All MIBs › AWCVX-MIB
Organization: Cisco Systems, Inc.
Last Updated: 2003-04-21
Category: Cisco Devices, Wireless and WLAN
Description: Provides management objects for Cisco Aironet (SpectraLink) wireless LAN devices, including radio and client statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is AWCVX-MIB?
AWCVX-MIB ("Aironet Wireless Communications, VxWorks") is a vendor-specific SNMP module for Cisco Aironet 802.11 wireless LAN devices, covering both Access Points and Wireless Access Bridges running the VxWorks embedded OS. It exposes device identity and software information (VxWorks version, Aironet software version, build/creation date, device ID), service-enablement configuration (HTTP, Telnet, SNMP, DNS resolver, SNTP), and 802.11 radio/MAC layer management objects. For monitoring purposes it is explicitly software/firmware-status oriented -- vxWorksVersion and awcVxVersion identify the running OS/firmware build, while enableHTTP/enableTelnet/enableSNMP/enableSNTP reveal which management services are active, useful for both operational status and security posture checks on the AP. It depends on IEEE 802.11 dot11 MIB conventions for its radio/MAC objects alongside Cisco's Aironet enterprise tree. It is deployed on Cisco Aironet access points and wireless bridges in enterprise or campus 802.11 wireless LAN deployments. Engineers can download the AWCVX-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in AWCVX-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco Aironet 802.11 wireless access point
- Cisco Aironet wireless access bridge
Monitoring Examples
A wireless administrator would poll awcVxVersion and vxWorksVersion to confirm firmware currency across a fleet of access points, flagging devices that need an upgrade before a known bug or vulnerability is patched. enableSNTP and enableDnsResolver would be checked to confirm time sync and DNS services are correctly enabled for reliable logging and authentication, while awcDot11smt/awcDot11mac objects provide the underlying 802.11 radio and MAC-layer statistics needed to diagnose client connectivity or interference issues on a given AP.
What Can Be Monitored
- firmware/VxWorks software version
- management service enablement (HTTP/Telnet/SNMP/SNTP/DNS)
- device identity/ID
- 802.11 radio and MAC layer statistics
This MIB depends on
Related MIBs
Imported Objects
From BRIDGE-MIB
| dot1dTpPort |
From RFC1213-MIB
| ifIndex |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Integer32 | |
| IpAddress | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 | |
| enterprises |
From SNMPv2-TC
| DisplayString | |
| MacAddress | |
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using awcEventCntSeverityNULL OID:
Select a Cisco Aironet 802.11 wireless access points/bridge (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type awcEventCntSeverityNULL into the Find box to locate it in the OID tree, then select it and click OK. It reports nULL message counter. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| aironet | 1.3.6.1.4.1.522 | |||
| T/F allowBrowseWithoutLogin | 1.3.6.1.4.1.522.3.7.3 | TruthValue | read-write | If true, the HTTP user interface to read-only web pages can be accessed without passing HTTP authentication. If false, any HTTP access requires the user to pass HTTP authentication. |
| awc802dot11 | 1.3.6.1.4.1.522.3.6 | |||
| awc802dot11Group | 1.3.6.1.4.1.522.3.100.2.6 | Standard information to support configuration of the 802.11 protocol. | ||
| awc802dot11GroupExt1 | 1.3.6.1.4.1.522.3.100.2.23 | Configuration information for IEEE 802.11 radio driver and firmware. | ||
| awcAaa | 1.3.6.1.4.1.522.3.19 | |||
| awcAaaAuthConfig | 1.3.6.1.4.1.522.3.19.4 | |||
| STR awcAaaClientName | 1.3.6.1.4.1.522.3.19.1.1.6 | DisplayString | read-write | The name the Access Point uses to identify itself when acting as the supplicant. |
| awcAaaGroup | 1.3.6.1.4.1.522.3.100.2.19 | Standard information to support configuration of RADIUS and TACACS+ client operation. | ||
| T/F awcAaaServer8021xCapabilityEnabled | 1.3.6.1.4.1.522.3.19.1.1.8 | TruthValue | read-write | Is this server to be used for 802.1X authentication? |
| INT awcAaaServerAdminAuthCurrent | 1.3.6.1.4.1.522.3.19.4.4 | INTEGER | read-only | The index of the currently selected AAA server for the Access Point administrator authentication function. A value of zero indicates that no authentication server is available to service admin login authentication function to this AP. The value of 1 to 4 indicates the corresponding server in use for the AP admin authentication function. |
| T/F awcAaaServerAdminAuthEnabled | 1.3.6.1.4.1.522.3.19.1.1.10 | TruthValue | read-write | Is this server to be used for AP Admin authentication? |
| INT awcAaaServerDot1xAuthCurrent | 1.3.6.1.4.1.522.3.19.4.2 | INTEGER | read-only | The index of the currently selected AAA server for 802.1X user authentication. A value of zero indicates that no authentication server is available to service 802.1X authentication function to this AP. The value of 1 to 4 indicates the corresponding server for 802.1X authentication. |
| awcAaaServerEntry | 1.3.6.1.4.1.522.3.19.1.1 | not-accessible | An entry provide the AAA server usage priority, protocol, name, IP port, request timeout, and authentication mechanisms supported. | |
| INT awcAaaServerMacAddrAuthCurrent | 1.3.6.1.4.1.522.3.19.4.3 | INTEGER | read-only | The index of the currently selected AAA server for MAC address authentication. A value of zero indicates that no authentication server is available to service MAC address authentication function to this AP. The value of 1 to 4 indicates the corresponding server in use for MAC address authentication function. |
| T/F awcAaaServerMacAddrAuthEnabled | 1.3.6.1.4.1.522.3.19.1.1.9 | TruthValue | read-write | Is this server to be used for MAC-address authentication? |
| U32 awcAaaServerMaxRetransmission | 1.3.6.1.4.1.522.3.19.1.1.12 | Unsigned32 | read-write | The maximum number of retransmission of a request. If an Access Point does not receive a response within awcAaaServerTimeout, it retransmits the request. If no response is received for a maximum number of retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen temporarily. |
| INT awcAaaServerMipAuthCurrent | 1.3.6.1.4.1.522.3.19.4.5 | INTEGER | read-only | The index of the currently selected AAA server used to retrieve authentication data requied for Proxy Mobile registration and authentication function. A value of zero indicates that no authentication server is available for this function. The value of 1 to 4 indicates the corresponding server in use for proxy mobile IP related authentication function. |
| T/F awcAaaServerMipAuthEnabled | 1.3.6.1.4.1.522.3.19.1.1.11 | TruthValue | read-write | Is this server to be used for Proxy Mobile IP authentication? |
| STR awcAaaServerName | 1.3.6.1.4.1.522.3.19.1.1.3 | DisplayString | read-write | The DNS-resolvable name or numeric IP address of the AAA server. |
| U32 awcAaaServerPort | 1.3.6.1.4.1.522.3.19.1.1.4 | Unsigned32 | read-write | The IP port number of the AAA server. |
| U32 awcAaaServerPrimaryReattemptPeriod | 1.3.6.1.4.1.522.3.19.4.1 | Unsigned32 | read-write | While the primary authentication server serving a given authentication function is not reachable, the duration, in minutes, at which the AP should reattempt to return to its primary server serving that authentication function. A value of zero indicates that primary authentication server reattempt is disabled. |
| INT awcAaaServerPriority | 1.3.6.1.4.1.522.3.19.1.1.1 | INTEGER | read-only | The priority of the server for when multiple servers are configured for the same service. Lower priority servers are used, in sequence, as backups. |
| INT awcAaaServerProtocol | 1.3.6.1.4.1.522.3.19.1.1.2 | INTEGER | read-write | The protocol used to communicate with the AAA server. |
| STR awcAaaServerSharedSecret | 1.3.6.1.4.1.522.3.19.1.1.7 | DisplayString | read-write | The textual string shared between the AAA server and the access point, used to authenticate the messages delivered between them. |
| awcAaaServerTable | 1.3.6.1.4.1.522.3.19.1 | not-accessible | This table provides information of AAA servers currently available to this access point and the parameters used to connect to the servers. Each entry corresponds to an AAA server and is indexed by the priority in which the server should be used. AAA server of lowest priority value should be used first. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent. | |
| U32 awcAaaServerTimeout | 1.3.6.1.4.1.522.3.19.1.1.5 | Unsigned32 | read-write | The amount of time (in seconds) that an Access Point should wait for a response from the AAA server before retransmitting the request. If the Access Point does not receive a response within the timeout period, it retransmits the request. If no response is received for a maximum of awcAaaServerMaxRetransmission retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen. If the AP and the AAA server are connected through a low-speed network and the awcAaaServerTimeout value is set to too low, the network may become congested, as the AP retransmits unacknowledged requests that have not yet reached the server |
| STR awcAcctClientName | 1.3.6.1.4.1.522.3.19.2.1.8 | DisplayString | read-write | The name the Access Point uses to identify itself when acting as the supplicant. |
| awcAcctConfig | 1.3.6.1.4.1.522.3.19.3 | |||
| T/F awcAcctEnable | 1.3.6.1.4.1.522.3.19.3.1 | TruthValue | read-write | The boolean indicating if the accounting is enabled. |
| T/F awcAcctGeneralEnabled | 1.3.6.1.4.1.522.3.19.2.1.10 | TruthValue | read-write | Is this server to be used for accounting without security AUTH? |
| T/F awcAcctSecureEnabled | 1.3.6.1.4.1.522.3.19.2.1.9 | TruthValue | read-write | Is this server to be used for accounting with security AUTH? |
| awcAcctServerEntry | 1.3.6.1.4.1.522.3.19.2.1 | not-accessible | An entry provide the AAA server usage priority, protocol, name, IP port, request timeout, and security mechanisms supported. | |
| U32 awcAcctServerMaxRetransmission | 1.3.6.1.4.1.522.3.19.2.1.12 | Unsigned32 | read-write | The maximum number of retransmissions of an accounting request. If an Access Point does not receive a response within awcAcctServerTimeout, it retransmits the request. If no response is received for a maximum number of retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen. |
| STR awcAcctServerName | 1.3.6.1.4.1.522.3.19.2.1.3 | DisplayString | read-write | The DNS-resolvable name or numeric IP address of the AAA server. |
| U32 awcAcctServerPort | 1.3.6.1.4.1.522.3.19.2.1.4 | Unsigned32 | read-write | The IP port number of the AAA server. |
| INT awcAcctServerPriority | 1.3.6.1.4.1.522.3.19.2.1.1 | INTEGER | read-only | The priority of the server for when multiple servers are configured for the same service. Lower priority servers are used, in sequence, as backups. |
| INT awcAcctServerProtocol | 1.3.6.1.4.1.522.3.19.2.1.2 | INTEGER | read-write | The protocol used to communicate with the AAA server. |
| STR awcAcctServerSharedSecret | 1.3.6.1.4.1.522.3.19.2.1.11 | DisplayString | read-write | The textual string shared between the ACCT server and the access point, used to authenticate the messages delivered between them. |
| awcAcctServerTable | 1.3.6.1.4.1.522.3.19.2 | not-accessible | This table provides information of AAA accounting servers currently available to this access point and the parameters used to connect to the servers. Each entry corresponds to an AAA server and is indexed by the priority in which the server should be used. AAA server of lowest priority value should be used first. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent. | |
| U32 awcAcctServerTimeout | 1.3.6.1.4.1.522.3.19.2.1.5 | Unsigned32 | read-write | The amount of time (in seconds) that an Access Point should wait for a response from the Accounting server before retransmitting the request. If the Access Point does not receive a response within the timeout period, it retransmits the request. If no response is received for a maximum of awcAcctServerMaxRetransmission retransmissions, the server is considered not reachable and a secondary server (if any) will be chosen. If the AP and the Accounting server are connected through a low-speed network and the awcAcctServerTimeout value is set to too low, the network may become congested, as the AP retransmits unacknowledged accounting requests that have not yet reached the server |
| U32 awcAcctServerUpdateDelay | 1.3.6.1.4.1.522.3.19.2.1.7 | Unsigned32 | read-write | The amount of time (in seconds) that the Access Point should send to the AAA server an update of accounting information. |
| T/F awcAcctServerUpdateEnable | 1.3.6.1.4.1.522.3.19.2.1.6 | TruthValue | read-write | Is the Acct update to this server enabled?. |
| T/F awcAcctStopDelayEnable | 1.3.6.1.4.1.522.3.19.3.2 | TruthValue | read-write | The boolean indicating if the accounting stop request should be delayed before sent. |
| U32 awcAcctStopDelayTime | 1.3.6.1.4.1.522.3.19.3.3 | Unsigned32 | read-write | The duration for the AP to delay sending the STOP message if any. |
| T/F awcConsoleAutoApply | 1.3.6.1.4.1.522.3.8.7 | TruthValue | read-write | The current state of 'auto apply' mode on the console browser. |
| awcDdpIAPP | 1.3.6.1.4.1.522.3.17 | |||
| awcDdpIAPPGroup | 1.3.6.1.4.1.522.3.100.2.17 | Standard information to support operation of the DDP and IAPP protocols. | ||
| U32 awcDevID | 1.3.6.1.4.1.522.3.1.6 | Unsigned32 | read-only | The Aironet DDP protocol device ID of the system when using the full capabilities with which the system is licensed. Note that a system may be configured to use fewer capabilities that those for which it is licensed. For example, a Bridge may be configured for use as an Access Point. |
| STR awcDevIDtxt | 1.3.6.1.4.1.522.3.1.7 | DisplayString | read-only | Textual representation of awcDevID. Max. string length is 128 octets. |
| awcDnsRes | 1.3.6.1.4.1.522.3.9 | |||
| awcDnsResGroup | 1.3.6.1.4.1.522.3.100.2.9 | Standard information to support configuration of the DNS Resolver. | ||
| awcDot11AccessPointCountersEntry | 1.3.6.1.4.1.522.3.6.1.10.1 | not-accessible | Each entry contains counters of frame transmissions and client associations for a radio interface. | |
| awcDot11AccessPointCountersTable | 1.3.6.1.4.1.522.3.6.1.10 | not-accessible | This table includes radio statistics collected by the IEEE 802.11 radio interface. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71). | |
| T/F awcDot11AllowAssocBroadcastSSID | 1.3.6.1.4.1.522.3.6.1.1.1.4 | TruthValue | read-write | If true and awcDot11StationRole is either roleAP or roleRepeater, the radio will respond to Broadcast SSID Probe Requests and will broadcast its own SSID within its Beacons. If false, the radio will not respond to the Broadcast SSID and will not broadcast its SSID within Beacons. |
| T/F awcDot11AllowEncrypted | 1.3.6.1.4.1.522.3.6.1.5.1.2 | TruthValue | read-write | When this attribute is true, the STA shall indicate at the MAC service interface received MSDUs regardless of the setting of the WEP subfield of the Frame Control field, so long as the dot11ExcludeUnencrypted attribute is false. The default value of this attribute shall be false. |
| INT awcDot11AssignedAID | 1.3.6.1.4.1.522.3.6.1.9.1.1 | INTEGER | read-only | An AID which shall be reserved for the exclusive use of a single Station. |
