CIE1000-PORT-MIB

All MIBs › CIE1000-PORT-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2015-07-07

Category: Cisco Devices, Network Interfaces

Description: Manages physical port configuration including speed, duplex, and operational status on Cisco IE1000 industrial Ethernet switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIE1000-PORT-MIB?

CIE1000-PORT-MIB is a Cisco-private port-management MIB for the Cisco IE1000 series industrial Ethernet switches, modeled on the standard PORT-MIB. It exposes a per-interface configuration table covering administrative shutdown state, speed, duplex/advertise settings, media type, flow control (FC/PFC), MTU, and frame-length checking. In monitoring terms it is primarily used to track port-level operational and administrative status and configuration health—an admin can detect a port that has been shut down, is misconfigured for speed/duplex, or is showing excessive link restarts, a strong indicator of a flapping or failing physical connection. It is a Cisco private extension layered on ifIndex from the standard IF-MIB, tying each entry back to the interface table. It is deployed in industrial/ruggedized Ethernet environments (factory floor, process control networks) where IE1000 switches provide hardened Ethernet connectivity. Engineers can download the CIE1000-PORT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIE1000-PORT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IE1000 industrial Ethernet switches

Monitoring Examples

An admin would poll cie1000PortConfigTable/cie1000PortConfigEntry, indexed by cie1000PortConfigIfIndex, checking cie1000PortConfigShutdown, cie1000PortConfigSpeed, and cie1000PortConfigExcessiveRestart for each port. A rising cie1000PortConfigExcessiveRestart counter combined with the cie1000PortConfigMediaType and cie1000PortConfigFC settings would reveal a port repeatedly restarting, pointing to a bad cable, SFP, or a duplex/speed mismatch with the connected industrial device.

What Can Be Monitored

port administrative shutdown state
port speed and duplex/advertise settings
media type
flow control (FC/PFC) status
MTU configuration
excessive port restart count

Imported Objects

From CIE1000-TC

CIE1000DisplayString
CIE1000InterfaceIndex
CIE1000PortStatusSpeed
CIE1000SfpTransceiver
CIE1000Unsigned8

From CISCO-IE1000-MIB

cie1000SwitchMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using cie1000PortStatisticsRmonStatisticsRxDropEvents OID:

Select a Cisco IE1000 industrial Ethernet switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cie1000PortStatisticsRmonStatisticsRxDropEvents into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Shows the number of frames discarded due to ingress congestion. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
cie1000PortConfig	1.3.6.1.4.1.9.9.832.1.11.1.2
CIE cie1000PortConfigAdvertiseDisabled	1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.4	CIE1000Unsigned8	read-write	In auto mode, bitmask that allows features not to be advertised. Bit 0: Disable half duplex advertising. Bit 1: Disable full duplex advertising. Bit 4: Disable 1G advertising. Bit 6: Disable 100M advertising. Bit 7: Disable 10M advertising. When not in auto mode, the value shall be zero.
cie1000PortConfigEntry	1.3.6.1.4.1.9.9.832.1.11.1.2.1.1		not-accessible	Each port interface has a set of parameters
T/F cie1000PortConfigExcessiveRestart	1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.8	TruthValue	read-write	TRUE to restart half-duplex back-off algorithm after 16 collisions. FALSE to discard frame after 16 collisions
CIE cie1000PortConfigFC	1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.6	CIE1000PortFc	read-write	Controls the port flow control mode.
T/F cie1000PortConfigFrameLengthCheck	1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.10	TruthValue	read-write	TRUE to enforce 802.3 frame length check (from Ethertype field). If enabled frames with length that doesn't match the frame length field will be dropped.
NUM cie1000PortConfigIfIndex	1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
cie1000PortConfigInfoGroup	1.3.6.1.4.1.9.9.832.1.11.2.2.1			A collection of objects.
CIE cie1000PortConfigMediaType	1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.5	CIE1000PortMedia	read-write	Controls the port media type.
U32 cie1000PortConfigMTU	1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.7	Unsigned32	read-write	Controls the port's Maximum Transmission Unit.
CIE cie1000PortConfigPFC	1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.9	CIE1000Unsigned8	read-write	802.1Qbb Priority Flow Control bitmask, one bit for each prioritet.E.g. 0x01 = prio 0, 0x80 = prio 7, 0xFF = prio 0-7
T/F cie1000PortConfigShutdown	1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.2	TruthValue	read-write	Controls whether interface is shutdown or powered up. Set to TRUE in order to power down the interface.
CIE cie1000PortConfigSpeed	1.3.6.1.4.1.9.9.832.1.11.1.2.1.1.3	CIE1000PortSpeed	read-write	Controls the port speed and duplex.
cie1000PortConfigTable	1.3.6.1.4.1.9.9.832.1.11.1.2.1		not-accessible	This is a table of the port interface parameters
cie1000PortControl	1.3.6.1.4.1.9.9.832.1.11.1.4
cie1000PortControlStatisticsClear	1.3.6.1.4.1.9.9.832.1.11.1.4.1
cie1000PortControlStatisticsClearEntry	1.3.6.1.4.1.9.9.832.1.11.1.4.1.1.1		not-accessible	Each port has a set of control parameters
NUM cie1000PortControlStatisticsClearIfIndex	1.3.6.1.4.1.9.9.832.1.11.1.4.1.1.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
T/F cie1000PortControlStatisticsClearStatisticsClear	1.3.6.1.4.1.9.9.832.1.11.1.4.1.1.1.2	TruthValue	read-write	Set to TRUE to clear the statistics of an interface.
cie1000PortControlStatisticsClearTable	1.3.6.1.4.1.9.9.832.1.11.1.4.1.1		not-accessible	This is a table to clear port Interface statistics
cie1000PortControlStatisticsClearTableInfoGroup	1.3.6.1.4.1.9.9.832.1.11.2.2.4			A collection of objects.
cie1000PortControlVeriPhyStart	1.3.6.1.4.1.9.9.832.1.11.1.4.2
cie1000PortControlVeriPhyStartEntry	1.3.6.1.4.1.9.9.832.1.11.1.4.2.1.1		not-accessible	Each port has a set of control parameters
NUM cie1000PortControlVeriPhyStartIfIndex	1.3.6.1.4.1.9.9.832.1.11.1.4.2.1.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
T/F cie1000PortControlVeriPhyStartStart	1.3.6.1.4.1.9.9.832.1.11.1.4.2.1.1.2	TruthValue	read-write	Set to TRUE to start VeriPHy for the interface. When running 10 and 100 Mbps, ports will be linked down while running VeriPHY. Therefore, running VeriPHY on a 10 or 100 Mbps management port will cause the switch to stop responding until VeriPHY is complete.
cie1000PortControlVeriPhyStartTable	1.3.6.1.4.1.9.9.832.1.11.1.4.2.1		not-accessible	This is a table to start VeriPhy for the interface
cie1000PortControlVeriPhyStartTableInfoGroup	1.3.6.1.4.1.9.9.832.1.11.2.2.5			A collection of objects.
cie1000PortMib	1.3.6.1.4.1.9.9.832.1.11			This is a private version of the PORT MIB
cie1000PortMibCompliance	1.3.6.1.4.1.9.9.832.1.11.2.1.1			The compliance statement for the implementation.
cie1000PortMibCompliances	1.3.6.1.4.1.9.9.832.1.11.2.1
cie1000PortMibConformance	1.3.6.1.4.1.9.9.832.1.11.2
cie1000PortMibGroups	1.3.6.1.4.1.9.9.832.1.11.2.2
cie1000PortMibObjects	1.3.6.1.4.1.9.9.832.1.11.1
