All MIBs › CISCO-DOT11-ASSOCIATION-MIB
Organization: Cisco Systems Inc.
Last Updated: 2007-01-05
Category: Cisco Devices, Wireless and WLAN
Description: Provides network management information on IEEE 802.11 wireless device association management and per-client data packet forwarding configuration and statistics.
IPNetwork Monitor uses several OIDs from this MIB in network discovery and polling the applicable devices. Start monitoring CISCO-DOT11-ASSOCIATION-MIB with a free 30-day trial of IPNetwork Monitor.
What Is CISCO-DOT11-ASSOCIATION-MIB?
CISCO-DOT11-ASSOCIATION-MIB is a Cisco vendor extension to the standard IEEE802dot11-MIB that provides detailed management information on 802.11 wireless client association, data forwarding, and per-client statistics on Cisco wireless access points and bridges. It exposes data on active wireless devices (clients, bridges, repeaters) associated to an AP, along with association statistics such as counts of associated and authenticated clients, and roaming events (roamed-in and roamed-away). Its monitoring focus is wireless connectivity/service status rather than hardware sensors: the active-device and association-statistics tables let an admin track how many clients are connected, detect abnormal roaming churn, or spot authentication failures, which is central to diagnosing Wi-Fi service problems. It explicitly extends the IEEE Std 802.11-1999 IEEE802dot11-MIB, making that standard MIB a direct dependency. It is typically deployed on Cisco Aironet-family access points and wireless bridges in enterprise WLAN deployments, and administrators can download the CISCO-DOT11-ASSOCIATION-MIB file to load it into their MIB browser for client-association monitoring.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-DOT11-ASSOCIATION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco Aironet-family wireless access points and bridges
Monitoring Examples
An admin would poll cDot11ActiveDevicesTable/cDot11ActiveDevicesEntry to read cDot11ActiveWirelessClients, cDot11ActiveBridges, and cDot11ActiveRepeaters for a real-time count of associated devices, then check cDot11AssociationStatsTable fields cDot11AssStatsAssociated, cDot11AssStatsAuthenticated, cDot11AssStatsRoamedIn, and cDot11AssStatsRoamedAway. A high and rising cDot11AssStatsRoamedAway count relative to cDot11AssStatsAssociated would reveal excessive client roaming/instability on that access point, suggesting RF interference or coverage overlap issues.
What Can Be Monitored
- count of associated/authenticated wireless clients
- active bridges and repeaters
- client roam-in and roam-away events
- per-client association status
This MIB depends on
Related MIBs
Imported Objects
From CISCO-DOT11-IF-MIB
| CDot11IfCipherType | |
| CDot11IfVlanIdOrZero | |
| cd11IfAuxSsid | OBJECT-TYPE |
From CISCO-SMI
| ciscoMgmt | OBJECT-IDENTITY |
From IF-MIB
| InterfaceIndex | |
| ifIndex | OBJECT-TYPE |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Gauge32 | |
| Integer32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| MacAddress | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using cDot11AssStatsAssociated OID:
Select a Cisco Aironet-family wireless access point or bridge as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cDot11AssStatsAssociated into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object counts the number of stations associated with this device on this interface since device re-started. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in client), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| C32 cd11IfCipherCcmpReplaysDiscarded | 1.3.6.1.4.1.9.9.273.1.1.4.1.5 | Counter32 | read-only | This object counts the number of received unicast fragments discarded by replay mechanism on this interface since device re-started. |
| MAC cd11IfCipherMicFailClientAddress | 1.3.6.1.4.1.9.9.273.1.1.4.1.1 | MacAddress | read-only | This is MAC address of the client attached to this radio interface that caused the most recent MIC failure. |
| cd11IfCipherStatsEntry | 1.3.6.1.4.1.9.9.273.1.1.4.1 | not-accessible | Each entry provides cipher related statistics collected on each of the IEEE 802.11 interfaces. | |
