CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB

All MIBs › CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2013-02-20

Category: Cisco Devices, Hardware and Environment, Web and Application Servers

Description: Manages resource limits (connections, bandwidth, memory) for Cisco Layer 4-7 service modules.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB?

CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB manages resource classes and configurable min/max limits for Cisco Layer 4-7 service modules (such as firewall, NAT, or load-balancing modules), covering resources like TCP/IP connections, MAC address tables, syslog buffers, ACL memory, and NAT translations. It belongs to Cisco's service-module/security-appliance technology area and exposes configuration data defining resource classes and per-resource-type min/max limits. It is used to monitor the software resource-utilization status of L4-L7 modules, letting an administrator compare configured crlResourceLimitMin/crlResourceLimitMax values against actual usage to catch resource exhaustion conditions -- for example a module approaching its maximum NAT translation or connection limit -- before they cause service degradation. It is designed to centralize resource-limit management in addition to, and independent of, resource information already exposed in other module-specific MIBs. It is typically deployed on Cisco service modules or appliances hosted in Catalyst chassis or standalone security appliances, and administrators typically begin with a CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB download to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Layer 4-7 service modules
Cisco security appliances hosting L4-7 modules

Monitoring Examples

An operator would poll ciscoL4L7ResourceClassTable/ciscoL4L7ResourceClassEntry to enumerate configured resource classes by crlResourceClassName, then check ciscoL4L7ResourceLimitTable/ciscoL4L7ResourceLimitEntry for crlResourceLimitType, crlResourceLimitMin, and crlResourceLimitMax on resources such as TCP/IP connections or NAT translations. Comparing current usage against crlResourceLimitMax for a given crlResourceLimitType would reveal whether the module is close to exhausting a critical resource like ACL memory or connection table space. Notifications from ciscoL4L7ResourceLimitNotifs would fire when a configured limit is breached.

What Can Be Monitored

resource class definitions
resource limit min/max thresholds
TCP/IP connection resource usage
NAT translation resource usage
resource limit breach notifications

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From ENTITY-MIB

entPhysicalIndex

OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Gauge32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
StorageType
TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using crlResourceLimitReqsDeniedCount OID:

Select a Cisco Layer 4-7 service modules / security appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type crlResourceLimitReqsDeniedCount into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object represents the number of resource requests that were denied when the configured resource limit is exceeded for the resource identified by 'ciscoResourceLimitType'. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoL4L7moduleResourceLimitMIB	1.3.6.1.4.1.9.9.480			The MIB module for managing resource classes and configuring limits(max/min) to different resources. The resource referenced in this MIB are in addition to resource information availale in other MIBs. This MIB is applicable to L4-L7 modules which supports managing resource limits using a centralized approach. The resources (but not limited to) configured are of following categories: - TCP/IP Connections - MAC Addresses - syslog buffer, ACL Memmory - NAT Translations etc ciscoL4L7ResourceClassTable is used for adding/deleting resource classes. Resource class is identified by a name to which limits of multiple resources can be configured. ciscoL4L7ResourceLimitTable is used for adding/deleting limits to resources in a resource class. This limit is either maximum value and/or minimal value. ciscoL4L7ResourceRateLimitTable is used for adding/deleting rate limits to resources in a resource class. Terminologies used: ARP - Address Resolution Protocol. ACL - Access Control List. NAT - Network Address Translation. NBAR - Network Based Application Recognition. BPDU - Bridge Protocol Data Unit.
ciscoL4L7ResourceLimitNotifs	1.3.6.1.4.1.9.9.480.0
NTF clrResourceLimitReached	1.3.6.1.4.1.9.9.480.0.1			This notification is generated when the configured resource limit value specified in 'crlResourceLimitMax' is reached for a particular resource. This resource is identified by 'crlResourceLimitType' in ciscoL4L7ResourceLimitTable. clrResourceLimitReached object is superseded by clrResourceLimitReachedNotif.
NTF clrResourceRateLimitReached	1.3.6.1.4.1.9.9.480.0.2			This notification is generated when the configured rate limit value specified in 'crlRateLimitResourceMax' is reached for a particular resource. This resource is identified by 'crlRateLimitResourceType' in ciscoL4L7ResourceRateLimitTable. clrResourceRateLimitReached object is superseded by clrResourceRateLimitReachedNotif.
NTF clrResourceLimitReachedNotif	1.3.6.1.4.1.9.9.480.0.3			The notification will be generated when the current resource usage identified by crlResourceLimitCurrentUsage exceeds/falls below the user configured thresholds identified by crlNotifMaxThresholdPcnt, crlNotifMinThresholdPcnt and crlNotifWatermarkPcnt. Notifications will be generated on the following conditions 1. crlResourceLimitCurrentUsage exceeds crlNotifMaxThresholdPcnt 2. crlResourceLimitCurrentUsage falls below high crlNotifWatermarkPcnt 3. crlResourceLimitCurrentUsage falls below crlNotifMinThresholdPcnt 4. crlResourceLimitCurrentUsage exceeds low crlNotifWatermarkPcnt. clrResourceLimitReachedNotif object is superseded by clrResourceLimitReachedNotifRev1.
NTF clrResourceRateLimitReachedNotif	1.3.6.1.4.1.9.9.480.0.4			The notification will be generated when the current resource rate usage identified by crlResourceRateLimitCurrentUsage exceeds/falls below the user configured thresholds identified by crlNotifMaxThresholdPcnt, crlNotifMinThresholdPcnt and crlNotifWatermarkPcnt. Notifications will be generated on the following conditions 1. crlResourceRateLimitCurrentUsage exceeds crlNotifMaxThresholdPcnt 2. crlResourceRateLimitCurrentUsage falls below high crlNotifWatermarkPcnt 3. crlResourceRateLimitCurrentUsage falls below crlNotifMinThresholdPcnt 4. crlResourceRateLimitCurrentUsage exceeds low crlNotifWatermarkPcnt clrResourceRateLimitReachedNotif object is superseded by clrResourceRateLimitReachedNotifRev1.
