CISCO-RHINO-MIB

All MIBs › CISCO-RHINO-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2001-03-29

Category: Cisco Devices, Telephony and VoIP

Description: Manages the Cisco Rhino high-density voice gateway platform including DS0 channel and call statistics.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-RHINO-MIB?

CISCO-RHINO-MIB (module identity ciscoLS1010ChassisMIB) is a Cisco vendor-specific chassis MIB originally written for the Cisco LightStream 1010 ("Rhino") ATM switch and extended across many revisions to cover related chassis families (Catalyst 5500/6000/8500/8540, Cisco 6400, 8510, 4908G, TGX8750, C2948). It defines textual conventions for power-supply type (PsType), operational status (OperStatus, including fault/fanAlarm/partialFault states), admin status (AdminStatus), and port LED state (Led), organized into chassis, module, sub-module, port, CPU-switch, Ethernet-port, and port-LED groups. This makes it useful for monitoring the hardware health of ATM switch chassis — power supply and fan status, module/sub-module presence and type, and port LED indications — across a long-lived family of Cisco ATM/multiservice switching platforms. It depends on IF-MIB (InterfaceIndex, ifIndex) for correlating chassis ports to interfaces and on CISCO-SMI/CISCO-TC for common conventions, and administrators can look up the CISCO-RHINO-MIB MIB definitions when working with these legacy ATM chassis.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-RHINO-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco LightStream 1010 (Rhino) ATM switch and related Catalyst/Cisco 6400/8500 chassis families

Monitoring Examples

An operator polls the module and sub-module operational status objects (an OperStatus instance) for a given slot and checks the power-supply PsType/status pair; a status transitioning to fault(3) or fanAlarm(4) on a power supply would indicate a hardware failure requiring chassis intervention on the ATM switch.

What Can Be Monitored

power supply type and operational status
fan status/alarms
module and sub-module presence/type
port admin/operational status
port LED indications
chassis component fault conditions

Imported Objects

From CISCO-SMI

workgroup

OBJECT-IDENTITY

From CISCO-TC

Unsigned32

From IF-MIB

InterfaceIndex

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Gauge32
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using ciscoAtmSwitchDiscardCells OID:

