CISCO-VISION-MIB

All MIBs › CISCO-VISION-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2021-04-07

Category: Cisco Devices

Description: Monitors Cisco Vision digital signage platform content delivery, display endpoint status, and media playback health.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-VISION-MIB?

CISCO-VISION-MIB reports operational status for Cisco Vision Director, a digital signage and video content-delivery platform built around Digital Media Players (DMPs) deployed at display endpoints such as stadiums, retail, and enterprise venues. It exposes endpoint hardware/software status such as whether the attached display (TV) is powered on, network interface counters (bytes/packets in and out, packet errors), and CPU utilization via ssCpuRawUser/ssCpuRawIdle, alongside precision-timing health via NTP and PTP (master, deviation, sync status) used to keep video playback synchronized across many screens. This makes it valuable for spotting failed displays, network-starved players, high CPU load on a DMP, or timing drift that would cause content to fall out of sync across a venue. It reuses the standard ssCpuRawUser/ssCpuRawIdle objects from the UCD-SNMP-MIB/HOST-RESOURCES family for CPU accounting rather than defining its own. It is typically deployed by AV/IT teams managing large fleets of digital signage endpoints in venues like stadiums, campuses, and retail chains. Network engineers evaluating or troubleshooting this functionality can download the CISCO-VISION-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-VISION-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Vision Digital Media Players (DMPs)
Cisco Vision Director digital signage endpoints

Monitoring Examples

An administrator would poll ciscoVisionDmpTvOnOff and ciscoVisionDmpPTPstatus across a fleet of DMPs to find screens that are powered off or have lost PTP sync, which would show up as visibly out-of-sync video walls. Checking ciscoVisionDmpBytesIn/BytesOut and ciscoVisionDmpPktErrCnt on the ciscoVisionDmpInterfaceDesc-identified interface would reveal a DMP suffering network packet loss, while ssCpuRawUser trending high would flag a player struggling to decode content. ciscoVisionDmpPTPDeviation quantifies how far a given player's clock has drifted from ciscoVisionDmpPTPMaster.

What Can Be Monitored

display power state
PTP/NTP time sync status and deviation
network interface throughput and errors
CPU utilization
packet error counts

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE

From SNMPv2-TC

DisplayString

How to Use in IPNetwork Monitor

Example using ciscoVisionDmpTvOnOff OID:

