| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoIPIfMIB | 1.3.6.1.4.1.9.9.309 | | | The MIB module for configuring IP characteristics
of the interfaces of a device. |
| ciscoIPIfMIBNotifs | 1.3.6.1.4.1.9.9.309.0 | | | |
| ciiIPIfNotifications | 1.3.6.1.4.1.9.9.309.0.0 | | | |
| ciscoIPIfMIBObjects | 1.3.6.1.4.1.9.9.309.1 | | | |
| ciiIPAddressConfiguration | 1.3.6.1.4.1.9.9.309.1.1 | | | |
| BIT ciiIPAddressCategoryCap | 1.3.6.1.4.1.9.9.309.1.1.1 | Bits | read-only | This object indicates what types of IP address category can
be configured on this device.
single(0) means that each interface on the device can be
assigned only one IP address.
primary(1) means that each interface on the device can be
assigned an IP address as the primary one.
secondary(2) means that each interface on the device can be
assigned an IP address as the secondary one.
Devices which has the single(0) bit set to 1, should have
the primary(1) and secondary(2) bits set to 0.
Likewise devices which have the primary(1) and/or
secondary(2) bits set to 1, should have the single(0)
set to 0. |
| ciiIPAddressTable | 1.3.6.1.4.1.9.9.309.1.1.2 | | not-accessible | The table of addressing information relevant to
this entity's IP addresses. This is the enhancement of
the ipAddrTable in IP-MIB. |
| ciiIPAddressEntry | 1.3.6.1.4.1.9.9.309.1.1.2.1 | | not-accessible | The addressing information for one of this
entity's IP addresses.
The only way an entry can be created is by setting the
ciiIPAddressStatus object to 'create and go' and the
only way an entry can be destroyed is by setting the
ciiIPAddressStatus object to 'destroy'.
Any column in the entry may be modified anytime,
when the value of ciiIPAddressStatus is 'active'. |
| IPt ciiIPAddressType | 1.3.6.1.4.1.9.9.309.1.1.2.1.1 | InetAddressType | not-accessible | The type of Internet address for all the objects with SYNTAX
InetAddress and InetAddressPrefixLength in this entry. |
| IP ciiIPAddress | 1.3.6.1.4.1.9.9.309.1.1.2.1.2 | InetAddress | not-accessible | The IP address to which this entry's addressing
information pertains. |
| NUM ciiIPAddressIfIndex | 1.3.6.1.4.1.9.9.309.1.1.2.1.3 | InterfaceIndex | read-create | The index value which uniquely identifies the
interface to which this entry is applicable.
ciiIPAddressIfIndex is the same as the ifIndex of the
interface associated with this ciiIPAddressEntry. |
| ADR ciiIPAddressPrefixLength | 1.3.6.1.4.1.9.9.309.1.1.2.1.4 | InetAddressPrefixLength | read-create | The length of the prefix associated with the IP address
of this entry.
A value of zero causes all addresses to match.
The type of address is specified by ciiIPAddressType of
this entry. |
| IP ciiIPAddressBroadcast | 1.3.6.1.4.1.9.9.309.1.1.2.1.5 | InetAddress | read-create | The broadcast address associated with the
IP address of this entry.
The type of address is specified by ciiIPAddressType of
this entry. |
| ADR ciiIPAddressCategory | 1.3.6.1.4.1.9.9.309.1.1.2.1.6 | IpAddressCatagory | read-create | Indicates the IP address category of this entry.
Setting of this object has to comply with the value of
ciiIPAddressCategoryCap. |
| ROW ciiIPAddressStatus | 1.3.6.1.4.1.9.9.309.1.1.2.1.7 | RowStatus | read-create | This object is used to manage creation and deletion of rows
in this table.
ciiIPAddressStatus must be set to 'creatAndGo' to create
an entry and set to 'destroy' to delete an entry.
The value in any column may be modified any time even the
value of this entry rowStatus object is 'active'.
Caution has to be taken before destroying any entry.
Example: Need to change the IP address of an interface,
which provides sole network connectivity.
