| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoRadiusMIB | 1.3.6.1.4.1.9.9.288 | | | MIB module for monitoring and configuring
authentication and logging services using RADIUS
(Remote Authentication Dial In User Service) related
objects.
The RADIUS (RFC2865) framework consists of clients and
servers. A client is responsible for passing user
information to designated RADIUS servers, and then
acting on the response which is returned.
RADIUS server is responsible for receiving user
connection requests, authenticating the user, and then
returning all configuration information necessary for
the client to deliver service to the user.
This MIB module also contains objects for
enabling/disabling telnet and SSH (Secure Shell)
authentication. Secure Shell is program which is used
to log into another machine over a secured session. |
| ciscoRadiusMIBObjects | 1.3.6.1.4.1.9.9.288.1 | | | |
| crRadiusGenericConfig | 1.3.6.1.4.1.9.9.288.1.1 | | | |
| BIT crRadiusLoginAuthentication | 1.3.6.1.4.1.9.9.288.1.1.1 | Bits | read-write | The login authentication using RADIUS feature is enabled for
telnet/SSH sessions if the 'telnet (0) ' bit is set, and
disabled if this bit is reset.
The login authentication using RADIUS feature is enabled for
console sessions if the 'console (1) ' bit is set, and
disabled if this bit is reset.
The login authentication using RADIUS feature is enabled for
remote web sessions if the 'http (2) ' bit is set, and
disabled if this bit is reset. |
| NUM crRadiusDeadtime | 1.3.6.1.4.1.9.9.288.1.1.2 | TimeIntervalMin | read-write | Indicates the length of time in minutes that the system will
mark the server dead when a RADIUS server does not respond to
an authentication request. During the interval of the dead
time, any authentication request that comes up would not be
sent to that RADIUS server that was marked as dead. The
default value of 0 means that the RADIUS servers will not be
marked dead if they do not respond. |
| CIS crRadiusAuthKey | 1.3.6.1.4.1.9.9.288.1.1.3 | CiscoRadiusAuthKey | read-write | The key used in encrypting the packets passed between the
RADIUS server and the client. This key must match the one
configured on the server.
A zero-length string is always returned when this object is
read. |
| NUM crRadiusTimeout | 1.3.6.1.4.1.9.9.288.1.1.4 | TimeIntervalSec | read-write | This is the time in seconds between retransmissions to
the RADIUS server. |
| U32 crRadiusRetransmits | 1.3.6.1.4.1.9.9.288.1.1.5 | Unsigned32 | read-write | The additional number of times the RADIUS server should be
tried by the RADIUS client before giving up on the server. |
| U32 crRadiusAccountingLogMaxSize | 1.3.6.1.4.1.9.9.288.1.1.6 | Unsigned32 | read-write | The maximum size of the accounting log file in bytes.
The log file is stored on local persistent storage at the
device. If the size is set to a smaller value than the
existing one, then smaller log will be available for view
by the user. |
| BIT crRadiusAccountingMethod | 1.3.6.1.4.1.9.9.288.1.1.7 | Bits | read-write | The accounting method on the device. If bit 0
is set, the accounting method is RADIUS. If bit 1
is set, then the accounting method is local. It is
possible for the user to set both the bits so that
both the RADIUS as well as local accounting methods
are used. It is also possible to set none of the
methods; in this case the switch will not do any
accounting. |
| crRadiusServerConfig | 1.3.6.1.4.1.9.9.288.1.2 | | | |
| U32 crRadiusServerTableMaxEntries | 1.3.6.1.4.1.9.9.288.1.2.1 | Unsigned32 | read-only | The maximum number of entries that the agent supports in the
crRadiusServerTable. |
| crRadiusServerTable | 1.3.6.1.4.1.9.9.288.1.2.2 | | not-accessible | This table lists RADIUS servers. |
| crRadiusServerEntry | 1.3.6.1.4.1.9.9.288.1.2.2.1 | | not-accessible | A RADIUS server table entry.
Users can add/delete entries in this table using object
'crRadiusServerRowStatus'.
