All MIBs › CISCO-IPSLA-ETHERNET-MIB
Organization: Cisco Systems, Inc.
Last Updated: 2018-09-26
Category: Cisco Devices, Quality of Service
Description: Manages IP SLA Ethernet OAM (Y.1731) probes for delay and loss measurement on Ethernet networks.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCO-IPSLA-ETHERNET-MIB?
CISCO-IPSLA-ETHERNET-MIB is part of Cisco's IP SLA active-monitoring framework, focused on Ethernet OAM (Y.1731-style) performance measurements. It covers two functional areas: Auto-Ethernet-CFM control tables for configuring and reacting to CFM-based probes, and Ethernet jitter statistics tables reporting delay-variation measurements at latest, aggregate, and bin-aggregate granularity. This is a network-performance monitoring MIB used to track Ethernet-layer latency, jitter, and loss on a per-probe basis, and to configure automated reaction when a configured threshold is exceeded -- monitoring the performance health of an Ethernet path rather than device hardware. It builds on Cisco's broader IP SLA/RTTMON infrastructure and IEEE 802.1ag/ITU-T Y.1731 CFM concepts. It is deployed on Cisco switches/routers in carrier Ethernet or enterprise networks used to actively probe and verify SLA compliance on Ethernet links. Engineers can download the CISCO-IPSLA-ETHERNET-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-IPSLA-ETHERNET-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco switches/routers running IP SLA over Ethernet (carrier Ethernet/enterprise WAN)
Monitoring Examples
ipslaEthernetGrpCtrlTable/ipslaEthernetGrpCtrlEntry configures a probe group with ipslaEthernetGrpCtrlThreshold, ipslaEthernetGrpCtrlTimeout, and ipslaEthernetGrpCtrlVLAN, while ipslaEtherJitterLatestStatsTable and ipslaEtherJitterAggStatsTable report the resulting jitter measurements. An operator would poll the aggregated jitter/latency stats to confirm an Ethernet path stays within its SLA threshold; a rising trend in those stats or a probe crossing ipslaEthernetGrpCtrlThreshold indicates emerging congestion or a degrading Ethernet path that needs investigation.
What Can Be Monitored
- Ethernet jitter/latency statistics
- SLA threshold breach status
- CFM probe group configuration
- probe timeout and VLAN scope
This MIB depends on
Related MIBs
Imported Objects
From CISCO-RTTMON-MIB
| rttMonCtrlAdminIndex | OBJECT-TYPE |
From CISCO-RTTMON-TC-MIB
| RttMonCtrlIndex | |
| RttMonIdLst | |
| RttMonReactVar | |
| RttMonRttType | |
| RttResponseSense |
From CISCO-SMI
| ciscoMgmt | OBJECT-IDENTITY |
From CISCO-TC
| Layer2Cos |
From HCNUM-TC
| CounterBasedGauge64 |
From IEEE8021-CFM-MIB
| Dot1agCfmMaintDomainName | |
| Dot1agCfmMaintDomainNameType |
From Q-BRIDGE-MIB
| VlanId |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| Gauge32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| TimeTicks | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| StorageType | |
| TimeStamp |
How to Use in IPNetwork Monitor
Example using ipslaEtherJAggMeasuredCmpletions OID:
Select a Cisco switches/routers running IP SLA over Ethernet as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ipslaEtherJAggMeasuredCmpletions into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of Ethernet jitter operations that have completed successfully. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in completions), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ciscoIpSlaEthernetAutoEVCGroup | 1.3.6.1.4.1.9.9.585.2.2.3 | A collection of objects which provides the support for Auto-Ethernet-CFM ping/jitter operation with Ethernet Virtual Connection. | ||
| ciscoIpSlaEthernetAutoGroup | 1.3.6.1.4.1.9.9.585.2.2.1 | A collection of objects that were added to support Auto-Ethernet-CFM. | ||
| ciscoIpSlaEthernetCompliance | 1.3.6.1.4.1.9.9.585.2.1.1 | The compliance statement for (1) Ethernet Jitter operation and statistics | ||
| ciscoIpSlaEthernetComplianceRev2 | 1.3.6.1.4.1.9.9.585.2.1.2 | The compliance statement for (1) Ethernet Jitter operation and statistics (2) supporting IP SLA Auto-Ethernet-CFM | ||
| ciscoIpSlaEthernetComplianceRev3 | 1.3.6.1.4.1.9.9.585.2.1.3 | The compliance statement for (1) Ethernet Jitter operation and statistics (2) supporting IP SLA Y1731 | ||
| ciscoIpSlaEthernetComplianceRev4 | 1.3.6.1.4.1.9.9.585.2.1.4 | The compliance statement for (1) Ethernet Jitter operation and statistics (2) supporting IP SLA Y1731 | ||
| ciscoIpSlaEthernetComplianceRev5 | 1.3.6.1.4.1.9.9.585.2.1.5 | The compliance statement for (1) Ethernet Jitter operation and statistics (2) supporting IP SLA Y1731 (3) supporting IP SLA Y1731 Bin statistics | ||
| ciscoIpSlaEthernetComplianceRev6 | 1.3.6.1.4.1.9.9.585.2.1.6 | The compliance statement for (1) Ethernet Jitter operation and statistics (2) supporting IP SLA Y1731 | ||
| ciscoIpSlaEthernetCompliances | 1.3.6.1.4.1.9.9.585.2.1 | |||
| ciscoIpSlaEthernetDelayStatsGroup | 1.3.6.1.4.1.9.9.585.2.2.7 | A collection of objects which provides the Y1731 delay and delay variance with microsecond unit. | ||
| ciscoIpSlaEthernetMIB | 1.3.6.1.4.1.9.9.585 | This MIB module consists of two parts. 1) Auto-Ethernet-CFM Control: |-- ipslaEthernetGrpCtrlTable |-- ipslaEthernetGrpReactTable 2) ethernetJitter Stats: |-- ipslaEtherJitterLatestStatsTable |-- ipslaEtherJitterAggStatsTable |-- ipslaEtherJitterAggBinTable The first part defines a mechanism to manage IP SLA Auto-Ethernet-CFM operation. IP SLA is a capability which utilizes active monitoring for network perfomance. It can be used for network troubleshooting, network assessment and health monitoring. IEEE 802.1ag defines Connection Fault Management (CFM) for Ethernet layer. CFM can be used to detect, isolate and report the connectivity faults, and allows discovery and verification of the path through briges and LANs. Auto-Ethernet-CFM operation integrates the capabilities of IP SLA and IEEE 802.1ag. It's capable of discovering all the existing MEPs in a specified VLAN or Ethernet Virtual Connection within a specified maintenance domain. After which, it creates, configures, and schedules an IP SLA operation for each MEP automatically. IP SLA currently supports two types of operations for end-to-end Ethernet connectivity - 'ethernetPing' and 'ethernetJitter'. 'ethernetPing' can be used to monitor the connectivity and measure RTT by sending the regular 802.1ag loopback frame to a particular MEP. 'ethernetJitter' can be used to measure metrics such as RTT, Jitter, frame loss, one-way latency by sending multiple enhanced CFM frames at specified interval to a particular MEP. Without Auto-Ethernet-CFM operation, the two types of operations can also be created, configured, and scheduled manually through CISCO-RTTMON-MIB by specifing the target MEP's identifier in addition to the VLAN or Ethernet Virtual Connection and Maintenance Domain. With Auto-Ethernet-CFM operation, the two types of operations will be created automatically. The Auto-Ethernet-CFM will pass all the values specified in this module to the corresponding objects in CISCO-RTTMON-MIB for each MEP discovered. CISCO-IPSLA-ETHERNET-MIB CISCO-RTTMON-MIB ipslaEthernetGrpCtrlTable -> rttMonCtrlAdminTable | -> rttMonEchoAdminTable ipslaEthernetGrpReactTable -> rttMonReactTable The second part defines a collection of statistics resulting from 'ethernetJitter' operation created either manually or automatically. Glossary: CFM - Connection Fault Management DSAP - Domain Service Access Point: A member of a set of SAPs at which a Maintenance Domain is capable of offering connectivity to systems outside the Maintenance Domain. IP SLA - Cisco IOS IP Service Level Agreements IP SLA operation - Refers to the 'ethernetPing' or 'ethernetJitter' operation supported by IP SLA. MEP - Maintenance association End Point: An actively managed CFM entity, associated with a specific DSAP of a service instance, which can generate and receive CFM PDUs and track any responses. maintenance domain - The network or the part of the network for which faults in connectivity are to be managed. The boundary of a Maintenance Domain is defined by a set of DSAPs, each of which can become a point of connectivity to a service instance. Maintenance Domain Name - The identifier, unique over the domain for which CFM is to protect against accidental concatenation of service instances, of a particular Maintenance Domain. RTT - Round Trip Time SAP - Service Access Point at which a service is offered. service instance - A service instance is a set of SAPs, selected from among the DSAPs defining a Maintenance Domain, such that a Data.Request primitive presented to one SAP can result in a Data.Indication primitive occurring at one or more of the other SAPs in the set. It corresponds to a VLAN or an Ethernet Virtual Connection. TLV - Stands for Type, Length, Value, and denotes a method of encoding variable-length and/or optional information in a PDU. TLVs are not aligned to any particular word or octet boundary. TLVs follow each other with no padding between TLVs. VLAN - Virtual Local Area Network: A subset of the active topology of a Bridged Local Area Network. Associated with each VLAN is a VLAN Identifier. REFERENCE: IEEE 802.1ag Draft 6.0 'Virtual Briged Local Area Networks - Amendments 5: Connectivity Fault Management' July 2006 | ||