This has to be done by destroying the entry and creating
a new one. The device would loose network connectivity
after the entry is destroyed. In this case, the destroy
of the old entry and the creation on the new entry
should be packed in the same PDU. |
| ciiIPIfAddressTable | 1.3.6.1.4.1.9.9.309.1.1.3 | | not-accessible | The table of addressing information relevant to
this entity's IP addresses. This is the enhancement of
the ipAddrTable in IP-MIB.
This table is same as ciiIPAddressTable accept
that ciiIPIfAddressIfIndex is part of the INDEX
clause.
This table is used to configure an IP address on a
interface identified by ifIndex. Each interface can be
configured with multiple IP addresses.
When requested to create/delete an entry in this
table, the agent also creates/deletes a
correspondng entry in the ipAddrTable of rfc2011.
Entries in this table are created/deleted only by
network managers. Agents will typically only allow
entries to be created on a subset of ifIndex values. |
| ciiIPIfAddressEntry | 1.3.6.1.4.1.9.9.309.1.1.3.1 | | not-accessible | The addressing information for one of this
entity's IP addresses.
The only way an entry can be created is by setting the
ciiIPIfAddressStatus object to 'create and go' and the
only way an entry can be destroyed is by setting the
ciiIPIfAddressStatus object to 'destroy'.
Any column in the entry may be modified anytime,
when the value of ciiIPIfAddressStatus is 'active'. |
| ADR ciiIPIfAddressPrefixLength | 1.3.6.1.4.1.9.9.309.1.1.3.1.1 | InetAddressPrefixLength | read-create | The length of the prefix associated with the IP address
of this entry.
A value of zero causes all addresses to match.
The type of address is specified by ciiIPAddressType of
this entry.
This object is same as the ciiIPAddressPrefixLength
object, and changes to one will affect the other. |
| IP ciiIPIfAddressBroadcast | 1.3.6.1.4.1.9.9.309.1.1.3.1.2 | InetAddress | read-create | The broadcast address associated with the
IP address of this entry.
The type of address is specified by ciiIPAddressType of
this entry.
This object is same as the ciiIPAddressBroadcast
object, and changes to one will affect the other. |
| ADR ciiIPIfAddressCategory | 1.3.6.1.4.1.9.9.309.1.1.3.1.3 | IpAddressCatagory | read-create | Indicates the IP address category of this entry.
Setting of this object has to comply with the value of
ciiIPAddressCategoryCap.
This object is same as the ciiIPAddressCategory
object, and changes to one will affect the other. |
| ROW ciiIPIfAddressStatus | 1.3.6.1.4.1.9.9.309.1.1.3.1.4 | RowStatus | read-create | This object is used to manage creation and deletion of rows
in this table.
ciiIPAddressStatus must be set to 'creatAndGo' to create
an entry and set to 'destroy' to delete an entry.
The value in any column may be modified any time even the
value of this entry rowStatus object is 'active'.
Caution has to be taken before destroying any entry.
Example: Need to change the IP address of an interface,
which provides sole network connectivity.
This has to be done by destroying the entry and creating
a new one. The device would loose network connectivity
after the entry is destroyed. In this case, the destroy
of the old entry and the creation on the new entry
should be packed in the same PDU. |
| ciiHelperAddressConfiguration | 1.3.6.1.4.1.9.9.309.1.2 | | | |
| ciiHelperAddressTable | 1.3.6.1.4.1.9.9.309.1.2.1 | | not-accessible | This table lists the IP helper addresses associated with each
interface. |
| ciiHelperAddressEntry | 1.3.6.1.4.1.9.9.309.1.2.1.1 | | not-accessible | An entry describes a single IP helper address associated with
the corresponding interface, identified by the ifIndex-value
assigned to the interface.
A peer SNMP entity may associate a helper address with an
interface by setting an instance of ciiHelperAddressStatus to
'createAndWait' or 'createAndGo'. Observe that an
implementation that does not support these options must specify
these limitations in an agent capabilities statement.
Other management entities (e.g., the local console) may
associate a helper address with an interface. In these cases,
the system must automatically create a row in the
ciiHelperAddressTable.
