CISCO-ITP-XUA-MIB

All MIBs › CISCO-ITP-XUA-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2008-06-09

Category: Cisco Devices, SNA and Legacy Protocols

Description: Manages ITP SIGTRAN xUA (M2UA/M3UA/SUA) protocol associations, ASPs, and routing contexts.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-ITP-XUA-MIB?

The CISCO-ITP-XUA-MIB manages SIGTRAN protocol adaptation layers, M3UA (MTP3 User Adaptation) and SUA (SCCP User Adaptation), on Cisco IP Transfer Point (ITP) nodes that carry SS7 signaling over IP networks. It exposes configuration and status data for xUA instances, signaling gateway management, Application Server Processes (ASPs), and Application Servers, including port/protocol settings and administrative shutdown state. Network operators use it to monitor the software/protocol-stack health of SS7-over-IP associations, tracking active ASP counts, instance configuration change timestamps, and row status to detect failed or administratively down associations that would disrupt SS7 message transfer. It depends on ITU-T Q.700/Q.701 SS7 standards and IETF SIGTRAN RFCs for M3UA/SUA as its underlying protocol basis. It is deployed in telecom/carrier networks using Cisco ITP as a signaling gateway bridging TDM SS7 to IP-based SIGTRAN transport. Engineers can download the CISCO-ITP-XUA-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-ITP-XUA-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IP Transfer Point (ITP) SS7-over-IP signaling gateway

Monitoring Examples

cItpXuaInstTable/cItpXuaInstTableEntry expose per-instance objects like cItpXuaInstPort, cItpXuaInstProtocol, and cItpXuaInstShut, letting an admin confirm an M3UA instance is running on the expected port and not administratively shut down. cItpXuaInstActiveASPs shows how many Application Server Processes are currently active for that instance, a drop indicating ASP failover or link loss. cItpXuaInstConfigLastChanged and cItpXuaAspConfigLastChanged timestamps help correlate configuration changes with subsequent state-change notifications.

What Can Be Monitored

active ASP count per instance
xUA instance port and protocol
instance administrative shutdown state
configuration change timestamps
state-change notifications

Imported Objects

From CISCO-ITP-SP-MIB

cItpSpCLLICode

OBJECT-TYPE

From CISCO-ITP-TC-MIB

CItpTcNetworkName
CItpTcPointCode
CItpTcQos
CItpTcServiceIndicator
CItpTcSubSystemNumber
CItpTcXuaName

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using cItpXuaAspPktsFromAsp OID:

Select a Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cItpXuaAspPktsFromAsp into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of MSUs received from this ASP. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in MSUs), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoItpXuaAsGroup	1.3.6.1.4.1.9.9.253.2.2.8			M3UA/SUA AS objects.
ciscoItpXuaAsGroupRev2	1.3.6.1.4.1.9.9.253.2.2.18			M3UA/SUA AS objects.
ciscoItpXuaAsGroupRev3	1.3.6.1.4.1.9.9.253.2.2.19			M3UA/SUA AS objects.
ciscoItpXuaAspAsGroup	1.3.6.1.4.1.9.9.253.2.2.9			M3UA/SUA ASP-AS objects.
ciscoItpXuaAspAsGroupRev3	1.3.6.1.4.1.9.9.253.2.2.20			M3UA/SUA ASP-AS objects.
NTF ciscoItpXuaAspAssocStateChange	1.3.6.1.4.1.9.9.253.0.8			This notification is generated when the association used to connect to the ASP changes state.
NTF ciscoItpXuaAspCongChange	1.3.6.1.4.1.9.9.253.0.4			The notification generated when an ASP changes to a new congestion level. The value of cItpXuaAspCongLevel indicates the new congetion level for the ASP.
NTF ciscoItpXuaAspDestAddrStateChange	1.3.6.1.4.1.9.9.253.0.7			The notification is generated when a destination IP address used by ASP changes state.
ciscoItpXuaAspGroup	1.3.6.1.4.1.9.9.253.2.2.5			M3UA/SUA ASP objects.
ciscoItpXuaAspGroupRev1	1.3.6.1.4.1.9.9.253.2.2.13			M3UA/SUA ASP objects.
ciscoItpXuaAspGroupRev2	1.3.6.1.4.1.9.9.253.2.2.17			M3UA/SUA ASP objects.
ciscoItpXuaAspRemoteIpGroup	1.3.6.1.4.1.9.9.253.2.2.6			Remote IP address for M3UA/SUA ASP objects.
ciscoItpXuaAspRemoteIpSup1Group	1.3.6.1.4.1.9.9.253.2.3.4			M3UA/SUA ASP supplemental objects to ciscoItpXuaAspRemoteIpGroup.
NTF ciscoItpXuaAspStateChange	1.3.6.1.4.1.9.9.253.0.1			The notification generated when an ASP changes to a new state. The value of cItpXuaAspAsState indicates the new state for the ASP that is serving the AS specified by cItpXuaAsDisplayName.
ciscoItpXuaAspStatsGroup	1.3.6.1.4.1.9.9.253.2.2.7			M3UA/SUA ASP Statistics objects.
ciscoItpXuaAspStatsSup1Group	1.3.6.1.4.1.9.9.253.2.3.8			M3UA/SUA ASP supplemental objects to ciscoItpXuaAspStatsGroup.
ciscoItpXuaAspSup1Group	1.3.6.1.4.1.9.9.253.2.3.3			M3UA/SUA ASP supplemental objects to ciscoItpXuaAspGroupRev2.
ciscoItpXuaAsrAsGroup	1.3.6.1.4.1.9.9.253.2.2.22			ASRoute-AS objects.
ciscoItpXuaAsrGroup	1.3.6.1.4.1.9.9.253.2.2.21			ASRoute objects.
NTF ciscoItpXuaAsStateChange	1.3.6.1.4.1.9.9.253.0.3			The notification generated when an AS changes to a new state. The value of cItpXuaAsState indicates the new state for the AS.
ciscoItpXuaAsSup1Group	1.3.6.1.4.1.9.9.253.2.3.7			M3UA/SUA AS supplemental objects to ciscoItpXuaAsGroupRev3.
ciscoItpXuaConformance	1.3.6.1.4.1.9.9.253.2
ciscoItpXuaInstGroup	1.3.6.1.4.1.9.9.253.2.2.2			M3UA/SUA Instance objects.
ciscoItpXuaInstGroupRev2	1.3.6.1.4.1.9.9.253.2.2.16			M3UA/SUA Instance objects.
ciscoItpXuaInstGroupSup1Group	1.3.6.1.4.1.9.9.253.2.3.6			M3UA/SUA Instance supplemental objects to ciscoItpXuaInstGroupRev2.
ciscoItpXuaInstLocalIpGroup	1.3.6.1.4.1.9.9.253.2.2.3			The Local IP address for M3UA/SUA Instance objects.
ciscoItpXuaMIB	1.3.6.1.4.1.9.9.253			The MIB for MTP3 User Adaptation (M3UA) and SCCP User Adaptation (SUA) for Cisco's IP Transfer Point (ITP) implementation. The Cisco IP Transfer Point (ITP) is a hardware and software solution that transports SS7 traffic using IP. Each ITP node provides function similar to SS7 signaling point. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signaling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signaling System No. 7. The relevent information about M3UA and SUA is available at the IETF: http://www.ietf.org/html.charters/sigtran-charter.html This MIB consists of the following tables: M3UA/SUA (XUA) Instance Table M3UA/SUA (XUA) Instance Local IP Table Signaling Gateway Mate Table Signaling Gateway Mate Remote IP Table Application Server Process (ASP) Table Application Server Process (ASP) Remote IP Table Application Server Process (ASP) Statistics Table Application Server (AS) Table ASP-AS Table ASRoute Table ASRouteAs Table Abbreviations: AS - Application Server ASP - Application Server Process ASPAC - ASP ACtive message ASPDN - ASP Down message ASPIA - ASP InActive message ASPUP - ASP UP message CIC - Circuit Identifier Code for ISUP CLLI - Common Language Location Codes DPC - Destination Point Code DAUD - Destination AUDit DAVA - Destination AVAilable DUNA - Destination UNAvailable DUPU - Destination User Part Unavailable ERR - Error message GTT - Global Title Translation HLR - Home Location Registry ISDN - Integrated Services Digital Network ISUP - ISDN User Part M3UA - MTP3 User Adaptation MGC - Media Gateway Controller used in VoIP MSU - Message Signal Unit MTP - Message Transport Protocol MTP2 - Layer 2 of Message Transport Protocol MTP3 - Layer 3 of Message Transport Protocol NMS - Network Management System OPC - Originating Point Code PC - Point Code QOS - Quality Of Service SCCP - Signaling Connection Control Part SCP - Service Control Point (SS7) SCON - Signaling link CONgestion SCON0 - Signaling link CONgestion level 0 (no congestion) SCON1 - Signaling link CONgestion level 1 SCON2 - Signaling link CONgestion level 2 SCON3 - Signaling link CONgestion level 3 SG - Signaling Gateway SGM - Signaling Gateway Mate SGMP - Signaling Gateway Mated Protocol SCTP - Stream Transmission Protocol(RFC 2960) SI - Signaling Indicator SIO - Service Indicator Octet (SS7) SNMM - Signaling Network Management Message SSN - Subsystem Number for SCCP SUA - SCCP User Adaptation TUP - Telephone User Part TT - Title Translation VIP - Versatile Interface Processor XUA - M3UA, SUA or SGMP Brief description: The Signaling Gateway (SG) on the ITP receives the SS7 Message Signal Units(MSUs), converts them to M3UA/SUA messages and routes them to the ASPs over SCTP/IP association. The routing of the message depends on the routing information present in the message and the routing keys configured as part of the ASes. There can be one or more instances of M3UA/SUA at the SG. These instances are identified by a unique port number. Each of these instances can have one or more IP addresses which form 'local' end of the multi-homing SCTP association. The Application Server Process (ASP) is a remote entity which has its own port number and one or more IP addresses to form the 'remote' end of the multi-homing SCTP association. Examples of ASPs are MGCs, IP SCPs or IP HLRs. Application Server (AS), as described in section '1.2 Terminology' of M3UA/SUA draft, is a logical entity serving a specific Routing Key. An example of an AS is a virtual switch element handling all call processing for a unique range of PSTN trunks, identified by an SS7 SIO/DPC/OPC/CIC_range. Another example is a virtual database element, handling all HLR transactions for a particular SS7 DPC/OPC/SCCP_SSN combination. The AS contains a set of one or more unique ASPs of which one or more is normally actively processing traffic. Note that there is a 1:1 relationship between an AS and a Routing Key. An ASP can serve one or more ASes and an AS can have one or more ASPs. An ASP while serving an AS can be active, inactive or down. When one or more ASPs for an AS is active, the AS is active. When all ASPs for an AS are inactive, the AS is inactive. The state of the AS is maintained in one object, whereas, the state of an ASP is maintained for each AS that it serves in ASP-AS table. The SGs are always deployed in mated pairs to provide high availability and redundancy. The SG mates exchange the state of ASes. When an AS is down on one SG, it can route the SS7 message to its mate which can properly route that SS7 message.
