CIE1000-MSTP-MIB

All MIBs › CIE1000-MSTP-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2015-11-13

Category: Cisco Devices, VLAN and Bridging

Description: Manages IEEE 802.1s Multiple Spanning Tree Protocol (MSTP) instance configuration on Cisco IE1000 industrial switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIE1000-MSTP-MIB?

CIE1000-MSTP-MIB is a Cisco private MIB, based on the IEEE 802.1Q-2005/802.1s standard, for configuring and monitoring the Multiple Spanning Tree Protocol (MSTP) on Cisco IE1000 series industrial Ethernet switches. It exposes bridge-wide MSTP parameters (max age, hello time, forward delay, force version), per-instance (MSTI) spanning-tree parameters, and protective features like BPDU filtering, BPDU guard, and error-recovery delay. Its monitoring value lies in verifying spanning-tree software configuration and behavior -- confirming timers are set correctly, that guard/filtering protections are active, and that error-recovery timing is configured -- which is important for catching network loop or topology-change issues quickly. It is explicitly derived from and dependent on the standard IEEE 802.1Q-2005 MSTP MIB structure, adapted as a private Cisco version. It is deployed on Cisco IE1000 industrial switches used in factory-floor and ruggedized networking environments where spanning-tree stability is critical, and engineers typically perform a CIE1000-MSTP-MIB download to load it into their monitoring tools before deployment.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIE1000-MSTP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IE1000 industrial Ethernet switch

Monitoring Examples

An admin can read cie1000MstpConfigBridgeParamsBridgeMaxAge, cie1000MstpConfigBridgeParamsBridgeHelloTime, and cie1000MstpConfigBridgeParamsBridgeForwardDelay to confirm the bridge's spanning-tree timers match the intended design, and check cie1000MstpConfigBridgeParamsBpduGuard/BpduFiltering to verify port-protection features are enabled. Walking cie1000MstpConfigMstiParamTable/Entry by cie1000MstpConfigMstiParamInstance reveals per-MST-instance configuration, useful for spotting an instance with mismatched parameters that could cause a topology loop. An unexpectedly long cie1000MstpConfigBridgeParamsErrorRecoveryDelay might explain slow recovery after a port error-disable event.

What Can Be Monitored

MSTP bridge timers (max age, hello time, forward delay)
BPDU filtering/guard status
per-MSTI instance configuration
error recovery delay
force version setting

Imported Objects

From CIE1000-TC

CIE1000DisplayString
CIE1000InterfaceIndex
CIE1000Unsigned16
CIE1000Unsigned8
CIE1000VlanListQuarter