Select a Cisco LightStream 1010 (Rhino) ATM switch (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ciscoAtmSwitchDiscardCells into the Find box to locate it in the OID tree, then select it and click OK. The total discarded cells of the switch. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
INT ciscoAtmCpuAdminStatus	1.3.6.1.4.1.9.5.11.1.5.1	INTEGER	read-write	Reset will reload the CPU board.
T/F ciscoAtmCpuTerminateOamFlow	1.3.6.1.4.1.9.5.11.1.5.7	TruthValue	read-write	Terminate all the incoming OAM cells to the CPU port.
T/F ciscoAtmInterceptEndToEndOamFlow	1.3.6.1.4.1.9.5.11.1.5.8	TruthValue	read-write	Indicates whether incoming end-to-end OAM flow cells are sent to the switch CPU. If the value is 'true', all incoming end-to-end OAM flow cells, including those on transit connections, are sent to the switch CPU. This value may be modified at any time. The modified value will apply to all existing connections. Note that if the value is 'false', the switch can not use the ATM PING application for end-to-end loopback on transit connections, since the end-to-end OAM cells on such connections will not be seen by the switch CPU.
C32 ciscoAtmSwitchDiscardCellsEx	1.3.6.1.4.1.9.5.11.1.5.4	Counter32	read-only	The total discarded cells of the switch.
G32 ciscoAtmSwitchFreeBuffer	1.3.6.1.4.1.9.5.11.1.5.3	Gauge32	read-only	The free cell buffer count in switch's shared memory.
OCT ciscoAtmSwitchInvalidCellHeader	1.3.6.1.4.1.9.5.11.1.5.6.1.2	OCTET STRING	read-only	The most recently received invalid cells header. octet 0 is port number (0-32), octet 1 bit 7-5 is PTI, octet 1 bit 4 is CLP, octet 1 bit 3-0 is GFC, octet 2 is VPI, octet 3 is high byte of VCI octet 4 is low byte of VCI.
ciscoAtmSwitchInvalidCellHeaderEntry	1.3.6.1.4.1.9.5.11.1.5.6.1		not-accessible	a entry of invalid cell header.
INT ciscoAtmSwitchInvalidCellHeaderIndex	1.3.6.1.4.1.9.5.11.1.5.6.1.1	INTEGER	not-accessible	A sequence number that identifies a invalid cell header entry in the table.
ciscoAtmSwitchInvalidCellHeaderTable	1.3.6.1.4.1.9.5.11.1.5.6		not-accessible	A list of invalid cell header entries.
C32 ciscoAtmSwitchInvalidCells	1.3.6.1.4.1.9.5.11.1.5.5	Counter32	read-only	The total invalid cells of the switch.
I32 ciscoAtmSwitchTotalBuffer	1.3.6.1.4.1.9.5.11.1.5.2	Integer32	read-only	The total cell buffer count in switch's shared memory.
INT ciscoLS1010Chassis12VoltStatus	1.3.6.1.4.1.9.5.11.1.1.15	INTEGER	read-only	The chassis 12V status.
INT ciscoLS1010ChassisBkplType	1.3.6.1.4.1.9.5.11.1.1.2	INTEGER	read-only	The chassis backplane type.
LED ciscoLS1010ChassisCardStatusLed	1.3.6.1.4.1.9.5.11.1.1.13	Led	read-only	LED Status of CPU card.
INT ciscoLS1010ChassisChangeAction	1.3.6.1.4.1.9.5.11.1.1.22	INTEGER	read-write	The action to take when there is any chassis change, which includes either power supply, fan and boards.
NTF ciscoLS1010ChassisChangeNotification	1.3.6.1.4.1.9.5.11.2.0.2			Agent detects any hot-swap component change or changes in the chassis.
INT ciscoLS1010ChassisClockingMode	1.3.6.1.4.1.9.5.11.1.1.23	INTEGER	read-write	The clocking mode of the ls1010 system. By default, the mode is non-revertive, which means that the clock will stick to the current priority, even though higher priority clock is available.
LED ciscoLS1010ChassisEnetLinkLed	1.3.6.1.4.1.9.5.11.1.1.14	Led	read-only	Ethernet link status LED of CPU card.
INT ciscoLS1010ChassisFailureAction	1.3.6.1.4.1.9.5.11.1.1.21	INTEGER	read-write	The action to take when there is any chassis failure, which includes either power supply, voltage, temperature and fan failure.