An entry cannot be created until following objects are
instantiated :
- crRadiusServerAddrType
- crRadiusServerAddr
Also, following objects cannot be modified when
'crRadiusServerRowStatus' is 'active' :
- crRadiusServerAddrType
- crRadiusServerAddr
To modify above objects, the entry must be deleted and
re-created with new values of above objects.
If 'crRadiusServerKey' is not instantiated or is a
zero-length string, then value of the object
'crRadiusAuthkey' is used as the key to communicate with the
corresponding RADIUS server. |
| U32 crRadiusServerIndex | 1.3.6.1.4.1.9.9.288.1.2.2.1.1 | Unsigned32 | not-accessible | An arbitrary integer value, greater than zero, and less than
and equal to crRadiusServerTableMaxEntries, which identifies
a RADIUS Server in this table.
The value of this object must be persistent across
reboots/reinitialization of the device. |
| IPt crRadiusServerAddrType | 1.3.6.1.4.1.9.9.288.1.2.2.1.2 | InetAddressType | read-create | The type of address of the RADIUS Server as specified by
object 'crRadiusServerAddr'. |
| IP crRadiusServerAddr | 1.3.6.1.4.1.9.9.288.1.2.2.1.3 | InetAddress | read-create | The address of the RADIUS Server. |
| CIS crRadiusServerAuthPort | 1.3.6.1.4.1.9.9.288.1.2.2.1.4 | CiscoPort | read-create | This is the destination UDP port number to which RADIUS
authentication messages should be sent. The RADIUS server
will not be used for authentication if this port number is
0. |
| CIS crRadiusServerAcctPort | 1.3.6.1.4.1.9.9.288.1.2.2.1.5 | CiscoPort | read-create | This is the destination UDP port number to which RADIUS
accounting messages should be sent. |
| CIS crRadiusServerKey | 1.3.6.1.4.1.9.9.288.1.2.2.1.6 | CiscoRadiusAuthKey | read-create | The key used in encrypting the packets passed between the
RADIUS server and the client. This key must match the one
configured on the server.
A zero-length string is always returned when this object is
read.
Note that if this object is a zero length string, then
'crRadiusAuthKey' is used as the key for this server. |
| INT crRadiusServerType | 1.3.6.1.4.1.9.9.288.1.2.2.1.7 | INTEGER | read-create | Type of the RADIUS server.
other (1), - a lower priority server
primary (2) - the primary server which is tried first
by the RADIUS client. |
| INT crRadiusServerMode | 1.3.6.1.4.1.9.9.288.1.2.2.1.8 | INTEGER | read-create | Mode of the RADIUS server.
none (1) - neither authentication nor
accounting
authAndAcct (2) - both authentication and
accounting
authOnly (3) - only for authentication
acctOnly (4) - only for accounting. |
| ROW crRadiusServerRowStatus | 1.3.6.1.4.1.9.9.288.1.2.2.1.9 | RowStatus | read-create | Status of this row. |
| CIS crRadiusServerRTTThldNorm | 1.3.6.1.4.1.9.9.288.1.2.2.1.10 | CiscoRadiusRoundTripTimePercent | read-create | This object represents the normal threshold on the
round-trip time of RADIUS authentication messages. This is
measured as a percentage of configured round-trip time as per
RFC-2865. If the round-trip time is less than or equal to this
threshold, the agent generates the crRadiusServerRTTNormNotif
notification. The value configured through this object should
never be greater than that configured through
crRadiusServerRTTThldHi. |
| CIS crRadiusServerRTTThldHi | 1.3.6.1.4.1.9.9.288.1.2.2.1.11 | CiscoRadiusRoundTripTimePercent | read-create | This object represents the high threshold on the round-trip
time of RADIUS authentication messages. This is measured as a
percentage of configured round-trip time as per RFC-2865. If the
round-trip time is greater than or equal to this threshold, the
agent generates the crRadiusServerRTTHiNotif notification. The
value configured through this object should never be smaller
than that configured through crRadiusServerRTTThldNorm. |
| CIS crRadiusServerRetransThldNorm | 1.3.6.1.4.1.9.9.288.1.2.2.1.12 | CiscoRadiusRetransPercent | read-create | This object represents the normal threshold on the
retransmitted RADIUS authentication messages per session. This
is measured as a percentage of crRadiusRetransmits. If the
number of retransmits is less than or equal to this threshold,
the agent generates the crRadiusServerRetransNormNotif
notification. The value configured through this object should
never be greater than that configured through
crRadiusServerRetransThldHi. |
| CIS crRadiusServerRetransThldHi | 1.3.6.1.4.1.9.9.288.1.2.2.1.13 | CiscoRadiusRetransPercent | read-create | This object represents the high threshold on the retransmitted
RADIUS authentication messages per session. This is measured as
a percentage of crRadiusRetransmits. If the number of
retransmits is greater than or equal to this threshold, the
agent generates the crRadiusServerRetransHiNotif notification.
