All MIBs › CISCO-MLD-SNOOPING-MIB
Organization: Cisco Systems, Inc.
Last Updated: 2010-07-02
Category: Cisco Devices, IP and Core Protocols, VLAN and Bridging
Description: Manages Multicast Listener Discovery (MLD) snooping for IPv6 multicast traffic control on Cisco switches.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCO-MLD-SNOOPING-MIB?
CISCO-MLD-SNOOPING-MIB is a Cisco enterprise MIB for switches that implement Multicast Listener Discovery (MLD) snooping, the IPv6 analogue of IGMP snooping that restricts multicast traffic delivery to ports with interested listeners. It exposes configuration objects for snooping profiles, including profile name, storage type, minimum MLD version, associated IP address, robustness variable, and querier behavior such as internal querier enable and last-member-query timing. Its monitoring value centers on multicast-forwarding software state and configuration correctness rather than physical hardware, letting administrators confirm which profiles are active, whether an internal querier is enabled, and whether snooping parameters match expected multicast deployment design. It builds on and complements the IETF IGMP/MLD snooping model and is designed to work per virtual system or bridge domain via SNMP context, implying dependency on VLAN/L2VPN context conventions. It is deployed on Cisco Layer 2/Layer 3 switches carrying IPv6 multicast traffic, where CISCO-MLD-SNOOPING-MIB SNMP monitoring supports IPTV or other multicast-application environments.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-MLD-SNOOPING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco Layer 2/Layer 3 switch
Monitoring Examples
An administrator would walk cmsProfileTable/cmsProfileEntry to check cmsProfileStatus and cmsProfileSnoopMinVersion for each configured profile, confirming the profile is active and enforcing the intended minimum MLD version. Reviewing cmsProfileInternalQuerier alongside cmsProfileLastMemberQueryInterval and cmsProfileLastMemberQueryCount would reveal whether the switch's internal querier timing matches expected leave-latency requirements. A profile with cmsProfileStatus showing inactive, or query intervals set far outside standard defaults, would explain excessive multicast traffic flooding or slow leave processing on a VLAN.
What Can Be Monitored
- MLD snooping profile status
- minimum MLD version enforced
- internal querier enable state
- robustness variable
- last-member-query interval and count
- associated IP address/type per profile
This MIB depends on
Related MIBs
Imported Objects
From CISCO-SMI
| ciscoMgmt | OBJECT-IDENTITY |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| StorageType | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using cmsSysIntQuerierRxGeneralQueries OID:
Select a Cisco Layer 2/Layer 3 switch (MLD snooping) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cmsSysIntQuerierRxGeneralQueries into the Find box to locate it in the OID tree, then select it and click OK. This object indicates the number of general queries received by the internal querier. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in packets), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ciscoMldSnoopingMIB | 1.3.6.1.4.1.9.9.721 | This MIB module defines objects that describe IGMP/MLD snooping. It provides remote network management system the ability to manage the IGMP/MLD Snooping feature when snooping is operating at the system and port level. Virtual systems and related ports data can be accessed by NMS using appropriate SNMP context. E.g. in order to access data related to a particular L2VPN bridge domain system, the user shall specify on the SNMP request the SNMP context related to that particular bridge domain. Glossary of terms: GMI - Group Management Interval; it controls when the IGMP/MLD snooping expires stale group membership states. L2VPN - Layer 2 Virtual Private Network. IGMP - Internet Group Management Protocol. MLD - Multicast Listener Discovery. MRT - Max Response Time. TTL - Time To Live. PIM - Protocol Independent Multicast. TCN - Topology Change Notification. Querier - External IGMP/MLD router sending out queries which are flooded in the system (e.g a bridge domain). Internal Querier - Virtual Querier that solicits periodic membership reports by sending IGMP/MLD general queries out of all system ports. Winner/Looser Querier - A system can only have one active querier at a time, if the internal querier receives queries from another querier it performs querier election, the lowest IP address wins. G-Query - General IGMP/MLD Query. Solicitation - a global leave message with a NULL group multicast address, when the upstream router receives this solicitation, it immediately issues an general query. | ||
