CISCO-ITP-GSCCP-MIB

All MIBs › CISCO-ITP-GSCCP-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2010-03-05

Category: Cisco Devices, SNA and Legacy Protocols

Description: Manages ITP global SCCP (Signaling Connection Control Part) routing and subsystem status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-ITP-GSCCP-MIB?

CISCO-ITP-GSCCP-MIB is a Cisco vendor MIB for the Cisco IP Transfer Point (ITP), a hardware/software platform that transports SS7 (Signaling System No. 7) telecom signaling traffic over IP, specifically covering the Global SCCP (Signaling Connection Control Part) layer. It exposes SCCP message statistics and Global Title Translation (GTT) performance/error data, including per-instance total and local message counts, GTT translation sampling periods, error periods, and error recovery counts, along with notification enable flags for GTT map-state, load-table, and translation-error events. Administrators use this MIB to monitor the software/protocol-processing status of the ITP node — tracking message throughput per SCCP instance and watching for spikes in GTT translation errors or notification-triggered state changes that indicate SS7 routing problems or signaling link/subsystem faults. The module explicitly references ITU-T Q.752 SS7 monitoring/measurement standards as its basis, showing a clear dependency on ITU SS7 standards. It is typically deployed in telecom carrier networks where Cisco ITP nodes interconnect SS7 signaling points with an IP-based signaling backbone. Network engineers evaluating or troubleshooting this functionality can download the CISCO-ITP-GSCCP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-ITP-GSCCP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IP Transfer Point (ITP) SS7-over-IP signaling node

Monitoring Examples

An operator would poll cgsccpInstTable (via cgsccpInstTableEntry) to read cgsccpInstTotalMsgs, cgsccpInstLocalMsgs, and cgsccpInstTotalGttMsgs for each SCCP instance, tracking overall signaling message volume, and would watch cgsccpGttTransErrorsNotifEnabled-driven traps along with cgsccpGttErrorRecoveryCount to detect GTT translation failures. A rising cgsccpGttErrorRecoveryCount combined with a drop in cgsccpInstTotalGttMsgs would indicate the ITP node is struggling to translate global titles correctly, a sign of an SS7 routing table or subsystem fault. These objects are drawn directly from the sample objects provided for this MIB.

What Can Be Monitored

SCCP message counts (total/local)
GTT message counts
GTT translation error/recovery counts
GTT sampling and error periods
notification enable state for GTT events

Imported Objects

From CISCO-ITP-GSP-MIB

cgspCLLICode	OBJECT-TYPE
cgspEventSequenceNumber	OBJECT-TYPE
cgspInstNetwork	OBJECT-TYPE

From CISCO-ITP-TC-MIB

CItpTcDisplayPC
CItpTcGtaLongAddr
CItpTcGtaLongDisplay
CItpTcGtaLongDisplayLen
CItpTcNAI
CItpTcNetworkName
CItpTcNumberingPlan
CItpTcPointCode
CItpTcSubSystemNumber
CItpTcTableLoadStatus
CItpTcTranslationType
CItpTcURL
CItpTcXuaName

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From CISCO-TC

EntPhysicalIndexOrZero

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using cgsccpInstTotalMsgs OID:

Select a Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cgsccpInstTotalMsgs into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This counter is incremented every time a message is handled from a local or remote subsystem(Q752/9.3). On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in packets), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
CGS cgsccpClassIdx	1.3.6.1.4.1.9.9.335.1.14.1.1.1	CgsccpClass	not-accessible	The SCCP Class index.
cgsccpClassSsn	1.3.6.1.4.1.9.9.335.1.14
cgsccpGttAppGr	1.3.6.1.4.1.9.9.335.1.7
cgsccpGttAppGr2	1.3.6.1.4.1.9.9.335.1.11
CIT cgsccpGttAppGr2AsName	1.3.6.1.4.1.9.9.335.1.11.1.1.11	CItpTcXuaName	read-create	The Application Server (AS) name specified by the item in the GTT Application Group. It is valid only when cgsccpGttAppGr2Type is 'as'. Otherwise it is a zero length string.
CGS cgsccpGttAppGr2Cost	1.3.6.1.4.1.9.9.335.1.11.1.1.5	CgsccpGttAppCost	read-create	The cost for the item in the GTT Application Group. When the cgsccpGttAppGr2Mult object has 'cost' value, this object is required when entry is created. Otherwise, this value does not apply.
U32 cgsccpGttAppGr2EntNum	1.3.6.1.4.1.9.9.335.1.11.1.1.2	Unsigned32	not-accessible	The entry number is an arbitrary number. It is used to identify each application group entry.
CGS cgsccpGttAppGr2Mult	1.3.6.1.4.1.9.9.335.1.11.1.1.3	CgsccpGttMultInd	read-create	The multiplicity of the GTT Application Group.
CGS cgsccpGttAppGr2Name	1.3.6.1.4.1.9.9.335.1.11.1.1.1	CgsccpGttAppName	not-accessible	The GTT Application Group name.
CIT cgsccpGttAppGr2Network	1.3.6.1.4.1.9.9.335.1.11.1.1.14	CItpTcNetworkName	read-create	The processing of global title translation may result in a packet being transferred from one network to another. This object specifies the target network.
CIT cgsccpGttAppGr2NewSsn	1.3.6.1.4.1.9.9.335.1.11.1.1.12	CItpTcSubSystemNumber	read-create	The new subsystem number (SSN) specified by the item in the GTT Application Group. It is valid only when cgsccpGttAppGr2Type is 'as'. Otherwise it is zero.
C32 cgsccpGttAppGr2NumUsed	1.3.6.1.4.1.9.9.335.1.11.1.1.13	Counter32	read-only	The number of times this item in the GTT Application Group is used successfully.
NUM cgsccpGttAppGr2Pc	1.3.6.1.4.1.9.9.335.1.11.1.1.7	CItpTcPointCode	read-create	The point code specified by the item in the GTT Application Group. When the cgsccpGttAppGr2Type object has 'pc' or pcssn' values this object is required when entry is created. Otherwise, this value does not apply and can default to zero.
G32 cgsccpGttAppGr2RefCount	1.3.6.1.4.1.9.9.335.1.11.1.1.10	Gauge32	read-only	The number of global title addresses referring to this application group.
CGS cgsccpGttAppGr2Ri	1.3.6.1.4.1.9.9.335.1.11.1.1.9	CgsccpGttRoutingInd	read-create	The routing indicator (RI) specified by the item in the GTT Application Group.
ROW cgsccpGttAppGr2RowStatus	1.3.6.1.4.1.9.9.335.1.11.1.1.15	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cgsccpGttAppGr2Table following the RowStatus textual convention.
CIT cgsccpGttAppGr2Ssn	1.3.6.1.4.1.9.9.335.1.11.1.1.8	CItpTcSubSystemNumber	read-create	The subsystem number (SSN) specified by the item in the GTT Application Group. It is valid only when cgsccpGttAppGr2Type is 'pcssn'. Otherwise it is zero.
cgsccpGttAppGr2Table	1.3.6.1.4.1.9.9.335.1.11.1		not-accessible	A table of SCCP GTT Application Group Table entries.
cgsccpGttAppGr2TableEntry	1.3.6.1.4.1.9.9.335.1.11.1.1		not-accessible	A list of SCCP GTT Application Group attributes.
CGS cgsccpGttAppGr2Type	1.3.6.1.4.1.9.9.335.1.11.1.1.4	CgsccpGttAppType	read-create	The type of the item in the GTT Application Group.
U32 cgsccpGttAppGr2Weight	1.3.6.1.4.1.9.9.335.1.11.1.1.6	Unsigned32	read-create	The weighting factor used for the item in the GTT Application Group. When the cgsccpGttAppGr2Mult object has 'cgpa' value, this object is required when entry is created. Otherwise, this value does not apply and can default zero.
CIT cgsccpGttAppGrAsName	1.3.6.1.4.1.9.9.335.1.7.1.1.10	CItpTcXuaName	read-create	The Application Server (AS) name specified by the item in the GTT Application Group. It is valid only when cgsccpGttAppGrType is 'as'. Otherwise it is a zero length string.
CGS cgsccpGttAppGrCost	1.3.6.1.4.1.9.9.335.1.7.1.1.2	CgsccpGttAppCost	not-accessible	The cost for the item in the GTT Application Group.
U32 cgsccpGttAppGrEntNum	1.3.6.1.4.1.9.9.335.1.7.1.1.3	Unsigned32	not-accessible	The entry number used to identify each application group entry that have the same cost.
CGS cgsccpGttAppGrMult	1.3.6.1.4.1.9.9.335.1.7.1.1.8	CgsccpGttMultInd	read-create	The multiplicity of the GTT Application Group.
CGS cgsccpGttAppGrName	1.3.6.1.4.1.9.9.335.1.7.1.1.1	CgsccpGttAppName	not-accessible	The GTT Application Group name.
CIT cgsccpGttAppGrNetwork	1.3.6.1.4.1.9.9.335.1.7.1.1.14	CItpTcNetworkName	read-create	The processing of global title translation may result in a packet being transferred from one network to another. This object specifies the target network.
CIT cgsccpGttAppGrNewSsn	1.3.6.1.4.1.9.9.335.1.7.1.1.11	CItpTcSubSystemNumber	read-create	The new subsystem number (SSN) specified by the item in the GTT Application Group. It is valid only when cgsccpGttAppGrType is 'as'. Otherwise it is zero.
C32 cgsccpGttAppGrNumUsed	1.3.6.1.4.1.9.9.335.1.7.1.1.12	Counter32	read-only	The number of times this item in the GTT Application Group is used successfully.
NUM cgsccpGttAppGrPc	1.3.6.1.4.1.9.9.335.1.7.1.1.5	CItpTcPointCode	read-create	The point code specified by the item in the GTT Application Group. When the cgsccpGttAppGrType object has 'pc' or pcssn' values this object is required when entry is created. Otherwise, this value does not apply and can default to zero.
G32 cgsccpGttAppGrRefCount	1.3.6.1.4.1.9.9.335.1.7.1.1.9	Gauge32	read-only	The number of global title addresses referring to this application group.
CGS cgsccpGttAppGrRi	1.3.6.1.4.1.9.9.335.1.7.1.1.7	CgsccpGttRoutingInd	read-create	The routing indicator (RI) specified by the item in the GTT Application Group.
ROW cgsccpGttAppGrRowStatus	1.3.6.1.4.1.9.9.335.1.7.1.1.13	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cgsccpGttAppGrTable following the RowStatus textual convention.
CIT cgsccpGttAppGrSsn	1.3.6.1.4.1.9.9.335.1.7.1.1.6	CItpTcSubSystemNumber	read-create	The subsystem number (SSN) specified by the item in the GTT Application Group. It is valid only when cgsccpGttAppGrType is 'pcssn'. Otherwise it is zero.
cgsccpGttAppGrTable	1.3.6.1.4.1.9.9.335.1.7.1		not-accessible	A table of SCCP GTT Application Group Table entries.
cgsccpGttAppGrTableEntry	1.3.6.1.4.1.9.9.335.1.7.1.1		not-accessible	A list of SCCP GTT Application Group attributes.
CGS cgsccpGttAppGrType	1.3.6.1.4.1.9.9.335.1.7.1.1.4	CgsccpGttAppType	read-create	The type of the item in the GTT Application Group.
cgsccpGttConPc	1.3.6.1.4.1.9.9.335.1.3
CGS cgsccpGttConPcListName	1.3.6.1.4.1.9.9.335.1.3.1.1.1	CgsccpConPcListName	not-accessible	The name of the Concerned Point Code list.
ROW cgsccpGttConPcRowStatus	1.3.6.1.4.1.9.9.335.1.3.1.1.3	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cgsccpGttConPcTable following the RowStatus textual convention.
cgsccpGttConPcTable	1.3.6.1.4.1.9.9.335.1.3.1		not-accessible	A table of concerned point codes.
cgsccpGttConPcTableEntry	1.3.6.1.4.1.9.9.335.1.3.1.1		not-accessible	A list of concerned point codes.
NUM cgsccpGttConPointCode	1.3.6.1.4.1.9.9.335.1.3.1.1.2	CItpTcPointCode	not-accessible	The concerned point code for SCCP GTT.
U32 cgsccpGttErrorPeriod	1.3.6.1.4.1.9.9.335.1.1.6	Unsigned32	read-write	The length of the sample window used to collect global title translations errors.
U32 cgsccpGttErrorRecoveryCount	1.3.6.1.4.1.9.9.335.1.1.7	Unsigned32	read-write	The number contiguous sample windows that have to be error free before the ciscoGsccpGttErrors notifications will be generated indicating end of global title translation errors condition.
