| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoLwappInterfaceMIB | 1.3.6.1.4.1.9.9.686 | | | This MIB is intended to be implemented on all those
devices operating as Central Controllers (CC) that
terminate the Light Weight Access Point Protocol
tunnel from Cisco Light-weight LWAPP Access Points.
This MIB helps to manage the WLANs on the controller.
The relationship between CC and the LWAPP APs
can be depicted as follows:
+......+ +......+ +......+ +......+
+ + + + + + + +
+ CC + + CC + + CC + + CC +
+ + + + + + + +
+......+ +......+ +......+ +......+
.. . . .
.. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ AP + + AP + + AP + + AP + + AP +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
. . . .
. . . . .
. . . . .
. . . . .
. . . . .
+......+ +......+ +......+ +......+ +......+
+ + + + + + + + + +
+ MN + + MN + + MN + + MN + + MN +
+ + + + + + + + + +
+......+ +......+ +......+ +......+ +......+
The LWAPP tunnel exists between the controller and
the APs. The MNs communicate with the APs through
the protocol defined by the 802.11 standard.
LWAPP APs, upon bootup, discover and join one of the
controllers and the controller pushes the configuration,
that includes the WLAN parameters, to the LWAPP APs.
The APs then encapsulate all the 802.11 frames from
wireless clients inside LWAPP frames and forward
the LWAPP frames to the controller.
GLOSSARY
Access Point ( AP )
An entity that contains an 802.11 medium access
control ( MAC ) and physical layer ( PHY ) interface
and provides access to the distribution services via
the wireless medium for associated clients.
LWAPP APs encapsulate all the 802.11 frames in
LWAPP frames and sends it to the controller to which
it is logically connected to.
Central Controller ( CC )
The central entity that terminates the LWAPP protocol
tunnel from the LWAPP APs. Throughout this MIB,
this entity also referred to as 'controller'.
Light Weight Access Point Protocol ( LWAPP )
This is a generic protocol that defines the
communication between the Access Points and the
controllers.
Mobile Node ( MN )
A roaming 802.11 wireless device in a wireless
network associated with an access point.
REFERENCE
[1] Wireless LAN Medium Access Control ( MAC ) and
Physical Layer ( PHY ) Specifications.
[2] Draft-obara-capwap-lwapp-00.txt, IETF Light
Weight Access Point Protocol |
| ciscoLwappInterfaceMIBNotifs | 1.3.6.1.4.1.9.9.686.0 | | | |
| NTF ciscoLwappInterfaceAddressChanged | 1.3.6.1.4.1.9.9.686.0.1 | | | This notification is generated after the address of
an interface is changed. |
| NTF ciscoLwappInterfaceIpv6AddressStatus | 1.3.6.1.4.1.9.9.686.0.2 | | | This notification is generated after the Ipv6
address is changed |
| ciscoLwappInterfaceMIBObjects | 1.3.6.1.4.1.9.9.686.1 | | | |
| ciscoLwappInterfaceConfig | 1.3.6.1.4.1.9.9.686.1.1 | | | |
| clInterfaceConfigTable | 1.3.6.1.4.1.9.9.686.1.1.1 | | not-accessible | This table represents the configuration of all the
interfaces, both the static and the dynamic
interfaces, on the Wireless LAN Controller(WLC). |
| clInterfaceConfigEntry | 1.3.6.1.4.1.9.9.686.1.1.1.1 | | not-accessible | This object represents an entry in the clInterfaceConfigTable.
Each entry in this corresponds to an interface, indicated by
clInterfaceName. |
| OCT clInterfaceName | 1.3.6.1.4.1.9.9.686.1.1.1.1.1 | OCTET STRING | not-accessible | This object represents the name of the interface
on the controller. |
| T/F clInterfaceWired | 1.3.6.1.4.1.9.9.686.1.1.1.1.2 | TruthValue | read-write | This object specifies whether the interface
represented by clInterfaceName, will be used
for the wireless clients that are connected
to the WLC or will be used for the
wired clients connected to the WLC.
A value of 'true' indicates that, wired clients
will be connected to this interface.
A value of 'false' indicates that, wireless
clients will be connected to this interface. |
| U32 clInterfaceQuarantineVlanId | 1.3.6.1.4.1.9.9.686.1.1.1.1.3 | Unsigned32 | read-write | This object specifies the quarantine VLAN id
of the interface.
If the value is zero,then it means the interface is
non-quarantine and the client traffic through this interface
need not pass through any security checks.
If the value is non-zero, then it means the interface
is quarantine and the client traffic through this interface
should pass through the security check and there should be
an access VLAN mapped to this quarantine VLAN id, in the
security device. |
| T/F clInterfaceDhcpOpt82Enabled | 1.3.6.1.4.1.9.9.686.1.1.1.1.4 | TruthValue | read-write | This object specifies whether the interface
represented by clInterfaceName, has DHCP Option 82
enabled on it or not.