The value configured through this object should never be smaller
than that configured through crRadiusServerRetransThldNorm. |
| crRadiusAttributesConfig | 1.3.6.1.4.1.9.9.288.1.3 | | | |
| T/F crRadiusFramedIpAddrIncluded | 1.3.6.1.4.1.9.9.288.1.3.1 | TruthValue | read-write | Specifies if Access-Request packets will include
Framed-IP-Address attributes. |
| U32 crRadiusFramedMtu | 1.3.6.1.4.1.9.9.288.1.3.2 | Unsigned32 | read-write | Specifies the Framed-MTU attribute value to be sent to
the RADIUS server. |
| crRadiusVlanConfigGroup | 1.3.6.1.4.1.9.9.288.1.4 | | | |
| T/F crRadiusVlanAssignmentEnabled | 1.3.6.1.4.1.9.9.288.1.4.1 | TruthValue | read-write | Specifies if VLANs will be assigned by RADIUS server
via the tunnel attribute during the authentication. |
| crVlanGroupTable | 1.3.6.1.4.1.9.9.288.1.4.2 | | not-accessible | A table containing VLAN Group Mapping information for the
purpose of distributing users across multiple VLANs which
have the same group name. |
| crVlanGroupEntry | 1.3.6.1.4.1.9.9.288.1.4.2.1 | | not-accessible | An entry containing an VLAN Group Mapping information
applicable to a particular VLAN. Entries in this table can
be created or deleted using cpaeVlanGroupRowStatus object. |
| STR crVlanGroupName | 1.3.6.1.4.1.9.9.288.1.4.2.1.1 | SnmpAdminString | not-accessible | Specifies the name of the VLAN group. |
| OCT crVlanGroupVlansLow | 1.3.6.1.4.1.9.9.288.1.4.2.1.2 | OCTET STRING | read-create | A string of octets containing one bit per VLAN for VLANs
with VlanIndex value of 0 to 2047.
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 0 through
7, the second octet specifying VLANs 8 through 15, etc.
Within each octet, the most significant bit represents
the lowest numbered VLAN, and the least significant bit
represents the highest numbered VLAN. Thus, each VLAN
of the device is represented by a single bit within
the value of this object. If that bit has a value of
'1' then that VLAN is included in the group; the VLAN
is not mapped to the group if its bit has a value of
'0'. |
| OCT crVlanGroupVlansHigh | 1.3.6.1.4.1.9.9.288.1.4.2.1.3 | OCTET STRING | read-create | A string of octets containing one bit per VLAN for VLANs
with VlanIndex value of 2048 to 4095.
Each octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2048 through
2055, the second octet specifying VLANs 2056 through 2063,
etc. Within each octet, the most significant bit represents
the lowest numbered VLAN, and the least significant bit
represents the highest numbered VLAN. Thus, each VLAN
of the device is represented by a single bit within
the value of this object. If that bit has a value of
'1' then that VLAN is included in the group; the VLAN
is not mapped to the group if its bit has a value of
'0'. |
| ROW crVlanGroupRowStatus | 1.3.6.1.4.1.9.9.288.1.4.2.1.4 | RowStatus | read-create | This object is used to manage the creation and deletion
of rows in this table.
