| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoSanTapMIB | 1.3.6.1.4.1.9.9.463 | | | MIB module to provide information about the SanTap
service configuration.
SanTap is a fibre channel switch based capability that
provides a reliable copy of the data flowing between
a set of one or more initiators and a set of one or
more targets connected to the fabric.
Adminstrator must configure the switch to create the
Control Virtual Target (CVT) for the SanTap service.
CVTs are used to implement the control path which process
all SanTap service requests sent out by an appliance.
Prior to requesting for SanTap service the appliance
contacts the CVT, specifies the initiator and the target
for replicating the data flowing between them.
This MIB provides an interface to configure the CVT for
the SanTap service on the fibre channel switch modules.
Glossary of terms used in this MIB:
Fabric - The set of physically connected fibre channel
switches.
VSAN - Virtual Storage Area Network, similar to a
Virtual Fabric as defined by T11.
WWN - World Wide Name. Mechanism of uniquely
identifying the devices in Fibre Channel
Networks.
Appliance - It is a storage target, which can
requests the SanTap service for the reliable
copy of the data flowing between a specific
host initiator and a target.
CVT - Control Virtual Target. It is a logical target
port that resides on the switch and is used
for the purpose of communicating control traffic
from an appliance.
DVT - Data Virtual Target. It is a logical target port
that resides on the switch and is used to intercept
traffic meant for a real target. |
| ciscoSanTapMIBObjects | 1.3.6.1.4.1.9.9.463.1 | | | |
| cstModuleTable | 1.3.6.1.4.1.9.9.463.1.1 | | not-accessible | A table listing the modules on which SanTap service can
be configured and CVT can be created by the user.
The entry in the cstServiceConfigTable can only be
created on a module present in the cstModuleTable. |
| cstModuleEntry | 1.3.6.1.4.1.9.9.463.1.1.1 | | not-accessible | An entry in this table.
The cstModuleId denotes the entPhysicalIndex of the
module on which SanTap service can be configured. |
| PHY cstModuleId | 1.3.6.1.4.1.9.9.463.1.1.1.1 | PhysicalIndex | read-only | This object specifies the physical index of the entity
with entPhysicalClass as 'module' on which SanTap service
can be configured by the user.
This is same as the entPhysicalIndex of the module. |
| cstServiceConfigTable | 1.3.6.1.4.1.9.9.463.1.2 | | not-accessible | This table provides information about the list of
all CVTs created and configured in the system.
A new entry creation in this table, creates a CVT on the
module specified by the corresponding instance index
'cstModuleId' and configures the CVT on the VSAN
specified by the corresponding instance index 'vsanIndex'.
A row creation in this table, with an existing
module physical index but different 'vsanIndex'
configures the already created CVT on the module into
VSAN specified by the 'vsanIndex'.
Deleting an entry from this table, unconfigures the
CVT created on the module specified by the corresponding
instance index 'cstModuleId' on the VSAN represented
by the corresponding instance index 'vsanIndex'. If there
are no more entries in this table for this module then
the CVT will be deleted from the corresponding module.
For example, If there is no entry in this table for a
module pysical Index '22', then a new entry creation
with cstModuleId '22' vsanIndex 'n1' creates a
CVT on this module and configures the CVT on VSAN 'n1'.
And a new row is created in this table.
Any subsequent entry creation with cstModuleId '22'
vsanIndex 'n2' only configures the previously created
CVT on vsan 'n2' and a new row is created in this table.
Similarly for any delete request with cstModuleId '22'
vsanIndex 'n1'/'n2' unconfigures the CVT created on the
vsan 'n1'/'n2' and the corresponding row is deleted from
the table.
If there is only one entry with cstModuleId '22'
and vsan 'n' exists in the table, then any delete request
with cstModuleId '22' vsan 'n' unconfigures the CVT on
vsan 'n' and deletes the CVT. The corresponding row is
deleted from the table. |
| cstServiceConfigEntry | 1.3.6.1.4.1.9.9.463.1.2.1 | | not-accessible | An entry containing information about a CVT configuration
for the SanTap service.
The 'cstModuleId' denotes the module on which the user
wants the SanTap service to be configured and the CVT to be
created.
The index 'vsanIndex' represents the VSAN on which the
CVT needs to be configured. It represents the VSAN on
which CVT and the appliance communicate to establish the
control path for processing the SanTap service requests. |
| FCN cstCVTNodeWwn | 1.3.6.1.4.1.9.9.463.1.2.1.1 | FcNameIdOrZero | read-only | This object represents the Node World-Wide Name of the
CVT created on the module represented by the corresponding
entity index 'cstModuleId'. |
| FCN cstCVTPortWwn | 1.3.6.1.4.1.9.9.463.1.2.1.2 | FcNameIdOrZero | read-only | This object represents the Port World-Wide Name of the
CVT created on the module represented by the corresponding
entity index 'cstModuleId'. |
| ROW cstServiceConfigRowStatus | 1.3.6.1.4.1.9.9.463.1.2.1.3 | RowStatus | read-create | The status of this conceptual row. |
| STR cstCVTName | 1.3.6.1.4.1.9.9.463.1.2.1.4 | SnmpAdminString | read-create | The administratively assigned name for this CVT. |
| cstDVTConfigTable | 1.3.6.1.4.1.9.9.463.1.3 | | not-accessible | This table provides information about the list of
all DVTs created and configured in the system.
