CIE1000-ALARM-MIB

All MIBs › CIE1000-ALARM-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2016-02-08

Category: Alarm and Event Management, Cisco Devices

Description: Manages alarm thresholds and notification configuration for fault monitoring on Cisco IE1000 industrial Ethernet switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIE1000-ALARM-MIB?

CIE1000-ALARM-MIB is a Cisco private enterprise MIB for the IE1000 series industrial Ethernet switches, part of Cisco's ruggedized industrial networking product line. It exposes configuration objects for defining named alarm expressions and actions, along with a status table reporting whether each configured alarm is currently active or has been suppressed. The MIB is squarely aimed at monitoring hardware and system health: an operator defines threshold-based alarm rules and then polls their real-time status, effectively surfacing fault conditions the switch has detected rather than raw metrics. It relies on other CIE1000 environment/hardware MIBs to supply the underlying sensor and counter data referenced inside its alarm expressions. It is typically used in industrial/OT network monitoring where an NMS needs to know when a defined fault condition, not just a raw value, has fired. Engineers can download the CIE1000-ALARM-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIE1000-ALARM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IE1000 industrial Ethernet switch

Monitoring Examples

An administrator can walk cie1000AlarmConfigTable to see which alarm rules are defined (cie1000AlarmConfigAlarmName, cie1000AlarmConfigExpression, cie1000AlarmConfigAction) and then poll cie1000AlarmStatusTable's cie1000AlarmStatusSuppressed to see whether a given named alarm is currently active or has been silenced. A transition from suppressed to active on a rule tied to a power or link condition indicates the underlying condition it was written to detect has occurred. The cie1000AlarmConfigTableRowEditor objects support provisioning new alarm rules directly via SNMP SET.

What Can Be Monitored

configured alarm names and expressions
alarm action (e.g. log/trap)
alarm active/suppressed status
alarm rule provisioning via row editor

