CISCO-DMN-DSG-ABOUT-REV2-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-DMN-DSG-ABOUT-REV2-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2013-05-15

Category: Cisco Devices, Satellite

Description: Provides updated identification and hardware/software version objects for the Cisco DMN D9800 digital satellite receiver.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-DMN-DSG-ABOUT-REV2-MIB?

CISCO-DMN-DSG-ABOUT-REV2-MIB is a Cisco Systems, Inc. (Digital Media Networks, DSG cable-edge platform, built on CISCO-DMN-DSG-ROOT-MIB) proprietary MIB reporting board/firmware inventory. Its objects cover a PCB-version table (index, position, ID, revision, options, serial number), a firmware-version table (board, row, ID, version, validation code), a current-application table, and a current-FPGA table. As a hardware-status MIB it lets an administrator confirm firmware/FPGA revision and validation status per board on a Cisco DSG cable-edge platform. It is deployed on Cisco Systems DSG (Digital Media Networks) cable-edge platforms. Engineers can download the CISCO-DMN-DSG-ABOUT-REV2-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-DMN-DSG-ABOUT-REV2-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Cisco Systems DSG (Digital Media Networks) cable-edge platforms

Monitoring Examples

An administrator checks firmwareVersionVersion and firmwareVersionValidationCode to confirm firmware revision and validation status on a Cisco DSG cable-edge board.

What Can Be Monitored

  • board firmware/FPGA revision and validation status
Imported Objects

From CISCO-DMN-DSG-ROOT-MIB

ciscoDSGUtilitiesOBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
OIDs

RFC description

Provides board version, revision, and serial number information for Cisco digital set-top boxes.

Start monitoring Cisco DMN D9800 digital satellite gateway with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-DMN-DSG-ABOUT-REV2-MIB