| awcDot11AssignedAIDEntry | 1.3.6.1.4.1.522.3.6.1.9.1 | not-accessible | An entry in the awcDot11AssignedAIDTable table. | |
| awcDot11AssignedAIDTable | 1.3.6.1.4.1.522.3.6.1.9 | not-accessible | When the radio is not functioning as a client station (i.e., awcDot11StationRole is not 'roleClient'), this is the list of AIDs which this agent will assign to the clients associating with it. An AID is assigned if the corresponding MAC address matches that of the client. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71). | |
| MAC awcDot11AssignedSTA | 1.3.6.1.4.1.522.3.6.1.9.1.2 | MacAddress | read-write | The Station (MAC address) which, when Associated to this system, shall always be assigned awcDot11AssignedAID as its 802.11 AID. |
| C32 awcDot11AssociatedStationCount | 1.3.6.1.4.1.522.3.6.1.10.1.1 | Counter32 | read-only | Total number of successful 802.11 Association Request operations to this radio of this access point since system startup. |
| C32 awcDot11AuthenticatedStationCount | 1.3.6.1.4.1.522.3.6.1.10.1.2 | Counter32 | read-only | Total number of successful 802.11 MAC-level Authentication operations to this radio of this access point since system startup. |
| AWC awcDot11AuthenticateFailDisposition | 1.3.6.1.4.1.522.3.14.26 | AwcDot11EventDisposition | read-write | Specifies how standard IEEE trap dot11AuthenticateFail is handled on the system. |
| awcDot11AuthenticationAlgorithmsEntry | 1.3.6.1.4.1.522.3.6.1.2.1 | not-accessible | Each entry specifies Cisco Aironet product specific authentication algorithm configuration attributes of the dot11DesiredSSID on a radio interface. | |
| I32 awcDot11AuthenticationAlgorithmsIndex | 1.3.6.1.4.1.522.3.6.1.2.1.1 | Integer32 | not-accessible | The auxiliary variable used to identify instances of the columnar objects in the Aironet Authentication Algorithms Table. This variable corresponds directly to the 802.11 dot11AuthenticationAlgorithmsIndex. |
| awcDot11AuthenticationAlgorithmsTable | 1.3.6.1.4.1.522.3.6.1.2 | not-accessible | This table contains attributes to configure authentication algorithm parameters for associations through the SSID defined by IEEE802dot11-MIB dot11DesiredSSID object. It defines attributes additional to those defined in the IEEE802dot11-MIB dot11AuthenticationAlgorithmsTable. An interface may support multiple authentication algorithms. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71). This table uses the dot11AuthenticationAlgorithmsIndex of the dot11AuthenticationAlgorithmsTable defined in the IEEE802dot11-MIB as the expansion index. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent. | |
| OCT awcDot11AuthenticationDefaultUcastAllowedToGoTo | 1.3.6.1.4.1.522.3.6.1.2.1.3 | OCTET STRING | read-write | The set of ports to which frames received from a specific port and destined for a MAC address which is not already listed in dot1dStaticTable and authenticates with the corresponding dot11AuthenticationAlgorithm, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length. |
| T/F awcDot11AuthenticationRequireEAP | 1.3.6.1.4.1.522.3.6.1.2.1.2 | TruthValue | read-write | If true, stations authenticating with the corresponding dot11AuthenticationAlgorithm must complete network-level EAP authentication before they will be unblocked. If false, stations authenticating with the corresponding dot11AuthenticationAlgorithm will be unblocked as soon as they complete the requirements of 802.11 authentication. |
| awcDot11AuxiliarySSIDEntry | 1.3.6.1.4.1.522.3.6.1.7.1 | not-accessible | An entry in the awcDot11AuxiliarySSIDTable table. | |
| INT awcDot11AuxiliarySSIDLength | 1.3.6.1.4.1.522.3.6.1.1.1.12 | INTEGER | read-only | The maximum number of entries in awcDot11AuxiliarySSIDTable. If awcDot11MultipleSSIDPerBSSImplemented is FALSE, awcDot11AuxiliarySSIDLength must be 0. |
| awcDot11AuxiliarySSIDTable | 1.3.6.1.4.1.522.3.6.1.7 | not-accessible | When the radio is not in roleClient, a list of Stations which, when Associated to this system, shall always have the same AID. | |
| OCT awcDot11AuxSSID | 1.3.6.1.4.1.522.3.6.1.7.1.2 | OCTET STRING | read-write | This attribute reflects a Service Set ID recognized by the access point. The access point shall respond to Probe Requests specifying this SSID, but does not advertise this SSID in its Beacons. |
| OCT awcDot11AuxSSIDAuthAlgDefaultUcastAllowedToGoTo | 1.3.6.1.4.1.522.3.6.1.8.1.4 | OCTET STRING | read-write | The set of ports to which frames received from a specific port and destined for a MAC address which is not already listed in dot1dStaticTable and authenticates to the SSID specified by awcDot11AuxSSIDIndex with the corresponding dot11AuthenticationAlgorithm, are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length. |
| T/F awcDot11AuxSSIDAuthAlgEnable | 1.3.6.1.4.1.522.3.6.1.8.1.2 | TruthValue | read-write | If true, stations may authenticate to the SSID specified by awcDot11AuxSSIDIndex with the algorithm corresponding to dot11AuthenticationAlgorithmsIndex. |
| awcDot11AuxSSIDAuthAlgEntry | 1.3.6.1.4.1.522.3.6.1.8.1 | not-accessible | An Entry (conceptual row) in the Aironet Auxiliary SSID Authentication Algorithms Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |
| I32 awcDot11AuxSSIDAuthAlgIndex | 1.3.6.1.4.1.522.3.6.1.8.1.1 | Integer32 | not-accessible | The auxiliary variable used to identify instances of the columnar objects in the Aironet Auxiliary SSID Authentication Algorithms Table. This variable corresponds directly to the 802.11 dot11AuthenticationAlgorithmsIndex. |
| T/F awcDot11AuxSSIDAuthAlgRequireEAP | 1.3.6.1.4.1.522.3.6.1.8.1.3 | TruthValue | read-write | If true, stations authenticating to the SSID specified by awcDot11AuxSSIDIndex with the corresponding dot11AuthenticationAlgorithm must complete network-level EAP authentication before they will be unblocked. If false, stations authenticating with the corresponding dot11AuthenticationAlgorithm will be unblocked as soon as they complete the requirements of 802.11 authentication. |
| awcDot11AuxSSIDAuthAlgTable | 1.3.6.1.4.1.522.3.6.1.8 | not-accessible | This (conceptual) table of attributes shall be a set of all the Aironet-specific parameters for each authentication algorithm supported by the station for each auxiliary SSID listed in awcDot11AuxiliarySSIDTable. | |
| AWC awcDot11AuxSSIDDefaultPolId | 1.3.6.1.4.1.522.3.6.1.7.1.6 | AwcPolId | read-write | Default Policy Group Identifier for stations Associated to this access point over awcDot11AuxSSID. A value of 0 indicates that no special policies are to be applied by default. |
| AWC awcDot11AuxSSIDDefaultVlanId | 1.3.6.1.4.1.522.3.6.1.7.1.7 | AwcVlanId | read-write | Default VLAN Identifier for stations Associated to this access point over awcDot11AuxSSID. A value of 0 indicates that either VLANs are disabled or that the default VLAN is awcNativeVlanId. |
| T/F awcDot11AuxSSIDEnableProxyMobileIP | 1.3.6.1.4.1.522.3.6.1.7.1.8 | TruthValue | read-write | If true, Proxy Mobile IP is enabled for use by all stations Associated to this access point over awcDot11AuxSSID. |
| INT awcDot11AuxSSIDIndex | 1.3.6.1.4.1.522.3.6.1.7.1.1 | INTEGER | read-only | Identifier of auxiliary SSIDs supported by the access point in addition to dot11DesiredSSID. Domain from 1 to awcDot11AuxiliarySSIDLength. |
| INT awcDot11AuxSSIDMaxAssociatedSTA | 1.3.6.1.4.1.522.3.6.1.7.1.3 | INTEGER | read-write | The maximum number of 802.11 Stations which may Associate with this access point through awcDot11AuxSSID. If 0, the maximum number is limited only by the 802.11 standard and by any hardware or radio firmware limitations of the access point. |
| INT awcDot11AuxSSIDNumAssociatedSTA | 1.3.6.1.4.1.522.3.6.1.7.1.4 | INTEGER | read-only | The current number of 802.11 Stations which are Associated with this access point through awcDot11AuxSSID. |
| U32 awcDot11BridgeSpacing | 1.3.6.1.4.1.522.3.6.1.1.1.9 | Unsigned32 | read-write | If this device is the root side of a Bridge configuration, this value is the distance in kilometers reported between this device and its farthest non-root Bridge. |
| T/F awcDot11ChannelAutoEnabled | 1.3.6.1.4.1.522.3.6.4.5.1.3 | TruthValue | read-write | If true and awcDot11StationRole is roleAP, the radio will scan for other BSS activity on all channels available in the current awcDot11CurrentCarrierSet before establishing its own BSS. After the scan, this station will establish its own BSS on the channel it considers to have the least probability of congestion. If false, this station always establishes its BSS on dot11CurrentChannel. |
| T/F awcDot11ChannelAutoImplemented | 1.3.6.1.4.1.522.3.6.4.5.1.2 | TruthValue | read-only | If true, the radio can, when awcDot11StationRole is roleAP, scan for other BSS activity on all channels available in the current awcDot11CurrentCarrierSet before establishing its own BSS. If false, the radio can only establish its BSS on dot11CurrentChannel. |
| INT awcDot11ChanSelectChannel | 1.3.6.1.4.1.522.3.6.4.12.1.1 | INTEGER | read-only | 802.11 channel which is a candidate for low-occupancy scanning. |
| T/F awcDot11ChanSelectEnable | 1.3.6.1.4.1.522.3.6.4.12.1.2 | TruthValue | read-write | If true, awcDot11ChanSelectChannel is available for the system to use as its awcDot11CurrentChannel after scanning for channel occupancy. If false, awcDot11ChanSelectChannel is not available. |
| awcDot11ChanSelectEntry | 1.3.6.1.4.1.522.3.6.4.12.1 | not-accessible | Each entry specifies if a particular radio channel is enabled on a radio interface. | |
| awcDot11ChanSelectTable | 1.3.6.1.4.1.522.3.6.4.12 | not-accessible | This table specifies for each 802.11 channel, whether the scanning process controlled by the awcDot11ChannelAutoEnabled can select a particular channel for use. This table has an expansion dependent relationship on the ifTable. For each entry in this table, there exists at least an entry in the ifTable of ifType ieee80211(71). Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent. | |
| T/F awcDot11Compatible3100 | 1.3.6.1.4.1.522.3.6.4.4.1.1 | TruthValue | read-write | Boolean on whether or not the Station should use 1Mb/sec management frames to be compatible with Aironet 3100 series radios. |
| T/F awcDot11Compatible4500 | 1.3.6.1.4.1.522.3.6.4.5.1.1 | TruthValue | read-write | Boolean on whether or not the Station should use 2Mb/sec management frames to be compatible with Aironet 4500 series radios. |
| awcDot11CountersEntry | 1.3.6.1.4.1.522.3.6.2.2.1 | not-accessible | Each entry contains counters of frame transmissions for a radio interface. | |
| awcDot11CountersTable | 1.3.6.1.4.1.522.3.6.2.2 | not-accessible | This table contains MAC statistics on each of IEEE 802.11 interface. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an entry in the ifTable of ifType ieee80211(71). | |
| INT awcDot11CurrentCarrierSet | 1.3.6.1.4.1.522.3.6.4.1.1.1 | INTEGER | read-only | The carrier set of the device. The Carrier Set implies a Regulatory Domain, but geographic-specific restrictions within a Regulatory Domain may necessitate several Carrier Sets within the Regulatory Domain. |
| INT awcDot11CurrentChannel | 1.3.6.1.4.1.522.3.6.4.5.1.4 | INTEGER | read-only | The current operating frequency channel of the DSSS PHY, as selected either by selective scanning or via dot11CurrentChannel. Valid channel numbers are as defined in 15.4.6.2 |
| C32 awcDot11DeauthenticateCount | 1.3.6.1.4.1.522.3.6.1.10.1.5 | Counter32 | read-only | Total number of Deauthenticate frames sent over this radio of this access point since system startup. |
| AWC awcDot11DeauthenticateDisposition | 1.3.6.1.4.1.522.3.14.27 | AwcDot11EventDisposition | read-write | Specifies how standard IEEE 802.11 trap dot11Deauthenticate is handled on the system. |
| C32 awcDot11DecapAccessMMH | 1.3.6.1.4.1.522.3.6.1.10.1.12 | Counter32 | read-only | Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm specifically due to cryptographic key-mismatch errors. |
| C32 awcDot11DecapErrorsMMH | 1.3.6.1.4.1.522.3.6.1.10.1.10 | Counter32 | read-only | Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm. |
| C32 awcDot11DecapExistsMMH | 1.3.6.1.4.1.522.3.6.1.10.1.11 | Counter32 | read-only | Total number of packets received over this radio of this access point since system startup which have failed MIC validation with the MMH algorithm specifically due to sequence number and duplicate packet errors. |
| C32 awcDot11DecapPktsMMH | 1.3.6.1.4.1.522.3.6.1.10.1.8 | Counter32 | read-only | Total number of packets received over this radio of this access point since system startup and for which a MIC has been requested to be validated with the MMH algorithm. |
| MAC awcDot11DesiredBSS | 1.3.6.1.4.1.522.3.6.1.6.1.2 | MacAddress | read-write | The BSS identifier (MAC address) of the Access Point with which the radio should try to Associate, or 00:00:00:00:00:00 if the BSS identifier for this priority is unspecified. |
| awcDot11DesiredBSSEntry | 1.3.6.1.4.1.522.3.6.1.6.1 | not-accessible | An entry in the awcDot11DesiredBSSTable table. | |
| INT awcDot11DesiredBSSIndex | 1.3.6.1.4.1.522.3.6.1.6.1.1 | INTEGER | read-only | The priority order in which Preferred Access Points should be probed. Lower indices are probed first. |
| INT awcDot11DesiredBSSLength | 1.3.6.1.4.1.522.3.6.1.1.1.6 | INTEGER | read-only | The number of entries in awcDot11DesiredBSSTable. |
| awcDot11DesiredBSSTable | 1.3.6.1.4.1.522.3.6.1.6 | not-accessible | When the radio is not in roleAP, a list of preferred Access Points with which the radio should Associate. In tabular form to allow for multiple instances on an agent. | |
| AWC awcDot11DesiredSSIDDefaultPolId | 1.3.6.1.4.1.522.3.6.1.1.1.19 | AwcPolId | read-write | Default Policy Group Identifier for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. A value of 0 indicates that no special policies are to be applied by default. |
| AWC awcDot11DesiredSSIDDefaultVlanId | 1.3.6.1.4.1.522.3.6.1.1.1.20 | AwcVlanId | read-write | Default VLAN Identifier for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. A value of 0 indicates that either VLANs are disabled or that the default VLAN is awcNativeVlanId. |
| T/F awcDot11DesiredSSIDEnableProxyMobileIP | 1.3.6.1.4.1.522.3.6.1.1.1.21 | TruthValue | read-write | If true, Proxy Mobile IP is enabled for use by all stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. |
| T/F awcDot11DesiredSSIDInfrastructureWGB | 1.3.6.1.4.1.522.3.6.1.1.1.18 | TruthValue | read-write | When true, Workgroup Bridge-class devices Associated to this access point through either the Broadcast SSID or dot11DesiredSSID are provided the class of service which is provided to network infrastructure stations by their parent access point. This includes use of the 802.11 reliable multicast protocol (4-address packets for multicast). When false, Workgroup Bridge-class devices are provided the class of service which is provided to ordinary client stations. |
| INT awcDot11DesiredSSIDMaxAssociatedSTA | 1.3.6.1.4.1.522.3.6.1.1.1.10 | INTEGER | read-write | The maximum number of 802.11 Stations which may Associate with this access point through either the Broadcast SSID or through dot11DesiredSSID. If 0, the maximum number is limited only by the 802.11 standard and by any hardware or radio firmware limitations of the access point. |
| AWC awcDot11DesiredSSIDMicAlgorithm | 1.3.6.1.4.1.522.3.6.1.1.1.16 | AwcDot11MicAlgorithm | read-write | Auxiliary Message Integrity Check (MIC) calculated on WEP-encoded packets of stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. |
