All MIBs › CISCO-ITP-TC-MIB
Organization: Cisco Systems, Inc.
Last Updated: 2004-04-26
Category: Cisco Devices, SNA and Legacy Protocols, Textual Conventions and Registries
Description:
Defines textual conventions for Cisco ITP SS7 and SIGTRAN signaling management MIBs.
Imported Objects
From CISCO-SMI
| ciscoMgmt | OBJECT-IDENTITY |
From SNMPv2-SMI
| Integer32 | |
| MODULE-IDENTITY | |
| Unsigned32 |
From SNMPv2-TC
| TEXTUAL-CONVENTION |
What Is CISCO-ITP-TC-MIB?
CISCO-ITP-TC-MIB is a Cisco proprietary textual-conventions module that defines shared data types (such as Called/Calling Party Point Codes and Common Language Location Codes) used across the family of Cisco ITP (IP Transfer Point) MIBs governing SS7/SIGTRAN signaling management. It belongs to Cisco's telecom SS7 signaling technology area and, being purely a TEXTUAL-CONVENTION definitions module, exposes no tables or scalar objects of its own. It is not directly used to monitor hardware or software status; instead it underpins the object syntax used by data-bearing ITP MIBs (such as CISCO-ITP-DSMR-SMPP-MIB and CISCO-ITP-GSP2-MIB) that do expose monitorable SS7 signaling-point and message-routing status. Its explicit dependency is on ITU-T Q-series SS7 standards (Q.700, Q.701) that define the underlying signaling concepts it encodes as SNMP types. It is deployed wherever Cisco ITP SS7 signaling gateways are present, as a foundational, non-polled dependency of the other ITP MIBs. The CISCO-ITP-TC-MIB MIB is therefore relevant to operators only indirectly, through the compliance statements and data types it contributes to the signaling MIBs that reference it.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-ITP-TC-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco ITP (IP Transfer Point) SS7 signaling gateway
Monitoring Examples
This module defines only TEXTUAL-CONVENTION type definitions with no tables or scalar objects, so there are no runtime values to poll or a monitoring scenario to describe; its role is purely to supply shared SS7 data types (e.g., point codes) to other Cisco ITP MIBs.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ciscoItpTextualConventions | 1.3.6.1.4.1.9.9.231 | The defines textual conventions used by to manage devices related to the SS7 network. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7. Abbreviations: CDPA - Called Party Point Code CGPA - Calling Party Point Code CLLI - Common Language Location Codes CR - Connection Request message CREF - Connection Refusal message DPC - Destination Point Code ERR - Error message GTA - Global Title Address GTI - Global Title Indicator GTT - Global Title Translation LUDT - long unitdata message LUDTS - long unitdata service message M2PA - MTP2 Peer-to-Peer Adaptation Layer M3UA - MTP3-User Adaptation MAP - Mated Application Table MSU - Message Signal Unit MTP - Message Transport Protocol MTP2 - Layer 2 of Message Transport Protocol MTP3 - Layer 3 of Message Transport Protocol NAI - Nature of Address Indicator NP - Numbering Plan NTT - The Japanese Nippon Telephone & Telegraph OPC - Originating Point Code PC - Point Code RTN - Route Table Name RSR - Reset Request message SCCP - Signalling Connection Control Part SCTP - Stream Transmission Protocol(RFC 2960) SI - Signalling Indicator SP - Signalling Point SLC - Signalling Link Code SLS - Signalling Link Selector SSN - Subsystem Number SUA - SCCP-User Adaptation TFR - Transfer Restricted messages TT - Title Translation TTC - The Japanese Telecommunications Technology Committee UDT - unitdata message UDTS - unitdata service message XUDT - extended unitdata message XUDTS - extended unitdata service message |
RFC description
Cisco vendor-specific textual convention MIB for ITP (SCTP Transparent Proxy); defines data types and conventions for ITP management MIBs.
Start monitoring Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.