cgsccpGttErrors	1.3.6.1.4.1.9.9.335.1.12
G32 cgsccpGttErrorsDpcCongested	1.3.6.1.4.1.9.9.335.1.12.1.1.10	Gauge32	accessible-for-notify	This counter is incremented every time a point code is congested at the GTT Mated Application. This counter is derived from cgsccpGttMapQ752T7E4 object.
G32 cgsccpGttErrorsDpcUnavailable	1.3.6.1.4.1.9.9.335.1.12.1.1.8	Gauge32	accessible-for-notify	This counter is incremented every time a point code is unavailable at the GTT Mated Application. This counter is derived from cgsccpGttMapQ752T7E3Un object.
G32 cgsccpGttErrorsGtaNotFound	1.3.6.1.4.1.9.9.335.1.12.1.1.3	Gauge32	accessible-for-notify	This counter is incremented every time a global title title translations was required and a selector was not found. This counter is derived from cgsccpGttQ752T7E2 object.
G32 cgsccpGttErrorsHopViolation	1.3.6.1.4.1.9.9.335.1.12.1.1.4	Gauge32	accessible-for-notify	This counter is incremented every time a hop count violation is found in the MSU. This counter is derived from cgsccpInstQ752T7E13 object.
G32 cgsccpGttErrorsIncorrectFormat	1.3.6.1.4.1.9.9.335.1.12.1.1.2	Gauge32	accessible-for-notify	This counter is incremented every time an invalid Global Title format is found while performing the global title translation. This counter is derived from cgsccpInstInvalidGttFormat object.
G32 cgsccpGttErrorsMapNotFound	1.3.6.1.4.1.9.9.335.1.12.1.1.5	Gauge32	accessible-for-notify	This counter is incremented every time a global title translation is successful to a certain PC/SSN but it was not found in the GTT Mated Application table. This counter is derived from cgsccpInstMapNotFound object.
G32 cgsccpGttErrorsReassFailure	1.3.6.1.4.1.9.9.335.1.12.1.1.15	Gauge32	accessible-for-notify	This counter is incremented every time when the incoming SCCP message needs to be dropped due to the reassembly failure. This counter is derived from cgsccpInstReassFail object.
G32 cgsccpGttErrorsReassUnsupported	1.3.6.1.4.1.9.9.335.1.12.1.1.14	Gauge32	accessible-for-notify	This counter is incremented every time when the incoming SCCP message needs to be dropped due to the unsupported reassembly feature. This counter is derived from cgsccpInstReassUnsup object.
G32 cgsccpGttErrorsRouteFailure	1.3.6.1.4.1.9.9.335.1.12.1.1.12	Gauge32	accessible-for-notify	This counter is incremented every time a the MTP3 layer failed at the GTT Mated Application. This counter is derived from cgsccpGttMapQ752T7E3Fail object.
G32 cgsccpGttErrorsSccpUnavailable	1.3.6.1.4.1.9.9.335.1.12.1.1.7	Gauge32	accessible-for-notify	This counter is incremented every time a SCCP is unavailable at the GTT Mated Application. This counter is derived from cgsccpGttMapSccpUnavail object.
G32 cgsccpGttErrorsSccpUnqualified	1.3.6.1.4.1.9.9.335.1.12.1.1.13	Gauge32	accessible-for-notify	This counter is incremented every time a global title translation is unsuccessful and the error type not covered by other specific error types. This counter is derived from cgsccpInstQ752Unqualified object.
G32 cgsccpGttErrorsSegFailure	1.3.6.1.4.1.9.9.335.1.12.1.1.17	Gauge32	accessible-for-notify	This counter is incremented every time when either SCCP message from a remote node or local SCCP stack needs to be dropped due to the segmentation failure. This counter is derived from cgsccpInstSegFail object.
G32 cgsccpGttErrorsSegUnsupported	1.3.6.1.4.1.9.9.335.1.12.1.1.16	Gauge32	accessible-for-notify	This counter is incremented every time when either SCCP message from a remote node or local SCCP stack needs to be dropped due to the unsupported segmentation feature. This counter is derived from cgsccpInstSegUnsup object.
G32 cgsccpGttErrorsSelectorNotFound	1.3.6.1.4.1.9.9.335.1.12.1.1.1	Gauge32	accessible-for-notify	This counter is incremented every time a translation was requested for a combination of Translation Type, Numbering Plan and Nature of Address for which no translation exists in the signalling point. This occurs when no selector is available for the combination of parameters provided in the MSU. This counter is derived from cgsccpInstQ752T7E1 object.
G32 cgsccpGttErrorsSsCongested	1.3.6.1.4.1.9.9.335.1.12.1.1.11	Gauge32	accessible-for-notify	This counter is incremented every time a subsystem is congested at the GTT Mated Application. This counter is derived from cgsccpGttMapQ752T7E6 object.
G32 cgsccpGttErrorsSsUnavailable	1.3.6.1.4.1.9.9.335.1.12.1.1.9	Gauge32	accessible-for-notify	This counter is incremented every time a subsystem is unavailable at the GTT Mated Application. This counter is derived from cgsccpGttMapQ752T7E5 object.
cgsccpGttErrorsTable	1.3.6.1.4.1.9.9.335.1.12.1		not-accessible	This table is used to indicate errors in global title translation and will be used to provide information for ciscoGsccpGttErrors notification.
cgsccpGttErrorsTableEntry	1.3.6.1.4.1.9.9.335.1.12.1.1		not-accessible	All objects in this table are derived from other objects in this MIB. At the end of each interval the values of these objects will be updated with number of errors that occurred during last interval. The length of the interval is defined by the cgsccpGttErrorPeriod object.
G32 cgsccpGttErrorsUnequipedSS	1.3.6.1.4.1.9.9.335.1.12.1.1.6	Gauge32	accessible-for-notify	This counter is incremented every time a global title translation could not be performed due to an unequipped subsystem (SS). This counter is derived from cgsccpInstQ752T7E7 object.
cgsccpGttGta	1.3.6.1.4.1.9.9.335.1.6
CIT cgsccpGttGtaAddr	1.3.6.1.4.1.9.9.335.1.6.1.1.1	CItpTcGtaLongAddr	not-accessible	The Global Title Address is 8 octets of the Called Party Address (CDPA).
CIT cgsccpGttGtaAddrDisp	1.3.6.1.4.1.9.9.335.1.6.1.1.11	CItpTcGtaLongDisplay	read-only	The ASCII display string of Global Title Address up to 64 hex digits of the Called Party Address (CDPA). A zero length string specifies a default GTA value for the selector.
CIT cgsccpGttGtaAddrLen	1.3.6.1.4.1.9.9.335.1.6.1.1.12	CItpTcGtaLongDisplayLen	read-only	The number of hex digits in the Global Title Address of the Called Party Address (CDPA). For a default GTA, the address length is zero.
CIT cgsccpGttGtaAsName	1.3.6.1.4.1.9.9.335.1.6.1.1.13	CItpTcXuaName	read-create	The Application Server (AS) name specified by the GTA. It is valid only when cgsccpGttGtaResType is 'as'. Otherwise it is a zero length string. The null string indicates that a application server name has not been specified.
CIT cgsccpGttGtaNetwork	1.3.6.1.4.1.9.9.335.1.6.1.1.15	CItpTcNetworkName	read-create	The processing of global title translation may result in a packet being transferred from one network to another. This object specifies the target network.
CGS cgsccpGttGtaQOS	1.3.6.1.4.1.9.9.335.1.6.1.1.10	CgsccpGttQOS	read-create	The SCCP GTT GTA specifies the QOS.
CGS cgsccpGttGtaResAppGroup	1.3.6.1.4.1.9.9.335.1.6.1.1.6	CgsccpGttAppName	read-create	When the GTA translates to an application group, it has a valid application group name and cgsccpGttGtaResType is 'app'. The null string indicates that an application group has not been specified.
NUM cgsccpGttGtaResMap	1.3.6.1.4.1.9.9.335.1.6.1.1.5	CItpTcPointCode	read-create	When the GTA translates to a point code and an optional SSN, it has a valid point code and cgsccpGttGtaResType is 'pcssn'. Otherwise it is zero.
NUM cgsccpGttGtaResPc	1.3.6.1.4.1.9.9.335.1.6.1.1.4	CItpTcPointCode	read-create	When the GTA translates to a point code, it has a valid point code and cgsccpGttGtaResType is 'pc'. Otherwise it is zero.
CGS cgsccpGttGtaResType	1.3.6.1.4.1.9.9.335.1.6.1.1.3	CgsccpGttGtaResType	read-create	The SCCP Global Title Translation result type.
CGS cgsccpGttGtaRoutingInd	1.3.6.1.4.1.9.9.335.1.6.1.1.9	CgsccpGttRoutingInd	read-create	The SCCP GTT GTA specifies the routing indicator. When cgsccpGttGtaResType is 'pc' or 'pcssn', this object has a valid routing indicator. When cgsccpGttGtaResType is 'app' or 'as', the routing indicator is not applicable.
