CISCO-MGX82XX-VIRTUAL-PORT-MIB

All MIBs › CISCO-MGX82XX-VIRTUAL-PORT-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2002-08-30

Category: ATM, Cisco Devices, Hardware and Environment, Network Interfaces

Description: Manages virtual port configuration for ATM and Frame Relay connections on Cisco MGX 8200 WAN switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-MGX82XX-VIRTUAL-PORT-MIB?

CISCO-MGX82XX-VIRTUAL-PORT-MIB manages and reports on virtual ports configured on the PXM1 service module within Cisco MGX 8200-series multiservice WAN switches. It provides both configuration data (virtual interface state, queue memory, min/max cell rate, configured paths) and runtime statistics/counters for each virtual interface. This makes it directly useful for monitoring hardware/software operational status: vrtlIntrState indicates whether a virtual port is operationally up or down, and the counter table tracks cell-level traffic to reveal congestion or configuration cell-rate violations. It is part of the CISCO-MGX82XX-* MIB family and depends on the underlying PXM1 module and ATM interface conventions for virtual port identity. It is deployed on Cisco MGX 8220/8250 switches wherever PXM1 virtual ports are used to subdivide a physical ATM trunk into multiple logically-managed interfaces. Engineers can download the CISCO-MGX82XX-VIRTUAL-PORT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-MGX82XX-VIRTUAL-PORT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco MGX 8250 WAN switch (PXM1 module)
Cisco MGX 8220 WAN switch (PXM1 module)

Monitoring Examples

vrtlIntrConfigTable/vrtlIntrConfigEntry expose vrtlIntrState, vrtlIntrMinCellRate, and vrtlIntrMaxCellRate for each virtual interface (indexed by configVrtlIntrNum and vrtlIntrPortNum), letting an operator confirm a virtual port is enabled and correctly rate-limited. The companion vrtlIntrCounterTable/vrtlIntrCounterEntry (keyed by countVrtlIntrNum) provides cell counters that reveal whether traffic on a virtual port is approaching vrtlIntrMaxCellRate. vrtlIntrCurrConfigPaths shows the number of paths currently configured on the port, useful for detecting unexpected path additions/removals.

What Can Be Monitored

virtual port operational state
min/max cell rate
configured path count
virtual port cell counters/traffic

Imported Objects

From BASIS-MIB

virtualInterface

OBJECT-IDENTITY

From CISCOWAN-SMI

ciscoWan

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
MODULE-IDENTITY
OBJECT-TYPE

How to Use in IPNetwork Monitor

Example using vrtlIntrTotalCellCnt OID:

Select a Cisco MGX 8250/8220 WAN switch (PXM1 module, legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type vrtlIntrTotalCellCnt into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the total number of cells (VC plus Qbin) that belong to this Virtual Interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoMgx82xxVirtualPortMIB	1.3.6.1.4.1.351.150.38			The MIB module for configuration ond reporting statistics of virtual ports in PXM1 Service module in MGX82xx series.
cmvPortCompliance	1.3.6.1.4.1.351.150.38.2.2.1			The compliance statement for objects related to SRM MIB.
cmvPortConfGroup	1.3.6.1.4.1.351.150.38.2.1.1			The collection of objects which are used for configuring Virtual Ports in PXM1 service module.
cmvPortMIBCompliances	1.3.6.1.4.1.351.150.38.2.2
cmvPortMIBConformance	1.3.6.1.4.1.351.150.38.2
cmvPortMIBGroups	1.3.6.1.4.1.351.150.38.2.1
cmvPortQbinConfGroup	1.3.6.1.4.1.351.150.38.2.1.3			The collection of objects related to configuration of Qbin related things in PXM1 service module.
cmvPortQbinStatsGroup	1.3.6.1.4.1.351.150.38.2.1.4			The collection of objects related to statistics for Qbin related things in PXM1 service module.
cmvPortStatsGroup	1.3.6.1.4.1.351.150.38.2.1.2			The collection of objects related to statistics for Virtual Ports in PXM1 service module.
I32 configVrtlIntrNum	1.3.6.1.4.1.351.110.5.2.8.1.1.1.1	Integer32	read-only	Virtual Interface Number. There are totaly. 32 Virtual Interfaces on the card (egress).
I32 countVrtlIntrNum	1.3.6.1.4.1.351.110.5.2.8.2.1.1.1	Integer32	read-only	Virtual Interface Number.
I32 queConfigVrtlIntrNum	1.3.6.1.4.1.351.110.5.2.8.3.1.1.1	Integer32	read-only	Virtual Interface Number.
I32 queConfigVrtlIntrQbinNum	1.3.6.1.4.1.351.110.5.2.8.3.1.1.2	Integer32	read-only	Virtual Interface Qbin Number. There are totaly 16 Qbin per Virtual Interface.
INT queConuterVrtlIntrNum	1.3.6.1.4.1.351.110.5.2.8.4.1.1.1	INTEGER	read-only	Virtual Interface Number.
INT queCounterVrtlIntrQbinNum	1.3.6.1.4.1.351.110.5.2.8.4.1.1.2	INTEGER	read-only	Virtual Interface Qbin Number. There are totaly 16 Qbin per Virtual Interface.
virtualInterfaceCnf	1.3.6.1.4.1.351.110.5.2.8.1
virtualInterfaceCnt	1.3.6.1.4.1.351.110.5.2.8.2
virtualInterfaceQbinCnf	1.3.6.1.4.1.351.110.5.2.8.3
virtualInterfaceQbinCnt	1.3.6.1.4.1.351.110.5.2.8.4
vrtlIntrConfigEntry	1.3.6.1.4.1.351.110.5.2.8.1.1.1		not-accessible	An entry in the Virtual Interface configuration Table.
vrtlIntrConfigTable	1.3.6.1.4.1.351.110.5.2.8.1.1		not-accessible	Virtual Interface Configuration Table.
vrtlIntrCounterEntry	1.3.6.1.4.1.351.110.5.2.8.2.1.1		not-accessible	An entry in the Virtual Interface Counter32 Table.
vrtlIntrCounterTable	1.3.6.1.4.1.351.110.5.2.8.2.1		not-accessible	Virtual Interface Counter32s Table.
I32 vrtlIntrCurrConfigPaths	1.3.6.1.4.1.351.110.5.2.8.1.1.1.7	Integer32	read-only	This is not a configurable parameter. This gives the count of paths currently configured on this virtual interface.
I32 vrtlIntrMaxCellRate	1.3.6.1.4.1.351.110.5.2.8.1.1.1.6	Integer32	read-write	Virtual Interface's maximum cell rate. The default value: for OC12 port is 1412832 cells/sec for OC3 port is 353208 cells/sec for T3 port is 96000 cells/sec for E3 port is 80000 cells/sec
I32 vrtlIntrMaxQueMem	1.3.6.1.4.1.351.110.5.2.8.1.1.1.4	Integer32	read-write	Virtual Interface's Max queue memory. 1 = 4Kcells 2 = 8Kcells 3 = 16Kcells 4 = 32Kcells 5 = 64Kcells 6 = 128Kcells 7 = 256Kcells 8 = 512Kcells.
I32 vrtlIntrMinCellRate	1.3.6.1.4.1.351.110.5.2.8.1.1.1.5	Integer32	read-write	Virtual Interface's minimum cell rate. The default value: for OC12 port is 1412832 cells/sec for OC3 port is 353208 cells/sec for T3 port is 96000 cells/sec for E3 port is 80000 cells/sec
I32 vrtlIntrPortNum	1.3.6.1.4.1.351.110.5.2.8.1.1.1.2	Integer32	read-write	Port number which will be connected to the Virtual Interface. Value zero meens that this virtual interface is not connected to any port.
I32 vrtlIntrQbinClpHiThreshold	1.3.6.1.4.1.351.110.5.2.8.3.1.1.8	Integer32	read-write	The threshold above which the tagged cells will be dropped. The Get value will be different from the Set value because of FW internal round up.
I32 vrtlIntrQbinClpLoThreshold	1.3.6.1.4.1.351.110.5.2.8.3.1.1.9	Integer32	read-write	Valid only if congestion control is set to CLP hysterises. The threshold upto which the dropping of the tagged cells should continue once it has crossed CLP HI threshold. The Get value will be different from the Set value because of FW internal round up.
