| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoImageLicenseMgmtMIB | 1.3.6.1.4.1.9.9.640 | | | The MIB module for managing the running image level
of a Cisco device. Cisco's licensing mechanism provides
flexibility to run a device on a chosen image level.
This mechanism is referred to as image level licensing.
Image level licensing leverages the universal image
based licensing solution.
The image level licensing mechanism works as follows -
A universal image that contains all levels of software
packages is loaded on to the device. At boot time, the
device determines the highest level of license and brings
up the appropriate software features or subsystems.
The user can configure the image level with which the
device has to boot. The system will verify whether the
appropriate license is available for the configured image
level. The image level for the next boot will be determined
based on the availability of the license. The following
scenarios explains some use-cases of image level licensing:
Scenario 1:
- Customer selects advsecurityk9 based image.
- Manufacturing installs advsecurity license on the device.
- This device will run all features that are part of the
base advsecurity license.
- Customer upgrades to advipservicesk9 license.
- The next boot level is set to advipservicesk9.
- The device will run advsecurityk9 feature until the
next reboot. After reboot the device will run
advipservicesk9 features.
Scenario 2:
- Customer selects advipservicesk9 based image.
- Manufacturing installs advipservices and advsecurity
license on the device.
- This device will run all features that are part of the
base advipservices license.
- No upgrades available for advipservices license.
The user has to accept the End User License Agreement(EULA)
before using this MIB to configure the image level.
This MIB should be used in conjuntion with
CISCO-LICENSE-MGMT-MIB module to achieve the image level
licensing functionality.
This MIB module defines objects which provides the different
image levels supported by the device and the license required
to enable a particular image level. It also defines objects
to let the user configure the required image level. The MIB
module contains notification which will be triggered when
the user changes the image level for next boot.
The CISCO-LICENSE-MGMT-MIB module should be used to export
the EULA and to configure the required license.
This MIB module is defined generically so it can be used for
both stand-alone as well as stackable devices. The
entPhysicalIndex imported from ENTITY-MIB is used to identify
the device uniquely. |
| ciscoImageLicenseMgmtMIBNotifs | 1.3.6.1.4.1.9.9.640.0 | | | |
| NTF cilmBootImageLevelChanged | 1.3.6.1.4.1.9.9.640.0.1 | | | This notification is triggered when next boot image level
is changed in the management entity. The current and
configured image level are indicated by cilmCurrentImageLevel
and cilmConfiguredBootImageLevel objects respectively. |
| ciscoImageLicenseMgmtMIBObjects | 1.3.6.1.4.1.9.9.640.1 | | | |
| cilmBootImageLevelTable | 1.3.6.1.4.1.9.9.640.1.1 | | not-accessible | A table that contains the configuration information of
current and next boot image level. This table contains
entries for each software module running in an image
loaded in the device. The software module is identified by
cilmModuleName and the device is identified by
entPhysicalIndex. |
| cilmBootImageLevelEntry | 1.3.6.1.4.1.9.9.640.1.1.1 | | not-accessible | An entry in the table for each module containing the
list of objects that define the configuration of next
boot level. The following information is specified by
the objects present in the table.
- Current image level.
- Configured image level for the next boot.
- Actual image level for the next boot.
- License store index for the current license.
- License index of the current license.
- License store index for the next boot license.
- License index of the next boot license. |
| STR cilmModuleName | 1.3.6.1.4.1.9.9.640.1.1.1.1 | SnmpAdminString | not-accessible | This object is used as one of the two indices in
cilmBootImageLevelTable. This object indicates the module
name of the software package. There can be multiple
modules in an image performing specific functionality.
For example, in a wireless image there can be two modules
- a base image module and a wireless module. |
| BOO cilmCurrentImageLevel | 1.3.6.1.4.1.9.9.640.1.1.1.2 | BootImageLevel | read-only | This object indicates the current image level that
the module is running. |
| BOO cilmConfiguredBootImageLevel | 1.3.6.1.4.1.9.9.640.1.1.1.3 | BootImageLevel | read-write | This object indicates the configured image level
of the module for the next boot.
Note: The configured next boot image level may not
be the actual next boot image level. The actual next
boot image level is denoted by cilmNextBootImageLevel
which is determined based on the license availability. |
| BOO cilmNextBootImageLevel | 1.3.6.1.4.1.9.9.640.1.1.1.4 | BootImageLevel | read-only | This object indicates the next boot image level. The
next boot image level can be different from configured
level. The next boot image level is determined based
on the availability of required license. |
| U32 cilmCurrentLicenseStoreIndex | 1.3.6.1.4.1.9.9.640.1.1.1.5 | Unsigned32 | read-only | This object indicates the license store index where the
currently used license is stored. This object has the same
value as clmgmtLicenseStoreIndex object and uniquely
identifies an entry in clmgmtLicenseStoreInfoTable in
CISCO-LICENSE-MGMT-MIB.