| ciscoIpSlaEthernetMIBConform | 1.3.6.1.4.1.9.9.585.2 | |||
| ciscoIpSlaEthernetMIBGroups | 1.3.6.1.4.1.9.9.585.2.2 | |||
| ciscoIpSlaEthernetMIBNotifs | 1.3.6.1.4.1.9.9.585.0 | |||
| ciscoIpSlaEthernetMIBObjects | 1.3.6.1.4.1.9.9.585.1 | |||
| ciscoIpSlaEthernetOverThreshGroup | 1.3.6.1.4.1.9.9.585.2.2.5 | A collection of objects which provides the support for Over Threshold statistics for Ethernet Jitter. | ||
| ciscoIpSlaEthernetStatsGroup | 1.3.6.1.4.1.9.9.585.2.2.2 | A collection of statistics objects related to Ethernet Jitter Probe. | ||
| ciscoIpSlaEthernetY1731BinStatsGroup | 1.3.6.1.4.1.9.9.585.2.2.6 | A collection of objects which provides the support for Y1731 Statistics Bin. | ||
| ciscoIpSlaEthernetY1731Group | 1.3.6.1.4.1.9.9.585.2.2.4 | A collection of objects which provides the support for Y1731 operation with Ethernet Virtual Connection. | ||
| NUM ipslaEtherDelayAggMeasuredAvgJ | 1.3.6.1.4.1.9.9.585.1.2.1.1.122 | CounterBasedGauge64 | read-only | The average of positive and negative jitter values for source-to-destination and destination-to-source direction. |
| NUM ipslaEtherDelayAggMeasuredAvgJDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.121 | CounterBasedGauge64 | read-only | The average of positive and negative jitter values in destination to source direction. |
| NUM ipslaEtherDelayAggMeasuredAvgJSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.120 | CounterBasedGauge64 | read-only | The average of positive and negative jitter values in source to destination direction. |
| NUM ipslaEtherDelayAggMeasuredMaxNegDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.110 | CounterBasedGauge64 | read-only | The maximum of all negative jitter values for the frames sent from destination to source. |
| NUM ipslaEtherDelayAggMeasuredMaxNegSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.104 | CounterBasedGauge64 | read-only | The maximum of all negative jitter values for the frames sent from source to destination. |
| NUM ipslaEtherDelayAggMeasuredMaxNegTW | 1.3.6.1.4.1.9.9.585.1.2.1.1.117 | CounterBasedGauge64 | read-only | The maximum of all two-way negative jitter values. |
| NUM ipslaEtherDelayAggMeasuredMaxPosDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.107 | CounterBasedGauge64 | read-only | The maximum of all positive jitter values for the frames sent from destination to source. |
| NUM ipslaEtherDelayAggMeasuredMaxPosSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.101 | CounterBasedGauge64 | read-only | The maximum of all positive jitter values for the frames sent from source to destination. |
| NUM ipslaEtherDelayAggMeasuredMaxPosTW | 1.3.6.1.4.1.9.9.585.1.2.1.1.113 | CounterBasedGauge64 | read-only | The maximum of all two-way postive jitter values. |
| NUM ipslaEtherDelayAggMeasuredMinNegDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.109 | CounterBasedGauge64 | read-only | The minimum of all negative jitter values for the frames sent from destination to source. |
| NUM ipslaEtherDelayAggMeasuredMinNegSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.103 | CounterBasedGauge64 | read-only | The minimum of all negative jitter values for the frames sent from source to destination. |
| NUM ipslaEtherDelayAggMeasuredMinNegTW | 1.3.6.1.4.1.9.9.585.1.2.1.1.116 | CounterBasedGauge64 | read-only | The minimum of all two-way negative jitter values. |
| NUM ipslaEtherDelayAggMeasuredMinPosDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.106 | CounterBasedGauge64 | read-only | The minimum of all positive jitter values for the frames sent from destination to source. |
| NUM ipslaEtherDelayAggMeasuredMinPosSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.100 | CounterBasedGauge64 | read-only | The minimum of all positive jitter values for the frames sent from source to destination. |
| NUM ipslaEtherDelayAggMeasuredMinPosTW | 1.3.6.1.4.1.9.9.585.1.2.1.1.112 | CounterBasedGauge64 | read-only | The minimum of all two-way postive jitter values. |
| C32 ipslaEtherDelayAggMeasuredNumNegTW | 1.3.6.1.4.1.9.9.585.1.2.1.1.119 | Counter32 | read-only | The number of two-way negative jitter measurements that are successfully measured. |
| C32 ipslaEtherDelayAggMeasuredNumPosTW | 1.3.6.1.4.1.9.9.585.1.2.1.1.115 | Counter32 | read-only | The number of two-way positive jitter measurements that are successfully measured. |
| NUM ipslaEtherDelayAggMeasuredOWMaxDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.98 | CounterBasedGauge64 | read-only | The maximum of all one way trip time from destination to source. |
| NUM ipslaEtherDelayAggMeasuredOWMaxSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.95 | CounterBasedGauge64 | read-only | The maximum of all one way trip time from source to destination. |
| NUM ipslaEtherDelayAggMeasuredOWMinDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.97 | CounterBasedGauge64 | read-only | The minimum of all one way trip time from destination to source. |
| NUM ipslaEtherDelayAggMeasuredOWMinSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.94 | CounterBasedGauge64 | read-only | The minimum of all one way trip time from source to destination. |
| NUM ipslaEtherDelayAggMeasuredOWSumDSes | 1.3.6.1.4.1.9.9.585.1.2.1.1.99 | CounterBasedGauge64 | read-only | The sum of all one way trip time from destination to source. |
| NUM ipslaEtherDelayAggMeasuredOWSumSDs | 1.3.6.1.4.1.9.9.585.1.2.1.1.96 | CounterBasedGauge64 | read-only | The sum of all one way trip time from source to destination. |
| NUM ipslaEtherDelayAggMeasuredRTTMax | 1.3.6.1.4.1.9.9.585.1.2.1.1.92 | CounterBasedGauge64 | read-only | The maximum of RTTs that were successfully measured. |
| NUM ipslaEtherDelayAggMeasuredRTTMin | 1.3.6.1.4.1.9.9.585.1.2.1.1.91 | CounterBasedGauge64 | read-only | The minimum of RTTs that were successfully measured. |
| NUM ipslaEtherDelayAggMeasuredRTTSums | 1.3.6.1.4.1.9.9.585.1.2.1.1.93 | CounterBasedGauge64 | read-only | The sum of RTTs that are successfully measured for this ipslaEtherJAggMeasuredStartTimeId hourly group. The number of the successfully measured RTT is stored in the ipslaEtherJAggMeasuredNumRTTs. |
| NUM ipslaEtherDelayAggMeasuredSumNegDSes | 1.3.6.1.4.1.9.9.585.1.2.1.1.111 | CounterBasedGauge64 | read-only | The sum of all negative jitter values for the frames sent |
| NUM ipslaEtherDelayAggMeasuredSumNegSDs | 1.3.6.1.4.1.9.9.585.1.2.1.1.105 | CounterBasedGauge64 | read-only | The sum of all negative jitter values for the frames sent from source to destination. The number of such values is stored in ipslaEtherJAggMeasuredNumNegSDs. |
| NUM ipslaEtherDelayAggMeasuredSumNegTW | 1.3.6.1.4.1.9.9.585.1.2.1.1.118 | CounterBasedGauge64 | read-only | The sum of all two-way negative jitter values. The number of such values is stored in ipslaEtherDelayAggMeasuredNumNegTW. |
| NUM ipslaEtherDelayAggMeasuredSumPosDSes | 1.3.6.1.4.1.9.9.585.1.2.1.1.108 | CounterBasedGauge64 | read-only | The sum of all positive jitter values for the frames sent from destination to source. The number of such values is stored in ipslaEtherJAggMeasuredNumPosDSes. |
| NUM ipslaEtherDelayAggMeasuredSumPosSDs | 1.3.6.1.4.1.9.9.585.1.2.1.1.102 | CounterBasedGauge64 | read-only | The sum of all positive jitter values for frames sent from source to destination. The number of such values stored in ipslaEtherJAggMeasuredNumPosSDs. |
| NUM ipslaEtherDelayAggMeasuredSumPosTW | 1.3.6.1.4.1.9.9.585.1.2.1.1.114 | CounterBasedGauge64 | read-only | The sum of all two-way positive jitter values. The number of such values is stored in ipslaEtherDelayAggMeasuredNumPosTW. |
| NUM ipslaEtherDelayAggMeasuredTWAvgJ | 1.3.6.1.4.1.9.9.585.1.2.1.1.123 | CounterBasedGauge64 | read-only | The average of two-way positive and negative jitter values. |
| C32 ipslaEtherJAggLossMeasurementRate | 1.3.6.1.4.1.9.9.585.1.2.1.1.90 | Counter32 | read-only | Loss Measurement rate from source to destination |
| G32 ipslaEtherJAggMaxSucFrmLoss | 1.3.6.1.4.1.9.9.585.1.2.1.1.56 | Gauge32 | read-only | The maximum number of frames that are dropped successively. |
| G32 ipslaEtherJAggMeasuredAvgJ | 1.3.6.1.4.1.9.9.585.1.2.1.1.52 | Gauge32 | read-only | The average of positive and negative jitter values for source-to-destination and destination-to-source direction. |
| G32 ipslaEtherJAggMeasuredAvgJDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.54 | Gauge32 | read-only | The average of positive and negative jitter values in destination-to-source direction. |
| G32 ipslaEtherJAggMeasuredAvgJSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.53 | Gauge32 | read-only | The average of positive and negative jitter values in source-to-destination direction. |
| G32 ipslaEtherJAggMeasuredAvgLossDenominatorDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.80 | Gauge32 | read-only | The denominator for the average loss ratio recorded in the destination to source direction. |
| G32 ipslaEtherJAggMeasuredAvgLossDenominatorSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.74 | Gauge32 | read-only | The denominator for the average loss ratio recorded in the source to destination direction. |
