| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoLagMIB | 1.3.6.1.4.1.9.9.225 | | | Cisco Link Aggregation module for managing IEEE Std
802.3ad.
This MIB provides Link Aggregation information that are
either excluded by IEEE Std 802.3ad (IEEE8023-LAG-MIB)
or specific to Cisco products. |
| clagMIBObjects | 1.3.6.1.4.1.9.9.225.1 | | | |
| clagGlobalConfigObjects | 1.3.6.1.4.1.9.9.225.1.1 | | | |
| CLA clagAggDistributionProtocol | 1.3.6.1.4.1.9.9.225.1.1.1 | ClagDistributionProtocol | read-write | This object controls the load balancing algorithms
used on this port channel interface to distribute outgoing
data frames among its component interfaces. |
| ADR clagAggDistributionAddressMode | 1.3.6.1.4.1.9.9.225.1.1.2 | ClagDistributionAddressMode | read-write | The load balancing address mode for the device. |
| CLA clagAggDistributionMplsProtocol | 1.3.6.1.4.1.9.9.225.1.1.3 | ClagDistributionMplsProtocol | read-write | This object controls the load balancing algorithms
used on this port channel interface to distribute
outgoing MPLS data frames among its component interfaces.
This object is only instantiated on platforms which
support aggregation load balancing for MPLS packets. |
| U32 clagAggMaxAggregators | 1.3.6.1.4.1.9.9.225.1.1.4 | Unsigned32 | read-only | This object indicates the maximum number of aggregators
supported by the device. |
| INT clagAggHashDistMethodGlobalConfig | 1.3.6.1.4.1.9.9.225.1.1.5 | INTEGER | read-write | Specifies the global configuration for hash
distribution method applied on a port channel
interface among its channel members.
adaptive(1) : Adaptive hash distribution for the bundle
among port channel members.
fixed(2) : Fixed hash distribution for the bundle
among port channel members. |
| clagAgg | 1.3.6.1.4.1.9.9.225.1.2 | | | |
| clagAggProtocolTable | 1.3.6.1.4.1.9.9.225.1.2.1 | | not-accessible | A table that contains protocol information about every
interface which supports link aggregation. |
| clagAggProtocolEntry | 1.3.6.1.4.1.9.9.225.1.2.1.1 | | not-accessible | Entry containing aggregation protocol type for a
particular interface. An entry is created in this
table when its associated ifEntry is created and that
interface supports link aggregation. The entry of this
table is deleted when the associated ifEntry is removed. |
| CLA clagAggProtocolType | 1.3.6.1.4.1.9.9.225.1.2.1.1.1 | ClagAggregationProtocol | read-write | The aggregation protocol type for the interface.
On some platforms, aggregation protocol may be assigned per
group. The group can be a collection of the ports which belong
to a module or system. If the aggregation protocol is assigned
to any of the ports in such group then the aggregation protocol
will apply to all ports in the same group.
On some platforms, aggregation protocol type can be assigned
per aggregator. If multiple ports belong to a aggregator,
the aggregation protocol assigned to any of the ports in such
aggregator will apply to all ports in the same. |
| clagAggPort | 1.3.6.1.4.1.9.9.225.1.3 | | | |
| clagAggPortTable | 1.3.6.1.4.1.9.9.225.1.3.1 | | not-accessible | A table that contains information about every
aggregation port that is associated with this system.
This table contains additional objects for the
dot3adAggPortTable. |
| clagAggPortEntry | 1.3.6.1.4.1.9.9.225.1.3.1.1 | | not-accessible | An entry containing additional management information
applicable to a particular aggregation port. |
| CLA clagAggPortAdminStatus | 1.3.6.1.4.1.9.9.225.1.3.1.1.1 | ClagPortAdminStatus | read-write | The administrative status of the LACP protocol on this
aggregation port. |
| INT clagAggPortRate | 1.3.6.1.4.1.9.9.225.1.3.1.1.2 | INTEGER | read-write | Specifies the requested exchange rate of LACP packets
on this interface.
fast(1) : The device requests its peers to send LACP packets
at fast rate to this interface.
normal(2): The decice requests its peers to send LACP packets
at normal rate to this interface. |
| clagAggPortList | 1.3.6.1.4.1.9.9.225.1.4 | | | |
| clagAggPortListTable | 1.3.6.1.4.1.9.9.225.1.4.1 | | not-accessible | This table augments the dot3adAggPortListTable and
provides the complete list of ports associated with
each Aggregator. |
| clagAggPortListEntry | 1.3.6.1.4.1.9.9.225.1.4.1.1 | | not-accessible | A list of the ports associated with a given Aggregator. |
| OCT clagAggPortListPorts | 1.3.6.1.4.1.9.9.225.1.4.1.1.1 | OCTET STRING | read-only | This object contains a list of ports currently associated
with this Aggregator in the format of
'[number_of_ports][cieIfDot1dBaseMappingPort1][...]
[cieIfDot1dBaseMappingPortn]'
where
[number_of_ports] is of size 2 octet and indicates
the number of ports contains in this object. It
also indicates the number of cieIfDot1dBaseMappingPort field
following this field.