NTF ciscoLS1010ChassisFailureNotification	1.3.6.1.4.1.9.5.11.2.0.1			Agent detects a change in the status of ps0, ps1, fan, 12V line, and/or chassis temperature. This notification will be generated when the status changes from no-fault to fault, and also when the status changes from fault to no-fault.
LED ciscoLS1010ChassisFanLed	1.3.6.1.4.1.9.5.11.1.1.12	Led	read-only	LED Status of fan.
OPE ciscoLS1010ChassisFanStatus	1.3.6.1.4.1.9.5.11.1.1.11	OperStatus	read-only	Status of the chassis fan.
ciscoLS1010ChassisGroup	1.3.6.1.4.1.9.5.11.1.1
INT ciscoLS1010ChassisInletTempStatus	1.3.6.1.4.1.9.5.11.1.1.26	INTEGER	read-only	C6400 has two temperature sensors: core and inlet. C6400 use this object to represent the inlet temperature and use the object ciscoLS1010ChassisTempStatus to represent the core temperature.
TIM ciscoLS1010ChassisLastChange	1.3.6.1.4.1.9.5.11.1.1.20	TimeStamp	read-only	The last time chassis physical content get changed.
ciscoLS1010ChassisMIB	1.3.6.1.4.1.9.5.11			-Added enum sixPortDS3 for ciscoLS1010SubModuleType. -Added enum nodeSwitchProcessor2ndGeneration for ciscoLS1010ModuleType. -Added enum ac175W for psType. -Added Group object for Notification objects.
ciscoLS1010ChassisMIBClockingGroup	1.3.6.1.4.1.9.5.11.3.2.4			A collection of objects useful for managing clocking.
ciscoLS1010ChassisMIBCompliance	1.3.6.1.4.1.9.5.11.3.1.1			The compliance statement for entities which implement the Cisco LS1010 Chassis MIB. This statement was obsoleted by ciscoLS1010ChassisMIBComplianceRev1.
ciscoLS1010ChassisMIBComplianceRev1	1.3.6.1.4.1.9.5.11.3.1.2			The compliance statement for entities which implement the Cisco LS1010 Chassis MIB. This statement was obsoleted by ciscoLS1010ChassisMIBComplianceRev2.
ciscoLS1010ChassisMIBComplianceRev2	1.3.6.1.4.1.9.5.11.3.1.3			The compliance statement for entities which implement the Cisco LS1010 Chassis MIB
ciscoLS1010ChassisMIBComplianceRev3	1.3.6.1.4.1.9.5.11.3.1.4			The compliance statement for entities which implement the Cisco LS1010 Chassis MIB.
ciscoLS1010ChassisMIBComplianceRev4	1.3.6.1.4.1.9.5.11.3.1.5			The compliance statement for entities which implement the Cisco LS1010 Chassis MIB.
ciscoLS1010ChassisMIBComplianceRev5	1.3.6.1.4.1.9.5.11.3.1.6			The compliance statement for the Cisco 6400 product.
ciscoLS1010ChassisMIBComplianceRev6	1.3.6.1.4.1.9.5.11.3.1.7			The compliance statement for this MIB.
ciscoLS1010ChassisMIBCompliances	1.3.6.1.4.1.9.5.11.3.1
ciscoLS1010ChassisMIBConformance	1.3.6.1.4.1.9.5.11.3
ciscoLS1010ChassisMIBDeprecatedGroup	1.3.6.1.4.1.9.5.11.3.2.11			A collection of objects providing rhino chassis information which are obsolete.
ciscoLS1010ChassisMIBGroup	1.3.6.1.4.1.9.5.11.3.2.1			A collection of objects providing rhino chassis information
ciscoLS1010ChassisMIBGroup1	1.3.6.1.4.1.9.5.11.3.2.5			A collection of objects for managing the LS1010 chassis.
ciscoLS1010ChassisMIBGroup2	1.3.6.1.4.1.9.5.11.3.2.10			A collection of objects for managing the LS1010 chassis.
ciscoLS1010ChassisMIBGroups	1.3.6.1.4.1.9.5.11.3.2
ciscoLS1010ChassisMIBNotificationGroup	1.3.6.1.4.1.9.5.11.3.2.12			A collection of notifications supported by LS1010 chassis.
ciscoLS1010ChassisMIBNotificationPrefix	1.3.6.1.4.1.9.5.11.2
ciscoLS1010ChassisMIBNotifications	1.3.6.1.4.1.9.5.11.2.0
ciscoLS1010ChassisMIBObjects	1.3.6.1.4.1.9.5.11.1
ciscoLS1010ChassisMIBObsoleteGroup	1.3.6.1.4.1.9.5.11.3.2.2			A collection of objects providing rhino chassis information which are obsolete.
ciscoLS1010ChassisMIBRev1Group	1.3.6.1.4.1.9.5.11.3.2.3			A collection of objects useful for reporting the hardware version of sub-modules in the chassis.