A value of 'true' indicates that, DHCP option 82 is
enabled for this interface.
A value of 'false' indicates that, DHCP option 82
is disabled for this interface. |
| INT clInterfaceDhcpProxyMode | 1.3.6.1.4.1.9.9.686.1.1.1.1.5 | INTEGER | read-write | This object specifies DHCP proxy mode on the
interface, which overrides the global DHCP proxy
mode. There are three modes as below:
A value of global indicates that, use the global
DHCP proxy mode on WLC.
A value of enabled indicates that, DHCP proxy mode
enabled on the interface.
A value of disabled indicates that, DHCP proxy mode
disabled (bridging) on the interface. |
| STR clInterfaceMdnsProfileName | 1.3.6.1.4.1.9.9.686.1.1.1.1.6 | SnmpAdminString | read-write | This object specifies the name of the MDNS
profile added on the Interface. |
| STR clInterfaceNasId | 1.3.6.1.4.1.9.9.686.1.1.1.1.7 | SnmpAdminString | read-write | This object specifies the NAS-ID of the interface.
NAS-ID string is sent to radius server by WLC (as
radius client) via authentication request, which
can be used to classify users to different groups
then radius server can reply a customized authentication
response. |
| T/F clInterfaceMappingRedPort | 1.3.6.1.4.1.9.9.686.1.1.1.1.8 | TruthValue | read-write | This object specifies whether the interface
represented by clInterfaceName, has mapping to redundancy
port.
A value of 'true' indicates that, redundancy port mapped
to interface.
A value of 'false' indicates that, redundancy port not mapped
to interface. |
| IPt clInterfacePrimaryIPv6AddrType | 1.3.6.1.4.1.9.9.686.1.1.1.1.9 | InetAddressType | read-write | This object specifies the address type of
the interface. |
| IP clInterfacePrimaryIPv6Addr | 1.3.6.1.4.1.9.9.686.1.1.1.1.10 | InetAddress | read-write | This object specifies address of the interface.
This parameter depends on prefix length and IPv6 gate
way address. All these parameters need to be set
together. |
| U32 clInterfacePrimaryPrefixLen | 1.3.6.1.4.1.9.9.686.1.1.1.1.11 | Unsigned32 | read-write | This object specifies the prefix length for interface
Ipv6 address. This parameter should be set along
with the primary IPv6 address |
| IPt clInterfacePrimaryIPv6GatewayType | 1.3.6.1.4.1.9.9.686.1.1.1.1.12 | InetAddressType | read-write | This object specifies gateway address type of the
interface. |
| IP clInterfacePrimaryIPv6Gateway | 1.3.6.1.4.1.9.9.686.1.1.1.1.13 | InetAddress | read-write | This object specifies gateway address of the interface.
This parameter should be set along with the IPv6 primary
address. |
| STR clInterfaceIPv6AclName | 1.3.6.1.4.1.9.9.686.1.1.1.1.14 | SnmpAdminString | read-write | This object specifies name of the IPV6 ACL
applied to the interface. This attribute is
applicable only to the management interface and other
dynamic interfaces. If it is required to remove the
ACL name for an interface, it should be set to an
empty string. |
| IPt clInterfaceLinkLocalIDType | 1.3.6.1.4.1.9.9.686.1.1.1.1.15 | InetAddressType | read-only | This object represents link local address type
of the interface. |
| IP clInterfaceLinkLocalID | 1.3.6.1.4.1.9.9.686.1.1.1.1.16 | InetAddress | read-only | This object represents link local address
of the interface. |
| T/F clInterfaceIPv6SLAAC | 1.3.6.1.4.1.9.9.686.1.1.1.1.17 | TruthValue | read-write | This object specifies the stateless address auto
configuration(SLAAC) status of the interface.
This applies only to the service port interface.
A value of 'true' indicates that, SLAAC for the
interface is enabled.
A value of 'false' indicates that, SLAAC for the
interface is disabled. |
| T/F clInterfaceLinkSelectEnabled | 1.3.6.1.4.1.9.9.686.1.1.1.1.18 | TruthValue | read-write | This object specifies whether the interface
represented by clInterfaceName, has DHCP option 82
link select enabled or disabled.
A value of 'true' indicates that, DHCP option 82
link select is enabled.
