CISCO-DMN-DSG-FAULT-MIB

All MIBs › CISCO-DMN-DSG-FAULT-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2010-08-30

Category: Alarm and Event Management, Cisco Devices, Satellite

Description: Monitors active faults, alarm history, and fault severity on the Cisco DMN D9800 digital satellite gateway.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-DMN-DSG-FAULT-MIB?

CISCO-DMN-DSG-FAULT-MIB, the DSG Fault Information MIB, belongs to Cisco's Digital Media Network Digital Satellite Gateway product family and centralizes fault and alarm reporting for D9800-series satellite receiver/gateway devices. It exposes summary counts of active alarms and warnings, a detailed active-fault list table, and controls for clearing alarms, warnings, or historical fault records. This MIB is squarely a fault/health-monitoring module: faultSummaryNumActiveAlarms and faultSummaryNumActiveWarnings give an at-a-glance device health indicator, while awFaultActiveListTable provides per-fault detail including priority, name, type, and the time each fault was set, effectively serving as the device's hardware/software fault log. It is a self-contained Cisco-specific MIB with no notable dependency on external standard MIBs. It is used in satellite headend operations centers to give NOC staff real-time visibility into gateway hardware and processing faults across a fleet of receivers. Engineers can download the CISCO-DMN-DSG-FAULT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-DMN-DSG-FAULT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco D9800 series Digital Satellite Gateway/receivers (Digital Media Network product family)

Monitoring Examples

A NOC operator would poll faultSummaryNumActiveAlarms and faultSummaryNumActiveWarnings for a quick health check, then drill into awFaultActiveListTable (via awFaultActiveListEntry) to read awFaultActiveListPriority, awFaultActiveListName, and awFaultActiveListSetDateTime for each outstanding fault. A rising faultSummaryNumActiveAlarms count combined with a high-priority entry in awFaultActiveListTable would point to a specific hardware or transcoding subsystem failure needing escalation. After remediation, faultSummaryClearAlarms or faultSummaryClearHistory would be used to reset the counters and log.

What Can Be Monitored

active alarm count
active warning count
fault priority
fault name/type
fault set time
alarm/warning history