| G32 ipslaEtherJAggMeasuredAvgLossNumeratorDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.79 | Gauge32 | read-only | The numerator for the average loss ratio recorded in the destination to source direction. |
| G32 ipslaEtherJAggMeasuredAvgLossNumeratorSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.73 | Gauge32 | read-only | The numerator for the average loss ratio recorded in the source to destination direction. |
| C32 ipslaEtherJAggMeasuredBusies | 1.3.6.1.4.1.9.9.585.1.2.1.1.40 | Counter32 | read-only | The number of occasions when an Ethernet jitter operation could not be initiated because a previous Ethernet jitter operation has not been completed. |
| C32 ipslaEtherJAggMeasuredCmpletionsEx | 1.3.6.1.4.1.9.9.585.1.2.1.1.2 | Counter32 | read-only | The number of Ethernet jitter operations that have completed successfully. |
| G32 ipslaEtherJAggMeasuredCumulativeAvgLossDenominatorDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.88 | Gauge32 | read-only | The denominator for the average loss ratio recorded in the destination to source direction. This value is cumulative over the period of this interval. |
| G32 ipslaEtherJAggMeasuredCumulativeAvgLossDenominatorSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.84 | Gauge32 | read-only | The denominator for the average loss ratio recorded in the source to destination direction. This value is cumulative over the period of this interval. |
| G32 ipslaEtherJAggMeasuredCumulativeAvgLossNumeratorDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.87 | Gauge32 | read-only | The numerator for the average loss ratio recorded in the destination to source direction. This value is cumulative over the period of this interval. |
| G32 ipslaEtherJAggMeasuredCumulativeAvgLossNumeratorSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.83 | Gauge32 | read-only | The numerator for the average loss ratio recorded in the source to destination direction. This value is cumulative over the perios of this interval. |
| G32 ipslaEtherJAggMeasuredCumulativeLossDenominatorDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.86 | Gauge32 | read-only | The denominator for the loss ratio recorded in the destination to source direction. This valued is cumulative over the period of this interval. |
| G32 ipslaEtherJAggMeasuredCumulativeLossDenominatorSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.82 | Gauge32 | read-only | The denominator for the loss ratio recorded in the source to destination direction. This value is cumulative over the period of this interval. |
| G32 ipslaEtherJAggMeasuredCumulativeLossNumeratorDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.85 | Gauge32 | read-only | The numerator for the loss ratio recorded in the destination to source direction. This value is cumulative over the period of this interval. |
| G32 ipslaEtherJAggMeasuredCumulativeLossNumeratorSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.81 | Gauge32 | read-only | The numerator for the loss ratio recorded in the source to destination direction. This value is cumulative over the period of this interval. |
| C32 ipslaEtherJAggMeasuredErrors | 1.3.6.1.4.1.9.9.585.1.2.1.1.39 | Counter32 | read-only | The number of occasions when an Ethernet jitter operation could not be initiated because of an internal error. |
| C32 ipslaEtherJAggMeasuredFrmLateAs | 1.3.6.1.4.1.9.9.585.1.2.1.1.59 | Counter32 | read-only | The number of frames that arrived after the timeout. |
| C32 ipslaEtherJAggMeasuredFrmLossSDs | 1.3.6.1.4.1.9.9.585.1.2.1.1.34 | Counter32 | read-only | The number of lost frames when sent from source to destination. |
| C32 ipslaEtherJAggMeasuredFrmLssDSes | 1.3.6.1.4.1.9.9.585.1.2.1.1.35 | Counter32 | read-only | The number of lost frames when sent from destination to source. |
| C32 ipslaEtherJAggMeasuredFrmMIAes | 1.3.6.1.4.1.9.9.585.1.2.1.1.37 | Counter32 | read-only | The number of frames that are lost for which we cannot determine the direction. |
| C32 ipslaEtherJAggMeasuredFrmOutSeqs | 1.3.6.1.4.1.9.9.585.1.2.1.1.36 | Counter32 | read-only | The number of frames arrived out of sequence. |
| C32 ipslaEtherJAggMeasuredFrmSkippds | 1.3.6.1.4.1.9.9.585.1.2.1.1.38 | Counter32 | read-only | The number of frames that are skipped per operation because the router could not send the packet out. |
| C32 ipslaEtherJAggMeasuredFrmUnPrcds | 1.3.6.1.4.1.9.9.585.1.2.1.1.60 | Counter32 | read-only | The number of frames that arrived but could not be processed due to the internal error. |
| G32 ipslaEtherJAggMeasuredIAJIn | 1.3.6.1.4.1.9.9.585.1.2.1.1.58 | Gauge32 | read-only | Inter-arrival jitter (RFC 1889) at sender |
| G32 ipslaEtherJAggMeasuredIAJOut | 1.3.6.1.4.1.9.9.585.1.2.1.1.57 | Gauge32 | read-only | Inter-arrival jitter (RFC 1889) at responder |
| G32 ipslaEtherJAggMeasuredMaxLossDenominatorDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.78 | Gauge32 | read-only | The denominator for the maximum loss ratio recorded in the destination to source direction. |
| G32 ipslaEtherJAggMeasuredMaxLossDenominatorSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.72 | Gauge32 | read-only | The denominator for the maximum loss ratio recorded in the source to destination direction. |
| G32 ipslaEtherJAggMeasuredMaxLossNumeratorDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.77 | Gauge32 | read-only | The numerator for the maximum loss ratio recorded in the destination to source direction. |
| G32 ipslaEtherJAggMeasuredMaxLossNumeratorSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.71 | Gauge32 | read-only | The numerator for the maximum loss ratio recorded in the source to destination direction. |
| G32 ipslaEtherJAggMeasuredMaxNegDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.29 | Gauge32 | read-only | The maximum of all negative jitter values for frames sent from destination to source. |
| G32 ipslaEtherJAggMeasuredMaxNegSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.17 | Gauge32 | read-only | The maximum of all negative jitter values for frames sent from source to destination. |
| G32 ipslaEtherJAggMeasuredMaxNegTW | 1.3.6.1.4.1.9.9.585.1.2.1.1.62 | Gauge32 | read-only | The two-way maximum of all negative jitter values for frames. |
| G32 ipslaEtherJAggMeasuredMaxPosDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.23 | Gauge32 | read-only | The maximum of all positive jitter values for frames sent from destination to source. |
| G32 ipslaEtherJAggMeasuredMaxPosSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.11 | Gauge32 | read-only | The maximum of absolute values of all positive jitter values for frames sent from source to destination. |
| G32 ipslaEtherJAggMeasuredMaxPosTW | 1.3.6.1.4.1.9.9.585.1.2.1.1.61 | Gauge32 | read-only | The two-way maximum of all positive jitter values for frames. |
| G32 ipslaEtherJAggMeasuredMinLossDenominatorDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.76 | Gauge32 | read-only | The denominator for the minimum loss ratio recorded in the destination to source direction. |
| G32 ipslaEtherJAggMeasuredMinLossDenominatorSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.70 | Gauge32 | read-only | The denominator for the minimum loss ratio recorded in the source to destination direction. |
| G32 ipslaEtherJAggMeasuredMinLossNumeratorDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.75 | Gauge32 | read-only | The numerator for the minimum loss ratio recorded in the destination to source direction. |
| G32 ipslaEtherJAggMeasuredMinLossNumeratorSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.69 | Gauge32 | read-only | The numerator for the minimum loss ratio recorded in the source to destination direction. |
| G32 ipslaEtherJAggMeasuredMinNegDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.28 | Gauge32 | read-only | The minimum of all negative jitter values for frames sent from destination to source. |
| G32 ipslaEtherJAggMeasuredMinNegSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.16 | Gauge32 | read-only | The minimum of all negative jitter values for frames sent from source to destination. |
| G32 ipslaEtherJAggMeasuredMinNegTW | 1.3.6.1.4.1.9.9.585.1.2.1.1.64 | Gauge32 | read-only | The two-way minimum of all negative jitter values for frames. |
| G32 ipslaEtherJAggMeasuredMinPosDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.22 | Gauge32 | read-only | The minimum of all positive jitter values for frames sent from destination to source. |
| G32 ipslaEtherJAggMeasuredMinPosSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.10 | Gauge32 | read-only | The minimum of absolute values of all positive jitter values for frames sent from source to destination. |
| G32 ipslaEtherJAggMeasuredMinPosTW | 1.3.6.1.4.1.9.9.585.1.2.1.1.63 | Gauge32 | read-only | The two-way minimum of all positive jitter values for frames. |
| C32 ipslaEtherJAggMeasuredNumNegDSes | 1.3.6.1.4.1.9.9.585.1.2.1.1.30 | Counter32 | read-only | The number of all negative jitter values for frames sent from destination to source. |
| C32 ipslaEtherJAggMeasuredNumNegSDs | 1.3.6.1.4.1.9.9.585.1.2.1.1.18 | Counter32 | read-only | The number of all negative jitter values for frames sent from source to destination. |
| G32 ipslaEtherJAggMeasuredNumOverThresh | 1.3.6.1.4.1.9.9.585.1.2.1.1.89 | Gauge32 | read-only | The number of RTTs that were over the threshold value. |
