CISCO-FC-FE-MIB

All MIBs › CISCO-FC-FE-MIB

Organization: Cisco Systems Inc.

Last Updated: 2021-02-12

Category: Cisco Devices, Fibre Channel and Storage

Description: Provides management objects for monitoring Fibre Channel fabric element statistics and port performance on Cisco MDS SAN switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-FC-FE-MIB?

CISCO-FC-FE-MIB is a Cisco Fibre Channel fabric element management MIB for MDS SAN switches, extending the standard IF-MIB and the FIBRE-CHANNEL-FE-MIB with Cisco-specific fabric port objects. It exposes configuration data (admin mode, admin speed, trunk mode, port channel membership) and operational status data (operational mode, operational status cause, beacon mode) for Fibre Channel ports including N_port, NL_port, E_port, and B_port types. It is explicitly useful for monitoring hardware/link status of SAN fabric ports: fcIfOperMode and fcIfOperStatusCause/fcIfOperStatusCauseDescr reveal why a port is up, down, or in a particular operating mode, which is critical for diagnosing SAN connectivity issues. It has a notable dependency on both the standard IF-MIB (as a Cisco extension) and the FIBRE-CHANNEL-FE-MIB standard, whose relevant groups it incorporates. It is deployed on Cisco MDS 9000 series SAN switches interconnecting storage arrays and hosts. Network engineers evaluating or troubleshooting this functionality can download the CISCO-FC-FE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-FC-FE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco MDS Fibre Channel SAN switches

Monitoring Examples

An engineer would poll fcIfTable/fcIfEntry to check fcIfOperStatusCause and fcIfOperStatusCauseDescr on a port reporting down, and compare fcIfAdminMode/fcIfAdminSpeed against fcIfOperMode to detect a speed or mode mismatch. Repeated changes in fcIfOperStatusCause on an Nx_port would point to a flapping host or storage connection, while fcIfPortChannelIfIndex helps identify whether the affected port is part of a port-channel bundle.

What Can Be Monitored

FC port admin/operational mode
port operational status cause
port speed configuration
trunk mode and port-channel membership
beacon mode status

Imported Objects

From CISCO-IF-EXTENSION-MIB

cieIfOperStatusCause

OBJECT-TYPE

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From CISCO-ST-TC

FcAddressId
FcClassOfServices
FcIfServiceStateType
FcIfSpeed
FcNameId
FcPortModuleTypes
FcPortTxTypes
FcPortTypes

From CISCO-TC

CiscoMilliSeconds
MicroSeconds

From CISCO-VSAN-MIB

vsanIndex

OBJECT-TYPE

From CISCO-ZS-MIB

FcList

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From IF-MIB

InterfaceIndexOrZero
ifIndex	OBJECT-TYPE

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using fcIfLinkFailures OID:

Select a Cisco MDS Fibre Channel SAN switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type fcIfLinkFailures into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of link failures detected by the FC-Port. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT adminTrunkProtocol	1.3.6.1.4.1.9.9.289.1.1.8	INTEGER	read-write	The object to either enable or disable the trunking protocol for the device. The trunking protocol is used for negotiating trunk mode and calculating operational VSANs on an EISL link. It also performs port VSAN consistency checks. On non-trunking ISL links, if the port VSANs are different, the E ports will be isolated. To avoid this isolation, this MIB variable should be set to 'disable(2)'. enable(1) - enables trunking protocol. disable (2) - disables the trunking protocol.
cffFcFeConfig	1.3.6.1.4.1.9.9.289.1.1
FCN cffFcFeElementName	1.3.6.1.4.1.9.9.289.1.1.1	FcNameId	read-write	The World-Wide Name of this fabric element. It's a 64-bit identifier and is unique worldwide.
cffFcFeMIBCompliance	1.3.6.1.4.1.9.9.289.2.1.1			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBCompliance1	1.3.6.1.4.1.9.9.289.2.1.2			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBCompliance2	1.3.6.1.4.1.9.9.289.2.1.3			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBCompliance3	1.3.6.1.4.1.9.9.289.2.1.4			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBCompliance4	1.3.6.1.4.1.9.9.289.2.1.5			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBCompliance5	1.3.6.1.4.1.9.9.289.2.1.6			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBComplianceRev10	1.3.6.1.4.1.9.9.289.2.1.11			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBComplianceRev11	1.3.6.1.4.1.9.9.289.2.1.12			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBComplianceRev12	1.3.6.1.4.1.9.9.289.2.1.13			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBComplianceRev13	1.3.6.1.4.1.9.9.289.2.1.14			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBComplianceRev14	1.3.6.1.4.1.9.9.289.2.1.15			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBComplianceRev15	1.3.6.1.4.1.9.9.289.2.1.16			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBComplianceRev16	1.3.6.1.4.1.9.9.289.2.1.17			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBComplianceRev17	1.3.6.1.4.1.9.9.289.2.1.18			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBComplianceRev6	1.3.6.1.4.1.9.9.289.2.1.7			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBComplianceRev7	1.3.6.1.4.1.9.9.289.2.1.8			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBComplianceRev8	1.3.6.1.4.1.9.9.289.2.1.9			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBComplianceRev9	1.3.6.1.4.1.9.9.289.2.1.10			The compliance statement for entities which implement the CISCO-FC-FE-MIB.
cffFcFeMIBCompliances	1.3.6.1.4.1.9.9.289.2.1
cffFcFeMIBConformance	1.3.6.1.4.1.9.9.289.2
cffFcFeMIBGroups	1.3.6.1.4.1.9.9.289.2.2
cffFcFeNotification	1.3.6.1.4.1.9.9.289.1.3
cffFcFeNotifications	1.3.6.1.4.1.9.9.289.1.3.0
cffFcFeStatistics	1.3.6.1.4.1.9.9.289.1.2
ciscoFcFeMIB	1.3.6.1.4.1.9.9.289			This is the Cisco fibre element management MIB module. It covers: - Cisco extension to the interface MIB ( IF-MIB ) - Contains all the groups from FIBRE-CHANNEL-FE-MIB relevant to Cisco fabric. - Other features specific to Cisco fabric. This MIB supports all the port types defined by the textual convention FcPortTypes. In addition it also supports Nx_port, where Nx_port can be either N_port or NL_port. The FC standards define Interconnect_Ports to be E_ports or B_Ports. This MIB supports Port Channel ports. Port Channel port is a single logical port, which contains multiple physical ports as its members. Presently only E_ports can be a member of Port Channel port. In addition it provides GigE and port channel information for all the Gigabit Ethernet (GigE) ports in the fabric. Terminology ELP : Exchange Link parameters EPP : Exchange Peer Parameters.
ciscoFcFeObjects	1.3.6.1.4.1.9.9.289.1
fcFeGroup	1.3.6.1.4.1.9.9.289.2.2.1			A collection objects giving port information.
fcFeGroupRev1	1.3.6.1.4.1.9.9.289.2.2.35			A collection of objects providing port information on congestion, credit buffer starvation and slow traffic movement.
C64 fcHCIfBBCreditTransistionFromZero	1.3.6.1.4.1.9.9.289.1.2.1.1.40	Counter64	read-only	fcHCIfBBCreditTransistionFromZero increments if the transmit b2b credit is zero.
C64 fcHCIfBBCreditTransistionToZero	1.3.6.1.4.1.9.9.289.1.2.1.1.41	Counter64	read-only	fcHCIfBBCreditTransistionToZero increments if the receive b2b credit is zero.
C64 fcHCIfTxWaitCount	1.3.6.1.4.1.9.9.289.1.2.1.1.47	Counter64	read-only	The number of times the FC-port waited due to lack of transmit credits. This object is a 64-bit version of fcIfTxWaitCount.
C32 fcIf8b10bDisparityErrors	1.3.6.1.4.1.9.9.289.1.2.1.1.25	Counter32	read-only	The number of 8b10b disparity errors.
FCL fcIfActiveVsanList2k	1.3.6.1.4.1.9.9.289.1.1.2.1.13	FcList	read-only	The list of VSANs (in the range 0 through 2047) this port is associated with. Only ports operating in trunk mode can belong to multiple VSANs. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second octet specifying VSANs 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, that this port is associated with, is represented by a single bit within the value of this object. The corresponding VSAN that this port is a member of is active if and only if that bit has a value of '1'. Note that the zero-length string represents that none of the VSANs that this port is a member of are active. VSAN 0 is reserved. This object is applicable to only ports operating in trunk mode.
FCL fcIfActiveVsanList4k	1.3.6.1.4.1.9.9.289.1.1.2.1.14	FcList	read-only	The list of VSANs (in the range 2048 through 4096) this port is associated with. Only ports operating in trunk mode can belong to multiple VSANs. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 2048 through 2055, the second octet specifying VSANs 2056 through 2063, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, that this port is associated with, is represented by a single bit within the value of this object. The corresponding VSAN that this port is a member of is active if and only if that bit has a value of '1'. Note that the zero-length string represents that none of the VSANs that this port is a member of are active. This object is applicable to only ports operating in trunk mode.
FCL fcIfActiveVsanUpList2k	1.3.6.1.4.1.9.9.289.1.1.2.1.29	FcList	read-only	The list of VSANs (in the range 0 through 2047) whose operational state is 'up', that this port is associated with. Only ports operating in trunk mode can be associated to multiple VSANs. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second octet specifying VSANs 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, whose operational state is 'up', that this port is associated with, is represented by a single bit within the value of this object. The corresponding VSAN that this port is a member of is operationally 'up' if and only if that bit has a value of '1'. Note that the zero-length string represents that none of the VSANs that this port is a member of are operationally 'up'. VSAN 0 is reserved. This object is applicable to only ports operating in trunk mode.
FCL fcIfActiveVsanUpList4k	1.3.6.1.4.1.9.9.289.1.1.2.1.30	FcList	read-only	The list of VSANs (in the range 2048 to 4096 ) whose operational state is 'up', that this port is associated with. Only ports operating in trunk mode can be associated to multiple VSANs. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 2048 through 2055, the second octet specifying VSANs 2056 through 2063, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, whose operational state is 'up', that this port is associated with, is represented by a single bit within the value of this object. The corresponding VSAN that this port is a member of is operationally 'up' if and only if that bit has a value of '1'. Note that the zero-length string represents that none of the VSANs that this port is a member of are active. This object is applicable to only ports operating in trunk mode.
C32 fcIfAddressIdErrors	1.3.6.1.4.1.9.9.289.1.2.1.1.8	Counter32	read-only	The number of address identifier errors detected by the FC-Port.
T/F fcIfAdminBbScnMode	1.3.6.1.4.1.9.9.289.1.1.2.1.39	TruthValue	read-write	The Buffer-to-buffer State Change Number (BB_SC_N) field (word 1, bits 15-12) specifies the Buffer-to-buffer State Change Number. It indicates that the sender of the PLOGI or FLOGI frame is requesting 2 power BB_SC_N number of frames to be sent between two consecutive BB_SCs primitives, and 2 power BB_SC_N number of R_RDY primitives to be sent between two consecutive BB_SCr primitives. If 'true', the BB_SC_N mode is enabled. If 'false', the BB_SC_N mode is disabled.
INT fcIfAdminFECState	1.3.6.1.4.1.9.9.289.1.1.2.1.41	INTEGER	read-write	The port FEC state configured by the user. When set to up(1), the port negotiates and converts the link into operational FEC up only if the neighboring port fcIfAdminFECState is up(1). When set to down(2) the fcIfOperFECState for this port and the neighboring port remains down(2) after negotiation. If this interface is a member of a port channel then this object cannot be modified.
INT fcIfAdminFecTtsState	1.3.6.1.4.1.9.9.289.1.1.2.1.43	INTEGER	read-write	The port FEC (Forward Error Correction) TTS (Transmitter Training Signal) state configured by the user. When set to up, it enables TTS allowing negotiation of FEC capability only if the neighboring port fcIfAdminFecTtsState is up. When set to down the fcIfOperFecTtsState for this port and the neighboring port remains down after negotiation. If this interface is a member of a port channel then this object cannot be modified.
FCP fcIfAdminMode	1.3.6.1.4.1.9.9.289.1.1.2.1.2	FcPortTypes	read-write	The port mode configured by the user. If the user configured the port as auto(1), then the port initialization scheme determines the mode of the port. In this case the user can look at 'fcIfOperMode' to determine the current operating mode of port. If this interface is a Port Channel port then only auto(1) or ePort(4) is allowed.
FCB fcIfAdminRxBbCredit	1.3.6.1.4.1.9.9.289.1.1.2.1.24	FcBbCredit	read-write	The receive buffer-to-buffer credits configured for this port. If the value configured is zero, then the value of the object fcIfCapOsmRxBbCreditDefault or fcIfCapFrmRxBbCreditDefault is used if the port is operating in Fx mode. Value of fcIfCapOsmRxBbCreditDefault is used if fcIfPortRateMode is 'shared'. Value of fcIfCapFrmRxBbCreditDefault is used if fcIfPortRateMode is 'dedicated'. Similarly, if the port is operating in inter switch link (ISL) mode then the value of the object fcIfCapOsmISLRxBbCreditDefault or fcIfCapFrmISLRxBbCreditDefault is used. Value of fcIfCapOsmISLRxBbCreditDefault is used if fcIfPortRateMode is 'shared'. Value of fcIfCapFrmISLRxBbCreditDefault is used if fcIfPortRateMode is 'dedicated'. If a non-zero value is configured for this object then, if the values configured for fcIfAdminRxBbCreditModeISL and fcIfAdminRxBbCreditModeFx is zero, then the value of this object is used for the port operating in either Fx or ISL port mode. But if fcIfAdminRxBbCreditModeISL is configured with a valid value, then the value of fcIfAdminRxBbCreditModeISL object is used instead of this value, if the port is operating in ISL port mode. Similarly, if the values configured for fcIfAdminRxBbCreditModeFx is valid, then the value of fcIfAdminRxBbCreditModeFx object is used instead of this value, if the port is operating in Fx mode. If this object is set to non-zero value then objects fcIfAdminRxBbCreditModeISL and fcIfAdminRxBbCreditModeFx are set to zero at that time. But later the objects fcIfAdminRxBbCreditModeISL and fcIfAdminRxBbCreditModeFx can be configured to non-zero values even if this object present value is non-zero. NOTE: The value of this object is not used if cfcFeatureCtrlIndex object is configured with a value of 'extenedCredit' and fcIfAdminRxBbCreditExtended object is configured.
