All MIBs › CAMSCS-MIB
Category: Cisco Devices, Vendor: CA Technologies
Description: Manages Cisco/CA multi-service computing platform resources including compute, storage, and network service parameters.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CAMSCS-MIB?
CAMSCS-MIB is a vendor-specific MIB, per its short description, associated with Cisco/CA multi-service computing platform resource management, covering compute, storage, and network service parameters on a converged services chassis. No module description or sample objects were provided in the source data, so its precise object structure cannot be independently verified beyond the short description. Presumably it would expose resource allocation and utilization data across compute, storage, and networking domains for a multi-service platform, aligning it with hardware/software status monitoring such as resource utilization and service availability. Any dependency on other MIBs cannot be confirmed without further object detail. It would be deployed in environments running Cisco or CA converged multi-service computing platforms where compute, storage, and network resources are jointly managed. Network engineers evaluating or troubleshooting this functionality can download the CAMSCS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CAMSCS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco/CA multi-service computing platform
Monitoring Examples
No sample_objects or module_desc were available for this MIB, so no specific object or table names can be cited with confidence. Based on the short description alone, a plausible use would be polling resource allocation/utilization counters spanning compute, storage, and network services on the platform, but without concrete object names this cannot be described as a verified monitoring scenario.
What Can Be Monitored
- compute resource utilization
- storage resource utilization
- network service parameters
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| Gauge | |
| enterprises |
From RFC1213-MIB
| DisplayString |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| applications | 1.3.6.1.4.1.546.16 | |||
| camscsaim | 1.3.6.1.4.1.546.16.51 | |||
| empire | 1.3.6.1.4.1.546 | |||
| INT mscsAimCfgagentpollinterval | 1.3.6.1.4.1.546.16.51.3.1.5 | INTEGER | read-write | Poll Interval for the agent. |
| mscsAimCfgGeneralGroup | 1.3.6.1.4.1.546.16.51.3.1 | |||
| STR mscsAimCfglastupdatetime | 1.3.6.1.4.1.546.16.51.3.1.4 | DisplayString | read-only | Time the MIB was last updated. |
| STR mscsAimCfgname | 1.3.6.1.4.1.546.16.51.3.1.1 | DisplayString | read-only | The agent's name. |
| STR mscsAimCfgstarttime | 1.3.6.1.4.1.546.16.51.3.1.3 | DisplayString | read-only | Time the agent was started. |
| STR mscsAimCfgversion | 1.3.6.1.4.1.546.16.51.3.1.2 | DisplayString | read-only | Version of the agent. |
| mscsAimConfigGroup | 1.3.6.1.4.1.546.16.51.3 | |||
| mscsAimGroup | 1.3.6.1.4.1.546.16.51.1 | |||
| NTF mscsAimInstanceAddedTrap | 1.3.6.1.4.1.546.1.1.0.165100 | This trap is sent when a new Instance/Server is added. Parameters: mscsAimInstanceIndex mscsAimInstanceName mscsAimInstanceRowStatus mscsAimInstanceDataStatus | ||
| INT mscsAimInstanceCount | 1.3.6.1.4.1.546.16.51.1.1 | INTEGER | read-only | Number of instances in mscsAimInstanceTable. |
| INT mscsAimInstanceDataStatus | 1.3.6.1.4.1.546.16.51.1.2.1.6 | INTEGER | read-only | The status of data of the MSCS Instance (Server), i.e. status of Aim caches for the instance. ready(1) - data are ready in Aim cache, caches were populated notReady(2) - data are Not ready, caches were not populated yet hostUnreachable(3) - MSCS host unreachable, data are kept in Aim caches hostIsSlave(4) - MSCS host is a slave server, data are kept in Aim caches authenticationFailed(5) - authentication failed for host, data are kept in Aim caches unknownError(6) - unknow error, data are kept in Aim caches |
| NTF mscsAimInstanceDataStatusChanged | 1.3.6.1.4.1.546.1.1.0.165102 | This trap is sent when Instance/Server Data Status is changed. Parameters: mscsAimInstanceIndex mscsAimInstanceName mscsAimInstanceRowStatus mscsAimInstanceDataStatus | ||
| mscsAimInstanceEntry | 1.3.6.1.4.1.546.16.51.1.2.1 | not-accessible | The MSCS instances table entry. | |
| INT mscsAimInstanceIndex | 1.3.6.1.4.1.546.16.51.1.2.1.1 | INTEGER | read-only | The unique index of the instance. |
| STR mscsAimInstanceName | 1.3.6.1.4.1.546.16.51.1.2.1.2 | DisplayString | read-write | Name of the instance |
| STR mscsAimInstancePassword | 1.3.6.1.4.1.546.16.51.1.2.1.4 | DisplayString | read-write | Password for the user name provided to connect to the instance. |
| NTF mscsAimInstanceRemovedTrap | 1.3.6.1.4.1.546.1.1.0.165101 | This trap is sent when an Instance/Server is removed. Parameters: mscsAimInstanceIndex mscsAimInstanceName mscsAimInstanceRowStatus mscsAimInstanceDataStatus | ||
| INT mscsAimInstanceRowStatus | 1.3.6.1.4.1.546.16.51.1.2.1.5 | INTEGER | read-write | The status of this monitor entry according to the Textual Conventions for SNMPv2 (see RFC 1443). active(1) - the row is available for usage notInService(2) - setting to this value disables usage of the row notReady(3) - an error occurred during usage of the row createAndGo(4) - setting to this value creates the row with row status set to active(1) createAndWait(5) - setting to this value creates the row with row status set to notInService(2) destroy(6) - setting to this value deletes the row |