| ciscoMldSnoopingMIBCompliance | 1.3.6.1.4.1.9.9.721.2.1.1 | The basic implementation requirements for agents that support the CISCO-MLD-SNOOPING-MIB. | ||
| ciscoMldSnoopingMIBCompliances | 1.3.6.1.4.1.9.9.721.2.1 | |||
| ciscoMldSnoopingMIBConfigDetailedObjectGroup | 1.3.6.1.4.1.9.9.721.2.2.2 | A collections of objects representing the detailed configuration elements of CISCO-MLD-SNOOPING-MIB. | ||
| ciscoMldSnoopingMIBConfigMainObjectGroup | 1.3.6.1.4.1.9.9.721.2.2.1 | A collections of objects representing the main configuration elements of CISCO-MLD-SNOOPING-MIB. | ||
| ciscoMldSnoopingMIBConform | 1.3.6.1.4.1.9.9.721.2 | |||
| ciscoMldSnoopingMIBGroups | 1.3.6.1.4.1.9.9.721.2.2 | |||
| ciscoMldSnoopingMIBInfoMainObjectGroup | 1.3.6.1.4.1.9.9.721.2.2.3 | A collections of objects representing the main operational elements of CISCO-MLD-SNOOPING-MIB. | ||
| ciscoMldSnoopingMIBNotifs | 1.3.6.1.4.1.9.9.721.0 | |||
| ciscoMldSnoopingMIBObjects | 1.3.6.1.4.1.9.9.721.1 | |||
| ciscoMldSnoopingMIBStatsDetailedObjectGroup | 1.3.6.1.4.1.9.9.721.2.2.5 | A collections of objects representing the detailed statistical elements of CISCO-MLD-SNOOPING-MIB. | ||
| ciscoMldSnoopingMIBStatsMainObjectGroup | 1.3.6.1.4.1.9.9.721.2.2.4 | A collections of objects representing the main statistical elements of CISCO-MLD-SNOOPING-MIB. | ||
| cmsConfigPortEntry | 1.3.6.1.4.1.9.9.721.1.1.2.1 | not-accessible | An entry describes the configuration associated with a port. A peer SNMP entity may create a port config by setting an instance of cmsConfigPortStatus to 'createAndWait' or 'createAndGo'. Observe that an implementation that does not support these options must specify these limitations in an agent capabilities statement. Other management entities (e.g., the local console) may perform actions resulting in the creation of a member link. In these cases, the system must automatically create a row in the cmsConfigPortTable. A peer SNMP entity may destroy a port config by setting the corresponding instance of cmsConfigPortStatus to 'destroy'. Observe that an implementation that does not support this option must specify this limitation in an agent capabilities statement. Other management entities may perform actions resulting in the destruction of a profile. In these cases, the system must automatically destroy the corresponding row in the cmsConfigPortTable. | |
| STR cmsConfigPortProfileName | 1.3.6.1.4.1.9.9.721.1.1.2.1.5 | SnmpAdminString | read-create | This object specifies the name of the profile contained by the cmsProfileTable associated with the system port identified by the table entry indices. |
| ROW cmsConfigPortStatus | 1.3.6.1.4.1.9.9.721.1.1.2.1.3 | RowStatus | read-create | This object specifies the status of the row. The following columns must be valid before activating a row: - cmsConfigPortProfileName However, this objects specify a valid default value. Thus, it is possible to use create-and-go row creation semantics without setting additional columns. An implementation must allow an EMS/NMS to modify any column when this column is 'active' |
| STO cmsConfigPortStorageType | 1.3.6.1.4.1.9.9.721.1.1.2.1.4 | StorageType | read-create | This object specifies the storage type of this conceptual row. |
| cmsConfigPortTable | 1.3.6.1.4.1.9.9.721.1.1.2 | not-accessible | This table lists snooping configuration for each port. | |
| STR cmsConfigSystemProfileName | 1.3.6.1.4.1.9.9.721.1.1.3 | SnmpAdminString | read-only | This object indicates the IGMP/MLD profile name associated to the system. It corresponds to an entry on cmsProfileTable where the complete set of configuration parameters are stored. |
| cmsConfiguration | 1.3.6.1.4.1.9.9.721.1.1 | |||
| cmsMcastInfoEntry | 1.3.6.1.4.1.9.9.721.1.3.10.1 | not-accessible | An entry describes the multicast operational data for the group/source addresses associated to a port. The system creates a row in this table for each port and group/source address configured on the snooping profile associated to that port. The system destroy a row on this table when the related group/source configuration is removed form the profile associated to that port. If a port is associated with a profile not defining any static group/source there will not be any entry for that port on this table. | |
| U32 cmsMcastInfoExpiry | 1.3.6.1.4.1.9.9.721.1.3.10.1.5 | Unsigned32 | read-only | This object indicates the multicast group expiry time. When this timer expires the group membership is removed from the port. |
| INT cmsMcastInfoFlag | 1.3.6.1.4.1.9.9.721.1.3.10.1.6 | INTEGER | read-only | This object indicates the multicast flag associated with the group/source related to the indices: 'static' - The group state is configured via snooping profile 'dynamic' - The group state is learnt as a result of receiving IGMP/MLD reports. 'staticAndDynamic' - The group state is both statically configured via snooping profile and learnt as a result of receiving IGMP/MLD reports. 'unknown' - The group state is not known. |
