not existing. errSameSrcDst(5) means copy operation is failed due to the source and destination are the same. errPermissionDenied(6) means copy operation is failed due to the destination is not permitted to modify. errLoadSrc(7) means copy operation is failed due to the error to load source file. errSaveDst(8) means copy operation is failed due to the error to save or commit destination.
cie1000IcfgControl	1.3.6.1.4.1.9.9.832.1.101.1.4
cie1000IcfgControlGlobals	1.3.6.1.4.1.9.9.832.1.101.1.4.1
CIE cie1000IcfgControlGlobalsReloadDefault	1.3.6.1.4.1.9.9.832.1.101.1.4.1.1	CIE1000IcfgReloadDefault	read-write	Reset system to default. none(0) is to do nothing. default(1) is to reset the whole system to default. defaultKeepIp(2) is to reset system to default, but keep IP address of VLAN 1.
STR cie1000IcfgControlGlobalsDeleteFile	1.3.6.1.4.1.9.9.832.1.101.1.4.1.2	CIE1000DisplayString	read-write	Delete file in flash. The format is flash:filename. Where 'default-config' is read-only and not allowed to be deleted.
cie1000IcfgControlCopyConfig	1.3.6.1.4.1.9.9.832.1.101.1.4.2
T/F cie1000IcfgControlCopyConfigCopy	1.3.6.1.4.1.9.9.832.1.101.1.4.2.1	TruthValue	read-write	Action to do copy or not. true is to do the copy operation. false is to do nothing
CIE cie1000IcfgControlCopyConfigSourceConfigType	1.3.6.1.4.1.9.9.832.1.101.1.4.2.2	CIE1000IcfgConfigType	read-write	Source configuration type. none(0) means no configuration file. runningConfig(1) means running configuration. startupConfig(2) means startup configuration file in flash. configFile(3) is the configuration file specified in SourceConfigFile.
STR cie1000IcfgControlCopyConfigSourceConfigFile	1.3.6.1.4.1.9.9.832.1.101.1.4.2.3	CIE1000DisplayString	read-write	Source configuration file. If the configuration file is in flash then the format is flash:'filename'. If the configuration file is from tftp then the format is tftp://server[:port]/path-to-file.
CIE cie1000IcfgControlCopyConfigDestinationConfigType	1.3.6.1.4.1.9.9.832.1.101.1.4.2.4	CIE1000IcfgConfigType	read-write	Source configuration type. none(0) means no configuration file. runningConfig(1) means running configuration. startupConfig(2) means startup configuration file in flash. configFile(3) is the configuration file specified in DestinationConfigFile.
STR cie1000IcfgControlCopyConfigDestinationConfigFile	1.3.6.1.4.1.9.9.832.1.101.1.4.2.5	CIE1000DisplayString	read-write	Destination configuration file. If the configuration file is in flash then the format is flash:filename. If the configuration file is from tftp then the format is tftp://server[:port]/filename_with_path. Where 'default-config' is read-only and not allowed to be deleted.
T/F cie1000IcfgControlCopyConfigMerge	1.3.6.1.4.1.9.9.832.1.101.1.4.2.6	TruthValue	read-write	This flag works only if DestinationConfigType is runningConfig(1). true is to merge the source configuration into the current running configuration. false is to replace the current running configuration with the source configuration.
cie1000IcfgMibConformance	1.3.6.1.4.1.9.9.832.1.101.2
cie1000IcfgMibCompliances	1.3.6.1.4.1.9.9.832.1.101.2.1
cie1000IcfgMibCompliance	1.3.6.1.4.1.9.9.832.1.101.2.1.1			The compliance statement for the implementation.
cie1000IcfgMibGroups	1.3.6.1.4.1.9.9.832.1.101.2.2
cie1000IcfgStatusFileStatisticsInfoGroup	1.3.6.1.4.1.9.9.832.1.101.2.2.1			A collection of objects.
cie1000IcfgStatusFileTableInfoGroup	1.3.6.1.4.1.9.9.832.1.101.2.2.2			A collection of objects.
cie1000IcfgStatusCopyConfigInfoGroup	1.3.6.1.4.1.9.9.832.1.101.2.2.3			A collection of objects.
cie1000IcfgControlGlobalsInfoGroup	1.3.6.1.4.1.9.9.832.1.101.2.2.4			A collection of objects.
cie1000IcfgControlCopyConfigInfoGroup	1.3.6.1.4.1.9.9.832.1.101.2.2.5			A collection of objects.

RFC description

Vitesse/Microsemi vendor management MIB for the CIE1000 switch series covering integrated configuration.

Start monitoring Cisco IE1000 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIE1000-ICFG-MIB

What Is CIE1000-ICFG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description