| C32 ipslaEtherJAggMeasuredNumOWs | 1.3.6.1.4.1.9.9.585.1.2.1.1.51 | Counter32 | read-only | The number of one way trip time that are successfully measured. |
| C32 ipslaEtherJAggMeasuredNumPosDSes | 1.3.6.1.4.1.9.9.585.1.2.1.1.24 | Counter32 | read-only | The number of all positive jitter values for frames sent from destination to source. |
| C32 ipslaEtherJAggMeasuredNumPosSDs | 1.3.6.1.4.1.9.9.585.1.2.1.1.12 | Counter32 | read-only | The number of all positive jitter values for frames sent from source to destination. |
| C32 ipslaEtherJAggMeasuredNumRTTs | 1.3.6.1.4.1.9.9.585.1.2.1.1.4 | Counter32 | read-only | The number of RTTs that are successfully measured. |
| C32 ipslaEtherJAggMeasuredOvThrshlds | 1.3.6.1.4.1.9.9.585.1.2.1.1.3 | Counter32 | read-only | The number of Ethernet jitter operations that violate jitterAvg threshold which is defined in RttMonReactVar. |
| G32 ipslaEtherJAggMeasuredOWMaxDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.50 | Gauge32 | read-only | The maximum of all one way trip time from destination to source. |
| G32 ipslaEtherJAggMeasuredOWMaxSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.45 | Gauge32 | read-only | The maximum of all one way trip time from source to destination. |
| G32 ipslaEtherJAggMeasuredOWMinDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.49 | Gauge32 | read-only | The minimum of all one way trip time from destination to source. |
| G32 ipslaEtherJAggMeasuredOWMinSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.44 | Gauge32 | read-only | The minimum of all one way trip time from source to destination. |
| C32 ipslaEtherJAggMeasuredOWSum2DSHs | 1.3.6.1.4.1.9.9.585.1.2.1.1.48 | Counter32 | read-only | The sum of squares of one way trip time from destination to source (high order 32 bits). |
| C32 ipslaEtherJAggMeasuredOWSum2DSLs | 1.3.6.1.4.1.9.9.585.1.2.1.1.47 | Counter32 | read-only | The sum of squares of one way trip time from destination to source (low order 32 bits). |
| C32 ipslaEtherJAggMeasuredOWSum2SDHs | 1.3.6.1.4.1.9.9.585.1.2.1.1.43 | Counter32 | read-only | The sum of squares of one way trip time from source to destination (high order 32 bits). |
| C32 ipslaEtherJAggMeasuredOWSum2SDLs | 1.3.6.1.4.1.9.9.585.1.2.1.1.42 | Counter32 | read-only | The sum of squares of one way trip time from source to destination (low order 32 bits). |
| C32 ipslaEtherJAggMeasuredOWSumDSes | 1.3.6.1.4.1.9.9.585.1.2.1.1.46 | Counter32 | read-only | The sum of one way trip time from destination to source. |
| C32 ipslaEtherJAggMeasuredOWSumSDs | 1.3.6.1.4.1.9.9.585.1.2.1.1.41 | Counter32 | read-only | The sum of one way trip time from source to destination. |
| G32 ipslaEtherJAggMeasuredRTTMax | 1.3.6.1.4.1.9.9.585.1.2.1.1.9 | Gauge32 | read-only | The maximum of RTTs that were successfully measured. |
| G32 ipslaEtherJAggMeasuredRTTMin | 1.3.6.1.4.1.9.9.585.1.2.1.1.8 | Gauge32 | read-only | The minimum of RTTs that were successfully measured. |
| C32 ipslaEtherJAggMeasuredRTTSum2Hs | 1.3.6.1.4.1.9.9.585.1.2.1.1.7 | Counter32 | read-only | The sum of squares of RTTs that are successfully measured (high order 32 bits). |
| C32 ipslaEtherJAggMeasuredRTTSum2Ls | 1.3.6.1.4.1.9.9.585.1.2.1.1.6 | Counter32 | read-only | The sum of squares of RTTs that are successfully measured (low order 32 bits). |
| C32 ipslaEtherJAggMeasuredRTTSums | 1.3.6.1.4.1.9.9.585.1.2.1.1.5 | Counter32 | read-only | The sum of RTTs that are successfully measured for this ipslaEtherJAggMeasuredStartTimeId hourly group. The number of the successfully measured RTT is stored in the ipslaEtherJAggMeasuredNumRTTs. |
| C64 ipslaEtherJAggMeasuredRxFrmsDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.68 | Counter64 | read-only | The number of data frames received from destination to source. |
| C64 ipslaEtherJAggMeasuredRxFrmsSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.67 | Counter64 | read-only | The number of data frames received from source to destination. |
| C32 ipslaEtherJAggMeasuredSum2NDSHs | 1.3.6.1.4.1.9.9.585.1.2.1.1.33 | Counter32 | read-only | The sum of squares of all negative jitter values for frames sent from destination to source (high order 32 bits). |
| C32 ipslaEtherJAggMeasuredSum2NDSLs | 1.3.6.1.4.1.9.9.585.1.2.1.1.32 | Counter32 | read-only | The sum of squares of all negative jitter values for frames sent from destination to source (low order 32 bits). |
| C32 ipslaEtherJAggMeasuredSum2NSDHs | 1.3.6.1.4.1.9.9.585.1.2.1.1.21 | Counter32 | read-only | The sum of square of all negative jitter values for frames sent from source to destination (high order 32 bits). |
| C32 ipslaEtherJAggMeasuredSum2NSDLs | 1.3.6.1.4.1.9.9.585.1.2.1.1.20 | Counter32 | read-only | The sum of square of all negative jitter values for frames sent from source to destination (low order 32 bits). |
| C32 ipslaEtherJAggMeasuredSum2PDSHs | 1.3.6.1.4.1.9.9.585.1.2.1.1.27 | Counter32 | read-only | The sum of squares of all positive jitter values for frames sent from destination to source (high order 32 bits). |
| C32 ipslaEtherJAggMeasuredSum2PDSLs | 1.3.6.1.4.1.9.9.585.1.2.1.1.26 | Counter32 | read-only | The sum of squares of all positive jitter values for frames sent from destination to source (low order 32 bits). |
| C32 ipslaEtherJAggMeasuredSum2PSDHs | 1.3.6.1.4.1.9.9.585.1.2.1.1.15 | Counter32 | read-only | The sum of square of all positive jitter values for frames sent from source to destination (high order 32 bits). |
| C32 ipslaEtherJAggMeasuredSum2PSDLs | 1.3.6.1.4.1.9.9.585.1.2.1.1.14 | Counter32 | read-only | The sum of square of all positive jitter values for frames sent from source to destination (low order 32 bits). |
| C32 ipslaEtherJAggMeasuredSumNegDSes | 1.3.6.1.4.1.9.9.585.1.2.1.1.31 | Counter32 | read-only | The sum of all negative jitter values for frames sent from destination to source. The number of such values is stored in ipslaEtherJAggMeasuredNumNegDSes. |
| C32 ipslaEtherJAggMeasuredSumNegSDs | 1.3.6.1.4.1.9.9.585.1.2.1.1.19 | Counter32 | read-only | The sum of all negative jitter values for frames sent from source to destination. The number of such values is stored in ipslaEtherJAggMeasuredNumNegSDs. |
| C32 ipslaEtherJAggMeasuredSumPosDSes | 1.3.6.1.4.1.9.9.585.1.2.1.1.25 | Counter32 | read-only | The sum of all positive jitter values for frames sent from destination to source. The number of such values is stored in ipslaEtherJAggMeasuredNumPosDSes. |
| C32 ipslaEtherJAggMeasuredSumPosSDs | 1.3.6.1.4.1.9.9.585.1.2.1.1.13 | Counter32 | read-only | The sum of all positive jitter values for frames sent from source to destination. The number of such values is stored in ipslaEtherJAggMeasuredNumPosSDs. |
| C64 ipslaEtherJAggMeasuredTxFrmsDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.66 | Counter64 | read-only | The number of data frames sent from destination to source. |
| C64 ipslaEtherJAggMeasuredTxFrmsSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.65 | Counter64 | read-only | The number of data frames sent from source to destination. |
| G32 ipslaEtherJAggMinSucFrmLoss | 1.3.6.1.4.1.9.9.585.1.2.1.1.55 | Gauge32 | read-only | The minimum number of frames that are dropped successively. |
| G32 ipslaEtherJAggStatsBinLowerRange | 1.3.6.1.4.1.9.9.585.1.2.2.1.3 | Gauge32 | not-accessible | The lower range of the bin in microseconds. |
| C32 ipslaEtherJAggStatsBinObservation | 1.3.6.1.4.1.9.9.585.1.2.2.1.5 | Counter32 | read-only | The number of observations with in the lower and upper bin range. |
| TIM ipslaEtherJAggStatsBinStartTimeId | 1.3.6.1.4.1.9.9.585.1.2.2.1.1 | TimeStamp | not-accessible | The value of sysUpTime at the time when this row was created. |
| INT ipslaEtherJAggStatsBinType | 1.3.6.1.4.1.9.9.585.1.2.2.1.2 | INTEGER | not-accessible | The type of the jitter statistics bin. |
| G32 ipslaEtherJAggStatsBinUpperRange | 1.3.6.1.4.1.9.9.585.1.2.2.1.4 | Gauge32 | not-accessible | The upper range of the bin in microseconds. |
| TIM ipslaEtherJAggStatsStartTimeId | 1.3.6.1.4.1.9.9.585.1.2.1.1.1 | TimeStamp | not-accessible | The value of sysUpTime at the time when this row was created. |
| ipslaEtherJitterAggBinEntry | 1.3.6.1.4.1.9.9.585.1.2.2.1 | not-accessible | This entry contains the objects which accumulate the results of a series of ethernet delay operation over the aggregate interval time period or a time period stored in rttMonScheduleAdminRttLife, whichever is smaller. An entry is created only if when the following objects are valid. - rttMonCtrlAdminRttType - rttMonEchoAdminProtocol The entry will start to collect data when rttMonCtrlAdminStatus is in 'active' state. The entry will be removed when the rttMonCtrlAdminStatus is changed to 'destroy' state. | |
| ipslaEtherJitterAggBinTable | 1.3.6.1.4.1.9.9.585.1.2.2 | not-accessible | This table contains summarized information of the forward/backward/two-way delay bin and forward positive/negative, backward positive/negative and two-way positive/negative bin results for a conceptual control row. A rolling accumulated history of this information is maintained in a series of history interval 'group(s)'. When ipslaEtherJAggStatsStartTimeId groups exceeds the number of the history intervals, the oldest corresponding history interval will be deleted and will be replaced with the new history interval group. | |