| cd11IfCipherStatsTable | 1.3.6.1.4.1.9.9.273.1.1.4 | not-accessible | This table includes AES, TKIP, and security tempering attempts statistics collected by the IEEE 802.11 radio interfaces and system management. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71). | |
| C32 cd11IfCipherTkipCounterMeasInvok | 1.3.6.1.4.1.9.9.273.1.1.4.1.4 | Counter32 | read-only | This object counts the number of TKIP Counter Measures invoked on this interface since device re-started. |
| C32 cd11IfCipherTkipLocalMicFailures | 1.3.6.1.4.1.9.9.273.1.1.4.1.2 | Counter32 | read-only | This object counts the number of MIC failures encountered on this radio interface since device re-started. |
| C32 cd11IfCipherTkipRemotMicFailures | 1.3.6.1.4.1.9.9.273.1.1.4.1.3 | Counter32 | read-only | This object counts the number of MIC failures reported by clients on this radio interface since device re-started. |
| C32 cd11IfCipherTkipReplaysDetected | 1.3.6.1.4.1.9.9.273.1.1.4.1.6 | Counter32 | read-only | This object counts the number of TKIP replay errors detected on this interface since device re-started. |
| G32 cDot11ActiveBridges | 1.3.6.1.4.1.9.9.273.1.1.2.1.2 | Gauge32 | read-only | This is the number of bridges currently associating with this device on this interface. |
| cDot11ActiveDevicesEntry | 1.3.6.1.4.1.9.9.273.1.1.2.1 | not-accessible | An entry represents a currently active device associated with this device. These active devices include: wireless clients, repeaters, and bridges. | |
| cDot11ActiveDevicesTable | 1.3.6.1.4.1.9.9.273.1.1.2 | not-accessible | This table contains the list of active devices currently associated with this device on each of the IEEE 802.11 interfaces. This table has a sparse dependent relationship on the ifTable. | |
| G32 cDot11ActiveRepeaters | 1.3.6.1.4.1.9.9.273.1.1.2.1.3 | Gauge32 | read-only | This is the number of repeaters currently associating with this device on this interface. |
| G32 cDot11ActiveWirelessClients | 1.3.6.1.4.1.9.9.273.1.1.2.1.1 | Gauge32 | read-only | This is the number of wireless clients currently associating with this device on this interface. |
| cDot11AssociationGlobal | 1.3.6.1.4.1.9.9.273.1.1 | |||
| cDot11AssociationStatsEntry | 1.3.6.1.4.1.9.9.273.1.1.3.1 | not-accessible | Each entry provides association statistics of various devices interacting with this device on each of the IEEE 802.11 interfaces. | |
| cDot11AssociationStatsTable | 1.3.6.1.4.1.9.9.273.1.1.3 | not-accessible | This table contains statistics for various devices associated with this device on each of the IEEE 802.11 interfaces since it was last re-started. These devices include: wireless clients, repeaters, and bridges. This table has a sparse dependent relationship on the ifTable. | |
| C32 cDot11AssStatsAssociatedEx | 1.3.6.1.4.1.9.9.273.1.1.3.1.1 | Counter32 | read-only | This object counts the number of stations associated with this device on this interface since device re-started. |
| C32 cDot11AssStatsAuthenticated | 1.3.6.1.4.1.9.9.273.1.1.3.1.2 | Counter32 | read-only | This object counts the number of stations authenticated with this device on this interface since device re-started. |
| C32 cDot11AssStatsDeauthenticated | 1.3.6.1.4.1.9.9.273.1.1.3.1.5 | Counter32 | read-only | This object counts the number of stations deauthenticated with this device on this interface since device re-started. |
| C32 cDot11AssStatsDisassociated | 1.3.6.1.4.1.9.9.273.1.1.3.1.6 | Counter32 | read-only | This object counts the number of stations disassociated with this device on this interface since device re-started. |
| C32 cDot11AssStatsRoamedAway | 1.3.6.1.4.1.9.9.273.1.1.3.1.4 | Counter32 | read-only | This object counts the number of stations roamed away from this device on this interface since device re-started. |
| C32 cDot11AssStatsRoamedIn | 1.3.6.1.4.1.9.9.273.1.1.3.1.3 | Counter32 | read-only | This object counts the number of stations roamed from another device to this device on this interface since device re-started. |