ROW cgsccpGttGtaRowStatus	1.3.6.1.4.1.9.9.335.1.6.1.1.14	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cgsccpGttGtaTable following the RowStatus textual convention.
CGS cgsccpGttGtaSelName	1.3.6.1.4.1.9.9.335.1.6.1.1.2	CgsccpGttSelName	read-create	The Global Title Address selector name from cgsccpGttSelTable.
cgsccpGttGtaTable	1.3.6.1.4.1.9.9.335.1.6.1		not-accessible	A table of SCCP Global Title Address entries.
cgsccpGttGtaTableEntry	1.3.6.1.4.1.9.9.335.1.6.1.1		not-accessible	A list of SCCP Global Title Address attributes.
CIT cgsccpGttGtaTTorSSN	1.3.6.1.4.1.9.9.335.1.6.1.1.7	CItpTcTranslationType	read-create	When this object is 'tt', the object cgsccpGttGtaTTorSSNvalue specifies the SCCP GTT Translation Type (TT). When this object is 'ssn', the object cgsccpGttGtaTTorSSNvalue specifies the SCCP SubSystem Number (SSN).
U32 cgsccpGttGtaTTorSSNvalue	1.3.6.1.4.1.9.9.335.1.6.1.1.8	Unsigned32	read-create	This object specifies SCCP GTT Translation Type (TT) value when cgsccpGttGtaTTorSSN is 'tt'. It specifies SCCP SubSystem Number (SSN) value when cgsccpGttGtaTTorSSN is 'ssn'. A zero value specifies that the TT or the SSN is not applicable for this GTA entry.
T/F cgsccpGttLoadTableNotifEnabled	1.3.6.1.4.1.9.9.335.1.1.4	TruthValue	read-write	The GTT load table notification truth value. 'true' Indicates that the ciscoGsccpGttLoadTable notification is to be generated when the a configuration is loaded. That is, the notification generation is enabled. 'false' Indicates that the ciscoGsccpGttLoadTable notification generation is disabled.
cgsccpGttMap	1.3.6.1.4.1.9.9.335.1.4
T/F cgsccpGttMapAdjacent	1.3.6.1.4.1.9.9.335.1.4.1.1.13	TruthValue	read-create	The GTT Mated App Point Code adjacent truth value. 'true' Indicates that MAP PC is adjacent. 'false' Indicates that MAP PC is not adjacent.
C32 cgsccpGttMapAltUsed	1.3.6.1.4.1.9.9.335.1.4.1.1.16	Counter32	read-only	This counter is incremented every time a message is re-routed on congestion by the GTT Mated Application.
NUM cgsccpGttMapBackupPc	1.3.6.1.4.1.9.9.335.1.4.1.1.9	CItpTcPointCode	read-create	The backup point code for the mated Application. The special value of zero indicates that no backup point code has been specified.
CIT cgsccpGttMapBackupSsn	1.3.6.1.4.1.9.9.335.1.4.1.1.10	CItpTcSubSystemNumber	read-create	The backup subsystem number for the mated Application. The special value of zero indicates that no backup subsystem number has been specified.
C32 cgsccpGttMapCongLvl1	1.3.6.1.4.1.9.9.335.1.4.1.1.26	Counter32	read-only	This counter is incremented every time a congestion of level 1 is experienced by the remote Signalling point corresponding to this MAP entry.
C32 cgsccpGttMapCongLvl2	1.3.6.1.4.1.9.9.335.1.4.1.1.27	Counter32	read-only	This counter is incremented every time a congestion of level 2 is experienced by the remote Signalling point corresponding to this MAP entry.
C32 cgsccpGttMapCongLvl3	1.3.6.1.4.1.9.9.335.1.4.1.1.28	Counter32	read-only	This counter is incremented every time a congestion of level 3 is experienced by the remote Signalling point corresponding to this MAP entry.
CGS cgsccpGttMapCongStatus	1.3.6.1.4.1.9.9.335.1.4.1.1.24	CgsccpGttMapCongStatus	read-only	The status of congestion level for this MAP point code.
CGS cgsccpGttMapConPcList	1.3.6.1.4.1.9.9.335.1.4.1.1.11	CgsccpConPcListName	read-create	The concerned point code list for the mated Application. The null string indicates that no concerned point code list has been specified.
CIT cgsccpGttMapDisplayPC	1.3.6.1.4.1.9.9.335.1.4.1.1.3	CItpTcDisplayPC	read-only	The MAP point code in display format.
CGS cgsccpGttMapDisplaySS	1.3.6.1.4.1.9.9.335.1.4.1.1.4	CgsccpGttDisplaySS	read-only	The MAP subsystem number in display format.
T/F cgsccpGttMapLastSsUsed	1.3.6.1.4.1.9.9.335.1.4.1.1.14	TruthValue	read-only	The GTT MAP last subsystem used truth value. 'true' It is the last used subsystem. 'false' It is not the last used subsystem.
CGS cgsccpGttMapMultInd	1.3.6.1.4.1.9.9.335.1.4.1.1.8	CgsccpGttMultInd	read-create	The GTT mated application multiplicity indicator.
NUM cgsccpGttMapPc	1.3.6.1.4.1.9.9.335.1.4.1.1.1	CItpTcPointCode	not-accessible	The point code for GTT MAP entry.
CGS cgsccpGttMapPcStatus	1.3.6.1.4.1.9.9.335.1.4.1.1.6	CgsccpGttMapPcStatus	read-only	The GTT MAP point code status.
C32 cgsccpGttMapQ752T7E3Fail	1.3.6.1.4.1.9.9.335.1.4.1.1.18	Counter32	read-only	This counter is incremented every time a the MTP3 layer failed at the GTT Mated Application.
C32 cgsccpGttMapQ752T7E3Un	1.3.6.1.4.1.9.9.335.1.4.1.1.19	Counter32	read-only	This counter is incremented every time a point code is unavailable at the GTT Mated Application.
C32 cgsccpGttMapQ752T7E4	1.3.6.1.4.1.9.9.335.1.4.1.1.20	Counter32	read-only	This counter is incremented every time a point code is congested at the GTT Mated Application.
C32 cgsccpGttMapQ752T7E5	1.3.6.1.4.1.9.9.335.1.4.1.1.21	Counter32	read-only	This counter is incremented every time a subsystem is unavailable at the GTT Mated Application.
C32 cgsccpGttMapQ752T7E6	1.3.6.1.4.1.9.9.335.1.4.1.1.22	Counter32	read-only	This counter is incremented every time a subsystem is congested at the GTT Mated Application.
G32 cgsccpGttMapRefCount	1.3.6.1.4.1.9.9.335.1.4.1.1.23	Gauge32	read-only	The number of global title addresses referring to this MAP entry.
T/F cgsccpGttMapReRouteOnCong	1.3.6.1.4.1.9.9.335.1.4.1.1.12	TruthValue	read-create	The GTT Mated App re-route on congestion truth value. 'true' Re-routing on congestion is enabled. 'false' Re-routing on congestion is disabled.
ROW cgsccpGttMapRowStatus	1.3.6.1.4.1.9.9.335.1.4.1.1.25	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cgsccpGttMapTable following the RowStatus textual convention.
C32 cgsccpGttMapSccpUnavail	1.3.6.1.4.1.9.9.335.1.4.1.1.17	Counter32	read-only	This counter is incremented every time a SCCP is unavailable at the GTT Mated Application.
C32 cgsccpGttMapSSARcvd	1.3.6.1.4.1.9.9.335.1.4.1.1.30	Counter32	read-only	This counter is incremented every time a subsystem allowed message is received from the remote Signalling point corresponding to this MAP entry.
CIT cgsccpGttMapSsn	1.3.6.1.4.1.9.9.335.1.4.1.1.2	CItpTcSubSystemNumber	not-accessible	The subsystem number (SSN) for GTT MAP entry.
C32 cgsccpGttMapSSPRcvd	1.3.6.1.4.1.9.9.335.1.4.1.1.29	Counter32	read-only	This counter is incremented every time a subsystem prohibited message is received from the remote Signalling point corresponding to this MAP entry.
CGS cgsccpGttMapSsStatus	1.3.6.1.4.1.9.9.335.1.4.1.1.7	CgsccpGttMapSsStatus	read-only	The GTT MAP subsystem status.
T/F cgsccpGttMapStateNotifEnabled	1.3.6.1.4.1.9.9.335.1.1.3	TruthValue	read-write	The Map state notification truth value. 'true' Indicates that the ciscoGsccpGttMapStateChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that the ciscoGsccpGttMapStateChange notification generation is disabled.
cgsccpGttMapTable	1.3.6.1.4.1.9.9.335.1.4.1		not-accessible	A table of SCCP GTT Mated Application (MAP) entries.
cgsccpGttMapTableEntry	1.3.6.1.4.1.9.9.335.1.4.1.1		not-accessible	A list of SCCP GTT MAP attributes.
CGS cgsccpGttMapType	1.3.6.1.4.1.9.9.335.1.4.1.1.5	CgsccpGttMapType	read-create	The GTT MAP subsystem type.
C32 cgsccpGttMapUsed	1.3.6.1.4.1.9.9.335.1.4.1.1.15	Counter32	read-only	This counter is incremented every time a message is routed by the GTT Mated Application.
CGS cgsccpGttNextSelName	1.3.6.1.4.1.9.9.335.1.5.1.1.13	CgsccpGttSelName	read-create	The name of GTT next selector table.
G32 cgsccpGttNextSelRefed	1.3.6.1.4.1.9.9.335.1.5.1.1.14	Gauge32	read-only	The counter that table was referenced.
cgsccpGttPref	1.3.6.1.4.1.9.9.335.1.8
cgsccpGttPref2	1.3.6.1.4.1.9.9.335.1.10
INT cgsccpGttPref2EncodingScheme	1.3.6.1.4.1.9.9.335.1.10.1.1.9	INTEGER	read-create	The encoding scheme to be used for output GTT address as follows. unknown - encoding scheme is not specified at the address level. bcdOdd - Use BCD odd encoding scheme. bcdEven - Use BCD even encoding scheme. national - national specific.