The only way to create an entry is by setting the value
createAndGo(4), and the only way to delete an entry is by
setting the value destroy(6) to this object. |
| crRadiusKeepAliveConfig | 1.3.6.1.4.1.9.9.288.1.5 | | | |
| T/F crRadiusKeepAliveEnabled | 1.3.6.1.4.1.9.9.288.1.5.1 | TruthValue | read-write | Specifies whether RADIUS keep-alive feature is
enabled or not. |
| U32 crRadiusKeepAliveInterval | 1.3.6.1.4.1.9.9.288.1.5.2 | Unsigned32 | read-write | Specifies the RADIUS keep-alive interval value. When the
object value of crRadiusKeepAliveEnabled is 'true',
a tracking message is sent to every configured RADIUS
server at the interval of crRadiusKeepAliveInterval to
query the status of the server. |
| crRadiusKeepAliveServerTable | 1.3.6.1.4.1.9.9.288.1.5.3 | | not-accessible | This table contains the keep-alive information on
every RADIUS server configured on the system. |
| crRadiusKeepAliveServerEntry | 1.3.6.1.4.1.9.9.288.1.5.3.1 | | not-accessible | An entry containing keep-alive information of a
corresponding RADIUS server configured in
crRadiusServerTable. |
| INT crRadiusKeepAliveServerStatus | 1.3.6.1.4.1.9.9.288.1.5.3.1.1 | INTEGER | read-only | Indicates the current keep-alive status of the RADIUS server.
other : none of the following.
init : the server is in init state.
active : the server is in active state.
checkup: the server is in checkup state.
dead : the server is in dead state.
This object is only instantiated when the corresponding
instance value of crRadiusServerRowStatus is 'active' and
the object value of crRadiusKeepAliveEnabled is 'true'. |
| T/F crRadiusPortAutoInitialize | 1.3.6.1.4.1.9.9.288.1.5.4 | TruthValue | read-write | Specifies whether a port's state machines will be re-
initialized if their state machines are in 'aaaFail'
when a RADIUS server becomes available. |
| STR crRadiusKeepAliveUserName | 1.3.6.1.4.1.9.9.288.1.5.5 | SnmpAdminString | read-write | Specifies the user name used in keep-alive communication
with RADIUS server. |
| crRadiusServerNotifCntl | 1.3.6.1.4.1.9.9.288.1.6 | | | |
| T/F crRadiusServerRTTNormNotifEnable | 1.3.6.1.4.1.9.9.288.1.6.1 | TruthValue | read-write | This object is used to control the generation of
crRadiusServerRTTNormNotif notification. A value of 'true'
indicates that the notification will be generated when the
current server round-trip time is less than or equal to
crRadiusServerRTTThldNorm. |
| T/F crRadiusServerRTTHiNotifEnable | 1.3.6.1.4.1.9.9.288.1.6.2 | TruthValue | read-write | This object is used to control the generation of
crRadiusServerRTTHiNotif notification. A value of 'true'
indicates that the notification will be generated when the
current server round-trip time is greater than or equal to
crRadiusServerRTTThldHi. |
| T/F crRadiusServerRetransNormNotifEnable | 1.3.6.1.4.1.9.9.288.1.6.3 | TruthValue | read-write | This object is used to control the generation of
crRadiusServerRetransNormNotif notification. A value of 'true'
indicates that the notification will be generated when the
current number of server retransmissions are less than or
equal to crRadiusServerRetransThldNorm. |
| T/F crRadiusServerRetransHiNotifEnable | 1.3.6.1.4.1.9.9.288.1.6.4 | TruthValue | read-write | This object is used to control the generation of
crRadiusServerRetransHiNotif notification. A value of 'true'
indicates that the notification will be generated when the
current number of server retransmissions are greater than or
equal to crRadiusServerRetransThldHi. |
