| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoPowerEthernetExtMIB | 1.3.6.1.4.1.9.9.402 | | | A MIB module for extending the POWER-ETHERNET-MIB
(RFC3621) to add objects which provide additional
management information about Power Sourcing Equipment
(PSE) not available in POWER-ETHERNET-MIB.
Glossary
Power Sourcing Equipment (PSE)
These are devices supplying electrical power to
other equipment. They are, for example, inline power
switches, inline power daughterboards and power patch
panels.
Powered Device (PD)
These are devices receiving their electrical power
supply from Power Sourcing Equipment. They are, for
example, IP telephones and wireless access points
or bridges. |
| cpeExtMIBNotifs | 1.3.6.1.4.1.9.9.402.0 | | | |
| NTF cpeExtPolicingNotif | 1.3.6.1.4.1.9.9.402.0.1 | | | This notification is generated when the 'overdraw' or
'overdrawLog' bit in value of cpeExtPsePortAdditionalStatus
is set or cleared. |
| cpeExtMIBObjects | 1.3.6.1.4.1.9.9.402.1 | | | |
| U32 cpeExtDefaultAllocation | 1.3.6.1.4.1.9.9.402.1.1 | Unsigned32 | read-write | This object indicates the default inline power allocation per
port. This is a global configuration parameter that applies
to all inline power capable ports in the system.
The system must consider this object as well as the per port
configuration object, cpeExtPsePortPwrMax, when determining
how much power to allocate to a port. The system will use the
lower of the two numbers. |
| cpeExtPsePortTable | 1.3.6.1.4.1.9.9.402.1.2 | | not-accessible | This table extends the POWER-ETHERNET-MIB pethPsePortTable
for power Ethernet ports on a Powered Sourcing Equipment
(PSE) device. |
| cpeExtPsePortEntry | 1.3.6.1.4.1.9.9.402.1.2.1 | | not-accessible | A cpeExtPsePortEntry extends a corresponding
pethPsePortTable entry. This entry displays and
controls more characteristics of a power Ethernet
port on a PSE device. |
| INT cpeExtPsePortEnable | 1.3.6.1.4.1.9.9.402.1.2.1.1 | INTEGER | read-write | This object is an extension of the pethPsePortAdminEnable
object from RFC3621. It allows the user to be more specific
when enabling the PSE functions. The states, 'auto', 'static'
and 'limit' correspond to a value of 'true' for the
pethPsePortAdminEnable object. The state 'disable' corresponds
to a value of 'false' for the pethPsePortAdminEnable object.
Setting this value to 'auto' enables Powered Device discovery
on the interface and the amount of power allocated depends on
the Powered Device discovered. If pethPsePortAdminEnable was
'false' prior to this set operation, then it will become
'true'.
Setting this value to 'static' will also enable Powered
Device discovery. However, this is different from 'auto'
in that the amount of power is pre-allocated based on the
configuration on the Power Sourcing Equipment. If
pethPsePortAdminEnable was 'false' prior to this set
operation, then it will become 'true'.
Setting this value to 'limit' enables Powered Device
discovery on the interface. The amount of power allocated
depends on the Powered Device discovered and the value
of cpeExtPsePortPwrMax. The lower value will be used.
If pethPsePortAdminEnable was 'false' prior to this set
operation, then it will become 'true'.
Setting this value to 'disable' disables the PSE functions.
The pethPsePortAdminEnable object will adopt the value of
'false' if it was 'true' prior to this set operation. When
setting the pethPsePortAdminEnable object to 'false' this
object cpeExtPsePortEnable will adopt the value of 'disable'.
If cpeExtPsePortPolicingCapable of the PSE port, or
cpeExtMainPsePwrMonitorCapable of the PSE port's
main group, has the value of 'false', this object
can only be set to 'auto', 'static' or 'disable'.