FCB fcIfAdminRxBbCreditExtended	1.3.6.1.4.1.9.9.289.1.1.2.1.36	FcBbCredit	read-write	This object specifies the extended BB credits that can be configured on an FC port (in the range 256 through 4095). The acceptable value depends on the BB credit configuration of other ports in the line card. Since this is an optional feature, the value of this object can only be modified after (enabling extended credit feature) cfcFeatureCtrlIndex object is configured with a value of 'extenedCredit'. If extended credit feature is enabled, the MIB objects fcIfAdminRxBbCredit, fcIfAdminRxBbCreditModeISL, fcIfAdminRxBbCreditModeFx values are not used; instead fcIfAdminRxBbCreditExtended is used regardless of port mode operation. If extended credit feature is disabled, the previous configured values of fcIfAdminRxBbCredit fcIfAdminRxBbCreditModeISL, fcIfAdminRxBbCreditModeFx are used as defined. NOTE: This object can be modified only on certain modules having hardware capability to support the extended BB credit feature.
FCB fcIfAdminRxBbCreditModeFx	1.3.6.1.4.1.9.9.289.1.1.2.1.26	FcBbCredit	read-write	The receive buffer-to-buffer credits configured for this port to be used if it is operating in Fx mode. NOTE: The value of this object is not used if cfcFeatureCtrlIndex object is configured with a value of 'extenedCredit' and fcIfAdminRxBbCreditExtended object is configured.
FCB fcIfAdminRxBbCreditModeISL	1.3.6.1.4.1.9.9.289.1.1.2.1.25	FcBbCredit	read-write	The receive buffer-to-buffer credits configured for this port to be used if it is operating in xE_port mode. NOTE: The value of this object is not used if cfcFeatureCtrlIndex object is configured with a value of 'extenedCredit' and fcIfAdminRxBbCreditExtended object is configured.
FCP fcIfAdminRxPerfBuffer	1.3.6.1.4.1.9.9.289.1.1.2.1.32	FcPerfBuffer	read-write	The performance buffers configured for this port. These buffers in addition to the buffer-to-buffer credits are used to improve the performance of a port, hence called 'Performance buffers'. If a value of zero is set for this object, then the agent uses the built-in algorithm to calculate the number of performance buffers to be used.
FCI fcIfAdminSpeed	1.3.6.1.4.1.9.9.289.1.1.2.1.4	FcIfSpeed	read-write	The port speed configured by the user. If this interface is a member of a port channel port then this object cannot be modified. Since this is a characteristic of a physical port, this object may not be applicable for some non-physical ports, i.e., the value is instantiated but its value is irrelevant.
INT fcIfAdminTrunkMode	1.3.6.1.4.1.9.9.289.1.1.2.1.9	INTEGER	read-write	The trunking mode configured by the user. When set to 'nonTrunk(1)', the port negotiates and converts the link into non-trunking mode. This port and the neighboring port's fcIfOperTrunkMode becomes non-trunk. When set to 'trunk(2)', the port negotiates and converts the link into trunking mode only if the neighboring port, fcIfAdminTrunkMode is either 'trunk(2)' or 'auto(3)'. When set to 'auto(3)', the port is willing to convert the link to a trunk link only if the the neighboring port, fcIfAdminTrunkMode is set to 'trunk(2)' mode.
FCL fcIfAllowedVsanList2k	1.3.6.1.4.1.9.9.289.1.1.2.1.11	FcList	read-write	The list of VSANs (in the range 0 through 2047) which are allowed to be received/transmitted on the port when the port is operating in trunking mode. Only ports operating in trunk mode can belong to multiple VSANs. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 0 through 7, the second octet specifying VSANs 8 through 15, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, is represented by a single bit within the value of this object. The corresponding VSAN is allowed on this port if and only if that bit has a value of '1'. VSAN 0 is reserved. This object is applicable to only ports operating in trunk mode. The value configured to this object will be retained but will not be applicable when the port is put into non-trunking mode. It will be again applicable when the port is operating in trunking mode. Similarly, it can be modified at the time when this object is not applicable, i.e. when the port is operating in non-trunking mode, but the modified value is retained for use on subsequent occasions when this object is applicable when the port is operating in trunking mode.
FCL fcIfAllowedVsanList4k	1.3.6.1.4.1.9.9.289.1.1.2.1.12	FcList	read-write	The list of VSANs (in the range 2048 to 4096 ) which are allowed to be received/transmitted on the port when the port is operating in trunking mode. Only ports operating in trunk mode can belong to multiple VSANs. Each octet within the value of this object specifies a set of eight VSANs, with the first octet specifying VSANs 2048 through 2055, the second octet specifying VSANs 2056 through 2063, etc. Within each octet, the most significant bit represents the lowest numbered VSAN, and the least significant bit represents the highest numbered VSAN. Thus, each VSAN, is represented by a single bit within the value of this object. The corresponding VSAN is allowed on this port if and only if that bit has a value of '1'. This object is applicable to only ports operating in trunk mode. The value configured to this object will be retained but will not be applicable when the port is put into non-trunking mode. It will be again applicable when the port is operating in trunking mode. Similarly, it can be modified at the time when this object is not applicable, i.e. when the port is operating in non-trunking mode, but the modified value is retained for use on subsequent occasions when this object is applicable when the port is operating in trunking mode.
FCB fcIfBbCreditModel	1.3.6.1.4.1.9.9.289.1.1.2.1.15	FcBbCreditModel	read-only	The BB_Credit model used by the FC-port. The alternate BB_Credit management model can be used in the arbitrated loop topology to manage the flow of frames between the two ports participating in the current loop circuit. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value is instantiated but its value is irrelevant.
C32 fcIfBBCreditTransistionFromZero	1.3.6.1.4.1.9.9.289.1.2.1.1.28	Counter32	read-only	fcIfBBCreditTransistionFromZero increments if the transmit b2b credit is zero
C32 fcIfBBCreditTransistionToZero	1.3.6.1.4.1.9.9.289.1.2.1.1.39	Counter32	read-only	fcIfBBCreditTransistionToZero increments if the receive b2b credit is zero
U32 fcIfBbScn	1.3.6.1.4.1.9.9.289.1.1.2.1.34	Unsigned32	read-only	The buffer-to-buffer state change number operational on this interface.
fcIfBbScnGroup	1.3.6.1.4.1.9.9.289.2.2.23			A collection of objects providing information what the port is capable of supporting.
T/F fcIfBeaconMode	1.3.6.1.4.1.9.9.289.1.1.2.1.5	TruthValue	read-write	The Beacon mode configured by the user. If 'true', the Beacon mode is enabled. If 'false', the beacon mode is disabled. In Beacon mode, an interface LED is put into flashing mode for easy identification of a particular interface.
fcIfC2AccountingEntry	1.3.6.1.4.1.9.9.289.1.2.2.1		not-accessible	Each entry contains Class 2 accounting information for each F, FL or TL port.
fcIfC2AccountingGroup	1.3.6.1.4.1.9.9.289.2.2.8			A collection of objects providing class 2 accounting information of the ports.
fcIfC2AccountingTable	1.3.6.1.4.1.9.9.289.1.2.2		not-accessible	This table contains, one entry for each F, FL or TL ports in the fabric element, including Port Channel ports. It contains Class 2 accounting information.
C32 fcIfC2Discards	1.3.6.1.4.1.9.9.289.1.2.2.1.5	Counter32	read-only	The number of Class 2 frames discarded by this port.
C32 fcIfC2FbsyFrames	1.3.6.1.4.1.9.9.289.1.2.2.1.6	Counter32	read-only	The number of F_BSY frames generated by this port against Class 2 frames.
C32 fcIfC2FrjtFrames	1.3.6.1.4.1.9.9.289.1.2.2.1.7	Counter32	read-only	The number of F_RJT frames generated by this port against Class 2 frames.
C64 fcIfC2InFrames	1.3.6.1.4.1.9.9.289.1.2.2.1.1	Counter64	read-only	The number of Class 2 frames received by this port from its attached Nx_Port.
C64 fcIfC2InOctets	1.3.6.1.4.1.9.9.289.1.2.2.1.3	Counter64	read-only	The number of Class 2 frame octets, including the frame delimiters, received by this port from its attached Nx_Port.
C64 fcIfC2OutFrames	1.3.6.1.4.1.9.9.289.1.2.2.1.2	Counter64	read-only	The number of Class 2 frames delivered through this port to its attached Nx_Port.
C64 fcIfC2OutOctets	1.3.6.1.4.1.9.9.289.1.2.2.1.4	Counter64	read-only	The number of Class 2 frame octets, including the frame delimiters, delivered through this port to its attached Nx_Port.
C32 fcIfC2PBSYFrames	1.3.6.1.4.1.9.9.289.1.2.2.1.8	Counter32	read-only	The number of times that port busy was returned to this port as result of a class 2 frame that could not be delivered to the other end of the link. This occurs if the destination Nx_Port is temporarily busy. PBSY can only occur on SOFc1 frames ( the frames that establish a connection ).
C32 fcIfC2PRJTFrames	1.3.6.1.4.1.9.9.289.1.2.2.1.9	Counter32	read-only	The number of times that port reject was returned to this port as a result of a class 2 frame that was rejected at the destination Nx_Port.
fcIfC3AccountingEntry	1.3.6.1.4.1.9.9.289.1.2.3.1		not-accessible	Each entry contains Class 3 accounting information for each F, FL or TL port.
fcIfC3AccountingGroup	1.3.6.1.4.1.9.9.289.2.2.9			A collection of objects providing class 3 accounting information of the ports.
fcIfC3AccountingTable	1.3.6.1.4.1.9.9.289.1.2.3		not-accessible	This table contains, one entry for each F, FL or TL ports in the fabric element, including Port Channel ports. It contains Class 3 accounting information.
C32 fcIfC3Discards	1.3.6.1.4.1.9.9.289.1.2.3.1.5	Counter32	read-only	The number of Class 3 frames discarded by this port.
C64 fcIfC3InFrames	1.3.6.1.4.1.9.9.289.1.2.3.1.1	Counter64	read-only	The number of Class 3 frames received by this port from its attached Nx_Port.
C64 fcIfC3InOctets	1.3.6.1.4.1.9.9.289.1.2.3.1.3	Counter64	read-only	The number of Class 3 frame octets, including the frame delimiters, received by this port from its attached Nx_Port.
C64 fcIfC3OutFrames	1.3.6.1.4.1.9.9.289.1.2.3.1.2	Counter64	read-only	The number of Class 3 frames transmitted by this port to its attached Nx_Port.
C64 fcIfC3OutOctets	1.3.6.1.4.1.9.9.289.1.2.3.1.4	Counter64	read-only	The number of Class 3 frame octets, including the frame delimiters, transmitted by this port to its a attached Nx_Port.
fcIfCapableGroup	1.3.6.1.4.1.9.9.289.2.2.24			This is a group of objects that help the user figure out if the system is capable of a change in the given object.
T/F fcIfCapBbScnCapable	1.3.6.1.4.1.9.9.289.1.1.7.1.17	TruthValue	read-only	Indicates whether this interface is capable of handling buffer-to-buffer state change number. 'true' : capable of handling. 'false' : it is not capable of handling it.
U32 fcIfCapBbScnMax	1.3.6.1.4.1.9.9.289.1.1.7.1.18	Unsigned32	read-only	The maximum buffer-to-buffer state change number this interface can handle.
T/F fcIfCapClass2SeqDeliv	1.3.6.1.4.1.9.9.289.1.1.7.1.8	TruthValue	read-only	The flag indicating whether or not the FC-Port is capable of supporting Class 2 Sequential Delivery.
T/F fcIfCapClass3SeqDeliv	1.3.6.1.4.1.9.9.289.1.1.7.1.9	TruthValue	read-only	The flag indicating whether or not the FC-Port is capable of supporting Class 3 Sequential Delivery.
FCC fcIfCapCos	1.3.6.1.4.1.9.9.289.1.1.7.1.7	FcClassOfServices	read-only	The Bit mask indicating the set of Classes of Service that the FC-Port is capable of supporting.
fcIfCapEntry	1.3.6.1.4.1.9.9.289.1.1.7.1		not-accessible	Each entry contains the Capability of a FC-Port.
FCP fcIfCapFcphVersionHigh	1.3.6.1.4.1.9.9.289.1.1.7.1.1	FcphVersion	read-only	The highest version of FC-PH that the FC-Port is capable of supporting.
FCP fcIfCapFcphVersionLow	1.3.6.1.4.1.9.9.289.1.1.7.1.2	FcphVersion	read-only	The lowest version of FC-PH that the FC-Port is capable of supporting.
fcIfCapFrmEntry	1.3.6.1.4.1.9.9.289.1.1.12.1		not-accessible	Each entry contains the Capability of a FC-Port operating in Full Rate mode.
FCB fcIfCapFrmISLRxBbCreditDefault	1.3.6.1.4.1.9.9.289.1.1.12.1.7	FcBbCredit	read-only	The default receive buffer-to-buffer credits if the port is operating in inter switch link mode.
FCB fcIfCapFrmISLRxBbCreditMax	1.3.6.1.4.1.9.9.289.1.1.12.1.5	FcBbCredit	read-only	The maximum number of receive buffers the port hardware is capable of receiving from the attached Inter Connect port. This object is applicable to ports operating in inter switch link mode.
FCB fcIfCapFrmISLRxBbCreditMin	1.3.6.1.4.1.9.9.289.1.1.12.1.6	FcBbCredit	read-only	The minimum number of receive buffers the port hardware is capable of receiving from the attached xE_port or B_port. This object is applicable to ports operating in inter switch link mode.
FCP fcIfCapFrmISLRxPerfBufDefault	1.3.6.1.4.1.9.9.289.1.1.12.1.14	FcPerfBuffer	read-only	The default performance buffers if the port is operating as an inter switch link port.
FCP fcIfCapFrmISLRxPerfBufMax	1.3.6.1.4.1.9.9.289.1.1.12.1.12	FcPerfBuffer	read-only	The maximum number of performance buffers that can be configured for this port. This object is applicable to inter switch link ports.