ciscoItpXuaMIBCompliance	1.3.6.1.4.1.9.9.253.2.1.1			The compliance statement for entities which implement the Cisco ITP XUA MIB
ciscoItpXuaMIBComplianceRev1	1.3.6.1.4.1.9.9.253.2.1.2			The compliance statement for entities which implement the Cisco ITP XUA MIB
ciscoItpXuaMIBComplianceRev2	1.3.6.1.4.1.9.9.253.2.1.3			The compliance statement for entities which implement the Cisco ITP XUA MIB
ciscoItpXuaMIBComplianceRev3	1.3.6.1.4.1.9.9.253.2.1.4			The compliance statement for entities which implement the Cisco ITP XUA MIB
ciscoItpXuaMIBComplianceRev4	1.3.6.1.4.1.9.9.253.2.1.5			The compliance statement for entities which implement the Cisco ITP XUA MIB
ciscoItpXuaMIBComplianceRev5	1.3.6.1.4.1.9.9.253.2.1.6			The compliance statement for entities which implement the Cisco ITP XUA MIB
ciscoItpXuaMIBComplianceRev6	1.3.6.1.4.1.9.9.253.2.1.7			The compliance statement for entities which implement the Cisco ITP XUA MIB
ciscoItpXuaMIBCompliances	1.3.6.1.4.1.9.9.253.2.1
ciscoItpXuaMIBGroups	1.3.6.1.4.1.9.9.253.2.2
ciscoItpXuaMIBNotifs	1.3.6.1.4.1.9.9.253.0
ciscoItpXuaMIBObjects	1.3.6.1.4.1.9.9.253.1
ciscoItpXuaNotifGroup	1.3.6.1.4.1.9.9.253.2.3.5			M3UA/SUA state change notifications.
ciscoItpXuaNotifGroupRev1	1.3.6.1.4.1.9.9.253.2.2.14			M3UA/SUA notifications.
ciscoItpXuaNotificationsGroup	1.3.6.1.4.1.9.9.253.2.2.11			M3UA/SUA notifications.
ciscoItpXuaNotifObjectsGroup	1.3.6.1.4.1.9.9.253.2.2.10			M3UA/SUA notification objects.
ciscoItpXuaScalarsGroup	1.3.6.1.4.1.9.9.253.2.2.1			M3UA/SUA main objects.
NTF ciscoItpXuaSgmAssocStateChange	1.3.6.1.4.1.9.9.253.0.9			This notification is generated when the association used to connect to the SG Mate changes state.
NTF ciscoItpXuaSgmCongChange	1.3.6.1.4.1.9.9.253.0.5			The notification generated when an SG Mate changes to a new congestion level. The value of cItpXuaSgmCongLevel indicates the new congetion level for the SG Mate.
NTF ciscoItpXuaSgmDestAddrStateChange	1.3.6.1.4.1.9.9.253.0.6			The notification is generated when a destination IP address used by SG Mate changes state.
ciscoItpXuaSgmGroup	1.3.6.1.4.1.9.9.253.2.2.4			SG Mate objects.
ciscoItpXuaSgmGroupRev1	1.3.6.1.4.1.9.9.253.2.2.12			SG Mate objects.
ciscoItpXuaSgmGroupSup1Group	1.3.6.1.4.1.9.9.253.2.3.1			SG Mate Supplemental objects to ciscoItpXuaSgmGroupRev1.
ciscoItpXuaSgmRemoteIpGroup	1.3.6.1.4.1.9.9.253.2.2.15			Remote IP address for the Signaling Gateway Mate.
ciscoItpXuaSgmRemoteIpSup1Group	1.3.6.1.4.1.9.9.253.2.3.2			SG Mate supplemental object to ciscoItpXuaSgmRemoteIpGroup.
NTF ciscoItpXuaSgmStateChange	1.3.6.1.4.1.9.9.253.0.2			The notification generated when an SG Mate changes to a new state. The value of cItpXuaSgmState indicates the new state for the SG Mate.
ciscoItpXuaSup1Groups	1.3.6.1.4.1.9.9.253.2.3
cItpXuaAs	1.3.6.1.4.1.9.9.253.1.8
TIK cItpXuaAsActiveTS	1.3.6.1.4.1.9.9.253.1.8.1.1.6	TimeTicks	read-only	The value of system uptime at the time when this AS became active. A value of zero (0) indicates that the AS is not active.
C64 cItpXuaAsBytesFromASPsOfAs	1.3.6.1.4.1.9.9.253.1.8.1.1.31	Counter64	read-only	The number of octets received from all ASPs that are serving this AS.
C64 cItpXuaAsBytesFromMtp3	1.3.6.1.4.1.9.9.253.1.8.1.1.28	Counter64	read-only	The number of octets received from MTP3.
C64 cItpXuaAsBytesToASPsOfAs	1.3.6.1.4.1.9.9.253.1.8.1.1.29	Counter64	read-only	The number of octets sent to all ASPs that are serving this AS.
C64 cItpXuaAsBytesToMtp3	1.3.6.1.4.1.9.9.253.1.8.1.1.30	Counter64	read-only	The number of octets sent to MTP3.
TIK cItpXuaAsConfigLastChanged	1.3.6.1.4.1.9.9.253.1.1.4	TimeTicks	read-only	The value of system timestamp at the time of the last creation or deletion of an entry in the cItpXuaAsTable. This value can be used to prevent unnecessary walks of the XUA AS Table.
U32 cItpXuaAsCongLevel	1.3.6.1.4.1.9.9.253.1.8.1.1.25	Unsigned32	read-only	The current congestion level for the AS. A zero value indicates that the AS is not congested. The higher numbers indicate the higher levels of congestion. The congestion level is determined from the congestion levels of the ASPs that belong to this AS.
CIT cItpXuaAsDisplayName	1.3.6.1.4.1.9.9.253.1.10.3	CItpTcXuaName	accessible-for-notify	This object identifies the AS name associated with the ciscoItpXuaAspStateChange and ciscoItpXuaAsStateChange notifications.
CIT cItpXuaAsName	1.3.6.1.4.1.9.9.253.1.8.1.1.1	CItpTcXuaName	not-accessible	The Application Server name. This name has only local significance.
U32 cItpXuaAsNetworkAppear	1.3.6.1.4.1.9.9.253.1.8.1.1.24	Unsigned32	read-create	The Network Appearance is a local reference shared by SG and AS that together with a point code uniquely identifies an SS7 node by indicating the specific SS7 network it belongs to. It can be used to distinguish between signaling traffic associated with different networks being sent between the SG and the ASP over a common SCTP association. An example scenario is where an SG appears as an element in multiple separate national SS7 networks and the same point code value may be reused in different networks.
CIT cItpXuaAsNetworkName	1.3.6.1.4.1.9.9.253.1.8.1.1.23	CItpTcNetworkName	read-only	The network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enabled the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space.
cItpXuaAsp	1.3.6.1.4.1.9.9.253.1.5
U32 cItpXuaAspAddrNum	1.3.6.1.4.1.9.9.253.1.6.1.1.1	Unsigned32	not-accessible	This object specifies the index for the ASP's remote IP address. The ASP Name in cItpXuaAspName specifies the ASP.
cItpXuaAspAs	1.3.6.1.4.1.9.9.253.1.9
TIK cItpXuaAspAsActiveTS	1.3.6.1.4.1.9.9.253.1.9.1.1.3	TimeTicks	read-only	The value of system timestamp at the time when this ASP became active with respect to the specified AS. If the ASP is not active with respect to the specified AS this object will contain a value of zero.
CIT cItpXuaAspAsName	1.3.6.1.4.1.9.9.253.1.9.1.1.1	CItpTcXuaName	not-accessible	The Application Server name.
C32 cItpXuaAspASPACACKsSent	1.3.6.1.4.1.9.9.253.1.7.1.1.10	Counter32	read-only	The number of ASP Active ACK messages sent.
C32 cItpXuaAspASPACsRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.9	Counter32	read-only	The number of ASP Active messages received.
C32 cItpXuaAspASPDNACKsSent	1.3.6.1.4.1.9.9.253.1.7.1.1.8	Counter32	read-only	The number of ASP Down ACK messages sent.
C32 cItpXuaAspASPDNsRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.7	Counter32	read-only	The number of ASP Down messages received.
C32 cItpXuaAspASPIAACKsSent	1.3.6.1.4.1.9.9.253.1.7.1.1.12	Counter32	read-only	The number of ASP Inactive ACK messages sent.
C32 cItpXuaAspASPIAsRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.11	Counter32	read-only	The number of ASP Inactive messages received.
C32 cItpXuaAspASPUPACKsSent	1.3.6.1.4.1.9.9.253.1.7.1.1.6	Counter32	read-only	The number of ASP Up ACK messages sent.
C32 cItpXuaAspASPUPsRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.5	Counter32	read-only	The number of ASP Up messages received.
ROW cItpXuaAspAsRowStatus	1.3.6.1.4.1.9.9.253.1.9.1.1.4	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cItpXuaAspAsTable following the RowStatus textual convention.
STR cItpXuaAspAssocFailedReason	1.3.6.1.4.1.9.9.253.1.5.1.1.15	SnmpAdminString	read-only	The ASP SCTP Association failure reason.
U32 cItpXuaAspAssocId	1.3.6.1.4.1.9.9.253.1.5.1.1.2	Unsigned32	read-only	Association Identifiers can be greater than 65,535. This object has been replaced by cItpXuaAspAssocIdU32.
U32 cItpXuaAspAssocIdU32	1.3.6.1.4.1.9.9.253.1.5.1.1.13	Unsigned32	read-only	This is the association identifier defined in the Stream Control Transmission Protocol(SCTP) MIB. A value greater than zero indicates a valid association and zero indicates no association.
CIT cItpXuaAspAssocState	1.3.6.1.4.1.9.9.253.1.5.1.1.14	CItpXuaAssocState	read-only	The state of the ASP SCTP Association.
CIT cItpXuaAspAsState	1.3.6.1.4.1.9.9.253.1.9.1.1.2	CItpXuaAspState	read-only	The state of the ASP that serves this AS.
cItpXuaAspAsTable	1.3.6.1.4.1.9.9.253.1.9.1		not-accessible	A table of M3UA/SUA ASP-AS entries. An ASP can serve one or more ASes. For each AS that it serves, the ASP maintains the state information. Entries are added to this table via cItpXuaAspAsRowStatus in accordance with the RowStatus convention.
cItpXuaAspAsTableEntry	1.3.6.1.4.1.9.9.253.1.9.1.1		not-accessible	A list of M3UA/SUA ASP-AS attributes.
U32 cItpXuaAspAsWeight	1.3.6.1.4.1.9.9.253.1.9.1.1.5	Unsigned32	read-create	When cItpXuaAsTrafMode specifies 'loadRndRobind', this object specifies the weight which is used in Weighted Round Robin algorithm. The default is 1. When the weight is 0, this particular ASP is selected only when there are no other active ASPs with a non-zero weight.
T/F cItpXuaAspBlocked	1.3.6.1.4.1.9.9.253.1.5.1.1.7	TruthValue	read-create	When an ASP is blocked, it cannot receive normal data traffic, but it can send or receive control messages. The ASP Blocked truth value. 'true' Indicates that the ASP has been blocked by an administrative action. 'false' Indicates that the ASP is not blocked.
C64 cItpXuaAspBytesFromAsp	1.3.6.1.4.1.9.9.253.1.7.1.1.32	Counter64	read-only	The number of octets received from this ASP.
C64 cItpXuaAspBytesFromMtp3	1.3.6.1.4.1.9.9.253.1.7.1.1.34	Counter64	read-only	The number of octets received from MTP3.
C64 cItpXuaAspBytesToAsp	1.3.6.1.4.1.9.9.253.1.7.1.1.33	Counter64	read-only	The number of octets sent to this ASP.
C64 cItpXuaAspBytesToMtp3	1.3.6.1.4.1.9.9.253.1.7.1.1.35	Counter64	read-only	The number of octets sent to MTP3.
TIK cItpXuaAspConfigLastChanged	1.3.6.1.4.1.9.9.253.1.1.3	TimeTicks	read-only	The value of system timestamp at the time of the last creation or deletion of an entry in the cItpXuaAspTable. This value can be used to prevent unnecessary walks of the XUA ASP Table.
U32 cItpXuaAspCongLevel	1.3.6.1.4.1.9.9.253.1.5.1.1.12	Unsigned32	read-only	The current congestion level for this ASP. A zero value indicates that the ASP is not congested. The higher numbers indicate the higher levels of congestion. The congestion level is determined from the SCTP congestion indication and the SCON level received from the ASP.
C32 cItpXuaAspDAUDsRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.22	Counter32	read-only	The number of Destination State Audit messages received.
C32 cItpXuaAspDAUDsSent	1.3.6.1.4.1.9.9.253.1.7.1.1.23	Counter32	read-only	The number of Destination State Audit messages sent.
C32 cItpXuaAspDAVAsRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.18	Counter32	read-only	The number of Destination Available messages received.
C32 cItpXuaAspDAVAsSent	1.3.6.1.4.1.9.9.253.1.7.1.1.19	Counter32	read-only	The number of Destination Available messages sent.
CIT cItpXuaAspDisplayName	1.3.6.1.4.1.9.9.253.1.10.2	CItpTcXuaName	accessible-for-notify	This object identifies the ASP name associated with the ciscoItpXuaAspStateChange notification.
C32 cItpXuaAspDUNAsRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.16	Counter32	read-only	The number of Destination Unavailable messages received.
C32 cItpXuaAspDUNAsSent	1.3.6.1.4.1.9.9.253.1.7.1.1.17	Counter32	read-only	The number of Destination Unavailable messages sent.
C32 cItpXuaAspDUPUsRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.20	Counter32	read-only	The number of Destination User Part Unavailable messages received.
C32 cItpXuaAspDUPUsSent	1.3.6.1.4.1.9.9.253.1.7.1.1.21	Counter32	read-only	The number of Destination User Part Unavailable messages sent.
C32 cItpXuaAspErrorsRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.13	Counter32	read-only	The number of ASP Error messages received.
C32 cItpXuaAspErrorsSent	1.3.6.1.4.1.9.9.253.1.7.1.1.14	Counter32	read-only	The number of ASP Error messages sent.
U32 cItpXuaAspIdentifier	1.3.6.1.4.1.9.9.253.1.5.1.1.10	Unsigned32	read-only	A unique value received by the Signaling Gateway from the ASP as part of ASP UP message.
C32 cItpXuaAsPktsFromASPsOfAs	1.3.6.1.4.1.9.9.253.1.8.1.1.27	Counter32	read-only	The number of MSUs received from all ASPs that are serving this AS.
C32 cItpXuaAsPktsFromMtp3	1.3.6.1.4.1.9.9.253.1.8.1.1.20	Counter32	read-only	The number of MSUs received from MTP3.
C32 cItpXuaAsPktsToASPsOfAs	1.3.6.1.4.1.9.9.253.1.8.1.1.21	Counter32	read-only	The number of MSUs sent to all ASPs that are serving this AS.
C32 cItpXuaAsPktsToMtp3	1.3.6.1.4.1.9.9.253.1.8.1.1.26	Counter32	read-only	The number of MSUs sent to MTP3.
INE cItpXuaAspLocalPort	1.3.6.1.4.1.9.9.253.1.5.1.1.3	InetPortNumber	read-create	This object contains the local SCTP port number used to create the association supporting this link. This local port determines the XUA instance that this ASP is connected with. The value zero is not allowed.
CIT cItpXuaAspName	1.3.6.1.4.1.9.9.253.1.5.1.1.1	CItpTcXuaName	not-accessible	The name of the Applicaton Server Process.