cie1000PortStatistics	1.3.6.1.4.1.9.9.832.1.11.1.5
cie1000PortStatisticsBridgeStatisticsEntry	1.3.6.1.4.1.9.9.832.1.11.1.5.5.1		not-accessible	Each port interface has a set of statistics counters
NUM cie1000PortStatisticsBridgeStatisticsIfIndex	1.3.6.1.4.1.9.9.832.1.11.1.5.5.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
C64 cie1000PortStatisticsBridgeStatisticsRxBridgeDiscard	1.3.6.1.4.1.9.9.832.1.11.1.5.5.1.2	Counter64	read-only	The number of bridge frames discarded.
cie1000PortStatisticsBridgeStatisticsTable	1.3.6.1.4.1.9.9.832.1.11.1.5.5		not-accessible	This table represents the port interface bridge counters
cie1000PortStatisticsBridgeStatisticsTableInfoGroup	1.3.6.1.4.1.9.9.832.1.11.2.2.10			A collection of objects.
cie1000PortStatisticsEthernetLikeStatisticsEntry	1.3.6.1.4.1.9.9.832.1.11.1.5.3.1		not-accessible	Each port interface has a set of statistics counters
NUM cie1000PortStatisticsEthernetLikeStatisticsIfIndex	1.3.6.1.4.1.9.9.832.1.11.1.5.3.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
C64 cie1000PortStatisticsEthernetLikeStatisticsRxPauseFrames	1.3.6.1.4.1.9.9.832.1.11.1.5.3.1.2	Counter64	read-only	The number of pause frames received.
cie1000PortStatisticsEthernetLikeStatisticsTable	1.3.6.1.4.1.9.9.832.1.11.1.5.3		not-accessible	This table represents the port Ethernet-like interfaces counters
cie1000PortStatisticsEthernetLikeStatisticsTableInfoGroup	1.3.6.1.4.1.9.9.832.1.11.2.2.8			A collection of objects.
C64 cie1000PortStatisticsEthernetLikeStatisticsTxPauseFrames	1.3.6.1.4.1.9.9.832.1.11.1.5.3.1.3	Counter64	read-only	The number of pause frames transmitted.
cie1000PortStatisticsIfGroupStatisticsEntry	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1		not-accessible	Each port interface has a set of statistics counters
NUM cie1000PortStatisticsIfGroupStatisticsIfIndex	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
C64 cie1000PortStatisticsIfGroupStatisticsRxBroadcastPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.5	Counter64	read-only	Shows the number of broad-cast frames received.
C64 cie1000PortStatisticsIfGroupStatisticsRxDiscards	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.7	Counter64	read-only	Shows the number of received frames discarded.
C64 cie1000PortStatisticsIfGroupStatisticsRxErrors	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.8	Counter64	read-only	Shows the number of frames with errors received.
C64 cie1000PortStatisticsIfGroupStatisticsRxMulticastPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.4	Counter64	read-only	Shows the number of multi-cast frames received.
C64 cie1000PortStatisticsIfGroupStatisticsRxNonUnicastPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.6	Counter64	read-only	Shows the number of non uni-cast frames received.
C64 cie1000PortStatisticsIfGroupStatisticsRxOctets	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.2	Counter64	read-only	Shows the number of bytes received.
C64 cie1000PortStatisticsIfGroupStatisticsRxUnicastPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.3	Counter64	read-only	Shows the number of uni-cast frames received.
cie1000PortStatisticsIfGroupStatisticsTable	1.3.6.1.4.1.9.9.832.1.11.1.5.2		not-accessible	This table represents the port interfaces group (RFC 2863) counters
cie1000PortStatisticsIfGroupStatisticsTableInfoGroup	1.3.6.1.4.1.9.9.832.1.11.2.2.7			A collection of objects.
C64 cie1000PortStatisticsIfGroupStatisticsTxBroadcastPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.12	Counter64	read-only	Shows the number of broad-cast frames transmitted.
C64 cie1000PortStatisticsIfGroupStatisticsTxDiscardPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.14	Counter64	read-only	Shows the number of discard frames which should been transmitted.
C64 cie1000PortStatisticsIfGroupStatisticsTxErrorPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.15	Counter64	read-only	Shows the number of frames transmit with error.
C64 cie1000PortStatisticsIfGroupStatisticsTxMulticastPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.11	Counter64	read-only	Shows the number of multi-cast frames transmitted.
C64 cie1000PortStatisticsIfGroupStatisticsTxNonUnicastPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.13	Counter64	read-only	Shows the number of non uni-cast frames transmitted.
C64 cie1000PortStatisticsIfGroupStatisticsTxOctets	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.9	Counter64	read-only	Shows the number of bytes transmitted.
C64 cie1000PortStatisticsIfGroupStatisticsTxUnicastPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.2.1.10	Counter64	read-only	Shows the number of uni-cast frames transmitted.
cie1000PortStatisticsQueuesStatisticsEntry	1.3.6.1.4.1.9.9.832.1.11.1.5.4.1		not-accessible	Each port interface has a set of statistics counters