| IP cmsMcastInfoGroupAddr | 1.3.6.1.4.1.9.9.721.1.3.10.1.2 | InetAddress | not-accessible | This object uniquely identifies the IP address of the multicast group observed through IGMP/MLD snooping. |
| IPt cmsMcastInfoGroupAddrType | 1.3.6.1.4.1.9.9.721.1.3.10.1.1 | InetAddressType | not-accessible | This object indicates the IP version of cmsMcastGroupAddr and cmsMcastSourceAddr |
| INT cmsMcastInfoGroupFilter | 1.3.6.1.4.1.9.9.721.1.3.10.1.4 | INTEGER | read-only | This object indicates the multicast group filter associated with the group/source related to the indices. - 'exclude': The group filter mode is set to exclude. - 'include': The group filter mode is set to include. |
| IP cmsMcastInfoSourceAddr | 1.3.6.1.4.1.9.9.721.1.3.10.1.3 | InetAddress | not-accessible | This object indicates the IP address of a IGMP/MLD snooping source |
| cmsMcastInfoTable | 1.3.6.1.4.1.9.9.721.1.3.10 | not-accessible | This table lists the snooping multicast operational data for group/source addresses associated to a port. | |
| cmsMRouterPortInfoEntry | 1.3.6.1.4.1.9.9.721.1.3.11.1 | not-accessible | A conceptual row in the cmsMRouterPortInfoTable. There is an entry in this table for each port where IGMP/MLD snooping is configured on the system. | |
| cmsMRouterPortInfoTable | 1.3.6.1.4.1.9.9.721.1.3.11 | not-accessible | This table provides IGMP/MLD snooping operational data for the multicast router ports available on the system. | |
| INT cmsMRouterType | 1.3.6.1.4.1.9.9.721.1.3.11.1.1 | INTEGER | read-only | This object indicates the multicast router type for the port identified by the indices. 'dynamic' - indicates that the mrouter port is dynamically discovered by the system. 'static' - indicates that the mrouter ports is statically configured. 'staticAndDynamic' - indicates that the mrouter port is both static and dynamic at the same time. 'unknown' - indicates that the mrouter type is not known |
| cmsOperInfo | 1.3.6.1.4.1.9.9.721.1.3 | |||
| OID cmsPortId | 1.3.6.1.4.1.9.9.721.1.1.2.1.2 | CiscoMldPortIdentifier | not-accessible | This object indentifies the port. Depending on the cmsPortType this object will uniquely identify the port accordingly with the definition of the TC CiscoMldPortIdentifier. |
| cmsPortStats | 1.3.6.1.4.1.9.9.721.1.5 | |||
| CIS cmsPortType | 1.3.6.1.4.1.9.9.721.1.1.2.1.1 | CiscoMldPortType | not-accessible | This object indicates the port type. |
| cmsProfileEntry | 1.3.6.1.4.1.9.9.721.1.1.1.1 | not-accessible | An entry describes a IGMP/MLD snooping profile; that is a set of configuration parameters that can be applied to either systems or ports. A peer SNMP entity may create a profile by setting an instance of cmsProfileStatus to 'createAndWait' or 'createAndGo'. Observe that an implementation that does not support these options must specify these limitations in an agent capabilities statement. Other management entities (e.g., the local console) may perform actions resulting in the creation of a member link. In these cases, the system must automatically create a row in the cmsProfileTable. A peer SNMP entity may destroy a profile by setting the corresponding instance of cmsProfileStatus to 'destroy'. Observe that an implementation that does not support this option must specify this limitation in an agent capabilities statement. Other management entities may perform actions resulting in the destruction of a profile. In these cases, the system must automatically destroy the corresponding row in the cmsProfileTable. | |
| U32 cmsProfileFloodQueryCount | 1.3.6.1.4.1.9.9.721.1.1.1.1.13 | Unsigned32 | read-only | This object specifies the number of general queries for which the multicast traffic is flooded following a topology change notification, thus influencing the refresh period. |
| T/F cmsProfileImmediateLeave | 1.3.6.1.4.1.9.9.721.1.1.1.1.25 | TruthValue | read-only | This object specifies the immediate leave administrative status. A value of 'true' means that IGMP/MLD snooping will remove a Layer 2 interface from the forwarding table entry immediately, without first sending group-specific queries to the port. |
| T/F cmsProfileInternalQuerier | 1.3.6.1.4.1.9.9.721.1.1.1.1.8 | TruthValue | read-only | This object specifies the administrative status of the internal querier. A value of 'true' means that the internal querier feature is enabled. |
| U32 cmsProfileIntQuerierExpiry | 1.3.6.1.4.1.9.9.721.1.1.1.1.21 | Unsigned32 | read-only | This object specifies the internal querier time out; that is the timer set by the internal querier after an election procedure where the internal query results as loser. If this timer expires before another query is received from the election winner, the internal querier becomes the active querier. |
