CISCO-DMN-DSG-ROUTING-MIB

All MIBs › CISCO-DMN-DSG-ROUTING-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2012-05-14

Category: Cisco Devices, Satellite

Description: Manages IP routing table configuration and static route entries for the Cisco DMN D9800 satellite gateway.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-DMN-DSG-ROUTING-MIB?

CISCO-DMN-DSG-ROUTING-MIB is a Cisco Systems, Inc. proprietary MIB (part of the Cisco DSG — DOCSIS Set-top Gateway — MIB family) configuring multicast, static, and unicast routes. Its multicast-route table (index, IPv4 address, row status), static-route table (index, address/mask/gateway, per-output-port enable flags, row status), and unicast-routes table (index, port ID, address/mask/gateway, MTU, TTL, gateway-or-host flag) let an administrator confirm route provisioning on a Cisco DSG headend platform. As a configuration MIB it is deployed on Cisco Digital Media Network (DSG) headend platforms. Engineers can download the CISCO-DMN-DSG-ROUTING-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-DMN-DSG-ROUTING-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Digital Media Network (DSG) headend platforms

Monitoring Examples

An administrator checks staticRouteTable to confirm a static route's gateway and enabled output ports on a Cisco DSG headend platform.

What Can Be Monitored

multicast/static/unicast route configuration

Imported Objects

From CISCO-DMN-DSG-ROOT-MIB

ciscoDSGUtilities

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoDSGRouting	1.3.6.1.4.1.1429.2.2.5.40			Cisco Routing MIB.
multicastRouteTable	1.3.6.1.4.1.1429.2.2.5.40.1		not-accessible	Multicast Route Table.
multicastRouteEntry	1.3.6.1.4.1.1429.2.2.5.40.1.1		not-accessible	Entry for Multicast Route table.
I32 multicastRouteIndex	1.3.6.1.4.1.1429.2.2.5.40.1.1.1	Integer32	read-only	Multicast Route Index.
IP multicastRouteV4IPAddr	1.3.6.1.4.1.1429.2.2.5.40.1.1.2	IpAddress	read-write	Destination IP Address.
ROW multicastRouteRowStatus	1.3.6.1.4.1.1429.2.2.5.40.1.1.3	RowStatus	read-write	To be used for creating and deleting rows in this table.
staticRouteTable	1.3.6.1.4.1.1429.2.2.5.40.2		not-accessible	Static Route Table.
staticRouteEntry	1.3.6.1.4.1.1429.2.2.5.40.2.1		not-accessible	Entry for Static Route table.
I32 staticRouteIndex	1.3.6.1.4.1.1429.2.2.5.40.2.1.1	Integer32	read-only	Static Route Index.
IP staticRouteV4IPAddr	1.3.6.1.4.1.1429.2.2.5.40.2.1.2	IpAddress	read-write	Destination IP Address.
I32 staticRouteV4Mask	1.3.6.1.4.1.1429.2.2.5.40.2.1.3	Integer32	read-write	Destination Network Mask
IP staticRouteV4Gateway	1.3.6.1.4.1.1429.2.2.5.40.2.1.4	IpAddress	read-write	Gateway IP Address.
INT staticRoutePort1Enable	1.3.6.1.4.1.1429.2.2.5.40.2.1.5	INTEGER	read-write	Applicable for Port 1.
INT staticRoutePort2Enable	1.3.6.1.4.1.1429.2.2.5.40.2.1.6	INTEGER	read-write	Applicable for Port 2.
INT staticRoutePort3Enable	1.3.6.1.4.1.1429.2.2.5.40.2.1.7	INTEGER	read-write	Applicable for Port 3.
ROW staticRouteRowStatus	1.3.6.1.4.1.1429.2.2.5.40.2.1.8	RowStatus	read-write	To be used for creating and deleting rows in this table.
unicastRoutesTable	1.3.6.1.4.1.1429.2.2.5.40.3		not-accessible	Unicast Route Table.
unicastRoutesEntry	1.3.6.1.4.1.1429.2.2.5.40.3.1		not-accessible	Entry for Unicast Route table.
I32 unicastRoutesIndex	1.3.6.1.4.1.1429.2.2.5.40.3.1.1	Integer32	read-only	Unicast Route Index.
I32 unicastRoutesPortID	1.3.6.1.4.1.1429.2.2.5.40.3.1.2	Integer32	read-only	Port ID.
IP unicastRoutesV4IPAddr	1.3.6.1.4.1.1429.2.2.5.40.3.1.3	IpAddress	read-only	Destination IP Address.
I32 unicastRoutesV4Mask	1.3.6.1.4.1.1429.2.2.5.40.3.1.4	Integer32	read-only	Destination IP Address.
IP unicastRoutesV4Gateway	1.3.6.1.4.1.1429.2.2.5.40.3.1.5	IpAddress	read-only	Destination IP Gateway.
C32 unicastRoutesMTU	1.3.6.1.4.1.1429.2.2.5.40.3.1.6	Counter32	read-only	MTU.
C32 unicastRoutesTTL	1.3.6.1.4.1.1429.2.2.5.40.3.1.7	Counter32	read-only	TTL (ms).
INT unicastRoutesGWOrHost	1.3.6.1.4.1.1429.2.2.5.40.3.1.8	INTEGER	read-only	Gateway or Host.
INT unicastRoutesType	1.3.6.1.4.1.1429.2.2.5.40.3.1.9	INTEGER	read-only	Route Type.

RFC description

Manages multicast and unicast routing configuration for Cisco Digital Service Gateway Ethernet networks.

Start monitoring Cisco DMN D9800 digital satellite gateway with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-DMN-DSG-ROUTING-MIB

What Is CISCO-DMN-DSG-ROUTING-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description