FCP fcIfCapFrmISLRxPerfBufMin	1.3.6.1.4.1.9.9.289.1.1.12.1.13	FcPerfBuffer	read-only	The minimum number of performance buffers that can be configured for this port. This object is applicable to inter switch link ports.
FCB fcIfCapFrmRxBbCreditDefault	1.3.6.1.4.1.9.9.289.1.1.12.1.4	FcBbCredit	read-only	The default receive buffer-to-buffer credits if the port is operating in Fx mode.
FCB fcIfCapFrmRxBbCreditMax	1.3.6.1.4.1.9.9.289.1.1.12.1.2	FcBbCredit	read-only	The maximum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx mode.
FCB fcIfCapFrmRxBbCreditMin	1.3.6.1.4.1.9.9.289.1.1.12.1.3	FcBbCredit	read-only	The minimum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx mode.
T/F fcIfCapFrmRxBbCreditWriteable	1.3.6.1.4.1.9.9.289.1.1.12.1.1	TruthValue	read-only	The value indicating whether the port operating in full rate mode is capable of allowing the user to configure receive buffer to buffer credit. The values configured for the objects: fcIfAdminRxBbCredit, fcIfAdminRxBbCreditModeISL, fcIfAdminRxBbCreditModeFx will take effect only if the value of this object is true(1), otherwise the default values specified by the objects: fcIfCapFrmRxBbCreditDefault, fcIfCapFrmISLRxBbCreditDefault will stay in effect depending on the operating mode of the port.
FCP fcIfCapFrmRxPerfBufDefault	1.3.6.1.4.1.9.9.289.1.1.12.1.11	FcPerfBuffer	read-only	The default performance buffers if the port is operating in Fx mode. The object is applicable to ports operating in Fx mode.
FCP fcIfCapFrmRxPerfBufMax	1.3.6.1.4.1.9.9.289.1.1.12.1.9	FcPerfBuffer	read-only	The maximum number of performance buffers that can be configured for this port. The object is applicable to ports operating in Fx mode.
FCP fcIfCapFrmRxPerfBufMin	1.3.6.1.4.1.9.9.289.1.1.12.1.10	FcPerfBuffer	read-only	The minimum number of performance buffers that can be configured for this port. The object is applicable to ports operating in Fx mode.
T/F fcIfCapFrmRxPerfBufWriteable	1.3.6.1.4.1.9.9.289.1.1.12.1.8	TruthValue	read-only	The value indicating whether the port is capable of allowing the user to configure receive performance buffers. The values configured for the objects: fcIfAdminRxPerfBuffer will take effect only if the value of this object is true(1), otherwise the default values specified by the objects: fcIfCapFrmRxPerfBufDefault, fcIfCapFrmISLRxPerfBufDefault will stay in effect depending on the operating mode of the port.
fcIfCapFrmTable	1.3.6.1.4.1.9.9.289.1.1.12		not-accessible	This table contains, one entry for each FC-Port which is capable of operating in Full Rate mode. It contains information describing about what each FC-port is inherently capable of operating or supporting in full rate mode. Entries in this table are created/deleted on an as-needed basis by the agent. NOTE: This table has objects which represent the characteristics of a physical port. Thus, Port Channel ports are not represented in this table.
fcIfCapGroup	1.3.6.1.4.1.9.9.289.2.2.6			A collection of objects providing information what the port is capable of supporting.
fcIfCapGroupRev1	1.3.6.1.4.1.9.9.289.2.2.13			A collection of objects providing information what the port is capable of supporting.
MIC fcIfCapHoldTimeMax	1.3.6.1.4.1.9.9.289.1.1.7.1.10	MicroSeconds	read-only	The maximum holding time ( in microseconds ) that the FC-Port is capable of supporting.
MIC fcIfCapHoldTimeMin	1.3.6.1.4.1.9.9.289.1.1.7.1.11	MicroSeconds	read-only	The minimum holding time ( in microseconds ) that the FC-Port is capable of supporting.
FCB fcIfCapISLRxBbCreditDefault	1.3.6.1.4.1.9.9.289.1.1.7.1.16	FcBbCredit	read-only	The default receive buffer-to-buffer credits if the port is operating in xE_port mode.
FCB fcIfCapISLRxBbCreditMax	1.3.6.1.4.1.9.9.289.1.1.7.1.12	FcBbCredit	read-only	The maximum number of receive buffers the port hardware is capable of receiving from the attached Inter Connect port. This object is applicable to ports operating in xE_port mode.
FCB fcIfCapISLRxBbCreditMin	1.3.6.1.4.1.9.9.289.1.1.7.1.13	FcBbCredit	read-only	The minimum number of receive buffers the port hardware is capable of receiving from the attached xE_port or B_port. This object is applicable to ports operating in xE_port mode.
fcIfCapOsmEntry	1.3.6.1.4.1.9.9.289.1.1.11.1		not-accessible	Each entry contains the Capability of a FC-Port operating in over subscribed mode.
T/F fcIfCapOsmFrmCapable	1.3.6.1.4.1.9.9.289.1.1.7.1.19	TruthValue	read-only	This value indicates whether this interface is capable to operate in different port rate modes. 'true' : the port is capable of being configured with the mode it is to operate in, e.g., a port which can operate in over subscription mode and full rate mode. 'false': the port rate mode cannot be changed. If the value of this object is 'true' then the fcIfCapOsmTable would show the values of the port when it operates in over subscribed mode and fcIfCapFrmTable would show the values when it operates in full rate mode. The currently configured mode is given by fcIfPortRateMode.
FCB fcIfCapOsmISLRxBbCreditDefault	1.3.6.1.4.1.9.9.289.1.1.11.1.7	FcBbCredit	read-only	The default receive buffer-to-buffer credits if the port is operating in inter switch link mode.
FCB fcIfCapOsmISLRxBbCreditMax	1.3.6.1.4.1.9.9.289.1.1.11.1.5	FcBbCredit	read-only	The maximum number of receive buffers the port hardware is capable of receiving from the attached Inter Connect port. This object is applicable to ports operating in inter switch link mode.
FCB fcIfCapOsmISLRxBbCreditMin	1.3.6.1.4.1.9.9.289.1.1.11.1.6	FcBbCredit	read-only	The minimum number of receive buffers the port hardware is capable of receiving from the attached xE_port or B_port. This object is applicable to ports operating in inter switch link mode.
FCP fcIfCapOsmISLRxPerfBufDefault	1.3.6.1.4.1.9.9.289.1.1.11.1.14	FcPerfBuffer	read-only	The default performance buffers if the port is operating as an inter switch link port.
FCP fcIfCapOsmISLRxPerfBufMax	1.3.6.1.4.1.9.9.289.1.1.11.1.12	FcPerfBuffer	read-only	The maximum number of performance buffers that can be configured for this port. This object is applicable to inter switch link ports.
FCP fcIfCapOsmISLRxPerfBufMin	1.3.6.1.4.1.9.9.289.1.1.11.1.13	FcPerfBuffer	read-only	The minimum number of performance buffers that can be configured for this port. This object is applicable to inter switch link ports.
FCB fcIfCapOsmRxBbCreditDefault	1.3.6.1.4.1.9.9.289.1.1.11.1.4	FcBbCredit	read-only	The default receive buffer-to-buffer credits if the port is operating in Fx mode.
FCB fcIfCapOsmRxBbCreditMax	1.3.6.1.4.1.9.9.289.1.1.11.1.2	FcBbCredit	read-only	The maximum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx mode. .
FCB fcIfCapOsmRxBbCreditMin	1.3.6.1.4.1.9.9.289.1.1.11.1.3	FcBbCredit	read-only	The minimum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx mode.
T/F fcIfCapOsmRxBbCreditWriteable	1.3.6.1.4.1.9.9.289.1.1.11.1.1	TruthValue	read-only	The value indicating whether the port operating in over subscribed mode is capable of allowing the user to configure receive buffer to buffer credit. The values configured for the objects: fcIfAdminRxBbCredit, fcIfAdminRxBbCreditModeISL, fcIfAdminRxBbCreditModeFx will take effect only if the value of this object is true(1), otherwise the default values specified by the objects: fcIfCapOsmRxBbCreditDefault, fcIfCapOsmISLRxBbCreditDefault will stay in effect depending on the operating mode of the port.
FCP fcIfCapOsmRxPerfBufDefault	1.3.6.1.4.1.9.9.289.1.1.11.1.11	FcPerfBuffer	read-only	The default performance buffers if the port is operating in Fx mode. The object is applicable to ports operating in Fx mode.
FCP fcIfCapOsmRxPerfBufMax	1.3.6.1.4.1.9.9.289.1.1.11.1.9	FcPerfBuffer	read-only	The maximum number of performance buffers that can be configured for this port. The object is applicable to ports operating in Fx mode.
FCP fcIfCapOsmRxPerfBufMin	1.3.6.1.4.1.9.9.289.1.1.11.1.10	FcPerfBuffer	read-only	The minimum number of performance buffers that can be configured for this port. The object is applicable to ports operating in Fx mode.
T/F fcIfCapOsmRxPerfBufWriteable	1.3.6.1.4.1.9.9.289.1.1.11.1.8	TruthValue	read-only	The value indicating whether the port is capable of allowing the user to configure receive performance buffers. The values configured for the objects: fcIfAdminRxPerfBuffer will take effect only if the value of this object is true(1), otherwise the default values specified by the objects: fcIfCapOsmRxPerfBufDefault, fcIfCapOsmISLRxPerfBufDefault will stay in effect depending on the operating mode of the port.
fcIfCapOsmTable	1.3.6.1.4.1.9.9.289.1.1.11		not-accessible	This table contains, one entry for each FC-Port which is capable of operating in over subscription port rate mode. It contains information describing about what each FC-port is inherently capable of operating or supporting in over subscription mode. Entries in this table are created/deleted on an as-needed basis by the agent. NOTE: This table has objects which represent the characteristics of a physical port. Thus, Port Channel ports are not represented in this table.
FCB fcIfCapRxBbCreditDefault	1.3.6.1.4.1.9.9.289.1.1.7.1.15	FcBbCredit	read-only	The default receive buffer-to-buffer credits if the port is operating in Fx mode.
FCB fcIfCapRxBbCreditMax	1.3.6.1.4.1.9.9.289.1.1.7.1.3	FcBbCredit	read-only	The maximum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx mode.
FCB fcIfCapRxBbCreditMin	1.3.6.1.4.1.9.9.289.1.1.7.1.4	FcBbCredit	read-only	The minimum number of receive buffers the port hardware is capable of receiving from the attached Nx_Port. This object is applicable to ports operating in Fx mode.
T/F fcIfCapRxBbCreditWriteable	1.3.6.1.4.1.9.9.289.1.1.7.1.14	TruthValue	read-only	The value indicating whether the port is capable of allowing the user to configure receive buffer to buffer credit. The values configured for the objects: fcIfAdminRxBbCredit, fcIfAdminRxBbCreditModeISL, fcIfAdminRxBbCreditModeFx will take effect only if the value of this object is true(1), otherwise the default values specified by the objects: fcIfCapRxBbCreditDefault, fcIfCapISLRxBbCreditDefault will stay in effect depending on the operating mode of the port.
FCR fcIfCapRxDataFieldSizeMax	1.3.6.1.4.1.9.9.289.1.1.7.1.5	FcRxDataFieldSize	read-only	The maximum size in bytes of the Data Field in a frame that the FC-Port is capable of receiving from its attached FC-port.
FCR fcIfCapRxDataFieldSizeMin	1.3.6.1.4.1.9.9.289.1.1.7.1.6	FcRxDataFieldSize	read-only	The minimum size in bytes of the Data Field in a frame that the FC-Port is capable of receiving from its attached FC-port.
fcIfCapTable	1.3.6.1.4.1.9.9.289.1.1.7		not-accessible	This table contains, one entry for each FC-Port. It contains information describing about what each FC-port is inherently capable in its current configuration of operating or supporting. Entries in this table are created/deleted on an as-needed basis by the agent. This table shows the capability of this port hardware as currently configured. NOTE: This table has objects which represent the characteristics of a physical port. Thus, Port Channel ports are not represented in this table. The recommended method to get the current capability for the objects affected by the setting of fcIfPortRateMode is to inspect the relevant objects in whichever table corresponds to the value of fcIfPortRateMode. As a result, the relevant objects in this table have been deprecated.
fcIfCfAccountingEntry	1.3.6.1.4.1.9.9.289.1.2.4.1		not-accessible	An entry containing Class F accounting information for each xE_port.
fcIfCfAccountingGroup	1.3.6.1.4.1.9.9.289.2.2.10			A collection of objects providing class f accounting information of the ports.
fcIfCfAccountingTable	1.3.6.1.4.1.9.9.289.1.2.4		not-accessible	A table that contains, one entry for each Interconnect_Ports (xE_port, B_port) in the fabric element, including Port Channel ports. It contains Class F accounting information.
C32 fcIfCfDiscards	1.3.6.1.4.1.9.9.289.1.2.4.1.5	Counter32	read-only	The number of Class F frames discarded by this port.
C64 fcIfCfInFrames	1.3.6.1.4.1.9.9.289.1.2.4.1.1	Counter64	read-only	The number of Class F frames received by this port.
C64 fcIfCfInOctets	1.3.6.1.4.1.9.9.289.1.2.4.1.3	Counter64	read-only	The number of Class F frame octets, including the frame delimiters, received by this port from its attached Nx_Port.
C64 fcIfCfOutFrames	1.3.6.1.4.1.9.9.289.1.2.4.1.2	Counter64	read-only	The number of Class F frames transmitted by this port.