| U32 cmsProfileIntQuerierMaxRespTime | 1.3.6.1.4.1.9.9.721.1.1.1.1.17 | Unsigned32 | read-only | This object indicates the maximum time the querier can take to reply to a query. It is used in order to calculate the Group Management Interval (GMI): GMI = (robustness-variable * query-interval) + MRT |
| U32 cmsProfileIntQuerierQueryInterval | 1.3.6.1.4.1.9.9.721.1.1.1.1.18 | Unsigned32 | read-only | This object specifies the internal querier query interval, which should be the time gap between two consecutive queries. It is used in order to calculate the Group Management Interval (GMI): GMI = (robustness-variable * query-interval) + MRT |
| U32 cmsProfileIntQuerierTCNQueryCount | 1.3.6.1.4.1.9.9.721.1.1.1.1.19 | Unsigned32 | read-only | This object specifies the Topopogy Change Notification query count for the internal querier. |
| U32 cmsProfileIntQuerierTCNQueryInterval | 1.3.6.1.4.1.9.9.721.1.1.1.1.20 | Unsigned32 | read-only | This object specifies the internal querier TCN query interval, which should be the time gap between two consecutive TCN queries |
| CIS cmsProfileIntQuerierVersion | 1.3.6.1.4.1.9.9.721.1.1.1.1.22 | CiscoMldSnoopingVersion | read-create | This object specifies the internal querier version |
| IP cmsProfileIPAddress | 1.3.6.1.4.1.9.9.721.1.1.1.1.6 | InetAddress | read-create | This object specifies the system IP address used by IGMP/MLD snooping. |
| IPt cmsProfileIPAddrType | 1.3.6.1.4.1.9.9.721.1.1.1.1.5 | InetAddressType | read-create | This object specifies the IP address type (IPv4 or IPv6) for the objects cmsProfileIPAddress |
| U32 cmsProfileLastMemberQueryCount | 1.3.6.1.4.1.9.9.721.1.1.1.1.9 | Unsigned32 | read-only | This object specifies the profile member query count. This value is the number of group-specific queries IGMP/MLD snooping sends, in response to a leave message. |
| U32 cmsProfileLastMemberQueryInterval | 1.3.6.1.4.1.9.9.721.1.1.1.1.10 | Unsigned32 | read-only | This object specifies the query interval, which should be the time gap between two consecutive group-specific queries. |
| STR cmsProfileName | 1.3.6.1.4.1.9.9.721.1.1.1.1.1 | SnmpAdminString | not-accessible | This object indicates a text string defining the name of the profile identified by cmsProfileIndex. |
| T/F cmsProfileQuerySolicit | 1.3.6.1.4.1.9.9.721.1.1.1.1.14 | TruthValue | read-only | This object specifies the query solicit administrative status. A value of 'true' means that the feature is enabled. |
| U32 cmsProfileRobustnessVariable | 1.3.6.1.4.1.9.9.721.1.1.1.1.7 | Unsigned32 | read-create | This object specifies the robustness-variable value used to calculate the group management interval (GMI): GMI = (robustness-variable * query-interval) + MRT |
| T/F cmsProfileRouterAlertCheck | 1.3.6.1.4.1.9.9.721.1.1.1.1.16 | TruthValue | read-only | This object specifies the administrative status of the alert check feature. A value of 'true', means IGMP/MLD snooping performs the validation before processing the message. |
| T/F cmsProfileRouterGuard | 1.3.6.1.4.1.9.9.721.1.1.1.1.23 | TruthValue | read-only | This object specifies the IGMP/MLD snooping router guard configuration status. A value of 'true' means that a port cannot be dynamically discovered as an mrouter |
| CIS cmsProfileSnoopMinVersion | 1.3.6.1.4.1.9.9.721.1.1.1.1.4 | CiscoMldSnoopingVersion | read-create | This object specifies the minimum IGMP or MLD version supported by snooping in the system where the profile is applied. |
| T/F cmsProfileStaticMRouter | 1.3.6.1.4.1.9.9.721.1.1.1.1.24 | TruthValue | read-only | This object specifies the static multicast router administrative status. A value of 'true' means that the feature is enabled. |
| ROW cmsProfileStatus | 1.3.6.1.4.1.9.9.721.1.1.1.1.2 | RowStatus | read-create | This object specifies the status of the row. The following columns must be valid before activating a row: - cmsProfileStorageType - cmsProfileSnoopMinVersion - cmsProfileIPAddrType - cmsProfileIPAddress - cmsProfileRobustnessVariable - cmsProfileInternalQuerier - cmsProfileLastMemberQueryCount - cmsProfileLastMemberQueryInterval - cmsProfileProxyReporting - cmsProfileReportSuppression - cmsProfileUnsolicitedReportTimer - cmsProfileFloodQueryCount - cmsProfileQuerySolicit - cmsProfileTTLCheck - cmsProfileRouterAlertCheck - cmsProfileIntQuerierMaxRespTime - cmsProfileIntQuerierQueryInterval - cmsProfileIntQuerierRobustnessVar - cmsProfileIntQuerierTCNQueryCount - cmsProfileIntQuerierTCNQueryIntrvl - cmsProfileIntQuerierExpiry - cmsProfileIntQuerierVersion - cmsProfileRouterGuard - cmsProfileStaticMRouter - cmsProfileImmediateLeave However, these objects specify valid default values. Thus, it is possible to use create-and-go row creation semantics without setting additional columns. An implementation must allow an EMS/NMS to modify any column when this column is 'active' |