Imported Objects

From CISCO-DMN-DSG-ROOT-MIB

ciscoDSGUtilities

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoDSGFault	1.3.6.1.4.1.1429.2.2.5.17			Cisco DSG Fault Information MIB.
faultSummary	1.3.6.1.4.1.1429.2.2.5.17.1
STR faultSummaryNumActiveAlarms	1.3.6.1.4.1.1429.2.2.5.17.1.1	DisplayString	read-only	Number of system alarms currently in a set state. The range is from 0 to 4294967295.
STR faultSummaryNumActiveWarnings	1.3.6.1.4.1.1429.2.2.5.17.1.2	DisplayString	read-only	Number of system Warnings currently in a set state. THe range is from 0 to 4294967295.
INT faultSummaryClearAlarms	1.3.6.1.4.1.1429.2.2.5.17.1.3	INTEGER	read-write	Set this object to yes( 2 ) to clear the system Alarms.
INT faultSummaryClearWarnings	1.3.6.1.4.1.1429.2.2.5.17.1.4	INTEGER	read-write	Set this object to yes( 2 ) to clear the system Warnings.
INT faultSummaryClearHistory	1.3.6.1.4.1.1429.2.2.5.17.1.5	INTEGER	read-write	Set this object to yes( 2 ) to clear the system History.
faultAWTable	1.3.6.1.4.1.1429.2.2.5.17.2
awFaultActiveListTable	1.3.6.1.4.1.1429.2.2.5.17.2.1		not-accessible	Alarms and warnings fault active list table.
awFaultActiveListEntry	1.3.6.1.4.1.1429.2.2.5.17.2.1.1		not-accessible	Entry for alarms and warnings fault active list.
I32 awFaultActiveListPriority	1.3.6.1.4.1.1429.2.2.5.17.2.1.1.1	Integer32	not-accessible	Priority of fault.Higher priority faults are displayed first.
STR awFaultActiveListTextID	1.3.6.1.4.1.1429.2.2.5.17.2.1.1.2	DisplayString	read-only	Fault ID.
STR awFaultActiveListName	1.3.6.1.4.1.1429.2.2.5.17.2.1.1.3	DisplayString	read-only	Faults displayed text.
INT awFaultActiveListType	1.3.6.1.4.1.1429.2.2.5.17.2.1.1.4	INTEGER	read-only	Active list type.
STR awFaultActiveListSetDateTime	1.3.6.1.4.1.1429.2.2.5.17.2.1.1.5	DisplayString	read-only	Date and time of fault condition occurred.
STR awFaultActiveListDetails	1.3.6.1.4.1.1429.2.2.5.17.2.1.1.6	DisplayString	read-only	Fault description.
awFaultStatusTable	1.3.6.1.4.1.1429.2.2.5.17.2.2		not-accessible	Alarms and warnings fault status.
awFaultStatusEntry	1.3.6.1.4.1.1429.2.2.5.17.2.2.1		not-accessible	Entry for Alarms and warnings fault status.
I32 awFaultStatusPriority	1.3.6.1.4.1.1429.2.2.5.17.2.2.1.1	Integer32	not-accessible	Fault status Priority value.
STR awFaultStatusTextId	1.3.6.1.4.1.1429.2.2.5.17.2.2.1.2	DisplayString	read-only	Fault Status Text ID.
STR awFaultStatusFaultNum	1.3.6.1.4.1.1429.2.2.5.17.2.2.1.3	DisplayString	read-only	Fault Status number.The range is from 0 to 4294967295.
STR awFaultStatusName	1.3.6.1.4.1.1429.2.2.5.17.2.2.1.4	DisplayString	read-only	Fault displayed text.
INT awFaultStatusType	1.3.6.1.4.1.1429.2.2.5.17.2.2.1.5	INTEGER	read-only	Fault Status type.
INT awFaultStatusSeverity	1.3.6.1.4.1.1429.2.2.5.17.2.2.1.6	INTEGER	read-only	Fault severity.
STR awFaultStatusLastDateTime	1.3.6.1.4.1.1429.2.2.5.17.2.2.1.7	DisplayString	read-only	Date&time of faults last state change.
INT awFaultStatusTrapState	1.3.6.1.4.1.1429.2.2.5.17.2.2.1.8	INTEGER	read-only	Trap state.
STR awFaultStatusDetails	1.3.6.1.4.1.1429.2.2.5.17.2.2.1.9	DisplayString	read-only	Faults descriptive reason.
STR awFaultStatusRelay	1.3.6.1.4.1.1429.2.2.5.17.2.2.1.10	DisplayString	read-only	Fault Relay control status.The range is from 0 to 8. Indicates which relay output this fault is hardcoded to control. Not used.
awFaultSettingTable	1.3.6.1.4.1.1429.2.2.5.17.2.3		not-accessible	Faults settings Table.
awFaultSettingEntry	1.3.6.1.4.1.1429.2.2.5.17.2.3.1		not-accessible	Entry for Faults settings Table.
I32 awFaultSettingPriority	1.3.6.1.4.1.1429.2.2.5.17.2.3.1.1	Integer32	not-accessible	Fault Setting Index (Fault Priority value).
STR awFaultSettingTextId	1.3.6.1.4.1.1429.2.2.5.17.2.3.1.2	DisplayString	read-only	Fault Setting Text ID.
INT awFaultSettingType	1.3.6.1.4.1.1429.2.2.5.17.2.3.1.3	INTEGER	read-only	Fault type.
INT awFaultSettingSeverity	1.3.6.1.4.1.1429.2.2.5.17.2.3.1.4	INTEGER	read-only	Fault severity.
STR awFaultSettingName	1.3.6.1.4.1.1429.2.2.5.17.2.3.1.5	DisplayString	read-only	Fault displayed text.
INT awFaultSettingEnable	1.3.6.1.4.1.1429.2.2.5.17.2.3.1.6	INTEGER	read-write	Controls overall enabling of this Fault.Affects LEDs, Relays, and Traps. disabled(3) is a read-only value.
INT awFaultSettingRelay	1.3.6.1.4.1.1429.2.2.5.17.2.3.1.7	INTEGER	read-write	Controls whether Relays are enabled for the Fault. disabled(3) is a read-only value.
INT awFaultSettingTrap	1.3.6.1.4.1.1429.2.2.5.17.2.3.1.8	INTEGER	read-write	Controls whether Traps are enabled for the Fault. disabled(3) is a read-only value.
awFaultHistoryTable	1.3.6.1.4.1.1429.2.2.5.17.2.5		not-accessible	Fault History table.
awFaultHistoryEntry	1.3.6.1.4.1.1429.2.2.5.17.2.5.1		not-accessible	Entry for Fault History table.
C32 awFaultHistorySequence	1.3.6.1.4.1.1429.2.2.5.17.2.5.1.1	Counter32	not-accessible	Fault History sequence number.
STR awFaultHistoryName	1.3.6.1.4.1.1429.2.2.5.17.2.5.1.2	DisplayString	read-only	Fault displayed text.
INT awFaultHistoryType	1.3.6.1.4.1.1429.2.2.5.17.2.5.1.3	INTEGER	read-only	Fault History list Type.
STR awFaultHistorySetDateTime	1.3.6.1.4.1.1429.2.2.5.17.2.5.1.4	DisplayString	read-only	Faults set date and time.
STR awFaultHistoryResetDateTime	1.3.6.1.4.1.1429.2.2.5.17.2.5.1.5	DisplayString	read-only	Faults reset date and time. If cleared by reset, contains the power-up time.
INT awFaultHistoryState	1.3.6.1.4.1.1429.2.2.5.17.2.5.1.6	INTEGER	read-only	Fault History list state.
STR awFaultHistoryDetails	1.3.6.1.4.1.1429.2.2.5.17.2.5.1.7	DisplayString	read-only	Fault descriptive Reason.

RFC description

Provides fault information and alarm management for Cisco DSG digital service platforms.

Start monitoring Cisco Digital Satellite Gateway/receivers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-DMN-DSG-FAULT-MIB

What Is CISCO-DMN-DSG-FAULT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description