Otherwise, this object can be set to 'auto', 'static',
'limit' or 'disable'. |
| INT cpeExtPsePortDiscoverMode | 1.3.6.1.4.1.9.9.402.1.2.1.2 | INTEGER | read-only | This object indicates the discover mode used by the system to
discover the PD.
A value of 'unknown' indicates that the discover mode on the
interface is unknown.
A value of 'off' indicates that discovery is disabled on the
interface.
A value of 'ieee' indicates that the discover mode on the
interface is IEEE based.
A value of 'cisco' indicates that the discover mode on the
interface is Cisco based.
A value of 'ieeeAndCisco' indicates that the discover mode on
the interface is both IEEE and Cisco based. |
| T/F cpeExtPsePortDeviceDetected | 1.3.6.1.4.1.9.9.402.1.2.1.3 | TruthValue | read-only | This object indicates if a Powered Device (PD) has been
detected on the interface.
A value of 'true' indicates that a PD has been detected on
the interface.
A value of 'false' indicates that no PD has been detected on
the interface. |
| T/F cpeExtPsePortIeeePd | 1.3.6.1.4.1.9.9.402.1.2.1.4 | TruthValue | read-only | This object indicates whether the Powered Device attached
to the interface is an IEEE compliant Powered Device or not.
A value of 'true' indicates the attached Powered Device is
an IEEE compliant Powered Device.
A value of 'false' indicates the attached Powered Device
is not an IEEE compliant Powered Device. This also means
that the value of the corresponding object from the
pethPsePortTable, pethPsePortPowerClassifications is
irrelevant. |
| BIT cpeExtPsePortAdditionalStatus | 1.3.6.1.4.1.9.9.402.1.2.1.5 | Bits | read-only | This object is an extension of the pethPsePortDetectionStatus
object from RFC3621 and provides additional status
information.
deny: When set, the PD attached to the interface is being
denied power due to insufficient power resources on
the Power Sourcing Equipment.
overdraw: When set, the PD attached to the interface is
being denied power because the PD is trying
to consume more power than it has been
configured to consume.
overdrawLog: When set, the PD attached to the interface
is trying to consume more power than it has
been configured to consume, but is not being
denied power. |
| U32 cpeExtPsePortPwrMax | 1.3.6.1.4.1.9.9.402.1.2.1.6 | Unsigned32 | read-write | This indicates the maximum amount of power that the PSE will
make available to the PD connected to this interface. |
| U32 cpeExtPsePortPwrAllocated | 1.3.6.1.4.1.9.9.402.1.2.1.7 | Unsigned32 | read-only | This object indicates the amount of power allocated from the
PSE for the PD. |
| U32 cpeExtPsePortPwrAvailable | 1.3.6.1.4.1.9.9.402.1.2.1.8 | Unsigned32 | read-only | This object indicates the amount of power available for
the PD to use. This value may differ from the value
cpeExtPsePortPwrAllocated due to the efficiency issues
of delivering the power from the PSE to the PD.