| CDO cDot11ClientAdditionalAuthen | 1.3.6.1.4.1.9.9.273.1.2.1.1.20 | CDot11AdditionalAuthenMethod | read-only | These are the additional authentications that were performed after IEEE 802.11 Open System or Shared Key authentication had completed. If none of the bits is set, no additional MAC address or EAP authentication was performed during association. |
| MAC cDot11ClientAddress | 1.3.6.1.4.1.9.9.273.1.2.1.1.1 | MacAddress | not-accessible | The MAC address of the client. |
| G32 cDot11ClientAgingLeft | 1.3.6.1.4.1.9.9.273.1.3.1.1.5 | Gauge32 | read-only | The number of seconds of aging time left for this client. |
| U32 cDot11ClientAid | 1.3.6.1.4.1.9.9.273.1.2.1.1.10 | Unsigned32 | read-only | This is the association identification number of clients or multicast addresses associating with this device. For a multicast address with clients, the cDot11ClientAid is '0'. For the uplink association from this device to its parent access point, the cDot11ClientAid is always '1'. For any multicast address with no client currently known to be associated with this device, the cDot11ClientAid is '2008'. |
| INT cDot11ClientAssociationState | 1.3.6.1.4.1.9.9.273.1.2.1.1.14 | INTEGER | read-only | This object indicates the state of the authentication and association process between the two parties: initial(1) - association request received from client, authenNotAssociated(2) - 802.11 authenticated but not 802.11 associated, assocAndAuthenticated(3) - 802.11 associated and 802.1x authenticated, assocNotAnuthenticated(4) - 802.11 associated but 802.1x not authenticated. |
| CDO cDot11ClientAuthenAlgorithm | 1.3.6.1.4.1.9.9.273.1.2.1.1.19 | CDot11AuthenticationMethod | read-only | This is the IEEE 802.11 authentication methods performed between the wireless station and this client during association. |
| C32 cDot11ClientBytesReceived | 1.3.6.1.4.1.9.9.273.1.3.1.1.7 | Counter32 | read-only | The number of bytes received from this client. |
| C32 cDot11ClientBytesSent | 1.3.6.1.4.1.9.9.273.1.3.1.1.9 | Counter32 | read-only | The number of bytes sent to this client. |
| cDot11ClientConfigInfoEntry | 1.3.6.1.4.1.9.9.273.1.2.1.1 | not-accessible | Each entry is the device specification of a client of this device on the IEEE 802.11 radio interfaces. Clients are grouped according to the SSIDs of the interfaces they use for associations and the MAC address of their parent devices if the clients are repeat APs. | |
| cDot11ClientConfigInfoTable | 1.3.6.1.4.1.9.9.273.1.2.1 | not-accessible | This table contains configuration information of client devices. Entries on this table are created by the device radio driver when clients establish association with the device. Entries are removed when clients disassociate with the device. These clients include: wireless clients, repeaters, and bridges. On Infrastructure clients like repeaters, non-root bridges and workgroup bridges, this table also has an entry for the parent device they are associated to. | |
| cDot11ClientConfiguration | 1.3.6.1.4.1.9.9.273.1.2 | |||
| OCT cDot11ClientCurrentTxRateSet | 1.3.6.1.4.1.9.9.273.1.3.1.1.1 | OCTET STRING | read-only | This is the set current transmit data rates for this client. Each client can transmit data at all of its configured rates. There is a maximum of 126 it can configure to transmit. Each octet contains an integer value representing one of these 126 rates it is currently transmitting. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames. |
| OCT cDot11ClientDataRateSet | 1.3.6.1.4.1.9.9.273.1.2.1.1.11 | OCTET STRING | read-only | This is the set of data rates at which this client can transmit and receive data. Each client can support up to 126 rates. Each octet contains an integer value representing one of these 126 rates. Each rate shall be within the range from 2 to 127, corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the client desires to synchronize is suitable. It is also used when starting a BSS. |
| OID cDot11ClientDevObjectID | 1.3.6.1.4.1.9.9.273.1.2.1.1.25 | OBJECT IDENTIFIER | read-only | This object indicates the authoritative identification of the associated 802.11 client as assigned by the respective vendor. A value of '0.0' shall be populated if no such identification exists for this 802.11 client. |