NTF clrResourceRateLimitReachedNotifRev1	1.3.6.1.4.1.9.9.480.0.5			The notification will be generated when the current resource usage rate identified by crlResourceRateLimitCurrentUsage exceeds/falls below the user configured thresholds identified by crlNotifMaxThresholdPcnt, crlNotifMinThresholdPcnt and crlNotifWatermarkPcnt. Notifications will be generated on the following conditions 1. crlResourceRateLimitCurrentUsage exceeds crlNotifMaxThresholdPcnt 2. crlResourceRateLimitCurrentUsage falls below high crlNotifWatermarkPcnt 3. crlResourceRateLimitCurrentUsage falls below crlNotifMinThresholdPcnt 4. crlResourceRateLimitCurrentUsage exceeds low crlNotifWatermarkPcnt
NTF clrResourceLimitReachedNotifRev1	1.3.6.1.4.1.9.9.480.0.6			The notification will be generated when the current resource usage identified by crlResourceLimitCurrentUsage exceeds/falls below the user configured thresholds identified by crlNotifMaxThresholdPcnt, crlNotifMinThresholdPcnt and crlNotifWatermarkPcnt. Notifications will be generated on the following conditions 1. crlResourceLimitCurrentUsage exceeds crlNotifMaxThresholdPcnt 2. crlResourceLimitCurrentUsage falls below high crlNotifWatermarkPcnt 3. crlResourceLimitCurrentUsage falls below crlNotifMinThresholdPcnt 4. crlResourceLimitCurrentUsage exceeds low crlNotifWatermarkPcnt.
ciscoL4L7ResourceLimitMIBObjects	1.3.6.1.4.1.9.9.480.1
crlResource	1.3.6.1.4.1.9.9.480.1.1
ciscoL4L7ResourceClassTable	1.3.6.1.4.1.9.9.480.1.1.1		not-accessible	This table contains one row per resource class. This table is used for adding/deleting the resource class in the system. A resource class can contain limits for different category of resources and these resources can be configured using other tables.
ciscoL4L7ResourceClassEntry	1.3.6.1.4.1.9.9.480.1.1.1.1		not-accessible	Information about a particular resource class. Each entry provides the name of class. The entPhysicalIndex refers to resource manageable component in entPhysicalTable with entPhysicalClass -> 'module'.
CIS crlResourceClassName	1.3.6.1.4.1.9.9.480.1.1.1.1.1	CiscoResourceClass	not-accessible	This object identifies a unique resource class in a resource manageable component identified by entPhysicalIndex.
STO crlResourceClassStorageType	1.3.6.1.4.1.9.9.480.1.1.1.1.2	StorageType	read-create	The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object can not be modified when the value of crlResourceClassRowStatus is 'active'.
ROW crlResourceClassRowStatus	1.3.6.1.4.1.9.9.480.1.1.1.1.3	RowStatus	read-create	This object is used for adding/deleting resource classes in a system.
ciscoL4L7ResourceLimitTable	1.3.6.1.4.1.9.9.480.1.1.2		not-accessible	This table is used for adding resource limits to resources in a resource class.
ciscoL4L7ResourceLimitEntry	1.3.6.1.4.1.9.9.480.1.1.2.1		not-accessible	Information about a particular resource in a resource class. Each entry provides the type of resource, the limit that is supported for that resource and type of the limit value.
CIS crlResourceLimitType	1.3.6.1.4.1.9.9.480.1.1.2.1.2	CiscoResourceLimitType	not-accessible	This object represents the type of resource in a resource class identified by crlResourceClassName.
INT crlResourceLimitValueType	1.3.6.1.4.1.9.9.480.1.1.2.1.3	INTEGER	read-create	This object represents the type of value specified in crlResourceLimitMax and crlResourceLimitMin objects. The possible values are : absolute (1) : the value represents an absolute number. percentage (2) : the value represents the % of the total available for the system. In this case only crlResourceLimitMax object is applicable.
U32 crlResourceLimitMin	1.3.6.1.4.1.9.9.480.1.1.2.1.4	Unsigned32	read-create	This object represents the rate limit allowed for the resource identified by 'ciscoResourceLimitType'. This value cannot be greater than the value specified in ciscoResourceLimitMax. The value zero signifies that this object is not applicable to the resource.
U32 crlResourceLimitMax	1.3.6.1.4.1.9.9.480.1.1.2.1.5	Unsigned32	read-create	This object represents the limit allowed for the resource identified by 'ciscoResourceLimitType'. The value zero specifies that this resource can be used until the system limit reached.
STO crlResourceLimitStorageType	1.3.6.1.4.1.9.9.480.1.1.2.1.6	StorageType	read-create	The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object cannot be modified when the value of crlResourceLimitRowStatus is 'active'.
