All MIBs › CIOMIB
Category: Cisco Devices
Description: Manages Cisco I/O module operations and interface I/O statistics.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CIOMIB?
CIOMIB is a Cisco enterprise MIB whose sample objects (adaptec/storagemanagement naming, devTable/devEntry structures) indicate it centers on Cisco I/O module and attached storage device management, tracking device inventory and I/O module operational data. It exposes a device table describing each detected I/O device's type, description, sub-identifier, media block size, formatted media capacity, and whether it is removable and currently loaded, alongside module revision information. For monitoring purposes it is primarily useful for tracking hardware inventory and status -- specifically whether removable media/storage devices are present ("loaded"), their type and capacity, and the firmware/software revision (revMajor/revMinor) of the I/O subsystem. It appears to build on Adaptec storage-management conventions given the "adaptec"/"storagemanagement" object identifiers in its tree. It is typically deployed on Cisco platforms (such as storage-capable routers/appliances or media gateways) that include removable storage or I/O modules needing inventory tracking. Engineers can download the CIOMIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CIOMIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Adaptec storage management agent hosts (legacy)
Monitoring Examples
An administrator polls deviceTable (devEntry: devIndex, devType, devTypeDescr, devMediaBlockSize, devFormattedMediaCapacity) to enumerate attached I/O/storage devices and their capacities, and checks devRemovableDevice combined with devLoaded to detect whether a removable media device (e.g., a tape or disk cartridge) is currently inserted. If devLoaded unexpectedly changes to "not loaded" during a backup job, this would indicate the media was ejected or failed, revealing an operational fault. revMajor/revMinor can also be checked to confirm the I/O module's firmware revision matches the expected baseline.
What Can Be Monitored
- attached I/O/storage device inventory
- device type and media capacity
- removable media loaded/present status
- I/O module firmware revision (revMajor/revMinor)
This MIB depends on
Related MIBs
Imported Objects
From RFC-1212
| OBJECT-TYPE |
From RFC-1215
| TRAP-TYPE |
From RFC1155-SMI
| Counter | |
| enterprises |
From RFC1213-MIB
| DisplayString |
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| adaptec | 1.3.6.1.4.1.795 | |||
| storagemanagement | 1.3.6.1.4.1.795.2 | |||
| cio2 | 1.3.6.1.4.1.795.2.12 | |||
| NTF cycStorageControllerStateChange | 1.3.6.1.4.1.795.2.12.0.101 | CIO storage controller %d has changed state. | ||
| NTF cycBusPortStateChange | 1.3.6.1.4.1.795.2.12.0.102 | CIO bus port %d has changed state. | ||
| NTF cycStorageDeviceStateChange | 1.3.6.1.4.1.795.2.12.0.103 | CIO storage device %d has changed state. | ||
| NTF cycVolumeSetStateChange | 1.3.6.1.4.1.795.2.12.0.104 | CIO volume set %d has changed state. | ||
| NTF cycVolumeSetActivityChange | 1.3.6.1.4.1.795.2.12.0.105 | CIO volume set %d has changed activity. | ||
| NTF cycSpareStateChange | 1.3.6.1.4.1.795.2.12.0.106 | CIO spare %d has changed state. | ||
| NTF cycEnclosureStateChange | 1.3.6.1.4.1.795.2.12.0.107 | A component in CIO enclosure %d has changed state. | ||