A value of 'false' indicates that, DHCP option 82
link select is disabled. |
| STR clInterfaceLinkSelectRelaySrcIntf | 1.3.6.1.4.1.9.9.686.1.1.1.1.19 | SnmpAdminString | read-write | This object specifies the name of the source
interface for DHCP opt82 link select. |
| T/F clInterfaceVpnSelectEnabled | 1.3.6.1.4.1.9.9.686.1.1.1.1.20 | TruthValue | read-write | This object specifies whether the interface
represented by clInterfaceName, has DHCP option 82
VPN select enabled or disabled.
A value of 'true' indicates that, DHCP option 82
VPN select is enabled.
A value of 'false' indicates that, DHCP option 82
VPN select is disabled. |
| STR clInterfaceVpnSelectVpnId | 1.3.6.1.4.1.9.9.686.1.1.1.1.21 | SnmpAdminString | read-write | This object specifies the Vpn Id of DHCP option 82 for
VPN select, The VPN-ID is sequence of 7 octets,
3 octet VPN authority organizationally unique identifier,
followed by 4 octet VPN index identifying VPN according
to OUI |
| STR clInterfaceVpnselectVrfName | 1.3.6.1.4.1.9.9.686.1.1.1.1.22 | SnmpAdminString | read-write | This object specifies the DHCP opt 82
VrfName for the VPN Select. |
| INT clInterfacePrimaryIpv6AddrStatus | 1.3.6.1.4.1.9.9.686.1.1.1.1.23 | INTEGER | read-only | This object represents the uniqueness of IPv6 address
assigned status.
A value of none(1) indicates that, assigned status is none,
A value of creating(2)indicates that, assigned status is
creating,
A value of tentative(3)indicates that, assigned status is
tentative,
A value of incomplete(4)indicates that, assigned status is
incomplete,
A value of verify(5)indicates that, assigned status is
verify,
A value of reachable(6)indicates that, assigned status is
reachable,
A value of stale(7)indicates that, assigned status is
stale,
A value of down(8) indicates that, assigned status is
down,
A value of unknown(9)indicates that, assigned status is
unknown,
A value of dad(10)indicates that, duplicate address
detection(dad). |
| INT clInterfaceLinkLocalIpv6AddrStatus | 1.3.6.1.4.1.9.9.686.1.1.1.1.24 | INTEGER | read-only | This objest represents the uniqueness of link local IPv6
address assigned status
A value of none(1) indicates that, assigned status is none,
A value of creating(2)indicates that, assigned status is
creating,
A value of tentative(3)indicates that, assigned status is
tentative,
A value of incomplete(4)indicates that, assigned status is
incomplete,
A value of verify(5)indicates that, assigned status is
verify,
A value of reachable(6)indicates that, assigned status is
reachable,
A value of stale(7)indicates that, assigned status is
stale,
A value of down(8) indicates that, assigned status is
down,
A value of unknown(9)indicates that, assigned status is
unknown,
A value of dad(10)indicates that, duplicate address
detection(dad). |
| clInterfaceGroupsConfigTable | 1.3.6.1.4.1.9.9.686.1.1.2 | | not-accessible | This table is used to maintain the interface groups.
An interface group is a logical grouping of interfaces
with unique VLAN ids. |
| clInterfaceGroupsConfigEntry | 1.3.6.1.4.1.9.9.686.1.1.2.1 | | not-accessible | This object represents an entry in
clInterfaceGroupsConfigTable. Entries can be added
or deleted by explicit management action by NMS
or by user console. |
| STR clInterfaceGroupName | 1.3.6.1.4.1.9.9.686.1.1.2.1.1 | SnmpAdminString | not-accessible | This object represents the name
assigned to identify the interface group. |
| STR clInterfaceGroupDescr | 1.3.6.1.4.1.9.9.686.1.1.2.1.2 | SnmpAdminString | read-create | This object specifies the description of interface
group. |
| T/F clInterfaceGroupIsQuarantine | 1.3.6.1.4.1.9.9.686.1.1.2.1.3 | TruthValue | read-only | This object represents whether the interface group
has quarantine interfaces.
A value of 'true' indicates that, the interface group
has quarantine interfaces.
A value of 'false' indicates that, the group has
nonquarantine interfaces. |
| ROW clInterfaceGroupRowStatus | 1.3.6.1.4.1.9.9.686.1.1.2.1.4 | RowStatus | read-create | This object represents status column for this row
and used to create and delete specific instances
of rows in this table. |
| STR clInterfaceGroupMdnsProfileName | 1.3.6.1.4.1.9.9.686.1.1.2.1.5 | SnmpAdminString | read-create | This object specifies the name of the MDNS
profile added on the interface group. |
| INT clInterfaceGroupFailDetectMode | 1.3.6.1.4.1.9.9.686.1.1.2.1.6 | INTEGER | read-create | This object specifies the mode of failure detection
(dirty interface logic)in the interface group when a client
fails to get an IP address from a VLAN.