C32 cItpXuaAspNotifysSent	1.3.6.1.4.1.9.9.253.1.7.1.1.15	Counter32	read-only	The number of ASP Notify messages sent.
C32 cItpXuaAspPktsFromAspEx	1.3.6.1.4.1.9.9.253.1.7.1.1.1	Counter32	read-only	The number of MSUs received from this ASP.
C32 cItpXuaAspPktsFromMtp3	1.3.6.1.4.1.9.9.253.1.7.1.1.3	Counter32	read-only	The number of MSUs received from MTP3.
C32 cItpXuaAspPktsToAsp	1.3.6.1.4.1.9.9.253.1.7.1.1.2	Counter32	read-only	The number of MSUs sent to this ASP.
C32 cItpXuaAspPktsToMtp3	1.3.6.1.4.1.9.9.253.1.7.1.1.4	Counter32	read-only	The number of MSUs sent to MTP3.
CIT cItpXuaAspProtocol	1.3.6.1.4.1.9.9.253.1.5.1.1.5	CItpXuaProtocol	read-create	The protocol used by this ASP. Only M3UA or SUA are allowed.
CIT cItpXuaAspQosClass	1.3.6.1.4.1.9.9.253.1.5.1.1.9	CItpTcQos	read-create	This object specifies the QOS class for the ASP. The value of 255 is not applicable. A value of zero (0) indicates that QOS class is not defined. When QOS class is defined, it overrides the QOS class specified by cItpXuaAsQosClass.
cItpXuaAspRemoteIp	1.3.6.1.4.1.9.9.253.1.6
IP cItpXuaAspRemoteIpAddr	1.3.6.1.4.1.9.9.253.1.6.1.1.3	InetAddress	read-create	This object contains the remote IP address used to create the association supporting this ASP.
CIT cItpXuaAspRemoteIpDestState	1.3.6.1.4.1.9.9.253.1.6.1.1.5	CItpXuaRemoteIpDestState	read-only	This object contains the remote IP state used to create the association supporting this ASP.
ROW cItpXuaAspRemoteIpRowStatus	1.3.6.1.4.1.9.9.253.1.6.1.1.4	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cItpXuaAspRemoteIpTable following the RowStatus textual convention.
cItpXuaAspRemoteIpTable	1.3.6.1.4.1.9.9.253.1.6.1		not-accessible	A table of Remote IP addresses for the Application Server Processes (ASP). For a given ASP, there can be multiple remote IP addresses which are used for the multi-homing feature of the SCTP associations. Entries are added to this table via cItpXuaAspRemoteIpRowStatus in accordance with the RowStatus convention.
cItpXuaAspRemoteIpTableEntry	1.3.6.1.4.1.9.9.253.1.6.1.1		not-accessible	A list of Remote IP addresses for the Application Server Processes.
IPt cItpXuaAspRemoteIpType	1.3.6.1.4.1.9.9.253.1.6.1.1.2	InetAddressType	read-create	This object contains the type of the remote IP address used to create the association supporting this ASP.
INE cItpXuaAspRemotePort	1.3.6.1.4.1.9.9.253.1.5.1.1.4	InetPortNumber	read-create	This object contains the configured remote SCTP port number used to create the association supporting this link. The value zero means any non-zero remote port is acceptable. The actual remote port can be determined from SCTP association in cItpXuaAspAssocIdU32.
CIT cItpXuaAsProtocol	1.3.6.1.4.1.9.9.253.1.8.1.1.2	CItpXuaProtocol	read-create	The protocol used by this AS.
ROW cItpXuaAspRowStatus	1.3.6.1.4.1.9.9.253.1.5.1.1.11	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cItpXuaAspTable following the RowStatus textual convention.
C32 cItpXuaAspSCON0sRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.24	Counter32	read-only	The number of Signaling Congestion messages with congestion level 0 (or no congestion) received.
C32 cItpXuaAspSCON0sSent	1.3.6.1.4.1.9.9.253.1.7.1.1.28	Counter32	read-only	The number of Signaling Congestion messages with congestion level 0 (or no congestion) sent.
C32 cItpXuaAspSCON1sRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.25	Counter32	read-only	The number of Signaling Congestion messages with congestion level 1 received.
C32 cItpXuaAspSCON1sSent	1.3.6.1.4.1.9.9.253.1.7.1.1.29	Counter32	read-only	The number of Signaling Congestion messages with congestion level 1 sent.
C32 cItpXuaAspSCON2sRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.26	Counter32	read-only	The number of Signaling Congestion messages with congestion level 2 received.
C32 cItpXuaAspSCON2sSent	1.3.6.1.4.1.9.9.253.1.7.1.1.30	Counter32	read-only	The number of Signaling Congestion messages with congestion level 2 sent.
C32 cItpXuaAspSCON3sRcvd	1.3.6.1.4.1.9.9.253.1.7.1.1.27	Counter32	read-only	The number of Signaling Congestion messages with congestion level 3 received.
C32 cItpXuaAspSCON3sSent	1.3.6.1.4.1.9.9.253.1.7.1.1.31	Counter32	read-only	The number of Signaling Congestion messages with congestion level 3 sent.
T/F cItpXuaAspShut	1.3.6.1.4.1.9.9.253.1.5.1.1.6	TruthValue	read-create	The ASP Shut truth value. 'true' Indicates that the ASP has been shutdown by an administrative action. 'false' Indicates that the ASP is not shutdown.
cItpXuaAspStats	1.3.6.1.4.1.9.9.253.1.7
cItpXuaAspStatsTable	1.3.6.1.4.1.9.9.253.1.7.1		not-accessible	A table of Application Server Processes (ASP) statistics.
cItpXuaAspStatsTableEntry	1.3.6.1.4.1.9.9.253.1.7.1.1		not-accessible	A list of ASP statistics.
cItpXuaAspTable	1.3.6.1.4.1.9.9.253.1.5.1		not-accessible	A table of Application Server Processes (ASP). Entries are added to this table via cItpXuaAspRowStatus in accordance with the RowStatus convention.
cItpXuaAspTableEntry	1.3.6.1.4.1.9.9.253.1.5.1.1		not-accessible	A list of Application Server Processes.
CIT cItpXuaAsQosClass	1.3.6.1.4.1.9.9.253.1.8.1.1.7	CItpTcQos	read-create	The AS specifies the QOS class for all its ASPs. The value of 255 is not applicable. A value of zero (0) indicates that QOS class is not defined. This value can be overridden by cItpXuaAspQosClass.
C32 cItpXuaAsrAsDavaRcvd	1.3.6.1.4.1.9.9.253.1.13.1.1.9	Counter32	read-only	The number of Destination Available (DAVA) messages received by this AS in the ASRoute.
C32 cItpXuaAsrAsDrstRcvd	1.3.6.1.4.1.9.9.253.1.13.1.1.10	Counter32	read-only	The number of Destination Restricted (DRST) messages received by this AS in the ASRoute.
C32 cItpXuaAsrAsDunaRcvd	1.3.6.1.4.1.9.9.253.1.13.1.1.8	Counter32	read-only	The number of Destination Unavailable (DUNA) messages received by this AS in the ASRoute.
CIT cItpXuaAsrAsName	1.3.6.1.4.1.9.9.253.1.13.1.1.1	CItpTcXuaName	not-accessible	The Application Server name.
C64 cItpXuaAsrAsOutbByteRcvd	1.3.6.1.4.1.9.9.253.1.13.1.1.5	Counter64	read-only	The number of outbound data byte received from MTP3 for this AS.
C64 cItpXuaAsrAsOutbByteSent	1.3.6.1.4.1.9.9.253.1.13.1.1.7	Counter64	read-only	The number of outbound data byte sent to this AS in the ASRoute.
C32 cItpXuaAsrAsOutbPktsRcvd	1.3.6.1.4.1.9.9.253.1.13.1.1.4	Counter32	read-only	The number of outbound MSUs received from MTP3 for this AS.
C32 cItpXuaAsrAsOutbPktsSent	1.3.6.1.4.1.9.9.253.1.13.1.1.6	Counter32	read-only	The number of outbound MSUs sent to this AS in the ASroute.
U32 cItpXuaAsrAsPriority	1.3.6.1.4.1.9.9.253.1.13.1.1.2	Unsigned32	read-only	The priority of this AS in the ASRoute.
ROW cItpXuaAsrAsRowStatus	1.3.6.1.4.1.9.9.253.1.13.1.1.11	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cItpXuaASRouteAsTable following the RowStatus textual convention.
CIT cItpXuaAsrAsState	1.3.6.1.4.1.9.9.253.1.13.1.1.3	CItpXuaRouteState	read-only	The AS state in the ASRoute.