| CDO cDot11ClientDevType | 1.3.6.1.4.1.9.9.273.1.2.1.1.4 | CDot11ClientDevType | read-only | The device type of the client. |
| CDO cDot11ClientDot1xAuthenAlgorithm | 1.3.6.1.4.1.9.9.273.1.2.1.1.21 | CDot11Dot1xAuthenMethod | read-only | This the IEEE 802.1x authentication methods performed between this wireless client and the authentication server. If none of the bits is set, no IEEE 802.1x authentication was performed during association. |
| C32 cDot11ClientDuplicates | 1.3.6.1.4.1.9.9.273.1.3.1.1.10 | Counter32 | read-only | This counter increments when a packet for this client is received and the Sequence Control field in the packet header indicates the packet is a duplicate. |
| IP cDot11ClientIpAddress | 1.3.6.1.4.1.9.9.273.1.2.1.1.16 | InetAddress | read-only | This is the static or DHCP assigned IP address of the client. |
| IPt cDot11ClientIpAddressType | 1.3.6.1.4.1.9.9.273.1.2.1.1.15 | InetAddressType | read-only | This is the IP address type of the cDot11ClientIpAddress. |
| CDO cDot11ClientKeyManagement | 1.3.6.1.4.1.9.9.273.1.2.1.1.22 | CDot11KeyManagementMethod | read-only | This is the encryption key management methods employed by this client for IEEE 802.11 wireless frame encryption. If none of the bits is set, no key management method is employed. |
| T/F cDot11ClientMicEnabled | 1.3.6.1.4.1.9.9.273.1.2.1.1.8 | TruthValue | read-only | When this object is 'true', it indicates that the MIC is enabled for this client. The default value of this object is 'false'. |
| C32 cDot11ClientMicErrors | 1.3.6.1.4.1.9.9.273.1.3.1.1.14 | Counter32 | read-only | This is the number of MIC errors for this client. |
| C32 cDot11ClientMicMissingFrames | 1.3.6.1.4.1.9.9.273.1.3.1.1.15 | Counter32 | read-only | This is the number of missing MIC packets for this client. |
| C32 cDot11ClientMsduFails | 1.3.6.1.4.1.9.9.273.1.3.1.1.12 | Counter32 | read-only | This counter increments when an MSDU is not transmitted successfully for this client due to the number of transmit attempts exceeding some limit. |
| C32 cDot11ClientMsduRetries | 1.3.6.1.4.1.9.9.273.1.3.1.1.11 | Counter32 | read-only | This counter increments when an MSDU is successfully transmitted after one or more retransmissions for this client. |
| CDO cDot11ClientMulticastCipher | 1.3.6.1.4.1.9.9.273.1.2.1.1.24 | CDot11IfCipherType | read-only | These are all the possible multi-cast data frame cipher encryption type combinations currently supported on this IEEE 802.11 client. If none of the bits is set, the client is not performing any multi-cast data frame encryption. aesccm WPA AES CCMP encryption, ckip Cisco Per packet key hashing, cmic Cisco MMH MIC, ckip|cmic Cisco Per packet key hashing and Cisco MMH MIC, tkip WPA Temporal Key encryption, wep128 128-bit WEP key, wep40 40-bit WEP key. tkip|wep128 WPA Temporal Key and 128-bit WEP, tkip|wep40 WPA Temporal Key and 40-bit WEP. |
| STR cDot11ClientName | 1.3.6.1.4.1.9.9.273.1.2.1.1.13 | SnmpAdminString | read-only | This is the Cisco IOS device hostname if the other end of the association is a bridge, access point, or repeater. If it is a wireless client, this is the configured client name. |
| CDO cDot11ClientNewKeyManagement | 1.3.6.1.4.1.9.9.273.1.2.1.1.26 | CDot11NewKeyManagementMethod | read-only | This is the encryption key management methods employed by this client for IEEE 802.11 wireless frame encryption. If none of the bits is set, no key management method is employed. |
| C32 cDot11ClientPacketsReceived | 1.3.6.1.4.1.9.9.273.1.3.1.1.6 | Counter32 | read-only | The number of packets received from this client. |
| C32 cDot11ClientPacketsSent | 1.3.6.1.4.1.9.9.273.1.3.1.1.8 | Counter32 | read-only | The number of packets sent to this client. |
| MAC cDot11ClientParentAddress | 1.3.6.1.4.1.9.9.273.1.2.1.1.2 | MacAddress | read-only | The MAC address of the parent of the client if the client is a repeater AP. If this client has no parent, the value is '00000000'h. |