| mibRevision | 1.3.6.1.4.1.795.2.12.1 | |||
| INT revMajor | 1.3.6.1.4.1.795.2.12.1.1 | INTEGER | read-only | The major number of the revision of the CIO MIB. |
| INT revMinor | 1.3.6.1.4.1.795.2.12.1.2 | INTEGER | read-only | The minor number of the revision of the CIO MIB. |
| storageDevice | 1.3.6.1.4.1.795.2.12.2 | |||
| deviceTable | 1.3.6.1.4.1.795.2.12.2.1 | not-accessible | A list of storage devices. | |
| devEntry | 1.3.6.1.4.1.795.2.12.2.1.1 | not-accessible | A storage device entry. | |
| INT devIndex | 1.3.6.1.4.1.795.2.12.2.1.1.1 | INTEGER | read-only | A unique index value for each storage device beginning with 1. |
| INT devType | 1.3.6.1.4.1.795.2.12.2.1.1.2 | INTEGER | read-only | The type of this mass storage device. |
| STR devTypeDescr | 1.3.6.1.4.1.795.2.12.2.1.1.3 | DisplayString | read-only | A longer description of the storage device. For example: 3.5 inch flexible diskette drives using diskettes with a maximum capacity of 1.44MB. |
| STR devSubIdentifier | 1.3.6.1.4.1.795.2.12.2.1.1.4 | DisplayString | read-only | The sub-identifier for this storage device (e.g., the device's SCSI logical unit number). |
| INT devMediaBlockSize | 1.3.6.1.4.1.795.2.12.2.1.1.5 | INTEGER | read-only | The size in bytes of the data blocks used on the storage media. If the media block size is unknown or inconsistent then this value shall be zero. |
| INT devFormattedMediaCapacity | 1.3.6.1.4.1.795.2.12.2.1.1.6 | INTEGER | read-only | The total size in kilobytes of this storage media after it has been formatted. |
| INT devRemovableDevice | 1.3.6.1.4.1.795.2.12.2.1.1.7 | INTEGER | read-only | If true, then this storage device is removable (e.g.: PCMCIA device). |
| INT devLoaded | 1.3.6.1.4.1.795.2.12.2.1.1.8 | INTEGER | read-only | If true, then the storage device is loaded. |
| INT devRemovableMedia | 1.3.6.1.4.1.795.2.12.2.1.1.9 | INTEGER | read-only | If true, then the media in this storage device is removable. |
| INT devMediaLoaded | 1.3.6.1.4.1.795.2.12.2.1.1.10 | INTEGER | read-only | If true, the media in this storage device is loaded. |
| INT devCompression | 1.3.6.1.4.1.795.2.12.2.1.1.11 | INTEGER | read-only | If true, the storage device supports compression. |
| INT devEncryption | 1.3.6.1.4.1.795.2.12.2.1.1.12 | INTEGER | read-only | If true, the storage device supports encryption. |
| storageController | 1.3.6.1.4.1.795.2.12.3 | |||
| ctlrTable | 1.3.6.1.4.1.795.2.12.3.1 | not-accessible | A list of storage controllers. | |
| ctlrEntry | 1.3.6.1.4.1.795.2.12.3.1.1 | not-accessible | A storage controller entry. | |
| INT ctlrIndex | 1.3.6.1.4.1.795.2.12.3.1.1.1 | INTEGER | read-only | A unique index value for each storage controller beginning with 1. |
| STR ctlrDescription | 1.3.6.1.4.1.795.2.12.3.1.1.2 | DisplayString | read-only | Name, brand, and hardware revision level of the storage controller. |
| INT ctlrProtectionManagement | 1.3.6.1.4.1.795.2.12.3.1.1.3 | INTEGER | read-only | Indicates whether or not the controller provides redundancy or protection against device failures. |
| INT ctlrBusMaster | 1.3.6.1.4.1.795.2.12.3.1.1.4 | INTEGER | read-only | If TRUE, then this storage controller is the bus master. |
| INT ctlrSecondsSinceLastPowerUp | 1.3.6.1.4.1.795.2.12.3.1.1.5 | INTEGER | read-only | The number of seconds that have passed since this controller was last powered on. |