CIT cgsccpGttPref2InAddr	1.3.6.1.4.1.9.9.335.1.10.1.1.2	CItpTcGtaLongAddr	not-accessible	If the GTA of the Called Party Address (CDPA) matches the digits in this object, then the prefix conversion is performed.
CIT cgsccpGttPref2ItemNAI	1.3.6.1.4.1.9.9.335.1.10.1.1.6	CItpTcNAI	read-create	Nature of Address Indicator (NAI) for the current item in this Prefix Conversion Table.
CIT cgsccpGttPref2ItemNP	1.3.6.1.4.1.9.9.335.1.10.1.1.7	CItpTcNumberingPlan	read-create	Numbering Plan (NP) for the current item in this Prefix Conversion Table.
CGS cgsccpGttPref2Name	1.3.6.1.4.1.9.9.335.1.10.1.1.1	CgsccpGttPrefName	not-accessible	The GTT Prefix Conversion table name.
CIT cgsccpGttPref2OutAddr	1.3.6.1.4.1.9.9.335.1.10.1.1.3	CItpTcGtaLongAddr	read-create	If the GTA of the Called Party Address (CDPA) matches the digits in cgsccpGttPref2InAddr then this object is used in the prefix conversion.
ROW cgsccpGttPref2RowStatus	1.3.6.1.4.1.9.9.335.1.10.1.1.8	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cgsccpGttPref2Table following the RowStatus textual convention.
cgsccpGttPref2Table	1.3.6.1.4.1.9.9.335.1.10.1		not-accessible	A table of SCCP GTT Prefix Conversion Table entries. This table replaces the cgsccpGttPrefTable tables and allow prefix conversion to be specified per instance. When a packet with GTA is received, it may need global title translation depending on Translation Type (TT), Numbering Plan (NP), Network Address Indicator (NAI) and Global Title Indicator (GTI) present in the packet. To perform the translation a selector (cgsccpGttSelTable) corresponding to TT, NP, NAI and GTI is used. The selector also specifies prefix conversion of the GTA before (pre) performing the global title translation or after (post) performing the global title translation. A selector can specify any or both (pre and post) prefix conversion tables. The prefix conversion involves matching of GTA digits in the cgsccpGttPref2InAddr and then replacing those digits with the digits in cgsccpGttPref2OutAddr.
cgsccpGttPref2TableEntry	1.3.6.1.4.1.9.9.335.1.10.1.1		not-accessible	A list of SCCP GTT Prefix Conversion attributes.
CIT cgsccpGttPref2TblNAI	1.3.6.1.4.1.9.9.335.1.10.1.1.4	CItpTcNAI	read-create	Nature of Address Indicator (NAI) for the Prefix Conversion Table.
CIT cgsccpGttPref2TblNP	1.3.6.1.4.1.9.9.335.1.10.1.1.5	CItpTcNumberingPlan	read-create	Numbering Plan (NP) for the Prefix Conversion Table.
CIT cgsccpGttPrefInAddr	1.3.6.1.4.1.9.9.335.1.8.1.1.2	CItpTcGtaLongAddr	not-accessible	If the GTA of the Called Party Address (CDPA) matches the digits in this object, then the prefix conversion is performed.
CIT cgsccpGttPrefItemNAI	1.3.6.1.4.1.9.9.335.1.8.1.1.6	CItpTcNAI	read-create	Nature of Address Indicator (NAI) for the current item in this Prefix Conversion Table.
CIT cgsccpGttPrefItemNP	1.3.6.1.4.1.9.9.335.1.8.1.1.7	CItpTcNumberingPlan	read-create	Numbering Plan (NP) for the current item in this Prefix Conversion Table.
CGS cgsccpGttPrefName	1.3.6.1.4.1.9.9.335.1.8.1.1.1	CgsccpGttPrefName	not-accessible	The GTT Prefix Conversion table name.
CIT cgsccpGttPrefOutAddr	1.3.6.1.4.1.9.9.335.1.8.1.1.3	CItpTcGtaLongAddr	read-create	If the GTA of the Called Party Address (CDPA) matches the digits in cgsccpGttPrefInAddr then this object is used in the prefix conversion.
ROW cgsccpGttPrefRowStatus	1.3.6.1.4.1.9.9.335.1.8.1.1.8	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cgsccpGttPrefTable following the RowStatus textual convention.
cgsccpGttPrefTable	1.3.6.1.4.1.9.9.335.1.8.1		not-accessible	A table of SCCP GTT Prefix Conversion Table entries. When a packet with GTA is received, it may need global title translation depending on Translation Type (TT), Numbering Plan (NP), Network Address Indicator (NAI) and Global Title Indicator (GTI) present in the packet. To perform the translation a selector (cgsccpGttSelTable) corresponding to TT, NP, NAI and GTI is used. The selector also specifies prefix conversion of the GTA before (pre) performing the global title translation or after (post) performing the global title translation. A selector can specify any or both (pre and post) prefix conversion tables. The prefix conversion involves matching of GTA digits in the cgsccpGttPrefInAddr and then replacing those digits with the digits in cgsccpGttPrefOutAddr.
cgsccpGttPrefTableEntry	1.3.6.1.4.1.9.9.335.1.8.1.1		not-accessible	A list of SCCP GTT Prefix Conversion attributes.
CIT cgsccpGttPrefTblNAI	1.3.6.1.4.1.9.9.335.1.8.1.1.4	CItpTcNAI	read-create	Nature of Address Indicator (NAI) for the Prefix Conversion Table.
CIT cgsccpGttPrefTblNP	1.3.6.1.4.1.9.9.335.1.8.1.1.5	CItpTcNumberingPlan	read-create	Numbering Plan (NP) for the Prefix Conversion Table.
C32 cgsccpGttQ752T7E2	1.3.6.1.4.1.9.9.335.1.5.1.1.7	Counter32	read-only	This counter is incremented every time a global title title translations was required and a selector was not found.
cgsccpGttSel	1.3.6.1.4.1.9.9.335.1.5
CGS cgsccpGttSelGTI	1.3.6.1.4.1.9.9.335.1.5.1.1.4	CgsccpGttGlobalTitleInd	not-accessible	Global Title Indicator (GTI) for this GTT Selector.
CIT cgsccpGttSelNAI	1.3.6.1.4.1.9.9.335.1.5.1.1.2	CItpTcNAI	not-accessible	Nature of Address Indicator (NAI) for GTT Selector.
CGS cgsccpGttSelName	1.3.6.1.4.1.9.9.335.1.5.1.1.5	CgsccpGttSelName	read-create	The name of the GTT selector.
CIT cgsccpGttSelNP	1.3.6.1.4.1.9.9.335.1.5.1.1.3	CItpTcNumberingPlan	not-accessible	Numbering Plan (NP) for this GTT Selector.
C32 cgsccpGttSelNumPerf	1.3.6.1.4.1.9.9.335.1.5.1.1.6	Counter32	read-only	This counter is incremented every time a global title translations is performed using this GTT Selector.
CGS cgsccpGttSelPostPrefConv	1.3.6.1.4.1.9.9.335.1.5.1.1.11	CgsccpGttPrefName	read-create	The Post Prefix Conversion Table is used to convert GTA digits. This object specifies that the conversion occurs 'after' global title translation. The null string indicates that a post conversion table has not been specified.
CGS cgsccpGttSelPrePrefConv	1.3.6.1.4.1.9.9.335.1.5.1.1.10	CgsccpGttPrefName	read-create	The Prefix Conversion Table is used to convert GTA digits. This object specifies that the conversion occurs 'before' global title translation. The null string indicates that a prefix conversion table has not been specified.
CGS cgsccpGttSelQOS	1.3.6.1.4.1.9.9.335.1.5.1.1.8	CgsccpGttQOS	read-create	The SCCP GTT Selector specifies the QOS.
G32 cgsccpGttSelRefCount	1.3.6.1.4.1.9.9.335.1.5.1.1.9	Gauge32	read-only	The number of entries in the global title addresses that belong to this selector.
ROW cgsccpGttSelRowStatus	1.3.6.1.4.1.9.9.335.1.5.1.1.12	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cgsccpGttSelTable following the RowStatus textual convention.
cgsccpGttSelTable	1.3.6.1.4.1.9.9.335.1.5.1		not-accessible	A table of SCCP GTT Selector entries.
cgsccpGttSelTableEntry	1.3.6.1.4.1.9.9.335.1.5.1.1		not-accessible	A list of SCCP GTT Selector attributes.
CGS cgsccpGttSelTT	1.3.6.1.4.1.9.9.335.1.5.1.1.1	CgsccpGttTransType	not-accessible	Translation Type (TT) for this GTT Selector.
T/F cgsccpGttTransErrorsNotifEnabled	1.3.6.1.4.1.9.9.335.1.1.5	TruthValue	read-write	The global title translation errors notification truth value as follows. 'true' Indicates that the ciscoGsccpGttErrors notification is to be generated when the a configuration is loaded. That is, the notification generation is enabled. 'false' Indicates that the ciscoGsccpGttErrors notification generation is disabled.
cgsccpGttTranslate	1.3.6.1.4.1.9.9.335.1.9
U32 cgsccpGttTranslateEntry	1.3.6.1.4.1.9.9.335.1.9.1.1.2	Unsigned32	not-accessible	The entry number. Each entry represents a period of time as specified by the cgsccpGttTranslatePeriod object. The entries are ordered from old to new.