C64 fcIfCfOutOctets	1.3.6.1.4.1.9.9.289.1.2.4.1.4	Counter64	read-only	The number of Class F frame octets, including the frame delimiters, transmitted by this port to its a attached Nx_Port.
FCP fcIfConnectorType	1.3.6.1.4.1.9.9.289.1.1.2.1.18	FcPortModuleTypes	read-only	The module type of the port connector. This object refers to the hardware implementation of the port. It will be 'embedded' if the hardware equivalent to Gigabit interface card ( GBIC ) is part of the line card and is unremovable. It will be 'glm' if its a gigabit link module ( GLM ). A GLM has a different form factor than GBIC. GLM is not supported by our switch. It will be 'gbicWithSerialID' if the GBIC serial id can be read, else it will be 'gbicWithoutSerialID'. It will be 'sfpWithSerialID', if the small form factor ( SFP ) pluggable GBICs serial id can be read, else it will be 'sfpWithoutSerialID'. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value is instantiated but its value is irrelevant.
C64 fcIfCreditLoss	1.3.6.1.4.1.9.9.289.1.2.1.1.37	Counter64	read-only	The number of link reset has occurred due to unavailable credits from the peer side of the link.
FCB fcIfCurrRxBbCredit	1.3.6.1.4.1.9.9.289.1.2.5.1.1	FcBbCredit	read-only	The current value of receive buffer-to-buffer credits for this port.
FCB fcIfCurrTxBbCredit	1.3.6.1.4.1.9.9.289.1.2.5.1.2	FcBbCredit	read-only	The current value of transmit buffer-to-buffer credits for this port.
C32 fcIfDelimiterErrors	1.3.6.1.4.1.9.9.289.1.2.1.1.7	Counter32	read-only	The number of Delimiter Errors detected by the FC-Port.
C32 fcIfEISLFramesDiscard	1.3.6.1.4.1.9.9.289.1.2.1.1.29	Counter32	read-only	The number of Enhanced Inter Switch Link (EISL) frames discarded by the FC-port. EISL frames carry an EISL header containing VSAN among other information.
FCR fcIfElpClass2RxDataFieldSize	1.3.6.1.4.1.9.9.289.1.1.6.1.7	FcRxDataFieldSize	read-only	The Class 2 Receive Data Field Size of the peer Interconnect_Port. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the Interconnect_Port. This is meaningful only if Class 2 service has been agreed.
T/F fcIfElpClass2SeqDelivAgreed	1.3.6.1.4.1.9.9.289.1.1.6.1.6	TruthValue	read-only	The object indicating whether the local Interconnect_Port has agreed to support Class 2 sequential delivery during the Exchange Link Parameters Switch Fabric Internal Link Service request. This is meaningful only if Class 2 service has been agreed.
FCR fcIfElpClass3RxDataFieldSize	1.3.6.1.4.1.9.9.289.1.1.6.1.9	FcRxDataFieldSize	read-only	The Class 3 Receive Data Field Size of the peer Interconnect_Port. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the Interconnect_Port. This is meaningful only if Class 3 service has been agreed.
T/F fcIfElpClass3SeqDelivAgreed	1.3.6.1.4.1.9.9.289.1.1.6.1.8	TruthValue	read-only	The object indicating whether the local Interconnect_Port has agreed to support Class 3 sequential delivery during the Exchange Link Parameters Switch Fabric Internal Link Service request. This is meaningful only if Class 3 service has been agreed.
U32 fcIfElpClassFConcurrentSeq	1.3.6.1.4.1.9.9.289.1.1.6.1.12	Unsigned32	read-only	The object indicating the number of sequence status blocks provided by the Interconnect_Port supplying the parameters for tracking the progress of a sequence as a sequence recipient. The maximum number of concurrent sequences that can be specified is 255. A value of zero in this field is reserved.
U32 fcIfElpClassFEndToEndCredit	1.3.6.1.4.1.9.9.289.1.1.6.1.13	Unsigned32	read-only	The object indicating the maximum number of Class F data frames which can be transmitted by an Interconnect_Port without receipt of accompanying ACK or Link_Response frames. The minimum value of end-to-end credit is one. The end-to-end credit field specified is associated with the number of buffers available for holding the Data_Field of a Class F frame and processing the contents of that Data_Field by the Interconnect_Port supplying the parameters.
U32 fcIfElpClassFOpenSeq	1.3.6.1.4.1.9.9.289.1.1.6.1.14	Unsigned32	read-only	The value of the open sequences per exchange shall specify the maximum number of sequences that can be open at one time at the recipient between a pair of Interconnect_Ports for one exchange. This value is used for exchange and sequence tracking.
FCR fcIfElpClassFRxDataFieldSize	1.3.6.1.4.1.9.9.289.1.1.6.1.11	FcRxDataFieldSize	read-only	The Class F Receive Data Field Size of the peer Interconnect_Port. Class F service is always agreed between two Interconnect_Ports, and thus this object is always meaningful. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the Interconnect_Port.
T/F fcIfElpClassFXII	1.3.6.1.4.1.9.9.289.1.1.6.1.10	TruthValue	read-only	The object when true(1) indicates that the peer Interconnect_Port supplying this parameter requires that an interlock be used during X_ID assignment in Class F. This is meaningful only if Class F service has been agreed.
FCC fcIfElpCosSuppAgreed	1.3.6.1.4.1.9.9.289.1.1.6.1.5	FcClassOfServices	read-only	The object indicating the classes of services that the peer Interconnect_Port has requested the local Interconnect_Port to support and the local Interconnect_Port has granted the request.
fcIfElpEntry	1.3.6.1.4.1.9.9.289.1.1.6.1		not-accessible	An entry containing Exchange Link parameters established between the Interconnect_Port indicated by ifIndex and the peer Interconnect_Port indicated by fcIfElpNbrPortName.
C32 fcIfELPFailures	1.3.6.1.4.1.9.9.289.1.2.1.1.27	Counter32	read-only	The number of Exchange Link Parameters Switch Fabric Internal Link service request failures detected by the FC-Port. This object is applicable to only Interconnect_Port, which are E_Port or B_Port.
fcIfElpGroup	1.3.6.1.4.1.9.9.289.2.2.5			A collection of objects giving Exchange Link Parameters established between the 2 Interconnect_Ports.
FCN fcIfElpNbrNodeName	1.3.6.1.4.1.9.9.289.1.1.6.1.1	FcNameId	read-only	The node world wide name of the peer Node.
FCN fcIfElpNbrPortName	1.3.6.1.4.1.9.9.289.1.1.6.1.2	FcNameId	read-only	The port world wide name of the peer Interconnect_Port.
NTF fcIfElpReject	1.3.6.1.4.1.9.9.289.1.3.0.3			This notification is generated by the agent whenever this interface received a ELP request and rejected it.
I32 fcIfElpRejectReasonCode	1.3.6.1.4.1.9.9.289.1.1.9	Integer32	accessible-for-notify	The reason code for the ELP reject.
I32 fcIfElpRejectReasonCodeExpl	1.3.6.1.4.1.9.9.289.1.1.10	Integer32	accessible-for-notify	The reason code explanation for the ELP reject.
FCB fcIfElpRxBbCredit	1.3.6.1.4.1.9.9.289.1.1.6.1.3	FcBbCredit	read-only	The maximum number of receive buffers available for holding Class 2, Class 3, Class F frames received from the peer Interconnect_Port. It is for buffer-to-buffer flow control in the incoming direction from the peer Interconnect_Port to local Interconnect_Port. The buffer-to-buffer flow control mechanism is indicated in the respective fcIfBbCreditModel.
fcIfElpTable	1.3.6.1.4.1.9.9.289.1.1.6		not-accessible	This table contains, one entry for each local Interconnect_Port that has performed Exchange Link Parameters Switch Fabric Internal Link Service exchange with its peer Interconnect_Port. Each entry contains Exchange Link Parameters established from the most recent ELP exchange between the 2 Interconnect_Port. The agent creates and deletes each entry in this table. The agent creates an entry in this table on a successful completion of a ELP exchange. Similarly the agent deletes the entry when the port goes down. NOTE: Port Channel ports are not represented in this table.
FCB fcIfElpTxBbCredit	1.3.6.1.4.1.9.9.289.1.1.6.1.4	FcBbCredit	read-only	The total number of buffers available for holding Class 2, Class 3, Class F frames to be transmitted to the peer Interconnect_Port. It is for buffer-to-buffer flow control in the direction from the local Interconnect_Port to peer Interconnect_Port. The buffer-to-buffer flow control mechanism is indicated in the corresponding fcIfBbCreditModel.
fcIfEntry	1.3.6.1.4.1.9.9.289.1.1.2.1		not-accessible	Each entry contains FC-port configuration parameters and state information.
C32 fcIfEOFaFrames	1.3.6.1.4.1.9.9.289.1.2.1.1.23	Counter32	read-only	The number of frames received by FC-port with EOF aborts.
CIS fcIfePortCongestionDropTimeout	1.3.6.1.4.1.9.9.289.1.1.21	CiscoMilliSeconds	read-write	This object specifies the congestion drop timeout value in milliseconds for E Ports.
CIS fcIfePortSlowportMonitorTimeout	1.3.6.1.4.1.9.9.289.1.1.18	CiscoMilliSeconds	read-write	This object specifies the hardware slowport monitor timeout value in milliseconds for E Ports.
fcIfErrorEntry	1.3.6.1.4.1.9.9.289.1.2.1.1		not-accessible	Each entry contains error counters of a fabric channel port.
fcIfErrorGroup	1.3.6.1.4.1.9.9.289.2.2.7			A collection of objects providing errors of the ports.
fcIfErrorGroupRev1	1.3.6.1.4.1.9.9.289.2.2.16			A collection of objects providing errors of the ports.
fcIfErrorGroupRev2	1.3.6.1.4.1.9.9.289.2.2.31			A collection of objects providing errors of the ports.
fcIfErrorGroupRev3	1.3.6.1.4.1.9.9.289.2.2.32			A collection of objects providing errors of the ports.
fcIfErrorGroupRev4	1.3.6.1.4.1.9.9.289.2.2.34			A collection of objects providing errors of the ports.
fcIfErrorGroupRev5	1.3.6.1.4.1.9.9.289.2.2.36			A collection of objects providing slowport statistics. fcIfSlowPortCount represents number of times slowport condition(TX credits zero)is detected for the configured slowport monitor timeout represented by fcIfePortSlowportMonitorTimeout or fcIffPortSlowportMonitorTimeout. fcIfSlowportOperDelay provides maximum operational delay experienced by the port.
fcIfErrorGroupRev6	1.3.6.1.4.1.9.9.289.2.2.39			Group providing information about port state change count.
fcIfErrorGroupRev7	1.3.6.1.4.1.9.9.289.2.2.41			Group providing information about 64-bit Transmit wait count.
fcIfErrorTable	1.3.6.1.4.1.9.9.289.1.2.1		not-accessible	This table contains, one entry for each fabric channel port( including any Port Channel ports ). It contains counters that record the errors detected. This table is an extension to interfaces group defined in IF-MIB. It contains additional errors specific to this device.
NUM fcIfFcTunnelIfIndex	1.3.6.1.4.1.9.9.289.1.1.2.1.37	InterfaceIndexOrZero	read-write	This object specifies the ifIndex of a FC tunnel that represents a logical Fibre Channel data path between a source switch and destination switch. RSPAN uses a special FC tunnel that originates at the ST port in the source switch and terminates at the SD port in the destination switch. The FC tunnel must be first bound to an ST port in the source switch and then mapped to an SD port in the destination switch for RSPAN feature configuration, which enables monitoring traffic from a remote switch. A value of zero indicates that no FC tunnel is mapped to a ST port. GLOSSARY: SPAN: Switch Port Analyzer (SPAN) is a feature that enables user to analyze network traffic in a switched network using network analyzer attached to a switch port. RSPAN: Remote SPAN that enables monitoring of traffic from remote switches. FC tunnel: An FC tunnel is a logical data path between a source switch and destination switch. SPAN tunnel (ST) port: The ST port is used to forward traffic to FC tunnel. SPAN destination (SD) port: The SD port is used to forward traffic to an Analyzer for monitoring purposes.
C64 fcIfFECCorrectedBlks	1.3.6.1.4.1.9.9.289.1.2.1.1.42	Counter64	read-only	The number of blocks corrected by FEC decoder.
C64 fcIfFECUncorrectedBlks	1.3.6.1.4.1.9.9.289.1.2.1.1.43	Counter64	read-only	The number of blocks FEC decoder was unable to correct.
U32 fcIfFlapCtrlConfigDuration	1.3.6.1.4.1.9.9.289.1.1.17.1.3	Unsigned32	read-write	This object specifies the time duration in which the port is allowed to toggle as many as the number of times given by fcIfFlapCtrlConfigNumFlaps. When fcIfFlapCtrlConfigEnable is 'false', this object does not take effect and its value cannot be changed.
T/F fcIfFlapCtrlConfigEnable	1.3.6.1.4.1.9.9.289.1.1.17.1.2	TruthValue	read-write	This object specifies if an interface can be stopped from toggling between up and down states or allowed to toggle continuously. If 'true', the interface will be stopped from toggling between up and down states. If 'false', the interface will be allowed to toggle continuously.
fcIfFlapCtrlConfigEntry	1.3.6.1.4.1.9.9.289.1.1.17.1		not-accessible	An entry in the fcIfFlapCtrlConfigTable.
fcIfFlapCtrlConfigGroup	1.3.6.1.4.1.9.9.289.2.2.28			A collection of objects which provides toggle control information for fibre channel interface.