| INT cDot11ClientPowerSaveMode | 1.3.6.1.4.1.9.9.273.1.2.1.1.9 | INTEGER | read-only | The power management mode of this client. The two possible modes are: active(1) - this client is not in power-save mode and it is actively sending or receiving data. powersave(2) - this client is in power-save mode and it wakes up once a while to check for pending data. |
| CDO cDot11ClientRadioType | 1.3.6.1.4.1.9.9.273.1.2.1.1.5 | CDot11ClientRadioType | read-only | The radio classification of the client. |
| CDO cDot11ClientRoleClassType | 1.3.6.1.4.1.9.9.273.1.2.1.1.3 | CDot11ClientRoleClassType | read-only | The role classification of the client. |
| I32 cDot11ClientSignalStrength | 1.3.6.1.4.1.9.9.273.1.3.1.1.3 | Integer32 | read-only | This is a device-dependent measure of the signal strength of the most recently received packet from this client. It may be normalized or unnormalized. |
| U32 cDot11ClientSigQuality | 1.3.6.1.4.1.9.9.273.1.3.1.1.4 | Unsigned32 | read-only | This is a device-dependent measure of the signal quality of the most recently received packet from this client. |
| STR cDot11ClientSoftwareVersion | 1.3.6.1.4.1.9.9.273.1.2.1.1.12 | SnmpAdminString | read-only | This is the Cisco IOS software version if the other end of the association is a bridge, access point, or repeater. If it is a wireless client, this is the firmware version of the client card. |
| cDot11ClientStatisticEntry | 1.3.6.1.4.1.9.9.273.1.3.1.1 | not-accessible | Each entry contains statistics about errors, data transmitting and receiving rates and counts information of a client. | |
| cDot11ClientStatistics | 1.3.6.1.4.1.9.9.273.1.3 | |||
| cDot11ClientStatisticTable | 1.3.6.1.4.1.9.9.273.1.3.1 | not-accessible | This table contains statistics and status of all clients on the cDot11ClientConfigInfoTable. This table has a one-to-one relationship with the cDot11ClientConfigInfoTable. | |
| NUM cDot11ClientSubIfIndex | 1.3.6.1.4.1.9.9.273.1.2.1.1.18 | InterfaceIndex | read-only | This is the ifIndex of the sub-interface which this wireless client is assigned to when it is successfully associated to the wireless station. The value of this object is 0, if this wireless station is not configured with VLAN and this wireless client is assigned to the radio hardware interface of this wireless station. |
| CDO cDot11ClientUnicastCipher | 1.3.6.1.4.1.9.9.273.1.2.1.1.23 | CDot11IfCipherType | read-only | These are all the possible unicast data frame cipher encryption type combinations currently supported on this IEEE 802.11 client. If none of the bits is set, the client is not performing any unicast data frame encryption. aesccm WPA AES CCMP encryption, ckip Cisco Per packet key hashing, cmic Cisco MMH MIC, ckip|cmic Cisco Per packet key hashing and Cisco MMH MIC, tkip WPA Temporal Key encryption, wep128 128-bit WEP key, wep40 40-bit WEP key. tkip|wep128 WPA Temporal Key and 128-bit WEP, tkip|wep40 WPA Temporal Key and 40-bit WEP. |
| U32 cDot11ClientUpTime | 1.3.6.1.4.1.9.9.273.1.3.1.1.2 | Unsigned32 | read-only | The time in seconds that this client has been associated with this device. |
| CDO cDot11ClientVlanId | 1.3.6.1.4.1.9.9.273.1.2.1.1.17 | CDot11IfVlanIdOrZero | read-only | This is the VLAN which this wireless client is assigned to when it is successfully associated to the wireless station. The value is 0 if this wireless client is not assigned to any VLAN or this wireless station is not configured with any VLAN. |
| T/F cDot11ClientWepEnabled | 1.3.6.1.4.1.9.9.273.1.2.1.1.6 | TruthValue | read-only | When this object is 'true', it indicates that the WEP key mechanism is used for transmitting frames of data for this client. The default value of this object is 'false'. |
| C32 cDot11ClientWepErrors | 1.3.6.1.4.1.9.9.273.1.3.1.1.13 | Counter32 | read-only | This is the number of packets received from this client which failed to be properly decrypted via the WEP security mechanism. |
| T/F cDot11ClientWepKeyMixEnabled | 1.3.6.1.4.1.9.9.273.1.2.1.1.7 | TruthValue | read-only | When this object is 'true', it indicates that this client is using WEP key mixing. |