| enclosure | 1.3.6.1.4.1.795.2.12.4 | |||
| enclTable | 1.3.6.1.4.1.795.2.12.4.1 | not-accessible | A list of enclosures. | |
| enclEntry | 1.3.6.1.4.1.795.2.12.4.1.1 | not-accessible | An enclosure entry. | |
| INT enclIndex | 1.3.6.1.4.1.795.2.12.4.1.1.1 | INTEGER | read-only | A unique index value for each enclosure beginning with 1. |
| INT enclType | 1.3.6.1.4.1.795.2.12.4.1.1.2 | INTEGER | read-only | The type of the enclosure. |
| STR enclDescription | 1.3.6.1.4.1.795.2.12.4.1.1.3 | DisplayString | read-only | Description of the enclosure. |
| busPort | 1.3.6.1.4.1.795.2.12.5 | |||
| busPortTable | 1.3.6.1.4.1.795.2.12.5.1 | not-accessible | A list of bus ports. | |
| busPortEntry | 1.3.6.1.4.1.795.2.12.5.1.1 | not-accessible | A bus port entry. | |
| INT portIndex | 1.3.6.1.4.1.795.2.12.5.1.1.1 | INTEGER | read-only | A unique index value for each bus port beginning with 1. |
| INT portProtocol | 1.3.6.1.4.1.795.2.12.5.1.1.2 | INTEGER | read-only | The protocol describing the electrical characteristics of the Bus Port. If 'Other' is used, then the Protocol Description attribute shall be used. |
| STR portProtocolDescription | 1.3.6.1.4.1.795.2.12.5.1.1.3 | DisplayString | read-only | Additional description of the protocol describe above. |
| INT portSignalCharacteristics | 1.3.6.1.4.1.795.2.12.5.1.1.4 | INTEGER | read-only | The electrical characteristics of the Bus Port being described. |
| STR portAddressDescriptor | 1.3.6.1.4.1.795.2.12.5.1.1.5 | DisplayString | read-only | The address descriptor for this bus port. For example the PCI slot and ID. |
| INT portIsochronous | 1.3.6.1.4.1.795.2.12.5.1.1.6 | INTEGER | read-only | Indicates whether or not the bus port supports isochronous transfers. |
| INT portMaximumWidth | 1.3.6.1.4.1.795.2.12.5.1.1.7 | INTEGER | read-only | The maximum width, in bits, of this Bus Port's data path. A value of 1 should be used for serial. |
| INT portMaximumTransferRate | 1.3.6.1.4.1.795.2.12.5.1.1.8 | INTEGER | read-only | The theoretical maximum transfer rate, in millions of bytes per second, that this Bus Port is capable of achieving under ideal conditions. A value of zero should be used if the transfer rate is less than 1 million bytes per second. |
| INT portMaximumAttachments | 1.3.6.1.4.1.795.2.12.5.1.1.9 | INTEGER | read-only | The maximum number of directly addressable entities supported by this bus port's protocol. |
| INT portConnectorType | 1.3.6.1.4.1.795.2.12.5.1.1.10 | INTEGER | read-only | Describes how options (cards, devices, etc.) physically connect to this port bus. If 'Other' is used, then the connector type description attribute shall be used. |
| STR portConnectorTypeDescription | 1.3.6.1.4.1.795.2.12.5.1.1.11 | DisplayString | read-only | Additional description of the connector described above. |
| INT portConnectorGender | 1.3.6.1.4.1.795.2.12.5.1.1.12 | INTEGER | read-only | Indicates the gender of the connector described above. |
| aggregatePhysicalExtent | 1.3.6.1.4.1.795.2.12.6 | |||
| aggregatePExtentTable | 1.3.6.1.4.1.795.2.12.6.1 | not-accessible | A list of aggregate physical extent entries. | |
| aggregatePExtentEntry | 1.3.6.1.4.1.795.2.12.6.1.1 | not-accessible | An aggregate P Extent entry. | |