INT ciscoLS1010ChassisNumSlots	1.3.6.1.4.1.9.5.11.1.1.19	INTEGER	read-only	The number of slots in the chassis for plug-in modules.
PCM ciscoLS1010ChassisPcmciaSlot0Type	1.3.6.1.4.1.9.5.11.1.1.17	PcmciaType	read-only	Type of PCMCIA slot 0 type.
PCM ciscoLS1010ChassisPcmciaSlot1Type	1.3.6.1.4.1.9.5.11.1.1.18	PcmciaType	read-only	Type of PCMCIA slot 1 type.
ADM ciscoLS1010ChassisPs0AdminStatus	1.3.6.1.4.1.9.5.11.1.1.4	AdminStatus	read-write	Enable or disable power supply 1.
LED ciscoLS1010ChassisPs0Led	1.3.6.1.4.1.9.5.11.1.1.6	Led	read-only	LED Status of power supply number 1.
OPE ciscoLS1010ChassisPs0Status	1.3.6.1.4.1.9.5.11.1.1.5	OperStatus	read-only	Status of power supply number 1.
PST ciscoLS1010ChassisPs0Type	1.3.6.1.4.1.9.5.11.1.1.3	PsType	read-only	Type of power supply number 1.
ADM ciscoLS1010ChassisPs1AdminStatus	1.3.6.1.4.1.9.5.11.1.1.8	AdminStatus	read-write	Enable or disable power supply 2.
LED ciscoLS1010ChassisPs1Led	1.3.6.1.4.1.9.5.11.1.1.10	Led	read-only	LED Status of power supply number 2.
OPE ciscoLS1010ChassisPs1Status	1.3.6.1.4.1.9.5.11.1.1.9	OperStatus	read-only	Status of power supply number 2.
PST ciscoLS1010ChassisPs1Type	1.3.6.1.4.1.9.5.11.1.1.7	PsType	read-only	Type of power supply number 2.
INT ciscoLS1010ChassisSysType	1.3.6.1.4.1.9.5.11.1.1.1	INTEGER	read-only	The chassis system type.
INT ciscoLS1010ChassisTempStatus	1.3.6.1.4.1.9.5.11.1.1.16	INTEGER	read-only	The chassis temperature status. The values of minorWarning(3), majorWarning(4) and criticalWarning(5) will be primarily used by C6400 to indicate the core temperature. C6400 will never report overTemperature(2) status. In C6400 there are two temperature sensors: core and inlet. C6400 use this object to represent the core temperature and the other object ciscoLS1010ChassisInletTempStatus to represent the inlet temperature.
ciscoLS1010CpuSwitchGroup	1.3.6.1.4.1.9.5.11.1.5
ADM ciscoLS1010ModuleAdminStatus	1.3.6.1.4.1.9.5.11.1.2.1.1.8	AdminStatus	read-write	This object, when read, always returns a value of ok(1). Setting this object to one of the acceptable values gives the following results: reset: reset the module's control logic enable: enable the module disable: disable the module Setting this object to any other values results in an error.
STR ciscoLS1010ModuleDescr	1.3.6.1.4.1.9.5.11.1.2.1.1.6	DisplayString	read-only	A descriptive string used by the agent to describe the module.
ciscoLS1010ModuleEntry	1.3.6.1.4.1.9.5.11.1.2.1.1		not-accessible	Entry containing information about one module in a slot of the chassis.
ciscoLS1010ModuleGroup	1.3.6.1.4.1.9.5.11.1.2
I32 ciscoLS1010ModuleHwVersion	1.3.6.1.4.1.9.5.11.1.2.1.1.4	Integer32	read-only	The hardware version of the module.
U32 ciscoLS1010ModuleHwVersionMinor	1.3.6.1.4.1.9.5.11.1.2.1.1.10	Unsigned32	read-only	The minor hardware version of the module.
INT ciscoLS1010ModuleIndex	1.3.6.1.4.1.9.5.11.1.2.1.1.1	INTEGER	not-accessible	A unique value for each module.
INT ciscoLS1010ModuleNumSubModules	1.3.6.1.4.1.9.5.11.1.2.1.1.7	INTEGER	read-only	The max number of sub-modules supported by this module.
OPE ciscoLS1010ModuleOperStatus	1.3.6.1.4.1.9.5.11.1.2.1.1.9	OperStatus	read-only	Operational status of the module.
I32 ciscoLS1010ModuleSerialNumber	1.3.6.1.4.1.9.5.11.1.2.1.1.3	Integer32	read-only	The serial number of the module. Deprecated in favor of object ciscoLS1010ModuleSerialNumberString. This object returns 0 for modules using an alphanumeric numbering scheme.
STR ciscoLS1010ModuleSerialNumberString	1.3.6.1.4.1.9.5.11.1.2.1.1.11	DisplayString	read-only	The serial number of the module.
I32 ciscoLS1010ModuleSwVersion	1.3.6.1.4.1.9.5.11.1.2.1.1.5	Integer32	read-only	The software version number.