| INT awcDot11DesiredSSIDNumAssociatedSTA | 1.3.6.1.4.1.522.3.6.1.1.1.11 | INTEGER | read-only | The current number of 802.11 Stations which are Associated with this access point through either the Broadcast SSID or through dot11DesiredSSID. |
| AWC awcDot11DesiredSSIDWEPKeyPermuteAlgorithm | 1.3.6.1.4.1.522.3.6.1.1.1.17 | AwcDot11WEPKeyPermuteAlgorithm | read-write | Function through which the WEP encryption key is permuted between key renewal periods for stations Associated to this access point through either the Broadcast SSID or dot11DesiredSSID. |
| C32 awcDot11DisassociateCount | 1.3.6.1.4.1.522.3.6.1.10.1.6 | Counter32 | read-only | Total number of Disassociate frames sent over this radio of this access point since system startup. |
| AWC awcDot11DisassociateDisposition | 1.3.6.1.4.1.522.3.14.28 | AwcDot11EventDisposition | read-write | Specifies how standard IEEE 802.11 trap dot11Disassociate is handled on the system. |
| C32 awcDot11EncapErrorsMMH | 1.3.6.1.4.1.522.3.6.1.10.1.9 | Counter32 | read-only | Total number of packets which have failed MIC calculation with the MMH algorithm before being submitted for transmission over this radio of this access point since system startup. |
| C32 awcDot11EncapPktsMMH | 1.3.6.1.4.1.522.3.6.1.10.1.7 | Counter32 | read-only | Total number of packets for which the a MIC has been requested to be calculated with the MMH algorithm before being submitted for transmission over this radio of this access point since system startup. |
| INT awcDot11EnetEncapsulationDefault | 1.3.6.1.4.1.522.3.6.1.1.1.7 | INTEGER | read-write | The Ethernet Encapsulation Transform type used within the BSS. Either IEEE 802.1H or RFC 1042 can be utilized. IEEE 802.1H provides exceptions for the Novel IPX and AARP protocols. |
| STR awcDot11FirmwareBootstrapVersion | 1.3.6.1.4.1.522.3.6.3.1.2.1.1 | DisplayString | read-only | The firmware version of the radio boot block. Max. string length is 128 octets. |
| T/F awcDot11ForceReqFirmwareVersion | 1.3.6.1.4.1.522.3.6.1.1.1.8 | TruthValue | read-write | If true, the radio driver will only allow operation with the specific radio firmware revision with which it was originally tested. If false, the radio driver will allow operation with the radio firmware revision with which it was tested, or any later radio firmware revision. |
| INT awcDot11InfrastructureSSID | 1.3.6.1.4.1.522.3.6.1.1.1.22 | INTEGER | read-write | Index of the SSID which all 802.11 infrastructure stations shall use for Association. If 0, an access point and its repeaters and other subordinate infrastructure devices will Associate through dot11DesiredSSID. If non-0, an access point and its subordinate infrastructure devices will Associate through the auxiliary SSID with awcDot11AuxSSIDIndex equal to awcDot11InfrastructureSSID. |
| T/F awcDot11InfrastructureSSIDExclusive | 1.3.6.1.4.1.522.3.6.1.1.1.25 | TruthValue | read-write | Should this access point restrict all infrastructure stations to associate only through the SSID specified by awcDot11InfrastructureSSID? |
| OCT awcDot11LEAPPassword | 1.3.6.1.4.1.522.3.6.1.5.1.5 | OCTET STRING | read-write | User Password (shared secret) assigned to the system for use when authenticating with AAA servers. |
| OCT awcDot11LEAPUserName | 1.3.6.1.4.1.522.3.6.1.5.1.4 | OCTET STRING | read-write | User Name assigned to the system for use when authenticating with AAA servers. |
| awcDot11mac | 1.3.6.1.4.1.522.3.6.2 | |||
| INT awcDot11ModulationType | 1.3.6.1.4.1.522.3.6.4.1.1.2 | INTEGER | read-write | The RF modulation of the radio. |
| T/F awcDot11MultipleSSIDPerBSSImplemented | 1.3.6.1.4.1.522.3.6.1.1.1.13 | TruthValue | read-only | This attribute, when TRUE, indicates that the station implementation is capable of responding to 802.11 Probe Requests for SSIDs other than dot11DesiredSSID. The default value of this attribute is FALSE. |
| INT awcDot11NonRootMobility | 1.3.6.1.4.1.522.3.6.1.1.1.27 | INTEGER | read-write | This object is used to determine if the radio should look for a better parent AP in heavy traffic condition when the awcDot11StationRole is roleClient(1) or roleRepeater(3). It will look for better parent if it is mobile(1) and will not look for better parent if it is stationary(2). |
| awcDot11phy | 1.3.6.1.4.1.522.3.6.4 | |||
| awcDot11PhyDSSSEntry | 1.3.6.1.4.1.522.3.6.4.5.1 | not-accessible | An entry in the awcDot11PhyDSSSTable table. | |
| awcDot11PhyDSSSTable | 1.3.6.1.4.1.522.3.6.4.5 | not-accessible | awcDot11PhyDSSSTable attributes. In tabular form to allow for multiple instances on an agent. | |
| awcDot11PhyFHSSEntry | 1.3.6.1.4.1.522.3.6.4.4.1 | not-accessible | An entry in the awcDot11PhyFHSSTable table. | |
| awcDot11PhyFHSSTable | 1.3.6.1.4.1.522.3.6.4.4 | not-accessible | awcDot11PhyFHSSTable attributes. In tabular form to allow for multiple instances on an agent. | |
| awcDot11PhyOperationEntry | 1.3.6.1.4.1.522.3.6.4.1.1 | not-accessible | An entry in the awcDot11PhyOperationTable table. | |
| awcDot11PhyOperationTable | 1.3.6.1.4.1.522.3.6.4.1 | not-accessible | awcDot11PhyOperationTable attributes. In tabular form to allow for multiple instances on an agent. | |
| INT awcDot11PHYType | 1.3.6.1.4.1.522.3.6.4.1.1.5 | INTEGER | read-only | This is an 8-bit integer value that identifies the PHY type supported by the attached PLCP and PMD. Currently defined values and their corresponding PHY types are: FHSS 2.4 GHz = 01 , DSSS 2.4 GHz = 02, IR Baseband = 03, DSSS 5.0 GHz = 11 |
| U32 awcDot11PowerManagementSubMode | 1.3.6.1.4.1.522.3.6.1.1.1.2 | Unsigned32 | read-write | When configured as roleClient, the Power Management Submode of the device. |
| INT awcDot11PreambleType | 1.3.6.1.4.1.522.3.6.4.1.1.3 | INTEGER | read-write | The current radio preamble type in use by the Station. Possible values: 1 = Use long preambles whenever possible. 2 = Use only short preambles. |
| awcDot11PrivacyEntry | 1.3.6.1.4.1.522.3.6.1.5.1 | not-accessible | An entry in the awcDot11PrivacyTable table. | |
| I32 awcDot11PrivacyOptionImplementedMaxRate | 1.3.6.1.4.1.522.3.6.1.1.1.5 | Integer32 | read-only | The maximum Transmit bit rate supported by the radio when using WEP encryption. Expressed in standard 802.11 increments of 500Kb/sec. |
| awcDot11PrivacyTable | 1.3.6.1.4.1.522.3.6.1.5 | not-accessible | Additional information about the WEP capabilities of the device. In tabular form to allow for multiple instances on an agent. | |
| T/F awcDot11QBSSElementEnabled | 1.3.6.1.4.1.522.3.6.1.1.1.24 | TruthValue | read-write | Should the Radio generate 802.11e QBSS elements in its Beacons and Probe Responses in support of 802.11 Quality of Service? |
| T/F awcDot11QBSSElementImplemented | 1.3.6.1.4.1.522.3.6.1.1.1.23 | TruthValue | read-only | This attribute, when TRUE, indicates that the station implementation is capable of generating 802.11e QBSS elements in its Beacons and Probe Responses. These elements enable support for basic 802.11 Quality of Service. The default value of this attribute is FALSE. |
| INT awcDot11QoSCoS | 1.3.6.1.4.1.522.3.6.2.4.1.1 | INTEGER | not-accessible | The auxiliary variable used to identify instances of the columnar objects in the Aironet Quality of Service Table. This variable corresponds directly to the 802.1D traffic category ID, plus 1. |
| INT awcDot11QoSCWmax | 1.3.6.1.4.1.522.3.6.2.4.1.3 | INTEGER | read-write | 802.11 CWmax of the traffic category. The value of this OID must be one of the set 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1023, and must be greater than or equal to awcDot11QoSCWmin. |
| INT awcDot11QoSCWmin | 1.3.6.1.4.1.522.3.6.2.4.1.2 | INTEGER | read-write | 802.11 CWmin of the traffic category. The value of this OID must be one of the set 0, 1, 3, 7, 15, 31, 63, 127, 255, 511, or 1023, and must be less than or equal to awcDot11QoSCWmax. |
| awcDot11QoSEntry | 1.3.6.1.4.1.522.3.6.2.4.1 | not-accessible | An Entry (conceptual row) in the Aironet Quality of Service Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |
| awcDot11QoSTable | 1.3.6.1.4.1.522.3.6.2.4 | not-accessible | This (conceptual) table of attributes shall be a set of parameters for each traffic category (i.e. 802.1D priority) of packet passed over the radio. | |
| C32 awcDot11ReassociatedStationCount | 1.3.6.1.4.1.522.3.6.1.10.1.3 | Counter32 | read-only | Total number of successful 802.11 Reassociation Request operations to this radio of this access point since system startup. |
| awcDot11res | 1.3.6.1.4.1.522.3.6.3 | |||
| awcDot11resAttribute | 1.3.6.1.4.1.522.3.6.3.1 | |||
| awcDot11ResourceInfoEntry | 1.3.6.1.4.1.522.3.6.3.1.2.1 | not-accessible | An entry in the awcDot11ResourceInfoTable table. | |
| awcDot11ResourceInfoTable | 1.3.6.1.4.1.522.3.6.3.1.2 | not-accessible | Resource Info Table attributes. In tabular form to allow for multiple instances on an agent. | |
| C32 awcDot11RoamedStationCount | 1.3.6.1.4.1.522.3.6.1.10.1.4 | Counter32 | read-only | Total number of times that clients which had successfully (re)associated with this access point successfully reassociated with another access point since system startup. |
| C32 awcDot11RxMacCrcErrorCount | 1.3.6.1.4.1.522.3.6.2.2.1.2 | Counter32 | read-only | Total number of frames received with MAC CRC errors since system startup. |
| T/F awcDot11SendIGMPGeneralQuery | 1.3.6.1.4.1.522.3.6.1.1.1.26 | TruthValue | read-write | Should this access point issue an IGMP General Query to all associated stations when they complete all required high-level authentication? Such an IGMP query can help configure multicast groups efficiently. |
| awcDot11smt | 1.3.6.1.4.1.522.3.6.1 | |||
| C32 awcDot11SsidMismatchCount | 1.3.6.1.4.1.522.3.6.2.2.1.3 | Counter32 | read-only | Total number of Beacon or Probe Response frames received for which the SSID does not match dot11DesiredSSID since system startup. |
| awcDot11StationConfigEntry | 1.3.6.1.4.1.522.3.6.1.1.1 | not-accessible | An entry in the awcDot11StationConfigTable table. | |
| awcDot11StationConfigTable | 1.3.6.1.4.1.522.3.6.1.1 | not-accessible | Station Config Table attributes. In tabular form to allow for multiple instances on an agent. | |
| INT awcDot11StationRole | 1.3.6.1.4.1.522.3.6.1.1.1.1 | INTEGER | read-write | The role of this station itself within the 802.11 BSS (radio cell) of which it is a member. |
| awcDot11SupportedDataRatesPrivacyEntry | 1.3.6.1.4.1.522.3.6.4.11.1 | not-accessible | An Entry (conceptual row) in the awcDot11SupportedDataRatesPrivacy Table. ifIndex - Each 802.11 interface is represented by an ifEntry. Interface tables in this MIB module are indexed by ifIndex. | |
| T/F awcDot11SupportedDataRatesPrivacyImplemented | 1.3.6.1.4.1.522.3.6.4.11.1.3 | TruthValue | read-only | Whether or not WEP encryption is supported by the radio for both Transmit and Receive operations at the corresponding bit rate specified by awcDot11SupportedDataRatesPrivacyValue. |
| I32 awcDot11SupportedDataRatesPrivacyIndex | 1.3.6.1.4.1.522.3.6.4.11.1.1 | Integer32 | read-only | Index object which identifies which data rate to access. Range is 1..8. |
| awcDot11SupportedDataRatesPrivacyTable | 1.3.6.1.4.1.522.3.6.4.11 | not-accessible | For each transmit and receive bit rate, whether or not the radio can support WEP encryption at that rate. | |
| I32 awcDot11SupportedDataRatesPrivacyValue | 1.3.6.1.4.1.522.3.6.4.11.1.2 | Integer32 | read-only | The receive or transmit bit rates supported by the PLCP and PMD, represented by a count from X02-X7f, corresponding to data rates in increments of 500Kb/s from 1 Mb/s to 63.5 Mb/s. |
| T/F awcDot11SymbolExtensionsEnabled | 1.3.6.1.4.1.522.3.6.1.1.1.15 | TruthValue | read-write | Should the Radio generate Symbol, Inc. proprietary elements in its Beacons and Probe Responses in support of Symbol VoIP phones? |
| T/F awcDot11SymbolExtensionsImplemented | 1.3.6.1.4.1.522.3.6.1.1.1.14 | TruthValue | read-only | This attribute, when TRUE, indicates that the station implementation is capable of generating Symbol, Inc. proprietary elements in its Beacons and Probe Responses. These elements enable support for Symbol Voice-over-IP (VoIP) phones. The default value of this attribute is FALSE. |
| MAC awcDot11TpFdbAddress | 1.3.6.1.4.1.522.3.12.5.1.1 | MacAddress | read-only | A MAC address for which the bridge has forwarding and/or filtering information. |
| U32 awcDot11TpFdbAID | 1.3.6.1.4.1.522.3.12.5.1.2 | Unsigned32 | read-only | AID with which the Station is associated with this system, or 2008 if the Station is not currently known to be associated. If the entry is multicast, awcDot11TpFdbAID is 0. Note that the uplink from a Client or Repeater AP to its parent is always AID 1. |
| U32 awcDot11TpFdbCapabilities | 1.3.6.1.4.1.522.3.12.5.1.11 | Unsigned32 | read-only | The possible 802.11 capabilities of the Station's radio. |
| AWC awcDot11TpFdbClientState | 1.3.6.1.4.1.522.3.12.5.1.3 | AwcDot11ClientState | read-only | 802.11 Service State of the Station. |
| MAC awcDot11TpFdbCurrentBSS | 1.3.6.1.4.1.522.3.12.5.1.15 | MacAddress | read-only | BSS to which the station is currently Associated, or 00:00:00:00:00:00 if the station's current AP is unknown. |
| awcDot11TpFdbEntry | 1.3.6.1.4.1.522.3.12.5.1 | not-accessible | Information about a specific MAC address for which the bridge has some forwarding and/or filtering information. | |
| U32 awcDot11TpFdbLatestRxSignalQuality | 1.3.6.1.4.1.522.3.12.5.1.10 | Unsigned32 | read-only | A device-dependent measure of the signal quality of the most recently received packet from this Station. |
| U32 awcDot11TpFdbLatestRxSignalStrength | 1.3.6.1.4.1.522.3.12.5.1.9 | Unsigned32 | read-only | A device-dependent measure of the signal strength of the most recently received packet from this Station. Might be normalized or unnormalized. |
| C32 awcDot11TpFdbLatestTxLongRetries | 1.3.6.1.4.1.522.3.12.5.1.7 | Counter32 | read-only | The number of 802.11 Long Retries incurred during the most recent packet Transmission Attempts to this Station. |
| C32 awcDot11TpFdbLatestTxShortRetries | 1.3.6.1.4.1.522.3.12.5.1.6 | Counter32 | read-only | The number of 802.11 Short Retries incurred during the most recent packet Transmission Attempts to this Station. |
| U32 awcDot11TpFdbListenInterval | 1.3.6.1.4.1.522.3.12.5.1.12 | Unsigned32 | read-only | The number of beacon intervals across which a the Station will sleep in power-save mode, or 1 if the Station will never be in power-save mode. |
| U32 awcDot11TpFdbPreferredTxRate | 1.3.6.1.4.1.522.3.12.5.1.14 | Unsigned32 | read-only | The transmission rate at which a packet should currently be transmitted from an AP to this Station. This rate does not carry information about whether or not the rate is in the Basic Rate Set (i.e. bit 0x80 is never set). |
| C32 awcDot11TpFdbRxWEPErrors | 1.3.6.1.4.1.522.3.12.5.1.8 | Counter32 | read-only | The total number of packets received from this Station which failed to be properly decrypted via the WEP security mechanism. |
| INT awcDot11TpFdbSSID | 1.3.6.1.4.1.522.3.12.5.1.16 | INTEGER | read-only | If the Station is Associated to this AP, the SSID via which the Station Associated. If 0, the Station Associated via dot11DesiredSSID. If greater than 0, the Station Associated through the auxiliary SSID with awcDot11AuxSSIDIndex equal to awcDot11TpFdbSSID. If -1, the Station is not currently Associated to this AP. |