ROW crlResourceLimitRowStatus	1.3.6.1.4.1.9.9.480.1.1.2.1.7	RowStatus	read-create	This object is used for adding/deleting entries in this table.
G32 crlResourceLimitCurrentUsage	1.3.6.1.4.1.9.9.480.1.1.2.1.8	Gauge32	read-only	This object indicates the number of resources identified by 'ciscoResourceLimitType', that are currently being used in the system.
G32 crlResourceLimitPeakUsage	1.3.6.1.4.1.9.9.480.1.1.2.1.9	Gauge32	read-only	This object represents the peak usage of the resource identified by 'ciscoResourceLimitType' since the statistics were last cleared either through the command line interface or bacause of the system reboot.
C32 crlResourceLimitReqsDeniedCountEx	1.3.6.1.4.1.9.9.480.1.1.2.1.10	Counter32	read-only	This object represents the number of resource requests that were denied when the configured resource limit is exceeded for the resource identified by 'ciscoResourceLimitType'. The value for resource limiting is specified in 'crlResourceLimitMax'.
ciscoL4L7ResourceRateLimitTable	1.3.6.1.4.1.9.9.480.1.1.4		not-accessible	This table is used for adding/deleting the rate limiting of the resources in a resource class.
ciscoL4L7ResourceRateLimitEntry	1.3.6.1.4.1.9.9.480.1.1.4.1		not-accessible	Information about an entry in the table Each entry provides the name of group, the rate configured for a resource.
CIS crlRateLimitResourceType	1.3.6.1.4.1.9.9.480.1.1.4.1.1	CiscoRateLimitResourceType	not-accessible	This object represents the resource type for which rate limiting needs to be done. The value for rate limiting is specified in crlRateLimitResourceMin and crlRateLimitResourceMax.
U32 crlRateLimitResourceMin	1.3.6.1.4.1.9.9.480.1.1.4.1.2	Unsigned32	read-create	This object represents the rate limit allowed for the resource identified by 'crlRateLimitResourceType'. This value cannot be greater than the value specified in crlRateLimitResourceMax. The value zero signifies that this object is not applicable to the resource.
U32 crlRateLimitResourceMax	1.3.6.1.4.1.9.9.480.1.1.4.1.3	Unsigned32	read-create	This object represents the limit allowed for the resource identified by 'crlRateLimitResourceType'. The value zero specifies that this resource can be used until the system limit reached.
STO crlRateLimitResourceStorageType	1.3.6.1.4.1.9.9.480.1.1.4.1.4	StorageType	read-create	The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object cannot be modified when the value of crlRateLimitResourceRowStatus is 'active'.
ROW crlRateLimitResourceRowStatus	1.3.6.1.4.1.9.9.480.1.1.4.1.5	RowStatus	read-create	This object is used for adding/deleting entries in this table. This object cannot be set to 'active' until all the mandatory objects have valid value.
G32 crlRateLimitResourceCurrentUsage	1.3.6.1.4.1.9.9.480.1.1.4.1.6	Gauge32	read-only	This object indicates the number of resources identified by 'crlRateLimitResourceType', that are currently being used in the system.
G32 crlRateLimitResourcePeakUsage	1.3.6.1.4.1.9.9.480.1.1.4.1.7	Gauge32	read-only	This object represents the peak usage of the resource identified by 'crlRateLimitResourceType' since the statistics were last cleared either through the command line interface or bacause of the system reboot.
C32 crlRateLimitResourceReqsDeniedCount	1.3.6.1.4.1.9.9.480.1.1.4.1.8	Counter32	read-only	This object represents the number of resource requests that were denied when the configured rate limit is exceeded for the resource identified by 'crlRateLimitResourceType'. The value for rate limiting is specified in 'crlRateLimitResourceMax'.
ciscoL4L7ResourceUsageSummaryTable	1.3.6.1.4.1.9.9.480.1.1.5		not-accessible	This table provides the statistics for each resource type in a system. The resource usage statistics can be: - current usage for the resource. - peak usage for the resource. - Number of times the resource request were denied when the configured limit or rate-limit is exceeded for the resource.