NUM cItpXuaAsrDpc	1.3.6.1.4.1.9.9.253.1.12.1.1.5	CItpTcPointCode	read-create	The Destination Point Code (DPC) in the routing key for the ASRoute.
T/F cItpXuaAsRerouting	1.3.6.1.4.1.9.9.253.1.8.1.1.9	TruthValue	read-only	The AS Rerouting truth value. 'true' Indicates that this SG is rerouting the traffic to the mated SG. 'false' Indicates that this SG is not rerouting the traffic to the mated SG.
U32 cItpXuaAsRkCicMax	1.3.6.1.4.1.9.9.253.1.8.1.1.19	Unsigned32	read-create	The Routing key maximum CIC value. The 'cic' bit in the cItpXuaAsRkParameters object is used to indicate whether this object's value has any current relevance.
U32 cItpXuaAsRkCicMin	1.3.6.1.4.1.9.9.253.1.8.1.1.18	Unsigned32	read-create	The Routing key minimum CIC value. The 'cic' bit in the cItpXuaAsRkParameters object is used to indicate whether this object's value has any current relevance.
NUM cItpXuaAsRkDpc	1.3.6.1.4.1.9.9.253.1.8.1.1.12	CItpTcPointCode	read-create	The Destination Point Code (DPC) in the routing key for the AS. The 'dpc' bit in the cItpXuaAsRkParameters object is used to indicate whether this object's value has any current relevance.
T/F cItpXuaAsRkGtt	1.3.6.1.4.1.9.9.253.1.8.1.1.17	TruthValue	read-create	The Routing key Global Title Translation (GTT) truth value. 'true' Indicates that the GTT is enabled. 'false' Indicates that the GTT is not enabled. The 'gtt' bit in the cItpXuaAsRkParameters object is used to indicate whether this object's value has any current relevance.
NUM cItpXuaAsRkOpc	1.3.6.1.4.1.9.9.253.1.8.1.1.13	CItpTcPointCode	read-create	The Origin Point Code (OPC) in the routing key for the AS. The 'opc' bit in the cItpXuaAsRkParameters object is used to indicate whether this object's value has any current relevance.
U32 cItpXuaAsRkOpcMask	1.3.6.1.4.1.9.9.253.1.8.1.1.14	Unsigned32	read-create	The Origin Point Code (OPC) mask in the routing key for the AS. The 'opcMask' bit in the cItpXuaAsRkParameters object is used to indicate whether this object's value has any current relevance.
BIT cItpXuaAsRkParameters	1.3.6.1.4.1.9.9.253.1.8.1.1.11	Bits	read-create	The cItpXuaAsRkParameters object indicates which Routing Key parameters are valid for this AS. 'dpc' : The cItpXuaAsRkDpc is the relevant column. 'opc' : cItpXuaAsRkOpc and cItpXuaAsRkOpcMask are the relevant columns. 'opcMask' : Indicates that a mask is to be applied when the opc is specified in the routing key. If the mask is not specified then the mask is assumed to be all zeros. 'si' : The cItpXuaAsRkSi is the relevant column. 'ssn' : Indicates that a SSN is to be checked as part of the routing key. 'gtt' : The cItpXuaAsRkGtt is the relevant column. It indicates that routing key for this AS can be the result of Global Title Translation. 'cic' : The cItpXuaAsRkCicMin and cItpXuaAsRkCicMax are the relevant columns. The following combination is allowed for all si's: gtt dpc dpc + opc dpc + opc + opcMask When si equals 3 (SCCP), the following is allowed: dpc + si dpc + si + opc dpc + si + ssn dpc + si + ssn + opc When si equals 4 (TUP) or 5 (ISUP), the following is allowed: dpc + si dpc + si + opc dpc + si + cic dpc + si + cic + opc
CIT cItpXuaAsRkSi	1.3.6.1.4.1.9.9.253.1.8.1.1.15	CItpTcServiceIndicator	read-create	The Service Indicator in the routing key for the AS. The 'si' bit in the cItpXuaAsRkParameters object is used to indicate whether this object's value has any current relevance.
CIT cItpXuaAsRkSsn	1.3.6.1.4.1.9.9.253.1.8.1.1.16	CItpTcSubSystemNumber	read-create	The SubSystem Number (SSN) in routing key for the AS. The 'ssn' bit in the cItpXuaAsRkParameters object is used to indicate whether this object's value has any current relevance.
CIT cItpXuaAsrName	1.3.6.1.4.1.9.9.253.1.12.1.1.1	CItpTcXuaName	not-accessible	The ASRoute name. This name has only local significance.
CIT cItpXuaAsrNetwork	1.3.6.1.4.1.9.9.253.1.12.1.1.2	CItpTcNetworkName	read-only	The network name is used to indicate the network in which this signalling point is participating. One or more instances of signalling points can exist in the same physical device. This identifier will be used to correlate instances of signalling points by network. When multiple instance support is not enabled the network name will default to the null string. An octet string specified by an administrator that must be in human-readable form. The names must conform to the allowed characters that can be specified via Command Line Interface(CLI). The names cannot contain control character and should not contain leading or trailing white space.
C64 cItpXuaAsrOutbByteRcvd	1.3.6.1.4.1.9.9.253.1.12.1.1.10	Counter64	read-only	The number of outbound data byte received from MTP3.
C64 cItpXuaAsrOutbByteSent	1.3.6.1.4.1.9.9.253.1.12.1.1.12	Counter64	read-only	The number of outbound data byte sent to this ASRoute.
C32 cItpXuaAsrOutbPktsRcvd	1.3.6.1.4.1.9.9.253.1.12.1.1.9	Counter32	read-only	The number of outbound MSUs received from MTP3.
C32 cItpXuaAsrOutbPktsSent	1.3.6.1.4.1.9.9.253.1.12.1.1.11	Counter32	read-only	The number of outbound MSUs sent to this ASroute.
cItpXuaASRoute	1.3.6.1.4.1.9.9.253.1.12
cItpXuaASRouteAs	1.3.6.1.4.1.9.9.253.1.13
cItpXuaASRouteAsTable	1.3.6.1.4.1.9.9.253.1.13.1		not-accessible	A table of routes for remote point-codes using ASs defined on this ITP node. Entries are added to this table via cItpXuaASRouteRowStatus in accordance with the RowStatus convention.
cItpXuaASRouteAsTableEntry	1.3.6.1.4.1.9.9.253.1.13.1.1		not-accessible	A list of ASs for ASRoute.
cItpXuaASRouteTable	1.3.6.1.4.1.9.9.253.1.12.1		not-accessible	A table of routes for remote point-codes using ASs defined on this ITP node. Entries are added to this table via cItpXuaASRouteRowStatus in accordance with the RowStatus convention.
cItpXuaASRouteTableEntry	1.3.6.1.4.1.9.9.253.1.12.1.1		not-accessible	A list of routes for remote point-codes using ASs.
U32 cItpXuaAsRoutingContext	1.3.6.1.4.1.9.9.253.1.8.1.1.10	Unsigned32	read-only	An ASP may be configured to serve more than one AS. In this case, the Routing Context parameter is exchanged between the SG and the ASP, identifying the relevant AS. The Routing Context uniquely identifies the range of traffic associated with a particular AS, which the ASP is configured to receive. There is a 1:1 relationship between a Routing Context value and a Routing Key within an AS.
ROW cItpXuaAsRowStatus	1.3.6.1.4.1.9.9.253.1.8.1.1.22	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cItpXuaAsTable following the RowStatus textual convention.
CIT cItpXuaAsrProtocol	1.3.6.1.4.1.9.9.253.1.12.1.1.3	CItpXuaProtocol	read-create	The protocol used by this ASRoute.