| ipslaEtherJitterAggStatsEntry | 1.3.6.1.4.1.9.9.585.1.2.1.1 | not-accessible | This entry contains the objects which accumulate the results of a series of 'ethernetJitter' operations over a 60 minute time period or a time period stored in rttMonScheduleAdminRttLife, whichever is smaller. An entry is created only if when the following objects are valid. - rttMonCtrlAdminRttType - rttMonEchoAdminProtocol The entry will start to collect data when rttMonCtrlAdminStatus is in 'active' state. The entry will be removed when the rttMonCtrlAdminStatus is changed to 'destroy' state. | |
| ipslaEtherJitterAggStatsTable | 1.3.6.1.4.1.9.9.585.1.2.1 | not-accessible | The 'ethernetJitter' statistics table contains summarized information of the results for a conceptual control row. A rolling accumulated history of this information is maintained in a series of hourly 'group(s)'. When ipslaEtherJAggStatsStartTimeId groups exceeds the rttMonStatisticsAdminNumHourGroups value, the oldest corresponding hourly group will be deleted and will be replaced with the new ipslaEtherJAggStatsStartTimeId hourly group. | |
| G32 ipslaEtherJitterLatestAvgDSJ | 1.3.6.1.4.1.9.9.585.1.3.1.1.46 | Gauge32 | read-only | The average of positive and negative jitter values from destination to source. |
| G32 ipslaEtherJitterLatestAvgJitter | 1.3.6.1.4.1.9.9.585.1.3.1.1.44 | Gauge32 | read-only | The average of positive and negative jitter values in Source-to-Destination and Destination-to-Source direction. |
| G32 ipslaEtherJitterLatestAvgSDJ | 1.3.6.1.4.1.9.9.585.1.3.1.1.45 | Gauge32 | read-only | The average of positive and negative jitter values from source to destination. |
| G32 ipslaEtherJitterLatestFrmLateA | 1.3.6.1.4.1.9.9.585.1.3.1.1.32 | Gauge32 | read-only | The number of frames that arrived after the timeout. |
| G32 ipslaEtherJitterLatestFrmLossDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.27 | Gauge32 | read-only | The number of frames lost when sent from destination to source. |
| G32 ipslaEtherJitterLatestFrmLossSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.26 | Gauge32 | read-only | The number of frames lost when sent from source to destination. |
| G32 ipslaEtherJitterLatestFrmMIA | 1.3.6.1.4.1.9.9.585.1.3.1.1.29 | Gauge32 | read-only | The number of frames that are lost for which we cannot determine the direction. |
| G32 ipslaEtherJitterLatestFrmOutSeq | 1.3.6.1.4.1.9.9.585.1.3.1.1.28 | Gauge32 | read-only | The number of frames arrived out of sequence. |
| G32 ipslaEtherJitterLatestFrmSkipped | 1.3.6.1.4.1.9.9.585.1.3.1.1.30 | Gauge32 | read-only | The number of frames in the operation that could not be initiated due to an internal error. |
| G32 ipslaEtherJitterLatestIAJIn | 1.3.6.1.4.1.9.9.585.1.3.1.1.50 | Gauge32 | read-only | Inter-arrival jitter (RFC 1889) at source. |
| G32 ipslaEtherJitterLatestIAJOut | 1.3.6.1.4.1.9.9.585.1.3.1.1.49 | Gauge32 | read-only | Inter-arrival jitter (RFC 1889) at responder. |
| G32 ipslaEtherJitterLatestMaxNegDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.22 | Gauge32 | read-only | The maximum of all negative jitter values for frames sent from destination to source. |
| G32 ipslaEtherJitterLatestMaxNegSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.12 | Gauge32 | read-only | The maximum of absolute values of all negative jitter values for frames sent from source to destination. |
| G32 ipslaEtherJitterLatestMaxPosDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.17 | Gauge32 | read-only | The maximum of all positive jitter values for frames sent from destination to source. |
| G32 ipslaEtherJitterLatestMaxPosSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.7 | Gauge32 | read-only | The maximum of all positive jitter values for frames sent from source to destination. |
| G32 ipslaEtherJitterLatestMaxSucFrmL | 1.3.6.1.4.1.9.9.585.1.3.1.1.34 | Gauge32 | read-only | The maximum number of frames that are dropped successively. |
| G32 ipslaEtherJitterLatestMinNegDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.21 | Gauge32 | read-only | The minimum of all negative jitter values for frames sent from destination to source. |
| G32 ipslaEtherJitterLatestMinNegSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.11 | Gauge32 | read-only | The minimum of absolute values of all negative jitter values for frames sent from source to destination. |
| G32 ipslaEtherJitterLatestMinPosDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.16 | Gauge32 | read-only | The minimum of all positive jitter values for frames sent from destination to source. |
| G32 ipslaEtherJitterLatestMinPosSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.6 | Gauge32 | read-only | The minimum of all positive jitter values for frames sent from source to destination. |
| G32 ipslaEtherJitterLatestMinSucFrmL | 1.3.6.1.4.1.9.9.585.1.3.1.1.33 | Gauge32 | read-only | The minimum number of frames that are dropped successively. |
| G32 ipslaEtherJitterLatestNumNegDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.23 | Gauge32 | read-only | The number of all negative jitter values for frames sent from destination to source. |
| G32 ipslaEtherJitterLatestNumNegSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.13 | Gauge32 | read-only | The number of all negative jitter values for frames sent from source to destination. |
| G32 ipslaEtherJitterLatestNumOverThresh | 1.3.6.1.4.1.9.9.585.1.3.1.1.52 | Gauge32 | read-only | The number of RTT's that were over the threshold value. |
| G32 ipslaEtherJitterLatestNumOW | 1.3.6.1.4.1.9.9.585.1.3.1.1.43 | Gauge32 | read-only | The number of successful one way trip time measurements. |
| G32 ipslaEtherJitterLatestNumPosDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.18 | Gauge32 | read-only | The number of all positive jitter values for frames sent from destination to source. |
| G32 ipslaEtherJitterLatestNumPosSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.8 | Gauge32 | read-only | The number of all positive jitter values for frames sent from source to destination. |
| G32 ipslaEtherJitterLatestNumRTT | 1.3.6.1.4.1.9.9.585.1.3.1.1.1 | Gauge32 | read-only | The number of RTT's that were successfully measured. |
| G32 ipslaEtherJitterLatestOWAvgDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.48 | Gauge32 | read-only | The average one way trip time from destination to source. |
| G32 ipslaEtherJitterLatestOWAvgSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.47 | Gauge32 | read-only | The average one way trip time from source to destination. |
| G32 ipslaEtherJitterLatestOWMaxDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.42 | Gauge32 | read-only | The maximum of all one way trip time from destination to source. |
| G32 ipslaEtherJitterLatestOWMaxSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.38 | Gauge32 | read-only | The maximum of all one way trip time from source to destination. |
| G32 ipslaEtherJitterLatestOWMinDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.41 | Gauge32 | read-only | The minimum of all one way trip time from destination to source. |
| G32 ipslaEtherJitterLatestOWMinSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.37 | Gauge32 | read-only | The minimum of all one way trip time from source to destination. |
| G32 ipslaEtherJitterLatestOWSum2DS | 1.3.6.1.4.1.9.9.585.1.3.1.1.40 | Gauge32 | read-only | The sum of squares of one way trip time from destination to source. |
| G32 ipslaEtherJitterLatestOWSum2SD | 1.3.6.1.4.1.9.9.585.1.3.1.1.36 | Gauge32 | read-only | The sum of squares of one way trip time from source to destination. |
| G32 ipslaEtherJitterLatestOWSumDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.39 | Gauge32 | read-only | The sum of one way trip time from destination to source. |
| G32 ipslaEtherJitterLatestOWSumSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.35 | Gauge32 | read-only | The sum of one way trip time from source to destination. |
| G32 ipslaEtherJitterLatestRTTMax | 1.3.6.1.4.1.9.9.585.1.3.1.1.5 | Gauge32 | read-only | The maximum of RTT's that were successfully measured. |
| G32 ipslaEtherJitterLatestRTTMin | 1.3.6.1.4.1.9.9.585.1.3.1.1.4 | Gauge32 | read-only | The minimum of RTT's that were successfully measured. |
| G32 ipslaEtherJitterLatestRTTSum | 1.3.6.1.4.1.9.9.585.1.3.1.1.2 | Gauge32 | read-only | The sum of RTT's that are successfully measured. The number of successfully measured RTT is stored in ipslaEtherJitterLatestNumRTT. |
| G32 ipslaEtherJitterLatestRTTSum2 | 1.3.6.1.4.1.9.9.585.1.3.1.1.3 | Gauge32 | read-only | The sum of squares of RTT's that are successfully measured. |
| RTT ipslaEtherJitterLatestSense | 1.3.6.1.4.1.9.9.585.1.3.1.1.31 | RttResponseSense | read-only | An application specific sense code for the completion status. |
| ipslaEtherJitterLatestStatsEntry | 1.3.6.1.4.1.9.9.585.1.3.1.1 | not-accessible | A collection of objects that record the latest Ethernet jitter operation. An entry is created only when the following objects are valid. - rttMonCtrlAdminRttType - rttMonEchoAdminProtocol The entry will start to collect data when rttMonCtrlAdminStatus is in 'active' state. The entry will be removed when the rttMonCtrlAdminStatus is changed to 'destroy' state. | |