| ciscoRadiusMIBConformance | 1.3.6.1.4.1.9.9.288.2 | | | |
| ciscoRadiusMIBCompliances | 1.3.6.1.4.1.9.9.288.2.1 | | | |
| ciscoRadiusMIBCompliance | 1.3.6.1.4.1.9.9.288.2.1.1 | | | The compliance statement for entities which implement the
CISCO-RADIUS-MIB. |
| ciscoRadiusMIBCompliance2 | 1.3.6.1.4.1.9.9.288.2.1.2 | | | The compliance statement for entities which implement the
CISCO-RADIUS-MIB. |
| ciscoRadiusMIBCompliance3 | 1.3.6.1.4.1.9.9.288.2.1.3 | | | The compliance statement for entities which implement the
CISCO-RADIUS-MIB. |
| ciscoRadiusMIBCompliance4 | 1.3.6.1.4.1.9.9.288.2.1.4 | | | The compliance statement for entities which implement the
CISCO-RADIUS-MIB. |
| ciscoRadiusMIBGroups | 1.3.6.1.4.1.9.9.288.2.2 | | | |
| crmConfigurationGroup | 1.3.6.1.4.1.9.9.288.2.2.1 | | | A collection of objects for RADIUS configuration. |
| crmAttributesGroup | 1.3.6.1.4.1.9.9.288.2.2.2 | | | A collection of objects for RADIUS attributes
configuration. |
| crmVlanConfigGroup | 1.3.6.1.4.1.9.9.288.2.2.3 | | | A collection of objects for RADIUS Vlans assignment
configuration. |
| crmKeepAliveGroup | 1.3.6.1.4.1.9.9.288.2.2.4 | | | A collection of objects for RADIUS keep-alive
information. |
| crmAutoInitializeConfigGroup | 1.3.6.1.4.1.9.9.288.2.2.5 | | | A collection of objects for RADIUS auto initialize
configuration. |
| crmAttributesGroup2 | 1.3.6.1.4.1.9.9.288.2.2.6 | | | A collection of additional objects for RADIUS
attributes configuration. |
| crmRadiusKeepAliveUserGroup | 1.3.6.1.4.1.9.9.288.2.2.7 | | | A collection of objects for RADIUS keep-alive
user configuration. |
| crmRadiusServerNotifGroup | 1.3.6.1.4.1.9.9.288.2.2.8 | | | This collection of notifications is used to monitor the
responsiveness of the RADIUS server. |
| crmConfigurationGroupSup1 | 1.3.6.1.4.1.9.9.288.2.2.9 | | | This group supplements crmConfigurationGroup, to
configure the thresholds on the round-trip times and
retransmission counts. |
| crmRadiusServerNotifCntlGroup | 1.3.6.1.4.1.9.9.288.2.2.10 | | | This collection of objects control the generation of
notifications related to RADIUS server. |
| ciscoRadiusMIBNotifications | 1.3.6.1.4.1.9.9.288.3 | | | |
| NTF crRadiusServerRTTNormNotif | 1.3.6.1.4.1.9.9.288.3.1 | | | This notification indicates that the current server round-trip
time is less than or equal to crRadiusServerRTTThldNorm. Once
sent, this notification will be disarmed until the round-trip
time exceeds the value configured through
crRadiusServerRTTThldHi. |
| NTF crRadiusServerRTTHiNotif | 1.3.6.1.4.1.9.9.288.3.2 | | | This notification indicates that the current server round-trip
time is greater than or equal to crRadiusServerRTTThldHi. Once
sent, this notification will be disarmed until the round-trip
time falls below the value configured through
crRadiusServerRTTThldNorm. |
| NTF crRadiusServerRetransNormNotif | 1.3.6.1.4.1.9.9.288.3.3 | | | This notification indicates that the current number of server
retransmissions are less than or equal to
crRadiusServerRetransThldNorm. Once sent, this notification will
be disarmed until the number of retransmissions exceed the value
configured through crRadiusServerRetransThldHi. |
| NTF crRadiusServerRetransHiNotif | 1.3.6.1.4.1.9.9.288.3.4 | | | This notification indicates that the current number of server
retransmissions are greater than or equal to
crRadiusServerRetransThldHi. Once sent, this notification will
be disarmed until the number of retransmissions falls below the
value configured through crRadiusServerRetransThldNorm. |