| STO cmsProfileStorageType | 1.3.6.1.4.1.9.9.721.1.1.1.1.3 | StorageType | read-create | This object specifies the storage type of this conceptual row. |
| T/F cmsProfileSuppressReport | 1.3.6.1.4.1.9.9.721.1.1.1.1.11 | TruthValue | read-only | This object specifies the configuration status of the report suppression feature. A value of 'true' means that the reports are suppressed. |
| cmsProfileTable | 1.3.6.1.4.1.9.9.721.1.1.1 | not-accessible | This table lists IGMP/MLD configuration for each profile available on the system. | |
| T/F cmsProfileTTLCheck | 1.3.6.1.4.1.9.9.721.1.1.1.1.15 | TruthValue | read-only | This object specifies administrative status of the time-to-live (TTL) check feature. A value of 'true', means IGMP/MLD snooping processes all packets by examining the TTL field in the header. |
| U32 cmsProfileUnsolicitedReportTimer | 1.3.6.1.4.1.9.9.721.1.1.1.1.12 | Unsigned32 | read-only | This object specifies the unsolicited report timer interval in minutes. The reports are forwarded at random intervals within the timeframe configured. |
| IP cmsQuerierIPAddr | 1.3.6.1.4.1.9.9.721.1.3.2 | InetAddress | read-only | This object indicates the IP address of the querier. |
| IPt cmsQuerierIPAddrType | 1.3.6.1.4.1.9.9.721.1.3.1 | InetAddressType | read-only | This object indicates the IP address type (IPv4 or IPv6) of cmsQuerierIPAddr. |
| U32 cmsQuerierMaxRespTime | 1.3.6.1.4.1.9.9.721.1.3.8 | Unsigned32 | read-only | This object indicates the maximum time the querier can take to reply to a query. |
| OID cmsQuerierPortId | 1.3.6.1.4.1.9.9.721.1.3.4 | CiscoMldPortIdentifier | read-only | This object indicates the port identifier of the querier; that is the port through which the querier's queries are received on the system. |
| CIS cmsQuerierPortType | 1.3.6.1.4.1.9.9.721.1.3.3 | CiscoMldPortType | read-only | This object indicates the port type of the querier. |
| U32 cmsQuerierQueryInterval | 1.3.6.1.4.1.9.9.721.1.3.6 | Unsigned32 | read-only | This object indicates the querier interval, which is the time gap between two consecutive queries. |
| U32 cmsQuerierRobustness | 1.3.6.1.4.1.9.9.721.1.3.7 | Unsigned32 | read-only | This object indicates the querier robustness variable. |
| U32 cmsQuerierTimeSinceLastGQuery | 1.3.6.1.4.1.9.9.721.1.3.9 | Unsigned32 | read-only | This object indicates for the querier the time interval since the last general query. |
| CIS cmsQuerierVersion | 1.3.6.1.4.1.9.9.721.1.3.5 | CiscoMldSnoopingVersion | read-only | This object indicates the querier IGMP/MLD snooping version. |
| cmsStatsPortTrfEntry | 1.3.6.1.4.1.9.9.721.1.5.1.1 | not-accessible | A conceptual row in the cmsStatsPortTrfTable. There is an entry in this table for each port where IGMP/MLD snooping is configured on the system. | |
| cmsStatsPortTrfTable | 1.3.6.1.4.1.9.9.721.1.5.1 | not-accessible | This table provides the IGMP/MLD snooping port traffic statistics. Each row contains traffic statistical data associated with a unique bridge domain port identified by the indexes. Conceptual rows can be seen by SNMP agents or NMS as containing statistical informations related to the indexes discovered on cbdBridgeDomainTable and cbdPortTable | |
| C32 cmsStsPortGrps | 1.3.6.1.4.1.9.9.721.1.5.1.1.35 | Counter32 | read-only | This object indicates the number of groups associated with the port identified by the indices |
| C32 cmsStsPortRxV3RepAllowNewSrc | 1.3.6.1.4.1.9.9.721.1.5.1.1.33 | Counter32 | read-only | This object indicates the number of V3 reports of type 'allow new source' received on the port identified by the indices |
| C32 cmsStsPortRxV3RepBlockOldSrc | 1.3.6.1.4.1.9.9.721.1.5.1.1.34 | Counter32 | read-only | This object indicates the number of V3 reports of type 'block old source' received on the port identified by the indices |
| C32 cmsStsPortRxV3RepChangeToExclude | 1.3.6.1.4.1.9.9.721.1.5.1.1.32 | Counter32 | read-only | This object indicates the number of V3 reports of type 'change to exclude' received on the port identified by the indices |
| C32 cmsStsPortRxV3RepChangeToInclude | 1.3.6.1.4.1.9.9.721.1.5.1.1.30 | Counter32 | read-only | This object indicates the number of V3 reports of type 'change to include' received on the port identified by the indices |
| C32 cmsStsPortRxV3RepIsExclude | 1.3.6.1.4.1.9.9.721.1.5.1.1.31 | Counter32 | read-only | This object indicates the number of V3 reports of type 'exclude' received on the port identified by the indices |
| C32 cmsStsPortRxV3RepIsInclude | 1.3.6.1.4.1.9.9.721.1.5.1.1.29 | Counter32 | read-only | This object indicates the number of V3 reports of type 'include' received on the port identified by the indices |