| mscsAimInstanceTable | 1.3.6.1.4.1.546.16.51.1.2 | not-accessible | A table containing the MSCS instances. | |
| INT mscsAimInstanceUnusedIndex | 1.3.6.1.4.1.546.16.51.1.3 | INTEGER | read-only | An SNMP GET of this attribute returns an unused Instance UID. This is normally used to expedite safe table row creation. |
| STR mscsAimInstanceUserName | 1.3.6.1.4.1.546.16.51.1.2.1.3 | DisplayString | read-write | User name for connecting to the instance. |
| NTF mscsAimResourceGroupMigration | 1.3.6.1.4.1.546.1.1.0.165103 | This trap is sent when a resource group is migrated. Parameters: mscsAimStatResourceGroupIndex mscsAimStatResourceGroupName mscsAimStatResourceGroupNodeIndex mscsAimStatResourceGroupNodeName mscsAimStatResourceGroupPreviousNodeIndex mscsAimStatResourceGroupPreviousNodeName mscsAimStatResourceGroupInstanceName mscsAimStatResourceGroupClusterIndex | ||
| INT mscsAimStatClusterBackupInProgress | 1.3.6.1.4.1.546.16.51.2.1.2.1.5 | INTEGER | read-only | Indicates whether a backup is in progress. This property is not supported before Windows Server 2008. |
| INT mscsAimStatClusterCount | 1.3.6.1.4.1.546.16.51.2.1.1 | INTEGER | read-only | |
| CTR mscsAimStatClusterCryptoCheckpointsRestored | 1.3.6.1.4.1.546.16.51.2.1.2.1.29 | Counter | read-only | Cluster performance counter. |
| CTR mscsAimStatClusterCryptoCheckpointsSaved | 1.3.6.1.4.1.546.16.51.2.1.2.1.30 | Counter | read-only | Cluster performance counter. |
| CTR mscsAimStatClusterDatabaseUpdateMessages | 1.3.6.1.4.1.546.16.51.2.1.2.1.34 | Counter | read-only | Cluster performance counter. |
| STR mscsAimStatClusterDescription | 1.3.6.1.4.1.546.16.51.2.1.2.1.4 | SnmpAdminString | read-only | The description of the cluster |
| INT mscsAimStatClusterEnableSharedVolumes | 1.3.6.1.4.1.546.16.51.2.1.2.1.9 | INTEGER | read-only | Indicates if cluster shared volumes on this cluster are enabled. This property is not supported before Windows Server 2008 R2. |
| mscsAimStatClusterEntry | 1.3.6.1.4.1.546.16.51.2.1.2.1 | not-accessible | ||
| INT mscsAimStatClusterFixQuorum | 1.3.6.1.4.1.546.16.51.2.1.2.1.10 | INTEGER | read-only | Specifies if the cluster is in a fix quorum state. This property is not supported before Windows Server 2008 R2. |
| CTR mscsAimStatClusterFlushes | 1.3.6.1.4.1.546.16.51.2.1.2.1.33 | Counter | read-only | Cluster performance counter. |
| mscsAimStatClusterGroup | 1.3.6.1.4.1.546.16.51.2.1 | |||
| INT mscsAimStatClusterGroupWaitDelay | 1.3.6.1.4.1.546.16.51.2.1.2.1.6 | INTEGER | read-only | Maximum time in seconds that a group waits for its preferred node to come online during cluster startup before coming online on a different node. This property is not supported before Windows Server 2008 R2. |
| INT mscsAimStatClusterIndex | 1.3.6.1.4.1.546.16.51.2.1.2.1.1 | INTEGER | read-only | The index of this table row |
| STR mscsAimStatClusterInstanceName | 1.3.6.1.4.1.546.16.51.2.1.2.1.2 | DisplayString | read-only | The instance this table row belongs to. |
| STR mscsAimStatClusterIPv4Addresses | 1.3.6.1.4.1.546.16.51.2.1.2.1.11 | DisplayString | read-only | Specifies the cluster's IPv4 network address(es). |
| STR mscsAimStatClusterIPv6Addresses | 1.3.6.1.4.1.546.16.51.2.1.2.1.12 | DisplayString | read-only | Specifies the cluster's IPv4 network address(es) |
| INT mscsAimStatClusterLogLevel | 1.3.6.1.4.1.546.16.51.2.1.2.1.7 | INTEGER | read-only | Controls the level of cluster logging. This property is not supported before Windows Server 2008. |
| GAU mscsAimStatClusterLogSize | 1.3.6.1.4.1.546.16.51.2.1.2.1.8 | Gauge | read-only | Controls the maximum size (in MB) of the cluster log files on each of the nodes. This property is not supported before Windows Server 2008. |
| INT mscsAimStatClusterMaxNumberOfNodes | 1.3.6.1.4.1.546.16.51.2.1.2.1.13 | INTEGER | read-only | Indicates the maximum number of nodes that can participate in a cluster. A value of zero indicates that an unlimited number of nodes can participate in the cluster. |
| GAU mscsAimStatClusterMessagesOutstanding | 1.3.6.1.4.1.546.16.51.2.1.2.1.36 | Gauge | read-only | Cluster performance counter. |
| CTR mscsAimStatClusterMessagesSent | 1.3.6.1.4.1.546.16.51.2.1.2.1.37 | Counter | read-only | Cluster performance counter. |
| STR mscsAimStatClusterName | 1.3.6.1.4.1.546.16.51.2.1.2.1.3 | DisplayString | read-only | Specifies the name of the cluster. |
| INT mscsAimStatClusternodeResourceFailure | 1.3.6.1.4.1.546.16.51.2.1.2.1.19 | INTEGER | read-only | Number of total encountered resource failures. |
| INT mscsAimStatClusternodeResourcesOnline | 1.3.6.1.4.1.546.16.51.2.1.2.1.20 | INTEGER | read-only | Number of currently online Resources |
| INT mscsAimStatClusterQuorumArbitrationTimeMax | 1.3.6.1.4.1.546.16.51.2.1.2.1.14 | INTEGER | read-only | Controls the maximum time in seconds necessary to decide the Quorum owner node. |
| INT mscsAimStatClusterQuorumArbitrationTimeMin | 1.3.6.1.4.1.546.16.51.2.1.2.1.15 | INTEGER | read-only | Controls the minimum time in seconds necessary to decide the Quorum owner node. |