ciscoL4L7ResourceUsageSummaryEntry	1.3.6.1.4.1.9.9.480.1.1.5.1		not-accessible	An entry in ciscoL4L7ResourceUsageSummaryTable. Each entry provides the resource usage parameters in a system. An entry is created when an entry is created in either 'ciscoL4L7ResourceLimitTable' or 'ciscoL4L7ResourceRateLimitTable'. An entry is deleted when an entry is deleted from either 'ciscoL4L7ResourceLimitTable' or 'ciscoL4L7ResourceRateLimitTable'.
CIS crlResourceSummaryType	1.3.6.1.4.1.9.9.480.1.1.5.1.1	CiscoResourceType	not-accessible	This object represents a type of resource in the system.
G32 crlResourceSummaryCurrentUsage	1.3.6.1.4.1.9.9.480.1.1.5.1.2	Gauge32	read-only	This object indicates the current usage of the resource in the system.
G32 crlResourceSummaryPeakUsage	1.3.6.1.4.1.9.9.480.1.1.5.1.3	Gauge32	read-only	This object represents the peak usage of the resource in the system.
C64 crlResourceSummaryReqsDeniedCount	1.3.6.1.4.1.9.9.480.1.1.5.1.4	Counter64	read-only	This object represents the number of resource requests that were denied in the system when the configured limit is exceeded for the resource. The value for limiting is specified in 'crlResourceLimitMax' and the value for rate limiting is specified in 'crlRateLimitResourceMax'.
TIM crlResourceSummaryLastClearedTime	1.3.6.1.4.1.9.9.480.1.1.5.1.5	TimeStamp	read-only	This object represents the time when the value of the object identified by 'crlResourceSummaryPeakUsage' is last cleared or reset. A value of 0 (zero) signifies that the value has not been cleared since the last system reboot.
STO crlResourceSummaryStorageType	1.3.6.1.4.1.9.9.480.1.1.5.1.6	StorageType	read-create	The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. This object cannot be modified when the value of 'crlResourceSummaryRowStatus' is 'active'.
ROW crlResourceSummaryRowStatus	1.3.6.1.4.1.9.9.480.1.1.5.1.7	RowStatus	read-create	This object is used for adding/deleting entries in this table. This object cannot be set to 'active' until all the mandatory objects have valid value.
ciscoL4L7BufferUtilizationTable	1.3.6.1.4.1.9.9.480.1.1.6		not-accessible	This table provides the statistics for buffer utilization in a system. The buffer utilization statistics can be: - absolute buffer usage value per network processor(NP). - percentage buffer usage per network processor(NP).
ciscoL4L7BufferUtilizationEntry	1.3.6.1.4.1.9.9.480.1.1.6.1		not-accessible	An entry in ciscoL4L7BufferUtilizationTable. Each entry provides the buffer usage in a system.
U32 clrNetworkProcessor	1.3.6.1.4.1.9.9.480.1.1.6.1.1	Unsigned32	not-accessible	This object represents network processor number(NP) in the system.
G32 crlBufferUsageValue	1.3.6.1.4.1.9.9.480.1.1.6.1.2	Gauge32	read-only	This object indicates the absolute buffer usage in the system.
CIS crlPercentageBufferUsage	1.3.6.1.4.1.9.9.480.1.1.6.1.3	CiscoBufferUtilPercentage	read-only	This object represents the percentage buffer usage in the the decimal format to allow historical information to be collected.
STR crlPercentageBufferUsageDisplay	1.3.6.1.4.1.9.9.480.1.1.6.1.4	SnmpAdminString	read-only	This object represents the percentage buffer usage in the string format to all interactive access to simple display format.
G32 crlExternalBufferUsageValue	1.3.6.1.4.1.9.9.480.1.1.6.1.5	Gauge32	read-only	This object indicates the absolute external buffer usage in the system.
CIS crlExternalPercentageBufferUsage	1.3.6.1.4.1.9.9.480.1.1.6.1.6	CiscoBufferUtilPercentage	read-only	This object represents the percentage external buffer usage in the the decimal format to allow historical information to be collected.
STR crlExternalPercentageBufferUsageDisplay	1.3.6.1.4.1.9.9.480.1.1.6.1.7	SnmpAdminString	read-only	This object represents the percentage external buffer usage in the string format to all interactive access to simple display format.
ciscoL4L7NpCpuUtilTable	1.3.6.1.4.1.9.9.480.1.1.7		not-accessible	This table lists the CPU utilization statistics for each NP (network processor) in the device.
ciscoL4L7NpCpuUtilEntry	1.3.6.1.4.1.9.9.480.1.1.7.1		not-accessible	Each row contains the average CPU utilization of all sub-processors for a network processor identified by its clrNetworkProcessor value.