'aggressive' - mark an interface dirty if three
failure attempts get reported
'nonaggressive' - mark an interface dirty only if
failure attempts are reported by three or more different
clients |
| clInterfaceGroupsMappingTable | 1.3.6.1.4.1.9.9.686.1.1.3 | | not-accessible | This table represents the mapping between the interface
and the interface group. |
| clInterfaceGroupsMappingEntry | 1.3.6.1.4.1.9.9.686.1.1.3.1 | | not-accessible | This object represents an entry in
clInterfaceGroupsMappingTable. Each entry in this
can be added or deleted by explicit management action
by NMS or by user console. |
| ROW clInterfaceGroupMappingRowStatus | 1.3.6.1.4.1.9.9.686.1.1.3.1.1 | RowStatus | read-create | This object represents status column for this row
and used to create and delete specific instances
of rows in this table. |
| ciscoLwappInterfaceInfo | 1.3.6.1.4.1.9.9.686.1.2 | | | |
| cLInterfaceTable | 1.3.6.1.4.1.9.9.686.1.2.1 | | not-accessible | This table represents the information about all the
interfaces, both the static and the dynamic interfaces,
on the Wireless LAN Controller(WLC). |
| cLInterfaceEntry | 1.3.6.1.4.1.9.9.686.1.2.1.1 | | not-accessible | Each entry in this table provides information about
one interface on the WLC. |
| IPt cLInterfacePreviousAddressType | 1.3.6.1.4.1.9.9.686.1.2.1.1.1 | InetAddressType | read-only | This object represents the previous type of
the interface's address on the controller. |
| IP cLInterfacePreviousAddress | 1.3.6.1.4.1.9.9.686.1.2.1.1.2 | InetAddress | read-only | This object represents the previous address of
the interface on the controller. |
| IPt cLInterfaceCurrentAddressType | 1.3.6.1.4.1.9.9.686.1.2.1.1.3 | InetAddressType | read-only | This object represents the current type of
the interface's address on the controller. |
| IP cLInterfaceCurrentAddress | 1.3.6.1.4.1.9.9.686.1.2.1.1.4 | InetAddress | read-only | This object represents the current address of
the interface on the controller. |
| ciscoLwappInterfaceMIBConform | 1.3.6.1.4.1.9.9.686.2 | | | |
| ciscoLwappInterfaceMIBCompliances | 1.3.6.1.4.1.9.9.686.2.1 | | | |
| ciscoLwappInterfaceMIBCompliance | 1.3.6.1.4.1.9.9.686.2.1.1 | | | The compliance statement for the SNMP entities that
implement the ciscoLwappInterfaceMIB module. |
| ciscoLwappInterfaceMIBComplianceRev01 | 1.3.6.1.4.1.9.9.686.2.1.2 | | | The compliance statement for the SNMP entities that
implement the ciscoLwappInterfaceMIB module. |
| ciscoLwappInterfaceMIBComplianceRev02 | 1.3.6.1.4.1.9.9.686.2.1.3 | | | The compliance statement for the SNMP entities that
implement the ciscoLwappInterfaceMIB module. |
| ciscoLwappInterfaceMIBGroups | 1.3.6.1.4.1.9.9.686.2.2 | | | |
| ciscoLwappInterfaceConfigGroup | 1.3.6.1.4.1.9.9.686.2.2.1 | | | This collection of objects represent the
configuration of interfaces on the controller.
ciscoLwappInterfaceConfigGroup object is superseded
by ciscoLwappInterfaceConfigGroupRev01. |
| ciscoLwappInterfaceGroupConfigSup1 | 1.3.6.1.4.1.9.9.686.2.2.2 | | | This collection of objects represent the
configuration of interface groups on the controller.
ciscoLwappInterfaceGroupConfigSup1 object is superseded
by ciscoLwappInterfaceGroupConfigSup1Rev01. |
| ciscoLwappInterfaceConfigGroupRev01 | 1.3.6.1.4.1.9.9.686.2.2.3 | | | This collection of objects represent the
configuration of interfaces on the controller. |
| ciscoLwappInterfaceGroupConfigSup1Rev01 | 1.3.6.1.4.1.9.9.686.2.2.4 | | | This collection of objects represent the
configuration of interface groups on the controller. |
| ciscoLwappInterfaceInfoGroup | 1.3.6.1.4.1.9.9.686.2.2.5 | | | This collection of objects represent the
configuration of interface info on the controller. |
| ciscoLwappInterfaceNotificationGroup | 1.3.6.1.4.1.9.9.686.2.2.6 | | | This supplemental collection of objects represents the
Interface related notifications sent by the agent to a network
management station. |