[cieIfDot1dBaseMappingPort'n'] is the value of
cieIfDot1dBaseMappingPort of the 'n' port associated with this
Aggregation and has size of 2 octets where n is up to
[number_of_ports]. |
| clagAggChannelIntf | 1.3.6.1.4.1.9.9.225.1.5 | | | |
| clagAggChannelIfTable | 1.3.6.1.4.1.9.9.225.1.5.1 | | not-accessible | A table providing port channel
configuration information for port channel
interfaces identified by ifIndex. |
| clagAggChannelIfEntry | 1.3.6.1.4.1.9.9.225.1.5.1.1 | | not-accessible | An entry containing port channel
configuration information for port
channel interfaces. |
| T/F clagAggChannelIfFastSwitchOver | 1.3.6.1.4.1.9.9.225.1.5.1.1.1 | TruthValue | read-write | Specifies whether LACP protocol fast switchover
mode is enabled on this port channel interface
or not. |
| U32 clagAggChannelIfMaxBundle | 1.3.6.1.4.1.9.9.225.1.5.1.1.2 | Unsigned32 | read-write | Specifies the maximum number of member
ports that can be bundled on this port
channel interface for LACP protocol. |
| U32 clagAggChannelIfMinLink | 1.3.6.1.4.1.9.9.225.1.5.1.1.3 | Unsigned32 | read-write | Specifies the minimum number of bundled member ports that are
needed in order for this port channel interface to be
operational.
A value of zero for this object indicates that no minimum
number of bundled member ports are required for this port
channel interface to be operational. |
| INT clagAggChannelIfHashDistAdminMethod | 1.3.6.1.4.1.9.9.225.1.5.1.1.4 | INTEGER | read-write | Specifies the hash distribution method that is administratively
configured on this port channel interface upon its channel
membership transition event.
none(1) : Hash distribution algorithm on this
port channel interface is not specifically
configured and global configuration of
clagAggHashDistMethodGlobalConfig will
be applied on this port channel interface.
adaptive(2) : Adaptive hash distribution for this port
channel interface among its channel members.
fixed(3) : Fixed hash distribution for this port channel
interface among its channel members. |
| INT clagAggChannelIfHashDistOperMethod | 1.3.6.1.4.1.9.9.225.1.5.1.1.5 | INTEGER | read-only | Specifies the operational hash distribution method
for this port channel interface among the port channel members.
other(1) : None of the following.
adaptive(2) : Adaptive hash distribution for the
port channel interface among its
channel members.
fixed(3) : Fixed hash distribution for the port
channel among channel members. |
| clagMIBNotifications | 1.3.6.1.4.1.9.9.225.2 | | | |
| clagMIBConformance | 1.3.6.1.4.1.9.9.225.3 | | | |
| clagMIBCompliances | 1.3.6.1.4.1.9.9.225.3.1 | | | |
| clagMIBCompliance | 1.3.6.1.4.1.9.9.225.3.1.1 | | | The compliance statement for entities which implement
the Cisco Link Aggregation MIB |
| clagMIBCompliance2 | 1.3.6.1.4.1.9.9.225.3.1.2 | | | The compliance statement for entities which implement
the Cisco Link Aggregation MIB |
| clagMIBCompliance3 | 1.3.6.1.4.1.9.9.225.3.1.3 | | | The compliance statement for entities which implement
the Cisco Link Aggregation MIB |
| clagMIBCompliance4 | 1.3.6.1.4.1.9.9.225.3.1.4 | | | The compliance statement for entities which implement
the Cisco Link Aggregation MIB |
| clagMIBCompliance5 | 1.3.6.1.4.1.9.9.225.3.1.5 | | | The compliance statement for entities which implement
the Cisco Link Aggregation MIB |
| clagMIBGroups | 1.3.6.1.4.1.9.9.225.3.2 | | | |
| clagAggProtocolGroup | 1.3.6.1.4.1.9.9.225.3.2.1 | | | The object that provide aggregation protocol type of an
interface. These are additional to the IEEE Std 802.3ad
MIB. |
| clagAggPortGroup | 1.3.6.1.4.1.9.9.225.3.2.2 | | | A collection of objects that provide admin status
about an aggregation port. These are additional to the
IEEE Std 802.3ad MIB. |
| clagAggDistributionGroup | 1.3.6.1.4.1.9.9.225.3.2.3 | | | A collection of objects that provide the load balancing
information for an aggregator. These are additional to
the IEEE Std 802.3ad MIB. |
| clagAggDistributionMplsGroup | 1.3.6.1.4.1.9.9.225.3.2.4 | | | A collection of objects that provide the load balancing
information for an aggregator for MPLS packets.
These are additional to the IEEE Std 802.3ad MIB. |
| clagAggPortListGroup | 1.3.6.1.4.1.9.9.225.3.2.5 | | | A collection of object that provides information about
ports in an aggregation. |
| clagAggMaxAggregatorsGroup | 1.3.6.1.4.1.9.9.225.3.2.6 | | | A collection of object that provides information about
the maximum number of aggregators supported by the
device. |
| clagAggRateGroup | 1.3.6.1.4.1.9.9.225.3.2.7 | | | A collection of object that provides information about
the rate at which LACP packets are ingressed on
interfaces. |
| clagAggChannelIfLacpGroup | 1.3.6.1.4.1.9.9.225.3.2.8 | | | A collection of objects that provides information about
the LACP protocol configurations for port channel
interfaces. |
| clagAggChannelIfHashDistMethodGroup | 1.3.6.1.4.1.9.9.225.3.2.9 | | | A collection of objects that provides information about
the port channel configurations of hash distribution
method on port channel interfaces. |
| clagAggHashDistGlobalGroup | 1.3.6.1.4.1.9.9.225.3.2.10 | | | A collection of object that provides information about global
configuration of hash distribution method on port channel
interface. |
| clagAggChannelIfMinLinkGroup | 1.3.6.1.4.1.9.9.225.3.2.11 | | | A collection of objects that provides information about
the minimum link configurations for port channel
interfaces. |