| STR mscsAimStatClusterQuorumPath | 1.3.6.1.4.1.546.16.51.2.1.2.1.16 | SnmpAdminString | read-only | Maintains quorum files. This property is not supported before Windows Server 2008. |
| STR mscsAimStatClusterQuorumType | 1.3.6.1.4.1.546.16.51.2.1.2.1.17 | SnmpAdminString | read-only | Gets the current quorum type. This property is not supported before Windows Server 2008. The following are the possible values: Majority No Majority |
| INT mscsAimStatClusterQuorumTypeValue | 1.3.6.1.4.1.546.16.51.2.1.2.1.18 | INTEGER | read-only | Value of the current quorum type. |
| CTR mscsAimStatClusterRegistryCheckpointsRestored | 1.3.6.1.4.1.546.16.51.2.1.2.1.31 | Counter | read-only | Cluster performance counter. |
| CTR mscsAimStatClusterRegistryCheckpointsSaved | 1.3.6.1.4.1.546.16.51.2.1.2.1.32 | Counter | read-only | Cluster performance counter. |
| CTR mscsAimStatClusterResourceControls | 1.3.6.1.4.1.546.16.51.2.1.2.1.25 | Counter | read-only | Cluster performance counter, it tells how many resource controls the resources of the given type are handling on a node |
| CTR mscsAimStatClusterResourceFailureAccessViolation | 1.3.6.1.4.1.546.16.51.2.1.2.1.26 | Counter | read-only | Cluster performance counter, it tells how many times a resource of this type caused the Resource Host Monitor to get terminated due to a failure of a resource of this type |
| CTR mscsAimStatClusterResourceFailureDeadlock | 1.3.6.1.4.1.546.16.51.2.1.2.1.27 | Counter | read-only | Cluster performance counter. |
| CTR mscsAimStatClusterResourceTypeControls | 1.3.6.1.4.1.546.16.51.2.1.2.1.28 | Counter | read-only | Cluster performance counter, it tells how many resource type controls the resource DLL of the given type is handling on a node |
| STR mscsAimStatClusterSharedVolumesRoot | 1.3.6.1.4.1.546.16.51.2.1.2.1.21 | SnmpAdminString | read-only | Root directory from which the cluster shared volumes are linked. This property is not supported before Windows Server 2008 R2. |
| INT mscsAimStatClusterShutdownTimeoutInMinutes | 1.3.6.1.4.1.546.16.51.2.1.2.1.22 | INTEGER | read-only | The maximum time in minutes allowed for cluster resources to come offline during cluster service shutdown. This property is not supported before Windows Server 2008 R2. |
| mscsAimStatClusterTable | 1.3.6.1.4.1.546.16.51.2.1.2 | not-accessible | ||
| CTR mscsAimStatClusterUpdateMessages | 1.3.6.1.4.1.546.16.51.2.1.2.1.35 | Counter | read-only | Cluster performance counter. |
| INT mscsAimStatClusterWitnessDatabaseWriteTimeout | 1.3.6.1.4.1.546.16.51.2.1.2.1.23 | INTEGER | read-only | The maximum time in seconds that a cluster database write to a witness can take before the write is abandoned. This property is not supported before Windows Server 2008. |
| GAU mscsAimStatClusterWitnessRestartInterval | 1.3.6.1.4.1.546.16.51.2.1.2.1.24 | Gauge | read-only | The witness restart interval in minutes. This property is not supported before Windows Server 2008. |
| INT mscsAimStatCSVBackupState | 1.3.6.1.4.1.546.16.51.2.9.2.1.6 | INTEGER | read-only | The backup state of the cluster shared volume. Possible values: none (0) inProgress (1) |
| INT mscsAimStatCSVClusterIndex | 1.3.6.1.4.1.546.16.51.2.9.2.1.3 | INTEGER | read-only | The index of the cluster this table row belongs to. |
| INT mscsAimStatCSVCount | 1.3.6.1.4.1.546.16.51.2.9.1 | INTEGER | read-only | The number of rows in the table. |
| STR mscsAimStatCSVDescription | 1.3.6.1.4.1.546.16.51.2.9.2.1.5 | SnmpAdminString | read-only | The description of the cluster shared volume. |
| mscsAimStatCSVEntry | 1.3.6.1.4.1.546.16.51.2.9.2.1 | not-accessible | ||
| INT mscsAimStatCSVFaultState | 1.3.6.1.4.1.546.16.51.2.9.2.1.7 | INTEGER | read-only | The fault state of the cluster shared volume. Possible values: noFaults (0) noDirectIO (1) noAccess (2) maintenance (4) |
| mscsAimStatCSVGroup | 1.3.6.1.4.1.546.16.51.2.9 | |||
| INT mscsAimStatCSVIndex | 1.3.6.1.4.1.546.16.51.2.9.2.1.1 | INTEGER | read-only | The numeric index of this row. |
| STR mscsAimStatCSVInstanceName | 1.3.6.1.4.1.546.16.51.2.9.2.1.2 | DisplayString | read-only | The instance this table row belongs to. |
| STR mscsAimStatCSVName | 1.3.6.1.4.1.546.16.51.2.9.2.1.4 | SnmpAdminString | read-only | The name of the cluster shared volume. |
| mscsAimStatCSVTable | 1.3.6.1.4.1.546.16.51.2.9.2 | not-accessible | ||
| STR mscsAimStatCSVVolumeName | 1.3.6.1.4.1.546.16.51.2.9.2.1.8 | SnmpAdminString | read-only | The device Id of the cluster shared volume. |
| STR mscsAimStatCSVVolumeOffset | 1.3.6.1.4.1.546.16.51.2.9.2.1.9 | DisplayString | read-only | The volume offset of the cluster shared volume. |
| INT mscsAimStatDiskClusterIndex | 1.3.6.1.4.1.546.16.51.2.8.2.1.3 | INTEGER | read-only | The index of the cluster this table row belongs to. |
| INT mscsAimStatDiskCount | 1.3.6.1.4.1.546.16.51.2.8.1 | INTEGER | read-only | The number of rows in the table. |
| STR mscsAimStatDiskDescription | 1.3.6.1.4.1.546.16.51.2.8.2.1.5 | SnmpAdminString | read-only | The description of the disk. |
| mscsAimStatDiskGroup | 1.3.6.1.4.1.546.16.51.2.8 | |||
| STR mscsAimStatDiskID | 1.3.6.1.4.1.546.16.51.2.8.2.1.6 | DisplayString | read-only | The ID of the disk. |
| INT mscsAimStatDiskIndex | 1.3.6.1.4.1.546.16.51.2.8.2.1.1 | INTEGER | read-only | The numeric index of this row. |
| STR mscsAimStatDiskInstanceName | 1.3.6.1.4.1.546.16.51.2.8.2.1.2 | DisplayString | read-only | The instance this table row belongs to. |