When sufficient power is available to power a PD, this
value should be equal to the lower of the two objects,
cpeExtDefaultAllocation and cpeExtPsePortPwrMax. |
| U32 cpeExtPsePortPwrConsumption | 1.3.6.1.4.1.9.9.402.1.2.1.9 | Unsigned32 | read-only | This indicates the actual power consumption of the PD
connected to this interface. It may not necessarily
be equal to the value of cpeExtPsePortPwrAvailable. |
| U32 cpeExtPsePortMaxPwrDrawn | 1.3.6.1.4.1.9.9.402.1.2.1.10 | Unsigned32 | read-only | This indicates the maximum amount of power drawn by the PD
connected to this interface, since it was powered on. |
| ENT cpeExtPsePortEntPhyIndex | 1.3.6.1.4.1.9.9.402.1.2.1.11 | EntPhysicalIndexOrZero | read-only | The entPhysicalIndex value that uniquely identifies the
PSE port. If the PSE port does not have a corresponding
physical entry in entPhysicalTable or if the
entPhysicalTable is not supported by the management
system, this object has the value of zero. |
| T/F cpeExtPsePortPolicingCapable | 1.3.6.1.4.1.9.9.402.1.2.1.12 | TruthValue | read-only | This object indicates whether the PSE port hardware is
capable of policing the port for proper power consumption
based on the allocated value. |
| INT cpeExtPsePortPolicingEnable | 1.3.6.1.4.1.9.9.402.1.2.1.13 | INTEGER | read-write | This object allows the user to turn on or turn off the
power policing of the PSE port. If the instance value of
cpeExtPsePortPolicingCapable is 'TRUE', the user is allowed
to set this object to 'on' or 'off'. Otherwise, this
object is read-only and always has the value of 'off'. |
| INT cpeExtPsePortPolicingAction | 1.3.6.1.4.1.9.9.402.1.2.1.14 | INTEGER | read-write | This object specifies the power policing action that
the device will take on this PSE port when the real-time
power consumption exceeds its max power allocation if
the value of cpeExtPsePortPolicingEnable is 'on'.
'deny' - the device will deny the power to
the PSE port
'logOnly' - the device will not deny the power
to the PSE port |
| U32 cpeExtPsePortPwrManAlloc | 1.3.6.1.4.1.9.9.402.1.2.1.15 | Unsigned32 | read-write | This object specifies the manual power allocation that
the PSE will allocate to the PD connected to this
interface regardless of the amount requested via CDP
or IEEE.
Setting this object value to zero disables the manual
power allocation.
Warning: Misconfiguring this manual power allocation may
cause damage to the system and void the warranty. Take
precautions not to oversubscribe the power supply. |
| BIT cpeExtPsePortCapabilities | 1.3.6.1.4.1.9.9.402.1.2.1.16 | Bits | read-only | This object indicates the PSE functionality that
this port supports.
If the 'policing' BIT is set, then this PSE port is
capable of policing the port for proper power consumption
based on the allocated value.
If the 'poePlus' BIT is set, then this PSE port supports
PoE Plus functions. |
| cpeExtMainPseTable | 1.3.6.1.4.1.9.9.402.1.3 | | not-accessible | This table contains the additional information for the
main PSE group in pethMainPseTable. |
| cpeExtMainPseEntry | 1.3.6.1.4.1.9.9.402.1.3.1 | | not-accessible | A cpeExtMainPseEntry contains information about
a particular pethMainPseGroupIndex. An entry is
created by the agent when a main PSE group is added
to the pethMainPseTable. An entry is deleted by the
agent when a main PSE group is removed from the
pethMainPseTable. |
| ENT cpeExtMainPseEntPhyIndex | 1.3.6.1.4.1.9.9.402.1.3.1.1 | EntPhysicalIndexOrZero | read-only | The entPhysicalIndex value that uniquely identifies the
main PSE group. If the main PSE group does not have a
corresponding physical entry in entPhysicalTable or if
the entPhysicalTable is not supported by the management
system, then this object has the value of zero. |
| STR cpeExtMainPseDescr | 1.3.6.1.4.1.9.9.402.1.3.1.2 | SnmpAdminString | read-only | A textual string containing information about the Power
Source Equipment (PSE) group. |
| T/F cpeExtMainPsePwrMonitorCapable | 1.3.6.1.4.1.9.9.402.1.3.1.3 | TruthValue | read-only | This object indicates if the given group is capable of
monitoring the power consumption of the interfaces that
belong to the group. The value 'true' means that the
group is capable. The value 'false' means that the group
in not capable. |
| U32 cpeExtMainPseUsedPower | 1.3.6.1.4.1.9.9.402.1.3.1.4 | Unsigned32 | read-only | This object indicates used power expressed in miliwatts. |
| U32 cpeExtMainPseRemainingPower | 1.3.6.1.4.1.9.9.402.1.3.1.5 | Unsigned32 | read-only | This object indicates remaining power expressed in
miliwatts, this parameter is calculated as pethMainPsePower
minus cpeExtMainPseUsedPower. |
| cpeExtPdStatistics | 1.3.6.1.4.1.9.9.402.1.4 | | | |
| U32 cpeExtPdStatsTotalDevices | 1.3.6.1.4.1.9.9.402.1.4.1 | Unsigned32 | read-only | This object indicates the total number of the
powered devices with any power classifications
in the system.