| C32 cmsStsPortSGs | 1.3.6.1.4.1.9.9.721.1.5.1.1.36 | Counter32 | read-only | This object indicates the number of sources associated with the port identified by the indices |
| C32 cmsStsPortTrfGeneralQueriesGenerated | 1.3.6.1.4.1.9.9.721.1.5.1.1.3 | Counter32 | read-only | This object indicates the number of general queries generated on the port identified by the indices |
| C32 cmsStsPortTrfGeneralQueriesReceived | 1.3.6.1.4.1.9.9.721.1.5.1.1.1 | Counter32 | read-only | This object indicates the number of general queries received on the port identified by the indices |
| C32 cmsStsPortTrfGeneralQueriesReinjected | 1.3.6.1.4.1.9.9.721.1.5.1.1.2 | Counter32 | read-only | This object indicates the number of general queries re-injected on the port identified by the indices |
| C32 cmsStsPortTrfGlobalLeavesGenerated | 1.3.6.1.4.1.9.9.721.1.5.1.1.18 | Counter32 | read-only | This object indicates the number of global leaves generated on the port identified by the indices |
| C32 cmsStsPortTrfGlobalLeavesReceived | 1.3.6.1.4.1.9.9.721.1.5.1.1.16 | Counter32 | read-only | This object indicates the number of global leaves received on the port identified by the indices |
| C32 cmsStsPortTrfGlobalLeavesReinjected | 1.3.6.1.4.1.9.9.721.1.5.1.1.17 | Counter32 | read-only | This object indicates the number of global leaves re-injected on the port identified by the indices |
| C32 cmsStsPortTrfGrpSpecificQueriesGenerated | 1.3.6.1.4.1.9.9.721.1.5.1.1.6 | Counter32 | read-only | This object indicates the number of group specific queries generated on the port identified by the indices |
| C32 cmsStsPortTrfGrpSpecificQueriesReceived | 1.3.6.1.4.1.9.9.721.1.5.1.1.4 | Counter32 | read-only | This object indicates the number of group specific queries received on the port identified by the indices |
| C32 cmsStsPortTrfGrpSpecificQueriesReinjected | 1.3.6.1.4.1.9.9.721.1.5.1.1.5 | Counter32 | read-only | This object indicates the number of group specific queries re-injected on the port identified by the indices |
| C32 cmsStsPortTrfGSSpecificQueriesGenerated | 1.3.6.1.4.1.9.9.721.1.5.1.1.9 | Counter32 | read-only | This object indicates the number of group source specific queries generated on the port identified by the indices |
| C32 cmsStsPortTrfGSSpecificQueriesReceived | 1.3.6.1.4.1.9.9.721.1.5.1.1.7 | Counter32 | read-only | This object indicates the number of group source specific queries received on the port identified by the indices |
| C32 cmsStsPortTrfGSSpecificQueriesReinjected | 1.3.6.1.4.1.9.9.721.1.5.1.1.8 | Counter32 | read-only | This object indicates the number of group source specific queries re-injected on the port identified by the indices |
| C32 cmsStsPortTrfPIMHellosGenerated | 1.3.6.1.4.1.9.9.721.1.5.1.1.21 | Counter32 | read-only | This object indicates the number of PIM hellos generated on the port identified by the indices |
| C32 cmsStsPortTrfPIMHellosReceived | 1.3.6.1.4.1.9.9.721.1.5.1.1.19 | Counter32 | read-only | This object indicates the number of PIM hellos received on the port identified by the indices |
| C32 cmsStsPortTrfPIMHellosReinjected | 1.3.6.1.4.1.9.9.721.1.5.1.1.20 | Counter32 | read-only | This object indicates the number of PIM hellos re-injected on the port identified by the indices |
| C32 cmsStsPortTrfRxErrors | 1.3.6.1.4.1.9.9.721.1.5.1.1.26 | Counter32 | read-only | This object indicates the number of received packets with errors on the port identified by the indices |
| C32 cmsStsPortTrfRxOther | 1.3.6.1.4.1.9.9.721.1.5.1.1.27 | Counter32 | read-only | This object indicates the number of received packets on the port identified by the indices and not counted on the others receive counters |
| C32 cmsStsPortTrfRxPcktsConsumed | 1.3.6.1.4.1.9.9.721.1.5.1.1.25 | Counter32 | read-only | This object indicates the number of received packets consumed on the port identified by the indices |
| C32 cmsStsPortTrfRxPcktsFlooded | 1.3.6.1.4.1.9.9.721.1.5.1.1.22 | Counter32 | read-only | This object indicates the number of received packets flooded on the port identified by the indices |
| C32 cmsStsPortTrfRxPcktsFwdToMembers | 1.3.6.1.4.1.9.9.721.1.5.1.1.23 | Counter32 | read-only | This object indicates the number of received packets forwarded to members on the port identified by the indices |
| C32 cmsStsPortTrfRxPcktsFwdToMrouters | 1.3.6.1.4.1.9.9.721.1.5.1.1.24 | Counter32 | read-only | This object indicates the number of received packets forwarded to MRouters on the port identified by the indices |
| C32 cmsStsPortTrfTxErrors | 1.3.6.1.4.1.9.9.721.1.5.1.1.28 | Counter32 | read-only | This object indicates the number of transmitted packets with errors on the port identified by the indices |