| OCT awcDot11TpFdbSupportedDataRates | 1.3.6.1.4.1.522.3.12.5.1.13 | OCTET STRING | read-only | This attribute shall specify the set of data rates at which the station may transmit data. Each octet contains a value representing a rate. Each rate shall be within the range from 2 to 255, the lower seven bits 0..6 of which corresponding to data rates in increments of 500 kb/s from 1 Mb/s to 63.5 Mb/s, and shall be supported (as indicated in the supported rates table) for receiving data. This value is reported in transmitted Beacon, Probe Request, Probe Response, Association Request, Association Response, Reassociation Request, and Reassociation Response frames, and is used to determine whether a BSS with which the station desires to synchronize is suitable. If set, Bit 7 of the rate specification indicates that rate is a member of the Basic Rate Set of the access point. |
| awcDot11TpFdbTable | 1.3.6.1.4.1.522.3.12.5 | not-accessible | A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only 802.11-specific information about each entry. | |
| C32 awcDot11TpFdbTxLongRetries | 1.3.6.1.4.1.522.3.12.5.1.5 | Counter32 | read-only | The total number of 802.11 Long Retries incurred across all packet Transmission Attempts to this Station. |
| C32 awcDot11TpFdbTxShortRetries | 1.3.6.1.4.1.522.3.12.5.1.4 | Counter32 | read-only | The total number of 802.11 Short Retries incurred across all packet Transmission Attempts to this Station. |
| AWC awcDot11TpFdbVlanId | 1.3.6.1.4.1.522.3.12.5.1.17 | AwcVlanId | read-only | Numeric ID of the VLAN over which the Station is communicating. If 0, the Station is not known to be communicating over any specific VLAN. |
| C32 awcDot11TxDeferEnergyCount | 1.3.6.1.4.1.522.3.6.2.2.1.1 | Counter32 | read-only | Total number of frames deferred transmission due to energy detect since system startup. |
| T/F awcDot11UseAWCExtensions | 1.3.6.1.4.1.522.3.6.1.1.1.3 | TruthValue | read-write | If true, Aironet extensions to the basic 802.11 protocol are enabled. This results in better BSS performance and faster roaming. If false, only the basic 802.11 protocols are used. This ensures maximum compatibility with non-Aironet equipment. |
| INT awcDot11WEPDefaultKeyIndex | 1.3.6.1.4.1.522.3.6.1.3.1.1 | INTEGER | read-only | The auxiliary variable used to identify instances of the columnar objects in the WEP Default Keys Table. The value of this variable is equal to the WEPDefaultKeyID + 1 |
| INT awcDot11WEPDefaultKeyLen | 1.3.6.1.4.1.522.3.6.1.3.1.2 | INTEGER | read-write | Length in octets of awcDot11WEPDefaultKeyValue. If 0, the corresponding awcDot11WEPDefaultKeyValue is not configured. |
| INT awcDot11WEPDefaultKeyMaxIndex | 1.3.6.1.4.1.522.3.6.1.5.1.1 | INTEGER | read-only | The maximum WEP Default Key index which the radio supports. Range 1..4, or 0 if the radio does not support WEP. |
| awcDot11WEPDefaultKeysEntry | 1.3.6.1.4.1.522.3.6.1.3.1 | not-accessible | An entry in the awcDot11WEPDefaultKeysTable table. | |
| awcDot11WEPDefaultKeysTable | 1.3.6.1.4.1.522.3.6.1.3 | not-accessible | Extension of dot11WEPDefaultKeysTable to allow for key lengths other than 40 bits. | |
| WEP awcDot11WEPDefaultKeyValue | 1.3.6.1.4.1.522.3.6.1.3.1.3 | WEPKeytype128 | read-write | A WEP default secret key value. The value is write-only (attempt to read will result in return of a zero-length string). |
| INT awcDot11WEPKeyMaxLen | 1.3.6.1.4.1.522.3.6.1.5.1.3 | INTEGER | read-only | The maximum WEP Key Length which the radio supports. Range 0..16, or 0 if the radio does not support WEP. Note that, even if the radio supports more than 13 octets of key value, the current 802.11 standard only makes use of the first 13 octets. |
| U32 awcDot1dTpPortDefaultInEthertypeFilterId | 1.3.6.1.4.1.522.3.12.6.1.4 | Unsigned32 | read-write | awcPfEtSetId of the Ethertype Filter Set to apply to packets received over this port. If 0, no filters are applied. |
| U32 awcDot1dTpPortDefaultInIpPortFilterId | 1.3.6.1.4.1.522.3.12.6.1.8 | Unsigned32 | read-write | awcPfIptSetId of the IP Port Filter Set to apply to packets received over this port. If 0, no filters are applied. |
| U32 awcDot1dTpPortDefaultInIpProtoFilterId | 1.3.6.1.4.1.522.3.12.6.1.6 | Unsigned32 | read-write | awcPfIppSetId of the IP Protocol Filter Set to apply to packets received over this port. If 0, no filters are applied. |
| OCT awcDot1dTpPortDefaultNUcastAllowedToGoTo | 1.3.6.1.4.1.522.3.12.6.1.2 | OCTET STRING | read-write | The set of ports to which frames received from a specific port and destined for a multicast MAC address which is not already listed in dot1dStaticTable are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length. |
| U32 awcDot1dTpPortDefaultOutEthertypeFilterId | 1.3.6.1.4.1.522.3.12.6.1.5 | Unsigned32 | read-write | awcPfEtSetId of the Ethertype Filter Set to apply to packets transmitted over this port. If 0, no filters are applied. |
| U32 awcDot1dTpPortDefaultOutIpPortFilterId | 1.3.6.1.4.1.522.3.12.6.1.9 | Unsigned32 | read-write | awcPfIptSetId of the IP Port Filter Set to apply to packets transmitted over this port. If 0, no filters are applied. |
| U32 awcDot1dTpPortDefaultOutIpProtoFilterId | 1.3.6.1.4.1.522.3.12.6.1.7 | Unsigned32 | read-write | awcPfIppSetId of the IP Protocol Filter Set to apply to packets transmitted over this port. If 0, no filters are applied. |
| OCT awcDot1dTpPortDefaultUcastAllowedToGoTo | 1.3.6.1.4.1.522.3.12.6.1.1 | OCTET STRING | read-write | The set of ports to which frames received from a specific port and destined for a unicast MAC address which is not already listed in dot1dStaticTable are allowed to be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus, each port of the bridge is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the set of ports; the port is not included if its bit has a value of '0'. (Note that the setting of the bit corresponding to the port from which a frame is received is irrelevant.) The default value of this object is a string of ones of appropriate length. |
| awcDot1dTpPortEntry | 1.3.6.1.4.1.522.3.12.6.1 | not-accessible | A list of filtering information for each port of a transparent bridge. This information includes packet forwarding permission for unicast and non-unicast frames and filters ID used for the filtering. | |
| U32 awcDot1dTpPortMaxNUcastPerSecond | 1.3.6.1.4.1.522.3.12.6.1.3 | Unsigned32 | read-write | The maximum number of multicast packets allowed to be forwarded over the port each second. If 0, the number of multicasts is unlimited. |
| awcDot1dTpPortTable | 1.3.6.1.4.1.522.3.12.6 | not-accessible | A table that contains information about every port that is associated with this transparent bridge. This table contains information about host and protocol filtering for the port. Each entry represents a transparent bridge port on the device. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent. | |
| INT awcDscpToCosMapCos | 1.3.6.1.4.1.522.3.16.3.1.2 | INTEGER | read-write | A value of Class of Service (CoS) mapped to the DSCP value awcDscpToCosMapDscp. This object corresponds directly to the 802.1D traffic category ID, plus 1. The matching values are therefore in the range 1 through 8. The value 0 indicates that no matching CoS is configured for the corresponding awcDscpToCosMapDscp. |
| INT awcDscpToCosMapDscp | 1.3.6.1.4.1.522.3.16.3.1.1 | INTEGER | not-accessible | The auxiliary variable used to identify instances of the columnar objects in the Aironet Differentiated Services Code-Point (DSCP) to Class of Service (CoS) Mapping Table. This variable directly corresponds to a Differentiated Services Code-Point, plus 1. The value may be used for marking a traffic stream. |
| T/F awcDscpToCosMapEnable | 1.3.6.1.4.1.522.3.16.2 | TruthValue | read-write | If true, IP packets which are not already classified with a non-default Class of Service (CoS) can be classified by reference to their Differentiated Services Code-Point (DSCP) value. If false, unclassified IP packets are not subject to DSCP classification. |
| awcDscpToCosMapEntry | 1.3.6.1.4.1.522.3.16.3.1 | not-accessible | An Entry (conceptual row) in the Aironet DSCP To CoS mapping table to statically map a Differentiated Services Code-Point (DSCP) value to corresponding Class of Service (CoS) value. | |
| awcDscpToCosMapTable | 1.3.6.1.4.1.522.3.16.3 | not-accessible | This (conceptual) table to statically map Differentiated Services Code-Point (DSCP) values to corresponding Class of Service (CoS) values. | |
| U32 awcEtherCamSize | 1.3.6.1.4.1.522.3.15.7 | Unsigned32 | read-only | Number of entries in the hardware Content Addressible Memory MAC address filter available to the Ethernet controller. |
| INT awcEtherDuplex | 1.3.6.1.4.1.522.3.15.5 | INTEGER | read-only | Actual Ethernet interface duplex, after any line negotiation has taken place. |
| T/F awcEtherEnableSwCam | 1.3.6.1.4.1.522.3.15.8 | TruthValue | read-write | If true, the Ethernet driver makes use of a Software Content Addressible Memory when making packet-forwarding decisions. When true, forwarding decisions are much faster, but network statistics collection is much coarser. If false, all packet-forwarding decisions are made by the higher-level packet-bridging logic. |
| T/F awcEtherForcePortUnblock | 1.3.6.1.4.1.522.3.15.9 | TruthValue | read-write | If true, the Ethernet port has dot1dStpPortState forced to forwarding even when the Spanning Tree Protocol is not enabled. This provides rapid port re-establishment at the potential cost of not detecting network topology loops involving the Ethernet and other network interfaces such as the radio. If false, the Ethernet port is blocked whenever there exists the potential for a network topology loop and the Spanning Tree Protocol is not enabled to guard against such loops. |
| INT awcEtherIfSpeedSelect | 1.3.6.1.4.1.522.3.15.1 | INTEGER | read-write | Requested Ethernet interface speed and duplex. |
| INT awcEtherLostEthernetAction | 1.3.6.1.4.1.522.3.15.11 | INTEGER | read-write | Action taken by the system when a loss of backbone connectivity condition occurs for a period of time longer than awcEtherLostEthernetSeconds. |
| INT awcEtherLostEthernetSeconds | 1.3.6.1.4.1.522.3.15.10 | INTEGER | read-write | Number of seconds the system must detect loss of backbone connectivity (i.e. loss of Ethernet link and no active trunks available on any of the radios) before taking the action specified by awcEtherLostEthernetAction. |
| U32 awcEtherLostEthernetSSID | 1.3.6.1.4.1.522.3.15.12 | Unsigned32 | read-write | The single SSID index required by the system if awcEtherLostEthernetAction is restrictSSID and backbone connectivity is lost for a period of time longer than awcEtherLostEthernetSeconds. If 0, only Association to dot11DesiredSSID is allowed. If non-0, only Association to the auxiliary SSID with the corresponding awcDot11AuxSSIDIndex is allowed. |
| awcEtherMIB | 1.3.6.1.4.1.522.3.15 | |||
| awcEtherMIBGroup | 1.3.6.1.4.1.522.3.100.2.15 | Standard information to support operation of the Ethernet Controller. | ||
| awcEthernetLostGroup | 1.3.6.1.4.1.522.3.100.2.22 | Information to support AP in case Ethernet connection is lost. | ||
| T/F awcEventAlertSNMP | 1.3.6.1.4.1.522.3.14.11 | TruthValue | read-write | If true, events of a severity with Disposition set to notify will generate an SNMP trap. |
| T/F awcEventAlertSyslog | 1.3.6.1.4.1.522.3.14.12 | TruthValue | read-write | If true, events of a severity with Disposition set to notify will generate a sysLog message. |
| C32 awcEventCntSeverityExternalAlert | 1.3.6.1.4.1.522.3.14.14.9 | Counter32 | read-only | External Alert message counter. |
| C32 awcEventCntSeverityExternalInfo | 1.3.6.1.4.1.522.3.14.14.17 | Counter32 | read-only | External Info message counter. |
| C32 awcEventCntSeverityExternalWarning | 1.3.6.1.4.1.522.3.14.14.13 | Counter32 | read-only | External Warning message counter. |
| C32 awcEventCntSeverityNULLEx | 1.3.6.1.4.1.522.3.14.14.1 | Counter32 | read-only | NULL message counter. |
| C32 awcEventCntSeverityPortAlert | 1.3.6.1.4.1.522.3.14.14.8 | Counter32 | read-only | Port Alert message counter. |
| C32 awcEventCntSeverityPortFatal | 1.3.6.1.4.1.522.3.14.14.5 | Counter32 | read-only | Fatal Port message counter. |
| C32 awcEventCntSeverityPortInfo | 1.3.6.1.4.1.522.3.14.14.16 | Counter32 | read-only | Port Info message counter. |
| C32 awcEventCntSeverityPortWarning | 1.3.6.1.4.1.522.3.14.14.12 | Counter32 | read-only | Port Warning message counter. |
| C32 awcEventCntSeverityProtocolAlert | 1.3.6.1.4.1.522.3.14.14.7 | Counter32 | read-only | Protocol Alert message counter. |
| C32 awcEventCntSeverityProtocolFatal | 1.3.6.1.4.1.522.3.14.14.4 | Counter32 | read-only | Fatal Protocol message counter. |
| C32 awcEventCntSeverityProtocolInfo | 1.3.6.1.4.1.522.3.14.14.15 | Counter32 | read-only | Protocol Info message counter. |
| C32 awcEventCntSeverityProtocolWarning | 1.3.6.1.4.1.522.3.14.14.11 | Counter32 | read-only | Protocol Warning message counter. |
| C32 awcEventCntSeveritySilent | 1.3.6.1.4.1.522.3.14.14.2 | Counter32 | read-only | Silent message counter. |
| C32 awcEventCntSeveritySystemAlert | 1.3.6.1.4.1.522.3.14.14.6 | Counter32 | read-only | System Alert message counter. |
| C32 awcEventCntSeveritySystemFatal | 1.3.6.1.4.1.522.3.14.14.3 | Counter32 | read-only | Fatal system message counter. |
| C32 awcEventCntSeveritySystemInfo | 1.3.6.1.4.1.522.3.14.14.14 | Counter32 | read-only | System Info message counter. |
| C32 awcEventCntSeveritySystemWarning | 1.3.6.1.4.1.522.3.14.14.10 | Counter32 | read-only | System Warning message counter. |
| STR awcEventDescription | 1.3.6.1.4.1.522.3.14.23.1.4 | DisplayString | read-only | Detailed description of the event. |
| I32 awcEventDetailDefault | 1.3.6.1.4.1.522.3.14.7 | Integer32 | read-write | Detail level at which, by default, events are displayed. General detail level classifications are: 8 - no display at all 16 - sparse detail 24 - normal detail 32 - verbose detail 40 - exhaustive detail |
| T/F awcEventDisplayUptimeAscending | 1.3.6.1.4.1.522.3.14.6 | TruthValue | read-write | If true, time display in system uptime is measured from the time the system boots, forward. If false, time display in measured from the current time backwards. |
| T/F awcEventDisplayWallClockTime | 1.3.6.1.4.1.522.3.14.5 | TruthValue | read-write | If true, time display on the system's web pages and console is in wall-clock time. If false, time display is in system uptime. |
| awcEventDisposition | 1.3.6.1.4.1.522.3.14.15 | |||
| AWC awcEventDispSeverityExternalAlert | 1.3.6.1.4.1.522.3.14.15.9 | AwcEventDisposition | read-write | External Alert message disposition. |
| AWC awcEventDispSeverityExternalInfo | 1.3.6.1.4.1.522.3.14.15.17 | AwcEventDisposition | read-write | External Info message disposition. |
| AWC awcEventDispSeverityExternalWarning | 1.3.6.1.4.1.522.3.14.15.13 | AwcEventDisposition | read-write | External Warning message disposition. |
| AWC awcEventDispSeverityNULL | 1.3.6.1.4.1.522.3.14.15.1 | AwcEventDisposition | read-write | NULL message disposition. |
| AWC awcEventDispSeverityPortAlert | 1.3.6.1.4.1.522.3.14.15.8 | AwcEventDisposition | read-write | Port Alert message disposition. |
| AWC awcEventDispSeverityPortFatal | 1.3.6.1.4.1.522.3.14.15.5 | AwcEventDisposition | read-write | Fatal Port message disposition. |
