CISCO-ITP-DSMR-UCP-MIB

All MIBs › CISCO-ITP-DSMR-UCP-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2005-05-18

Category: Cisco Devices, SNA and Legacy Protocols, Telephony and VoIP

Description: Manages ITP DSMR UCP (Universal Computer Protocol) connections for SMS message routing.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-ITP-DSMR-UCP-MIB?

CISCO-ITP-DSMR-UCP-MIB manages Distributed Short Message Routing (DSMR) delivery sessions that use the Universal Computer Protocol (UCP) on Cisco's IP Transfer Point (ITP) telecom signaling platform. It exposes configuration profiles (session timers, send-window size, session-init timing) through cdsmrUcpProfileTable and operational session state through cdsmrUcpSessionTable, along with a notification for session-state transitions. This lets an administrator monitor the software/protocol-level health of SMS routing sessions -- for example whether a UCP session is up, its local port, and whether inactivity or response timers are close to expiring, which would indicate a stalled SMS delivery path. It relates to adjacent SMS transport concepts (SMPP, SMD-PP) named in the module's acronym list but has no formal dependency on another IETF MIB. It is deployed on Cisco ITP nodes acting as SMS/SS7 gateways in telecom signaling networks. Engineers can download the CISCO-ITP-DSMR-UCP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-ITP-DSMR-UCP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IP Transfer Point (ITP) SS7/SMS signaling gateways

Monitoring Examples

Polling cdsmrUcpSessionTable/cdsmrUcpSessionTableEntry reveals the state and cdsmrUcpSessionLocalPortNumber of each active UCP session; comparing this against cdsmrUcpProfileTable settings like cdsmrUcpProfileInactivityTimer and cdsmrUcpProfileResponseTimer helps an admin spot sessions that are timing out or stuck. cdsmrUcpSessionStateNotifEnabled controls whether session state-change traps fire, letting an NMS get alerted the moment a UCP SMS-routing session drops.

What Can Be Monitored

UCP session state
session local port number
inactivity/response timer settings
send window size
session-init timer
session state change notifications

Imported Objects

From CISCO-ITP-GSP-MIB

cgspCLLICode	OBJECT-TYPE
cgspEventSequenceNumber	OBJECT-TYPE
cgspInstNetwork	OBJECT-TYPE

From CISCO-ITP-MLR-MIB

CmlrName

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using cdsmrUcpDestSentRequests OID:

Select a Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cdsmrUcpDestSentRequests into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of SMS requests sent to destination. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline (in requests), since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoItpDsmrUcpMIB	1.3.6.1.4.1.9.9.1302			The MIB for providing information about Distributed Short Message Routing delivery using Universal Computer Protocol. Acronyms and Terms: DSMR Distributed Short Message Routing SMPP Short Message Peer-to-Peer (protocol) SMD-PP Short Message Delivery Point to Point. SMS Short Message Service UCP Universal Computer Protocol. WRR Weighted Round Robin. A variation of the round robin algorithm that uses server weights to allow uneven distribution of traffic among a set of available servers. ********************************************
ciscoItpDsmrUcpMIBNotifs	1.3.6.1.4.1.9.9.1302.0
NTF ciscoItpDsmrUcpSessionState	1.3.6.1.4.1.9.9.1302.0.1			This notification is generated whenever SMPP destination changes state. This notification provides information on the availablity of the destination to receive and process packets using the UCP protocol.
ciscoItpDsmrUcpMIBObjects	1.3.6.1.4.1.9.9.1302.1
cdsmrUcpScalars	1.3.6.1.4.1.9.9.1302.1.0
T/F cdsmrUcpSessionStateNotifEnabled	1.3.6.1.4.1.9.9.1302.1.0.1	TruthValue	read-write	A control to enable or disable notifications as follows: 'true' Indicates that the ciscoItpDsmrUcpSessionState notification should be generated.. 'false' Indicates that ciscoItpDsmrUcpSessionState notification generation is disabled.
cdsmrUcpProfileTable	1.3.6.1.4.1.9.9.1302.1.5		not-accessible	A table that is used to monitor specific information used to configure universal computer protocol profile. Entries are added to this table via cdsmrUcpProfileRowStatus in accordance with the RowStatus convention.
cdsmrUcpProfileTableEntry	1.3.6.1.4.1.9.9.1302.1.5.1		not-accessible	Each entry defines parameter that can be used to default values for sessions.
CML cdsmrUcpProfileName	1.3.6.1.4.1.9.9.1302.1.5.1.1	CmlrName	not-accessible	A name used to define a collection of parameters for short message peer-to-peer protocol.
CDS cdsmrUcpProfileInactivityTimer	1.3.6.1.4.1.9.9.1302.1.5.1.2	CdsmrUcpInactivityTimer	read-create	This object specifies the duration of the inactivity timer used by Universal Computer Protocol. It indicates the maximum time lapse allowed between transactions before destination is considered inactive.
CDS cdsmrUcpProfileResponseTimer	1.3.6.1.4.1.9.9.1302.1.5.1.3	CdsmrUcpResponseTimer	read-create	This object specifies the duration of the response timer used by Universal Computer Protocol. It indicates the amount of time to wait before retransmitting packet.
CDS cdsmrUcpProfileSendWindow	1.3.6.1.4.1.9.9.1302.1.5.1.7	CdsmrUcpSendWindow	read-create	This object specifies the Send Window size to be used by Universal Computer Protocol.
CDS cdsmrUcpProfileSessionInitTimer	1.3.6.1.4.1.9.9.1302.1.5.1.8	CdsmrUcpSessionInitTimer	read-create	This object specifies the duration of the session initiation timer used to create Short Message Peer-to-Peer session. It specifies the maximum amount of time to wait for the session Bind to be received.
ROW cdsmrUcpProfileRowStatus	1.3.6.1.4.1.9.9.1302.1.5.1.9	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cdsmrUcpProfileTable following the RowStatus textual convention.
cdsmrUcpSessionTable	1.3.6.1.4.1.9.9.1302.1.6		not-accessible	A table that is used to collection information on universal computer protocol sessions. Entries are added to this table via cdsmrUcpSessionRowStatus in accordance with the RowStatus convention.
cdsmrUcpSessionTableEntry	1.3.6.1.4.1.9.9.1302.1.6.1		not-accessible	Each entry defines parameter and state information on universal computer protocol sessions.
INE cdsmrUcpSessionLocalPortNumber	1.3.6.1.4.1.9.9.1302.1.6.1.1	InetPortNumber	not-accessible	Local port number used to establish Ucp Session.
IPt cdsmrUcpSessionLocalIpAddrType	1.3.6.1.4.1.9.9.1302.1.6.1.2	InetAddressType	read-create	This object contains the type of the local IP address used to create an session.
IP cdsmrUcpSessionLocalIpAddress	1.3.6.1.4.1.9.9.1302.1.6.1.3	InetAddress	read-create	This object contains the local IP address used to create the session with the partner of this session.