NUM cie1000PortStatisticsQueuesStatisticsIfIndex	1.3.6.1.4.1.9.9.832.1.11.1.5.4.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
I32 cie1000PortStatisticsQueuesStatisticsQueue	1.3.6.1.4.1.9.9.832.1.11.1.5.4.1.2	Integer32	accessible-for-notify	Queue index.
C64 cie1000PortStatisticsQueuesStatisticsRxPrio	1.3.6.1.4.1.9.9.832.1.11.1.5.4.1.3	Counter64	read-only	The number of frames received for the queue.
cie1000PortStatisticsQueuesStatisticsTable	1.3.6.1.4.1.9.9.832.1.11.1.5.4		not-accessible	This table represents the port interfaces queues counters
cie1000PortStatisticsQueuesStatisticsTableInfoGroup	1.3.6.1.4.1.9.9.832.1.11.2.2.9			A collection of objects.
C64 cie1000PortStatisticsQueuesStatisticsTxPrio	1.3.6.1.4.1.9.9.832.1.11.1.5.4.1.4	Counter64	read-only	The number of frames transmitted for the queue.
cie1000PortStatisticsRmonStatisticsEntry	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1		not-accessible	Each port interface has a set of statistics counters
NUM cie1000PortStatisticsRmonStatisticsIfIndex	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
C64 cie1000PortStatisticsRmonStatisticsRx1024to1518Pkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.17	Counter64	read-only	The number of received frames with size within 1024 to 1518 bytes.
C64 cie1000PortStatisticsRmonStatisticsRx128to255Pkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.14	Counter64	read-only	The number of received frames with size within 128 to 255 bytes.
C64 cie1000PortStatisticsRmonStatisticsRx1519PktsToMax	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.18	Counter64	read-only	The number of received frames with size larger than 1518 bytes.
C64 cie1000PortStatisticsRmonStatisticsRx256to511Pkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.15	Counter64	read-only	The number of received frames with size within 256 to 511 bytes.
C64 cie1000PortStatisticsRmonStatisticsRx512to1023Pkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.16	Counter64	read-only	The number of received frames with size within 512 to 1023 bytes.
C64 cie1000PortStatisticsRmonStatisticsRx64Pkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.12	Counter64	read-only	The number of 64 bytes frames received.
C64 cie1000PortStatisticsRmonStatisticsRx65to127Pkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.13	Counter64	read-only	The number of received frames with size within 65 to 127 bytes.
C64 cie1000PortStatisticsRmonStatisticsRxBroadcastPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.5	Counter64	read-only	Shows the number of received (good and bad) broadcast packets.
C64 cie1000PortStatisticsRmonStatisticsRxCrcAlignErrPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.7	Counter64	read-only	Shows the number of frames received with CRC or alignment errors.
C64 cie1000PortStatisticsRmonStatisticsRxDropEventsEx	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.2	Counter64	read-only	Shows the number of frames discarded due to ingress congestion.
C64 cie1000PortStatisticsRmonStatisticsRxFragmentsPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.10	Counter64	read-only	Shows the number of short frames (frames that are smaller than 64 bytes) received with invalid CRC.
C64 cie1000PortStatisticsRmonStatisticsRxJabbersPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.11	Counter64	read-only	The number of long frames (frames that are longer than the configured maximum frame length for this interface) received with invalid CRC.
C64 cie1000PortStatisticsRmonStatisticsRxMulticastPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.6	Counter64	read-only	Shows the number of received (good and bad) multicast packets.
C64 cie1000PortStatisticsRmonStatisticsRxOctets	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.3	Counter64	read-only	Shows the number of received (good and bad) bytes. Includes FCS, but excludes framing bits.
C64 cie1000PortStatisticsRmonStatisticsRxOversizePkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.9	Counter64	read-only	Shows the number of long frames received with valid CRC.
C64 cie1000PortStatisticsRmonStatisticsRxPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.4	Counter64	read-only	Shows the number of received (good and bad) packets.
C64 cie1000PortStatisticsRmonStatisticsRxUndersizePkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.8	Counter64	read-only	Shows the number of short frames (frames that are smaller than 64 bytes) received with valid CRC.
cie1000PortStatisticsRmonStatisticsTable	1.3.6.1.4.1.9.9.832.1.11.1.5.1		not-accessible	This table represents the port interface RMON statistics counters
cie1000PortStatisticsRmonStatisticsTableInfoGroup	1.3.6.1.4.1.9.9.832.1.11.2.2.6			A collection of objects.