| C32 cmsStsPortTrfV2ReportGenerated | 1.3.6.1.4.1.9.9.721.1.5.1.1.12 | Counter32 | read-only | This object indicates the number of V2 reports generated on the port identified by the indices |
| C32 cmsStsPortTrfV2ReportReceived | 1.3.6.1.4.1.9.9.721.1.5.1.1.10 | Counter32 | read-only | This object indicates the number of V2 reports received on the port identified by the indices |
| C32 cmsStsPortTrfV2ReportReinjected | 1.3.6.1.4.1.9.9.721.1.5.1.1.11 | Counter32 | read-only | This object indicates the number of V2 reports re-injected on the port identified by the indices |
| C32 cmsStsPortTrfV3ReportGenerated | 1.3.6.1.4.1.9.9.721.1.5.1.1.15 | Counter32 | read-only | This object indicates the number of V3 reports generated on the port identified by the indices |
| C32 cmsStsPortTrfV3ReportReceived | 1.3.6.1.4.1.9.9.721.1.5.1.1.13 | Counter32 | read-only | This object indicates the number of V3 reports received on the port identified by the indices |
| C32 cmsStsPortTrfV3ReportReinjected | 1.3.6.1.4.1.9.9.721.1.5.1.1.14 | Counter32 | read-only | This object indicates the number of V3 reports re-injected on the port identified by the indices |
| C32 cmsSysIntQuerierRxGeneralQueriesEx | 1.3.6.1.4.1.9.9.721.1.4.1 | Counter32 | read-only | This object indicates the number of general queries received by the internal querier. |
| C32 cmsSysIntQuerierRxGeneralQueriesAsLoser | 1.3.6.1.4.1.9.9.721.1.4.6 | Counter32 | read-only | This object indicates the number of general queries received by the internal querier as loser. |
| C32 cmsSysIntQuerierRxGeneralQueriesAsNonQuerier | 1.3.6.1.4.1.9.9.721.1.4.4 | Counter32 | read-only | This object indicates the number of general queries received by the internal querier as non querier. |
| C32 cmsSysIntQuerierRxGeneralQueriesAsQuerier | 1.3.6.1.4.1.9.9.721.1.4.3 | Counter32 | read-only | This object indicates the number of general queries received by the internal querier as querier. |
| C32 cmsSysIntQuerierRxGeneralQueriesAsWinner | 1.3.6.1.4.1.9.9.721.1.4.5 | Counter32 | read-only | This object indicates the number of general queries received by the internal querier as winner. |
| C32 cmsSysIntQuerierRxGeneralQueriesWhenDisabled | 1.3.6.1.4.1.9.9.721.1.4.2 | Counter32 | read-only | This object indicates the number of general queries received when internal querier is disabled. |
| C32 cmsSysIntQuerierRxGlobalLeaves | 1.3.6.1.4.1.9.9.721.1.4.7 | Counter32 | read-only | This object indicates the number of global leaves received. |
| C32 cmsSysIntQuerierRxGlobalLeavesIgnored | 1.3.6.1.4.1.9.9.721.1.4.10 | Counter32 | read-only | This objects indicates the number of global leaves received and ignored. |
| C32 cmsSysIntQuerierRxGlobalLeavesWhenDisabled | 1.3.6.1.4.1.9.9.721.1.4.8 | Counter32 | read-only | This object indicates the number of global leaves received when internal querier is disabled. |
| C32 cmsSysIntQuerierRxGlobalLeavsAsNonQuerier | 1.3.6.1.4.1.9.9.721.1.4.9 | Counter32 | read-only | This objects indicates the number of global leaves received as non querier. |
| C32 cmsSysIntQuerierRxLocalQuerySolicitations | 1.3.6.1.4.1.9.9.721.1.4.13 | Counter32 | read-only | This object indicates the number of local query solicitations received. |
| C32 cmsSysIntQuerierRxPimDisabledNotifications | 1.3.6.1.4.1.9.9.721.1.4.12 | Counter32 | read-only | This object indicates the number of PIM disabled notification received. |
| C32 cmsSysIntQuerierRxPimEnabledNotifications | 1.3.6.1.4.1.9.9.721.1.4.11 | Counter32 | read-only | This object indicates the number of PIM enabled notification received. |
| C32 cmsSysIntQuerierTxGeneralQueries | 1.3.6.1.4.1.9.9.721.1.4.14 | Counter32 | read-only | This object indicates the number of general queries transmitted. |
| C32 cmsSysRxV3RepAllowNewSrc | 1.3.6.1.4.1.9.9.721.1.4.47 | Counter32 | read-only | This object indicates the number of V3 reports of type 'Allow New Source' received by the system. |
| C32 cmsSysRxV3RepBlockOldSrc | 1.3.6.1.4.1.9.9.721.1.4.48 | Counter32 | read-only | This object indicates the number of V3 reports of type 'block old source' received by the system. |
| C32 cmsSysRxV3RepChangeToExclude | 1.3.6.1.4.1.9.9.721.1.4.46 | Counter32 | read-only | This object indicates the number of V3 reports of type 'change to exclude' received by the system. |
| C32 cmsSysRxV3RepChangeToInclude | 1.3.6.1.4.1.9.9.721.1.4.44 | Counter32 | read-only | This object indicates the number of V3 reports of type 'change to include' received by the system. |
| C32 cmsSysRxV3RepIsExclude | 1.3.6.1.4.1.9.9.721.1.4.45 | Counter32 | read-only | This object indicates the number of V3 reports of type 'exclude' received by the system. |
| C32 cmsSysRxV3RepIsInclude | 1.3.6.1.4.1.9.9.721.1.4.43 | Counter32 | read-only | This object indicates the number of V3 reports of type 'include' received by the system. |
| cmsSystemInfo | 1.3.6.1.4.1.9.9.721.1.2 | |||