G32 clrNpCpuUtilizationAverage	1.3.6.1.4.1.9.9.480.1.1.7.1.1	Gauge32	read-only	This object indicates the average CPU utilization of all sub-processors belonged to a particular network processor at that instance.
crlNotificationObjects	1.3.6.1.4.1.9.9.480.1.2
T/F clrResourceLimitReachedNotifEnabled	1.3.6.1.4.1.9.9.480.1.2.1	TruthValue	read-write	This object controls the generation of 'clrResourceLimitReachedNotifRev1' notification. 'true' Indicates that clrResourceLimitReachedNotifRev1 notification is to be generated when the configured resource limit is reached. 'false' Indicates that clrResourceLimitReachedNotifRev1 notification generation is disabled.
T/F clrResourceRateLimitReachedNotifEnabled	1.3.6.1.4.1.9.9.480.1.2.2	TruthValue	read-write	This object controls the generation of 'clrResourceRateLimitReachedNotifRev1' notification. 'true' Indicates that clrResourceRateLimitReachedNotifRev1 notification is to be generated when the configured resource rate limit is reached. 'false' Indicates that clrResourceRateLimitReachedNotifRev1 notification generation is disabled.
crlNotificationOnlyObjects	1.3.6.1.4.1.9.9.480.1.3
INT crlNotifType	1.3.6.1.4.1.9.9.480.1.3.1	INTEGER	accessible-for-notify	This object indicates type of notification.
INT crlNotifContextOrSystem	1.3.6.1.4.1.9.9.480.1.3.2	INTEGER	accessible-for-notify	This object indicates the notification sent is at the system level or at the context level.
STR crlNotifContextName	1.3.6.1.4.1.9.9.480.1.3.3	SnmpAdminString	accessible-for-notify	This object indicates the context name associated with notifications.
U32 crlNotifCurrentUsagePcnt	1.3.6.1.4.1.9.9.480.1.3.4	Unsigned32	accessible-for-notify	This object indicates the current usage percent of the resource associated with notifications.
U32 crlNotifMaxThresholdPcnt	1.3.6.1.4.1.9.9.480.1.3.5	Unsigned32	accessible-for-notify	This object indicates the maximum threshold percent of the resource/rate associated with notifications. This object is used to raise the risingHighThresh notification when the current usage identified by crlNotifCurrentUsagePcnt exceeds maximum threshold identified by crlNotifMaxThresholdPcnt.
U32 crlNotifWatermarkPcnt	1.3.6.1.4.1.9.9.480.1.3.6	Unsigned32	accessible-for-notify	This object indicates the watermark threshold percent of the resource/rate associated with notifications. This object is used to raise the risingWatermarkThresh/fallingWatermarkThresh notifications when the current usage identified by crlNotifCurrentUsagePcnt exceeds high or falls below watermark threshold identified by crlNotifWatermarkPcnt.
U32 crlNotifMinThresholdPcnt	1.3.6.1.4.1.9.9.480.1.3.7	Unsigned32	accessible-for-notify	This object indicates the minimum threshold percent of the resource/rate associated with notifications. This object is used to raise the fallingWatermarkThresh notification when the current usage identified by crlNotifCurrentUsagePcnt falls below minimum threshold identified by crlNotifMinThresholdPcnt.
INT crlNotifSourceType	1.3.6.1.4.1.9.9.480.1.3.8	INTEGER	accessible-for-notify	This object indicates the notification sent is at the real server level or at virtual ip level. Rserver is a real server e.g. a linux machine which services the client requests. Virtual IP is a IP address which is advertised to the outside world from the Data Center for communication with the server.
STR crlNotifRealServerName	1.3.6.1.4.1.9.9.480.1.3.9	SnmpAdminString	accessible-for-notify	This object indicates the real server name associated with notifications.
IPt crlNotifVirtualIPAddrType	1.3.6.1.4.1.9.9.480.1.3.10	InetAddressType	accessible-for-notify	This object indicates type of the Virtual IP address i.e. IPv4 or IPv6.
IP crlNotifVirtualIPAddress	1.3.6.1.4.1.9.9.480.1.3.11	InetAddress	accessible-for-notify	This object indicates the Virtual IP (VIP) Adress associated with notifications.
ciscoResourceLimitMIBConform	1.3.6.1.4.1.9.9.480.2
ciscoL4L7ResourceLimitConformance	1.3.6.1.4.1.9.9.480.3
ciscoL4L7ResourceLimitCompliances	1.3.6.1.4.1.9.9.480.3.1
ciscoL4L7ResourceLimitCompliance	1.3.6.1.4.1.9.9.480.3.1.1			The compliance statement for SNMP entities which implement CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