| STR mscsAimStatDiskName | 1.3.6.1.4.1.546.16.51.2.8.2.1.4 | SnmpAdminString | read-only | The name of the disk. |
| INT mscsAimStatDiskScsiBus | 1.3.6.1.4.1.546.16.51.2.8.2.1.8 | INTEGER | read-only | The SCSI bus of the disk. |
| INT mscsAimStatDiskScsiLUN | 1.3.6.1.4.1.546.16.51.2.8.2.1.10 | INTEGER | read-only | The SCSI LUN of the disk. |
| INT mscsAimStatDiskScsiPort | 1.3.6.1.4.1.546.16.51.2.8.2.1.7 | INTEGER | read-only | The SCSI port number of the disk. |
| INT mscsAimStatDiskScsiTargetID | 1.3.6.1.4.1.546.16.51.2.8.2.1.9 | INTEGER | read-only | The SCSI target ID of the disk. |
| mscsAimStatDisksEntry | 1.3.6.1.4.1.546.16.51.2.8.2.1 | not-accessible | ||
| INT mscsAimStatDiskSignature | 1.3.6.1.4.1.546.16.51.2.8.2.1.11 | INTEGER | read-only | The signature of the disk. |
| mscsAimStatDisksTable | 1.3.6.1.4.1.546.16.51.2.8.2 | not-accessible | ||
| mscsAimStatGroup | 1.3.6.1.4.1.546.16.51.2 | |||
| STR mscsAimStatNetworkAddress | 1.3.6.1.4.1.546.16.51.2.6.2.1.6 | DisplayString | read-only | The address for the entire network or subnet. |
| STR mscsAimStatNetworkAddressMask | 1.3.6.1.4.1.546.16.51.2.6.2.1.7 | DisplayString | read-only | The mask that distinguishes the network and host portions of an address. |
| INT mscsAimStatNetworkAutoMetric | 1.3.6.1.4.1.546.16.51.2.6.2.1.8 | INTEGER | read-only | Determines whether the metric is to be set by the user or determined automatically. |
| INT mscsAimStatNetworkCharacteristics | 1.3.6.1.4.1.546.16.51.2.6.2.1.9 | INTEGER | read-only | Provides access to the characteristics set for the network. |
| INT mscsAimStatNetworkClusterIndex | 1.3.6.1.4.1.546.16.51.2.6.2.1.3 | INTEGER | read-only | The index of the cluster this table row belongs to. |
| INT mscsAimStatNetworkCount | 1.3.6.1.4.1.546.16.51.2.6.1 | INTEGER | read-only | The number of rows in the table. |
| STR mscsAimStatNetworkDescription | 1.3.6.1.4.1.546.16.51.2.6.2.1.5 | SnmpAdminString | read-only | The description of the network. |
| mscsAimStatNetworkEntry | 1.3.6.1.4.1.546.16.51.2.6.2.1 | not-accessible | ||
| mscsAimStatNetworkGroup | 1.3.6.1.4.1.546.16.51.2.6 | |||
| INT mscsAimStatNetworkIndex | 1.3.6.1.4.1.546.16.51.2.6.2.1.1 | INTEGER | read-only | The numeric index of this row. |
| STR mscsAimStatNetworkInstanceName | 1.3.6.1.4.1.546.16.51.2.6.2.1.2 | DisplayString | read-only | The instance this table row belongs to. |
| STR mscsAimStatNetworkInterfaceAdapter | 1.3.6.1.4.1.546.16.51.2.7.2.1.8 | SnmpAdminString | read-only | The name that is used to uniquely identify the network interface in the cluster. |
| STR mscsAimStatNetworkInterfaceAddress | 1.3.6.1.4.1.546.16.51.2.7.2.1.9 | SnmpAdminString | read-only | The primary network address that the node uses for the network interface. |
| INT mscsAimStatNetworkInterfaceBytesReceivedPersec | 1.3.6.1.4.1.546.16.51.2.7.2.1.10 | INTEGER | read-only | Total bytes per second received by this adapter |
| INT mscsAimStatNetworkInterfaceBytesSentPersec | 1.3.6.1.4.1.546.16.51.2.7.2.1.11 | INTEGER | read-only | Total bytes per second sent by this adapter |
| INT mscsAimStatNetworkInterfaceBytesTotalPersec | 1.3.6.1.4.1.546.16.51.2.7.2.1.12 | INTEGER | read-only | Total bytes per second handled by this adapter |
| INT mscsAimStatNetworkInterfaceCharacteristics | 1.3.6.1.4.1.546.16.51.2.7.2.1.13 | INTEGER | read-only | The characteristics set for the network interface. |
| INT mscsAimStatNetworkInterfaceClusterIndex | 1.3.6.1.4.1.546.16.51.2.7.2.1.3 | INTEGER | read-only | The index of the cluster this table row belongs to. |
| INT mscsAimStatNetworkInterfaceCount | 1.3.6.1.4.1.546.16.51.2.7.1 | INTEGER | read-only | The number of rows in the table. |
| STR mscsAimStatNetworkInterfaceDescription | 1.3.6.1.4.1.546.16.51.2.7.2.1.7 | SnmpAdminString | read-only | The description of this network interface. |
| STR mscsAimStatNetworkInterfaceDeviceID | 1.3.6.1.4.1.546.16.51.2.7.2.1.14 | DisplayString | read-only | An address or other identifying information that uniquely identifies the network interface. |
| INT mscsAimStatNetworkInterfaceDhcpEnabled | 1.3.6.1.4.1.546.16.51.2.7.2.1.15 | INTEGER | read-only | Indicates if DHCP is enabled on the network interface. This property is not supported on Windows Server 2003. |
| mscsAimStatNetworkInterfaceEntry | 1.3.6.1.4.1.546.16.51.2.7.2.1 | not-accessible | ||
| mscsAimStatNetworkInterfaceGroup | 1.3.6.1.4.1.546.16.51.2.7 | |||
| INT mscsAimStatNetworkInterfaceIndex | 1.3.6.1.4.1.546.16.51.2.7.2.1.1 | INTEGER | read-only | The numeric index of this row. |
| STR mscsAimStatNetworkInterfaceInstanceName | 1.3.6.1.4.1.546.16.51.2.7.2.1.2 | DisplayString | read-only | The instance this table row belongs to. |
| STR mscsAimStatNetworkInterfaceIPv4Addresses | 1.3.6.1.4.1.546.16.51.2.7.2.1.16 | DisplayString | read-only | The IPv4 addresses currently assigned to this network interface. |
| STR mscsAimStatNetworkInterfaceIPv6Addresses | 1.3.6.1.4.1.546.16.51.2.7.2.1.17 | DisplayString | read-only | The IPv6 addresses currently assigned to this network interface. |
| STR mscsAimStatNetworkInterfaceMACAddress | 1.3.6.1.4.1.546.16.51.2.7.2.1.18 | DisplayString | read-only | The MAC address of this network interface. |