Imported Objects

From CIE1000-TC

CIE1000DisplayString
CIE1000RowEditorState

From CISCO-IE1000-MIB

cie1000SwitchMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cie1000AlarmMib	1.3.6.1.4.1.9.9.832.1.136			This is a private mib for alarms
cie1000AlarmMibObjects	1.3.6.1.4.1.9.9.832.1.136.1
cie1000AlarmConfig	1.3.6.1.4.1.9.9.832.1.136.1.2
cie1000AlarmConfigTable	1.3.6.1.4.1.9.9.832.1.136.1.2.1		not-accessible	The table is the list of configured alarms. The index is the name of the alarm
cie1000AlarmConfigEntry	1.3.6.1.4.1.9.9.832.1.136.1.2.1.1		not-accessible	An index is a dotted name e.g. alarm.port.status
STR cie1000AlarmConfigAlarmName	1.3.6.1.4.1.9.9.832.1.136.1.2.1.1.1	CIE1000DisplayString	accessible-for-notify	The name of the alarm
STR cie1000AlarmConfigExpression	1.3.6.1.4.1.9.9.832.1.136.1.2.1.1.2	CIE1000DisplayString	read-write	The expression defining the alarm.
CIE cie1000AlarmConfigAction	1.3.6.1.4.1.9.9.832.1.136.1.2.1.1.100	CIE1000RowEditorState	read-write	Action
cie1000AlarmConfigTableRowEditor	1.3.6.1.4.1.9.9.832.1.136.1.2.2
STR cie1000AlarmConfigTableRowEditorAlarmName	1.3.6.1.4.1.9.9.832.1.136.1.2.2.1	CIE1000DisplayString	read-write	The name of the alarm
STR cie1000AlarmConfigTableRowEditorExpression	1.3.6.1.4.1.9.9.832.1.136.1.2.2.2	CIE1000DisplayString	read-write	The expression defining the alarm.
CIE cie1000AlarmConfigTableRowEditorAction	1.3.6.1.4.1.9.9.832.1.136.1.2.2.100	CIE1000RowEditorState	read-write	Action
cie1000AlarmStatus	1.3.6.1.4.1.9.9.832.1.136.1.3
cie1000AlarmStatusTable	1.3.6.1.4.1.9.9.832.1.136.1.3.1		not-accessible	The table is the list of alarm nodes. The index is the name of the alarm node
cie1000AlarmStatusEntry	1.3.6.1.4.1.9.9.832.1.136.1.3.1.1		not-accessible	An index is a dotted name e.g. alarm.port.status
STR cie1000AlarmStatusAlarmName	1.3.6.1.4.1.9.9.832.1.136.1.3.1.1.1	CIE1000DisplayString	accessible-for-notify	The name of the alarm
T/F cie1000AlarmStatusSuppressed	1.3.6.1.4.1.9.9.832.1.136.1.3.1.1.2	TruthValue	read-only	Indicates whether the alarm subtree is suppressed. When a subtree is suppressed, the status does not contribute to the state of the superior alarm tree.
T/F cie1000AlarmStatusActive	1.3.6.1.4.1.9.9.832.1.136.1.3.1.1.3	TruthValue	read-only	Indicates whether the alarm is active
T/F cie1000AlarmStatusExposedActive	1.3.6.1.4.1.9.9.832.1.136.1.3.1.1.4	TruthValue	read-only	The exposed alarm status.
cie1000AlarmControl	1.3.6.1.4.1.9.9.832.1.136.1.4
cie1000AlarmControlTable	1.3.6.1.4.1.9.9.832.1.136.1.4.1		not-accessible	The table is the list of alarm nodes. The index is the name of the alarm node
cie1000AlarmControlEntry	1.3.6.1.4.1.9.9.832.1.136.1.4.1.1		not-accessible	An index is a dotted name e.g. alarm.port.status
STR cie1000AlarmControlAlarmName	1.3.6.1.4.1.9.9.832.1.136.1.4.1.1.1	CIE1000DisplayString	accessible-for-notify	The name of the alarm
T/F cie1000AlarmControlSuppress	1.3.6.1.4.1.9.9.832.1.136.1.4.1.1.2	TruthValue	read-write	Indicates whether to suppress the alarm subtree. When a subtree is suppressed, the status does not contribute to the state of the superior alarm tree.
cie1000AlarmTrap	1.3.6.1.4.1.9.9.832.1.136.1.6
NTF cie1000AlarmTrapStatusAdd	1.3.6.1.4.1.9.9.832.1.136.1.6.1			This trap signals that a row has been added. The index(es) and value(s) of the row is included in the trap.
NTF cie1000AlarmTrapStatusMod	1.3.6.1.4.1.9.9.832.1.136.1.6.2			This trap signals that one or more of the objects included in the trap has been updated.
NTF cie1000AlarmTrapStatusDel	1.3.6.1.4.1.9.9.832.1.136.1.6.3			This trap signals that a row has been deleted. The index(es) of the row is included in the trap.
cie1000AlarmMibConformance	1.3.6.1.4.1.9.9.832.1.136.2
cie1000AlarmMibCompliances	1.3.6.1.4.1.9.9.832.1.136.2.1
cie1000AlarmMibCompliance	1.3.6.1.4.1.9.9.832.1.136.2.1.1			The compliance statement for the implementation.
cie1000AlarmMibGroups	1.3.6.1.4.1.9.9.832.1.136.2.2
cie1000AlarmConfigTableInfoGroup	1.3.6.1.4.1.9.9.832.1.136.2.2.1			A collection of objects.
cie1000AlarmConfigTableRowEditorInfoGroup	1.3.6.1.4.1.9.9.832.1.136.2.2.2			A collection of objects.
cie1000AlarmStatusInfoGroup	1.3.6.1.4.1.9.9.832.1.136.2.2.3			A collection of objects.
cie1000AlarmControlTableInfoGroup	1.3.6.1.4.1.9.9.832.1.136.2.2.4			A collection of objects.
cie1000AlarmTrapStatusAddInfoGroup	1.3.6.1.4.1.9.9.832.1.136.2.2.5			Information group containing a trap.
cie1000AlarmTrapStatusModInfoGroup	1.3.6.1.4.1.9.9.832.1.136.2.2.6			Information group containing a trap.
cie1000AlarmTrapStatusDelInfoGroup	1.3.6.1.4.1.9.9.832.1.136.2.2.7			Information group containing a trap.

RFC description

Vitesse CIE1000 Ethernet switch vendor-private MIB for alarm generation and notification management.

Start monitoring Cisco IE1000 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIE1000-ALARM-MIB

What Is CIE1000-ALARM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description