CIE1000-FIRMWARE-MIB

All MIBs › CIE1000-FIRMWARE-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2014-12-16

Category: Cisco Devices

Description: Manages firmware image upload, version tracking, and software upgrade operations on Cisco IE1000 industrial switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIE1000-FIRMWARE-MIB?

CIE1000-FIRMWARE-MIB is a Cisco private MIB for managing firmware images and upgrade operations on IE1000 industrial Ethernet switches. It exposes an image status table (version, build date, code revision, upload status) and a per-switch table extending this across members of a switch stack. Its core purpose is software status monitoring: confirming which firmware version is running or staged, and tracking the progress of an in-flight upload/upgrade operation. It is a self-contained Cisco-specific structure with no strong dependency on other standard MIBs beyond the switch's own stacking identity. It is used in industrial network lifecycle/patch management to verify and audit software versions across fleets of IE1000 switches, usually starting with a CIE1000-FIRMWARE-MIB download to load the module definitions into a MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIE1000-FIRMWARE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IE1000 industrial Ethernet switch

Monitoring Examples

cie1000FirmwareStatusImageTable exposes cie1000FirmwareStatusImageVersion, ImageBuiltDate and ImageCodeRevision for each stored image (identified by cie1000FirmwareStatusImageNumber/Type/Name), letting an NMS confirm which firmware version is active versus backup. cie1000FirmwareStatusImageUploadStatus can be polled during a firmware push to detect success, failure, or an in-progress transfer, and cie1000FirmwareStatusSwitchTable (keyed by cie1000FirmwareStatusSwitchSwitchId) extends this per stack member, revealing any unit still running an old or mismatched version.

What Can Be Monitored

installed firmware image version
firmware build date and code revision
firmware upload/upgrade status
per-stack-member firmware version