U32 cgsccpGttTranslatePeriod	1.3.6.1.4.1.9.9.335.1.1.2	Unsigned32	read-write	The length of the period used to collect the maximum Global Title Translations rate. Samples are calculated for the time period specified by the cgsccpGttTranslateSample object.
ENT cgsccpGttTranslatePhysicalIndex	1.3.6.1.4.1.9.9.335.1.9.1.1.5	EntPhysicalIndexOrZero	read-only	The entPhysicalIndex of the physical entity for which the statistics in this entry are maintained. The physical entity can be a CPU chip, a group of CPUs, a CPU card etc. The exact type of this entity is described by its entPhysicalVendorType value. If the CPU statistics in this entry correspond to more than one physical entity (or to no physical entity), or if the entPhysicalTable is not supported on the SNMP agent, the value of this object must be zero.
G32 cgsccpGttTranslateRate	1.3.6.1.4.1.9.9.335.1.9.1.1.3	Gauge32	read-only	During each interval the rate of global title translations is calculated every second. This object is the highest rate of global title translation encountered in the interval specified by the cgsccpGttTranslatePeriod object.
U32 cgsccpGttTranslateSample	1.3.6.1.4.1.9.9.335.1.1.1	Unsigned32	read-write	The length of the sample interval used to collect number of maximum Global Title Translations per second.
U32 cgsccpGttTranslateSlot	1.3.6.1.4.1.9.9.335.1.9.1.1.1	Unsigned32	not-accessible	The slot number containing the CPU that is performing Global Title translation.
cgsccpGttTranslateTable	1.3.6.1.4.1.9.9.335.1.9.1		not-accessible	The translate table contains a history of the number of global title packets that were translated on the various processors enabled for this function. The ability to translate GTT is critical to many SS7 functions. This table provides peak utilization to allow planning of maximum load on SS7 network.
cgsccpGttTranslateTableEntry	1.3.6.1.4.1.9.9.335.1.9.1.1		not-accessible	A list of global title translate statistics.
TIM cgsccpGttTranslateTS	1.3.6.1.4.1.9.9.335.1.9.1.1.4	TimeStamp	read-only	This timestamp indicates when time period ended for this sample.
cgsccpInst	1.3.6.1.4.1.9.9.335.1.2
G32 cgsccpInstAppGrTableEntries	1.3.6.1.4.1.9.9.335.1.2.1.1.39	Gauge32	read-only	The number of entries in the cgsccpGttAppGrTable Table for this instance. Or in other words, the number of GTT Application Group Table entries for this signalling point.
TIM cgsccpInstConfigTS	1.3.6.1.4.1.9.9.335.1.2.1.1.32	TimeStamp	read-only	The value of sysUpTime at the time of the last creation or deletion or modification of an entry in the cgsccpGttConPcTable, cgsccpGttMapTable, cgsccpGttSelTable, cgsccpGttGtaTable, cgsccpGttAppGr2Table, or cgsccpGttPref2Table. If the local network management subsystem is re-initialization, then this object contains the sysUpTime at the time when this occurred. This value can be used to prevent unnecessary walks of the these tables.
G32 cgsccpInstConPcTableEntries	1.3.6.1.4.1.9.9.335.1.2.1.1.35	Gauge32	read-only	The number of entries in the cgsccpGttConPcTable Table for this instance. Or in other words, the number concerned point-code entries for this signalling point.
C32 cgsccpInstCrefFromMtp	1.3.6.1.4.1.9.9.335.1.2.1.1.21	Counter32	read-only	This counter is incremented every time a Connection Refusal (CREF) message is received from MTP (Q752/9 bis.8).
C32 cgsccpInstCrefToMtp	1.3.6.1.4.1.9.9.335.1.2.1.1.19	Counter32	read-only	This counter is incremented every time a Connection Refusal (CREF) message is sent to MTP (Q752/9 bis.6).
C32 cgsccpInstCrFromMtp	1.3.6.1.4.1.9.9.335.1.2.1.1.20	Counter32	read-only	This counter is incremented every time a Connection Request messages received from MTP. This count includes ISDN- UP with embedded CRs (Q752/9 bis.7).
C32 cgsccpInstCrToMtp	1.3.6.1.4.1.9.9.335.1.2.1.1.18	Counter32	read-only	This counter is incremented every time a Connection Request(CR) messages sent to MTP. This count include ISDN-UP with embedded CRs (Q752/9 bis.5).
C32 cgsccpInstErrFromMtp	1.3.6.1.4.1.9.9.335.1.2.1.1.25	Counter32	read-only	This counter is incremented every time a Error Message (ERR) message is received from MTP (Q752/9 bis.12).
T/F cgsccpInstErrorIndicator	1.3.6.1.4.1.9.9.335.1.2.1.1.43	TruthValue	read-only	This object indicates whether global title translation errors have occurred in last interval specified by the cgsccpGttErrorPeriod object.
C32 cgsccpInstErrToMtp	1.3.6.1.4.1.9.9.335.1.2.1.1.24	Counter32	read-only	This counter is incremented every time a Error Message (ERR) message is sent to MTP (Q752/9 bis.11).
G32 cgsccpInstGtaTableEntries	1.3.6.1.4.1.9.9.335.1.2.1.1.37	Gauge32	read-only	The number of entries in the cgsccpGttGtaTable Table for this instance. Or in other words, the number of GTT Global Title Address Table entries for this signalling point.
CIT cgsccpInstGttConfigStatus	1.3.6.1.4.1.9.9.335.1.2.1.1.31	CItpTcTableLoadStatus	read-only	The status of the current load or status from the prior load operation.
TIM cgsccpInstGttConfigTS	1.3.6.1.4.1.9.9.335.1.2.1.1.33	TimeStamp	read-only	The value of sysUpTime at the time of the last load of the GTT table using file format.
C32 cgsccpInstInvalidGttFormat	1.3.6.1.4.1.9.9.335.1.2.1.1.27	Counter32	read-only	This counter is incremented every time an invalid Global Title format is found while performing the global title translation. This counter provides information related to the Q752 table 7 entry 8 measurement indicating syntax error detected in MSU
CIT cgsccpInstLastURL	1.3.6.1.4.1.9.9.335.1.2.1.1.34	CItpTcURL	read-only	The URL used to load GTT tables.
C32 cgsccpInstLocalMsgs	1.3.6.1.4.1.9.9.335.1.2.1.1.2	Counter32	read-only	This counter is incremented every time a message is handled from a local subsystem(Q752/9.4).
C32 cgsccpInstLUDTMsgsRcvd	1.3.6.1.4.1.9.9.335.1.2.1.1.16	Counter32	read-only	This counter is incremented every time a long unitdata (LUDT) message is received (Q752/9 bis.19).
C32 cgsccpInstLUDTMsgsSent	1.3.6.1.4.1.9.9.335.1.2.1.1.14	Counter32	read-only	This counter is incremented every time a long unitdata (LUDT) message is sent (Q752/9 bis.17).
C32 cgsccpInstLUDTSMsgsRcvd	1.3.6.1.4.1.9.9.335.1.2.1.1.17	Counter32	read-only	This counter is incremented every time a long unitdata (LUDT) service message is received (Q752/9 bis.20).
C32 cgsccpInstLUDTSMsgsSent	1.3.6.1.4.1.9.9.335.1.2.1.1.15	Counter32	read-only	This counter is incremented every time a long unitdata (LUDT) service message is sent (Q752/9 bis.18).
C32 cgsccpInstMapNotFound	1.3.6.1.4.1.9.9.335.1.2.1.1.29	Counter32	read-only	This counter is incremented every time a global title translation is successful to a certain PC/SSN but it was not found in the GTT Mated Application table.
G32 cgsccpInstMapTableEntries	1.3.6.1.4.1.9.9.335.1.2.1.1.36	Gauge32	read-only	The number of entries in the cgsccpGttMapTable Table for this instance. Or in other words, the number of GTT Mated Application entries for this signalling point.
G32 cgsccpInstPrefTableEntries	1.3.6.1.4.1.9.9.335.1.2.1.1.41	Gauge32	read-only	The number of entries in the cgsccpGttPref2Table Table for this instance. Or in other words, the number of GTT prefix conversion table entries for this signalling point.
C32 cgsccpInstQ752T7E1	1.3.6.1.4.1.9.9.335.1.2.1.1.26	Counter32	read-only	This counter is incremented every time a translation was requested for a combination of Translation Type, Numbering Plan and Nature of Address for which no translation exists in the signalling point. This occurs when no selector is available for the combination of parameters provided in the MSU.
C32 cgsccpInstQ752T7E13	1.3.6.1.4.1.9.9.335.1.2.1.1.28	Counter32	read-only	This counter is incremented every time a hop count violation is found in the MSU.
C32 cgsccpInstQ752T7E7	1.3.6.1.4.1.9.9.335.1.2.1.1.30	Counter32	read-only	This counter is incremented every time a global title translation could not be performed due to an unequipped subsystem (SS).
