CISCO-ITP-ACT-MIB

Description: Handles ITP SS7 accounting records and per-route traffic statistics used for signaling point analysis.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

CISCO-ITP-ACT-MIB is a Cisco enterprise MIB for the Cisco IP Transfer Point (ITP), a hardware-and-software platform that transports SS7 (Signalling System No. 7) telecom signaling traffic over IP, acting like an SS7 signaling point. It implements accounting-style statistics defined by ITU-T Q.752 for the MTP3 (Message Transfer Part 3) layer and Global Title Translation (GTT), tracking per-linkset, per-point-code traffic volumes. As a monitoring MIB it focuses on traffic/performance counters rather than physical hardware sensors: operators use it to watch sent/received packet and byte counts per linkset to gauge signaling load, capacity utilization, and route health on the ITP. It is closely tied to ITU Q-series SS7 standards and typically works alongside related Cisco ITP MIBs (e.g., signaling-point and MSU-rate MIBs) for a full picture of SS7 traffic. It is deployed in telecom carrier networks where Cisco ITP nodes carry SS7 signaling over IP core networks. Engineers can download the CISCO-ITP-ACT-MIB file directly to load it into their MIB browser.

An administrator would poll cItpActMtp3Table/cItpActMtp3TableEntry, keying by cItpActMtp3LinksetName, cItpActMtp3Dpc (destination point code), and cItpActMtp3Opc (origin point code), to track cItpActMtp3RcvdPackets, cItpActMtp3SentPackets, cItpActMtp3RcvdBytes, and cItpActMtp3SentBytes per linkset. A sustained drop in cItpActMtp3RcvdPackets for a given linkset while cItpActMtp3SentPackets stays constant would suggest an asymmetric signaling route failure. The cItpActGttTable provides similar accounting for Global Title Translation traffic, useful for capacity planning on GTT-heavy routes.

Manages ITP SS7 accounting records and per-route traffic statistics for signaling point analysis.