T/F cdsmrUcpSessionDynamicDest	1.3.6.1.4.1.9.9.1302.1.6.1.4	TruthValue	read-create	Indicates whether dynamic destinations are allowed as follows. 'true' - dynamic destination are allowed. 'false' - dynamic destinations are not allowed.
ROW cdsmrUcpSessionRowStatus	1.3.6.1.4.1.9.9.1302.1.6.1.5	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cdsmrUcpSessionTable following the RowStatus textual convention.
cdsmrUcpDestTable	1.3.6.1.4.1.9.9.1302.1.7		not-accessible	A table that is used to define a collection of information on used to universal computer protocol destinations. Entries are added to this table via cdsmrUcpDestRowStatus in accordance with the RowStatus convention.
cdsmrUcpDestTableEntry	1.3.6.1.4.1.9.9.1302.1.7.1		not-accessible	Each entry defines parameter and state information on short message peer-to-peer protocol destinations.
CML cdsmrUcpDestName	1.3.6.1.4.1.9.9.1302.1.7.1.1	CmlrName	not-accessible	A name used to uniquely identify a destination using short message peer-to-peer protocol.
CDS cdsmrUcpDestInactivityTimer	1.3.6.1.4.1.9.9.1302.1.7.1.2	CdsmrUcpInactivityTimer	read-create	This object defines the allowed values used to define inactivity timer used by Universal Computer Protocol. Indicates the maximum time lapse allowed between transactions before destination is considered inactive.
CDS cdsmrUcpDestResponseTimer	1.3.6.1.4.1.9.9.1302.1.7.1.3	CdsmrUcpResponseTimer	read-create	This object specifies the duration of the response timer used by Universal Computer Protocol. It indicates the amount of time to wait before retransmitting packet.
CDS cdsmrUcpDestSendWindow	1.3.6.1.4.1.9.9.1302.1.7.1.4	CdsmrUcpSendWindow	read-create	This object specifies the Send Window size to be used by Universal Computer Protocol.
CDS cdsmrUcpDestSessionInitTimer	1.3.6.1.4.1.9.9.1302.1.7.1.5	CdsmrUcpSessionInitTimer	read-create	This object specifies the duration of the session initiation timer used to create Short Message Peer-to-Peer session. It specifies the maximum amount of time to wait for the session Bind to be received.
INE cdsmrUcpDestRemotePortNumber	1.3.6.1.4.1.9.9.1302.1.7.1.6	InetPortNumber	read-create	Remote port number used to establish short message peer-to-peer protocol session.
IPt cdsmrUcpDestRemoteIpAddrType	1.3.6.1.4.1.9.9.1302.1.7.1.7	InetAddressType	read-create	This object contains the type of the remote IP address used to create an session.
IP cdsmrUcpDestRemoteIpAddress	1.3.6.1.4.1.9.9.1302.1.7.1.8	InetAddress	read-create	This object contains the remote IP address used to create the session.
CML cdsmrUcpDestProfileName	1.3.6.1.4.1.9.9.1302.1.7.1.9	CmlrName	read-create	Specifies Profile from cdsmrUcpProfileTable table to define common default parameters for session.
INT cdsmrUcpDestState	1.3.6.1.4.1.9.9.1302.1.7.1.10	INTEGER	read-only	Current state of destination. 'active' - Destination is available. 'inactive' - Destination is unvailable. 'open' - Device is listening on port for destination to establish connection.
C32 cdsmrUcpDestSentRequestsEx	1.3.6.1.4.1.9.9.1302.1.7.1.11	Counter32	read-only	Number of SMS requests sent to destination.
C32 cdsmrUcpDestRcvdRequests	1.3.6.1.4.1.9.9.1302.1.7.1.12	Counter32	read-only	Number of SMS requests received from destination.
C32 cdsmrUcpDestSentResponses	1.3.6.1.4.1.9.9.1302.1.7.1.13	Counter32	read-only	Number of SMS responses sent to destination.
C32 cdsmrUcpDestRcvdResponses	1.3.6.1.4.1.9.9.1302.1.7.1.14	Counter32	read-only	Number of SMS responses received from destination.
ROW cdsmrUcpDestRowStatus	1.3.6.1.4.1.9.9.1302.1.7.1.15	RowStatus	read-create	The object is used by a management station to create or delete the row entry in cdsmrUcpDestTable following the RowStatus textual convention.
ciscoItpDsmrUcpMIBConform	1.3.6.1.4.1.9.9.1302.2
ciscoItpDsmrUcpMIBCompliances	1.3.6.1.4.1.9.9.1302.2.1
ciscoItpDsmrUcpMIBCompliance	1.3.6.1.4.1.9.9.1302.2.1.1			The compliance statement for entities which implement the Cisco CISCO-ITP-MLR-MIB
ciscoItpDsmrUcpMIBGroups	1.3.6.1.4.1.9.9.1302.2.2
ciscoItpDsmrUcpGroup	1.3.6.1.4.1.9.9.1302.2.2.1			A collection of objects providing information used to configure UCP profile and notifications.
ciscoItpDsmrUcpNotificationsGroup	1.3.6.1.4.1.9.9.1302.2.2.2			DSMR Universal Computer Protocol notification objects.

RFC description

Monitors Distributed Short Message Routing (DSMR) delivery using Universal Computer Protocol (UCP) for SMS service management.

Start monitoring Cisco IP Transfer Point (ITP) SS7 signaling gateway (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-ITP-DSMR-UCP-MIB