| STR mscsAimStatNetworkInterfaceName | 1.3.6.1.4.1.546.16.51.2.7.2.1.6 | SnmpAdminString | read-only | The name of this network interface. |
| INT mscsAimStatNetworkInterfaceNetworkIndex | 1.3.6.1.4.1.546.16.51.2.7.2.1.4 | INTEGER | read-only | The index of the network this table row belongs to. |
| INT mscsAimStatNetworkInterfaceNodeIndex | 1.3.6.1.4.1.546.16.51.2.7.2.1.5 | INTEGER | read-only | The index of the node in which the network interface is installed. This property is not supported on Windows 2003 |
| INT mscsAimStatNetworkInterfaceState | 1.3.6.1.4.1.546.16.51.2.7.2.1.19 | INTEGER | read-only | The current state of the network interface. Possible values: StateUnknown (-1) Unavailable (0) Failed (1) Unreachable (2) Up (3) |
| STR mscsAimStatNetworkInterfaceSystemName | 1.3.6.1.4.1.546.16.51.2.7.2.1.20 | DisplayString | read-only | The scoping system's Name |
| mscsAimStatNetworkInterfaceTable | 1.3.6.1.4.1.546.16.51.2.7.2 | not-accessible | ||
| STR mscsAimStatNetworkIPv4Addresses | 1.3.6.1.4.1.546.16.51.2.6.2.1.10 | DisplayString | read-only | The IPv4 addresses currently assigned to this network. |
| STR mscsAimStatNetworkIPv4PrefixLengths | 1.3.6.1.4.1.546.16.51.2.6.2.1.11 | DisplayString | read-only | The prefix lengths of the IPv4 addresses currently assigned to this network. |
| STR mscsAimStatNetworkIPv6Addresses | 1.3.6.1.4.1.546.16.51.2.6.2.1.12 | DisplayString | read-only | The IPv6 addresses currently assigned to this network. |
| STR mscsAimStatNetworkIPv6PrefixLengths | 1.3.6.1.4.1.546.16.51.2.6.2.1.13 | DisplayString | read-only | The prefix lengths of the IPv6 addresses currently assigned to this network. |
| INT mscsAimStatNetworkMetric | 1.3.6.1.4.1.546.16.51.2.6.2.1.14 | INTEGER | read-only | The metric of a cluster network (networks with lower values are used first). If this value is set, then the AutoMetric property is set to false. |
| STR mscsAimStatNetworkName | 1.3.6.1.4.1.546.16.51.2.6.2.1.4 | SnmpAdminString | read-only | The name of the network. |
| INT mscsAimStatNetworkRole | 1.3.6.1.4.1.546.16.51.2.6.2.1.15 | INTEGER | read-only | Provides access to the network's Role property. Possible values: none (0) cluster (1) client (2) both (3) |
| INT mscsAimStatNetworkState | 1.3.6.1.4.1.546.16.51.2.6.2.1.16 | INTEGER | read-only | The current state of the network. Possible values: StateUnknown (-1) StateUnavailable (0) Down (1) Partitioned (2) Up (3) |
| mscsAimStatNetworkTable | 1.3.6.1.4.1.546.16.51.2.6.2 | not-accessible | ||
| INT mscsAimStatNodeBuildNumber | 1.3.6.1.4.1.546.16.51.2.2.2.1.6 | INTEGER | read-only | The node's BuildNumber property. |
| INT mscsAimStatNodeClusterIndex | 1.3.6.1.4.1.546.16.51.2.2.2.1.3 | INTEGER | read-only | The index of the cluster this table row belongs to. |
| STR mscsAimStatNodeClusterName | 1.3.6.1.4.1.546.16.51.2.2.2.1.24 | DisplayString | read-only | Name of the cluster this node belongs to. |
| INT mscsAimStatNodeCount | 1.3.6.1.4.1.546.16.51.2.2.1 | INTEGER | read-only | |
| STR mscsAimStatNodeCSDVersion | 1.3.6.1.4.1.546.16.51.2.2.2.1.7 | DisplayString | read-only | The most recent service pack installed on the node, if any. |
| STR mscsAimStatNodeDescription | 1.3.6.1.4.1.546.16.51.2.2.2.1.5 | SnmpAdminString | read-only | The description of this node. |
| mscsAimStatNodeEntry | 1.3.6.1.4.1.546.16.51.2.2.2.1 | not-accessible | ||
| mscsAimStatNodeGroup | 1.3.6.1.4.1.546.16.51.2.2 | |||
| INT mscsAimStatNodeHostCPUUtilizationPercent | 1.3.6.1.4.1.546.16.51.2.2.2.1.10 | INTEGER | read-only | The CPU utilization in percent. |
| INT mscsAimStatNodeHostMemoryAvailableMB | 1.3.6.1.4.1.546.16.51.2.2.2.1.9 | INTEGER | read-only | The available memory on this node (in MB). |
| INT mscsAimStatNodeHostMemoryTotalMB | 1.3.6.1.4.1.546.16.51.2.2.2.1.8 | INTEGER | read-only | The total amount of memory available on this node (in MB) |
| INT mscsAimStatNodeHostMemoryUtilizationPercent | 1.3.6.1.4.1.546.16.51.2.2.2.1.23 | INTEGER | read-only | Memory utilization in percent. |
| INT mscsAimStatNodeIndex | 1.3.6.1.4.1.546.16.51.2.2.2.1.1 | INTEGER | read-only | |
| STR mscsAimStatNodeInstanceName | 1.3.6.1.4.1.546.16.51.2.2.2.1.2 | DisplayString | read-only | The instance this table row belongs to. |
| CTR mscsAimStatNodeKBsReceived | 1.3.6.1.4.1.546.16.51.2.2.2.1.16 | Counter | read-only | Cluster node performance counter. |
| CTR mscsAimStatNodeKBsSent | 1.3.6.1.4.1.546.16.51.2.2.2.1.17 | Counter | read-only | Cluster node performance counter. |
| INT mscsAimStatNodeMajorVersion | 1.3.6.1.4.1.546.16.51.2.2.2.1.11 | INTEGER | read-only | The major portion of the Windows version installed. |
| CTR mscsAimStatNodeMessagesReceived | 1.3.6.1.4.1.546.16.51.2.2.2.1.18 | Counter | read-only | Cluster node performance counter. |
| CTR mscsAimStatNodeMessagesSent | 1.3.6.1.4.1.546.16.51.2.2.2.1.19 | Counter | read-only | Cluster node performance counter. |
| INT mscsAimStatNodeMinorVersion | 1.3.6.1.4.1.546.16.51.2.2.2.1.12 | INTEGER | read-only | The minor portion of the Windows version installed. |
| STR mscsAimStatNodeName | 1.3.6.1.4.1.546.16.51.2.2.2.1.4 | SnmpAdminString | read-only | Defines the label by which the node is known. |
| INT mscsAimStatNodeNodeHighestVersion | 1.3.6.1.4.1.546.16.51.2.2.2.1.13 | INTEGER | read-only | The highest possible version of the cluster service with which the node can join or communicate. |