From CISCO-IE1000-MIB

cie1000SwitchMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
cie1000MstpConfig	1.3.6.1.4.1.9.9.832.1.20.1.2
cie1000MstpConfigAggrParams	1.3.6.1.4.1.9.9.832.1.20.1.2.5
T/F cie1000MstpConfigAggrParamsAdminAutoEdgePort	1.3.6.1.4.1.9.9.832.1.20.1.2.5.3	TruthValue	read-write	adminAutoEdgePort parameter - 17.13.3 of IEEE Std 802.1D
T/F cie1000MstpConfigAggrParamsAdminEdgePort	1.3.6.1.4.1.9.9.832.1.20.1.2.5.2	TruthValue	read-write	adminEdgePort parameter - 18.3.3 of IEEE Std 802.1D
NUM cie1000MstpConfigAggrParamsAdminPointToPointMAC	1.3.6.1.4.1.9.9.832.1.20.1.2.5.4	CIE1000MstpPoint2Point	read-write	adminPointToPointMAC parameter - 6.4.3 of IEEE Std 802.1D
T/F cie1000MstpConfigAggrParamsBpduGuard	1.3.6.1.4.1.9.9.832.1.20.1.2.5.7	TruthValue	read-write	If enabled, causes the port to disable itself upon receiving valid BPDU's. Contrary to the similar bridge setting, the port Edge status does not effect this setting. A port entering error-disabled state due to this setting is subject to the bridge ErrorRecoveryDelay setting as well
T/F cie1000MstpConfigAggrParamsEnable	1.3.6.1.4.1.9.9.832.1.20.1.2.5.1	TruthValue	read-write	Control whether port is controlled by xSTP. If disabled, the port forwarding state follow the MAC state
cie1000MstpConfigAggrParamsInfoGroup	1.3.6.1.4.1.9.9.832.1.20.2.2.7			A collection of objects.
T/F cie1000MstpConfigAggrParamsRestrictedRole	1.3.6.1.4.1.9.9.832.1.20.1.2.5.5	TruthValue	read-write	restrictedRole parameter - 13.25.14 of IEEE Std 802.1Q-2005
T/F cie1000MstpConfigAggrParamsRestrictedTcn	1.3.6.1.4.1.9.9.832.1.20.1.2.5.6	TruthValue	read-write	restrictedRole parameter - 13.25.15 of IEEE Std 802.1Q-2005
cie1000MstpConfigBridgeParams	1.3.6.1.4.1.9.9.832.1.20.1.2.1
T/F cie1000MstpConfigBridgeParamsBpduFiltering	1.3.6.1.4.1.9.9.832.1.20.1.2.1.7	TruthValue	read-write	BPDU filtering for edge ports. Control whether a port explicitly configured as Edge will transmit and receive BPDUs
T/F cie1000MstpConfigBridgeParamsBpduGuard	1.3.6.1.4.1.9.9.832.1.20.1.2.1.8	TruthValue	read-write	BPDU guard for edge ports. Control whether a port explicitly configured as Edge will disable itself upon reception of a BPDU. The port will enter the error-disabled state, and will be removed from the active topology.
U32 cie1000MstpConfigBridgeParamsBridgeForwardDelay	1.3.6.1.4.1.9.9.832.1.20.1.2.1.3	Unsigned32	read-write	Bridge Forward Delay, IEEE-802.1D-2004 sect 17.20
U32 cie1000MstpConfigBridgeParamsBridgeHelloTime	1.3.6.1.4.1.9.9.832.1.20.1.2.1.2	Unsigned32	read-write	Bridge Hello Time, 13.25.7 of IEEE-802.1Q-2005. Fixed value of two seconds by the standard, but this implementation allow a compatibility range from 1 to 2 seconds, in stipulated in 802.1Q-2005
U32 cie1000MstpConfigBridgeParamsBridgeMaxAge	1.3.6.1.4.1.9.9.832.1.20.1.2.1.1	Unsigned32	read-write	Bridge Max Age, IEEE-802.1D-2004 sect 13.23.4
U32 cie1000MstpConfigBridgeParamsErrorRecoveryDelay	1.3.6.1.4.1.9.9.832.1.20.1.2.1.9	Unsigned32	read-write	The number of seconds until a STP inconsistent port is recovered. Valid values are zero (recovery disabled) or between 30 and 86400 (24 hours)
CIE cie1000MstpConfigBridgeParamsForceVersion	1.3.6.1.4.1.9.9.832.1.20.1.2.1.4	CIE1000MSTPForceVersion	read-write	value of the Force Protocol Version parameter - 13.6.2 of IEEE-802.1Q-2005
cie1000MstpConfigBridgeParamsInfoGroup	1.3.6.1.4.1.9.9.832.1.20.2.2.1			A collection of objects.
CIE cie1000MstpConfigBridgeParamsMaxHops	1.3.6.1.4.1.9.9.832.1.20.1.2.1.6	CIE1000Unsigned8	read-write	MaxHops - 13.22.1 of IEEE-802.1Q-2005
U32 cie1000MstpConfigBridgeParamsTxHoldCount	1.3.6.1.4.1.9.9.832.1.20.1.2.1.5	Unsigned32	read-write	TxHoldCount - 17.13.12 of IEEE Std 802.1D