Note: The license store index can be '0' if no license is
installed and device is running base image. |
| U32 cilmCurrentLicenseIndex | 1.3.6.1.4.1.9.9.640.1.1.1.6 | Unsigned32 | read-only | This object indicates the license index of the currently used
license. This object has the same value as clmgmtLicenseIndex and
uniquely identifies an entry in clmgmtLicenseInfoTable in
CISCO-LICENSE-MGMT-MIB.
Note: The license index can be '0' if no license is
installed and device is running base image. |
| U32 cilmNextBootLicenseStoreIndex | 1.3.6.1.4.1.9.9.640.1.1.1.7 | Unsigned32 | read-only | This object indicates the license store index where the
next boot license is stored. This object has the same
value as clmgmtLicenseStoreIndex object and uniquely
identifies an entry in clmgmtLicenseStoreInfoTable in
CISCO-LICENSE-MGMT-MIB.
Note: The license store index can be '0' if no license is
installed for the next boot. |
| U32 cilmNextBootLicenseIndex | 1.3.6.1.4.1.9.9.640.1.1.1.8 | Unsigned32 | read-only | This object indicates the license index of the next boot
license. This object has the same value as clmgmtLicenseIndex
and uniquely identifies an entry in clmgmtLicenseInfoTable in
CISCO-LICENSE-MGMT-MIB.
Note: The license index can be '0' if no license is
installed for the next boot. |
| cilmImageLevelToLicenseMapTable | 1.3.6.1.4.1.9.9.640.1.2 | | not-accessible | This table contains the mapping between different
image levels of each modules in the image and the
license required to run the modules at a particular
image level. This table can be used to identify the
different image levels and the appropriate licenses
required for each. |
| cilmImageLevelToLicenseMapEntry | 1.3.6.1.4.1.9.9.640.1.2.1 | | not-accessible | An entry in the table containing the following
information.
- The image levels at the which the modules can be run.
- The license required to the run a module at a
particular image level.
- The priority of the license. |
| U32 cilmImageLicenseMapIndex | 1.3.6.1.4.1.9.9.640.1.2.1.1 | Unsigned32 | not-accessible | This is a running index used to identify an entry
of this table. |
| BOO cilmImageLicenseImageLevel | 1.3.6.1.4.1.9.9.640.1.2.1.2 | BootImageLevel | read-only | This object indicates the image level at which
a module can be run. A module can be run at
different image levels. An entry will be created
in this table for every module and image level
combination. |
| LIC cilmImageLicenseName | 1.3.6.1.4.1.9.9.640.1.2.1.3 | LicenseNameList | read-only | This object indicates the list of licenses needed to
be installed for the module to run at the image level
mentioned by cilmImageLicenseImageLevel object of this
entry. |
| U32 cilmImageLicensePriority | 1.3.6.1.4.1.9.9.640.1.2.1.4 | Unsigned32 | read-only | This object indicates the priority of the image level
mentioned by cilmImageLicenseImageLevel object of this
entry. The image level with the highest priority license
will be considered as the default level in the absense of
next boot image level configuration. For example if there
are three licenses l1, l2 and l3 in the ascending order of
priority, then by default l1 will be the level at which the
module will be running. If the next boot level is configured
then the configuration will override the priority. The highest
priority license supports a feature set which is a super set of
all other licenses. |
| T/F cilmEULAAccepted | 1.3.6.1.4.1.9.9.640.1.3 | TruthValue | read-write | This object when set to TRUE means that the user has
accepted the END USER LICENSE AGREEMENT. This object
has to be set to TRUE by the user before using the
objects in the cilmBootImageLevelTable to configure
the license. |
| cilmNotifCntl | 1.3.6.1.4.1.9.9.640.1.4 | | | |
| T/F cilmImageLevelChangedNotif | 1.3.6.1.4.1.9.9.640.1.4.1 | TruthValue | read-write | Specify whether or not a notification should be
generated on the detection of change in next boot
image level.
If set to TRUE, cilmBootImageLevelChanged notification
will be generated. It is the responsibility of the
management entity to ensure that the SNMP administrative
model is configured in such a way as to allow the
notification to be delivered. |
| ciscoImageLicenseMgmtMIBConform | 1.3.6.1.4.1.9.9.640.2 | | | |
| cilmModuleCompliances | 1.3.6.1.4.1.9.9.640.2.1 | | | |
| cilmModuleCompliance | 1.3.6.1.4.1.9.9.640.2.1.1 | | | Compliance statement for Cisco Image level license mgmt MIB. |
| cilmModuleGroups | 1.3.6.1.4.1.9.9.640.2.2 | | | |
| cilmAdminGroup | 1.3.6.1.4.1.9.9.640.2.2.1 | | | Objects for performing license set operation for setting
next boot level. |
| cilmOperGroup | 1.3.6.1.4.1.9.9.640.2.2.2 | | | Objects for getting current image level configuration data. |
| cilmNotifGroup | 1.3.6.1.4.1.9.9.640.2.2.3 | | | Objects for getting current image level configuration data. |