| INT aggPExtentIndex | 1.3.6.1.4.1.795.2.12.6.1.1.1 | INTEGER | read-only | A unique index value for each aggregate physical extent beginning with 1. |
| INT aggPExtentBlocks | 1.3.6.1.4.1.795.2.12.6.1.1.2 | INTEGER | read-only | The total number of consecutive blocks (including check data blocks) contained in the aggregate p extent. The block size is determined by the storage device associated with this aggregate p extent. Note: If no redundancy group is associated with an aggregate p extent, then this number indicates that the p extent is available. |
| INT aggPExtentCheckDataBlocks | 1.3.6.1.4.1.795.2.12.6.1.1.3 | INTEGER | read-only | The number of blocks contained in the aggregate p extent to be used as check data. If the aggregate p extent is available, then this value shall be zero. |
| aggregateProtectedSpace | 1.3.6.1.4.1.795.2.12.7 | |||
| aggregatePsExtentTable | 1.3.6.1.4.1.795.2.12.7.1 | not-accessible | A list of aggregate protected space extents. | |
| aggregatePsExtentEntry | 1.3.6.1.4.1.795.2.12.7.1.1 | not-accessible | An aggregate Ps extent entry. | |
| INT aggPsExtentIndex | 1.3.6.1.4.1.795.2.12.7.1.1.1 | INTEGER | read-only | A unique index value for each aggregate ps extent beginning with 1. |
| INT aggPsExtentBlocks | 1.3.6.1.4.1.795.2.12.7.1.1.2 | INTEGER | read-only | The total number of user data blocks that is both located on a single storage device and part or all of a single volume set. The block size is determined by the storage device associated with this aggregate protected space extent. Note: if no volume set is associated with an aggregate protected space extent, then this number indicates the number of blocks that are available. |
| volumeSet | 1.3.6.1.4.1.795.2.12.8 | |||
| volumeSetTable | 1.3.6.1.4.1.795.2.12.8.1 | not-accessible | A list of volume sets. | |
| volumeSetEntry | 1.3.6.1.4.1.795.2.12.8.1.1 | not-accessible | A volume set entry. | |
| INT volIndex | 1.3.6.1.4.1.795.2.12.8.1.1.1 | INTEGER | read-only | A unique index value for each volume set beginning with 1. |
| STR volName | 1.3.6.1.4.1.795.2.12.8.1.1.2 | DisplayString | read-only | The name of the volume set. |
| INT volCapacity | 1.3.6.1.4.1.795.2.12.8.1.1.3 | INTEGER | read-only | The total size in Kbytes of the user data space of this volume set. |
| INT volPSExtentStripeLength | 1.3.6.1.4.1.795.2.12.8.1.1.4 | INTEGER | read-only | The number of ps_extents which form a user data stripe. This value shall be zero except when the ps_extent group is used. |
| INT volPSExtentInterleaveDepth | 1.3.6.1.4.1.795.2.12.8.1.1.5 | INTEGER | read-only | The number of ps_extents to stripe as a collective set. This value shall be zero except when the ps_extent group is used. |
| redundancyGroup | 1.3.6.1.4.1.795.2.12.9 | |||
| redundancyGroupTable | 1.3.6.1.4.1.795.2.12.9.1 | not-accessible | A list of redundancy groups. | |
| redundancyGroupEntry | 1.3.6.1.4.1.795.2.12.9.1.1 | not-accessible | A redundancy group entry. | |
| INT redundancyIndex | 1.3.6.1.4.1.795.2.12.9.1.1.1 | INTEGER | read-only | A unique index value for each redundancy group beginning with 1. |
| INT redundancyType | 1.3.6.1.4.1.795.2.12.9.1.1.2 | INTEGER | read-only | This field specifies the type of redundancy formed. |
| worldWideIds | 1.3.6.1.4.1.795.2.12.10 | |||
| worldWideIdTable | 1.3.6.1.4.1.795.2.12.10.1 | not-accessible | A list of worldWideIds. | |