| ipslaEtherJitterLatestStatsTable | 1.3.6.1.4.1.9.9.585.1.3.1 | not-accessible | The 'ethernetJitter' operation sends out frames at the frequency specified by rttMonCtrlAdminFrequency. This table contains the statistics calculated for the latest sent frames. Each conceptual row in this table corresponds to an 'ethernetJitter' operation defined in rttMonCtrlAdminTable and has same index as rttMonCtrlAdminTable. | |
| G32 ipslaEtherJitterLatestSum2NegDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.25 | Gauge32 | read-only | The sum of squares of all negative jitter values for frames sent from destination to source. |
| G32 ipslaEtherJitterLatestSum2NegSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.15 | Gauge32 | read-only | The sum of square of all negative jitter values for frames sent from source to destination. |
| G32 ipslaEtherJitterLatestSum2PosDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.20 | Gauge32 | read-only | The sum of squares of all positive jitter values for frames sent from destination to source. |
| G32 ipslaEtherJitterLatestSum2PosSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.10 | Gauge32 | read-only | The sum of square of all positive jitter values for frames sent from source to destination. |
| G32 ipslaEtherJitterLatestSumNegDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.24 | Gauge32 | read-only | The sum of all negative jitter values for frames sent from destination to source. The number of such values is stored in ipslaEtherJitterLatestNumNegDS. |
| G32 ipslaEtherJitterLatestSumNegSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.14 | Gauge32 | read-only | The sum of all negative jitter values for frames sent from source to destination. The number of such values is stored in ipslaEtherJitterLatestNumNegSD. |
| G32 ipslaEtherJitterLatestSumPosDS | 1.3.6.1.4.1.9.9.585.1.3.1.1.19 | Gauge32 | read-only | The sum of all positive jitter values for frames sent from destination to source. The number of such values is stored in ipslaEtherJitterLatestNumPosDS. |
| G32 ipslaEtherJitterLatestSumPosSD | 1.3.6.1.4.1.9.9.585.1.3.1.1.9 | Gauge32 | read-only | The sum of all positive jitter values for frames sent source to destination. The number of such values is stored in ipslaEtherJitterLatestNumPosSD. |
| G32 ipslaEtherJLatestFrmUnProcessed | 1.3.6.1.4.1.9.9.585.1.3.1.1.51 | Gauge32 | read-only | The number of frames in the operation that could not be processed due to high CPU load. |
| C64 ipslaEtherLossAggMeasuredLostFrmsDS | 1.3.6.1.4.1.9.9.585.1.2.1.1.125 | Counter64 | read-only | The number of data frames lost from destination to source. |
| C64 ipslaEtherLossAggMeasuredLostFrmsSD | 1.3.6.1.4.1.9.9.585.1.2.1.1.124 | Counter64 | read-only | The number of data frames lost from source to destination. |
| ipslaEthernetGrpCtrl | 1.3.6.1.4.1.9.9.585.1.1 | |||
| LAY ipslaEthernetGrpCtrlCOS | 1.3.6.1.4.1.9.9.585.1.1.1.1.15 | Layer2Cos | read-create | This object specifies the Class Of Service field in an Ethernet frame header. |
| NUM ipslaEthernetGrpCtrlDomainName | 1.3.6.1.4.1.9.9.585.1.1.1.1.12 | Dot1agCfmMaintDomainName | read-create | This object specifies the maintenance domain name to be used by the Auto-Ethernet-CFM operation. The Auto-Ethernet-CFM operation discovers all the MEPs participating in the VLAN specified by ipslaEthernetGrpCtrlVLAN within this maintenance domain and create IP SLA operations for each MEP corresponding to value specified in ipslaEthernetGrpCtrlRttType. As long as the value of this object is specified, the value of ipslaEthernetGrpCtrlDomainNameType must be set to 'charString'. |
| NUM ipslaEthernetGrpCtrlDomainNameType | 1.3.6.1.4.1.9.9.585.1.1.1.1.11 | Dot1agCfmMaintDomainNameType | read-create | This object specifies the type of maintenance domain name to be used by the Auto-Ethernet-CFM operation. This object can only be set to the following values: 'none'(1) 'charString'(4) Other values are not supported. Value 'none' means that the ipslaEthernetGrpCtrlDomainName has not been specified. |
| ipslaEthernetGrpCtrlEntry | 1.3.6.1.4.1.9.9.585.1.1.1.1 | not-accessible | A collection of objects that define a conceptual Auto-Ethernet-CFM control row. The following objects must be specified in order to create this conceptual row. - ipslaEthernetGrpCtrlStatus - ipslaEthernetGrpCtrlRttType The following objects must be specified in order to activate this conceptual row. - ipslaEthernetGrpCtrlVLAN OR - ipslaEthernetGrpCtrlEVC - ipslaEthernetGrpCtrlDomainName - ipslaEthernetGrpSchedulePeriod - ipslaEthernetGrpScheduleRttStartTime This conceptual row can be delete at any time by set the ipslaEthernetGrpCtrlStatus to 'destroy'. When this row is deleted, All the IP SLA operations created by this row will be destroyed. | |
| STR ipslaEthernetGrpCtrlEVC | 1.3.6.1.4.1.9.9.585.1.1.1.1.21 | SnmpAdminString | read-create | This object specifies the Ethernet Virtual Connection for which the Auto-Ethernet-CFM operation will be used. It is an unique identifier for a service instance within a Maintenance Domain specified by ipslaEthernetGrpCtrlDomainName. The Auto-Ethernet-CFM will find all the MEPs participating in this Ethernet Virtual Connection and create IP SLA operations for each MEP corresponding to value specified in ipslaEthernetGrpCtrlRttType. The value of this object is in effect only when the value of ipslaEthernetGrpCtrlServiceInsType is set to 'evc'. |
| RTT ipslaEthernetGrpCtrlIndex | 1.3.6.1.4.1.9.9.585.1.1.1.1.1 | RttMonCtrlIndex | not-accessible | This object indicates a row in the ipslaEthernetGrpCtrlTable. This value is a pseudo-random number selected by the management station when creating a row via the ipslaEthernetGrpCtrlStatus object. For easy management, user can select range of numbers for different maintenance domain. For instance, the ipslaEthernetGrpCtrlIndex 1-100 will be used for Domain_A, 101-200 will be used for Domain_B. If the pseudo-random number is already in use an 'inconsistentValue' return code will be returned when set operation is attempted. |
| U32 ipslaEthernetGrpCtrlInterval | 1.3.6.1.4.1.9.9.585.1.1.1.1.16 | Unsigned32 | read-create | This value specifies the inter-frame delay between Ethernet frames that need to be transmitted to the target MEPs. This object is applicable to 'ethernetJitter' operation only. |
| RTT ipslaEthernetGrpCtrlMPIDExLst | 1.3.6.1.4.1.9.9.585.1.1.1.1.14 | RttMonIdLst | read-create | This object specifies the identifiers of the MEPs that will be excluded when create IP SLA operations by Auto-Ethernet-CFM operation. |
| U32 ipslaEthernetGrpCtrlNumFrames | 1.3.6.1.4.1.9.9.585.1.1.1.1.17 | Unsigned32 | read-create | This value specifies the number of Ethernet frames that need to be transmitted to the target MEPs. This object is applicable to 'ethernetJitter' operation only. |
| STR ipslaEthernetGrpCtrlOwner | 1.3.6.1.4.1.9.9.585.1.1.1.1.5 | SnmpAdminString | read-create | A string which used by a managing application to identify the entity that created this Auto-Ethernet-CFM. |
| RTT ipslaEthernetGrpCtrlProbeList | 1.3.6.1.4.1.9.9.585.1.1.1.1.9 | RttMonIdLst | read-only | This object indicates the identifiers of the IP SLA operations that are created by the Auto-Ethernet-CFM. The identifier will be stored in rttMonCtrlAdminIndex defined in CISCO-RTTMON-MIB for each IP SLA operation. |
| U32 ipslaEthernetGrpCtrlReqDataSize | 1.3.6.1.4.1.9.9.585.1.1.1.1.13 | Unsigned32 | read-create | This object specifies the padding that needs to be inserted into each ethernet frame of the IP SLA operation. The total ethernet frame size of the IP SLA operation is: CFM_header + TLVs + si_length + dm_length + padding size where dm_length = number of octets of the maintenance domain name si_length = number of octets of the service instance name CFM_header = 8 octets TLVs = 60 octets for 'ethernetPing' 45 octets for 'ethernetJitter' If the total frame size exceeds 1500, only 1500 will be sent to the target MEP. |
| RTT ipslaEthernetGrpCtrlRttType | 1.3.6.1.4.1.9.9.585.1.1.1.1.4 | RttMonRttType | read-create | The type of IP SLA operation to be created by this Auto-Ethernet-CFM. This value can only be set to type 'ethernetPing' and 'ethernetJitter'. 'ethernetPing' operation sends the regular 802.1ag loopback frame to the target MEP to monitor the connectivity and perform delay analysis. 'ethernetJitter'sends multiple enhanced CFM frames at a specified interval to the target MEP to measure metrics such as RTT, jitter, frame loss, one-way latency and so on. This value must be set before setting any other parameter configuration of an Auto-Ethernet-CFM. |
| INT ipslaEthernetGrpCtrlServiceInsType | 1.3.6.1.4.1.9.9.585.1.1.1.1.22 | INTEGER | read-create | This object specifies the type of service instance to be used by the Auto-Ethernet-CFM operation. When this object is set to value 'vlan', ipslaEthernetGrpCtrlVLAN must be set, and the value of ipslaEthernetGrpCtrlVLAN will be used by the Auto-Ethernet-CFM to discover the participating MEPs. When this object is set to value 'evc', ipslaEthernetGrpCtrlEVC must be set, and the value of ipslaEthernetGrpCtrlEVC will be used by the Auto-Ethernet-CFM to discover the participating MEPs. |