Imported Objects

From CIE1000-TC

CIE1000DisplayString

From CISCO-IE1000-MIB

cie1000SwitchMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cie1000FirmwareMib	1.3.6.1.4.1.9.9.832.1.28			This is a private version of Firmware
cie1000FirmwareMibObjects	1.3.6.1.4.1.9.9.832.1.28.1
cie1000FirmwareStatus	1.3.6.1.4.1.9.9.832.1.28.1.3
cie1000FirmwareStatusImageTable	1.3.6.1.4.1.9.9.832.1.28.1.3.1		not-accessible	This is a table of status of images in flash.
cie1000FirmwareStatusImageEntry	1.3.6.1.4.1.9.9.832.1.28.1.3.1.1		not-accessible	Each entry has a set of image status.
I32 cie1000FirmwareStatusImageNumber	1.3.6.1.4.1.9.9.832.1.28.1.3.1.1.1	Integer32	accessible-for-notify	The number of image. The number starts from 0.
CIE cie1000FirmwareStatusImageType	1.3.6.1.4.1.9.9.832.1.28.1.3.1.1.2	CIE1000FirmwareStatusImageEnum	read-only	Image type of the status. bootloader(0) is for boot loader. activeFirmware(1) is for active (primary) firmware. alternativeFirmware(2) is for alternative (backup) firmware.
STR cie1000FirmwareStatusImageName	1.3.6.1.4.1.9.9.832.1.28.1.3.1.1.3	CIE1000DisplayString	read-only	Image name.
STR cie1000FirmwareStatusImageVersion	1.3.6.1.4.1.9.9.832.1.28.1.3.1.1.4	CIE1000DisplayString	read-only	Image version.
STR cie1000FirmwareStatusImageBuiltDate	1.3.6.1.4.1.9.9.832.1.28.1.3.1.1.5	CIE1000DisplayString	read-only	The built date when the image is built.
STR cie1000FirmwareStatusImageCodeRevision	1.3.6.1.4.1.9.9.832.1.28.1.3.1.1.6	CIE1000DisplayString	read-only	The code revesion which the image is built.
cie1000FirmwareStatusImageUpload	1.3.6.1.4.1.9.9.832.1.28.1.3.2
CIE cie1000FirmwareStatusImageUploadStatus	1.3.6.1.4.1.9.9.832.1.28.1.3.2.1	CIE1000FirmwareUploadStatusEnum	read-only	The status indicates the status of current upload operation. It is updated automatically. Modifying this flag does not take any effect. none(0) means no upload operation. success(1) means upload operation is successful. inProgress(2) means current upload operation is in progress. errIvalidIp(3) means upload operation is failed due to invalid IP address. errTftpFailed(4) means upload operation is failed due to failed TFTP operation. errBusy(5) means upload operation is failed due to other upload in processing. errMemoryInsufficient(6) means upload operation is failed due to memory insufficient. errInvalidImage(7) means upload operation is failed due to invalid image. errWriteFlash(8) means upload operation is failed due to failed writing flash. errSameImageExisted(9) means upload operation is failed because the upload image is the same as the one in flash. errUnknownImage(10) means upload operation is failed because the type of upload image is unknown. errFlashImageNotFound(11) means upload operation is failed because the location in flash to upload the image is not found. errFlashEntryNotFound(12) means upload operation is failed because the corresponding entry in flash to upload the image is not found. errCrc(13) means upload operation is failed due to incorrect CRC in the upload image. errImageSize(14) means upload operation is failed due to invalid image size. errEraseFlash(15) means upload operation is failed due to failed erasing flash. errIncorrectImageVersion(16) means upload operation is failed due to incorrect version of the upload image. errDownloadUrl(17) means upload operation is failed due to fail to download image from URL. errInvalidUrl(18) means upload operation is failed due to invalid URL. errInvalidFilename(19) means upload operation is failed due to invalid filename of the upload image. errInvalidPath(20) means upload operation is failed due to invalid path of the upload image.
cie1000FirmwareStatusSwitchTable	1.3.6.1.4.1.9.9.832.1.28.1.3.3		not-accessible	This is a table of status of images in switch.
cie1000FirmwareStatusSwitchEntry	1.3.6.1.4.1.9.9.832.1.28.1.3.3.1		not-accessible	Each entry has a set of image status.
I32 cie1000FirmwareStatusSwitchSwitchId	1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.1	Integer32	accessible-for-notify	The ID of switch.
STR cie1000FirmwareStatusSwitchChipId	1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.2	CIE1000DisplayString	read-only	ID of chip.
STR cie1000FirmwareStatusSwitchBoardType	1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.3	CIE1000DisplayString	read-only	Type of board.
U32 cie1000FirmwareStatusSwitchPortCnt	1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.4	Unsigned32	read-only	Count of ports.
STR cie1000FirmwareStatusSwitchProduct	1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.5	CIE1000DisplayString	read-only	Product name.
STR cie1000FirmwareStatusSwitchVersion	1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.6	CIE1000DisplayString	read-only	Image version.
STR cie1000FirmwareStatusSwitchBuiltDate	1.3.6.1.4.1.9.9.832.1.28.1.3.3.1.7	CIE1000DisplayString	read-only	The built date when the image is built.
cie1000FirmwareControl	1.3.6.1.4.1.9.9.832.1.28.1.4
cie1000FirmwareControlGlobals	1.3.6.1.4.1.9.9.832.1.28.1.4.1
T/F cie1000FirmwareControlGlobalsSwapFirmware	1.3.6.1.4.1.9.9.832.1.28.1.4.1.1	TruthValue	read-write	Swap firmware between active (primary) and alternative (backup). true is to swap the firmware. false is to do nothing.
cie1000FirmwareControlImageUpload	1.3.6.1.4.1.9.9.832.1.28.1.4.2
T/F cie1000FirmwareControlImageUploadDoUpload	1.3.6.1.4.1.9.9.832.1.28.1.4.2.1	TruthValue	read-write	Action to do upload image or not. true is to do the upload operation. false is to do nothing. The upload operation may need longer time to upload the image, so the SNMP timeout time needs to be modified accordingly.
CIE cie1000FirmwareControlImageUploadImageType	1.3.6.1.4.1.9.9.832.1.28.1.4.2.2	CIE1000FirmwareUploadImageEnum	read-write	Type of image to upload. bootloader(0) is to upload bootloader. firmware(1) is to upload application firmware.
STR cie1000FirmwareControlImageUploadUrl	1.3.6.1.4.1.9.9.832.1.28.1.4.2.3	CIE1000DisplayString	read-write	The location of image to upload. It is a specific character string that constitutes a reference to a resource. Syntax: ://[[:]@][:][/]/ For example, tftp://10.10.10.10/new_image_path/new_image.dat, http://username:password@10.10.10.10:80/new_image_path/new_image.dat. A valid file name is a text string drawn from alphabet (A-Za-z), digits (0-9), dot (.), hyphen (-), under score(_). The maximum length is 63 and hyphen must not be first character. The file name content that only contains '.' is not allowed.
cie1000FirmwareMibConformance	1.3.6.1.4.1.9.9.832.1.28.2
cie1000FirmwareMibCompliances	1.3.6.1.4.1.9.9.832.1.28.2.1
cie1000FirmwareMibCompliance	1.3.6.1.4.1.9.9.832.1.28.2.1.1			The compliance statement for the implementation.
cie1000FirmwareMibGroups	1.3.6.1.4.1.9.9.832.1.28.2.2
cie1000FirmwareStatusImageTableInfoGroup	1.3.6.1.4.1.9.9.832.1.28.2.2.1			A collection of objects.
cie1000FirmwareStatusImageUploadInfoGroup	1.3.6.1.4.1.9.9.832.1.28.2.2.2			A collection of objects.
cie1000FirmwareStatusSwitchTableInfoGroup	1.3.6.1.4.1.9.9.832.1.28.2.2.3			A collection of objects.
cie1000FirmwareControlGlobalsInfoGroup	1.3.6.1.4.1.9.9.832.1.28.2.2.4			A collection of objects.
cie1000FirmwareControlImageUploadInfoGroup	1.3.6.1.4.1.9.9.832.1.28.2.2.5			A collection of objects.

RFC description

Firmware management for Cisco IE1000 industrial ethernet switches, including firmware status and TFTP upload operations.

Start monitoring Cisco IE1000 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIE1000-FIRMWARE-MIB

What Is CIE1000-FIRMWARE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description