T/F cie1000MstpConfigCistInterfaceParamAdminAutoEdgePort	1.3.6.1.4.1.9.9.832.1.20.1.2.4.1.4	TruthValue	read-write	adminAutoEdgePort parameter - 17.13.3 of IEEE Std 802.1D
T/F cie1000MstpConfigCistInterfaceParamAdminEdgePort	1.3.6.1.4.1.9.9.832.1.20.1.2.4.1.3	TruthValue	read-write	adminEdgePort parameter - 18.3.3 of IEEE Std 802.1D
NUM cie1000MstpConfigCistInterfaceParamAdminPointToPointMAC	1.3.6.1.4.1.9.9.832.1.20.1.2.4.1.5	CIE1000MstpPoint2Point	read-write	adminPointToPointMAC parameter - 6.4.3 of IEEE Std 802.1D
T/F cie1000MstpConfigCistInterfaceParamBpduGuard	1.3.6.1.4.1.9.9.832.1.20.1.2.4.1.8	TruthValue	read-write	If enabled, causes the port to disable itself upon receiving valid BPDU's. Contrary to the similar bridge setting, the port Edge status does not effect this setting. A port entering error-disabled state due to this setting is subject to the bridge ErrorRecoveryDelay setting as well
T/F cie1000MstpConfigCistInterfaceParamEnable	1.3.6.1.4.1.9.9.832.1.20.1.2.4.1.2	TruthValue	read-write	Control whether port is controlled by xSTP. If disabled, the port forwarding state follow the MAC state
cie1000MstpConfigCistInterfaceParamEntry	1.3.6.1.4.1.9.9.832.1.20.1.2.4.1		not-accessible	Each CIST physical interface has a set of parameters
NUM cie1000MstpConfigCistInterfaceParamInterfaceNo	1.3.6.1.4.1.9.9.832.1.20.1.2.4.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
T/F cie1000MstpConfigCistInterfaceParamRestrictedRole	1.3.6.1.4.1.9.9.832.1.20.1.2.4.1.6	TruthValue	read-write	restrictedRole parameter - 13.25.14 of IEEE Std 802.1Q-2005
T/F cie1000MstpConfigCistInterfaceParamRestrictedTcn	1.3.6.1.4.1.9.9.832.1.20.1.2.4.1.7	TruthValue	read-write	restrictedRole parameter - 13.25.15 of IEEE Std 802.1Q-2005
cie1000MstpConfigCistInterfaceParamTable	1.3.6.1.4.1.9.9.832.1.20.1.2.4		not-accessible	This is a table of the CIST physical interface parameters
cie1000MstpConfigCistInterfaceParamTableInfoGroup	1.3.6.1.4.1.9.9.832.1.20.2.2.6			A collection of objects.
U32 cie1000MstpConfigMstiAggrParamAdminPathCost	1.3.6.1.4.1.9.9.832.1.20.1.2.7.1.3	Unsigned32	read-write	Path Cost - 13.37.1 of 802.1Q-2005
CIE cie1000MstpConfigMstiAggrParamAdminPortPriority	1.3.6.1.4.1.9.9.832.1.20.1.2.7.1.4	CIE1000Unsigned8	read-write	priority field for the Port Identifier - 13.24.12 of 802.1Q-2005
cie1000MstpConfigMstiAggrParamEntry	1.3.6.1.4.1.9.9.832.1.20.1.2.7.1		not-accessible	The aggregations for each MSTI has a set of parameters
I32 cie1000MstpConfigMstiAggrParamInstance	1.3.6.1.4.1.9.9.832.1.20.1.2.7.1.1	Integer32	accessible-for-notify	Bridge instance number. The CIST = 0, MSTI1 = 1, etc
cie1000MstpConfigMstiAggrParamTable	1.3.6.1.4.1.9.9.832.1.20.1.2.7		not-accessible	This is a table of the MSTI aggregations parameters
cie1000MstpConfigMstiAggrParamTableInfoGroup	1.3.6.1.4.1.9.9.832.1.20.2.2.9			A collection of objects.
cie1000MstpConfigMstiConfig	1.3.6.1.4.1.9.9.832.1.20.1.2.3
cie1000MstpConfigMstiConfigEntry	1.3.6.1.4.1.9.9.832.1.20.1.2.3.2.1		not-accessible	The first element of the table contains the value 0, the second element the MSTID value corresponding to VID 1, the third element the MSTID value corresponding to VID 2, and so on, with the next to last element of the table containing the MSTID value corresponding to VID 4094, and the last element containing the value 0.
cie1000MstpConfigMstiConfigId	1.3.6.1.4.1.9.9.832.1.20.1.2.3.1
cie1000MstpConfigMstiConfigIdInfoGroup	1.3.6.1.4.1.9.9.832.1.20.2.2.3			A collection of objects.
STR cie1000MstpConfigMstiConfigIdName	1.3.6.1.4.1.9.9.832.1.20.1.2.3.1.1	CIE1000DisplayString	read-write	The configuration name
CIE cie1000MstpConfigMstiConfigIdRevision	1.3.6.1.4.1.9.9.832.1.20.1.2.3.1.2	CIE1000Unsigned16	read-write	The configuration revision