| ROW ipslaEthernetGrpCtrlStatus | 1.3.6.1.4.1.9.9.585.1.1.1.1.2 | RowStatus | read-create | This object specifies the status of Auto-Ethernet-CFM control row. Following objects must be specified in order for this object to become active. - ipslaEthernetGrpCtrlRttType - ipslaEthernetGrpCtrlVLAN OR - ipslaEthernetGrpCtrlEVC - ipslaEthernetGrpCtrlServiceInsType - ipslaEthernetGrpCtrlDomainName - ipslaEthernetGrpSchedulePeriod - ipslaEthernetGrpScheduleRttStartTime All other objects can assume default values. The following objects cannot be modified after creating the Auto-Ethernet-CFM conceptual row. - ipslaEthernetGrpCtrlRttType - ipslaEthernetGrpCtrlVLAN OR - ipslaEthernetGrpCtrlEVC - ipslaEthernetGrpCtrlDomainName - ipslaEthernetGrpCtrlServiceInsType The following objects can be modified even after creating the Auto-Ethernet-CFM conceptual row by setting this object to 'notInService' - All other writable objects in ipslaEthernetGrpCtrlTable except ipslaEthernetGrpCtrlRttType, ipslaEthernetGrpCtrlVLAN, ipslaEthernetGrpCtrlDomainName, ipslaEthernetGrpCtrlEVC and ipslaEthernetGrpCtrlServiceInsType - Objects in the ipslaEthernetGrpScheduleTable. The following objects can be modified as needed without setting this object to 'notInService' even after creating the Auto-Ethernet-CFM conceptual row. - Objects in ipslaEthernetGrpReactTable. This object can be set to 'destroy' from any value at any time. When this object is set to 'destroy' it will stop and destroy all the IP SLA operations created by this Auto-Ethernet-CFM before destroying Auto-Ethernet-CFM control row. |
| STO ipslaEthernetGrpCtrlStorageType | 1.3.6.1.4.1.9.9.585.1.1.1.1.3 | StorageType | read-create | This object specifies how the SNMP entity stores the data contained by the corresponding conceptual row. This object can be set to either 'volatile' or 'nonVolatile'. Other values are not applicable for this conceptual row and are not supported. |
| ipslaEthernetGrpCtrlTable | 1.3.6.1.4.1.9.9.585.1.1.1 | not-accessible | This table contains Auto-Ethernet-CFM control data. When a row transition to the 'active' state, the IP SLA agent will discover all the MEPs inside the specified VLAN and maintenance domain and create IP SLA ethernet operations based on the value of ipslaEthernetGrpCtrlRttType for each MEP. All the values in this table will be passed to the corresponding objects in the rttMonCtrlAdminTable and rttMonEchoAdminTable of CISCO-RTTMON-MIB so that each IP SLA Ethernet operation will have the same configuration as specified for Auto-Ethernet-CFM. - Objects in this table - Corresponding objects in rttMonCtrlAdminTable ipslaEthernetGrpCtrlStatus rttMonCtrlAdminStatus ipslaEthernetGrpCtrlRttType rttMonCtrlAdminRttType ipslaEthernetGrpCtrlOwner rttMonCtrlAdminOwner ipslaEthernetGrpCtrlTag rttMonCtrlAdminTag ipslaEthernetGrpCtrlThreshold rttMonCtrlAdminThreshold ipslaEthernetGrpCtrlTimeout rttMonCtrlAdminTimeout - Objects in this table - Corresponding objects in rttMonEchoAdminTable ipslaEthernetGrpCtrlVLAN rttMonEchoAdminTargetVLAN ipslaEthernetGrpCtrlDomainName rttMonEchoAdminTargetDomainName ipslaEthernetGrpCtrlReqDataSize rttMonEchoAdminPktDataRequestSize ipslaEthernetGrpCtrlCOS rttMonEchoAdminEthernetCOS ipslaEthernetGrpCtrlInterval rttMonEchoAdminInterval ipslaEthernetGrpCtrlNumFrames rttMonEchoAdminNumPackets ipslaEthernetGrpCtrlEVC rttMonEchoAdminTargetEVC | |
| STR ipslaEthernetGrpCtrlTag | 1.3.6.1.4.1.9.9.585.1.1.1.1.6 | SnmpAdminString | read-create | A string which used by a managing application to identify the target VLAN and maintenance domain of this Auto-Ethernet-CFM. |
| U32 ipslaEthernetGrpCtrlThreshold | 1.3.6.1.4.1.9.9.585.1.1.1.1.7 | Unsigned32 | read-create | This object specifies the threshold value of a particular object. This value will be examined for each IP SLA operations created by the Auto-Ethernet-CFM. For 'ethernetPing', if the value of rttMonLatestRttOperCompletionTime is greater than this value, the 'overThreshold' will be reported through rttMonLatestRttOperSense defined in CISCO-RTTMON-MIB. For 'ethernetJitter', if the value of ipslaEtherJitterLatestAvgJitter value is greater than this value, the 'overThreshold' will be reported through ipslaEtherJitterLatestSense defined this module. |
| U32 ipslaEthernetGrpCtrlTimeout | 1.3.6.1.4.1.9.9.585.1.1.1.1.8 | Unsigned32 | read-create | Specifies the duration to wait for an IP SLA operation created by this Auto-Ethernet-CFM to complete. For 'ethernetPing', if the value of rttMonLatestRttOperCompletionTime is greater than this value, the 'timeout' will be reported through rttMonLatestRttOperSense defined in CISCO-RTTMON-MIB. For 'ethernetJitter', if all the frames sent to target MEP have not been recievied within this duration, the 'timeout' will be reported through ipslaEtherJitterLatestSense defined this module. The value of this object cannot be set to a value which would specify a duration exceeding ipslaEthernetGrpScheduleFrequency. |
| VLA ipslaEthernetGrpCtrlVLAN | 1.3.6.1.4.1.9.9.585.1.1.1.1.10 | VlanId | read-create | This object specifies the identifier of VLAN for which the Auto-Ethernet-CFM operation will be used. It is an unique identifier for a service instance within a Maintenance Domain specified by ipslaEthernetGrpCtrlDomainName. The Auto-Ethernet-CFM will find all the MEPs participating in this VLAN and create IP SLA operations for each MEP corresponding to value specified in ipslaEthernetGrpCtrlRttType. The value of this object is in effect only when the value of ipslaEthernetGrpCtrlServiceInsType is set to 'vlan'. |
| INT ipslaEthernetGrpReactActionType | 1.3.6.1.4.1.9.9.585.1.1.2.1.10 | INTEGER | read-create | This object specifies what type of reaction to generate if an IP SLA operation violates one of the watched conditions (specified in ipslaEthernetGrpReactVar): 'none' - no reaction is generated. 'notification' - a notification is generated. |
| RTT ipslaEthernetGrpReactConfigIndex | 1.3.6.1.4.1.9.9.585.1.1.2.1.1 | RttMonCtrlIndex | not-accessible | This object along with ipslaEthernetGrpCtrlEntry identifies a particular reaction-configuration for a particular Auto-Ethernet-CFM operation. This is a pseudo-random number selected by the management station when creating a row via the ipslaEthernetGrpReactStatus. If the pseudo-random number is already in use an 'inconsistentValue' return code will be returned when set operation is attempted. |
| ipslaEthernetGrpReactEntry | 1.3.6.1.4.1.9.9.585.1.1.2.1 | not-accessible | A collection of objects that define a conceptual Auto-Ethernet-CFM reaction configuration row. In order to create this conceptual row, ipslaEthernetGrpReactStatus must be set to 'createAndGo' and ipslaEthernetGrpReactVar must be specified. This conceptual row can be deleted at any time by set ipslaEthernetGrpReactStatus to 'destroy'. When this row is deleted, the corresponding reaction configuration of all the IP SLA operations are deleted. | |
| ROW ipslaEthernetGrpReactStatus | 1.3.6.1.4.1.9.9.585.1.1.2.1.2 | RowStatus | read-create | This objects specifies the status of the conceptual Auto-Ethernet-CFM reaction control row. Only 'createAndGo' and 'destroy' operations are permitted on the row. In order for this object to become 'active', ipslaEthernetGrpReactVar must be defined. All other objects assume the default value. When this object is in 'active' state, all the writable objects except ipslaEthernetGrpReactVar can be modified. When this object moves to 'active' state, the rttMonReactStatus of the individual IP SLA operations moves to 'active' state, thus the performance parameter specified in the reaction configuration is monitored for each IP SLA operation and the notifications are generated when the threshold violation takes place. This object can be set to 'destroy' from any value at any time. When this object is set to 'destroy', the reaction configuration of both Auto-Ethernet-CFM operation and IP SLA operations are removed. |
| STO ipslaEthernetGrpReactStorageType | 1.3.6.1.4.1.9.9.585.1.1.2.1.3 | StorageType | read-create | This object specifies how the SNMP entity stores the data contained by the corresponding conceptual row. This object can be set to either 'volatile' or 'nonVolatile'. Other values are not applicable for this conceptual row and are not supported. |