| MAC cDot11ParentAddress | 1.3.6.1.4.1.9.9.273.1.1.1 | MacAddress | read-only | This is the MAC address of the parent access point or root bridge for this device. The value is zero if this is a root access point or bridge. |
| ciscoDot11ApAssocGlobalGroup | 1.3.6.1.4.1.9.9.273.2.2.5 | This group includes per AP or bridge global configuration information. | ||
| ciscoDot11AssocGlobalGroup | 1.3.6.1.4.1.9.9.273.2.2.1 | This is the device association information group. This is deprecated in favor of the ciscoDot11IfAssocStatGroup. | ||
| ciscoDot11AssociationMIB | 1.3.6.1.4.1.9.9.273 | This MIB module provides network management information on IEEE 802.11 wireless device association management and data packet forwarding configuration and statistics. This MIB is an extension to the IEEE802dot11-MIB and provides per client based information. The IEEE802dot11-MIB is defined in the IEEE Std 802.11-Jan 14 1999, Wireless LAN Medium Access Control and Physical Layer Specifications, by the LAN MAN Standards Committee of the IEEE Computer Society. GLOSSARY and ACRONYMS Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. AES Advanced Encryption Standard Association The service used to establish access point or station mapping and enable STA invocation of the distribution system serivces. (Wireless clients attempt to connect to access points.) Bridge Device that connects two or more segments and reduces traffic by analyzing the destination address, filtering the frame, and forwarding the frame to all connected segments. Bridge AP It is an AP that functions as a transparent bridge between 2 wired LAN segments. Bridge Host This is also known as Work Group Bridge. This is a non-root bridge that is connected to a remote LAN segment and will only communicate with repeaters or root bridges. It does not accept association from other wireless devices. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associated with the AP. CCX Cisco Compatible eXtensions A set of specifications which when implemented would make a client radio interoperable with a Cisco WLAN infrastructure and make best use of the innovations for enhanced security, mobility, quality of service and network management. CCMP Code Mode/CBC Mac Protocol Client (Client Station) A wireless device in a wireless network associated with an access point. Direct Sequence Spread Sprectrum ( DSSS ) DSSS is a method to send data where the transmitting and receiving systems operate at frequencies as wide as 22MHz. The wide channels help the participating systems to send more information at higher data rates than the FSSS systems. EAP Extensible Authentication Protocol EAP-TLS Extensible Authentication Protocol-Transport Layer Security Frequency Hopping Spread Spectrum ( FSSS ) FSSS systems hop from one frequency to another in the allowed band of frequencies during the data transmission. 83 MHz is specified as the allowed band of frequencies in the 2.4 GHz spectrum. IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. IEEE 802.11b The IEEE 802.11b standard describes DSSS systems that operate in the 2.4 GHz ISM band at data rates of 1, 2, 5,5 and 11 Mbps. IEEE 802.11a The IEEE 802.11a standard describes wireless LAN operation in the 5 GHz UNII band at data rates of 6, 9, 12, 18, 24, 36, 48 and 54 Mbps. IEEE 802.11g This standard specifies operation in 2.4 GHz ISM band at data rates of 6, 9, 12, 18. 24, 36, 48 and 54 Mbps. Industrial, Scientific and Medical band (ISM) A license-free band specified by the Federal Communications Commission for use by the wireless LAN systems. The ISM bands are located starting at 902 MHz, 2.4GHz and 5.8 GHz. MIC Message Integrity Check. A MIC can, optionally, be added to WEP-encrypted 802.11 frames. Non-Root Bridge This wireless bridge does not connect to the main wired LAN segment. It connects to a remote wired LAN segment and can associate to root bridges and other non-root bridges that accept client associations. It also can accept associations from other non-root bridges, repeater access points, and client devices. PCI Peripheral Component Interconnect A local bus standard developed by Intel Corporation. Most modern PCs include a PCI bus. PCI