CIE cie1000MstpConfigMstiConfigMstid	1.3.6.1.4.1.9.9.832.1.20.1.2.3.2.1.2	CIE1000Unsigned8	read-write	The MSTID value associated with the vlan id
cie1000MstpConfigMstiConfigTable	1.3.6.1.4.1.9.9.832.1.20.1.2.3.2		not-accessible	This is the 802.1Q - 8.9 MST Configuration table For the purposes of calculating the Configuration Digest, the MST Configuration Table is considered to contain 4096 consecutive single octet elements, where each element of the table (with the exception of the first and last) contains an MSTID value.
cie1000MstpConfigMstiConfigTableInfoGroup	1.3.6.1.4.1.9.9.832.1.20.2.2.4			A collection of objects.
I32 cie1000MstpConfigMstiConfigVid	1.3.6.1.4.1.9.9.832.1.20.1.2.3.2.1.1	Integer32	accessible-for-notify	Vlan id
CIE cie1000MstpConfigMstiConfigVlanBitmapAccessVlans0To1K	1.3.6.1.4.1.9.9.832.1.20.1.2.3.3.1.2	CIE1000VlanListQuarter	read-write	First quarter of bit-array indicating the enabled access VLANs.
CIE cie1000MstpConfigMstiConfigVlanBitmapAccessVlans1KTo2K	1.3.6.1.4.1.9.9.832.1.20.1.2.3.3.1.3	CIE1000VlanListQuarter	read-write	Second quarter of bit-array indicating the enabled access VLANs.
CIE cie1000MstpConfigMstiConfigVlanBitmapAccessVlans2KTo3K	1.3.6.1.4.1.9.9.832.1.20.1.2.3.3.1.4	CIE1000VlanListQuarter	read-write	Third quarter of bit-array indicating the enabled access VLANs.
CIE cie1000MstpConfigMstiConfigVlanBitmapAccessVlans3KTo4K	1.3.6.1.4.1.9.9.832.1.20.1.2.3.3.1.5	CIE1000VlanListQuarter	read-write	Last quarter of bit-array indicating the enabled access VLANs.
cie1000MstpConfigMstiConfigVlanBitmapEntry	1.3.6.1.4.1.9.9.832.1.20.1.2.3.3.1		not-accessible	The first element of the table contains vlan bitmap corresponding to MSTI 0, the second element contains vlan bitmap corresponding to MSTI 1 until the 7th element. MSTI range is 0-7.
I32 cie1000MstpConfigMstiConfigVlanBitmapMstiValue	1.3.6.1.4.1.9.9.832.1.20.1.2.3.3.1.1	Integer32	accessible-for-notify	MSTI value.
cie1000MstpConfigMstiConfigVlanBitmapTable	1.3.6.1.4.1.9.9.832.1.20.1.2.3.3		not-accessible	This is the 802.1Q - 8.9 MST Configuration table For the purposes of calculating the Configuration Digest, the MST Configuration Table is considered to contain 8 consecutive single octet elements, where each element of the table contains an vlan bitmap (vlans that have the MSTI value specified are set to one).
cie1000MstpConfigMstiConfigVlanBitmapTableInfoGroup	1.3.6.1.4.1.9.9.832.1.20.2.2.5			A collection of objects.
U32 cie1000MstpConfigMstiInterfaceParamAdminPathCost	1.3.6.1.4.1.9.9.832.1.20.1.2.6.1.3	Unsigned32	read-write	Path Cost - 13.37.1 of 802.1Q-2005
CIE cie1000MstpConfigMstiInterfaceParamAdminPortPriority	1.3.6.1.4.1.9.9.832.1.20.1.2.6.1.4	CIE1000Unsigned8	read-write	priority field for the Port Identifier - 13.24.12 of 802.1Q-2005
cie1000MstpConfigMstiInterfaceParamEntry	1.3.6.1.4.1.9.9.832.1.20.1.2.6.1		not-accessible	Each MSTI interface has a set of parameters
I32 cie1000MstpConfigMstiInterfaceParamInstance	1.3.6.1.4.1.9.9.832.1.20.1.2.6.1.2	Integer32	accessible-for-notify	Bridge instance number. The CIST = 0, MSTI1 = 1, etc
NUM cie1000MstpConfigMstiInterfaceParamInterfaceNo	1.3.6.1.4.1.9.9.832.1.20.1.2.6.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
cie1000MstpConfigMstiInterfaceParamTable	1.3.6.1.4.1.9.9.832.1.20.1.2.6		not-accessible	This is a table of the MSTI interface parameters
cie1000MstpConfigMstiInterfaceParamTableInfoGroup	1.3.6.1.4.1.9.9.832.1.20.2.2.8			A collection of objects.
cie1000MstpConfigMstiParamEntry	1.3.6.1.4.1.9.9.832.1.20.1.2.2.1		not-accessible	Each MSTI has a set of parameters