ciscoL4L7ResourceLimitComplianceRev1	1.3.6.1.4.1.9.9.480.3.1.2			The compliance statement for SNMP entities which implement CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
ciscoL4L7ResourceLimitComplianceRev2	1.3.6.1.4.1.9.9.480.3.1.3			The compliance statement for SNMP entities which implement CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
ciscoL4L7ResourceLimitComplianceRev3	1.3.6.1.4.1.9.9.480.3.1.4			The compliance statement for SNMP entities which implement CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
ciscoL4L7ResourceLimitComplianceRev4	1.3.6.1.4.1.9.9.480.3.1.5			The compliance statement for SNMP entities which implement CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
ciscoL4L7ResourceLimitComplianceRev5	1.3.6.1.4.1.9.9.480.3.1.6			The compliance statement for SNMP entities which implement CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
ciscoL4L7ResourceLimitComplianceRev6	1.3.6.1.4.1.9.9.480.3.1.7			The compliance statement for SNMP entities which implement CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
ciscoL4L7ResourceLimitComplianceRev7	1.3.6.1.4.1.9.9.480.3.1.8			The compliance statement for SNMP entities which implement CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB.
ciscoL4L7ResourceLimitGroups	1.3.6.1.4.1.9.9.480.3.2
ciscoL4L7ResourceClassGroup	1.3.6.1.4.1.9.9.480.3.2.1			The collection of objects which are used to represent resource class in a system.
ciscoL4L7ResourceLimitGroup	1.3.6.1.4.1.9.9.480.3.2.2			The collection of objects which are used to represent limits of resources in a resource class.
ciscoL4L7ResourceRateLimitGroup	1.3.6.1.4.1.9.9.480.3.2.3			The collection of objects which are used to represent rate limits for resources.
ciscoL4L7ResourceLimitUsageGroup	1.3.6.1.4.1.9.9.480.3.2.4			The collection of objects which are used to represent limit usage for resources.
ciscoL4L7ResourceRateLimitUsageGroup	1.3.6.1.4.1.9.9.480.3.2.5			The collection of objects which are used to represent rate limit usage for resources.
ciscoL4L7ResourceNotifEnabledGroup	1.3.6.1.4.1.9.9.480.3.2.6			The collection of objects which are used to represent limit usage for resources.
ciscoL4L7ResourceNotifGroup	1.3.6.1.4.1.9.9.480.3.2.7			The collection of objects which are used to represent rate limit usage for resources. ciscoL4L7ResourceNotifGroup object is superseded by ciscoL4L7ResourceNotifGroupRev1.
ciscoL4L7ResourceUsageSummaryGroup	1.3.6.1.4.1.9.9.480.3.2.8			The collection of objects which are used to represent usage summary for resources across the system.
ciscoL4L7BufferUtilizationGroup	1.3.6.1.4.1.9.9.480.3.2.9			The collection of objects which are used to represent buffer utilization across the system. ciscoL4L7BufferUtilizationGroup object is superseded by ciscoL4L7BufferUtilizationGroupRev1.
ciscoL4L7NpCpuUtilizationGroup	1.3.6.1.4.1.9.9.480.3.2.10			A collection of objects providing CPU utilization of network processors.
ciscoL4L7BufferUtilizationGroupRev1	1.3.6.1.4.1.9.9.480.3.2.11			The collection of objects which are used to represent buffer utilization across the system.
ciscoL4L7ResourceNotifGroupRev1	1.3.6.1.4.1.9.9.480.3.2.12			The collection of notifications which are used to report resources usages to raising/falling below the configured thresholds. ciscoL4L7ResourceNotifGroupRev1 object is superseded by ciscoL4L7ResourceNotifGroupRev2.
ciscoL4L7ResourceNotifOnlyObjectsGroup	1.3.6.1.4.1.9.9.480.3.2.13			A collection of object(s) providing variable binding information for resource notifications.
ciscoL4L7ResourceNotifGroupRev2	1.3.6.1.4.1.9.9.480.3.2.14			The collection of notifications which are used to report resources usages to raising/falling below the configured thresholds.
ciscoL4L7ResourceNotifOnlyObjectsGroupExt	1.3.6.1.4.1.9.9.480.3.2.15			A collection of object(s) providing variable binding information for resource notifications.

RFC description

Manages resource class limits for TCP connections, MAC addresses, and NAT translations on L4-L7 modules.

Start monitoring Cisco Layer 4-7 service modules / security appliances with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-L4L7MODULE-RESOURCE-LIMIT-MIB