U32 fcIfFlapCtrlConfigNumFlaps	1.3.6.1.4.1.9.9.289.1.1.17.1.4	Unsigned32	read-write	This object specifies the number of times a port can flap in the duration given by fcIfFlapCtrlConfigDuration. When fcIfFlapCtrlConfigEnable is 'false', this object does not take effect and its value cannot be changed.
INT fcIfFlapCtrlConfigReason	1.3.6.1.4.1.9.9.289.1.1.17.1.1	INTEGER	not-accessible	This object indicates the reason for which a port can be allowed to toggle between up and down states. linkFailure (1) - physical link failure. trustSecViolation (2) - Cisco Trusted Security violation. bitErrorRate (3) - bit error rate threshold exceeded. signalLoss (4) - link failure due to loss of signal. syncLoss (5) - link failure due to loss of sync. linkReset (6) - link failure due to link reset. creditLoss (7) - link failure due to excessive credit loss indications.
fcIfFlapCtrlConfigTable	1.3.6.1.4.1.9.9.289.1.1.17		not-accessible	In certain scenarios, when an interface in a system transitions to a down state due to a particular reason, it is likely for the interface to keep flapping between up and down states continuously. The objects in each entry of this table help in controlling such behaviour on an interface by stopping such frequent transitions and holding the interface in down state, if a stipulated number of such toggles happen in a given duration, as described in the objects. Per each reason for which the interface flaps, an entry in this table can be used to configure the following: whether or not the flapping should be controlled on the interface, the allowed number of flaps and the allowed duration before the interface is held in down state.
fcIfFLoginEntry	1.3.6.1.4.1.9.9.289.1.1.5.1		not-accessible	An entry containing service parameters established by a successful Fabric Login to the port indicated by ifIndex.
fcIfFLoginTable	1.3.6.1.4.1.9.9.289.1.1.5		not-accessible	This table contains, one entry for each Nx_Port attached to a particular FC-port in this VSAN in the Fabric element. Each entry contains services parameters established from the most recent Fabric Login, explicit or implicit. In case of private devices attached to port, the fabric switch does the login on behalf of the private device. The fabric switch creates or deletes an entry in this table. Note: An FC-port may have one or more Nx_Port logged-in to it.
CIS fcIffPortCongestionDropTimeout	1.3.6.1.4.1.9.9.289.1.1.22	CiscoMilliSeconds	read-write	This object specifies the congestion drop timeout value in milliseconds for F Ports.
CIS fcIffPortNoCreditDropTimeout	1.3.6.1.4.1.9.9.289.1.1.20	CiscoMilliSeconds	read-write	This object specifies the no-credit drop timeout value in milliseconds for F Ports.
CIS fcIffPortSlowportMonitorTimeout	1.3.6.1.4.1.9.9.289.1.1.19	CiscoMilliSeconds	read-write	This object specifies the hardware slowport monitor timeout value in milliseconds for F Ports.
C32 fcIfFragFrames	1.3.6.1.4.1.9.9.289.1.2.1.1.22	Counter32	read-only	The number of fragmented frames received by the FC-port.
C32 fcIfFramesDiscard	1.3.6.1.4.1.9.9.289.1.2.1.1.26	Counter32	read-only	The number of frames discarded by the FC-port.
C32 fcIfFramesTooLong	1.3.6.1.4.1.9.9.289.1.2.1.1.16	Counter32	read-only	The number of frames received by the FC-port where the frame length was greater than what was agreed to in FLOGI/PLOGI. This could be caused by losing the end of frame delimiter.
C32 fcIfFramesTooShort	1.3.6.1.4.1.9.9.289.1.2.1.1.17	Counter32	read-only	The number of frames received by the FC-port where the frame length was less than the minimum indicated by the frame header (normally 24 bytes), but it could be more if the DFCTL field indicates an optional header should be present.
C32 fcIfFramingErrorFrames	1.3.6.1.4.1.9.9.289.1.2.1.1.30	Counter32	read-only	The number of framing errors. This denotes that the FC-port detected an inconsistency of frame structure.
FCP fcIfGigConnectorType	1.3.6.1.4.1.9.9.289.1.1.14.1.4	FcPortModuleTypes	read-only	The module type of the port connector. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value is instantiated but its value is irrelevant.
INT fcIfGigEAdminSpeed	1.3.6.1.4.1.9.9.289.1.1.14.1.5	INTEGER	read-write	This object specifies the configured speed of IPStorage port. 'notApplicable' - The read-only value 'notApplicable' indicates that the speed change is not applicable. 'oneGigSpeed' - The IPStorage port is configured as 1G. 'tenGigSpeed' - The IPStorage port is configured as 10G. 'twentyfiveGigSpeed' - The IPStorage port is configured as 25G. 'fortyGigSpeed' - The IPStorage port is configured as 40G.
INT fcIfGigEAutoNegotiate	1.3.6.1.4.1.9.9.289.1.1.14.1.2	INTEGER	read-write	This object Indicates whether auto-negotiation (of speed and duplex mode) should be used on this interface.
T/F fcIfGigEBeaconMode	1.3.6.1.4.1.9.9.289.1.1.14.1.3	TruthValue	read-write	In Beacon mode, an interface LED is put into flashing mode for easy identification of a particular interface. The Beacon mode configured by the user. If 'true', the Beacon mode is enabled. If 'false', the beacon mode is disabled.
fcIfGigEEntry	1.3.6.1.4.1.9.9.289.1.1.14.1		not-accessible	Each entry contains GigE port configuration and state information.
fcIfGigEinfoExtGroup	1.3.6.1.4.1.9.9.289.2.2.22			A collection objects giving providing information about GigE interfaces.
fcIfGigEinfoExtGroupRev1	1.3.6.1.4.1.9.9.289.2.2.30			A collection objects giving providing information about GigE interfaces.
fcIfGigEinfoExtGroupRev2	1.3.6.1.4.1.9.9.289.2.2.37			Group providing information about GigE interfaces Admin Port Speed.
fcIfGigEinfoExtGroupRev3	1.3.6.1.4.1.9.9.289.2.2.38			Group providing information about GigE interface operational status cause.
fcIfGigEinfoExtGroupRev4	1.3.6.1.4.1.9.9.289.2.2.40			Group providing information about service state of GigE interfaces.
fcIfGigEInfoGroup	1.3.6.1.4.1.9.9.289.2.2.19			A collection objects to provide port channel information for gigabit ethernet interfaces.
FCI fcIfGigEOperStatusCause	1.3.6.1.4.1.9.9.289.1.1.14.1.6	FcIfOperStatusReason	read-only	This object indicates the cause of the current operational state of the ipstorage port. The current operational state of the port is shown by the 'ifOperStatus' defined in IF-MIB. This object will show 'none(2)' for all the 'ifOperStatus' values except for 'down(2)'. It will show one of the values from the 'FcIfOperStatusReason' textual convention if 'ifOperStatus' is 'down(2)'. It will show other(1) if the operational status cause is not from one defined in 'FcIfOperStatusReason'. This object will also be an additional varbind sent in the linkDown notification ( defined in IF-MIB ) in addition to the varbinds defined for this notification.
NUM fcIfGigEPortChannelIfIndex	1.3.6.1.4.1.9.9.289.1.1.14.1.1	InterfaceIndexOrZero	read-only	The ifIndex of the ether channel port this GigE port belongs to. A value of zero indicates that this GigE port is not part of any port channel. For port channel port this object will have the ifIndex of the port channel port itself.
FCI fcIfGigEServiceState	1.3.6.1.4.1.9.9.289.1.1.14.1.7	FcIfServiceStateType	read-write	This object idicates the current operational state of the GigE interface.
fcIfGigETable	1.3.6.1.4.1.9.9.289.1.1.14		not-accessible	This table contains one entry per fibre channel switch Gigabit Ethernet (GigE) interface. This table also provides an easy way to find out whether a GigE interface is part of an port channel or not. The table is indexed by the 'ifIndex' of the GigE port in the fiber channel switch.
fcIfGroup	1.3.6.1.4.1.9.9.289.2.2.2			A collection objects giving port information.
fcIfGroupRev1	1.3.6.1.4.1.9.9.289.2.2.12			A collection objects giving port information.
fcIfGroupRev2	1.3.6.1.4.1.9.9.289.2.2.14			A collection objects giving port information.
fcIfGroupRev3	1.3.6.1.4.1.9.9.289.2.2.17			A collection objects giving port information.
fcIfGroupRev4	1.3.6.1.4.1.9.9.289.2.2.33			A collection objects giving port information.
fcIfGroupRev5	1.3.6.1.4.1.9.9.289.2.2.42			A collection objects giving port information.
MIC fcIfHoldTime	1.3.6.1.4.1.9.9.289.1.1.2.1.16	MicroSeconds	read-only	The maximum time that the FC-Port shall hold a frame in the transmitter buffer before discarding it, if it is unable to deliver the frame. The value 0 in this object means the frame will be discarded immediately if the port is unable to deliver the frame. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value is instantiated but its value is irrelevant.
fcIfInfoGroup	1.3.6.1.4.1.9.9.289.2.2.21			A collection of objects providing information what the port is capable of supporting.
fcIfInfoPortGroup	1.3.6.1.4.1.9.9.289.2.2.25			A collection objects giving port information.
C32 fcIfInvalidCrcs	1.3.6.1.4.1.9.9.289.1.2.1.1.6	Counter32	read-only	The number of invalid CRCs detected by the FC-Port. Loop ports should not count CRC errors passing through when monitoring.
C32 fcIfInvalidTxWords	1.3.6.1.4.1.9.9.289.1.2.1.1.5	Counter32	read-only	The number of invalid transmission words detected by the FC-Port.
T/F fcIfIsAdminRxBbCreditExtendedCapable	1.3.6.1.4.1.9.9.289.1.1.7.1.22	TruthValue	read-only	Indicates whether extended buffer-to-buffer credit feature can be enabled on a given interface. 'true' : capable of changing the extended buffer-to-buffer credits on the interface. The user can configure the object fcIfAdminRxBbCreditExtended on this interface. 'false' : not capable of changing the extended buffer-to-buffer credits on the interface. The user cannot configure the object fcIfAdminRxBbCreditExtended on this interface.
T/F fcIfIsPortRateModeCapable	1.3.6.1.4.1.9.9.289.1.1.7.1.21	TruthValue	read-only	Indicates whether this interface is capable of being configured in either of 'dedicated' or 'shared' port rate modes. 'true' : capable of changing the port rate mode of the interface. The user can configure the object fcIfAdminPortRateMode. 'false' : not capable of changing the port rate mode of the interface. The user cannot configure the object fcIfAdminPortRateMode.
T/F fcIfIsServiceStateCapable	1.3.6.1.4.1.9.9.289.1.1.7.1.20	TruthValue	read-only	Indicates whether this interface is capable of handling service state change. 'true' : capable of changing the service state of the interface. This means that the user can configure the object fcIfServiceState on this interface. 'false' : not capable of a change in service state of the interface. The user cannot configure the object fcIfServiceState on this interface.
C32 fcIfJabberFramesIn	1.3.6.1.4.1.9.9.289.1.2.1.1.14	Counter32	read-only	The number of frames received by the FC-port that are longer than a maximum frame length and also have a CRC error.
C32 fcIfLinkFailuresEx	1.3.6.1.4.1.9.9.289.1.2.1.1.1	Counter32	read-only	The number of link failures detected by the FC-Port.
C32 fcIfLinkResetIns	1.3.6.1.4.1.9.9.289.1.2.1.1.9	Counter32	read-only	The number of link reset protocol errors received by the FC-Port from the attached FC-port.
C32 fcIfLinkResetOuts	1.3.6.1.4.1.9.9.289.1.2.1.1.10	Counter32	read-only	The number of link reset protocol errors issued by the FC-Port to the attached FC-Port.
C32 fcIfLipF8In	1.3.6.1.4.1.9.9.289.1.2.1.1.31	Counter32	read-only	The number of 'F8' (LIP(F8,x)) type of Loop failures - Loop Initialization Primitive Sequence (LIP) errors received by the FC-Port from the attached FC-port.
C32 fcIfLipF8Out	1.3.6.1.4.1.9.9.289.1.2.1.1.32	Counter32	read-only	The number of 'F8' (LIP(F8,x)) type of Loop failures - Loop Initialization Primitive Sequence (LIP) errors issued by the FC-Port to the attached FC-Port.
U32 fcIfLoginEntryCount	1.3.6.1.4.1.9.9.289.1.1.4	Unsigned32	read-only	The number of login entries in fcIfFLoginTable.
fcIfLoginGroup	1.3.6.1.4.1.9.9.289.2.2.4			A collection of objects giving Fabric Login info for Fx_Port.
C32 fcIfLRRIn	1.3.6.1.4.1.9.9.289.1.2.1.1.18	Counter32	read-only	The number of Link reset responses received by the FC-port.
C32 fcIfLRROut	1.3.6.1.4.1.9.9.289.1.2.1.1.19	Counter32	read-only	The number of Link reset responses transmitted by the FC-port.
INT fcIfModuleBandwidthFairnessConfig	1.3.6.1.4.1.9.9.289.1.1.15.1.2	INTEGER	read-write	This object helps the user to control bandwidth fairness on modules that support it. enable(1) - Enables the bandwidth fairness disable(2) - Disables the bandwidth fairness notApplicable(3) - This value is read-only and is always returned for module which does not support this configuration By default, bandwidth fairness is enabled for a module. If the user configures this object to disable (2), fair bandwidth provisioning will not be guaranteed for interfaces with fcIfPortRadeMode equal to 'dedicated'.