C64 cie1000PortStatisticsRmonStatisticsTx1024to1518Pkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.29	Counter64	read-only	The number of transmitted frames with size within 1024 to 1518 bytes.
C64 cie1000PortStatisticsRmonStatisticsTx128to255Pkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.26	Counter64	read-only	The number of transmitted frames with size within 128 to 255 bytes.
C64 cie1000PortStatisticsRmonStatisticsTx1519PktsToMax	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.30	Counter64	read-only	The number of transmitted frames with size larger than 1518 bytes.
C64 cie1000PortStatisticsRmonStatisticsTx256to511Pkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.27	Counter64	read-only	The number of transmitted frames with size within 256 to 511 bytes.
C64 cie1000PortStatisticsRmonStatisticsTx512to1023Pkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.28	Counter64	read-only	The number of transmitted frames with size within 512 to 1023 bytes.
C64 cie1000PortStatisticsRmonStatisticsTx64Pkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.24	Counter64	read-only	The number of 64 bytes frames transmitted.
C64 cie1000PortStatisticsRmonStatisticsTx65to127Pkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.25	Counter64	read-only	The number of transmitted frames with size within 65 to 127 bytes.
C64 cie1000PortStatisticsRmonStatisticsTxBroadcastPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.22	Counter64	read-only	Shows the number of transmitted (good and bad) broadcast packets.
C64 cie1000PortStatisticsRmonStatisticsTxDropEvents	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.19	Counter64	read-only	Shows the number of frames discarded due to egress congestion.
C64 cie1000PortStatisticsRmonStatisticsTxMulticastPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.23	Counter64	read-only	Shows the number of transmitted (good and bad) multicast packets.
C64 cie1000PortStatisticsRmonStatisticsTxOctets	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.20	Counter64	read-only	Shows the number of transmitted (good and bad) bytes. Includes FCS, but excludes framing bits.
C64 cie1000PortStatisticsRmonStatisticsTxPkts	1.3.6.1.4.1.9.9.832.1.11.1.5.1.1.21	Counter64	read-only	Shows the number of transmitted (good and bad) packets.
cie1000PortStatus	1.3.6.1.4.1.9.9.832.1.11.1.3
cie1000PortStatusInformationEntry	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1		not-accessible	Each port interface has a set of status parameters
T/F cie1000PortStatusInformationFdx	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.3	TruthValue	read-only	Shows whether interface is running in full duplex.
T/F cie1000PortStatusInformationFiber	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.4	TruthValue	read-only	Shows whether interface is a fiber link (fiber SFP or cu SFP).
NUM cie1000PortStatusInformationIfIndex	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
T/F cie1000PortStatusInformationLink	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.2	TruthValue	read-only	Shows whether interface has link.
U32 cie1000PortStatusInformationRxErrorUtilization	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.13	Unsigned32	read-only	Rx error utilization in percent.
U32 cie1000PortStatusInformationRxUtilization	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.11	Unsigned32	read-only	Rx utilization in percent.
CIE cie1000PortStatusInformationSFPType	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.6	CIE1000SfpTransceiver	read-only	Shows the current interface SFP type.
STR cie1000PortStatusInformationSFPVendorName	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.7	CIE1000DisplayString	read-only	Shows the SFP vendor name.
STR cie1000PortStatusInformationSFPVendorPN	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.8	CIE1000DisplayString	read-only	Shows the SFP vendor Product Number.
STR cie1000PortStatusInformationSFPVendorRev	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.9	CIE1000DisplayString	read-only	Shows the SFP vendor Revision.
STR cie1000PortStatusInformationSFPVendorSN	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.10	CIE1000DisplayString	read-only	Shows the SFP vendor Serial Number.
CIE cie1000PortStatusInformationSpeed	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.5	CIE1000PortStatusSpeed	read-only	Shows the current interface speed.
cie1000PortStatusInformationTable	1.3.6.1.4.1.9.9.832.1.11.1.3.1		not-accessible	This table represents the status of the ports
cie1000PortStatusInformationTableInfoGroup	1.3.6.1.4.1.9.9.832.1.11.2.2.2			A collection of objects.
U32 cie1000PortStatusInformationTxErrorUtilization	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.14	Unsigned32	read-only	Tx error utilization in percent.