| worldWideIdEntry | 1.3.6.1.4.1.795.2.12.10.1.1 | not-accessible | An worldWideId entry. | |
| INT worldWideIdIndex | 1.3.6.1.4.1.795.2.12.10.1.1.1 | INTEGER | read-only | A unique index value for each WorldWideID beginning with 1. |
| INT worldWideIdType | 1.3.6.1.4.1.795.2.12.10.1.1.2 | INTEGER | read-only | The type of identifier displayed by the Worldwide Identifier attribute. |
| STR worldWideId | 1.3.6.1.4.1.795.2.12.10.1.1.3 | DisplayString | read-only | The Worldwide Identifier for this entity. |
| associations | 1.3.6.1.4.1.795.2.12.11 | |||
| associationTable | 1.3.6.1.4.1.795.2.12.11.1 | not-accessible | A list of associations. | |
| associationEntry | 1.3.6.1.4.1.795.2.12.11.1.1 | not-accessible | An association entry. | |
| INT associationIndex | 1.3.6.1.4.1.795.2.12.11.1.1.1 | INTEGER | read-only | A unique index value for each association beginning with 1. |
| STR associationType | 1.3.6.1.4.1.795.2.12.11.1.1.2 | DisplayString | read-only | This field specifies the type of the association. It contains one of the following values: 'Physical Organization', 'Logical Organization', 'Logical to Physical Organization', 'Redundancy Organization', 'Spare Organization', 'Cache', 'FRU', 'Operational State', 'Statistical', 'SubComponent Software', or 'Worldwide Identifier'. |
| OID associationObject1 | 1.3.6.1.4.1.795.2.12.11.1.1.3 | OBJECT IDENTIFIER | read-only | The authoritative identifier for the first object referenced. |
| OID associationObject2 | 1.3.6.1.4.1.795.2.12.11.1.1.4 | OBJECT IDENTIFIER | read-only | The authoritative identifier for the second object referenced. |
| busPortAssociations | 1.3.6.1.4.1.795.2.12.12 | |||
| busPortAssociationTable | 1.3.6.1.4.1.795.2.12.12.1 | not-accessible | A list of bus port associations. | |
| busPortAssociationEntry | 1.3.6.1.4.1.795.2.12.12.1.1 | not-accessible | A bus port association entry. | |
| INT busPortAssociationIndex | 1.3.6.1.4.1.795.2.12.12.1.1.1 | INTEGER | read-only | An unique index for each bus port association. This index matches an index in the association table for which bus port association information is available. |
| INT busPortAssociationNegotiatedSpeed | 1.3.6.1.4.1.795.2.12.12.1.1.2 | INTEGER | read-only | The maximum burst transfer rate, in millions of bytes, which was negotiated between the two associated bus ports. |
| INT busPortAssociationNegotiatedWidth | 1.3.6.1.4.1.795.2.12.12.1.1.3 | INTEGER | read-only | The width, in bits, of the bus ports' data path which was negotiated between the two associated bus ports. |
| componentSpareAssociations | 1.3.6.1.4.1.795.2.12.13 | |||
| componentSpareAssociationTable | 1.3.6.1.4.1.795.2.12.13.1 | not-accessible | A list of component spare associations. | |
| componentSpareAssociationEntry | 1.3.6.1.4.1.795.2.12.13.1.1 | not-accessible | A component spare association entry. | |
| INT componentSpareAssociationIndex | 1.3.6.1.4.1.795.2.12.13.1.1.1 | INTEGER | read-only | An unique index for each component spare association. This index matches an index in the association table for which component spare association information is available. |
| INT componentSpareFunctioningState | 1.3.6.1.4.1.795.2.12.13.1.1.2 | INTEGER | read-only | The functioning state of the spares. |
| overallObjectStatus | 1.3.6.1.4.1.795.2.12.14 | |||