ciscoLS1010ModuleTable	1.3.6.1.4.1.9.5.11.1.2.1		not-accessible	A list of module entries. The number of entries is given by the value of ciscoLS1010ChassisNumSlots.
INT ciscoLS1010ModuleType	1.3.6.1.4.1.9.5.11.1.2.1.1.2	INTEGER	read-only	The type of module.
ciscoLS1010PortEntry	1.3.6.1.4.1.9.5.11.1.4.1.1		not-accessible	Entry containing information for a particular port on a sub-module.
ciscoLS1010PortGroup	1.3.6.1.4.1.9.5.11.1.4
NUM ciscoLS1010PortIfIndex	1.3.6.1.4.1.9.5.11.1.4.1.1.2	InterfaceIndex	read-only	The ifIndex value assigned to this port.
INT ciscoLS1010PortIndex	1.3.6.1.4.1.9.5.11.1.4.1.1.1	INTEGER	not-accessible	An index value that uniquely identifies this port within a sub-module. The value is determined by the location of the port on the sub-module. Valid entries are 1 to the value of subModuleNumPorts for this sub-module.
ciscoLS1010PortTable	1.3.6.1.4.1.9.5.11.1.4.1		not-accessible	A list of port entries. The number of entries is determined by the number of modules in the chassis, the number of sub-module in the module and the number of ports on each sub-module.
INT ciscoLS1010SubModuleAdminStatus	1.3.6.1.4.1.9.5.11.1.3.1.1.8	INTEGER	read-write	This object can be read/written as reset or ok.
STR ciscoLS1010SubModuleDescr	1.3.6.1.4.1.9.5.11.1.3.1.1.6	DisplayString	read-only	A descriptive string used by the agent to describe the module.
ciscoLS1010SubModuleEntry	1.3.6.1.4.1.9.5.11.1.3.1.1		not-accessible	Entry containing information about one sub-module in a sub-slot of the module.
ciscoLS1010SubModuleGroup	1.3.6.1.4.1.9.5.11.1.3
I32 ciscoLS1010SubModuleHwVersion	1.3.6.1.4.1.9.5.11.1.3.1.1.4	Integer32	read-only	The major hardware version of the sub-module. Together with ciscoLS1010SubModuleHwVersionMinor, this completely specifies the hardware version of the sub-module.
I32 ciscoLS1010SubModuleHwVersionMinor	1.3.6.1.4.1.9.5.11.1.3.1.1.9	Integer32	read-only	The minor hardware version of the sub-module. Together with ciscoLS1010SubModuleHwVersion, this completely specifies the hardware version of the sub-module.
INT ciscoLS1010SubModuleIndex	1.3.6.1.4.1.9.5.11.1.3.1.1.1	INTEGER	not-accessible	A unique value for each sub-module within the module. This value is determined by sub-slot number where the sub-module is inserted.
INT ciscoLS1010SubModuleNumPorts	1.3.6.1.4.1.9.5.11.1.3.1.1.7	INTEGER	read-only	The maximum number of ports supported by this sub-module.
OPE ciscoLS1010SubModuleOperStatus	1.3.6.1.4.1.9.5.11.1.3.1.1.10	OperStatus	read-only	Operational status of the submodule.
I32 ciscoLS1010SubModuleSerialNumber	1.3.6.1.4.1.9.5.11.1.3.1.1.3	Integer32	read-only	The serial number of the sub-module. Deprecated in favor of object ciscoLS1010SubModuleSerialNumberString. This object returns 0 for submodules using an alphanumeric numbering scheme.
STR ciscoLS1010SubModuleSerialNumberString	1.3.6.1.4.1.9.5.11.1.3.1.1.11	DisplayString	read-only	The serial number of the sub-module.
I32 ciscoLS1010SubModuleSwVersion	1.3.6.1.4.1.9.5.11.1.3.1.1.5	Integer32	read-only	The software version number.
ciscoLS1010SubModuleTable	1.3.6.1.4.1.9.5.11.1.3.1		not-accessible	A list of sub-module entries. The number of entries is given by the value of ciscoLS1010SlotNumSubModules.
INT ciscoLS1010SubModuleType	1.3.6.1.4.1.9.5.11.1.3.1.1.2	INTEGER	read-only	The type of sub-module.
INT ciscols1010SystemClockSourcePriority	1.3.6.1.4.1.9.5.11.1.1.25	INTEGER	read-write	The highest priority at which 'system' is configured as a network clock source.