| AWC awcEventDispSeverityPortInfo | 1.3.6.1.4.1.522.3.14.15.16 | AwcEventDisposition | read-write | Port Info message disposition. |
| AWC awcEventDispSeverityPortWarning | 1.3.6.1.4.1.522.3.14.15.12 | AwcEventDisposition | read-write | Port Warning message disposition. |
| AWC awcEventDispSeverityProtocolAlert | 1.3.6.1.4.1.522.3.14.15.7 | AwcEventDisposition | read-write | Protocol Alert message disposition. |
| AWC awcEventDispSeverityProtocolFatal | 1.3.6.1.4.1.522.3.14.15.4 | AwcEventDisposition | read-write | Fatal Protocol message disposition. |
| AWC awcEventDispSeverityProtocolInfo | 1.3.6.1.4.1.522.3.14.15.15 | AwcEventDisposition | read-write | Protocol Info message disposition. |
| AWC awcEventDispSeverityProtocolWarning | 1.3.6.1.4.1.522.3.14.15.11 | AwcEventDisposition | read-write | Protocol Warning message disposition. |
| AWC awcEventDispSeveritySilent | 1.3.6.1.4.1.522.3.14.15.2 | AwcEventDisposition | read-write | Silent message disposition. |
| AWC awcEventDispSeveritySystemAlert | 1.3.6.1.4.1.522.3.14.15.6 | AwcEventDisposition | read-write | System Alert message disposition. |
| AWC awcEventDispSeveritySystemFatal | 1.3.6.1.4.1.522.3.14.15.3 | AwcEventDisposition | read-write | Fatal system message disposition. |
| AWC awcEventDispSeveritySystemInfo | 1.3.6.1.4.1.522.3.14.15.14 | AwcEventDisposition | read-write | System Info message disposition. |
| AWC awcEventDispSeveritySystemWarning | 1.3.6.1.4.1.522.3.14.15.10 | AwcEventDisposition | read-write | System Warning message disposition. |
| awcEventEntry | 1.3.6.1.4.1.522.3.14.23.1 | not-accessible | An entry in awcEventTable. | |
| U32 awcEventID | 1.3.6.1.4.1.522.3.14.23.1.1 | Unsigned32 | read-only | System-unique identifier of the event. |
| awcEventLog | 1.3.6.1.4.1.522.3.14 | |||
| awcEventLogGroup | 1.3.6.1.4.1.522.3.100.2.14 | Standard information to support operation of the Event Log. | ||
| I32 awcEventOffsetGMT | 1.3.6.1.4.1.522.3.14.1 | Integer32 | read-write | The current offset from GMT in minutes. |
| AWC awcEventSeverity | 1.3.6.1.4.1.522.3.14.23.1.3 | AwcEventSeverity | read-only | Severity of the event. |
| AWC awcEventSeverityDispConsole | 1.3.6.1.4.1.522.3.14.8 | AwcEventSeverity | read-write | If an event has a severity level greater than or equal to awcEventSeverityDispConsole, it is displayed on the console shortly after it occurs. |
| AWC awcEventSeverityDispHtmlConsole | 1.3.6.1.4.1.522.3.14.10 | AwcEventSeverity | read-write | If an event has a severity level greater than or equal to awcEventSeverityDispHtmlConsole, it is displayed on the the Event Log console browser pages. |
| AWC awcEventSeverityDispHtmlGUI | 1.3.6.1.4.1.522.3.14.9 | AwcEventSeverity | read-write | If an event has a severity level greater than or equal to awcEventSeverityDispHtmlGUI, it is displayed on the the Event Log GUI web pages. |
| awcEventStatistics | 1.3.6.1.4.1.522.3.14.14 | |||
| STR awcEventSyslogAddr | 1.3.6.1.4.1.522.3.14.16 | DisplayString | read-write | The destination of a sysLog message. This address must be numeric or DNS resolvable. Max. string length is 128 octets. |
| INT awcEventSyslogFacility | 1.3.6.1.4.1.522.3.14.17 | INTEGER | read-write | The facility number encoded within a sysLog message. |
| awcEventTable | 1.3.6.1.4.1.522.3.14.23 | not-accessible | SNMP access to Event Log table. | |
| STR awcEventTime | 1.3.6.1.4.1.522.3.14.23.1.2 | DisplayString | read-only | System time at which the event occurred. |
| I32 awcEventTimestampGMT | 1.3.6.1.4.1.522.3.14.3 | Integer32 | read-write | GMT Time, in seconds since January 1, 1970, when the system wall-clock time was last set. |
| U32 awcEventTraceLogSize | 1.3.6.1.4.1.522.3.14.21 | Unsigned32 | read-write | Size in octets of the system Detailed Event Trace Buffer. Note that this buffer is statically allocated at system initialization time. Changing the size of the buffer requires a system reboot. |
| U32 awcEventTracePacketLen | 1.3.6.1.4.1.522.3.14.22 | Unsigned32 | read-write | Maximum size in octets of each Packet Trace Event recorded in the Detailed Event Trace Buffer. |
| AWC awcEventTraceStationSeverity | 1.3.6.1.4.1.522.3.14.20 | AwcEventSeverity | read-write | Severity at which all Detailed Packet Trace events shall be handled. |
| STR awcEventType | 1.3.6.1.4.1.522.3.14.23.1.5 | DisplayString | read-only | Specific type of the event. The type is unique for each test condition which can result in event generation. |
| I32 awcEventUptimeModifiedGMT | 1.3.6.1.4.1.522.3.14.4 | Integer32 | read-only | System uptime, in seconds, when the system wall-clock time was last set. |
| T/F awcEventUseCiscoFormat | 1.3.6.1.4.1.522.3.14.25 | TruthValue | read-write | If true, the system will generate syslog messages using Cisco standard EMBLEM- compliant format. If false, syslog will use legacy Aironet format. |
| T/F awcEventUseDaylightSavingsTime | 1.3.6.1.4.1.522.3.14.2 | TruthValue | read-write | If true, daylight savings time is used. |
| AWC awcFileXferCmdInvokeFileLoad | 1.3.6.1.4.1.522.3.4.5 | AwcInvokeCommand | read-write | Initiate loading of all specified files from the file server into the system FLASH. Commands recognized: start. |
| AWC awcFileXferCmdInvokeFileSave | 1.3.6.1.4.1.522.3.4.7 | AwcInvokeCommand | read-write | Initiate saving of all specified fileXferFile* files to the file server from the system FLASH. Commands recognized: start. |
| I32 awcFileXferCmdStatusFileLoad | 1.3.6.1.4.1.522.3.4.6 | Integer32 | read-only | Status of the most recent command to load the specified fileXferFile* files. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = At least one file was not found on the file server. 12 = Insufficient memory to load all files. 22 = No file specified, or invalid file format. 35 = File format of at least one of the files is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled. |
| I32 awcFileXferCmdStatusFileSave | 1.3.6.1.4.1.522.3.4.8 | Integer32 | read-only | Status of the most recent command to save the specified fileXferFile* files. Possible values: 0 = Operation completed successfully (or has not taken place). 1 = Insufficient permission to save the files. 2 = A directory specified for saving at least one of the files was not found. 22 = No file specified, or invalid file format. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled. |
| STR awcFileXferFileFirmwareRadio0 | 1.3.6.1.4.1.522.3.4.10 | DisplayString | read-write | The filename of the radio firmware image. Max. string length is 128 octets. |
| STR awcFileXferFileFirmwareRadio1 | 1.3.6.1.4.1.522.3.4.18 | DisplayString | read-write | The filename of the radio firmware image. Max. string length is 128 octets. |
| STR awcFileXferFileFirmwareSystem | 1.3.6.1.4.1.522.3.4.9 | DisplayString | read-write | The filename of the system firmware image. Max. string length is 128 octets. |
| STR awcFileXferFileFpgaPcmcia | 1.3.6.1.4.1.522.3.4.12 | DisplayString | read-write | The filename of the FPGA image for the PCMCIA controller. Max. string length is 128 octets. |
| STR awcFileXferFilesFLASH | 1.3.6.1.4.1.522.3.4.17 | DisplayString | read-write | The filename of a complete FLASH firmware image for the system, including all non-configuration files within the system FLASH file system. Max. string length is 128 octets. |
| STR awcFileXferFileWebUI | 1.3.6.1.4.1.522.3.4.11 | DisplayString | read-write | The filename of the system Web pages image. Max. string length is 128 octets. |
| STR awcFileXferFtpDirectory | 1.3.6.1.4.1.522.3.4.14 | DisplayString | read-write | Directory on defaultFileServer in which files are located. |
| STR awcFileXferPassword | 1.3.6.1.4.1.522.3.4.4 | DisplayString | read-write | The password of the user, as required by all FTP file transfers. Max. password length is 128 octets. |
| INT awcFileXferProtocol | 1.3.6.1.4.1.522.3.4.2 | INTEGER | read-write | The protocol to be used by the system for file transfer (TFTP or FTP). |
| INT awcFileXferTftpPort | 1.3.6.1.4.1.522.3.4.13 | INTEGER | read-write | IP port number over which to perform TFTP operations. Default 69. |
| STR awcFileXferUser | 1.3.6.1.4.1.522.3.4.3 | DisplayString | read-write | The name of the user, as required by all FTP file transfers. Max. name length is 128 octets. |
| T/F awcFirstBoot | 1.3.6.1.4.1.522.3.1.16 | TruthValue | read-write | If true, no user-specified configuration has been saved by the Access Point since either the system left Cisco manufacturing or since the user performed a Reset All System Factory Defaults operation. If false, a change in configuration has been saved by the user. Note that configurations specified solely via boot protocols such as DHCP or BOOTP are not considered user-specified for purposes of changing awcFirstBoot. |
| awcForwardTbl | 1.3.6.1.4.1.522.3.12 | |||
| awcForwardTblGroup | 1.3.6.1.4.1.522.3.100.2.12 | Standard information to support configuration of the Forwarding Table. | ||
| awcForwardTblGroupExt1 | 1.3.6.1.4.1.522.3.100.2.24 | Information to support configuration of the Forwarding Table. | ||
| I32 awcFtAccessPoint | 1.3.6.1.4.1.522.3.12.1.13 | Integer32 | read-only | Count of Access Point addresses observed by the system. |
| I32 awcFtBridge | 1.3.6.1.4.1.522.3.12.1.9 | Integer32 | read-only | Count of non-root Bridge addresses observed by the system. |
| I32 awcFtBridgeHost | 1.3.6.1.4.1.522.3.12.1.5 | Integer32 | read-only | Count of DS (infrastructure) host addresses observed by the system on the remote side of a bridge. |
| I32 awcFtBridgeRoot | 1.3.6.1.4.1.522.3.12.1.15 | Integer32 | read-only | Count of Root Bridge addresses observed by the system. |
| I32 awcFtBridgeSelf | 1.3.6.1.4.1.522.3.12.1.10 | Integer32 | read-only | Count of non-root Bridges which are Associated to the system. |
| I32 awcFtClientSTA | 1.3.6.1.4.1.522.3.12.1.7 | Integer32 | read-only | Count of Client Station addresses observed by the system. |
| I32 awcFtClientSTASelf | 1.3.6.1.4.1.522.3.12.1.8 | Integer32 | read-only | Count of Client Stations which are Associated to the system. |
| awcFtConfig | 1.3.6.1.4.1.522.3.12.2 | |||
| T/F awcFtDot1dTpFdbTableEnable | 1.3.6.1.4.1.522.3.12.2.15 | TruthValue | read-write | If true, the system will populate the dot1dTpFdbEntry MIB for all forwarding table entries. This improves management statistics. If false, the system will not populate the dot1dTpFdbEntry MIB for any forwarding table entries. This improves speed and memory utilization. |
| I32 awcFtDsHost | 1.3.6.1.4.1.522.3.12.1.3 | Integer32 | read-only | Count of DS (infrastructure) host addresses observed by the system over its own DS network interface (Ethernet). |
| T/F awcFtEnableAwcTpFdbTable | 1.3.6.1.4.1.522.3.12.2.11 | TruthValue | read-write | If true, the system will populate the awcTpFdbEntry MIB for all forwarding table entries. This improves management statistics. If false, the system will not populate the awcTpFdbEntry MIB for any forwarding table entries. This improves speed and memory utilization. |
| T/F awcFtEnableMacAuthServer | 1.3.6.1.4.1.522.3.12.2.12 | TruthValue | read-write | If true, the system will contact a AAA server for retrieving dot1dStaticTable information for new forwarding table entries if a dot1dStaticTable entry does not already exist for the host address. |
| T/F awcFtEnableMacOrEapAuth | 1.3.6.1.4.1.522.3.12.2.14 | TruthValue | read-write | If true, the system grants full access to those clients which have successfully completed either MAC or EAP authentication. |
| T/F awcFtEnableMcastMapping | 1.3.6.1.4.1.522.3.12.2.16 | TruthValue | read-write | If true, the system will map multicast forwarding table entries to the broadcast entry. This improves speed and memory utilization. If false, the system will create an entry for each unique multicast address. This improves management statistics and allows filtering of specific multicast addresses. |
| I32 awcFtMaxNumEntries | 1.3.6.1.4.1.522.3.12.2.1 | Integer32 | read-write | The maximum number of entries in the forwarding table. Must be a power of 2 from 1024 to 65536. The number of entries controls the size of the forwarding table and the hash algorithm used by the forwarding table. Changing the number of entries requires a system reboot. |
| I32 awcFtMcastAddr | 1.3.6.1.4.1.522.3.12.1.1 | Integer32 | read-only | Count of multicast addresses observed by the system. |
| awcFtp | 1.3.6.1.4.1.522.3.4 | |||
| awcFtpGroup | 1.3.6.1.4.1.522.3.100.2.4 | Standard information to support configuration of the FTP protocol. | ||
| I32 awcFtRepeater | 1.3.6.1.4.1.522.3.12.1.11 | Integer32 | read-only | Count of Repeater addresses observed by the system. |
| I32 awcFtRepeaterSelf | 1.3.6.1.4.1.522.3.12.1.12 | Integer32 | read-only | Count of Repeater devices which are Associated to the system. |
| INT awcFtRogueApAlertTimeout | 1.3.6.1.4.1.522.3.12.2.13 | INTEGER | read-write | The minimum number of minutes after a Possible Rogue status is reported about a device before another Possible Rogue status report is issued by this system about the same device. |
| awcFtStatistics | 1.3.6.1.4.1.522.3.12.1 | |||
| U32 awcFtTimeoutSecAccessPoint | 1.3.6.1.4.1.522.3.12.2.9 | Unsigned32 | read-write | The default number of seconds an Entry with awcTpFdbClassID=accessPoint will remain in the Forwarding Table before being staled-out. |
| U32 awcFtTimeoutSecBridge | 1.3.6.1.4.1.522.3.12.2.7 | Unsigned32 | read-write | The default number of seconds an Entry with awcTpFdbClassID=bridge will remain in the Forwarding Table before being staled-out. |
| U32 awcFtTimeoutSecBridgeHost | 1.3.6.1.4.1.522.3.12.2.5 | Unsigned32 | read-write | The default number of seconds an Entry with awcTpFdbClassID=bridgeHost will remain in the Forwarding Table before being staled-out. |
| U32 awcFtTimeoutSecBridgeRoot | 1.3.6.1.4.1.522.3.12.2.10 | Unsigned32 | read-write | The default number of seconds an Entry with awcTpFdbClassID=bridgeRoot will remain in the Forwarding Table before being staled-out. |
| U32 awcFtTimeoutSecClientSTA | 1.3.6.1.4.1.522.3.12.2.6 | Unsigned32 | read-write | The default number of seconds an Entry with awcTpFdbClassID=clientStation will remain in the Forwarding Table before being staled-out. |
| U32 awcFtTimeoutSecDsHost | 1.3.6.1.4.1.522.3.12.2.4 | Unsigned32 | read-write | The default number of seconds an Entry with awcTpFdbClassID=dsHost will remain in the Forwarding Table before being staled-out. |
| U32 awcFtTimeoutSecMcastAddr | 1.3.6.1.4.1.522.3.12.2.3 | Unsigned32 | read-write | The default number of seconds an Entry with awcTpFdbClassID=multicast will remain in the Forwarding Table before being staled-out. |
| U32 awcFtTimeoutSecRepeater | 1.3.6.1.4.1.522.3.12.2.8 | Unsigned32 | read-write | The default number of seconds an Entry with awcTpFdbClassID=repeater will remain in the Forwarding Table before being staled-out. |
| U32 awcFtTimeoutSecUnknown | 1.3.6.1.4.1.522.3.12.2.2 | Unsigned32 | read-write | The default number of seconds an Entry with awcTpFdbClassID=unknown will remain in the Forwarding Table before being staled-out. |
| awcHotStandby | 1.3.6.1.4.1.522.3.18 | |||
| awcHotStandbyGroup | 1.3.6.1.4.1.522.3.100.2.18 | Standard information to support operation of an AP in the Hot Standby mode. | ||
| T/F awcHotStandbyInHotStandby | 1.3.6.1.4.1.522.3.18.4 | TruthValue | read-write | If true, the current unit is in its monitoring mode, i.e., if the unit is or will be a hot standby device. |
| MAC awcHotStandbyMACAddr | 1.3.6.1.4.1.522.3.18.1 | MacAddress | read-write | The MAC address of the target unit which is being monitored. |