A peer SNMP entity may disassociate a helper address from an
interface by setting the corresponding instance of
ciiHelperAddressStatus to 'destroy'. Observe an implementation
that does not support this option must specify this limitation
in an agent capabilities statement.
Other management entities may disassociate a helper address
from an interface. In these cases, the system must
automatically destroy the corresponding row in the
ciiHelperAddressTable.
The system automatically destroys a row when the system destroys
the corresponding interface in the ifTable. |
| STR ciiHelperAddressVrf | 1.3.6.1.4.1.9.9.309.1.2.1.1.1 | SnmpAdminString | not-accessible | This object indicates the name assigned to the Virtual Routing
and Forwarding (VRF) instance in which the IP helper address
resides. |
| IPt ciiHelperAddressType | 1.3.6.1.4.1.9.9.309.1.2.1.1.2 | InetAddressType | not-accessible | This object indicates the type of IP address indicated by the
corresponding instance of ciiHelperAddress. |
| IP ciiHelperAddress | 1.3.6.1.4.1.9.9.309.1.2.1.1.3 | InetAddress | not-accessible | This object indicates the IP helper address. |
| ROW ciiHelperAddressStatus | 1.3.6.1.4.1.9.9.309.1.2.1.1.4 | RowStatus | read-create | This object specifies the status of the row. The following
columns must be valid before activing the row:
- ciiHelperAddressStorage
An implementation must not allow an EMS/NMS to modify any
column once the row has been activated. |
| STO ciiHelperAddressStorage | 1.3.6.1.4.1.9.9.309.1.2.1.1.5 | StorageType | read-create | This object specifies the memory realization of the row. |
| ciscoIPIfMIBConform | 1.3.6.1.4.1.9.9.309.2 | | | |
| ciscoIPIfMIBCompliances | 1.3.6.1.4.1.9.9.309.2.1 | | | |
| ciscoIPIfMIBCompliance | 1.3.6.1.4.1.9.9.309.2.1.1 | | | The compliance statement for the CISCO-IP-IF-MIB.
OBJECT ciiIPAddressType
SYNTAX INTEGER { ipv4(1) }
DESCRIPTION
An implementation is only required to support IPv4
addresses.
OBJECT ciiIPAddress
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
An implementation is only required to support IPv4
addresses. |
| ciscoIPIfMIBCompliance1 | 1.3.6.1.4.1.9.9.309.2.1.2 | | | The compliance statement for the CISCO-IP-IF-MIB.
OBJECT ciiIPAddressType
SYNTAX INTEGER { ipv4(1) }
DESCRIPTION
An implementation is only required to support IPv4
addresses.
OBJECT ciiIPAddress
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
An implementation is only required to support IPv4
addresses. |
| ciscoIPIfMIBCompliance2 | 1.3.6.1.4.1.9.9.309.2.1.3 | | | The compliance statement for the CISCO-IP-IF-MIB.
OBJECT ciiIPAddressType
SYNTAX INTEGER { ipv4(1) }
DESCRIPTION
An implementation is only required to support IPv4
addresses.
OBJECT ciiIPAddress
SYNTAX InetAddress (SIZE(4))
DESCRIPTION
An implementation is only required to support IPv4
addresses. |
| ciscoIPIfMIBGroups | 1.3.6.1.4.1.9.9.309.2.2 | | | |
| ciscoIPIfAddressConfigurationGroup1 | 1.3.6.1.4.1.9.9.309.2.2.1 | | | A collection of objects for the address configuration
of interfaces. |
| ciscoIPIfAddressConfigurationGroup2 | 1.3.6.1.4.1.9.9.309.2.2.2 | | | A collection of objects for the broadcast address
configuration of interfaces. |
| ciscoIPIfAddressConfigurationGroup3 | 1.3.6.1.4.1.9.9.309.2.2.3 | | | A collection of objects for the address configuration
of interfaces. |
| ciscoIPIfAddressConfigurationGroup4 | 1.3.6.1.4.1.9.9.309.2.2.4 | | | A collection of objects for the broadcast address
configuration of interfaces. |
| ciiHelperAddressGroup | 1.3.6.1.4.1.9.9.309.2.2.5 | | | A collection of objects describing IP helper addresses
associated with interfaces. |