| INT mscsAimStatNodeNodeLowestVersion | 1.3.6.1.4.1.546.16.51.2.2.2.1.14 | INTEGER | read-only | The lowest possible version of the cluster service with which the node can join or communicate. |
| GAU mscsAimStatNodeNormalMessageQueueLength | 1.3.6.1.4.1.546.16.51.2.2.2.1.20 | Gauge | read-only | Cluster node performance counter. |
| INT mscsAimStatNodeState | 1.3.6.1.4.1.546.16.51.2.2.2.1.15 | INTEGER | read-only | Returns the current state of a node. Possible values: StateUnknown (-1) Up (0) Down (1) Paused (2) Joining (3) |
| mscsAimStatNodeTable | 1.3.6.1.4.1.546.16.51.2.2.2 | not-accessible | ||
| GAU mscsAimStatNodeUnacknowledgedMessageQueueLength | 1.3.6.1.4.1.546.16.51.2.2.2.1.21 | Gauge | read-only | Cluster node performance counter. |
| GAU mscsAimStatNodeUrgentMessageQueueLength | 1.3.6.1.4.1.546.16.51.2.2.2.1.22 | Gauge | read-only | Cluster node performance counter. |
| INT mscsAimStatPrivateResourcePropertyCount | 1.3.6.1.4.1.546.16.51.2.10.1 | INTEGER | read-only | The number of rows in the table. |
| mscsAimStatPrivateResourcePropertyEntry | 1.3.6.1.4.1.546.16.51.2.10.2.1 | not-accessible | ||
| mscsAimStatPrivateResourcePropertyGroup | 1.3.6.1.4.1.546.16.51.2.10 | |||
| INT mscsAimStatPrivateResourcePropertyIndex | 1.3.6.1.4.1.546.16.51.2.10.2.1.1 | INTEGER | read-only | The numeric index of this row. |
| STR mscsAimStatPrivateResourcePropertyInstanceName | 1.3.6.1.4.1.546.16.51.2.10.2.1.2 | DisplayString | read-only | The instance this table row belongs to. |
| STR mscsAimStatPrivateResourcePropertyKey | 1.3.6.1.4.1.546.16.51.2.10.2.1.4 | DisplayString | read-only | The key name of this private property |
| INT mscsAimStatPrivateResourcePropertyResourceIndex | 1.3.6.1.4.1.546.16.51.2.10.2.1.3 | INTEGER | read-only | The index of the Resource this table row belongs to. |
| mscsAimStatPrivateResourcePropertyTable | 1.3.6.1.4.1.546.16.51.2.10.2 | not-accessible | ||
| STR mscsAimStatPrivateResourcePropertyValue | 1.3.6.1.4.1.546.16.51.2.10.2.1.5 | SnmpAdminString | read-only | The value of this private property. |
| INT mscsAimStatResourceClusterIndex | 1.3.6.1.4.1.546.16.51.2.5.2.1.3 | INTEGER | read-only | The index of the cluster this table row belongs to. |
| INT mscsAimStatResourceCount | 1.3.6.1.4.1.546.16.51.2.5.1 | INTEGER | read-only | The number of rows in the table. |
| INT mscsAimStatResourceDeadlockTimeout | 1.3.6.1.4.1.546.16.51.2.5.2.1.8 | INTEGER | read-only | Indicates the length of time to wait, in milliseconds, before declaring a deadlock in any call into a resource. This property is not supported before Windows Server 2008. |
| STR mscsAimStatResourceDependencies | 1.3.6.1.4.1.546.16.51.2.5.2.1.26 | DisplayString | read-only | Dependencies of that resource. |
| STR mscsAimStatResourceDescription | 1.3.6.1.4.1.546.16.51.2.5.2.1.7 | SnmpAdminString | read-only | The description of the resource. |
| mscsAimStatResourceEntry | 1.3.6.1.4.1.546.16.51.2.5.2.1 | not-accessible | ||
| mscsAimStatResourceGroup | 1.3.6.1.4.1.546.16.51.2.5 | |||
| INT mscsAimStatResourceGroupAutoFailbackType | 1.3.6.1.4.1.546.16.51.2.4.2.1.7 | INTEGER | read-only | Specifies whether the group should automatically be failed back to the node identified as its preferred owner when that node comes back online following a failover. |
| INT mscsAimStatResourceGroupClusterIndex | 1.3.6.1.4.1.546.16.51.2.4.2.1.3 | INTEGER | read-only | The index of the cluster this table row belongs to. |
| INT mscsAimStatResourceGroupCount | 1.3.6.1.4.1.546.16.51.2.4.1 | INTEGER | read-only | The number of rows in the table. |
| INT mscsAimStatResourceGroupDefaultOwner | 1.3.6.1.4.1.546.16.51.2.4.2.1.8 | INTEGER | read-only | Number of the last node the resource group was activated on or explicitly moved to. This property is not supported before Windows Server 2008 R2. |
| STR mscsAimStatResourceGroupDescription | 1.3.6.1.4.1.546.16.51.2.4.2.1.6 | SnmpAdminString | read-only | The description of the resource group. |
| mscsAimStatResourceGroupEntry | 1.3.6.1.4.1.546.16.51.2.4.2.1 | not-accessible | ||
| INT mscsAimStatResourceGroupFailbackWindowEnd | 1.3.6.1.4.1.546.16.51.2.4.2.1.10 | INTEGER | read-only | The latest time in hours that the group can be moved back to the node identified as its preferred node. |
| INT mscsAimStatResourceGroupFailbackWindowStart | 1.3.6.1.4.1.546.16.51.2.4.2.1.9 | INTEGER | read-only | The earliest time (that is, local time as kept by the cluster) in hours that the group can be moved back to the node identified as its preferred node. |
| GAU mscsAimStatResourceGroupFailoverPeriod | 1.3.6.1.4.1.546.16.51.2.4.2.1.11 | Gauge | read-only | The number of hours during which a maximum number of failover attempts, specified by the FailoverThreshold property, can occur. |
| GAU mscsAimStatResourceGroupFailoverThreshold | 1.3.6.1.4.1.546.16.51.2.4.2.1.12 | Gauge | read-only | The maximum number of failover attempts. |
| mscsAimStatResourceGroupGroup | 1.3.6.1.4.1.546.16.51.2.4 | |||
| INT mscsAimStatResourceGroupGroupType | 1.3.6.1.4.1.546.16.51.2.4.2.1.13 | INTEGER | read-only | The Type of the resource group. Possible values: fileServer (100) printServer (101) dhcpServer (102) dtc (103) msmq (104) wins (105) standAloneDfs (106) genericApplication (107) genericService (108) genericScript (109) iScsiNameService (110) virtualMachine (111) tsSessionBroker (112) unknown (9999) |