| INT awcHotStandbyPollingFrequency | 1.3.6.1.4.1.522.3.18.2 | INTEGER | read-write | The frequency (in seconds) that the monitored target unit is being polled for testing its health. |
| INT awcHotStandbyPollingTimeOut | 1.3.6.1.4.1.522.3.18.3 | INTEGER | read-write | The total time (in seconds) that the monitoring unit can tolerate the failure at polling the monitored target unit. After this duration, one more failure of the polling will trigger the standby unit to take the role of monitored unit. |
| AWC awcHotStandbyState | 1.3.6.1.4.1.522.3.18.5 | AwcHotStandbyState | read-only | The current state, e.g., running, stopped, ... of the hotstandby. |
| AWC awcHotStandbyStatus | 1.3.6.1.4.1.522.3.18.6 | AwcHotStandbyStatus | read-only | The current stateus, e.g., error, OK, ... of the hotstandby. |
| awcHttpd | 1.3.6.1.4.1.522.3.8 | |||
| awcHttpdGroup | 1.3.6.1.4.1.522.3.100.2.8 | Standard information to support configuration of the Web Server. | ||
| INT awcHttpdPort | 1.3.6.1.4.1.522.3.8.6 | INTEGER | read-write | IP port number over which to perform HTTP operations. |
| IP awcIappMcastIpAddr | 1.3.6.1.4.1.522.3.17.1 | IpAddress | read-write | Multicast IP network address over which applicable packets of the DDP and IAPP protocols are exchanged between stations. Default 224.0.1.40. |
| INT awcIappPort | 1.3.6.1.4.1.522.3.17.2 | INTEGER | read-write | IP port identifier through which applicable packets of the DDP and IAPP protocols are exchanged between stations. Default 2887. |
| T/F awcIfAdoptPrimaryIdentity | 1.3.6.1.4.1.522.3.5.1.3 | TruthValue | read-write | If true, this interface adopts the identity of bootconfigDev, the primary interface. This includes MAC address, IP address, etc. This is the conventional mode of operation when operating as a transparent bridge. If false, this interface always has a unique MAC address. |
| IP awcIfDefaultIpAddress | 1.3.6.1.4.1.522.3.5.1.4 | IpAddress | read-write | The default IPv4 Address of the interface. If BOOTP or DHCP is enabled, this may be overridden by the BOOTP or DHCP server. |
| IP awcIfDefaultIpNetMask | 1.3.6.1.4.1.522.3.5.1.5 | IpAddress | read-write | The default IPv4 netmask of the interface. If BOOTP or DHCP is enabled, this may be overridden by the BOOTP or DHCP server. |
| MAC awcIfDefaultPhysAddress | 1.3.6.1.4.1.522.3.5.1.1 | MacAddress | read-only | The default, factory-assigned MAC address of the interface. Guaranteed to be unique across all IEEE 802 devices. |
| awcIfEntry | 1.3.6.1.4.1.522.3.5.1 | not-accessible | An entry in the awcIfEntry table. | |
| IP awcIfIpAddress | 1.3.6.1.4.1.522.3.5.1.6 | IpAddress | read-only | The IPv4 Address currently in use by the interface. |
| IP awcIfIpNetMask | 1.3.6.1.4.1.522.3.5.1.7 | IpAddress | read-only | The IPv4 netmask currently in use by the interface. |
| U32 awcIfMSDUMaxLength | 1.3.6.1.4.1.522.3.5.1.8 | Unsigned32 | read-only | Maximum length of the data portion of a packet for this particular interface. This is the maximum MAC Service Data Unit length, which is greater than or equal to ifMtu, depending on the configured MAC-level encapsulation. |
| C32 awcIfOutDiscardsCoS0 | 1.3.6.1.4.1.522.3.5.1.9 | Counter32 | read-only | The number of outbound packets of CoS 0 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. |
| C32 awcIfOutDiscardsCoS1 | 1.3.6.1.4.1.522.3.5.1.10 | Counter32 | read-only | The number of outbound packets of CoS 1 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. |
| C32 awcIfOutDiscardsCoS2 | 1.3.6.1.4.1.522.3.5.1.11 | Counter32 | read-only | The number of outbound packets of CoS 2 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. |
| C32 awcIfOutDiscardsCoS3 | 1.3.6.1.4.1.522.3.5.1.12 | Counter32 | read-only | The number of outbound packets of CoS 3 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. |
| C32 awcIfOutDiscardsCoS4 | 1.3.6.1.4.1.522.3.5.1.13 | Counter32 | read-only | The number of outbound packets of CoS 4 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. |
| C32 awcIfOutDiscardsCoS5 | 1.3.6.1.4.1.522.3.5.1.14 | Counter32 | read-only | The number of outbound packets of CoS 5 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. |
| C32 awcIfOutDiscardsCoS6 | 1.3.6.1.4.1.522.3.5.1.15 | Counter32 | read-only | The number of outbound packets of CoS 6 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. |
| C32 awcIfOutDiscardsCoS7 | 1.3.6.1.4.1.522.3.5.1.16 | Counter32 | read-only | The number of outbound packets of CoS 7 which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reason for discarding such a packet could be to free up buffer space. Another reason would be exceeding their maximum time-to-live. |
| MAC awcIfPhysAddress | 1.3.6.1.4.1.522.3.5.1.2 | MacAddress | read-write | The MAC address to be used by the interface. If awcIfDefaultPhysAddress is to be used, this is 00:00:00:00:00:00. |
| awcIfTable | 1.3.6.1.4.1.522.3.5 | not-accessible | IfTable attributes. In tabular form to allow for multiple instances on an agent. | |
| awcIfTableGroup | 1.3.6.1.4.1.522.3.100.2.5 | Standard information to support configuration of network interfaces. | ||
| T/F awcLocateUnit | 1.3.6.1.4.1.522.3.1.29 | TruthValue | read-write | If true, the unit will immediately begin flashing all three of its Status LEDs with an alternating pattern of amber and off. If false, the Status LEDs operate in their normal fashion. |
| T/F awcmipDebug | 1.3.6.1.4.1.522.3.22.6 | TruthValue | read-write | If true, the Access Point's proxy mobile IP debug information is printed on the console. If false, debug messages are not printed. |
| awcMobileIP | 1.3.6.1.4.1.522.3.22 | |||
| awcMobileIpGroup | 1.3.6.1.4.1.522.3.100.2.21 | Information to support configuration of proxy mobile IP on the AP. | ||
| STR awcOemHomeURL | 1.3.6.1.4.1.522.3.1.20 | DisplayString | read-only | The URL of the corporate HTML home page of the reseller for which this system is branded. |
| STR awcOemName | 1.3.6.1.4.1.522.3.1.18 | DisplayString | read-only | The full name of the reseller for which this system is branded. |
| STR awcOemNameShort | 1.3.6.1.4.1.522.3.1.19 | DisplayString | read-only | An abbreviated name of the reseller for which this system is branded. |
| MAC awcOemOUI | 1.3.6.1.4.1.522.3.1.17 | MacAddress | read-only | The IEEE Organizationally Unique Identifier of the reseller for which this system is branded. |
| INT awcP802dot1XVersion | 1.3.6.1.4.1.522.3.17.100 | INTEGER | read-write | Version of the 802.1X Protocol specification which the AP will apply for incoming and outgoing EAPOL traffic. Versions with 'd' designators are draft specifications. The 802.1x-2001 standard is the same as draft 10. |
| T/F awcPfEtAlert | 1.3.6.1.4.1.522.3.20.2.1.6 | TruthValue | read-create | Should an alert be registered when a packet of this Ethertype is observed? |
| AWC awcPfEtDefaultDisposition | 1.3.6.1.4.1.522.3.20.1.1.3 | AwcPfDisposition | read-create | Default packet disposition of the static Ethertype filters set. |
| U32 awcPfEtDefaultNUcastTimeToLive | 1.3.6.1.4.1.522.3.20.1.1.5 | Unsigned32 | read-create | Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults. |
| U32 awcPfEtDefaultUcastTimeToLive | 1.3.6.1.4.1.522.3.20.1.1.4 | Unsigned32 | read-create | Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults. |
| AWC awcPfEtDisposition | 1.3.6.1.4.1.522.3.20.2.1.2 | AwcPfDisposition | read-create | Designation of how the protocol should be handled. |
| INT awcPfEtEthertype | 1.3.6.1.4.1.522.3.20.2.1.1 | INTEGER | read-only | Ethertype (protocol) to which this individual static filter applies |
| U32 awcPfEtNUcastTimeToLive | 1.3.6.1.4.1.522.3.20.2.1.5 | Unsigned32 | read-create | Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults. |
| U32 awcPfEtSetId | 1.3.6.1.4.1.522.3.20.1.1.1 | Unsigned32 | read-only | Numeric identifier of the static Ethertype filters set. |
| STR awcPfEtSetName | 1.3.6.1.4.1.522.3.20.1.1.2 | DisplayString | read-create | Descriptive name of the static Ethertype filters set. Max. string length is 64 octets. |
| ROW awcPfEtSetStatus | 1.3.6.1.4.1.522.3.20.1.1.6 | RowStatus | read-create | Row status of the entire static Ethertype filters set. |
| ROW awcPfEtStatus | 1.3.6.1.4.1.522.3.20.2.1.7 | RowStatus | read-create | Row status of the individual static Ethertype filters. |
| U32 awcPfEtUcastTimeToLive | 1.3.6.1.4.1.522.3.20.2.1.4 | Unsigned32 | read-create | Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults. |
| AWC awcPfEtUserPriority | 1.3.6.1.4.1.522.3.20.2.1.3 | AwcPfPriority | read-create | Designation of the priority assigned to packets of the Ethertype. |
| T/F awcPfIppAlert | 1.3.6.1.4.1.522.3.20.4.1.6 | TruthValue | read-create | Should an alert be registered when a packet of this IP Protocol is observed? |
| AWC awcPfIppDefaultDisposition | 1.3.6.1.4.1.522.3.20.3.1.3 | AwcPfDisposition | read-create | Default packet disposition of the static IP Protocol filters set. |
| U32 awcPfIppDefaultNUcastTimeToLive | 1.3.6.1.4.1.522.3.20.3.1.5 | Unsigned32 | read-create | Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults. |
| U32 awcPfIppDefaultUcastTimeToLive | 1.3.6.1.4.1.522.3.20.3.1.4 | Unsigned32 | read-create | Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults. |
| AWC awcPfIppDisposition | 1.3.6.1.4.1.522.3.20.4.1.2 | AwcPfDisposition | read-create | Designation of how the protocol should be handled. |
| INT awcPfIppIpProtocol | 1.3.6.1.4.1.522.3.20.4.1.1 | INTEGER | read-only | IP Protocol to which this individual static filter applies |
| U32 awcPfIppNUcastTimeToLive | 1.3.6.1.4.1.522.3.20.4.1.5 | Unsigned32 | read-create | Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults. |
| U32 awcPfIppSetId | 1.3.6.1.4.1.522.3.20.3.1.1 | Unsigned32 | read-only | Numeric identifier of the static IP Protocol filters set. |
| STR awcPfIppSetName | 1.3.6.1.4.1.522.3.20.3.1.2 | DisplayString | read-create | Descriptive name of the static IP Protocol filters set. Max. string length is 64 octets. |
| ROW awcPfIppSetStatus | 1.3.6.1.4.1.522.3.20.3.1.6 | RowStatus | read-create | Row status of the entire static IP Protocol filters set. |
| ROW awcPfIppStatus | 1.3.6.1.4.1.522.3.20.4.1.7 | RowStatus | read-create | Row status of the individual static IP Protocol filters. |
| U32 awcPfIppUcastTimeToLive | 1.3.6.1.4.1.522.3.20.4.1.4 | Unsigned32 | read-create | Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults. |
| AWC awcPfIppUserPriority | 1.3.6.1.4.1.522.3.20.4.1.3 | AwcPfPriority | read-create | Designation of the priority assigned to packets of the IP Protocol. |
| T/F awcPfIptAlert | 1.3.6.1.4.1.522.3.20.6.1.6 | TruthValue | read-create | Should an alert be registered when a packet of this IP Port is observed? |
| AWC awcPfIptDefaultDisposition | 1.3.6.1.4.1.522.3.20.5.1.3 | AwcPfDisposition | read-create | Default packet disposition of the static IP Port filters set. |
| U32 awcPfIptDefaultNUcastTimeToLive | 1.3.6.1.4.1.522.3.20.5.1.5 | Unsigned32 | read-create | Default time-to-live for non-unicast (multicast) packets. A value of 0 means to use the system defaults. |
| U32 awcPfIptDefaultUcastTimeToLive | 1.3.6.1.4.1.522.3.20.5.1.4 | Unsigned32 | read-create | Default time-to-live for unicast (directed) packets. A value of 0 means to use the system defaults. |
| AWC awcPfIptDisposition | 1.3.6.1.4.1.522.3.20.6.1.2 | AwcPfDisposition | read-create | Designation of how the Port should be handled. |
| INT awcPfIptIpPort | 1.3.6.1.4.1.522.3.20.6.1.1 | INTEGER | read-only | IP Port to which this individual static filter applies |
| U32 awcPfIptNUcastTimeToLive | 1.3.6.1.4.1.522.3.20.6.1.5 | Unsigned32 | read-create | Time-to-live for non-unicast (multicast) packets. A value of 0 means to use the Filter Set defaults. |
| U32 awcPfIptSetId | 1.3.6.1.4.1.522.3.20.5.1.1 | Unsigned32 | read-only | Numeric identifier of the static IP Port filters set. |
| STR awcPfIptSetName | 1.3.6.1.4.1.522.3.20.5.1.2 | DisplayString | read-create | Descriptive name of the static IP Port filters set. Max. string length is 64 octets. |
| ROW awcPfIptSetStatus | 1.3.6.1.4.1.522.3.20.5.1.6 | RowStatus | read-create | Row status of the entire static IP Port filters set. |
| ROW awcPfIptStatus | 1.3.6.1.4.1.522.3.20.6.1.7 | RowStatus | read-create | Row status of the individual static IP Port filters. |
| U32 awcPfIptUcastTimeToLive | 1.3.6.1.4.1.522.3.20.6.1.4 | Unsigned32 | read-create | Time-to-live for unicast (directed) packets. A value of 0 means to use the Filter Set defaults. |
| AWC awcPfIptUserPriority | 1.3.6.1.4.1.522.3.20.6.1.3 | AwcPfPriority | read-create | Designation of the priority assigned to packets of the IP Port. |
| awcPolGrpEntry | 1.3.6.1.4.1.522.3.16.1.1 | not-accessible | An entry in awcPolGrpTable. | |
| U32 awcPolGrpId | 1.3.6.1.4.1.522.3.16.1.1.1 | Unsigned32 | not-accessible | Numeric identifier of the Policy Group. |
| U32 awcPolGrpInEthertypeFilterId | 1.3.6.1.4.1.522.3.16.1.1.4 | Unsigned32 | read-create | awcPfEtSetId of the Ethertype Filter Set to apply to packets received subject to this policy. If 0, no filters are applied. |
| U32 awcPolGrpInIpPortFilterId | 1.3.6.1.4.1.522.3.16.1.1.8 | Unsigned32 | read-create | awcPfIptSetId of the IP Port Filter Set to apply to packets received subject to this policy. If 0, no filters are applied. |
| U32 awcPolGrpInIpProtoFilterId | 1.3.6.1.4.1.522.3.16.1.1.6 | Unsigned32 | read-create | awcPfIppSetId of the IP Protocol Filter Set to apply to packets received subject to this policy. If 0, no filters are applied. |
| STR awcPolGrpName | 1.3.6.1.4.1.522.3.16.1.1.2 | DisplayString | read-create | Descriptive name of the Policy Group. Max. string length is 64 octets. |
| U32 awcPolGrpOutEthertypeFilterId | 1.3.6.1.4.1.522.3.16.1.1.5 | Unsigned32 | read-create | awcPfEtSetId of the Ethertype Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied. |
| U32 awcPolGrpOutIpPortFilterId | 1.3.6.1.4.1.522.3.16.1.1.9 | Unsigned32 | read-create | awcPfIptSetId of the IP Port Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied. |
| U32 awcPolGrpOutIpProtoFilterId | 1.3.6.1.4.1.522.3.16.1.1.7 | Unsigned32 | read-create | awcPfIppSetId of the IP Protocol Filter Set to apply to packets transmitted subject to this policy. If 0, no filters are applied. |
| ROW awcPolGrpStatus | 1.3.6.1.4.1.522.3.16.1.1.3 | RowStatus | read-create | Row status of the entire Policy Group. |
| awcPolGrpTable | 1.3.6.1.4.1.522.3.16.1 | not-accessible | Table of named groups of related protocol filters | |
| awcPolicyGroups | 1.3.6.1.4.1.522.3.16 | |||
| awcPolicyGroupsGroup | 1.3.6.1.4.1.522.3.100.2.16 | Standard information to support operation of Policy Groups. | ||
| awcPrFltEthertypeEntry | 1.3.6.1.4.1.522.3.20.2.1 | not-accessible | An entry in the individual static Ethertype filter table. | |
| awcPrFltEthertypeSetEntry | 1.3.6.1.4.1.522.3.20.1.1 | not-accessible | An entry in awcPrFltEthertypeTable. | |
| awcPrFltEthertypeSetTable | 1.3.6.1.4.1.522.3.20.1 | not-accessible | Table of static Ethertype Filters | |
| awcPrFltEthertypeTable | 1.3.6.1.4.1.522.3.20.2 | not-accessible | Table of individual static Ethertype filters. | |
| awcPrFltIpPortEntry | 1.3.6.1.4.1.522.3.20.6.1 | not-accessible | An entry in the individual static IP Port filter table. | |
| awcPrFltIpPortSetEntry | 1.3.6.1.4.1.522.3.20.5.1 | not-accessible | An entry in awcPrFltIpPortTable. | |