U32 cItpXuaAsrRoutingContext	1.3.6.1.4.1.9.9.253.1.12.1.1.4	Unsigned32	read-only	An AS may be configured to serve more than one ASRoute. In this case, the Routing Context parameter is exchanged between the SG and the ASP, identifying the relevant AS. The Routing Context uniquely identifies the range of traffic associated with a particular AS, which the ASP is configured to receive.
ROW cItpXuaAsrRowStatus	1.3.6.1.4.1.9.9.253.1.12.1.1.16	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cItpXuaASRouteTable following the RowStatus textual convention.
C32 cItpXuaAsrSgmateDavaRcvd	1.3.6.1.4.1.9.9.253.1.12.1.1.14	Counter32	read-only	The number of Destination Available (DAVA) messages received by the SG Mate.
C32 cItpXuaAsrSgmateDrstRcvd	1.3.6.1.4.1.9.9.253.1.12.1.1.15	Counter32	read-only	The number of Destination Restricted (DRST) messages received by the SG Mate.
C32 cItpXuaAsrSgmateDunaRcvd	1.3.6.1.4.1.9.9.253.1.12.1.1.13	Counter32	read-only	The number of Destination Unavailable (DUNA) messages received by the SG Mate.
U32 cItpXuaAsrSgmatePriority	1.3.6.1.4.1.9.9.253.1.12.1.1.8	Unsigned32	read-only	The ASRoute priority on the mated Signalling Gateway.
CIT cItpXuaAsrSgmateState	1.3.6.1.4.1.9.9.253.1.12.1.1.7	CItpXuaRouteState	read-only	The ASRoute state on the mated Signalling Gateway. This object provides the status of an ASRoute as provided by the Signalling Gateway Mated Protocol. This object can be used by the NMS to assist in problem determination. Each Signaling Gateway Mated pair should have same definitions. This allows the NMS examine the status ASRoute from the perspective of each Signalling Gateway. If the definitions are different on the mated pairs the NMS will be unable to determine the relationships between the ASRoutes and mated pairs.
T/F cItpXuaAsrShut	1.3.6.1.4.1.9.9.253.1.12.1.1.6	TruthValue	read-create	The ASRoute Shut truth value. 'true' Indicates that the ASRoute has been shutdown by an administrative action. 'false' Indicates that the ASRoute is not shutdown.
T/F cItpXuaAsShut	1.3.6.1.4.1.9.9.253.1.8.1.1.3	TruthValue	read-create	The AS Shut truth value. 'true' Indicates that the AS has been shutdown by an administrative action. 'false' Indicates that the AS is not shutdown.
CIT cItpXuaAsState	1.3.6.1.4.1.9.9.253.1.8.1.1.4	CItpXuaAsState	read-only	The Application Server (AS) state.
CIT cItpXuaAsStateOnSgMate	1.3.6.1.4.1.9.9.253.1.8.1.1.5	CItpXuaAsState	read-only	The Application Server (AS) state on the mated Signaling Gateway. This object provides the status of an Application Service as provided by the Signaling Gateway Mated Protocol. This object can be used by the NMS to assist in problem determination. Each Signaling Gateway Mated pair should have same definitions. This allows the NMS examine the status Application Service from perspective of each Signalling Gateway. If the definitions are different on the mated pairs the NMS will be unable to determine the relationships between the ASes and mated pairs.
cItpXuaAsTable	1.3.6.1.4.1.9.9.253.1.8.1		not-accessible	A table of M3UA/SUA Application Server (AS) entries. Entries are added to this table via cItpXuaAsRowStatus in accordance with the RowStatus convention.
cItpXuaAsTableEntry	1.3.6.1.4.1.9.9.253.1.8.1.1		not-accessible	A list of M3UA/SUA AS attributes.
CIT cItpXuaAsTrafMode	1.3.6.1.4.1.9.9.253.1.8.1.1.8	CItpXuaTrafMode	read-create	The traffic mode for the MSUs received for this AS.
cItpXuaInst	1.3.6.1.4.1.9.9.253.1.2
G32 cItpXuaInstActiveASPs	1.3.6.1.4.1.9.9.253.1.2.1.1.4	Gauge32	read-only	The number of ASPs connected to this instance.
U32 cItpXuaInstAddrNum	1.3.6.1.4.1.9.9.253.1.3.1.1.1	Unsigned32	not-accessible	This object specifies the index for one of local IP addresses for the XUA instance which is identified by cItpXuaInstPort.
TIK cItpXuaInstConfigLastChanged	1.3.6.1.4.1.9.9.253.1.1.1	TimeTicks	read-only	The value of system timestamp at the time of the last creation or deletion of an entry in the cItpXuaInstTable. This value can be used to prevent unnecessary walks of the XUA Instance Table.
cItpXuaInstLocalIp	1.3.6.1.4.1.9.9.253.1.3
IP cItpXuaInstLocalIpAddr	1.3.6.1.4.1.9.9.253.1.3.1.1.3	InetAddress	read-create	This object contains the local IP address used to create the association for ASPs connecting to the XUA instance specified by the cItpXuaInstPort.
ROW cItpXuaInstLocalIpRowStatus	1.3.6.1.4.1.9.9.253.1.3.1.1.4	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cItpXuaInstLocalIpTable following the RowStatus textual convention.
cItpXuaInstLocalIpTable	1.3.6.1.4.1.9.9.253.1.3.1		not-accessible	A table of Local IP addresses for the XUA instances. For a given instance, there can be multiple local IP addresses which are used for the multi-homing feature of the SCTP associations. This table lists out the configured local IP addresses. Entries are added to this table via cItpXuaInstLocalIpRowStatus in accordance with the RowStatus convention.
cItpXuaInstLocalIpTableEntry	1.3.6.1.4.1.9.9.253.1.3.1.1		not-accessible	A list of attributes of the Local IP addresses for the XUA instances.
IPt cItpXuaInstLocalIpType	1.3.6.1.4.1.9.9.253.1.3.1.1.2	InetAddressType	read-create	This object contains the type of the local IP address used to create the association for ASPs connecting to the XUA instance specified by the cItpXuaInstPort.
T/F cItpXuaInstOffload	1.3.6.1.4.1.9.9.253.1.2.1.1.6	TruthValue	read-create	The XUA Instance Offload truth value. 'true' Indicates that the XUA Instance has been offloaded to a VIP in the slot specified by cItpXuaInstOffloadSlot object. 'false' Indicates that the XUA Instance is not offloaded.
U32 cItpXuaInstOffloadSlot	1.3.6.1.4.1.9.9.253.1.2.1.1.7	Unsigned32	read-create	When the XUA instance is offloaded to a VIP (i.e. cItpXuaInstOffload is true), this object specifies the slot number for the VIP. Otherwise, this object is not defined.
U32 cItpXuaInstOffProcNumber	1.3.6.1.4.1.9.9.253.1.2.1.1.8	Unsigned32	read-only	When the XUA instance is offloaded to a SAMI (i.e. cItpXuaInstOffload is true and cItpXuaInstOffloadSlot points to SAMI line card), this object specifies the processor number on SAMI where XUA instance is offloaded. When the XUA instance is offloaded to a Flexwan, this object specifies the bay number where XUA instance is offloaded. Otherwise, when cItpXuaInstOffload is false, this object is not defined.
INE cItpXuaInstPort	1.3.6.1.4.1.9.9.253.1.2.1.1.1	InetPortNumber	not-accessible	The local SCTP port for the XUA instance. The value zero is not allowed.
CIT cItpXuaInstProtocol	1.3.6.1.4.1.9.9.253.1.2.1.1.2	CItpXuaProtocol	read-create	The protocol of the XUA instance.
ROW cItpXuaInstRowStatus	1.3.6.1.4.1.9.9.253.1.2.1.1.5	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cItpXuaInstTable following the RowStatus textual convention.
T/F cItpXuaInstShut	1.3.6.1.4.1.9.9.253.1.2.1.1.3	TruthValue	read-create	The XUA Instance Shut truth value. 'true' Indicates that the XUA Instance has been shutdown by an administrative action. 'false' Indicates that the XUA Instance is not shutdown.