| ipslaEthernetGrpReactTable | 1.3.6.1.4.1.9.9.585.1.1.2 | not-accessible | A table that contains the reaction configurations for Auto-Ethernet-CFM operation. The reaction configuration specifies the network perfomance parameter needs to be monitored, the threshold for the parameter, the type of threshold violation that will trigger a reaction, and how to react upon a threshold being violated. This allows for proactive monitoring in an environment where user can be alerted to potential network problems, rather than having to manually examine data. Each conceptual row in ipslaEthernetGrpReactTable corresponds to a reaction configured for a corresponding Auto-Ethernet-CFM operation. Each Auto-Ethernet-CFM operation can have multiple parameters monitored and hence there can be multiple reaction configuration rows for a particular Auto-Ethernet-CFM operation. The reaction configurations in this table for a particular Auto-Ethernet-CFM operation will be passed to the corresponding objects in rttMonReactTable of CISCO-RTTMON-MIB for all the IP SLA operations created by this Auto-Ethernet-CFM. This makes the IP SLA operation capable of reacting to certain measured network condition such as long round trip delay, big jitter, etc., by generating a notification to a network management application based on defined thresholds. - Objects in this table - Corresponding objects in rttMonReactTable ipslaEthernetGrpReactConfigIndex rttMonReactConfigIndex ipslaEthernetGrpReactVar rttMonReactVar ipslaEthernetGrpReactThresholdType rttMonReactThresholdType ipslaEthernetGrpReactThresholdRising rttMonReactThresholdRising ipslaEthernetGrpReactThresholdFalling rttMonReactThresholdFalling ipslaEthernetGrpReactThresholdCountX rttMonReactThresholdCountX ipslaEthernetGrpReactThresholdCountY rttMonReactThresholdCountY ipslaEthernetGrpReactActionType rttMonReactActionType ipslaEthernetGrpReactStatus rttMonReactStatus This table is coupled with ipslaEthernetGrpCtrlTable. When an entry in the ipslaEthernetGrpCtrlTable is destroyed, the corresponding entries in this table will be destroyed too. | |
| U32 ipslaEthernetGrpReactThresholdCountX | 1.3.6.1.4.1.9.9.585.1.1.2.1.8 | Unsigned32 | read-create | If ipslaEthernetGrpReactThresholdType value is 'xOfy', this object specifies the 'x' value. If ipslaEthernetGrpReactThresholdType value is 'consecutive', this object specifies the number of consecutive occurrences that needs threshold violation before setting rttMonReactOccurred as 'true'. If ipslaEthernetGrpReactThresholdType value is 'average', this object specifies the number of samples that needs be considered for calculating average. This object has no meaning if ipslaEthernetGrpReactThresholdType has value of 'never' and 'immediate'. |
| U32 ipslaEthernetGrpReactThresholdCountY | 1.3.6.1.4.1.9.9.585.1.1.2.1.9 | Unsigned32 | read-create | This object specifies the 'y' value of the xOfy condition if ipslaEthernetGrpReactThresholdType is 'xOfy'. For other values of ipslaEthernetGrpReactThresholdType, this object is not applicable. |
| U32 ipslaEthernetGrpReactThresholdFalling | 1.3.6.1.4.1.9.9.585.1.1.2.1.7 | Unsigned32 | read-create | This object specifies the lower threshold limit. If the value of monitored parameter ( e.g rtt, jitterAvg, packetLossSD etc ) falls below this limit and if the condition specified in ipslaEthernetGrpReactThresholdType are satisfied, a notification is generated. Default value of ipslaEthernetGrpReactThresholdFalling for 'rtt' is 3000. 'jitterAvg' is 100. 'jitterSDAvg' is 100. 'jitterDSAvg' is 100. 'maxOfPositiveSD' is 10000. 'maxOfNegativeSD' is 10000. 'maxOfPositiveDS' is 10000. 'maxOfNegativeDS' is 10000. 'packetLossSD' is 10000. 'packetLossDS' is 10000. 'packetMIA' is 10000. 'packetLateArrival' is 10000. 'packetOutOfSequence' is 10000. This object is not applicable if the ipslaEthernetGrpReactVar is 'timeout' or 'connectionLoss'. For 'timeout' and 'connectionLoss', the default value will be 0. |
| U32 ipslaEthernetGrpReactThresholdRising | 1.3.6.1.4.1.9.9.585.1.1.2.1.6 | Unsigned32 | read-create | This object specifies the higher threshold limit. If the value of monitored parameter ( e.g rtt, jitterAvg, packetLossSD etc ) rises above this limit and if the condition specified in ipslaEthernetGrpReactThresholdType are satisfied, a notification is generated. Default value of ipslaEthernetGrpReactThresholdRising for 'rtt' is 5000. 'jitterAvg' is 100. 'jitterSDAvg' is 100. 'jitterDSAvg' is 100. 'maxOfPositiveSD' is 10000. 'maxOfNegativeSD' is 10000. 'maxOfPositiveDS' is 10000. 'maxOfNegativeDS' is 10000. 'packetLossSD' is 10000. 'packetLossDS' is 10000. 'packetMIA' is 10000. 'packetLateArrival' is 10000. 'packetOutOfSequence' is 10000. This object is not applicable if the ipslaEthernetGrpReactVar is 'timeout' or 'connectionLoss'. For 'timeout' and 'connectionLoss', the default value will be 0. |
| INT ipslaEthernetGrpReactThresholdType | 1.3.6.1.4.1.9.9.585.1.1.2.1.5 | INTEGER | read-create | This object specifies the type of threshold violation that will trigger an notification. The notification will be sent accordingly only when the object rttMonReactOccurred which is defined in CISCO-RTTMON-MIB for IP SLA operation is set to 'true' or 'false'. 'never' - rttMonReactOccurred is never set 'immediate' - rttMonReactOccurred is set to 'true' when the value of parameter for which reaction is configured ( e.g. rtt, jitterAvg) violates the threshold. Conversely, rttMonReactOccurred is set to 'false' when the parameter ( e.g. rtt, jitterAvg) is below the threshold limits. 'consecutive'- rttMonReactOccurred is set to true when the value of parameter for which reaction is configured ( e.g. rtt, jitterAvg) violates the threshold for configured consecutive times. Conversely, rttMonReactOccurred is set to false when the value of parameter ( e.g. rtt, jitterAvg) is below the threshold limits for the same number of consecutive operations. 'xOfy' - rttMonReactOccurred is set to true when x ( as specified by ipslaEthernetGrpReactThresholdCountX ) out of the last y ( as specified by ipslaEthernetGrpReactThresholdCountY ) times the value of parameter for which the reaction is configured ( e.g. rtt, jitterAvg) violates the threshold. Conversely, it is set to false when x, out of the last y times the value of parameter ( e.g. rtt, jitterAvg) is below the threshold limits. 'average' - rttMonReactOccurred is set to true when the average (ipslaEthernetGrpReactThresholdCountX times ) value of parameter for which reaction is configured ( e.g. rtt, jitterAvg) violates the threshold condition. Conversely, it is set to false when the average value of parameter ( e.g. rtt, jitterAvg). |
| RTT ipslaEthernetGrpReactVar | 1.3.6.1.4.1.9.9.585.1.1.2.1.4 | RttMonReactVar | read-create | This object specifies the performance parameter that will be monitored by the IP SLA operations which are created via Auto-Ethernet-CFM operation. The performance parameters that are valid to both 'ethernetJitter' and 'ethernetPing' include: - 'connectionLoss' - 'rtt' - 'timeout' The performance parameters that are only valid to 'ethernetJitter' include: - 'jitterSDAvg' - 'jitterDSAvg' - 'jitterAvg' - 'maxOfPositiveSD' - 'maxOfNegativeSD' - 'maxOfPositiveDS' - 'maxOfNegativeDS' - 'packetLateArrival' - 'packetLossDS' - 'packetLossSD' - 'packetOutOfSequence' - 'packetMIA' |
| U32 ipslaEthernetGrpScheduleFrequency | 1.3.6.1.4.1.9.9.585.1.1.1.1.20 | Unsigned32 | read-create | Specifies the duration between initiating each IP SLA operation created by the Auto-Ethernet-CFM. Take above example, if the ipslaEthernetGrpScheduleFrequency is set to 60, then the start time of each IP SLA operation like: start time: T+0 -------- T+9 ----------T+19----- operation1 operation2 operation3 start again: --T+60-------- T+69 ----------T+79-- operation1 operation2 operation3 start 3rd time:--T+120-------- T+129 ----------T+139-- operation1 operation2 operation3 This object cannot be set to a value which would be a shorter duration than ipslaEthernetGrpCtrlTimeout. The default value of this object is the value set to ipslaEthernetGrpSchedulePeriod. This value will be passed to rttMonCtrlAdminFrequency for all the IP SLA operations created by the Auto-Ethernet-CFM. |
| U32 ipslaEthernetGrpSchedulePeriod | 1.3.6.1.4.1.9.9.585.1.1.1.1.19 | Unsigned32 | read-create | Specifies the time duration over which all the IP SLA operations created by the current Auto-Ethernet-CFM have to be scheduled. For instance, if there are three MEPs discovered, there will be three IP SLA operations created. If this object is set to 30, ipslaEthernetGrpScheduleRttStartTime is set to T, the start time of three operations will be spreaded evenly within 30 seconds, i.e. start time: T+0 -------- T+9 ----------T+19 operation1 operation2 operation3 This object must be set first before setting ipslaEthernetGrpScheduleRttStartTime. |
| TIK ipslaEthernetGrpScheduleRttStartTime | 1.3.6.1.4.1.9.9.585.1.1.1.1.18 | TimeTicks | read-create | This object specifies the time when this conceptual row will become 'active'. ipslaEthernetGrpSchedulePeriod object must be specified before setting this object. When sysUpTime equals this value, this object will cause the conceptual Auto-Ethernet-CFM row transmit to 'active'and start to discover the existing MEPs. Meanwhile the IP SLA operations will be created for each discovered MEP, and rttMonCtrlAdminStatus of each IP SLA operation will transmit to 'active'. If this object has value as 1, the conceptual Auto-Ethernet-CFM row will transmit to 'active' right now. Value of 0 puts this conceptual row in pending state. |
| ipslaEthernetLatestOper | 1.3.6.1.4.1.9.9.585.1.3 | |||
| ipslaEthernetStats | 1.3.6.1.4.1.9.9.585.1.2 |
RFC description
Manages IP SLA Ethernet operations including auto-Ethernet-CFM control, jitter statistics, and active monitoring of network performance on Ethernet segments.
Start monitoring Cisco switches/routers running IP SLA over Ethernet with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.