vrtlIntrQbinConfigEntry	1.3.6.1.4.1.351.110.5.2.8.3.1.1		not-accessible	An entry in the Virtual Interface Qbin Config Table.
vrtlIntrQbinConfigTable	1.3.6.1.4.1.351.110.5.2.8.3.1		not-accessible	Virtual Interface QBin Configuration Table.
vrtlIntrQbinCounterEntry	1.3.6.1.4.1.351.110.5.2.8.4.1.1		not-accessible	An entry in the Virtual Interface Qbin Counter Table. Each entry contains information on the statistics supported for an interface.
vrtlIntrQbinCounterTable	1.3.6.1.4.1.351.110.5.2.8.4.1		not-accessible	Virtual Interface QBin Counter Table.
C32 vrtlIntrQbinCurrentCellCnt	1.3.6.1.4.1.351.110.5.2.8.4.1.1.3	Counter32	read-only	Total number of cells currently in the Qbin.
C32 vrtlIntrQbinDiscardedCellCnt	1.3.6.1.4.1.351.110.5.2.8.4.1.1.6	Counter32	read-only	Total number of arrivals to QBIN which were discarded.
INT vrtlIntrQbinDiscardSelection	1.3.6.1.4.1.351.110.5.2.8.3.1.1.6	INTEGER	read-write	Virtual Interface QBin Congestion control option.
I32 vrtlIntrQbinEfciThreshold	1.3.6.1.4.1.351.110.5.2.8.3.1.1.11	Integer32	read-write	The threshold above which the EFCI bits of the cell is set. The Get value will be different from the Set value because of FW internal round up.
I32 vrtlIntrQbinFrameDiscardThreshold	1.3.6.1.4.1.351.110.5.2.8.3.1.1.10	Integer32	read-write	Valid only if congestion control is set to Frame Discard. It is the threshold after which the QE will start discarding the entire frame if one or more cells of the frame is discarded.. The Get value will be different from the Set value because of FW internal round up.
I32 vrtlIntrQbinMaxThreshold	1.3.6.1.4.1.351.110.5.2.8.3.1.1.7	Integer32	read-write	Max cells that can be queued in the QBIN. The Get value will be different from the Set value because of FW internal round up.
I32 vrtlIntrQbinPri	1.3.6.1.4.1.351.110.5.2.8.3.1.1.4	Integer32	read-write	This indicates the priority of the QBIN service within the Virtual Interface.
I32 vrtlIntrQbinRate	1.3.6.1.4.1.351.110.5.2.8.3.1.1.5	Integer32	read-write	The rate at which cells in the QBIN are serviced. Max Cell rate for OC3 interface is 353208 cell/sec.
C32 vrtlIntrQbinRxdCellCnt	1.3.6.1.4.1.351.110.5.2.8.4.1.1.4	Counter32	read-only	Total number of cells arrived to the QBIN.
INT vrtlIntrQbinState	1.3.6.1.4.1.351.110.5.2.8.3.1.1.3	INTEGER	read-write	Virtual Interface QBIN state.
C32 vrtlIntrQbinTxdCellCnt	1.3.6.1.4.1.351.110.5.2.8.4.1.1.5	Counter32	read-only	Total number of cells departured from QBIN.
C32 vrtlIntrRxdClpTaggedCellCnt	1.3.6.1.4.1.351.110.5.2.8.2.1.1.7	Counter32	read-only	Total number of CLP-1 cells Received.
C32 vrtlIntrRxdClpTaggedDiscardedCellCnt	1.3.6.1.4.1.351.110.5.2.8.2.1.1.9	Counter32	read-only	Total number of CLP-1 cells discarded at Ingress.
C32 vrtlIntrRxdClpUntaggedCellCnt	1.3.6.1.4.1.351.110.5.2.8.2.1.1.6	Counter32	read-only	Total number of CLP-0 cells Received.
C32 vrtlIntrRxdClpUntaggedDiscardedCellCnt	1.3.6.1.4.1.351.110.5.2.8.2.1.1.8	Counter32	read-only	Total number of CLP-0 cells discarded at Ingress.
C32 vrtlIntrRxdRmCellCnt	1.3.6.1.4.1.351.110.5.2.8.2.1.1.5	Counter32	read-only	Total number of RM cells Received.
C32 vrtlIntrRxdValidOAMCellCnt	1.3.6.1.4.1.351.110.5.2.8.2.1.1.4	Counter32	read-only	Total number of OAM cell received.
INT vrtlIntrState	1.3.6.1.4.1.351.110.5.2.8.1.1.1.3	INTEGER	read-write	Virtual Interface State.
C32 vrtlIntrTotalCellCntEx	1.3.6.1.4.1.351.110.5.2.8.2.1.1.2	Counter32	read-only	Total number of cells (VC plus Qbin) that belong to this Virtual Interface.
C32 vrtlIntrTotalQbinCellCnt	1.3.6.1.4.1.351.110.5.2.8.2.1.1.3	Counter32	read-only	Total number of cells in the Qbin belonging to this Virtual Interface.
C32 vrtlIntrXmtdClpTaggedCellCnt	1.3.6.1.4.1.351.110.5.2.8.2.1.1.13	Counter32	read-only	Total number of CLP-1 cells transmitted.
C32 vrtlIntrXmtdClpUntaggedCellCnt	1.3.6.1.4.1.351.110.5.2.8.2.1.1.12	Counter32	read-only	Total number of CLP-0 cells transmitted.
C32 vrtlIntrXmtdOAMCellCnt	1.3.6.1.4.1.351.110.5.2.8.2.1.1.10	Counter32	read-only	Total number of OAM cells transmitted.
C32 vrtlIntrXmtdRmCellCnt	1.3.6.1.4.1.351.110.5.2.8.2.1.1.11	Counter32	read-only	Total number of RM(Resource Monitoring) cells transmitted.

RFC description

Monitors virtual ports and performance metrics in Cisco MGX82xx carrier-class switches.

Start monitoring Cisco MGX 8250/8220 WAN switch (PXM1 module, legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-MGX82XX-VIRTUAL-PORT-MIB