INT fcIfModuleBandwidthFairnessOper	1.3.6.1.4.1.9.9.289.1.1.15.1.3	INTEGER	read-only	The operational status of bandwidth fairness on the module. enabled(1) - Bandwidth fairness is enabled on the module disabled(2) - Bandwidth fairness is disabled on the module notApplicable(3) - This value is read-only and is always returned for module which does not support this configuration
fcIfModuleEntry	1.3.6.1.4.1.9.9.289.1.1.15.1		not-accessible	An entry in fcIfModuleTable. Each entry represents the module specific attributes.
fcIfModuleGroup	1.3.6.1.4.1.9.9.289.2.2.26			A collection objects giving module information.
fcIfModuleGroupRev1	1.3.6.1.4.1.9.9.289.2.2.29			A collection objects giving module information.
INT fcIfModuleOverSubscriptionRatioConfig	1.3.6.1.4.1.9.9.289.1.1.15.1.1	INTEGER	read-write	This object helps the user to control the restriction on oversubscription ratio on modules that support it. enable(1) - Enables the restriction on oversubscription ratio disable(2) - Disables the restriction on oversubscription ratio By default, the restriction on oversubscription ratio is enabled. If the user configures this object to disable (2), all the interfaces on the module are capable of operating at maximum admin speed, given by fcIfAdminSpeed, regardless of the available bandwidth.
fcIfModuleTable	1.3.6.1.4.1.9.9.289.1.1.15		not-accessible	This table is used for configuring the module specific features for Fibre Channel modules (or whatever equivalent).
INT fcIfModuleXcvrFrequencyConfig	1.3.6.1.4.1.9.9.289.1.1.15.1.4	INTEGER	read-write	This object specifies the transceiver frequency of this module. notApplicable(1) - This value is read-only and is always returned for module which does not support this configuration. xcvrFreqX2FC(2) - Sets the object to 10G FC transceiver frequency. xcvrFreqX2Eth(3) - Sets the object to 10G Ethernet transceiver frequency.
C32 fcIfNonLipF8In	1.3.6.1.4.1.9.9.289.1.2.1.1.33	Counter32	read-only	The number of Non 'F8' (LIP(F8,x)) type of Loop failures - Loop Initialization Primitive Sequence (LIP) errors received by the FC-Port from the attached FC-port.
C32 fcIfNonLipF8Out	1.3.6.1.4.1.9.9.289.1.2.1.1.34	Counter32	read-only	The number of Non 'F8' (LIP(F8,x)) type of Loop failures - Loop Initialization Primitive Sequence (LIP) errors issued by the FC-Port to the attached FC-Port.
C32 fcIfNOSIn	1.3.6.1.4.1.9.9.289.1.2.1.1.20	Counter32	read-only	The number of non-operational sequences received by the FC-port.
C32 fcIfNOSOut	1.3.6.1.4.1.9.9.289.1.2.1.1.21	Counter32	read-only	The number of non-operational sequences transmitted by the FC-port.
fcIfNotificationGroup	1.3.6.1.4.1.9.9.289.2.2.11			A collection of notifications for monitoring fibre channel interfaces.
FCR fcIfNxClass2RxDataFieldSize	1.3.6.1.4.1.9.9.289.1.1.5.1.8	FcRxDataFieldSize	read-only	The Class 2 Receive Data Field Size of the logged-in Nx_Port. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the Nx_Port.
T/F fcIfNxClass2SeqDelivAgreed	1.3.6.1.4.1.9.9.289.1.1.5.1.11	TruthValue	read-only	The object indicating whether the FC-Port has agreed to support Class 2 sequential delivery during the Fabric Login. This is meaningful only if Class 2 service has been agreed. This object is applicable only to Fx_Ports.
FCR fcIfNxClass3RxDataFieldSize	1.3.6.1.4.1.9.9.289.1.1.5.1.9	FcRxDataFieldSize	read-only	The Class 3 Receive Data Field Size of the logged-in Nx_Port. This object specifies the largest Data Field Size for an FT_1 frame that can be received by the Nx_Port.
T/F fcIfNxClass3SeqDelivAgreed	1.3.6.1.4.1.9.9.289.1.1.5.1.12	TruthValue	read-only	The flag indicating whether the Fx_Port has agreed to support Class 3 sequential delivery during the Fabric Login. This is meaningful only if Class 3 service has been agreed. This object is applicable only to Fx_Ports.
FCC fcIfNxCosSuppAgreed	1.3.6.1.4.1.9.9.289.1.1.5.1.10	FcClassOfServices	read-only	The object indicating the classes of services that the logged-in Nx_Port has requested the FC-Port to support and the FC-Port has granted the request.
FCP fcIfNxFcphVersionAgreed	1.3.6.1.4.1.9.9.289.1.1.5.1.5	FcphVersion	read-only	The version of FC-PH that the Fx_Port has agreed to support from the Fabric Login.
U32 fcIfNxLoginIndex	1.3.6.1.4.1.9.9.289.1.1.5.1.1	Unsigned32	not-accessible	An arbitrary value identifying the associated Nx_Port in the attachment for which the entry contains information.
ADR fcIfNxPortAddress	1.3.6.1.4.1.9.9.289.1.1.5.1.4	FcAddressId	read-only	The address identifier that has been assigned to the logged-in Nx_Port.
FCN fcIfNxPortName	1.3.6.1.4.1.9.9.289.1.1.5.1.3	FcNameId	read-only	The world wide name of the logged-in Nx_Port.
FCN fcIfNxPortNodeName	1.3.6.1.4.1.9.9.289.1.1.5.1.2	FcNameId	read-only	The world wide name of the Remote Node the logged-in Nx_Port belongs to.
FCB fcIfNxRxBbCredit	1.3.6.1.4.1.9.9.289.1.1.5.1.6	FcBbCredit	read-only	The maximum number of receive buffers available for holding Class 2, Class 3 received from the logged-in Nx_Port. It is for buffer-to-buffer flow control in the incoming direction from the logged-in Nx_Port to FC-port.
FCB fcIfNxTxBbCredit	1.3.6.1.4.1.9.9.289.1.1.5.1.7	FcBbCredit	read-only	The total number of buffers available for holding Class 2, Class 3 frames to be transmitted to the logged-in Nx_Port. It is for buffer-to-buffer flow control in the direction from FC-Port to Nx_Port. The buffer-to-buffer flow control mechanism is indicated in the respective fcIfBbCreditModel.
C32 fcIfOlsIns	1.3.6.1.4.1.9.9.289.1.2.1.1.11	Counter32	read-only	The number of Offline Sequence errors received by the FC-Port.
C32 fcIfOlsOuts	1.3.6.1.4.1.9.9.289.1.2.1.1.12	Counter32	read-only	The number of Offline Sequence errors issued by the FC-Port.
INT fcIfOperFECState	1.3.6.1.4.1.9.9.289.1.1.2.1.42	INTEGER	read-only	The current operating FEC state of the port.The value is down(2) by default. If fcIfAdminFECState is up(1) for a physical port, the port negotiates and converts the link into operational FEC up only if the neighboring port fcIfAdminFECState is up(1).
INT fcIfOperFecTtsState	1.3.6.1.4.1.9.9.289.1.1.2.1.44	INTEGER	read-only	The current operating FEC TTS state of the port. The value is down by default. For fcIfOperFecTtsState to come up, both fcIfAdminFECState and fcIfAdminFecTtsState should be configured as up.
FCP fcIfOperMode	1.3.6.1.4.1.9.9.289.1.1.2.1.3	FcPortTypes	read-only	The current operating mode of the port. This object will also be an additional varbind sent in the linkUp notification ( defined in IF-MIB ) in addition to the varbinds defined for this notification.
FCB fcIfOperRxBbCredit	1.3.6.1.4.1.9.9.289.1.1.2.1.27	FcBbCredit	read-only	The receive buffer-to-buffer credits configured for the operational port mode.
FCP fcIfOperRxPerfBuffer	1.3.6.1.4.1.9.9.289.1.1.2.1.33	FcPerfBuffer	read-only	The performance buffers presently operational on this port.
FCI fcIfOperStatusCause	1.3.6.1.4.1.9.9.289.1.1.2.1.7	FcIfOperStatusReason	read-only	The cause of current operational state of the port. The current operational state of the port is shown by the 'ifOperStatus' defined in IF-MIB. This object will show 'none(2)' for all the 'ifOperStatus' values except for 'down(2)'. It will show one of the values from the 'FcIfOperStatusReason' textual convention if 'ifOperStatus' is 'down(2)'. It will show other(1) if the operational status cause is not from one defined in 'FcIfOperStatusReason'. This object will also be an additional varbind sent in the linkDown notification ( defined in IF-MIB ) in addition to the varbinds defined for this notification.
STR fcIfOperStatusCauseDescr	1.3.6.1.4.1.9.9.289.1.1.2.1.8	SnmpAdminString	read-only	The description for the cause of current operational state of the port, shown by the object 'fcIfOperStatusCause'.
INT fcIfOperTrunkMode	1.3.6.1.4.1.9.9.289.1.1.2.1.10	INTEGER	read-only	The current trunking mode of the port.
C64 fcIfOutDiscards	1.3.6.1.4.1.9.9.289.1.2.1.1.36	Counter64	read-only	The total number of packets that are discarded in the egress side of the FC-port.
STR fcIfPartNumber	1.3.6.1.4.1.9.9.289.1.1.2.1.23	SnmpAdminString	read-only	The connector unit ( e.g., for a GBIC ) part number. If this is not applicable it returns a zero-length string. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value is instantiated but its value is irrelevant.
NUM fcIfPortChannelIfIndex	1.3.6.1.4.1.9.9.289.1.1.2.1.6	InterfaceIndexOrZero	read-only	The ifIndex of the port channel port this port belongs to. A value of zero indicates that this port is not part of any port channel. For port channel port this object will have the ifIndex of the port channel port itself.
T/F fcIfPortInitStatus	1.3.6.1.4.1.9.9.289.1.1.2.1.35	TruthValue	read-only	If 'true', this port successfully completed a link initialization or there was an error during link initialization. If 'false', this port did not perform successful link initialization since it was brought down by the user or switch was powered up.
INT fcIfPortRateMode	1.3.6.1.4.1.9.9.289.1.1.2.1.31	INTEGER	read-write	The rate of data traffic supported by this port. 'dedicated' - this interface is operating in dedicated rate mode. In dedicated rate mode each interface has an allocated fabric bandwidth to sustain line rate traffic at the maximum configured operating speed. 'shared' - this interface is operating in over subscription mode. In over subscription mode the available fabric bandwidth of a link is shared by more than one interface, so that multiple front panel ports share the same link internally to the switch fabric. For modules that are capable of switching between 'dedicated' and 'shared' modes, certain restrictions apply based on the available bandwidth and speed. The keywords 'osm' and 'shared', 'frm' and 'dedicated' are interchangeable.
INT fcIfPortType	1.3.6.1.4.1.9.9.289.1.1.2.1.40	INTEGER	read-only	Indicates whether this interface is internal orexternal interface on the chassis. internal(1) - This type of interface is not accessible via an externally-mounted connector on the device external(2) - This type of interface is accessible via an externally-mounted connector on the device Except on certain platforms, the interfaces are usually of the fcIfPortType 'external'.
C32 fcIfPrimSeqProtoErrors	1.3.6.1.4.1.9.9.289.1.2.1.1.4	Counter32	read-only	The number of primitive sequence protocol errors detected by the FC-Port.
STR fcIfRevision	1.3.6.1.4.1.9.9.289.1.1.2.1.20	SnmpAdminString	read-only	The port revision of the connector unit (e.g., for a GBIC). If this is not applicable it returns a zero-length string. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value is instantiated but its value is irrelevant.
fcIfRNIDInfoEntry	1.3.6.1.4.1.9.9.289.1.1.13.1		not-accessible	Each entry provides node identification data of the peer. This data is got through performing request-node-identification-data(RNID) extended link service. The table would have entry for each port, identified by ifIndex, on this VSAN, identified by vsanIndex. This table would hold entries only for physical FC ports, FC port channel ports and FCIP ports.
fcIfRNIDInfoGroup	1.3.6.1.4.1.9.9.289.2.2.18			A collection objects giving the peer node identification data.
STR fcIfRNIDInfoManufacturer	1.3.6.1.4.1.9.9.289.1.1.13.1.4	SnmpAdminString	read-only	The name of the the company that manufactured the peer node. For example the Manufacturer info could be HTC.
STR fcIfRNIDInfoModelNumber	1.3.6.1.4.1.9.9.289.1.1.13.1.3	SnmpAdminString	read-only	The model number of the peer node. For example the model number could be F20.
STR fcIfRNIDInfoPlantOfMfg	1.3.6.1.4.1.9.9.289.1.1.13.1.5	SnmpAdminString	read-only	The plant code that identifies the plant of manufacture of the peer node. For example the plant code of manufacture could be 00.
I32 fcIfRNIDInfoPortId	1.3.6.1.4.1.9.9.289.1.1.13.1.8	Integer32	read-only	The identifier of the port in the peer node connected to this port. If the peer node is a channel, as described by the instance of fcIfRNIDInfoUnitType, then fcIfRNIDInfoPortId will be the CHPID (Channel Path Identifier) of the channel path that contains the port in the peer node connected to this port. If the peer node is controlUnit, then fcIfRNIDInfoPortId will be 0. If the peer node is fabric, then fcIfRNIDInfoPortId will be port address of the port in peer node connected to this port.
STR fcIfRNIDInfoSerialNumber	1.3.6.1.4.1.9.9.289.1.1.13.1.6	SnmpAdminString	read-only	The sequence number assigned to the peer node during manufacturing. For example the serial number could be 000000023053.