C32 cgsccpInstQ752Unqualified	1.3.6.1.4.1.9.9.335.1.2.1.1.42	Counter32	read-only	This counter is incremented every time a global title translation is unsuccessful and the error type not covered by other specific error types.
C32 cgsccpInstReassFail	1.3.6.1.4.1.9.9.335.1.2.1.1.45	Counter32	read-only	This counter is incremented every time a SCCP message is dropped due to a reassembly failure at this instance.
C32 cgsccpInstReassUnsup	1.3.6.1.4.1.9.9.335.1.2.1.1.44	Counter32	read-only	This counter is incremented every time a SCCP message is dropped due to an unsupported reassembly feature at this instance.
ROW cgsccpInstRowStatus	1.3.6.1.4.1.9.9.335.1.2.1.1.40	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cgsccpInstTable following the RowStatus textual convention.
C32 cgsccpInstRsrFromMtp	1.3.6.1.4.1.9.9.335.1.2.1.1.23	Counter32	read-only	This counter is incremented every time a Reset Request (RSR) message is received from MTP (Q752/9 bis.10).
C32 cgsccpInstRsrToMtp	1.3.6.1.4.1.9.9.335.1.2.1.1.22	Counter32	read-only	This counter is incremented every time a Reset Request (RSR) message is sent to MTP (Q752/9 bis.9).
C32 cgsccpInstSegFail	1.3.6.1.4.1.9.9.335.1.2.1.1.47	Counter32	read-only	This counter is incremented every time a SCCP message is dropped due to a segmentation failure at this instance.
C32 cgsccpInstSegUnsup	1.3.6.1.4.1.9.9.335.1.2.1.1.46	Counter32	read-only	This counter is incremented every time a SCCP message is dropped due to an unsupported segmentation feature at this instance.
G32 cgsccpInstSelTableEntries	1.3.6.1.4.1.9.9.335.1.2.1.1.38	Gauge32	read-only	The number of entries in the cgsccpGttSelTable Table for this instance. Or in other words, the number of GTT Selector Table entries for this signalling point.
cgsccpInstTable	1.3.6.1.4.1.9.9.335.1.2.1		not-accessible	SCCP information per instance of signalling point.
cgsccpInstTableEntry	1.3.6.1.4.1.9.9.335.1.2.1.1		not-accessible	Global Title information per instance of signalling point.
C32 cgsccpInstTotalGttMsgs	1.3.6.1.4.1.9.9.335.1.2.1.1.3	Counter32	read-only	This counter is incremented every time a message requiring global title translation (Q752/9.5) is handled.
C32 cgsccpInstTotalMsgsEx	1.3.6.1.4.1.9.9.335.1.2.1.1.1	Counter32	read-only	This counter is incremented every time a message is handled from a local or remote subsystem(Q752/9.3).
C32 cgsccpInstUDTMsgsRcvd	1.3.6.1.4.1.9.9.335.1.2.1.1.7	Counter32	read-only	This counter is incremented every time a unitdata (UDT) message is received (Q752/9 bis.3).
C32 cgsccpInstUDTMsgsSent	1.3.6.1.4.1.9.9.335.1.2.1.1.4	Counter32	read-only	This counter is incremented every time a unitdata (UDT) message is sent (Q752/9 bis.1).
C32 cgsccpInstUDTSMsgsAttempted	1.3.6.1.4.1.9.9.335.1.2.1.1.6	Counter32	read-only	This counter is incremented every time a unitdata service (UDTS) message attempted, but may or may not be sent. The actual number of unitdata service (UDTS) message sent is reflected in the cgsccpInstUDTSMsgsSent object.
C32 cgsccpInstUDTSMsgsRcvd	1.3.6.1.4.1.9.9.335.1.2.1.1.8	Counter32	read-only	This counter is incremented every time a unitdata service (UDTS) message is received (Q752/9 bis.4).
C32 cgsccpInstUDTSMsgsSent	1.3.6.1.4.1.9.9.335.1.2.1.1.5	Counter32	read-only	This counter is incremented every time a unitdata service (UDTS) message is sent (Q752/9 bis.2).
C32 cgsccpInstXUDTMsgsRcvd	1.3.6.1.4.1.9.9.335.1.2.1.1.12	Counter32	read-only	This counter is incremented every time a extended unitdata (XUDT) message is received (Q752/9 bis.15).
C32 cgsccpInstXUDTMsgsSent	1.3.6.1.4.1.9.9.335.1.2.1.1.9	Counter32	read-only	This counter is incremented every time an extended unitdata (XUDT) message is sent (Q752/9 bis.13).
C32 cgsccpInstXUDTSMsgsAttempted	1.3.6.1.4.1.9.9.335.1.2.1.1.10	Counter32	read-only	This counter is incremented every time an extended unitdata service (XUDTS) message attempted, but may or may not be sent. The actual number of extended unitdata service (UDTS) message sent is reflected in the cgsccpInstXUDTMsgsSent object.
C32 cgsccpInstXUDTSMsgsRcvd	1.3.6.1.4.1.9.9.335.1.2.1.1.13	Counter32	read-only	This counter is incremented every time a extended unitdata service (XUDTS) message is received (Q752/9 bis.16).
C32 cgsccpInstXUDTSMsgsSent	1.3.6.1.4.1.9.9.335.1.2.1.1.11	Counter32	read-only	This counter is incremented every time an extended unitdata service (XUDTS) message is sent (Q752/9 bis.14).
U32 cgsccpLocalDisplaySS	1.3.6.1.4.1.9.9.335.1.15.1	Unsigned32	accessible-for-notify	Local subsystem in display format.
CGS cgsccpLocalSsStatus	1.3.6.1.4.1.9.9.335.1.15.2	CgsccpGttMapSsStatus	accessible-for-notify	Local subsystem status.
cgsccpNotificationsInfo	1.3.6.1.4.1.9.9.335.1.15
cgsccpScalars	1.3.6.1.4.1.9.9.335.1.1
CIT cgsccpSSN	1.3.6.1.4.1.9.9.335.1.13.1.1.1	CItpTcSubSystemNumber	not-accessible	The SCCP subsystem number.
cgsccpSSNClassEntry	1.3.6.1.4.1.9.9.335.1.14.1.1		not-accessible	Each table entry represents a specific class and subsystem number(SSN).
C32 cgsccpSSNClassLUDTMsgsRcvd	1.3.6.1.4.1.9.9.335.1.14.1.1.7	Counter32	read-only	This counter is incremented every time a long unitdata (LUDT) message is received for this SCCP class and SSN (Q752/9.7).
C32 cgsccpSSNClassLUDTMsgsSent	1.3.6.1.4.1.9.9.335.1.14.1.1.6	Counter32	read-only	This counter is incremented every time a long unitdata (LUDT) message is sent for this SCCP class and SSN (Q752/9.6).
cgsccpSSNClassTable	1.3.6.1.4.1.9.9.335.1.14.1		not-accessible	The SSN Class table contains information about the number of UDT, XUDT, LUDT messages originated and terminated for a specific SSN and class. This provides the granularity of information required by Q752 elements 9.6 and 9.7
C32 cgsccpSSNClassUDTMsgsRcvd	1.3.6.1.4.1.9.9.335.1.14.1.1.3	Counter32	read-only	This counter is incremented every time a unitdata (UDT) message is received for this SCCP class and SSN(Q752/9.7).
C32 cgsccpSSNClassUDTMsgsSent	1.3.6.1.4.1.9.9.335.1.14.1.1.2	Counter32	read-only	This counter is incremented every time a unitdata (UDT) message is sent for this SCCP class and SSN(Q752/9.6).
C32 cgsccpSSNClassXUDTMsgsRcvd	1.3.6.1.4.1.9.9.335.1.14.1.1.5	Counter32	read-only	This counter is incremented every time an extended unitdata (XUDT) message is received for this SCCP class and SSN (Q752/9.7).
C32 cgsccpSSNClassXUDTMsgsSent	1.3.6.1.4.1.9.9.335.1.14.1.1.4	Counter32	read-only	This counter is incremented every time an extended unitdata (XUDT) message is sent for this SCCP class and SSN (Q752/9.6).
cgsccpSSNEntry	1.3.6.1.4.1.9.9.335.1.13.1.1		not-accessible	Each table entry represents a specific local subsystem number(SSN).
C32 cgsccpSSNNumAllows	1.3.6.1.4.1.9.9.335.1.13.1.1.3	Counter32	read-only	This counter is incremented every time this local subsystem transitions to allowed state at this instance (Q752/8.10).
C32 cgsccpSSNNumProhibits	1.3.6.1.4.1.9.9.335.1.13.1.1.2	Counter32	read-only	This counter is incremented every time this local subsystem transitions to prohibit state at this instance (Q752/8.9).
cgsccpSSNTable	1.3.6.1.4.1.9.9.335.1.13.1		not-accessible	The SSN table provides a breakdown of SCCP measurements at local subsystem level.
ciscoGsccpGlobalEntryGroup	1.3.6.1.4.1.9.9.335.2.2.1			Gateway SCCP Scalar objects.
ciscoGsccpGlobalEntryGroupRev1	1.3.6.1.4.1.9.9.335.2.2.12			Gateway SCCP Scalar objects.
ciscoGsccpGlobalEntryGroupSup1	1.3.6.1.4.1.9.9.335.2.2.19			SCCP translation physical index.
ciscoGsccpGttAppGroup	1.3.6.1.4.1.9.9.335.2.2.4			SCCP GTT Application Group objects.
ciscoGsccpGttAppGroupRev2	1.3.6.1.4.1.9.9.335.2.2.13			SCCP GTT Application Group objects.
ciscoGsccpGttAppGroupRev3	1.3.6.1.4.1.9.9.335.2.2.15			SCCP GTT Application Group objects.
ciscoGsccpGttConPcGroup	1.3.6.1.4.1.9.9.335.2.2.3			SCCP Concerned Point Code objects.