is a 64-bit bus, though it is usually implemented as a 32-bit bus. It can run at clock speeds of 33 or 66 MHz. At 32 bits and 33 MHz, it yields a throughput rate of 133 MBps. Repeater Device that connects multiple segments, listening to each and repeating signal on one to every other connected one; regenerates each transmission so that it can travel farther. Repeater or Non-root Access Point The repeater access point is not connected to the wired LAN. The Repeater is a wireless LAN transceiver that transfers data between a client and another access point, another repeater, or between two bridges. The repeater is placed within radio range of an access point connected to the wired LAN, another repeater, or an non-root bridge to extend the range of the infrastructure. Root Access Point This access point connects clients to the main wired LAN. Root Wireless Bridge This wireless bridge is connected to the main wired LAN. This wireless bridge can communicate with non-root wireless bridges, repeater access points, and client devices but not with another wireless root bridge. Only one wireless bridge in a wireless LAN can be set as the wireless root bridge. SSID Radio Service Set ID. It is used for identification during association. STA (WSTA) A non-AP 802.11 wireless station. TKIP WPA Temporal Key encryption. Unlicensed National Information Infrastucture (UNII) The UNII bands are in the 5 GHz range and are 100 MHz wide. These bands are used by 802.11a-compliant devices. WEP Wired Equivalent Privacy. 'WEP' is generally used to refer to 802.11 encryption. WPA WiFi Protected Access Work Group Bridges (WGB) See bridge host. | ||
| ciscoDot11AssocMIBCompliance | 1.3.6.1.4.1.9.9.273.2.1.1 | The compliance statement for the ciscoDot11Assoc group. | ||
| ciscoDot11AssocMIBComplianceRev1 | 1.3.6.1.4.1.9.9.273.2.1.2 | The compliance statement for the ciscoDot11Assoc group. This is deprecated in favor of the ciscoDot11AssocMIBComplianceRev2. | ||
| ciscoDot11AssocMIBComplianceRev2 | 1.3.6.1.4.1.9.9.273.2.1.3 | The compliance statement for the ciscoDot11Assoc group. | ||
| ciscoDot11AssocMIBComplianceRev3 | 1.3.6.1.4.1.9.9.273.2.1.4 | The compliance statement for this ciscoDot11AssociationMIB module. | ||
| ciscoDot11AssocMIBComplianceRev4 | 1.3.6.1.4.1.9.9.273.2.1.5 | The compliance statement for this ciscoDot11AssociationMIB module. | ||
| ciscoDot11AssocMIBComplianceRev5 | 1.3.6.1.4.1.9.9.273.2.1.6 | The compliance statement for this ciscoDot11AssociationMIB module. | ||
| ciscoDot11AssocMIBCompliances | 1.3.6.1.4.1.9.9.273.2.1 | |||
| ciscoDot11AssocMIBConformance | 1.3.6.1.4.1.9.9.273.2 | |||
| ciscoDot11AssocMIBGroups | 1.3.6.1.4.1.9.9.273.2.2 | |||
| ciscoDot11AssocMIBObjects | 1.3.6.1.4.1.9.9.273.1 | |||
| ciscoDot11ClientAuthenGroup | 1.3.6.1.4.1.9.9.273.2.2.8 | This group includes per IEEE 802.11 radio interface cipher related statistics collected. | ||
| ciscoDot11ClientConfigExtGroup | 1.3.6.1.4.1.9.9.273.2.2.9 | This group provides more configuration information about a particular associated 802.11 client. | ||
| ciscoDot11ClientConfigGroup | 1.3.6.1.4.1.9.9.273.2.2.2 | This is the client configuration information group. | ||
| ciscoDot11ClientInfoGroup | 1.3.6.1.4.1.9.9.273.2.2.4 | This group provides additional client specific information. | ||
| ciscoDot11ClientNewAuthenGroup | 1.3.6.1.4.1.9.9.273.2.2.10 | This group includes per IEEE 802.11 radio interface cipher related statistics collected. | ||
| ciscoDot11ClientStatGroup | 1.3.6.1.4.1.9.9.273.2.2.3 | This is the client statistics group. | ||
| ciscoDot11IfAssocStatGroup | 1.3.6.1.4.1.9.9.273.2.2.6 | This group includes per IEEE 802.11 radio interface association statistics. | ||
| ciscoDot11IfCipherStatGroup | 1.3.6.1.4.1.9.9.273.2.2.7 | This group includes per IEEE 802.11 radio interface cipher related statistics collected. |
RFC description
IEEE 802.11 wireless device association management for Cisco access points including client per-packet forwarding statistics.
Start monitoring Cisco Aironet-family wireless access points and bridges with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.