| awcPrFltIpPortSetTable | 1.3.6.1.4.1.522.3.20.5 | not-accessible | Table of static IP Port Filters | |
| awcPrFltIpPortTable | 1.3.6.1.4.1.522.3.20.6 | not-accessible | Table of individual static IP Port filters. | |
| awcPrFltIpProtocolEntry | 1.3.6.1.4.1.522.3.20.4.1 | not-accessible | An entry in the individual static IP Protocol filter table. | |
| awcPrFltIpProtocolSetEntry | 1.3.6.1.4.1.522.3.20.3.1 | not-accessible | An entry in awcPrFltIpProtocolTable. | |
| awcPrFltIpProtocolSetTable | 1.3.6.1.4.1.522.3.20.3 | not-accessible | Table of static IP Protocol Filters | |
| awcPrFltIpProtocolTable | 1.3.6.1.4.1.522.3.20.4 | not-accessible | Table of individual static IP Protocol filters. | |
| STR awcprimAAP | 1.3.6.1.4.1.522.3.22.2 | DisplayString | read-write | The first AAP hostname or IP address from a list of 3 AAPs. |
| awcProtocolFilters | 1.3.6.1.4.1.522.3.20 | |||
| awcProtocolFiltersGroup | 1.3.6.1.4.1.522.3.100.2.20 | Standard information to support configuration of static protocol filters on the AP. | ||
| awcRipConfig | 1.3.6.1.4.1.522.3.13 | |||
| STR awcsec1AAP | 1.3.6.1.4.1.522.3.22.3 | DisplayString | read-write | The second AAP hostname or IP address from a list of 3 AAPs. |
| STR awcsec2AAP | 1.3.6.1.4.1.522.3.22.4 | DisplayString | read-write | The third AAP hostname or IP address from a list of 3 AAPs. |
| awcSerialConfigEntry | 1.3.6.1.4.1.522.3.3.1.1 | not-accessible | An entry in the awcSerialConfigEntry table. | |
| awcSerialConfigTable | 1.3.6.1.4.1.522.3.3.1 | not-accessible | SerialConfigTable attributes. In tabular form to allow for multiple instances on an agent. | |
| awcSerialDev | 1.3.6.1.4.1.522.3.3 | |||
| awcSerialDevGroup | 1.3.6.1.4.1.522.3.100.2.3 | Standard information to support configuration of serial ports. | ||
| awcSnmp | 1.3.6.1.4.1.522.3.10 | |||
| awcSnmpGroup | 1.3.6.1.4.1.522.3.100.2.10 | Standard information to support configuration of the SNMP protocol. | ||
| awcSntp | 1.3.6.1.4.1.522.3.11 | |||
| awcSntpGroup | 1.3.6.1.4.1.522.3.100.2.11 | Standard information to support configuration of the SNTP protocol. | ||
| awcSystem | 1.3.6.1.4.1.522.3.1 | |||
| awcSystemGroup | 1.3.6.1.4.1.522.3.100.2.1 | Standard information to support operation of an Aironet Access Point such as versions, system flags, and what features are enabled. | ||
| MAC awcTpFdbAddress | 1.3.6.1.4.1.522.3.12.3.1.1 | MacAddress | read-only | A MAC address for which the bridge has forwarding and/or filtering information. |
| MAC awcTpFdbAlertAddress | 1.3.6.1.4.1.522.3.12.7.1.1 | MacAddress | read-only | A MAC address for which the bridge has forwarding and/or filtering information. |
| awcTpFdbAlertEntry | 1.3.6.1.4.1.522.3.12.7.1 | not-accessible | Information about a specific MAC address for which the bridge has some forwarding and/or filtering information. | |
| C32 awcTpFdbAlertRcvdAlertTypeOctetsImmed | 1.3.6.1.4.1.522.3.12.7.1.9 | Counter32 | read-only | The total number of octets directed to this entry, over any interface, with a packet type designated Alert in an applicable protocol filter. |
| C32 awcTpFdbAlertRcvdAlertTypePktsImmed | 1.3.6.1.4.1.522.3.12.7.1.8 | Counter32 | read-only | The total number of packets directed to this entry, over any interface, with a packet type designated Alert in an applicable protocol filter. |
| C32 awcTpFdbAlertSentAlertTypeOctetsImmed | 1.3.6.1.4.1.522.3.12.7.1.7 | Counter32 | read-only | The total number of octets sent by this entry, over any interface, with a packet type designated Alert in an applicable protocol filter. |
| C32 awcTpFdbAlertSentAlertTypePktsImmed | 1.3.6.1.4.1.522.3.12.7.1.6 | Counter32 | read-only | The total number of packets sent by this entry, over any interface, with a packet type designated Alert in an applicable protocol filter. |
| awcTpFdbAlertTable | 1.3.6.1.4.1.522.3.12.7 | not-accessible | A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only packet-trace alert statistics. Each entry is indexed by a MAC address in the packet forwarding. Entries in this table cannot be created or deleted by the network management system. All entries are created or deleted by the agent. | |
| AWC awcTpFdbClassID | 1.3.6.1.4.1.522.3.12.3.1.2 | AwcTpFdbClassID | read-only | Observed general 802.11 classification of the entry. |
| MAC awcTpFdbDdpAddress | 1.3.6.1.4.1.522.3.12.4.1.1 | MacAddress | read-only | A MAC address for which the bridge has forwarding and/or filtering information. |
| INT awcTpFdbDdpDistFromDS | 1.3.6.1.4.1.522.3.12.4.1.12 | INTEGER | read-only | The Bridging Distance or Number of Hops between the entry and the backbone Distribution System (DS). If 0, the entry is directly connected to the DS. |
| awcTpFdbDdpEntry | 1.3.6.1.4.1.522.3.12.4.1 | not-accessible | Information about a specific MAC address for which the bridge has some forwarding and/or filtering information. | |
| INT awcTpFdbDdpLoad | 1.3.6.1.4.1.522.3.12.4.1.11 | INTEGER | read-only | An approximation of the percentage of offered vs. theoretically-available load on the host's radio interface. |
| U32 awcTpFdbDdpNumAnnounceSent | 1.3.6.1.4.1.522.3.12.4.1.9 | Unsigned32 | read-only | The number of times the entry itself believes that it has issued some form of Aironet DDP Presense Announcement. If this field decreases, the entry has probably been reset. |
| INT awcTpFdbDdpNumAssociated | 1.3.6.1.4.1.522.3.12.4.1.10 | INTEGER | read-only | The number of Stations currently Associated with the entry. |
| AWC awcTpFdbDdpProdDevID | 1.3.6.1.4.1.522.3.12.4.1.3 | AwcDdpProdDevID | read-only | The Aironet DDP Product Device ID of the entry. |
| AWC awcTpFdbDdpRadioDevID | 1.3.6.1.4.1.522.3.12.4.1.4 | AwcDdpRadioDevID | read-only | The Aironet DDP Radio Device ID of the entry. |
| INT awcTpFdbDdpSwVerBeta | 1.3.6.1.4.1.522.3.12.4.1.7 | INTEGER | read-only | The Aironet DDP Beta Software Version Number of the entry. This number is always 0 for officially-released software. |
| INT awcTpFdbDdpSwVerMajor | 1.3.6.1.4.1.522.3.12.4.1.5 | INTEGER | read-only | The Aironet DDP Major Software Version Number of the entry. If unknown, the value 0 is returned. |
| INT awcTpFdbDdpSwVerMinor | 1.3.6.1.4.1.522.3.12.4.1.6 | INTEGER | read-only | The Aironet DDP Minor Software Version Number of the entry. |
| STR awcTpFdbDdpSysName | 1.3.6.1.4.1.522.3.12.4.1.2 | DisplayString | read-only | The Aironet DDP System Name of the entry. |
| awcTpFdbDdpTable | 1.3.6.1.4.1.522.3.12.4 | not-accessible | A table that contains information about entries for which the bridge has forwarding and/or filtering information. This table maintains only Aironet-specific information about each entry. | |
| U32 awcTpFdbDdpUptime | 1.3.6.1.4.1.522.3.12.4.1.8 | Unsigned32 | read-only | The time in seconds that the entry has been operational. |
| C32 awcTpFdbDestErrorOctetsImmed | 1.3.6.1.4.1.522.3.12.3.1.10 | Counter32 | read-only | Number of observed error octets for which this entry was the destination. |
| C32 awcTpFdbDestErrorPktsImmed | 1.3.6.1.4.1.522.3.12.3.1.9 | Counter32 | read-only | Number of observed error packets for which this entry was the destination. This count includes awcTpFdbDestMaxRetryErrorsImmed. |
| C32 awcTpFdbDestMaxRetryErrorsImmed | 1.3.6.1.4.1.522.3.12.3.1.11 | Counter32 | read-only | Number of observed max-retry error packets for which this entry was the destination. |
| C32 awcTpFdbDestOctetsImmed | 1.3.6.1.4.1.522.3.12.3.1.8 | Counter32 | read-only | Number of observed octets for which this entry was the destination. |
| C32 awcTpFdbDestPktsImmed | 1.3.6.1.4.1.522.3.12.3.1.7 | Counter32 | read-only | Number of observed packets for which this entry was the destination. |
| awcTpFdbEntry | 1.3.6.1.4.1.522.3.12.3.1 | not-accessible | Information about a specific MAC address for which the bridge has some forwarding and/or filtering information. | |
| C32 awcTpFdbFromAlertSrcOctetsImmed | 1.3.6.1.4.1.522.3.12.7.1.3 | Counter32 | read-only | The total number of octets directed to this entry, over any interface, from a source host designated Alert From in the forwarding table. |
| C32 awcTpFdbFromAlertSrcPktsImmed | 1.3.6.1.4.1.522.3.12.7.1.2 | Counter32 | read-only | The total number of packets directed to this entry, over any interface, from a source host designated Alert From in the forwarding table. |
| IP awcTpFdbIPv4Addr | 1.3.6.1.4.1.522.3.12.3.1.16 | IpAddress | read-only | Observed IPv4 network address of the entry. |
| C32 awcTpFdbSrcErrorOctetsImmed | 1.3.6.1.4.1.522.3.12.3.1.6 | Counter32 | read-only | Number of observed error octets for which this entry was the source. |
| C32 awcTpFdbSrcErrorPktsImmed | 1.3.6.1.4.1.522.3.12.3.1.5 | Counter32 | read-only | Number of observed error packets for which this entry was the source. |
| C32 awcTpFdbSrcOctetsImmed | 1.3.6.1.4.1.522.3.12.3.1.4 | Counter32 | read-only | Number of observed octets for which this entry was the source. |
| C32 awcTpFdbSrcPktsImmed | 1.3.6.1.4.1.522.3.12.3.1.3 | Counter32 | read-only | Number of observed packets for which this entry was the source. |
| awcTpFdbTable | 1.3.6.1.4.1.522.3.12.3 | not-accessible | A table that contains information about entries for which the bridge has forwarding and/or filtering information. This information is used by the transparent bridging function for maintaining statistics about each entry. | |
| C32 awcTpFdbToAlertDestOctetsImmed | 1.3.6.1.4.1.522.3.12.7.1.5 | Counter32 | read-only | The total number of packets sent by this entry, over any interface, to a destination MAC address designated Alert To in the forwarding table. |
| C32 awcTpFdbToAlertDestPktsImmed | 1.3.6.1.4.1.522.3.12.7.1.4 | Counter32 | read-only | The total number of packets sent by this entry, over any interface, to a destination MAC address designated Alert To in the forwarding table. |
| NTF awcTrapLog | 1.3.6.1.4.1.522.4 | SNMP trap corresponding to an event with a Severity Level requiring Notify Disposition while awcEventAlertSNMP is true. | ||
| awcTrapLogGroup | 1.3.6.1.4.1.522.3.100.2.100 | SNMP trap corresponding to an event with a Severity Level requiring Notify Disposition while awcEventAlertSNMP is true. | ||
| awcUserMgr | 1.3.6.1.4.1.522.3.7 | |||
| awcUserMgrGroup | 1.3.6.1.4.1.522.3.100.2.7 | Standard information to support configuration of the User Manager. | ||
| awcVx | 1.3.6.1.4.1.522.3 | The MIB module for Aironet entities. iso(1).org(3).dod(6).internet(1).private(4). enterprises(1).aironet(522).awcVx(3). This MIB provides network management support for Cisco IEEE 802.11 Wireless LAN type devices such as Access Point and Wireless Access Bridge. | ||
| awcVxCompliance | 1.3.6.1.4.1.522.3.100.1.1 | The compliance statement for the awcVx group. | ||
| awcVxCompliances | 1.3.6.1.4.1.522.3.100.1 | |||
| awcVxConformance | 1.3.6.1.4.1.522.3.100 | |||
| awcVxGroups | 1.3.6.1.4.1.522.3.100.2 | |||
| STR awcVxVersion | 1.3.6.1.4.1.522.3.1.3 | DisplayString | read-only | The version of the Access Point system code. |
| STR bootblockVersion | 1.3.6.1.4.1.522.3.1.25 | DisplayString | read-only | The version of the Access Point boot block (bootstrap loader) code. |
| U32 bootconfigBootCount | 1.3.6.1.4.1.522.3.2.27 | Unsigned32 | read-only | The number of times the system code has been restarted since the system left Cisco manufacturing. |
| STR bootconfigBootFile | 1.3.6.1.4.1.522.3.2.10 | DisplayString | read-only | Name of the default boot configuration file, specified by the BOOTP or DHCP server, containing the system configuration to be utilized by this device. This is considered a default configuration file because many DHCP servers are not capable of distinguishing boot files between different clients. |
| INT bootconfigBootProtocol | 1.3.6.1.4.1.522.3.2.1 | INTEGER | read-write | The protocol to be used for automatic configuration at the time of system bootstrap/reboot. Options BOOTP, DHCP, or none. |
| IP bootconfigClientAddr | 1.3.6.1.4.1.522.3.2.8 | IpAddress | read-only | IPv4 network address of this device, as determined by the BOOTP or DHCP protocol. |
| STR bootconfigClientName | 1.3.6.1.4.1.522.3.2.14 | DisplayString | read-only | Textual name of this device, as determined by the BOOTP or DHCP protocol. This should be a DNS-recognizable host name. |
| AWC bootconfigCmdInvokeIniLoad | 1.3.6.1.4.1.522.3.2.19 | AwcInvokeCommand | read-write | Initiate loading of an initialization script '.ini' file from the file server into the system FLASH. Commands recognized: start. |
| I32 bootconfigCmdStatusIniLoad | 1.3.6.1.4.1.522.3.2.20 | Integer32 | read-only | Status of the most recent command to load an initialization script '.ini' file. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = The '.ini' file was not found on the file server. 12 = Insufficient memory to load the '.ini' file. 22 = Invalid '.ini' file format. 35 = File format of the '.ini' file is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled. |
| STR bootconfigDev | 1.3.6.1.4.1.522.3.2.7 | DisplayString | read-write | Text string identifying the network device used for bootstrapping the system via BOOTP or DHCP. This is only applicable in BOOTP mode or when the system is configured as a router, when not all the network interfaces share the same ifPhysAddress. |
| STR bootconfigDhcpClassID | 1.3.6.1.4.1.522.3.2.24 | DisplayString | read-write | Specification of the DHCP Class Identifier presented by the system when requesting DHCP leases. |
| INT bootconfigDhcpClientIdType | 1.3.6.1.4.1.522.3.2.28 | INTEGER | read-write | The ARP hardware type, per RFC 1700, of bootconfigDhcpClientIdValue. If it is not a hardware address (e.g. is a fully-qualified domain name), a value of 0 will be used for the DHCP Client Identifier 'htype' field. |
| STR bootconfigDhcpClientIdValue | 1.3.6.1.4.1.522.3.2.29 | DisplayString | read-write | Specification of the DHCP unique client Identifier presented by the system when requesting DHCP leases. |
| STR bootconfigDomainName | 1.3.6.1.4.1.522.3.2.16 | DisplayString | read-only | Name of the IP domain of which this device is a member, as determined by the BOOTP or DHCP protocol. |
| IP bootconfigFileServerAddr | 1.3.6.1.4.1.522.3.2.25 | IpAddress | read-only | IPv4 network address of the file server from which to read configuration files, as determined by the BOOTP or DHCP protocol. |
| IP bootconfigGateway | 1.3.6.1.4.1.522.3.2.12 | IpAddress | read-only | IPv4 network address of the default network gateway to be used by this device, as determined by the BOOTP or DHCP protocol. |
| IP bootconfigHostAddr | 1.3.6.1.4.1.522.3.2.9 | IpAddress | read-only | IPv4 network address of the BOOTP or DHCP server from which the configuration of this device was leased. |
| STR bootconfigHostName | 1.3.6.1.4.1.522.3.2.13 | DisplayString | read-only | Textual name of the BOOTP or DHCP server from which the configuration of this device was leased. This should be a DNS-recognizable host name. |
| IP bootconfigLogServerAddr | 1.3.6.1.4.1.522.3.2.26 | IpAddress | read-only | IPv4 network address of the host to receive SYSLOG messages, as determined by the BOOTP or DHCP protocol. |
| U32 bootconfigMinLeaseDuration | 1.3.6.1.4.1.522.3.2.6 | Unsigned32 | read-write | The minimum acceptable DHCP lease duration, in minutes. |
| U32 bootconfigMultOfferTimeout | 1.3.6.1.4.1.522.3.2.4 | Unsigned32 | read-write | The time, in seconds, which the system should wait for a better offer configuration response from a DHCP or BOOTP server before choosing the best current offer. |
