CISCO-NHRP-EXT-MIB

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-NHRP-EXT-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2008-11-21

Category: Cisco Devices, IP and Core Protocols, VPN and Security

Description: Extends NHRP management with Cisco-specific attributes for DMVPN spoke-to-spoke tunnel establishment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-NHRP-EXT-MIB?

CISCO-NHRP-EXT-MIB is a Cisco Systems proprietary extension to the standard NHRP MIB (RFC 2677), adding notifications for critical Next Hop Resolution Protocol (NHRP, RFC 2332) events and Cisco-specific client/server statistics. Its objects cover the reason a next-hop was declared down, an NHRP exception indicator, and extended client/server statistics tables tracking redirect message counts, alongside notification-enable controls for server-up/-down style events. As a protocol-status/notification MIB it lets an administrator get alerted when an NHRP next-hop server becomes unreachable and track redirect traffic volume. It is deployed on Cisco routers running NHRP for DMVPN or similar dynamic-tunnel topologies. Engineers can download the CISCO-NHRP-EXT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-NHRP-EXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

  • Cisco routers running NHRP (e.g. DMVPN deployments)

Monitoring Examples

An administrator subscribes to cneNotifNextHopRegServerUp/Down-style notifications to get immediate alerts when an NHRP server in a DMVPN topology becomes unreachable, rather than discovering it via a spoke's failed tunnel.

What Can Be Monitored

  • next-hop down reason
  • NHRP redirect statistics
  • server reachability notifications
Imported Objects

From CISCO-SMI

ciscoMgmtOBJECT-IDENTITY

From IF-MIB

ifIndexOBJECT-TYPE
ifNameOBJECT-TYPE

From NHRP-MIB

nhrpCacheNbmaAddrOBJECT-TYPE
nhrpCacheNbmaAddrTypeOBJECT-TYPE
nhrpCacheNbmaSubaddrOBJECT-TYPE
nhrpCacheNextHopInternetworkAddrOBJECT-TYPE
nhrpCacheTypeOBJECT-TYPE
nhrpClientHoldTimeOBJECT-TYPE
nhrpClientIndexOBJECT-TYPE
nhrpClientInternetworkAddrOBJECT-TYPE
nhrpClientInternetworkAddrTypeOBJECT-TYPE
nhrpClientNbmaAddrOBJECT-TYPE
nhrpClientNbmaAddrTypeOBJECT-TYPE
nhrpClientNbmaSubaddrOBJECT-TYPE
nhrpClientNhsInUseOBJECT-TYPE
nhrpClientNhsInternetworkAddrOBJECT-TYPE
nhrpClientNhsInternetworkAddrTypeOBJECT-TYPE
nhrpClientNhsNbmaAddrOBJECT-TYPE
nhrpClientNhsNbmaAddrTypeOBJECT-TYPE
nhrpClientNhsNbmaSubaddrOBJECT-TYPE
nhrpClientRegUniquenessOBJECT-TYPE
nhrpClientStatEntryOBJECT-TYPE
nhrpServerCacheUniquenessOBJECT-TYPE
nhrpServerIndexOBJECT-TYPE
nhrpServerInternetworkAddrOBJECT-TYPE
nhrpServerInternetworkAddrTypeOBJECT-TYPE
nhrpServerNbmaAddrOBJECT-TYPE
nhrpServerNbmaAddrTypeOBJECT-TYPE
nhrpServerNbmaSubaddrOBJECT-TYPE
nhrpServerNhcInUseOBJECT-TYPE
nhrpServerNhcInternetworkAddrOBJECT-TYPE
nhrpServerNhcInternetworkAddrTypeOBJECT-TYPE
nhrpServerNhcNbmaAddrOBJECT-TYPE
nhrpServerNhcNbmaAddrTypeOBJECT-TYPE
nhrpServerNhcNbmaSubaddrOBJECT-TYPE
nhrpServerNhcPrefixLengthOBJECT-TYPE
nhrpServerStatEntryOBJECT-TYPE

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

TEXTUAL-CONVENTION

How to Use in IPNetwork Monitor

Example using cneClientStatRedirectRx OID:

Select a Cisco routers running NHRP (e.g. DMVPN) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cneClientStatRedirectRx into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object represents the number of NHRP Redirects received by the client. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs

RFC description

Provides extensions to NHRP (Next Hop Resolution Protocol) for Cisco devices managing cache and registration information.

Start monitoring Cisco routers running NHRP (e.g. DMVPN) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-NHRP-EXT-MIB