NTF ciscoGsccpGttErrors	1.3.6.1.4.1.9.9.335.0.3			This notification is generated whenever any global title error is encountered in last interval specified by the cgsccpGttErrorPeriod and the cgsccpInstErrorIndicator will be set to true. The notification will also be generated when errors have abated. The notification is generated after the number of recovery intervals as specified by the cgsccpGttErrorRecoveryCount object has passed without any global title errors.
ciscoGsccpGttErrorsGroup	1.3.6.1.4.1.9.9.335.2.2.17			SCCP GTT Application Group objects.
ciscoGsccpGttErrorsGroupSup1	1.3.6.1.4.1.9.9.335.2.2.22			SCCP GTT additional error objects.
ciscoGsccpGttGtaGroup	1.3.6.1.4.1.9.9.335.2.2.7			SCCP GTT Global Title Address objects.
ciscoGsccpGttGtaGroupRev2	1.3.6.1.4.1.9.9.335.2.2.14			SCCP GTT Global Title Address objects.
NTF ciscoGsccpGttLoadTable	1.3.6.1.4.1.9.9.335.0.2			This notification is generated whenever a load operation is started or completes.
ciscoGsccpGttMapGroup	1.3.6.1.4.1.9.9.335.2.2.5			SCCP GTT Mated Application objects.
ciscoGsccpGttMapGroupSup1	1.3.6.1.4.1.9.9.335.2.2.21			SCCP GTT Mated Application additional objects.
NTF ciscoGsccpGttMapStateChange	1.3.6.1.4.1.9.9.335.0.1			The notification generated when a mated application subsystem changes to a new state. The value of cgsccpGttMapSsStatus indicates the new state for the subsystem.
ciscoGsccpGttPrefGroup	1.3.6.1.4.1.9.9.335.2.2.8			SCCP GTT Prefix Conversion Table objects.
ciscoGsccpGttPrefGroupRev1	1.3.6.1.4.1.9.9.335.2.2.10			SCCP GTT Prefix Conversion Table objects.
ciscoGsccpGttPrefGroupSup1	1.3.6.1.4.1.9.9.335.2.2.18			SCCP GTT additional prefix conversion objects.
ciscoGsccpGttSelGroup	1.3.6.1.4.1.9.9.335.2.2.6			SCCP GTT Selector objects.
ciscoGsccpGttSelGroupSup1	1.3.6.1.4.1.9.9.335.2.2.27			SCCP GTT selector table additional objects.
ciscoGsccpGttSsnClassGroup	1.3.6.1.4.1.9.9.335.2.2.24			SCCP SSN Class measurement objects.
ciscoGsccpGttSsnGroup	1.3.6.1.4.1.9.9.335.2.2.23			SCCP SSN measurement objects.
ciscoGsccpInstTableEntryGroup	1.3.6.1.4.1.9.9.335.2.2.2			SCCP main objects.
ciscoGsccpInstTableEntryGroupRev1	1.3.6.1.4.1.9.9.335.2.2.11			SCCP main objects.
ciscoGsccpInstTableEntryGroupSup1	1.3.6.1.4.1.9.9.335.2.2.20			SCCP Instance table additional objects.
NTF ciscoGsccpLocalSsStateChange	1.3.6.1.4.1.9.9.335.0.7			The notification generated when a local application subsystem changes to a new state. The subsystem number and the latest subsystem state will be provided in this notification.
ciscoGsccpMIB	1.3.6.1.4.1.9.9.335			The MIB for signalling Connection Control Part(SCCP) messages transported over Signalling System No. 7 (SS7) Network via Cisco IP Transfer Point. This MIB provides information specified in ITU Q752 Monitoring and Measurements for Signalling System No. 7(SS7) Network. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 Signalling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7. The IETF Working Group Signalling Transport (SIGTRAN) has defined MTP3 User Adaptation (M3UA) and SCCP User Adaptation (SUA) protocols. The drafts can be found at: http://www.ietf.org/html.charters/sigtran-charter.html This MIB consists of the following tables: Instance Table Concerned Point Code List Table Mated Application (MAP) Table Global Title Translation (GTT) Selector Table Global Title Address (GTA) Table Application Group Table Prefix Conversion Table Translation Entries Table Global Title Errors Table Abbreviations: CDPA - Called Party Address CGPA - Calling Party Address CLLI - Common Language Location Codes CR - Connection Request message CREF - Connection Refusal message DPC - Destination Point Code ERR - Error message GTA - Global Title Address GTI - Global Title Indicator GTT - Global Title Translation LUDT - long unitdata message LUDTS - long unitdata service message M2PA - MTP2 Peer-to-Peer Adaptation Layer M3UA - MTP3-User Adaptation MAP - Mated Application Table MSU - Message Signal Unit MTP - Message Transport Protocol MTP2 - Layer 2 of Message Transport Protocol MTP3 - Layer 3 of Message Transport Protocol NAI - Nature of Address Indicator NP - Numbering Plan OPC - Originating Point Code PC - Point Code RTN - Route Table Name RSR - Reset Request message SCCP - Signalling Connection Control Part SCTP - Stream Transmission Protocol(RFC 2960) SI - Signalling Indicator SP - Signalling Point SLC - Signalling Link Code SLS - Signalling Link Selector SSN - Subsystem Number SUA - SCCP-User Adaptation TFR - Transfer Restricted messages TT - Title Translation UDT - unitdata message UDTS - unitdata service message XUDT - extended unitdata message XUDTS - extended unitdata service message
ciscoGsccpMIBCompliance	1.3.6.1.4.1.9.9.335.2.1.1			The compliance statement for entities which implement the CISCO-ITP-GSCCP-MIB.my MIB
ciscoGsccpMIBComplianceRev1	1.3.6.1.4.1.9.9.335.2.1.2			The compliance statement for entities which implement the CISCO-ITP-GSCCP-MIB.my MIB
ciscoGsccpMIBComplianceRev2	1.3.6.1.4.1.9.9.335.2.1.3			The compliance statement for entities which implement the CISCO-ITP-GSCCP-MIB.my MIB
ciscoGsccpMIBComplianceRev3	1.3.6.1.4.1.9.9.335.2.1.4			The compliance statement for entities which implement the CISCO-ITP-GSCCP-MIB.my MIB
ciscoGsccpMIBComplianceRev4	1.3.6.1.4.1.9.9.335.2.1.5			The compliance statement for entities which implement the CISCO-ITP-GSCCP-MIB.my MIB
ciscoGsccpMIBComplianceRev5	1.3.6.1.4.1.9.9.335.2.1.6			The compliance statement for entities which implement the CISCO-ITP-GSCCP-MIB.my MIB
ciscoGsccpMIBComplianceRev6	1.3.6.1.4.1.9.9.335.2.1.7			The compliance statement for entities which implement the CISCO-ITP-GSCCP-MIB.my MIB
ciscoGsccpMIBComplianceRev7	1.3.6.1.4.1.9.9.335.2.1.8			The compliance statement for entities which implement the CISCO-ITP-GSCCP-MIB.my MIB.
ciscoGsccpMIBCompliances	1.3.6.1.4.1.9.9.335.2.1
ciscoGsccpMIBConform	1.3.6.1.4.1.9.9.335.2
ciscoGsccpMIBGroups	1.3.6.1.4.1.9.9.335.2.2
ciscoGsccpMIBNotifs	1.3.6.1.4.1.9.9.335.0
ciscoGsccpMIBObjects	1.3.6.1.4.1.9.9.335.1
ciscoGsccpNotificationsGroup	1.3.6.1.4.1.9.9.335.2.2.9			SCCP notification objects.
ciscoGsccpNotificationsGroupSup1	1.3.6.1.4.1.9.9.335.2.2.16			SCCP Error notification objects.
ciscoGsccpNotificationsGroupSup2	1.3.6.1.4.1.9.9.335.2.2.26			SCCP additional notification objects.
ciscoGsccpNotificationsInfoGroup	1.3.6.1.4.1.9.9.335.2.2.25			SCCP notification information objects.
NTF ciscoGsccpRmtCongestion	1.3.6.1.4.1.9.9.335.0.6			This notification is generated initially when congestion is experienced in the remote SCCP component for the first time in last interval specified by the cgsccpGttErrorPeriod. The notification is generated after the number of recovery intervals as specified by the cgsccpGttErrorRecoveryCount object has passed without any congestion errors and total number of local congestion observed for different congestion levels at the end of the interval along with the latest known congestion status for that remote signalling point will be provided.
NTF ciscoGsccpSegReassUnsup	1.3.6.1.4.1.9.9.335.0.4			This notification is generated initially when a SCCP message is dropped due to a segmentation or reassembly unsupported or failure errors in last interval specified by the cgsccpGttErrorPeriod and the cgsccpInstErrorIndicator will be set to true. The notification will also be generated after the number of recovery intervals as specified by the cgsccpGttErrorRecoveryCount object has passed without any segmentation or reassembly unsupported errors.
NTF ciscoGsccpSOGReceived	1.3.6.1.4.1.9.9.335.0.5			This notification is generated initially when a Subsystem Out-of-Service Grant is sent in response to a Subsystem Out-of-Service Request message. The affected PC and affected SSN are provided with this notification.

RFC description

SS7 SCCP (Signalling Connection Control Part) message monitoring over IP Transfer Point, supporting telecommunications signaling.

Start monitoring Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-ITP-GSCCP-MIB