INT fcIfRNIDInfoStatus	1.3.6.1.4.1.9.9.289.1.1.13.1.1	INTEGER	read-write	This object specifies the status of the row, is valid, invalid or old. The only value that can be assigned by the Network Management System(NMS) is invalid(2). The NMS cannot set this object to any other value (i.e valid (1) or old(3) ).
fcIfRNIDInfoTable	1.3.6.1.4.1.9.9.289.1.1.13		not-accessible	A table listing the peer node identification data per port per VSAN.
STR fcIfRNIDInfoTypeNumber	1.3.6.1.4.1.9.9.289.1.1.13.1.2	SnmpAdminString	read-only	The type number of the peer node. For example the type number could be 002105.
INT fcIfRNIDInfoUnitType	1.3.6.1.4.1.9.9.289.1.1.13.1.7	INTEGER	read-only	The type of the peer node that this port is communicating. channel - Host controlUnit - Disk fabric - Another SAN switch unknown - if fcIfRNIDInfoStatus is 'invalid' this would be unknown.
C32 fcIfRuntFramesIn	1.3.6.1.4.1.9.9.289.1.2.1.1.13	Counter32	read-only	The number of frames received by the FC-port that are shorter than the minimum allowable frame length regardless if the CRC is good or not.
FCR fcIfRxDataFieldSize	1.3.6.1.4.1.9.9.289.1.1.2.1.28	FcRxDataFieldSize	read-write	The largest Data_Field size for an FT_1 frame that can be received by this port.
STR fcIfSerialNo	1.3.6.1.4.1.9.9.289.1.1.2.1.19	SnmpAdminString	read-only	The serial number of the connector unit ( e.g., for a GBIC ). If this is not applicable, return a zero-length string. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value is instantiated but its value is irrelevant.
FCI fcIfServiceState	1.3.6.1.4.1.9.9.289.1.1.2.1.38	FcIfServiceStateType	read-write	The service state of the interface. Some but not all interfaces, e.g., those on hardware modules with a capability of supporting shared resources, can have their state changed to 'outOfService'. Examples of such shared resources include speed/bandwidth and buffer memory. Shared resources include the values of the following objects: fcIfAdminSpeed, fcIfAdminMode, fcIfPortRateMode, fcIfAdminRxBbCredit, fcIfAdminRxBbCreditModeISL, fcIfAdminRxBbCreditModeFx, fcIfAdminRxBbCreditExtended, fcIfAdminRxPerfBuffer. When an attempt is made to change a particular interface's value for this object to 'outOfService': - if the interface's ifAdminStatus is 'up' or if the interface is a part of a Port channel, then the change to the value of this object is rejected. - if the interface's value of this object is successfully changed to 'outOfService', then each and every user-configured parameter value of the above-listed shared resource objects for that interface is set to its default value. When an interface is in the 'outOfService' state then: - the interface is not operational and no packets can be passed, - the interface's shared resource objects can not be configured to non-default values, - the interface cannot be added to a port channel. - the interface cannot be involved in a port swap (using cficonPortSwapTable in CISCO-FICON-MIB). - ifAdminStatus in IF-MIB cannot be changed to 'up' state. - other interface objects are not affected. Changing the value of this object on one interface to 'outOfService' does not affect the functionality of any other interface. When an attempt is made to change a particular interface's value for this object to 'inService', the attempt is rejected if necessary shared resources are unavailable.
STR fcIfSFPSerialIDData	1.3.6.1.4.1.9.9.289.1.1.2.1.22	SnmpAdminString	read-only	The connector unit ( e.g., for a GBIC ) Serial ID data. If this is not applicable it returns a zero-length string. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value is instantiated but its value is irrelevant.
C32 fcIfSigLosses	1.3.6.1.4.1.9.9.289.1.2.1.1.3	Counter32	read-only	The number of signal losses detected by the FC-Port.
C64 fcIfSlowPortCount	1.3.6.1.4.1.9.9.289.1.2.1.1.44	Counter64	read-only	This object indicates number of times slowport event(transmit credits not available) condition detected for the timeout value configured in fcIffPortSlowportMonitorTimeout (for mode F) or fcIfePortSlowportMonitorTimeout (for mode E) object.
CIS fcIfSlowPortOperDelay	1.3.6.1.4.1.9.9.289.1.2.1.1.45	CiscoMilliSeconds	read-only	This object indicates the maximum operational credit delay experienced by the port at any given time. This object is an absolute value and resets to zero when the slowport condition disappears.
C64 fcIfStateChangeCount	1.3.6.1.4.1.9.9.289.1.2.1.1.46	Counter64	read-only	This object indicates the number of times that port had been changed its state from down to up.
fcIfStatEntry	1.3.6.1.4.1.9.9.289.1.2.5.1		not-accessible	An entry containing statistics information for each fibre channel port.
fcIfStatGroup	1.3.6.1.4.1.9.9.289.2.2.15			A collection objects giving port statistics.
fcIfStatTable	1.3.6.1.4.1.9.9.289.1.2.5		not-accessible	A table that contains, one entry for each physical fibre channel port. It contains statistics information.
C32 fcIfSyncLosses	1.3.6.1.4.1.9.9.289.1.2.1.1.2	Counter32	read-only	The number of loss of synchronization failures detected by the FC-Port.
fcIfTable	1.3.6.1.4.1.9.9.289.1.1.2		not-accessible	This table contains one entry per fibre channel switch port interface. Each entry holds the port interface parameters. The entries are created by the fabric switch when a module is inserted and it identifies a port on the module. Similarly when a module is removed from the fabric switch all the port entries in this table corresponding to that module are removed. This table also hold entries for Port Channel ports. NOTE: Nx_ports are not represented in this table.
C64 fcIfTimeOutDiscards	1.3.6.1.4.1.9.9.289.1.2.1.1.35	Counter64	read-only	The number of packets that are dropped due to time-out at the FC-port or due to the FC-port going offline.
U32 fcIfToggleCtrlConfigDuration	1.3.6.1.4.1.9.9.289.1.1.16.1.3	Unsigned32	read-write	This object specifies the time duration in which the port is allowed to toggle as many as the number of times given by fcIfToggleCtrlConfigNumFlaps. When fcIfToggleCtrlConfigEnable is 'false', this object does not take effect and its value cannot be changed.
T/F fcIfToggleCtrlConfigEnable	1.3.6.1.4.1.9.9.289.1.1.16.1.1	TruthValue	read-write	This object specifies if an interface can be stopped from toggling between up and down states or allowed to toggle continuously. If 'true', the interface will be stopped from toggling between up and down states. If 'false', the interface will be allowed to toggle continuously.
fcIfToggleCtrlConfigEntry	1.3.6.1.4.1.9.9.289.1.1.16.1		not-accessible	An entry in the fcIfToggleCtrlConfigTable.
fcIfToggleCtrlConfigGroup	1.3.6.1.4.1.9.9.289.2.2.27			A collection of objects which provides toggle control information for fibre channel interface.
U32 fcIfToggleCtrlConfigNumFlaps	1.3.6.1.4.1.9.9.289.1.1.16.1.4	Unsigned32	read-write	This object specifies the number of times a port can flap in the duration given by fcIfToggleCtrlConfigDuration. When fcIfToggleCtrlConfigEnable is 'false', this object does not take effect and its value cannot be changed.
INT fcIfToggleCtrlConfigReason	1.3.6.1.4.1.9.9.289.1.1.16.1.2	INTEGER	read-only	This object indicates the reason for which a port can be allowed to toggle between up and down states. notApplicable (1) - this reason is displayed when fcIfToggleCtrlConfigEnable is 'false'. linkFailure (2) - physical link failure.
fcIfToggleCtrlConfigTable	1.3.6.1.4.1.9.9.289.1.1.16		not-accessible	This table contains one entry per fibre channel interface. In certain scenarios, when an interface in a system transitions to a down state, it is likely for the interface to keep toggling and flapping between up and down states continuously. The objects in each entry of this table help in controlling such behaviour on an interface by stopping such frequent transitions and holding the interface in down state, if a stipulated number of such toggles happen in a given duration, as described in the objects.
FCP fcIfTransmitterType	1.3.6.1.4.1.9.9.289.1.1.2.1.17	FcPortTxTypes	read-only	The technology of the port transceiver. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value is instantiated but its value is irrelevant.
C32 fcIfTxWaitCount	1.3.6.1.4.1.9.9.289.1.2.1.1.15	Counter32	read-only	The number of times the FC-port waited due to lack of transmit credits.
C64 fcIfTxWtAvgBBCreditTransitionToZero	1.3.6.1.4.1.9.9.289.1.2.1.1.38	Counter64	read-only	fcIfTxWtAvgBBCreditTransitionToZero increments if the credit available is zero for 100 ms.
C32 fcIfUnknownClassFrames	1.3.6.1.4.1.9.9.289.1.2.1.1.24	Counter32	read-only	The number of unknown class frames received by FC-port.
STR fcIfVendor	1.3.6.1.4.1.9.9.289.1.1.2.1.21	SnmpAdminString	read-only	The connector unit ( e.g., for a GBIC ) vendor. If this is not applicable it returns a zero-length string. Since this is a characteristic of a physical port, this object is not applicable for Port Channel ports, i.e., the value is instantiated but its value is irrelevant.
FCN fcIfWwn	1.3.6.1.4.1.9.9.289.1.1.2.1.1	FcNameId	read-only	The World-Wide Name of this FC-Port. It's a 64-bit identifier and is unique worldwide.
fcotInfoNotificationGroup	1.3.6.1.4.1.9.9.289.2.2.20			A collection of notifications for FCOT Inserted/Removed.
NTF fcotInserted	1.3.6.1.4.1.9.9.289.1.3.0.4			This notification indicates that a Fibre Channel Optical Transmitter (FCOT) for an interface is inserted. This notification is generated by the agent whenever the 'cieIfOperStatusCause' object for one of its interfaces has transitioned into some other state from 'fcotNotPresent' state. This other state is indicated by the included value of 'cieIfOperStatusCause'.
NTF fcotRemoved	1.3.6.1.4.1.9.9.289.1.3.0.5			This notification indicates that a Fibre Channel Optical Transmitter (FCOT) for an interface is removed. This notification is generated by the agent whenever the 'cieIfOperStatusCause' object for one of its interfaces has entered into 'fcotNotPresent' state.
NTF fcTrunkIfDownNotify	1.3.6.1.4.1.9.9.289.1.3.0.1			This notification is generated by the agent whenever the fcTrunkifOperStatus object for this trunk interface is about to enter the down state from some other state. This other state is indicated by the included value of fcTrunkifOperStatus.
fcTrunkIfEntry	1.3.6.1.4.1.9.9.289.1.1.3.1		not-accessible	Each entry contains trunking FC-port parameters.
fcTrunkIfGroup	1.3.6.1.4.1.9.9.289.2.2.3			A collection objects giving trunk port information.
INT fcTrunkIfOperStatus	1.3.6.1.4.1.9.9.289.1.1.3.1.1	INTEGER	read-only	The operational state of a VSAN on this port. If the port is in trunking mode, it is possible that the port state may be 'down(2)' only in some VSANs. If this port is down in this VSAN only then port state shown by 'ifOperStatus' may not be 'down(2)', but this object will show 'down(2)'. The 'fcTrunkIfOperStatusCause' object shows the reason for port being 'down(2)'.
FCI fcTrunkIfOperStatusCause	1.3.6.1.4.1.9.9.289.1.1.3.1.2	FcIfOperStatusReason	read-only	The cause of current operational state of the port. The current operational state of the port is shown by the 'fcTrunkIfOperStatus'. This object will show 'none(2)' for all the 'fcTrunkIfOperStatus' values except for 'down(2)'. It will show one of the values from the 'FcIfOperStatusReason' textual convention if 'fcTrunkIfOperStatus' is 'down(2)'.
STR fcTrunkIfOperStatusCauseDescr	1.3.6.1.4.1.9.9.289.1.1.3.1.3	SnmpAdminString	read-only	The description for the cause of current operational state of the port, shown by the object 'fcTrunkIfOperStatusCause'.
fcTrunkIfTable	1.3.6.1.4.1.9.9.289.1.1.3		not-accessible	This table contains one entry for each trunking fibre channel port per VSAN. When the FC-port goes into trunking mode, the fibre channel switch creates one entry per FC-port for each active VSAN, from the allowed VSAN list for this port. The allowed VSAN list is configured using the objects, fcIfAllowedVsanList2k and fcIfAllowedVsanList4k. If an VSAN becomes inactive then the switch removes the corresponding entries from this table, if they exist.
NTF fcTrunkIfUpNotify	1.3.6.1.4.1.9.9.289.1.3.0.2			This notification is generated by the agent whenever the fcTrunkifOperStatus object for one of its trunk interfaces has left the down state and transitioned into some other state. This other state is indicated by the included value of fcTrunkifOperStatus.

RFC description

Manages Fibre Channel fabric elements including port types, speeds, and VSAN configurations on Cisco switches.

Start monitoring Cisco MDS Fibre Channel SAN switches with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-FC-FE-MIB

What Is CISCO-FC-FE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

How to Use in IPNetwork Monitor

RFC description