I32 cie1000MstpConfigMstiParamInstance	1.3.6.1.4.1.9.9.832.1.20.1.2.2.1.1	Integer32	accessible-for-notify	Bridge instance number. The CIST = 0, MSTI1 = 1, etc
CIE cie1000MstpConfigMstiParamPriority	1.3.6.1.4.1.9.9.832.1.20.1.2.2.1.2	CIE1000Unsigned8	read-write	Bridge Priority
cie1000MstpConfigMstiParamTable	1.3.6.1.4.1.9.9.832.1.20.1.2.2		not-accessible	This is a table of the bridge instance (MSTIs) parameters
cie1000MstpConfigMstiParamTableInfoGroup	1.3.6.1.4.1.9.9.832.1.20.2.2.2			A collection of objects.
cie1000MstpMib	1.3.6.1.4.1.9.9.832.1.20			This is a private version of the 802.1Q-2005 MSTP MIB
cie1000MstpMibCompliance	1.3.6.1.4.1.9.9.832.1.20.2.1.1			The compliance statement for the implementation.
cie1000MstpMibCompliances	1.3.6.1.4.1.9.9.832.1.20.2.1
cie1000MstpMibConformance	1.3.6.1.4.1.9.9.832.1.20.2
cie1000MstpMibGroups	1.3.6.1.4.1.9.9.832.1.20.2.2
cie1000MstpMibObjects	1.3.6.1.4.1.9.9.832.1.20.1
cie1000MstpStatus	1.3.6.1.4.1.9.9.832.1.20.1.3
U32 cie1000MstpStatusBridgeBridgeForwardDelay	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.13	Unsigned32	read-only	Bridge Forward Delay, IEEE-802.1D-2004 sect 13.23.4
U32 cie1000MstpStatusBridgeBridgeHelloTime	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.12	Unsigned32	read-only	Bridge Hello Time, IEEE-802.1D-2004 sect 13.23.4
OCT cie1000MstpStatusBridgeBridgeId	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.2	OCTET STRING	read-only	Bridge Identifier of this bridge
U32 cie1000MstpStatusBridgeBridgeMaxAge	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.11	Unsigned32	read-only	Bridge Max Age, IEEE-802.1D-2004 sect 13.23.4
U32 cie1000MstpStatusBridgeCistInternalPathCost	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.17	Unsigned32	read-only	CIST Path Cost
OCT cie1000MstpStatusBridgeCistRegionalRoot	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.16	OCTET STRING	read-only	CIST Regional Root Identifier (13.16.4)
OCT cie1000MstpStatusBridgeDesignatedRoot	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.6	OCTET STRING	read-only	Designated Root Bridge
cie1000MstpStatusBridgeEntry	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1		not-accessible	A MSTP Bridge instance set of status objects
CIE cie1000MstpStatusBridgeForceVersion	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.15	CIE1000MSTPForceVersion	read-only	Value of the Force Protocol Version parameter - IEEE-802.1D-2004 sect 17.16.1
U32 cie1000MstpStatusBridgeForwardDelay	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.10	Unsigned32	read-only	Forward Delay, IEEE-802.1D-2004 sect 13.23.7
I32 cie1000MstpStatusBridgeInstance	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.1	Integer32	accessible-for-notify	Bridge instance number. The CIST = 0, MSTI1 = 1, etc
U32 cie1000MstpStatusBridgeMaxAge	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.9	Unsigned32	read-only	Max Age, IEEE-802.1D-2004 sect 13.23.7
CIE cie1000MstpStatusBridgeMaxHops	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.18	CIE1000Unsigned8	read-only	MaxHops (13.22.1)
U32 cie1000MstpStatusBridgeRootPathCost	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.7	Unsigned32	read-only	Root Path Cost
U32 cie1000MstpStatusBridgeRootPort	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.8	Unsigned32	read-only	Root Port
cie1000MstpStatusBridgeTable	1.3.6.1.4.1.9.9.832.1.20.1.3.1		not-accessible	This table represent the status of the bridge instances
cie1000MstpStatusBridgeTableInfoGroup	1.3.6.1.4.1.9.9.832.1.20.2.2.10			A collection of objects.
U32 cie1000MstpStatusBridgeTimeSinceTopologyChange	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.3	Unsigned32	read-only	The count in seconds of the time elapsed since the Topology Change flag was last True