cItpXuaInstTable	1.3.6.1.4.1.9.9.253.1.2.1		not-accessible	A table of M3UA/SUA/SGMP instances. There can be multiple M3UA or SUA instances on a given Signaling Gateway. Each instance is uniquely identified by the port number. The local port number of the ASP (cItpXuaAspLocalPort) matches with the port number of the instance (cItpXuaInstPort). Also for a given instance, there can be multiple local IP addresses which are used for the multi-homing feature of the SCTP associations. There can only be one instance of SGMP. M3UA or SUA instances can be offloaded to a VIP on a 7500 platform. When an instance is offloaded, all ASPs that belong to that instance are also offloaded. Entries are added to this table via cItpXuaInstRowStatus in accordance with the RowStatus convention.
cItpXuaInstTableEntry	1.3.6.1.4.1.9.9.253.1.2.1.1		not-accessible	A list of XUA instance attributes.
cItpXuaMIBNotifObjects	1.3.6.1.4.1.9.9.253.1.10
cItpXuaScalars	1.3.6.1.4.1.9.9.253.1.1
cItpXuaSgm	1.3.6.1.4.1.9.9.253.1.4
TIK cItpXuaSgmActiveTS	1.3.6.1.4.1.9.9.253.1.4.1.1.7	TimeTicks	read-only	The value of system timestamp at the time when this SG Mate became active. A value of zero (0) indicates that the SG Mate is not active.
U32 cItpXuaSgmAddrNum	1.3.6.1.4.1.9.9.253.1.11.1.1.1	Unsigned32	not-accessible	This object specifies the index for the SGM's remote IP address. The SGM Name in cItpXuaSgmName specifies the SGM.
STR cItpXuaSgmAssocFailedReason	1.3.6.1.4.1.9.9.253.1.4.1.1.15	SnmpAdminString	read-only	The SG Mate SCTP Association failure reason.
U32 cItpXuaSgmAssocId	1.3.6.1.4.1.9.9.253.1.4.1.1.2	Unsigned32	read-only	This is the association identifier defined in the Stream Control Transmission Protocol(SCTP) MIB. A value greater than zero indicates a valid association and zero indicates no association.
CIT cItpXuaSgmAssocState	1.3.6.1.4.1.9.9.253.1.4.1.1.14	CItpXuaAssocState	read-only	The state of the SG Mate SCTP Association.
TIK cItpXuaSgmConfigLastChanged	1.3.6.1.4.1.9.9.253.1.1.2	TimeTicks	read-only	The value of system timestamp at the time of the last creation or deletion of an entry in the cItpXuaSgmTable. This value can be used to prevent unnecessary walks of the XUA SG Mate Table.
U32 cItpXuaSgmCongLevel	1.3.6.1.4.1.9.9.253.1.4.1.1.13	Unsigned32	read-only	The current congestion level for the SG Mate. A zero value indicates that the SG Mate is not congested. The higher numbers indicate the higher levels of congestion. The congestion level is determined from the SCTP congestion indication and the SCON level received from the SG Mate.
CIT cItpXuaSgmDisplayName	1.3.6.1.4.1.9.9.253.1.10.1	CItpTcXuaName	accessible-for-notify	This object identifies the SG Mate name associated with the ciscoItpXuaSgmStateChange notification.
INE cItpXuaSgmLocalPort	1.3.6.1.4.1.9.9.253.1.4.1.1.3	InetPortNumber	read-create	This object contains the local SCTP port number used to create the association supporting this link. This local port determines the XUA instance that this SG Mate is connected with. The value zero is not allowed.
CIT cItpXuaSgmName	1.3.6.1.4.1.9.9.253.1.4.1.1.1	CItpTcXuaName	not-accessible	The name of the SG Mate.
T/F cItpXuaSgmPassive	1.3.6.1.4.1.9.9.253.1.4.1.1.10	TruthValue	read-create	The SG Mate Passive truth value. 'true' Indicates that the SG Mate is passive, i.e. it waits for the SG Mate to initiate the SCTP association. 'false' Indicates that the SG Mate is not passive, i.e., it initiates the SCTP association with its SG Mate.
CIT cItpXuaSgmQosClass	1.3.6.1.4.1.9.9.253.1.4.1.1.8	CItpTcQos	read-create	This object specifies the QOS class for the SG Mate. The value of 255 is not applicable. A value of zero (0) indicates that QOS class is not defined.
cItpXuaSgmRemoteIp	1.3.6.1.4.1.9.9.253.1.11
IP cItpXuaSgmRemoteIpAddr	1.3.6.1.4.1.9.9.253.1.11.1.1.3	InetAddress	read-create	This object contains the remote IP address used to create the association supporting this SGM.
CIT cItpXuaSgmRemoteIpDestState	1.3.6.1.4.1.9.9.253.1.11.1.1.5	CItpXuaRemoteIpDestState	read-only	This object contains the remote IP interface state that is used to create the association supporting this Signalling Gateway Mate.
ROW cItpXuaSgmRemoteIpRowStatus	1.3.6.1.4.1.9.9.253.1.11.1.1.4	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cItpXuaSgmRemoteIpTable following the RowStatus textual convention.
cItpXuaSgmRemoteIpTable	1.3.6.1.4.1.9.9.253.1.11.1		not-accessible	A table of Remote IP addresses for the Signaling Gateway Mate (SGM). For a given SGM, there can be multiple remote IP addresses which are used for the multi-homing feature of the SCTP associations. Entries are added to this table via cItpXuaSgmRemoteIpRowStatus in accordance with the RowStatus convention.
cItpXuaSgmRemoteIpTableEntry	1.3.6.1.4.1.9.9.253.1.11.1.1		not-accessible	A list of Remote IP addresses for the Signaling Gateway Mate.
IPt cItpXuaSgmRemoteIpType	1.3.6.1.4.1.9.9.253.1.11.1.1.2	InetAddressType	read-create	This object contains the type of the remote IP address used to create the association supporting this SGM.
INE cItpXuaSgmRemotePort	1.3.6.1.4.1.9.9.253.1.4.1.1.4	InetPortNumber	read-create	This object contains the remote SCTP port number used to create the association supporting this link. The value zero is not allowed.
ROW cItpXuaSgmRowStatus	1.3.6.1.4.1.9.9.253.1.4.1.1.12	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cItpXuaSgmTable following the RowStatus textual convention.
T/F cItpXuaSgmShut	1.3.6.1.4.1.9.9.253.1.4.1.1.6	TruthValue	read-create	The SG Mate shut truth value. 'true' Indicates that the SG Mate has been shutdown by an administrative action. 'false' Indicates that the SG Mate is not shutdown.
CIT cItpXuaSgmState	1.3.6.1.4.1.9.9.253.1.4.1.1.11	CItpXuaAspState	read-only	The state of the SG Mate. Only active and inactive states are applicable.
cItpXuaSgmTable	1.3.6.1.4.1.9.9.253.1.4.1		not-accessible	A table of SG Mate attributes. Entries are added to this table via cItpXuaSgmRowStatus in accordance with the RowStatus convention.
cItpXuaSgmTableEntry	1.3.6.1.4.1.9.9.253.1.4.1.1		not-accessible	A list of SG Mate attributes.
T/F cItpXuaStateChangeNotifEnabled	1.3.6.1.4.1.9.9.253.1.1.5	TruthValue	read-write	The State notification truth value. 'true' Indicates that the notification generation is enabled for ASP state changes, AS state changes, SG Mate state changes, ASP Congestion Level change and SG Mate Congestion Level change. 'false' Indicates that the notification generation is disabled for ASP state change, AS state, SG Mate state change, ASP Congestion Level change and SG Mate Congestion Level change.

RFC description

Cisco MIB for managing SIGTRAN XUA (SCTP User Adaptation) protocol in IP Transfer Point (ITP) voice switching equipment.

Start monitoring Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-ITP-XUA-MIB