| INT mscsAimStatResourceGroupIndex | 1.3.6.1.4.1.546.16.51.2.4.2.1.1 | INTEGER | read-only | The numeric index of this row. |
| STR mscsAimStatResourceGroupInstanceName | 1.3.6.1.4.1.546.16.51.2.4.2.1.2 | DisplayString | read-only | The instance this table row belongs to. |
| STR mscsAimStatResourceGroupName | 1.3.6.1.4.1.546.16.51.2.4.2.1.5 | SnmpAdminString | read-only | The name of the resource group. |
| INT mscsAimStatResourceGroupNodeIndex | 1.3.6.1.4.1.546.16.51.2.4.2.1.4 | INTEGER | read-only | The index of the node this table row belongs to. |
| STR mscsAimStatResourceGroupNodeName | 1.3.6.1.4.1.546.16.51.2.4.2.1.19 | SnmpAdminString | not-accessible | The name of the new node this table row belonged to (used for migrate trap). |
| INT mscsAimStatResourceGroupPersistentState | 1.3.6.1.4.1.546.16.51.2.4.2.1.14 | INTEGER | read-only | Specifies whether a group should be left offline or brought online when the Cluster service starts. |
| STR mscsAimStatResourceGroupPreferredNodes | 1.3.6.1.4.1.546.16.51.2.4.2.1.17 | DisplayString | read-only | |
| INT mscsAimStatResourceGroupPreviousNodeIndex | 1.3.6.1.4.1.546.16.51.2.4.2.1.18 | INTEGER | not-accessible | The index of the previous node this table row belonged to (used for migrate trap). |
| STR mscsAimStatResourceGroupPreviousNodeName | 1.3.6.1.4.1.546.16.51.2.4.2.1.20 | SnmpAdminString | not-accessible | The name of the previous node this table row belonged to (used for migrate trap). |
| INT mscsAimStatResourceGroupPriority | 1.3.6.1.4.1.546.16.51.2.4.2.1.15 | INTEGER | read-only | Priority value of the resource group This property is not supported before Windows Server 2008 R2. |
| INT mscsAimStatResourceGroupState | 1.3.6.1.4.1.546.16.51.2.4.2.1.16 | INTEGER | read-only | The current state of the resource group. Possible values: StateUnknown (-1) Online (0) Offline (1) Failed (2) PartialOnline (3) Pending (4) |
| mscsAimStatResourceGroupTable | 1.3.6.1.4.1.546.16.51.2.4.2 | not-accessible | ||
| INT mscsAimStatResourceIndex | 1.3.6.1.4.1.546.16.51.2.5.2.1.1 | INTEGER | read-only | The numeric index of this row. |
| STR mscsAimStatResourceInstanceName | 1.3.6.1.4.1.546.16.51.2.5.2.1.2 | DisplayString | read-only | The instance this table row belongs to. |
| GAU mscsAimStatResourceIsAlivePollInterval | 1.3.6.1.4.1.546.16.51.2.5.2.1.9 | Gauge | read-only | The recommended interval in milliseconds at which the Cluster Service should poll the resource to determine whether it is operational. |
| INT mscsAimStatResourceIsClusterSharedVolume | 1.3.6.1.4.1.546.16.51.2.5.2.1.10 | INTEGER | read-only | Specifies if the resource is a cluster shared volume resource. This property is not supported before Windows Server 2008 R2. |
| INT mscsAimStatResourceLocalQuorumCapable | 1.3.6.1.4.1.546.16.51.2.5.2.1.11 | INTEGER | read-only | The resource can be selected as the quorum resource in clusters configured using the -localquorum switch. |
| GAU mscsAimStatResourceLooksAlivePollInterval | 1.3.6.1.4.1.546.16.51.2.5.2.1.12 | Gauge | read-only | The recommended interval in milliseconds at which the Cluster Service should poll the resource to determine whether it appears operational. |
| STR mscsAimStatResourceName | 1.3.6.1.4.1.546.16.51.2.5.2.1.5 | DisplayString | read-only | The name of the resource. |
| INT mscsAimStatResourcePendingTimeout | 1.3.6.1.4.1.546.16.51.2.5.2.1.13 | INTEGER | read-only | Provides access to the resource's PendingTimeout property. If a resource cannot be brought online or taken offline in the number of milliseconds specified by the PendingTimeout property, the resource is forcibly terminated. This property is not supported before Windows Server 2008. |
| INT mscsAimStatResourcePersistentState | 1.3.6.1.4.1.546.16.51.2.5.2.1.14 | INTEGER | read-only | Specifies whether the resource should be brought online or left offline when the Cluster Service is started. |
| STR mscsAimStatResourcePossibleOwners | 1.3.6.1.4.1.546.16.51.2.5.2.1.25 | DisplayString | read-only | Possible owners of that resource |
| INT mscsAimStatResourceQuorumCapable | 1.3.6.1.4.1.546.16.51.2.5.2.1.15 | INTEGER | read-only | The resource can be selected as the quorum resource for the cluster. |
| INT mscsAimStatResourceResourceClass | 1.3.6.1.4.1.546.16.51.2.5.2.1.16 | INTEGER | read-only | The resource class of a resource. |
| INT mscsAimStatResourceResourceGroupIndex | 1.3.6.1.4.1.546.16.51.2.5.2.1.4 | INTEGER | read-only | The index of the Resource Group this table row belongs to. |
| STR mscsAimStatResourceResourceSpecificStatus | 1.3.6.1.4.1.546.16.51.2.5.2.1.17 | DisplayString | read-only | Provides a resource-specific status message that complements the current resource state. This property is not supported before Windows Server 2008. |
| INT mscsAimStatResourceResourceTypeIndex | 1.3.6.1.4.1.546.16.51.2.5.2.1.6 | INTEGER | read-only | Index of the type of the resource. |