T/F cie1000MstpStatusBridgeTopologyChange	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.5	TruthValue	read-only	Topology Change Flag current status
U32 cie1000MstpStatusBridgeTopologyChangeCount	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.4	Unsigned32	read-only	The count of the times the Topology Change flag parameter for the Bridge has been set since the Bridge was powered on or initialized
U32 cie1000MstpStatusBridgeTxHoldCount	1.3.6.1.4.1.9.9.832.1.20.1.3.1.1.14	Unsigned32	read-only	Hold Time / Transmission Limit, IEEE-802.1D-2004 sect 13.22
T/F cie1000MstpStatusInterfaceActive	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.4	TruthValue	read-only	Whether port is active
T/F cie1000MstpStatusInterfaceAdminEdgePort	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.16	TruthValue	read-only	adminEdgePort (18.3.3 of IEEE Std 802.1D)
NUM cie1000MstpStatusInterfaceAdminPointToPointMAC	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.20	CIE1000MstpPoint2Point	read-only	Current state of the adminPointToPointMAC parameter (6.4.3 of IEEE Std 802.1D)
T/F cie1000MstpStatusInterfaceAutoEdgePort	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.18	TruthValue	read-only	autoEdgePort (17.13.3 of IEEE Std 802.1D)
OCT cie1000MstpStatusInterfaceDesignatedBridge	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.12	OCTET STRING	read-only	Designated Bridge
U32 cie1000MstpStatusInterfaceDesignatedCost	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.11	Unsigned32	read-only	Designated Cost
OCT cie1000MstpStatusInterfaceDesignatedPort	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.13	OCTET STRING	read-only	Designated Port
OCT cie1000MstpStatusInterfaceDesignatedRoot	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.10	OCTET STRING	read-only	Designated Root
T/F cie1000MstpStatusInterfaceDisputed	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.25	TruthValue	read-only	Current value of the disputed variable for the CIST Port
T/F cie1000MstpStatusInterfaceEnabled	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.3	TruthValue	read-only	Whether port is controlled by xSTP
cie1000MstpStatusInterfaceEntry	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1		not-accessible	A MSTP interface instance set of status objects
U32 cie1000MstpStatusInterfaceHelloTime	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.15	Unsigned32	read-only	Hello Time
I32 cie1000MstpStatusInterfaceInstance	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.2	Integer32	accessible-for-notify	Bridge instance number. The CIST = 0, MSTI1 = 1, etc
NUM cie1000MstpStatusInterfaceInterfaceNo	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
T/F cie1000MstpStatusInterfaceMacOperational	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.19	TruthValue	read-only	Current state of the MAC Operational parameter (6.4.2 of IEEE Std 802.1D,)
T/F cie1000MstpStatusInterfaceOperEdgePort	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.17	TruthValue	read-only	operEdgePort (18.3.4 of IEEE Std 802.1D)
T/F cie1000MstpStatusInterfaceOperPointToPointMAC	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.21	TruthValue	read-only	Current state of the operPointToPointMAC parameter (6.4.3 of IEEE Std 802.1D)
U32 cie1000MstpStatusInterfaceParentPort	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.5	Unsigned32	read-only	Parent port if physical port is aggregated. (Otherwise 0xffff)
U32 cie1000MstpStatusInterfacePathCost	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.9	Unsigned32	read-only	Path Cost (17.16.5 of IEEE Std 802.1D)