A new entry creation in this table, creates a DVT
corresponding to the target PWWN 'cstDVTPortWwn' on
the VSAN 'vsanIndex'.
Deleting an entry from this table, unconfigures the
DVT corresponding to 'cstDVTPortWwn' from the VSAN
'vsanIndex'.
The index 'vsanIndex' represents the VSAN on which the
DVT needs to be created. The index 'vsanIndex' should
be a known VSAN on the switch.
The index 'cstDVTPortWWN' represents the Port WWN of the
real target for which a corresponding DVT is to be created.
The DVT will have the same Port WWN as the target. The
index 'cstDVTPortWWN' should correspond to a known target
on the switch.
By default no entries exist in the table. |
| cstDVTConfigEntry | 1.3.6.1.4.1.9.9.463.1.3.1 | | not-accessible | An entry containing information about a DVT configuration
for the SanTap service. |
| FCN cstDVTPortWwn | 1.3.6.1.4.1.9.9.463.1.3.1.1 | FcNameId | not-accessible | This object represents the port world-wide name of the
created DVT. It will be the same as the port world-wide
name of the real target for which data is to be replicated. |
| VSA cstDVTTargetVsan | 1.3.6.1.4.1.9.9.463.1.3.1.2 | VsanIndex | read-create | This object represents the VSAN of the real target for
which this DVT is being created.
This object MUST be set to a valid value concurrently
with setting the corresponding instance of cstDVTRowStatus
to 'active'. This object cannot be modified while the value
of the corresponding instance of cstDVTRowStatus is
'active'. |
| NUM cstDVTPort | 1.3.6.1.4.1.9.9.463.1.3.1.3 | InterfaceIndex | read-create | This object represents the port on the module where the
DVT will be created.
This object MUST be set to a valid value concurrently
with setting the corresponding instance of cstDVTRowStatus
to 'active'. This object cannot be modified while the value
of the corresponding instance of cstDVTRowStatus is
'active'. |
| STR cstDVTName | 1.3.6.1.4.1.9.9.463.1.3.1.4 | SnmpAdminString | read-create | The administratively assigned name for this DVT. |
| ROW cstDVTRowStatus | 1.3.6.1.4.1.9.9.463.1.3.1.5 | RowStatus | read-create | The status of this conceptual row. |
| T/F cstDVTLunSizeHandling | 1.3.6.1.4.1.9.9.463.1.3.1.6 | TruthValue | read-create | This object indicates if the DVT should use the
real target LUN size for the virtual LUN or the
max LUN size supported which is 2TB.
A value of false for this object indicates the
real target LUN size should be used. This object
should be set during the DVT creation time and
cannot be modified later. |
| U32 cstDVTIOTimeout | 1.3.6.1.4.1.9.9.463.1.3.1.7 | Unsigned32 | read-create | This object represents the IO timeout value
associated with the DVT. This object should
be set during the DVT creation time and cannot
be modified later. |
| ciscoSanTapMIBConformance | 1.3.6.1.4.1.9.9.463.2 | | | |
| ciscoSanTapMIBCompliances | 1.3.6.1.4.1.9.9.463.2.1 | | | |
| ciscoSanTapMIBCompliance | 1.3.6.1.4.1.9.9.463.2.1.1 | | | Compliance statement for entites which implement
the CISCO SANTAP MIB. |
| ciscoSanTapMIBComplianceRev1 | 1.3.6.1.4.1.9.9.463.2.1.2 | | | Compliance statement for entites which implement
the CISCO SANTAP MIB. |
| ciscoSanTapMIBComplianceRev2 | 1.3.6.1.4.1.9.9.463.2.1.3 | | | Compliance statement for entites which implement
the CISCO SANTAP MIB. |
| ciscoSanTapMIBGroups | 1.3.6.1.4.1.9.9.463.2.2 | | | |
| ciscoSanTapServiceConfigGroup | 1.3.6.1.4.1.9.9.463.2.2.1 | | | A Collection of objects to configure the CVT for SanTap
service. |
| ciscoSanTapServiceConfigGroupRev1 | 1.3.6.1.4.1.9.9.463.2.2.2 | | | A Collection of objects to configure the CVT for SanTap
service. |
| ciscoSanTapDVTConfigGroup | 1.3.6.1.4.1.9.9.463.2.2.3 | | | A Collection of objects to configure the DVT for SanTap
service. |
| ciscoSanTapDVTConfigGroup1 | 1.3.6.1.4.1.9.9.463.2.2.4 | | | A Collection of objects to configure the DVT for SanTap
service. |
| ciscoSanTapNotifications | 1.3.6.1.4.1.9.9.463.3 | | | |