| INT overallStatus | 1.3.6.1.4.1.795.2.12.14.1 | INTEGER | read-only | The overall status of objects in the CIO MIB. Will be set to the worst status of any individual object. |
| operationalStates | 1.3.6.1.4.1.795.2.12.15 | |||
| operationalStateTable | 1.3.6.1.4.1.795.2.12.15.1 | not-accessible | A list of operational state information. | |
| operationalStateEntry | 1.3.6.1.4.1.795.2.12.15.1.1 | not-accessible | An operational state entry. | |
| INT operationalStateIndex | 1.3.6.1.4.1.795.2.12.15.1.1.1 | INTEGER | read-only | A unique index value for each operational state table entry beginning with 1. |
| INT operationalDeviceGroupIndex | 1.3.6.1.4.1.795.2.12.15.1.1.2 | INTEGER | read-only | This field present for DMI compatibility - unused in SNMP, always 0. |
| INT operationalStatus | 1.3.6.1.4.1.795.2.12.15.1.1.3 | INTEGER | read-only | The operational status of the object. |
| INT operationalUsageState | 1.3.6.1.4.1.795.2.12.15.1.1.4 | INTEGER | read-only | The usage state of the object. |
| INT operationalAvailabilityStatus | 1.3.6.1.4.1.795.2.12.15.1.1.5 | INTEGER | read-only | The availability of the object. |
| INT operationalAdministrativeStatus | 1.3.6.1.4.1.795.2.12.15.1.1.6 | INTEGER | read-only | The administrative state of the object. |
| INT operationalFatalErrorCount | 1.3.6.1.4.1.795.2.12.15.1.1.7 | INTEGER | read-only | The accumulated Fatal or Non-recoverable error count for the object. |
| INT operationalMajorErrorCount | 1.3.6.1.4.1.795.2.12.15.1.1.8 | INTEGER | read-only | The accumulated Major or Critical error count for the object. |
| INT operationalWarningErrorCount | 1.3.6.1.4.1.795.2.12.15.1.1.9 | INTEGER | read-only | The accumulated Warning or Non-critical error count for the object. |
| INT operationalCurrentErrorStatus | 1.3.6.1.4.1.795.2.12.15.1.1.10 | INTEGER | read-only | This attribute presents the current error status for the object. The most critical error status in effect should be presented. I.e. if a part of the object is 'Critical', while other status is 'Non-critical' then the status 'Critical' should be reported. |
| INT operationalPredictedFailureStatus | 1.3.6.1.4.1.795.2.12.15.1.1.11 | INTEGER | read-only | Enumeration describing the current Device Predicted Failure Status (e.g.: the S.M.A.R.T. status of the object). |
| statistics | 1.3.6.1.4.1.795.2.12.16 | |||
| statisticsTable | 1.3.6.1.4.1.795.2.12.16.1 | not-accessible | A list of statistics. | |
| statisticsEntry | 1.3.6.1.4.1.795.2.12.16.1.1 | not-accessible | A statistics entry. | |
| INT statisticsIndex | 1.3.6.1.4.1.795.2.12.16.1.1.1 | INTEGER | read-only | A unique index value for each statistics table entry beginning with 1. |
| INT statisticsBlocksRead | 1.3.6.1.4.1.795.2.12.16.1.1.2 | INTEGER | read-only | The number of 512 byte blocks read from the object. |
| INT statisticsBlocksWritten | 1.3.6.1.4.1.795.2.12.16.1.1.3 | INTEGER | read-only | The number of 512 byte blocks written to the object. |
| INT statisticsReadCommands | 1.3.6.1.4.1.795.2.12.16.1.1.4 | INTEGER | read-only | The number of read commands issued for the object. |
| INT statisticsWriteCommands | 1.3.6.1.4.1.795.2.12.16.1.1.5 | INTEGER | read-only | The number of write commands issued for the object. |
| INT statisticsReadBucket0 | 1.3.6.1.4.1.795.2.12.16.1.1.6 | INTEGER | read-only | The number of read commands issued, size < 512 bytes. |