| IP bootconfigNameServer | 1.3.6.1.4.1.522.3.2.15.1.2 | IpAddress | read-only | The IPv4 address of a domain name server. |
| bootconfigNameServerEntry | 1.3.6.1.4.1.522.3.2.15.1 | not-accessible | An entry in bootconfigNameServerTable. | |
| INT bootconfigNameServerPriority | 1.3.6.1.4.1.522.3.2.15.1.1 | INTEGER | read-only | The priority order in which a domain name server is queried. Lower values are queried first. |
| bootconfigNameServerTable | 1.3.6.1.4.1.522.3.2.15 | not-accessible | Table of DNS Name Servers provided by the bootconfigHostAddr Boot Server. | |
| INT bootconfigReadINI | 1.3.6.1.4.1.522.3.2.2 | INTEGER | read-write | If always, the system will attempt to read a .ini-formatted configuration file upon every reboot. If never, the system will not attempt to read a .ini file upon reboot, even if a boot protocol is in use and the boot server specifies a file to be read. If ifSpecified, the system will attempt to read a .ini file upon reboot if and only if a boot protocol is in use and the boot server explicitly specifies a file to be read. The system attempts several filenames in the process of retrieving a .ini file without error. In order, these filenames are based on the system's BOOTP- or DHCP-assigned client name, then the MIB2 sysName, then the system's IP address, then, as a last resort, the BOOTP- or DHCP-assigned boot file name. For each filename, the system attempts to read first from the designated defaultFileServer, then, if not successful, from one of either the BOOTP/DHCP server itself or bootconfigFileServerAddr (if specified by the BOOTP/DHCP server). |
| U32 bootconfigReqLeaseDuration | 1.3.6.1.4.1.522.3.2.5 | Unsigned32 | read-write | The requested DHCP lease duration, in minutes. |
| T/F bootconfigSaveServerResponse | 1.3.6.1.4.1.522.3.2.18 | TruthValue | read-write | If true, the leased configuration from a boot server is saved as the new system defaults. If false, system defaults remain unchanged when a new configuration is leased. |
| U32 bootconfigServerConfigTimeout | 1.3.6.1.4.1.522.3.2.3 | Unsigned32 | read-write | The time in seconds which the system should wait for a configuration response from a BOOTP server before falling back to the stored configuration. |
| IP bootconfigSntpServer | 1.3.6.1.4.1.522.3.2.17 | IpAddress | read-only | IPv4 network address of SNTP server for use by this device, as determined by the BOOTP or DHCP protocol. |
| IP bootconfigSubnetMask | 1.3.6.1.4.1.522.3.2.11 | IpAddress | read-only | IPv4 network subnet mask to be used by this device, as determined by the BOOTP or DHCP protocol. |
| bootconfigVx | 1.3.6.1.4.1.522.3.2 | |||
| bootconfigVxGroup | 1.3.6.1.4.1.522.3.100.2.2 | Standard information to support operation of the boot server. | ||
| AWC cmdInvokeGetWebUI | 1.3.6.1.4.1.522.3.8.4 | AwcInvokeCommand | read-write | Initiate loading of the getWebUI file. Commands recognized: start. |
| I32 cmdStatusGetWebUI | 1.3.6.1.4.1.522.3.8.5 | Integer32 | read-only | Status of the most recent command to load the auxilliary web User Interface pages. Possible values: 0 = Operation completed successfully (or has not taken place). 2 = File not found on the file server. 12 = Insufficient memory to load all files. 20 = Identifier encountered while decoding is an ordinary file, not a directory. 22 = No file specified, or invalid file format. 35 = File format is not supported. 68 = Operation is still in progress. Poll again later. 72 = Operation was started, but later was canceled. |
| STR creationDate | 1.3.6.1.4.1.522.3.1.2 | DisplayString | read-only | The date and time the Access Point system code was initially compiled. |
| STR defaultFileServer | 1.3.6.1.4.1.522.3.4.1 | DisplayString | read-write | The name of the preferred file server to be used for all FTP and TFTP Put and Get operations. Max. name length is 128 octets. |
| STR defaultHelpRoot | 1.3.6.1.4.1.522.3.8.2 | DisplayString | read-write | URL identifying the directory in which help pages for the system are located. This URL is prefixed to all help page links. Max. string length is 128 octets. |
| STR defaultResolverDomain | 1.3.6.1.4.1.522.3.9.4 | DisplayString | read-write | The name of the resolver domain to be used by the system unless overridden by a BOOTP or DHCP server. Max. string length of 128 octets. |
| STR defaultResolverDomainServer | 1.3.6.1.4.1.522.3.9.5.1.2 | DisplayString | read-write | The IP Address of a domain name server to be used by the system unless overridden by a BOOTP or DHCP server. |
| defaultResolverDomainServerEntry | 1.3.6.1.4.1.522.3.9.5.1 | not-accessible | An entry in defaultResolverDomainServerTable. | |
| INT defaultResolverDomainServerPriority | 1.3.6.1.4.1.522.3.9.5.1.1 | INTEGER | read-only | The priority order in which a domain name server is queried. |
| defaultResolverDomainServerTable | 1.3.6.1.4.1.522.3.9.5 | not-accessible | Table of DNS Name Servers to be used by the system unless overridden by a BOOTP or DHCP server. | |
| STR defaultSntpServer | 1.3.6.1.4.1.522.3.11.1 | DisplayString | read-write | The name of the SNTP server to be use by the system, unless overridden by a BOOTP or DHCP server. Max. string length is 128 octets. |
| STR defaultWebRoot | 1.3.6.1.4.1.522.3.8.1 | DisplayString | read-write | File directory which contains the system's web site root file index.shm. Max. string length is 128 octets. |
| T/F enableDnsResolver | 1.3.6.1.4.1.522.3.1.11 | TruthValue | read-write | If true, the Access Point will attempt to resolve IP address references through all configured DNS servers and will attempt to perform reverse-lookup via all configured DNS servers when displaying IP addresses. If false, the Access Point will interpret and display only explicit numeric IP addresses. |
| T/F enableHTTP | 1.3.6.1.4.1.522.3.1.8 | TruthValue | read-write | If true, the Access Point's HTTP server can accept connections from other network devices. If false, the Access Point's HTTP server will only accept connections from the Access Point's console or indirectly over TELNET. |
| T/F enableMobileIP | 1.3.6.1.4.1.522.3.22.1 | TruthValue | read-write | If true, the Access Point's proxy mobile IP service is enabled. If false, proxy mobile IP service is disabled. |
| T/F enablePSPF | 1.3.6.1.4.1.522.3.1.21 | TruthValue | read-write | If true, Publicly-Secure Packet Forwarding mode is enabled (i.e. clients can not communicate with each other). If false, normal packet forwarding is used. |
| T/F enableRebootKey | 1.3.6.1.4.1.522.3.1.28 | TruthValue | read-write | If true, the VxWorks Monitor Trap keystroke is enabled from the console and from Telnet. By default, this is . Entering this character initiates a warm-restart of the system. If false, the VxWorks Monitor Trap keystroke is disabled. |
| T/F enableSNMP | 1.3.6.1.4.1.522.3.1.10 | TruthValue | read-write | If true, the Access Point's SNMP agent can accept connections from other network devices. If false, all SNMP connections will be refused. Note that this can only be set to false by an SNMP management station. If false, it can only be set to true by non-SNMP means. |
| T/F enableSNTP | 1.3.6.1.4.1.522.3.1.13 | TruthValue | read-write | If true, the Access Point will attempt to periodically update its wall-clock time via a configured SNTP server. If false, the Access Point wall-clock time must be manually adjusted. |
| T/F enableSTP | 1.3.6.1.4.1.522.3.1.27 | TruthValue | read-write | If true and the system is licensed with Bridge capabilities, the IEEE 802.1D Spanning Tree Protocol will be be used to control packet forwarding on all network interfaces. If false or the system is not licensed with Bridge capabilities, the system will use Access Point heuristics to control packet forwarding on all network interfaces. |
| T/F enableTelnet | 1.3.6.1.4.1.522.3.1.9 | TruthValue | read-write | If true, the Access Point's TELNET server can accept connections from other network devices. If false, all TELNET connections will be refused. |
| T/F enableUserMgr | 1.3.6.1.4.1.522.3.7.2 | TruthValue | read-write | If true, the User Manager subsystem is active. Web page, console, and SNMP access is restricted in accordance with userMgrCapabilities. If false, all users have full access to the system. |
| T/F enableWDB | 1.3.6.1.4.1.522.3.1.14 | TruthValue | read-write | If true, the Access Point will enable use of the VxWorks WDB debugger upon its next reboot. If false, no WDB debugging services will be available after the next reboot. The value of enableWDB is applicable only to special diagnostic versions of the Access Point system code. |
| STR getWebUI | 1.3.6.1.4.1.522.3.8.3 | DisplayString | read-write | The name of an auxilliary set of HTML user interface files to be loaded at system boot time from defaultFileServer. Archive formats accepted include .tar and .tar.gz. Max. string length is 128 octets. |
| STR languageCode | 1.3.6.1.4.1.522.3.1.5 | DisplayString | read-write | The language currently in use by the system. Max. string length is 128 octets. |
| mipSAEntry | 1.3.6.1.4.1.522.3.22.5.1 | not-accessible | An entry of SA bindings for a range of IP Addresses. | |
| STR mipSAGroupKey | 1.3.6.1.4.1.522.3.22.5.1.4 | DisplayString | read-create | Group Key for the range of IP Address in the Local SA binding |
| STR mipSAGroupSPI | 1.3.6.1.4.1.522.3.22.5.1.3 | DisplayString | read-create | Group SPI for the range of IP Address in the Local SA binding |
| IP mipSAIpEnd | 1.3.6.1.4.1.522.3.22.5.1.2 | IpAddress | read-create | Ending IP Address of the range for the SA binding. |
| IP mipSAIpStart | 1.3.6.1.4.1.522.3.22.5.1.1 | IpAddress | not-accessible | Starting IP Address of a range for the SA binding. |
| ROW mipSAStatus | 1.3.6.1.4.1.522.3.22.5.1.5 | RowStatus | read-create | Row status of the pMIP SA. Allows deletion via SNMP. |
| mipSATable | 1.3.6.1.4.1.522.3.22.5 | not-accessible | This entity's Mobile IP Local SA Bindings table. | |
| U32 motherboardRevision | 1.3.6.1.4.1.522.3.1.26 | Unsigned32 | read-only | Revision number of the Access Point system motherboard. |
| U32 pingTxLen | 1.3.6.1.4.1.522.3.1.15 | Unsigned32 | read-write | The size in octets of ping packets transmitted by the Access Point. Default 64. |
| T/F protectLegalPage | 1.3.6.1.4.1.522.3.7.4 | TruthValue | read-write | Should the legal credits page be protected or not. |
| STR resolverDomain | 1.3.6.1.4.1.522.3.9.1 | DisplayString | read-only | The name of the resolver domain currently in use by the system. Max. string length of 128 octets. |
| STR resolverDomainServer | 1.3.6.1.4.1.522.3.9.3.1.2 | DisplayString | read-only | The IP Address of a domain name server currently in use by the system. |
| resolverDomainServerEntry | 1.3.6.1.4.1.522.3.9.3.1 | not-accessible | An entry in resolverDomainServerTable. | |
| INT resolverDomainServerPriority | 1.3.6.1.4.1.522.3.9.3.1.1 | INTEGER | read-only | The priority order in which a domain name server is queried. |
| resolverDomainServerTable | 1.3.6.1.4.1.522.3.9.3 | not-accessible | Table of DNS Name Servers currently in use by the system. | |
| STR resolverDomainSuffix | 1.3.6.1.4.1.522.3.9.2 | DisplayString | read-write | The suffix name of the resolver domain. Used to abbreviate displayed host names. Max. string length is 128 octets. |
| INT serialAdminStatus | 1.3.6.1.4.1.522.3.3.1.1.2 | INTEGER | read-write | The requested status of the serial port. |
| U32 serialBaud | 1.3.6.1.4.1.522.3.3.1.1.4 | Unsigned32 | read-write | The baud rate of the serial port. |
| U32 serialDataBits | 1.3.6.1.4.1.522.3.3.1.1.6 | Unsigned32 | read-write | The number of data bits per character recognized by the serial port. |
| I32 serialDevFd | 1.3.6.1.4.1.522.3.3.1.1.12 | Integer32 | read-only | The VxWorks I/O File Descriptor used to access the serial device. |
| I32 serialDevIndex | 1.3.6.1.4.1.522.3.3.1.1.1 | Integer32 | read-only | The index used to access rows in the awcSerialConfig table. |
| INT serialFlowControl | 1.3.6.1.4.1.522.3.3.1.1.8 | INTEGER | read-write | The flow control method used by the serial port. |
| INT serialOperStatus | 1.3.6.1.4.1.522.3.3.1.1.3 | INTEGER | read-only | The actual status of the serial port. |
| INT serialParity | 1.3.6.1.4.1.522.3.3.1.1.5 | INTEGER | read-write | The parity of the serial port. |
| U32 serialStopBits | 1.3.6.1.4.1.522.3.3.1.1.7 | Unsigned32 | read-write | The number of stop bits of the serial port. |
| U32 serialTerminalColumns | 1.3.6.1.4.1.522.3.3.1.1.11 | Unsigned32 | read-write | The number of vertical columns available on each terminal page. Default 80. |
| U32 serialTerminalLines | 1.3.6.1.4.1.522.3.3.1.1.10 | Unsigned32 | read-write | The number of horizontal lines available on each terminal page. Default 24. |
| INT serialTerminalType | 1.3.6.1.4.1.522.3.3.1.1.9 | INTEGER | read-write | The terminal type of the serial port. |
| STR snmpTrapCommunity | 1.3.6.1.4.1.522.3.10.2 | DisplayString | read-write | The community name of the trap. Max. string length is 128 octets. |
| STR snmpTrapDest | 1.3.6.1.4.1.522.3.10.1 | DisplayString | read-write | The destination of an SNMP trap. This may be any DNS-recognizable IP address. Max. string length is 128 octets. |
| STR sntpServer | 1.3.6.1.4.1.522.3.11.2 | DisplayString | read-only | The name of the SNTP server currently in use by the system. Max. string length is 128 octets. |
| T/F sysExceptionReboot | 1.3.6.1.4.1.522.3.1.24 | TruthValue | read-write | If true, all access violations or other general faults in any task will result in a reboot of the system. If false, such errors will not result in a reboot, and thus diagnostics can be performed on the system. |
| U32 sysFlags | 1.3.6.1.4.1.522.3.1.4 | Unsigned32 | read-write | The VxWorks sysFlags system-configuration flags in use by the Access Point system. Not used by system code with awcVxVersion from 10.00 to 11.06. |
| U32 userMgrCapabilities | 1.3.6.1.4.1.522.3.7.1.1.4 | Unsigned32 | read-create | Bitmask of the capabilities of the user. The value may be any combination (sum) of the following capability values: 0 = none 1 = Administrator 2 = Write 4 = Firmware Update 8 = Identity Update 16 = SNMP Community |
| userMgrConfigEntry | 1.3.6.1.4.1.522.3.7.1.1 | not-accessible | An entry in the user manager table. | |
| userMgrConfigTable | 1.3.6.1.4.1.522.3.7.1 | not-accessible | System User attributes. | |
| OCT userMgrPassword | 1.3.6.1.4.1.522.3.7.1.1.3 | OCTET STRING | read-create | The SHA-1 hashed password of the user in the user manager. When a plaintext password is written, it is automatically replaced by the SHA-1 Secure Hash of that plaintext, prefixed by a 4-octet magic cookie. Max. string length is 24 octets. |
| ROW userMgrStatus | 1.3.6.1.4.1.522.3.7.1.1.5 | RowStatus | read-create | Row status of the user. Allows deletion via SNMP. |
| U32 userMgrUserIndex | 1.3.6.1.4.1.522.3.7.1.1.1 | Unsigned32 | read-only | The index of the user. |
| STR userMgrUserName | 1.3.6.1.4.1.522.3.7.1.1.2 | DisplayString | read-create | The name of the user. This should be unique across all users. Max. string length is 32 octets. |
| STR vxWorksVersion | 1.3.6.1.4.1.522.3.1.1 | DisplayString | read-only | The version of the underlying VxWorks operating system. |
RFC description
Provides management and monitoring for Cisco Aironet IEEE 802.11 wireless LAN access points and bridges.
Start monitoring Cisco Aironet 802.11 wireless access points/bridges (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.