Classification is a way to tag different terminals
on the Power over LAN network according to their
power consumption. Devices such as IP telephones,
WLAN access points and others, will be classified
according to their power requirements. |
| cpeExtPdStatsTable | 1.3.6.1.4.1.9.9.402.1.4.2 | | not-accessible | This table contains the statistics information
of the powered devices fallen into different power
classifications in the system. |
| cpeExtPdStatsEntry | 1.3.6.1.4.1.9.9.402.1.4.2.1 | | not-accessible | A cpeExtPdStatsEntry contains the statistics
information about a particular power classification
defined in cpeExtPdStatsIndex. |
| INT cpeExtPdStatsClass | 1.3.6.1.4.1.9.9.402.1.4.2.1.1 | INTEGER | not-accessible | The power classification as the index for the
statistics information for powered devices.
A value of 'cisco' indicates that the powered
devices are CISCO proprietary and their power
classification does not fall into any class
in IEEE specifications.
A value of 'class0' indicates that the power
classification of the powered devices falls into
class 0 in IEEE specifications.
A value of 'class1' indicates that the power
classification of the powered devices falls into
class 1 in IEEE specifications.
A value of 'class2' indicates that the power
classification of the powered devices falls into
class 2 in IEEE specifications.
A value of 'class3' indicates that the power
classification of the powered devices falls into
class 3 in IEEE specifications.
A value of 'class4' indicates that the power
classification of the powered devices falls into
class 4 in IEEE specifications. |
| U32 cpeExtPdStatsDeviceCount | 1.3.6.1.4.1.9.9.402.1.4.2.1.2 | Unsigned32 | read-only | This object indicates the count of the powered
devices whose power classification falls into
a specific value of cpeExtPdStatsIndex. |
| T/F cpeExtPolicingNotifEnable | 1.3.6.1.4.1.9.9.402.1.5 | TruthValue | read-write | This object is used to enable/disable the
the cpeExtPolicingNotif notification. |
| T/F cpeExtPowerPriorityEnable | 1.3.6.1.4.1.9.9.402.1.6 | TruthValue | read-write | This object is the global control of the power priority
feature on the device. 'true' indicates that the power priority
feature is globally enabled. 'false' indicates that the power
priority feature is globally disabled. |
| cpeExtPsePortLldpTable | 1.3.6.1.4.1.9.9.402.1.7 | | not-accessible | A table provides the Link Layer Discovery Protocol (LLDP)
based Data Link Layer (DLL) power classification
characteristics of PSE ports and PDs attached to them. |
| cpeExtPsePortLldpEntry | 1.3.6.1.4.1.9.9.402.1.7.1 | | not-accessible | A cpeExtPsePortLldpEntry entry contains the LLDP
based 802.3at DLL power classification characteristics for
a particular PSE and the PD attached to it.
A PSE has its entry here when all of the following conditions
are satisfied:
- The LLDP power classification is globally enabled.
- It has a PD attached.