U32 cie1000PortStatusInformationTxUtilization	1.3.6.1.4.1.9.9.832.1.11.1.3.1.1.12	Unsigned32	read-only	Tx utilization in percent.
cie1000PortStatusVeriPhyResult	1.3.6.1.4.1.9.9.832.1.11.1.3.3
cie1000PortStatusVeriPhyResultEntry	1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1		not-accessible	Each port has a set of VeriPhy results
NUM cie1000PortStatusVeriPhyResultIfIndex	1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
cie1000PortStatusVeriPhyResultTable	1.3.6.1.4.1.9.9.832.1.11.1.3.3.1		not-accessible	This table represents the VeriPhy result from the last VeriPhy run for the interface
cie1000PortStatusVeriPhyResultTableInfoGroup	1.3.6.1.4.1.9.9.832.1.11.2.2.3			A collection of objects.
CIE cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairA	1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.6	CIE1000Unsigned8	read-only	VeriPhy status cable length i meters for the cable pair. When VeriPhy is completed, the cable diagnostics results is shown in the VeriPhy status table. Note that VeriPHY is only accurate for cables of length 7 - 140 meters. The resolution is 3 meters
CIE cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairB	1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.7	CIE1000Unsigned8	read-only	VeriPhy status cable length i meters for the cable pair. When VeriPhy is completed, the cable diagnostics results is shown in the VeriPhy status table. Note that VeriPHY is only accurate for cables of length 7 - 140 meters. The resolution is 3 meters
CIE cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairC	1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.8	CIE1000Unsigned8	read-only	VeriPhy status cable length i meters for the cable pair. When VeriPhy is completed, the cable diagnostics results is shown in the VeriPhy status table. Note that VeriPHY is only accurate for cables of length 7 - 140 meters. The resolution is 3 meters
CIE cie1000PortStatusVeriPhyResultVeriPhyLengthStatusPairD	1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.9	CIE1000Unsigned8	read-only	VeriPhy status cable length i meters for the cable pair. When VeriPhy is completed, the cable diagnostics results is shown in the VeriPhy status table. Note that VeriPHY is only accurate for cables of length 7 - 140 meters. The resolution is 3 meters
CIE cie1000PortStatusVeriPhyResultVeriPhyStatusPairA	1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.2	CIE1000PortPhyVeriPhyStatus	read-only	VeriPhy status for the cable pair 0 - Cable is Correctly terminated pair 1 - Open pair 2 - Shorted pair 4 - Abnormal termination 8 - Cross-pair short to pair A 9 - Cross-pair short to pair B 10 - Cross-pair short to pair C 11 - Cross-pair short to pair D 12 - Abnormal cross-pair coupling - pair A 13 - Abnormal cross-pair coupling - pair B 14 - Abnormal cross-pair coupling - pair C 15 - Abnormal cross-pair coupling - pair D
CIE cie1000PortStatusVeriPhyResultVeriPhyStatusPairB	1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.3	CIE1000PortPhyVeriPhyStatus	read-only	VeriPhy status for the cable pair 0 - Cable is Correctly terminated pair 1 - Open pair 2 - Shorted pair 4 - Abnormal termination 8 - Cross-pair short to pair A 9 - Cross-pair short to pair B 10 - Cross-pair short to pair C 11 - Cross-pair short to pair D 12 - Abnormal cross-pair coupling - pair A 13 - Abnormal cross-pair coupling - pair B 14 - Abnormal cross-pair coupling - pair C 15 - Abnormal cross-pair coupling - pair D
CIE cie1000PortStatusVeriPhyResultVeriPhyStatusPairC	1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.4	CIE1000PortPhyVeriPhyStatus	read-only	VeriPhy status for the cable pair 0 - Cable is Correctly terminated pair 1 - Open pair 2 - Shorted pair 4 - Abnormal termination 8 - Cross-pair short to pair A 9 - Cross-pair short to pair B 10 - Cross-pair short to pair C 11 - Cross-pair short to pair D 12 - Abnormal cross-pair coupling - pair A 13 - Abnormal cross-pair coupling - pair B 14 - Abnormal cross-pair coupling - pair C 15 - Abnormal cross-pair coupling - pair D
CIE cie1000PortStatusVeriPhyResultVeriPhyStatusPairD	1.3.6.1.4.1.9.9.832.1.11.1.3.3.1.1.5	CIE1000PortPhyVeriPhyStatus	read-only	VeriPhy status for the cable pair 0 - Cable is Correctly terminated pair 1 - Open pair 2 - Shorted pair 4 - Abnormal termination 8 - Cross-pair short to pair A 9 - Cross-pair short to pair B 10 - Cross-pair short to pair C 11 - Cross-pair short to pair D 12 - Abnormal cross-pair coupling - pair A 13 - Abnormal cross-pair coupling - pair B 14 - Abnormal cross-pair coupling - pair C 15 - Abnormal cross-pair coupling - pair D

RFC description

Manages Cisco IE1000 switch port configuration, status, and diagnostics.

Start monitoring Cisco IE1000 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIE1000-PORT-MIB