| INT statisticsReadBucket1 | 1.3.6.1.4.1.795.2.12.16.1.1.7 | INTEGER | read-only | The number of read commands issued, 512 bytes <= size < 1K bytes. |
| INT statisticsReadBucket2 | 1.3.6.1.4.1.795.2.12.16.1.1.8 | INTEGER | read-only | The number of read commands issued, 1K bytes <= size < 2K bytes. |
| INT statisticsReadBucket3 | 1.3.6.1.4.1.795.2.12.16.1.1.9 | INTEGER | read-only | The number of read commands issued, 2K bytes <= size < 4K bytes. |
| INT statisticsReadBucket4 | 1.3.6.1.4.1.795.2.12.16.1.1.10 | INTEGER | read-only | The number of read commands issued, 4K bytes <= size < 8K bytes. |
| INT statisticsReadBucket5 | 1.3.6.1.4.1.795.2.12.16.1.1.11 | INTEGER | read-only | The number of read commands issued, 8K bytes <= size < 16K bytes. |
| INT statisticsReadBucket6 | 1.3.6.1.4.1.795.2.12.16.1.1.12 | INTEGER | read-only | The number of read commands issued, 16K bytes <= size < 32K bytes. |
| INT statisticsReadBucket7 | 1.3.6.1.4.1.795.2.12.16.1.1.13 | INTEGER | read-only | The number of read commands issued, 32K bytes <= size < 64K bytes. |
| INT statisticsReadBucket8 | 1.3.6.1.4.1.795.2.12.16.1.1.14 | INTEGER | read-only | The number of read commands issued, 64K bytes <= size < 128K bytes. |
| INT statisticsReadBucket9 | 1.3.6.1.4.1.795.2.12.16.1.1.15 | INTEGER | read-only | The number of read commands issued, 128K bytes <= size < 256K bytes. |
| INT statisticsReadBucket10 | 1.3.6.1.4.1.795.2.12.16.1.1.16 | INTEGER | read-only | The number of read commands issued, 256K bytes <= size < 512K bytes. |
| INT statisticsReadBucket11 | 1.3.6.1.4.1.795.2.12.16.1.1.17 | INTEGER | read-only | The number of read commands issued, 512K bytes <= size < 1M bytes. |
| INT statisticsReadBucket12 | 1.3.6.1.4.1.795.2.12.16.1.1.18 | INTEGER | read-only | The number of read commands issued, size >= 1M bytes. |
| INT statisticsWriteBucket0 | 1.3.6.1.4.1.795.2.12.16.1.1.19 | INTEGER | read-only | The number of write commands issued, size < 512 bytes. |
| INT statisticsWriteBucket1 | 1.3.6.1.4.1.795.2.12.16.1.1.20 | INTEGER | read-only | The number of write commands issued, 512 bytes <= size < 1K bytes. |
| INT statisticsWriteBucket2 | 1.3.6.1.4.1.795.2.12.16.1.1.21 | INTEGER | read-only | The number of write commands issued, 1K bytes <= size < 2K bytes. |
| INT statisticsWriteBucket3 | 1.3.6.1.4.1.795.2.12.16.1.1.22 | INTEGER | read-only | The number of write commands issued, 2K bytes <= size < 4K bytes. |
| INT statisticsWriteBucket4 | 1.3.6.1.4.1.795.2.12.16.1.1.23 | INTEGER | read-only | The number of write commands issued, 4K bytes <= size < 8K bytes. |
| INT statisticsWriteBucket5 | 1.3.6.1.4.1.795.2.12.16.1.1.24 | INTEGER | read-only | The number of write commands issued, 8K bytes <= size < 16K bytes. |
| INT statisticsWriteBucket6 | 1.3.6.1.4.1.795.2.12.16.1.1.25 | INTEGER | read-only | The number of write commands issued, 16K bytes <= size < 32K bytes. |
| INT statisticsWriteBucket7 | 1.3.6.1.4.1.795.2.12.16.1.1.26 | INTEGER | read-only | The number of write commands issued, 32K bytes <= size < 64K bytes. |
| INT statisticsWriteBucket8 | 1.3.6.1.4.1.795.2.12.16.1.1.27 | INTEGER | read-only | The number of write commands issued, 64K bytes <= size < 128K bytes. |
| INT statisticsWriteBucket9 | 1.3.6.1.4.1.795.2.12.16.1.1.28 | INTEGER | read-only | The number of write commands issued, 128K bytes <= size < 256K bytes. |