- LLDP is the operational power negotiation protocol between
the PSE and the PD attached. |
| CPE cpeExtPsePortLldpPwrType | 1.3.6.1.4.1.9.9.402.1.7.1.1 | CpeExtLldpPwrType | read-only | The DTE Power via MDI type of the local system (PSE). |
| CPE cpeExtPsePortLldpPdPwrType | 1.3.6.1.4.1.9.9.402.1.7.1.2 | CpeExtLldpPwrType | read-only | The DTE Power via MDI type of the remote system (PD). |
| CPE cpeExtPsePortLldpPwrSrc | 1.3.6.1.4.1.9.9.402.1.7.1.3 | CpeExtLldpPwrSrc | read-only | The power source of the local system (PSE). |
| CPE cpeExtPsePortLldpPdPwrSrc | 1.3.6.1.4.1.9.9.402.1.7.1.4 | CpeExtLldpPwrSrc | read-only | The power source of the remote system (PD). |
| CPE cpeExtPsePortLldpPwrPriority | 1.3.6.1.4.1.9.9.402.1.7.1.5 | CpeExtPwrPriority | read-only | The power priority of the local system (PSE). |
| CPE cpeExtPsePortLldpPdPwrPriority | 1.3.6.1.4.1.9.9.402.1.7.1.6 | CpeExtPwrPriority | read-only | The power priority of the remote system (PD). |
| U32 cpeExtPsePortLldpPwrReq | 1.3.6.1.4.1.9.9.402.1.7.1.7 | Unsigned32 | read-only | The requested PD power value that the local
system (PSE) mirrors back to the remote system (PD). |
| U32 cpeExtPsePortLldpPdPwrReq | 1.3.6.1.4.1.9.9.402.1.7.1.8 | Unsigned32 | read-only | The PD requested power value received from
the remote system (PD). |
| U32 cpeExtPsePortLldpPwrAlloc | 1.3.6.1.4.1.9.9.402.1.7.1.9 | Unsigned32 | read-only | The PSE allocated power value for the remote
system (PD). |
| U32 cpeExtPsePortLldpPdPwrAlloc | 1.3.6.1.4.1.9.9.402.1.7.1.10 | Unsigned32 | read-only | The PSE allocated power value received from the
remote system (PD). |
| CPE cpeExtPsePortLldpPwrClass | 1.3.6.1.4.1.9.9.402.1.7.1.11 | CpeExtLldpPwrClassOrZero | read-only | The PSE power classification sent to the remote PD via MDI TLV
in LLDP Protocol. |
| CPE cpeExtPsePortLldpPdPwrClass | 1.3.6.1.4.1.9.9.402.1.7.1.12 | CpeExtLldpPwrClassOrZero | read-only | This power classification received from the remote
system (PD). |
| BIT cpeExtPsePortLldpPdPwrSupport | 1.3.6.1.4.1.9.9.402.1.7.1.13 | Bits | read-only | This object indicates the power support mode received
from the remote PD via MDI TLV in LLDP protocol.
'portClass' - This bit is set if the port is
operating as PSE. Otherwise, it is
operating as PD.
'pseMdiPwrSupport' - This bit is set if power is supported in
MDI TLV.
'pseMdiPwrState' - This bit is set if power is enabled.
'psePairCtrlAbility' - This bit is set if pair selection can
be controlled. |
| INT cpeExtPsePortLldpPdPwrPairsOrZero | 1.3.6.1.4.1.9.9.402.1.7.1.14 | INTEGER | read-only | This object indicates the pinout pairs in use received
from the remote PD via MDI TLV in LLDP Protocol.
'unknown' - information is not available
'signal' - the signal pairs are in use.