INT ciscols1010SystemClockSourceStatus	1.3.6.1.4.1.9.5.11.1.1.24	INTEGER	read-only	The network clock source status of 'system' source: 'notSelected' indicates 'system' not selected as the network clock source. 'selected' indicates ASP freerunning(system) is selected as network clock source.
INT clsEnetPortAdminSpeed	1.3.6.1.4.1.9.5.11.1.6.1.1.2	INTEGER	read-write	Indicates the desired speed of the port in bits per second. The current operational speed of the port is determined by ifSpeed. If the port could not agree with the far end on port speed, the port will be in auto(2) mode, which will force the port to transmit in speed whichever is lower. Unknown(1) indicates either the port does not support admin speed, or the admin speed is none of the defined.
INT clsEnetPortDuplex	1.3.6.1.4.1.9.5.11.1.6.1.1.1	INTEGER	read-write	Indicates whether the port is operating in half-duplex, full-duplex, or auto mode. If the port could not agree with the far end on port duplex, the port will be in auto(2) mode. Unknown(1) indicates either the port does not support duplex mode, or the duplex mode is none of the defined.
clsEnetPortEntry	1.3.6.1.4.1.9.5.11.1.6.1.1		not-accessible	Entry contains information of a particular ethernet port.
clsEnetPortGroup	1.3.6.1.4.1.9.5.11.1.6
clsEnetPortGroup1	1.3.6.1.4.1.9.5.11.3.2.6			A collection of objects for managing ethernet ports.
INT clsEnetPortLinkStatus	1.3.6.1.4.1.9.5.11.1.6.1.1.4	INTEGER	read-write	This object indicates how the link status of the port came up. autoNegotiate(2) -- the port will try to negotiate the link with the partner port. If successful, the link will come up, otherwise the link will remain down. forceUp(3) -- the port will force the link up irrespective of its partner port. This will bring up the link in full duplex only. Default is autoNegotiate(2).
clsEnetPortTable	1.3.6.1.4.1.9.5.11.1.6.1		not-accessible	A list of ethernet port entries. This table is mainly to support ethernet port only.
INT clsEnetPortType	1.3.6.1.4.1.9.5.11.1.6.1.1.3	INTEGER	read-only	The type of physical layer medium-dependent interface on the port. unknown(1) indicates that the port type is none of those defined. empty(6) indicates that the port is not present.
clsInletTempGroup	1.3.6.1.4.1.9.5.11.3.2.9			A collection of objects for reporting inlet temperature.
clsOperStatusGroup	1.3.6.1.4.1.9.5.11.3.2.8			A collection of objects for displaying operational status of modules and sub-modules in the chassis.
clsPortLedEntry	1.3.6.1.4.1.9.5.11.1.7.1.1		not-accessible	Entry contains information of a particular LED associated with a particular port which is identified by ifIndex.
clsPortLedGroup	1.3.6.1.4.1.9.5.11.1.7
clsPortLedGroup1	1.3.6.1.4.1.9.5.11.3.2.7			A collection of objects for showing port LEDs.
INT clsPortLedIndex	1.3.6.1.4.1.9.5.11.1.7.1.1.1	INTEGER	not-accessible	An index that uniquely identifies this LED among all the LEDs associated with the port identified by ifIndex. This value is related to the physical location of the LED, and is in ascending order from top to bottom, left to right.
INT clsPortLedStatus	1.3.6.1.4.1.9.5.11.1.7.1.1.3	INTEGER	read-only	Indicates the status of the LED. Unknown(1) indicates either the LED status is not supported or the status is none of the defined.
clsPortLedTable	1.3.6.1.4.1.9.5.11.1.7.1		not-accessible	A list of LED entries associated with a port.
INT clsPortLedType	1.3.6.1.4.1.9.5.11.1.7.1.1.2	INTEGER	read-only	Indicates the type or label of the LED.

RFC description

Cisco vendor-private MIB for managing Rhino voice and fax gateway appliances.

Start monitoring Cisco LightStream 1010 (Rhino) ATM switch (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-RHINO-MIB