| INT statisticsWriteBucket10 | 1.3.6.1.4.1.795.2.12.16.1.1.29 | INTEGER | read-only | The number of write commands issued, 256K bytes <= size < 512K bytes. |
| INT statisticsWriteBucket11 | 1.3.6.1.4.1.795.2.12.16.1.1.30 | INTEGER | read-only | The number of write commands issued, 512K bytes <= size < 1M bytes. |
| INT statisticsWriteBucket12 | 1.3.6.1.4.1.795.2.12.16.1.1.31 | INTEGER | read-only | The number of write commands issued, size >= 1M bytes. |
| trapLogCount | 1.3.6.1.4.1.795.2.12.17 | |||
| INT trapLogNumEntries | 1.3.6.1.4.1.795.2.12.17.1 | INTEGER | read-only | The number entries in the Trap Log. |
| trapLog | 1.3.6.1.4.1.795.2.12.18 | |||
| trapLogTable | 1.3.6.1.4.1.795.2.12.18.1 | not-accessible | A circular list of trap log entries. The number of entries is given by the value of trapLogCount. Current maximum trap log count is fixed at 125, but should be programmable (via MIB variable and .INI file) in the future. | |
| trapLogEntry | 1.3.6.1.4.1.795.2.12.18.1.1 | not-accessible | A trap log entry. | |
| INT trapLogIndex | 1.3.6.1.4.1.795.2.12.18.1.1.1 | INTEGER | read-only | A unique index value for each trap log table entry beginning with 1. |
| STR trapLogString | 1.3.6.1.4.1.795.2.12.18.1.1.2 | DisplayString | read-only | A textual string containing the text of the last trap. |
| INT trapLogTimeStamp | 1.3.6.1.4.1.795.2.12.18.1.1.3 | INTEGER | read-only | The number of seconds which have elapsed between powerup and the trap occurrence. |
| cycTraps | 1.3.6.1.4.1.795.2.12.9000 | |||
| INT cycSeverity | 1.3.6.1.4.1.795.2.12.9000.9001 | INTEGER | not-accessible | Severity level of the trap. |
| OID cycObject | 1.3.6.1.4.1.795.2.12.9000.9002 | OBJECT IDENTIFIER | not-accessible | The object identifier of the object referred to by the trap. |
| INT cycPhysicalObjectState | 1.3.6.1.4.1.795.2.12.9000.9003 | INTEGER | not-accessible | New state for the object referred to by the trap. |
| INT cycVolumeSetState | 1.3.6.1.4.1.795.2.12.9000.9004 | INTEGER | not-accessible | New state for the object referred to by the trap. |
| INT cycVolumeSetActivity | 1.3.6.1.4.1.795.2.12.9000.9005 | INTEGER | not-accessible | New activity for the object referred to by the trap. |
| INT cycVolumeSetActivityState | 1.3.6.1.4.1.795.2.12.9000.9006 | INTEGER | not-accessible | Status of a new activity for the object referred to by the trap. |
| INT cycSpareState | 1.3.6.1.4.1.795.2.12.9000.9007 | INTEGER | not-accessible | New state for the object referred to by the trap. |
| INT cycEnclosureComponent | 1.3.6.1.4.1.795.2.12.9000.9008 | INTEGER | not-accessible | The part of the enclosure affected by this trap. |
| INT cycEnclosureComponentNumber | 1.3.6.1.4.1.795.2.12.9000.9009 | INTEGER | not-accessible | The ordinal number of the part of the enclosure affected by this trap. Numbers ordinarily start at 1, such as Fan 1. A number of 0 refers to all such parts as a single piece. For example, Fan 0 refers to all fans. |
| INT cycEnclosureComponentState | 1.3.6.1.4.1.795.2.12.9000.9010 | INTEGER | not-accessible | Description of the change in status in the affected enclosure part. |
RFC description
Storage device status and SMART event monitoring for Adaptec I/O managers.
Start monitoring Adaptec storage management agent hosts (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.