'spare' - the spare pairs are in use. |
| cpeExtMIBConformance | 1.3.6.1.4.1.9.9.402.2 | | | |
| cpeExtMIBCompliances | 1.3.6.1.4.1.9.9.402.2.1 | | | |
| cpeExtMIBCompliance | 1.3.6.1.4.1.9.9.402.2.1.1 | | | The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB. |
| cpeExtMIBCompliance2 | 1.3.6.1.4.1.9.9.402.2.1.2 | | | The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB. |
| cpeExtMIBCompliance3 | 1.3.6.1.4.1.9.9.402.2.1.3 | | | The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB. |
| cpeExtMIBCompliance4 | 1.3.6.1.4.1.9.9.402.2.1.4 | | | The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB. |
| cpeExtMIBCompliance5 | 1.3.6.1.4.1.9.9.402.2.1.5 | | | The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB. |
| cpeExtMIBCompliance6 | 1.3.6.1.4.1.9.9.402.2.1.6 | | | The compliance statement for the
CISCO-POWER-ETHERNET-EXT-MIB. |
| cpeExtMIBGroups | 1.3.6.1.4.1.9.9.402.2.2 | | | |
| cpeExtPsePortGroup | 1.3.6.1.4.1.9.9.402.2.2.1 | | | This group provides information and configuration objects
in addition to those provided in the POWER-ETHERNET-MIB
(RFC3621). |
| cpeExtPsePortGlobalConfigGroup | 1.3.6.1.4.1.9.9.402.2.2.2 | | | This is a collection of objects which provide global
configuration of the PSE interfaces. |
| cpeExtPsePortPwrMonitorGroup | 1.3.6.1.4.1.9.9.402.2.2.3 | | | This is a collection of objects which provide power
monitoring on PD's connected to the PSE interfaces. |
| cpeExtMainPseGroup | 1.3.6.1.4.1.9.9.402.2.2.4 | | | This is a collection of objects which provide
additional information for the PSE group.
cpeExtMainPseGroup object is superseded by cpeExtMainPseGroup2,
and cpeExtPseGrpPwrGroup. |
| cpeExtPortEntityIndexGroup | 1.3.6.1.4.1.9.9.402.2.2.5 | | | This is a collection of objects which provide
entity physical index information for PSE port. |
| cpeExtPortPolicingGroup | 1.3.6.1.4.1.9.9.402.2.2.6 | | | This is a collection of objects which provide
the hardware power consumption policing information
for PSE port. |
| cpeExtPdStatsGroup | 1.3.6.1.4.1.9.9.402.2.2.7 | | | This is a collection of objects which provide
the statistics information for powered devices. |
| cpeExtMainPseGroup2 | 1.3.6.1.4.1.9.9.402.2.2.8 | | | This is a collection of objects which provide
additional information to identify the PSE group. |
| cpeExtPseGrpPwrGroup | 1.3.6.1.4.1.9.9.402.2.2.9 | | | This is a collection of objects which provide
power monitoring information for the PSE group. |
| cpeExtPortPolicingActionGroup | 1.3.6.1.4.1.9.9.402.2.2.10 | | | This is a collection of objects which provide control
of the power policing action of the PSE port. |
| cpeExtPortPwrManAllocGroup | 1.3.6.1.4.1.9.9.402.2.2.11 | | | This is a collection of objects which provide manual
power allocation for the PSE port. |
| cpeExtPolicingNotifEnableGroup | 1.3.6.1.4.1.9.9.402.2.2.12 | | | A collection of object that provides control over
power consumption policing status notification. |
| cpeExtPolicingNotifGroup | 1.3.6.1.4.1.9.9.402.2.2.13 | | | This is a collection of notifications related to
power consumption policing information for PSE ports. |
| cpeExtPowerPriorityGroup | 1.3.6.1.4.1.9.9.402.2.2.14 | | | A collection of objects which provides global
control of power priority feature. |
| cpeExtPsePortLldpGroup | 1.3.6.1.4.1.9.9.402.2.2.15 | | | A collection of objects which provides the
information about the LLDP based Data Link Layer
power classification characteristics of power Ethernet
PSE ports. |
| cpeExtPsePortCapabilitiesGroup | 1.3.6.1.4.1.9.9.402.2.2.16 | | | A collection of objects which provides PSE
port capabilities. |
| cpeExtPsePortLldpPowerGroup | 1.3.6.1.4.1.9.9.402.2.2.17 | | | A collection of objects which provide Power information
via MDI TLV in LLDP Protocol. |
| cpeExtPseInfoPwrGroup | 1.3.6.1.4.1.9.9.402.2.2.18 | | | This is a collection of objects which provide
used and remaining power information for the PSE group. |