OCT cie1000MstpStatusInterfacePortId	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.8	OCTET STRING	read-only	Unique Port identifier comprising two parts, the Port Number and the Port Priority field
STR cie1000MstpStatusInterfacePortRole	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.24	CIE1000DisplayString	read-only	Current Port Role
CIE cie1000MstpStatusInterfacePortState	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.7	CIE1000MstpPortState	read-only	Current state of the Port
T/F cie1000MstpStatusInterfaceRestrictedRole	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.22	TruthValue	read-only	Current state of the restrictedRole parameter for the Port (13.25.14)
T/F cie1000MstpStatusInterfaceRestrictedTcn	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.23	TruthValue	read-only	Current state of the restrictedTcn parameter for the Port (13.25.15)
cie1000MstpStatusInterfaceStatisticsEntry	1.3.6.1.4.1.9.9.832.1.20.1.3.3.1		not-accessible	A CIST interface set of statistics
U32 cie1000MstpStatusInterfaceStatisticsIllegalFrameReceived	1.3.6.1.4.1.9.9.832.1.20.1.3.3.1.9	Unsigned32	read-only	Number of illegal frames received and discarded in error
NUM cie1000MstpStatusInterfaceStatisticsInterfaceNo	1.3.6.1.4.1.9.9.832.1.20.1.3.3.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
U32 cie1000MstpStatusInterfaceStatisticsMstpFrameReceived	1.3.6.1.4.1.9.9.832.1.20.1.3.3.1.7	Unsigned32	read-only	Number of MSTP frames received
U32 cie1000MstpStatusInterfaceStatisticsMstpFrameXmits	1.3.6.1.4.1.9.9.832.1.20.1.3.3.1.6	Unsigned32	read-only	Number of MSTP frames transmitted
U32 cie1000MstpStatusInterfaceStatisticsRstpFrameReceived	1.3.6.1.4.1.9.9.832.1.20.1.3.3.1.5	Unsigned32	read-only	Number of RSTP frames received
U32 cie1000MstpStatusInterfaceStatisticsRstpFrameXmits	1.3.6.1.4.1.9.9.832.1.20.1.3.3.1.4	Unsigned32	read-only	Number of RSTP frames transmitted
U32 cie1000MstpStatusInterfaceStatisticsStpFrameReceived	1.3.6.1.4.1.9.9.832.1.20.1.3.3.1.3	Unsigned32	read-only	Number of STP frames received
U32 cie1000MstpStatusInterfaceStatisticsStpFrameXmits	1.3.6.1.4.1.9.9.832.1.20.1.3.3.1.2	Unsigned32	read-only	Number of STP frames transmitted
cie1000MstpStatusInterfaceStatisticsTable	1.3.6.1.4.1.9.9.832.1.20.1.3.3		not-accessible	This table represent the statistics of the CIST interfaces
cie1000MstpStatusInterfaceStatisticsTableInfoGroup	1.3.6.1.4.1.9.9.832.1.20.2.2.12			A collection of objects.
U32 cie1000MstpStatusInterfaceStatisticsTcnFrameReceived	1.3.6.1.4.1.9.9.832.1.20.1.3.3.1.11	Unsigned32	read-only	Number of TCN frames received
U32 cie1000MstpStatusInterfaceStatisticsTcnFrameXmits	1.3.6.1.4.1.9.9.832.1.20.1.3.3.1.10	Unsigned32	read-only	Number of TCN frames transmitted
U32 cie1000MstpStatusInterfaceStatisticsUnknownFramesReceived	1.3.6.1.4.1.9.9.832.1.20.1.3.3.1.8	Unsigned32	read-only	Number of unknown frames received and discarded in error
cie1000MstpStatusInterfaceTable	1.3.6.1.4.1.9.9.832.1.20.1.3.2		not-accessible	This table represent the status of the interface instances
cie1000MstpStatusInterfaceTableInfoGroup	1.3.6.1.4.1.9.9.832.1.20.2.2.11			A collection of objects.
T/F cie1000MstpStatusInterfaceTcAck	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.14	TruthValue	read-only	Topology Change Acknowledge
U32 cie1000MstpStatusInterfaceUpTime	1.3.6.1.4.1.9.9.832.1.20.1.3.2.1.6	Unsigned32	read-only	seconds of the time elapsed since the Port was last reset or initialized

RFC description

Multiple Spanning Tree Protocol implementation for Cisco IE1000 switch management and VLAN bridging.

Start monitoring Cisco IE1000 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIE1000-MSTP-MIB

What Is CIE1000-MSTP-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description