| cmsSystemStats | 1.3.6.1.4.1.9.9.721.1.4 | |||
| C32 cmsSysTrfGeneralQueriesGenerated | 1.3.6.1.4.1.9.9.721.1.4.17 | Counter32 | read-only | This object indicates the number of general queries generated. |
| C32 cmsSysTrfGeneralQueriesReceived | 1.3.6.1.4.1.9.9.721.1.4.15 | Counter32 | read-only | This object indicates the number of general queries received. |
| C32 cmsSysTrfGeneralQueriesReinjected | 1.3.6.1.4.1.9.9.721.1.4.16 | Counter32 | read-only | This object indicates the number of general querier re-injected. |
| C32 cmsSysTrfGlobalLeavesGenerated | 1.3.6.1.4.1.9.9.721.1.4.32 | Counter32 | read-only | This object indicates the number of global leaves generated. |
| C32 cmsSysTrfGlobalLeavesReceived | 1.3.6.1.4.1.9.9.721.1.4.30 | Counter32 | read-only | This object indicates the number of global leaves received. |
| C32 cmsSysTrfGlobalLeavesReinjected | 1.3.6.1.4.1.9.9.721.1.4.31 | Counter32 | read-only | This object indicates the number of global leaves re-injected. |
| C32 cmsSysTrfGrpSpecificQueriesGenerated | 1.3.6.1.4.1.9.9.721.1.4.20 | Counter32 | read-only | This object indicates the number of group specific queries generated. |
| C32 cmsSysTrfGrpSpecificQueriesReceived | 1.3.6.1.4.1.9.9.721.1.4.18 | Counter32 | read-only | This object indicates the number of group specific queries received. |
| U32 cmsSysTrfGrpSpecificQueriesReinjected | 1.3.6.1.4.1.9.9.721.1.4.19 | Unsigned32 | read-only | This object indicates the number of group specific queries re-injected. |
| C32 cmsSysTrfGSSpecificQueriesGenerated | 1.3.6.1.4.1.9.9.721.1.4.23 | Counter32 | read-only | This object indicates the number of group source specific queries generated. |
| C32 cmsSysTrfGSSpecificQueriesReceived | 1.3.6.1.4.1.9.9.721.1.4.21 | Counter32 | read-only | This object indicates the number of group source specific queries received. |
| C32 cmsSysTrfGSSpecificQueriesReinjected | 1.3.6.1.4.1.9.9.721.1.4.22 | Counter32 | read-only | This object indicates the number of group source specific queries re-injected. |
| U32 cmsSysTrfPIMHellosGenerated | 1.3.6.1.4.1.9.9.721.1.4.35 | Unsigned32 | read-only | This object indicates the number of PIM hellos generated. |
| C32 cmsSysTrfPIMHellosReceived | 1.3.6.1.4.1.9.9.721.1.4.33 | Counter32 | read-only | This object indicates the number of PIM hellos received. |
| C32 cmsSysTrfPIMHellosReinjected | 1.3.6.1.4.1.9.9.721.1.4.34 | Counter32 | read-only | This object indicates the number of PIM hellos re-injected. |
| C32 cmsSysTrfRxErrors | 1.3.6.1.4.1.9.9.721.1.4.40 | Counter32 | read-only | This object indicates the number of received packets with errors. |
| C32 cmsSysTrfRxOther | 1.3.6.1.4.1.9.9.721.1.4.41 | Counter32 | read-only | This object indicates the number of received packets not counted on the other rx counters on this table. |
| C32 cmsSysTrfRxPcktsConsumed | 1.3.6.1.4.1.9.9.721.1.4.39 | Counter32 | read-only | This object indicates the number of received packets consumed by the system. |
| C32 cmsSysTrfRxPcktsFlooded | 1.3.6.1.4.1.9.9.721.1.4.36 | Counter32 | read-only | This object indicates the number of received packets flooded on the system. |
| C32 cmsSysTrfRxPcktsFwdToMembers | 1.3.6.1.4.1.9.9.721.1.4.37 | Counter32 | read-only | This object indicates the number of received packets forwarded to the snooping members. |
| C32 cmsSysTrfRxPcktsFwdToMrouters | 1.3.6.1.4.1.9.9.721.1.4.38 | Counter32 | read-only | This object indicates the number of received packets forwarded to MRouters. |
| C32 cmsSysTrfTxErrors | 1.3.6.1.4.1.9.9.721.1.4.42 | Counter32 | read-only | This object indicates the number of transmitted packets with errors. |
| C32 cmsSysTrfV2ReportGenerated | 1.3.6.1.4.1.9.9.721.1.4.26 | Counter32 | read-only | This object indicates the number of V2 reports generated. |
| C32 cmsSysTrfV2ReportReceived | 1.3.6.1.4.1.9.9.721.1.4.24 | Counter32 | read-only | This object indicates the number of V2 reports received. |
| C32 cmsSysTrfV2ReportReinjected | 1.3.6.1.4.1.9.9.721.1.4.25 | Counter32 | read-only | This object indicates the number of V2 reports re-injected. |
| C32 cmsSysTrfV3ReportGenerated | 1.3.6.1.4.1.9.9.721.1.4.29 | Counter32 | read-only | This object indicates the number of V3 reports generated. |
| C32 cmsSysTrfV3ReportReceived | 1.3.6.1.4.1.9.9.721.1.4.27 | Counter32 | read-only | This object indicates the number of V3 reports received. |
| C32 cmsSysTrfV3ReportReinjected | 1.3.6.1.4.1.9.9.721.1.4.28 | Counter32 | read-only | This object indicates the number of V3 reports re-injected. |
RFC description
This MIB module defines objects that describe IGMP/MLD snooping for multicast group management and L2VPN bridge domain systems.
Start monitoring Cisco Layer 2/Layer 3 switch (MLD snooping) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.