CIE1000-SYSLOG-MIB

All MIBs › CIE1000-SYSLOG-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2014-07-01

Category: Cisco Devices

Description: Manages syslog message storage, remote server configuration, and log level filtering on Cisco IE1000 industrial Ethernet switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIE1000-SYSLOG-MIB?

CIE1000-SYSLOG-MIB is a Cisco-private MIB for the Cisco IE1000 industrial Ethernet switch family that manages the device's syslog subsystem. It exposes configuration for remote syslog server destinations (mode, address, severity level) plus a history table of locally stored syslog messages, including message ID, severity level, timestamp, and message text. For monitoring, it is used to track the software/event-logging health of the switch—an admin can pull recent log entries to see software faults, configuration changes, or link events without console access, and verify remote logging is correctly configured and reaching its collector. It is a Cisco-private module independent of but complementary to the standard SNMPv2 notification framework, since it stores/forwards syslog text rather than SNMP traps. It is typically used in industrial/OT network deployments where centralized log collection from ruggedized switches is required for operational visibility. Network engineers evaluating or troubleshooting this functionality can download the CIE1000-SYSLOG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIE1000-SYSLOG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IE1000 industrial Ethernet switches

Monitoring Examples

An admin polls cie1000SyslogStatusHistoryTable (indexed by cie1000SyslogStatusHistorySwitchId and cie1000SyslogStatusHistoryMsgId) to read cie1000SyslogStatusHistoryMsgLevel, cie1000SyslogStatusHistoryMsgTimeStamp, and cie1000SyslogStatusHistoryMsgText for recent events. A cluster of high-severity entries around the same timestamp would flag a software fault or link disruption; separately, cie1000SyslogConfigServerAddress and cie1000SyslogConfigServerLevel confirm whether remote syslog forwarding is enabled and at what severity threshold.

What Can Be Monitored

remote syslog server configuration
syslog message severity level
syslog message history/text
message timestamps
switch ID for stacked/multi-switch logs

Imported Objects

From CIE1000-TC

CIE1000DisplayString
CIE1000InetAddress

From CISCO-IE1000-MIB

cie1000SwitchMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DateAndTime
TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cie1000SyslogMib	1.3.6.1.4.1.9.9.832.1.37			This is a private MIB for Syslog
cie1000SyslogMibObjects	1.3.6.1.4.1.9.9.832.1.37.1
cie1000SyslogConfig	1.3.6.1.4.1.9.9.832.1.37.1.2
cie1000SyslogConfigServer	1.3.6.1.4.1.9.9.832.1.37.1.2.1
T/F cie1000SyslogConfigServerMode	1.3.6.1.4.1.9.9.832.1.37.1.2.1.1	TruthValue	read-write	Indicates the syslog server mode operation. When the mode operation is enabled, the syslog message will send out to syslog server.
ADR cie1000SyslogConfigServerAddress	1.3.6.1.4.1.9.9.832.1.37.1.2.1.2	CIE1000InetAddress	read-write	The domain name of syslog server.
CIE cie1000SyslogConfigServerLevel	1.3.6.1.4.1.9.9.832.1.37.1.2.1.3	CIE1000SyslogLevelType	read-write	Indicates what level of message will send to syslog server. For example, the error level will send the specific messages which severity code is less or equal than error(3), the warning level will send the specific messages which severity code is less or equal than warning(4), the notice level will send the specific messages which severity code is less or equal than notice(5), the informational level will send the specific messages which severity code is less or equal than informational(6) and the enumeration option of all(8) isn't used in this case.
cie1000SyslogStatus	1.3.6.1.4.1.9.9.832.1.37.1.3
cie1000SyslogStatusHistoryTable	1.3.6.1.4.1.9.9.832.1.37.1.3.1		not-accessible	The syslog history table.
cie1000SyslogStatusHistoryEntry	1.3.6.1.4.1.9.9.832.1.37.1.3.1.1		not-accessible	Each row contains a set of parameters.
I32 cie1000SyslogStatusHistorySwitchId	1.3.6.1.4.1.9.9.832.1.37.1.3.1.1.1	Integer32	accessible-for-notify	The identification of switch. For non-stackable switch, the valid value is limited to 1.
I32 cie1000SyslogStatusHistoryMsgId	1.3.6.1.4.1.9.9.832.1.37.1.3.1.1.2	Integer32	accessible-for-notify	The identification of Syslog message.
CIE cie1000SyslogStatusHistoryMsgLevel	1.3.6.1.4.1.9.9.832.1.37.1.3.1.1.3	CIE1000SyslogLevelType	read-only	The severity level of the system log message. Note that enumeration option of all(8) isn't used in this case.
DAT cie1000SyslogStatusHistoryMsgTimeStamp	1.3.6.1.4.1.9.9.832.1.37.1.3.1.1.4	DateAndTime	read-only	The value of sysUpTime when this message was generated.
STR cie1000SyslogStatusHistoryMsgText	1.3.6.1.4.1.9.9.832.1.37.1.3.1.1.5	CIE1000DisplayString	read-only	The detailed context of the system log message.
cie1000SyslogControl	1.3.6.1.4.1.9.9.832.1.37.1.4
cie1000SyslogControlHistoryTable	1.3.6.1.4.1.9.9.832.1.37.1.4.1		not-accessible	The syslog history clear table.
cie1000SyslogControlHistoryEntry	1.3.6.1.4.1.9.9.832.1.37.1.4.1.1		not-accessible	Each row contains a set of parameters.
I32 cie1000SyslogControlHistorySwitchId	1.3.6.1.4.1.9.9.832.1.37.1.4.1.1.1	Integer32	accessible-for-notify	The identification of switch. For non-stackable switch, the valid value is limited to 1. For stackable switch, value 0 means the action is applied to all switches.
CIE cie1000SyslogControlHistoryClearLevel	1.3.6.1.4.1.9.9.832.1.37.1.4.1.1.2	CIE1000SyslogLevelType	accessible-for-notify	Indicates which level of message want to clear.
T/F cie1000SyslogControlHistoryClear	1.3.6.1.4.1.9.9.832.1.37.1.4.1.1.3	TruthValue	read-write	Clear syslog history by setting to true.
cie1000SyslogMibConformance	1.3.6.1.4.1.9.9.832.1.37.2
cie1000SyslogMibCompliances	1.3.6.1.4.1.9.9.832.1.37.2.1
cie1000SyslogMibCompliance	1.3.6.1.4.1.9.9.832.1.37.2.1.1			The compliance statement for the implementation.
cie1000SyslogMibGroups	1.3.6.1.4.1.9.9.832.1.37.2.2
cie1000SyslogConfigServerInfoGroup	1.3.6.1.4.1.9.9.832.1.37.2.2.1			A collection of objects.
cie1000SyslogStatusHistoryTableInfoGroup	1.3.6.1.4.1.9.9.832.1.37.2.2.2			A collection of objects.
cie1000SyslogControlHistoryTableInfoGroup	1.3.6.1.4.1.9.9.832.1.37.2.2.3			A collection of objects.

RFC description

Manages syslog server configuration and message severity levels on Cisco IE1000 switches.

Start monitoring Cisco IE1000 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIE1000-SYSLOG-MIB

What Is CIE1000-SYSLOG-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description