| INT mscsAimStatResourceRestartAction | 1.3.6.1.4.1.546.16.51.2.5.2.1.18 | INTEGER | read-only | The action to be taken by the Cluster Service if the resource fails. Possible values; Do not restart the resource after a failure. (0) Restart the resource after a failure. If the resource exceeds its restart threshold within its restart period, do not attempt to failover the group to another node in the cluster. (1) Restart the resource after a failure. If the resource exceeds its restart threshold within its restart period, attempt to fail over the group to another node in the cluster. This is the default setting. (2) |
| GAU mscsAimStatResourceRestartDelay | 1.3.6.1.4.1.546.16.51.2.5.2.1.19 | Gauge | read-only | The time delay in milliseconds before a failed resource is restarted. This property is not supported before Windows Server 2008. |
| INT mscsAimStatResourceRestartPeriod | 1.3.6.1.4.1.546.16.51.2.5.2.1.20 | INTEGER | read-only | The interval of time, in milliseconds, during which a specified number of restart attempts can be made on a nonresponsive resource. |
| INT mscsAimStatResourceRestartThreshold | 1.3.6.1.4.1.546.16.51.2.5.2.1.21 | INTEGER | read-only | The maximum number of restart attempts that can be made on a resource within an interval defined by the RestartPeriod property before the Cluster Service initiates the action specified by the RestartAction property. |
| INT mscsAimStatResourceRetryPeriodOnFailure | 1.3.6.1.4.1.546.16.51.2.5.2.1.22 | INTEGER | read-only | The interval of time (in milliseconds) that a resource should remain in a failed state before the Cluster service attempts to restart it. |
| INT mscsAimStatResourceSeparateMonitor | 1.3.6.1.4.1.546.16.51.2.5.2.1.23 | INTEGER | read-only | Indicates whether the resource requires its own Resource Monitor. |
| INT mscsAimStatResourceState | 1.3.6.1.4.1.546.16.51.2.5.2.1.24 | INTEGER | read-only | The current state of the resource. Possible values: StateUnknown (-1) Inherited (0) Initializing (1) Online (2) Offline (3) Failed (4) Pending (128) OnlinePending (129) OfflinePending (130) |
| mscsAimStatResourceTable | 1.3.6.1.4.1.546.16.51.2.5.2 | not-accessible | ||
| INT mscsAimStatResourceTypeCharacteristics | 1.3.6.1.4.1.546.16.51.2.3.2.1.6 | INTEGER | read-only | The characteristics set for the resource type. |
| INT mscsAimStatResourceTypeClusterIndex | 1.3.6.1.4.1.546.16.51.2.3.2.1.3 | INTEGER | read-only | The index of the cluster this table row belongs to. |
| INT mscsAimStatResourceTypeCount | 1.3.6.1.4.1.546.16.51.2.3.1 | INTEGER | read-only | |
| GAU mscsAimStatResourceTypeDeadlockTimeout | 1.3.6.1.4.1.546.16.51.2.3.2.1.7 | Gauge | read-only | The length of time to wait, in milliseconds, before declaring a deadlock in any call into a resource. |
| INT mscsAimStatResourceTypeDeleteRequiresAllNodes | 1.3.6.1.4.1.546.16.51.2.3.2.1.8 | INTEGER | read-only | The resource cannot be deleted unless all nodes are active. |
| STR mscsAimStatResourceTypeDescription | 1.3.6.1.4.1.546.16.51.2.3.2.1.5 | SnmpAdminString | read-only | The description of the resource type. |
| STR mscsAimStatResourceTypeDisplayName | 1.3.6.1.4.1.546.16.51.2.3.2.1.9 | SnmpAdminString | read-only | The name displayed for the resource type. |
| STR mscsAimStatResourceTypeDllName | 1.3.6.1.4.1.546.16.51.2.3.2.1.10 | SnmpAdminString | read-only | The name of the dynamic-link library (DLL) for the resource type. |
| mscsAimStatResourceTypeEntry | 1.3.6.1.4.1.546.16.51.2.3.2.1 | not-accessible | ||
| mscsAimStatResourceTypeGroup | 1.3.6.1.4.1.546.16.51.2.3 | |||
| INT mscsAimStatResourceTypeIndex | 1.3.6.1.4.1.546.16.51.2.3.2.1.1 | INTEGER | read-only | |
| STR mscsAimStatResourceTypeInstanceName | 1.3.6.1.4.1.546.16.51.2.3.2.1.2 | DisplayString | read-only | The instance this table row belongs to. |
| INT mscsAimStatResourceTypeIsAlivePollInterval | 1.3.6.1.4.1.546.16.51.2.3.2.1.11 | INTEGER | read-only | The recommended interval in milliseconds at which the Cluster Service should poll the resource to determine whether it is operational. |
| INT mscsAimStatResourceTypeLocalQuorumCapable | 1.3.6.1.4.1.546.16.51.2.3.2.1.12 | INTEGER | read-only | Windows Server 2003: The resource can be selected as the quorum resource in clusters configured using the -localquorum switch. |
| INT mscsAimStatResourceTypeLooksAlivePollInterval | 1.3.6.1.4.1.546.16.51.2.3.2.1.13 | INTEGER | read-only | The recommended interval in milliseconds at which the Cluster Service should poll the resource to determine whether it appears operational. |
| STR mscsAimStatResourceTypeName | 1.3.6.1.4.1.546.16.51.2.3.2.1.4 | DisplayString | read-only | The name of the resource type. |
| INT mscsAimStatResourceTypePendingTimeout | 1.3.6.1.4.1.546.16.51.2.3.2.1.14 | INTEGER | read-only | If a resource cannot be brought online or taken offline in the number of milliseconds specified by this property, the resource is forcibly terminated. Windows Server 2003: This property is not supported. |
| INT mscsAimStatResourceTypeQuorumCapable | 1.3.6.1.4.1.546.16.51.2.3.2.1.15 | INTEGER | read-only | The resource can be selected as the quorum resource for the cluster. |
| mscsAimStatResourceTypeTable | 1.3.6.1.4.1.546.16.51.2.3.2 | not-accessible | ||
| sysmgmt | 1.3.6.1.4.1.546.1.1 | |||
| traps | 1.3.6.1.4.1.546.9 | |||
| unix | 1.3.6.1.4.1.546.1 |
RFC description
Monitors Microsoft Cluster (MSCS) instances and statistics via Computer Associates management agent.
Start monitoring Compute host monitored by CA Unicenter AIM (multi-service computing) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.