Select a Cisco Vision digital signage device as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ciscoVisionDmpTvOnOff into the Find box to locate it in the OID tree, then select it and click OK. This field represents the dmp Tv on Of status 0 : On 1 : Off -1 : Unknown. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an Integer32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline, since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoVisionMIB	1.3.6.1.4.1.9.9.1051			Cisco Vision MIB is to report the status of Cisco Vision Director.
ciscoVisionMIBNotifs	1.3.6.1.4.1.9.9.1051.0
NTF ciscoVdServiceStatusNotifs	1.3.6.1.4.1.9.9.1051.0.1			This is notification for service status
NTF ciscoVdBackupTaskNotifs	1.3.6.1.4.1.9.9.1051.0.2			This is notification for user backup
NTF ciscoVdNtpNotifs	1.3.6.1.4.1.9.9.1051.0.3			This is notification for NTP sync or unsync status
NTF ciscoVdHdmiUpDwnNotifs	1.3.6.1.4.1.9.9.1051.0.4			This is notification for DMP HDMI TV On/Off
ciscoVisionMIBConform	1.3.6.1.4.1.9.9.1051.1
ciscoVisionMIBCompliances	1.3.6.1.4.1.9.9.1051.1.1
ciscoVisionDsdMIBCompliance	1.3.6.1.4.1.9.9.1051.1.1.1			DSD Compliances group
ciscoVisionDmpMIBCompliance	1.3.6.1.4.1.9.9.1051.1.1.2			Please enter description here
ciscoVisionMIBGroups	1.3.6.1.4.1.9.9.1051.1.2
ciscoVisiondsdSvcGroup	1.3.6.1.4.1.9.9.1051.1.2.1			A collection of managed objects defining the service status of DSD. This is up/down status of each service in DSD
ciscoVisiondsdMIBNotifsGroup	1.3.6.1.4.1.9.9.1051.1.2.2			A collection of managed objects defining the notifications configured for DSD services.
ciscoVisiondsdDmpGroup	1.3.6.1.4.1.9.9.1051.1.2.3			A collection of managed objects defining the status of each DMP.
ciscoVisionDmpGroup	1.3.6.1.4.1.9.9.1051.1.2.4			A collection of managed objects defining the service status of DMP. This is up/down status of each service in dmp
ciscoVisionDsd	1.3.6.1.4.1.9.9.1051.2
ciscoVdService	1.3.6.1.4.1.9.9.1051.2.1
ciscoVdServiceTable	1.3.6.1.4.1.9.9.1051.2.1.1		not-accessible	This table consists of the status attribute of diffrent services inside DSD like config, control, monitor, localcontrol, broker, CMS and Menu.
ciscoVdServiceEntry	1.3.6.1.4.1.9.9.1051.2.1.1.1		not-accessible	A set of status attribute for each service in DSD. There exists an entry for each of the service of DSD
STR ciscoVdDsdServiceName	1.3.6.1.4.1.9.9.1051.2.1.1.1.1	DisplayString	not-accessible	Represents the name of one service within DSD
I32 ciscoVdDsdServiceStatus	1.3.6.1.4.1.9.9.1051.2.1.1.1.2	Integer32	read-only	The status of the each of the service in DSD. This status represents whether a service is running or is it down. 0 running 1 stopped -1 unknown
STR ciscoVdDsdServiceDesc	1.3.6.1.4.1.9.9.1051.2.1.1.1.3	DisplayString	read-only	Represents the description of one service within DSD
ciscoVdDmpsStatuses	1.3.6.1.4.1.9.9.1051.2.2
ciscoVdDmpStatusTable	1.3.6.1.4.1.9.9.1051.2.2.1		not-accessible	This table consists the attributes of DMPs that are required to be trackd. This includes HDMI up/down status ,DMP up/down status.
ciscoVdDmpStatusEntry	1.3.6.1.4.1.9.9.1051.2.2.1.1		not-accessible	An entry (conceptual row) in the ciscoCvdDmpStatusTable. This entry has the HDMI and DMP up/down status attributes for a particular DMP along with its IPAddress
IP ciscoVdDmpIP	1.3.6.1.4.1.9.9.1051.2.2.1.1.1	IpAddress	not-accessible	Represents the IP-Address of the individual DMP
I32 ciscoVdHdmiUpDownStatus	1.3.6.1.4.1.9.9.1051.2.2.1.1.2	Integer32	read-only	Represents the HDMI connectivity status to play the external video streams and content 1 On 0 Off -1 unknown
I32 ciscoVdDmpStatus	1.3.6.1.4.1.9.9.1051.2.2.1.1.3	Integer32	read-only	Represents if the DMP is in online of offline mode. 0 : Up 1 : Down -1 : unkonwn
STR ciscoVdDmpidentifier	1.3.6.1.4.1.9.9.1051.2.2.1.1.4	DisplayString	read-only	Represents the identifier of the DMP
I32 ciscoVdNtpSyncStatus	1.3.6.1.4.1.9.9.1051.2.3	Integer32	read-write	It describe the Cisco Vision director NTP sync status 0 : Sync 1 : unsync -1 : Unknown
I32 ciscoVdBkpStatus	1.3.6.1.4.1.9.9.1051.2.4	Integer32	accessible-for-notify	It refers Cisco Vision director system backup status 0 : Success 1 : failure -1 : Unknown
ciscoVisionDmp	1.3.6.1.4.1.9.9.1051.3
I32 ciscoVisionDmpTvOnOffEx	1.3.6.1.4.1.9.9.1051.3.1	Integer32	read-only	This field represents the dmp Tv on Of status 0 : On 1 : Off -1 : Unknown
I32 ciscoVisionDmpNtpStatus	1.3.6.1.4.1.9.9.1051.3.2	Integer32	read-only	This field represents the NTP sync and Unsync 0 : sync 1 : Unsync -1 : Unknown
ciscoVisionDmpPTP	1.3.6.1.4.1.9.9.1051.3.3
I32 ciscoVisionDmpPTPstatus	1.3.6.1.4.1.9.9.1051.3.3.1	Integer32	read-only	This field represents PTP sync status (freerun/master) 0 : sync 1 : Unsync -1 : Unknown
I32 ciscoVisionDmpPTPMaster	1.3.6.1.4.1.9.9.1051.3.3.2	Integer32	read-only	Mater or slave 0 : Master 1 : Slave
STR ciscoVisionDmpPTPDeviation	1.3.6.1.4.1.9.9.1051.3.3.3	DisplayString	read-only	Deviation from master
ciscoVisionNetwork	1.3.6.1.4.1.9.9.1051.3.4
STR ciscoVisionDmpInterfaceDesc	1.3.6.1.4.1.9.9.1051.3.4.1	DisplayString	read-only	A textual string containing information about the interface.
I32 ciscoVisionDmpBytesIn	1.3.6.1.4.1.9.9.1051.3.4.2	Integer32	accessible-for-notify	This field represents DMP Byte In for an interface.
I32 ciscoVisionDmpBytesOut	1.3.6.1.4.1.9.9.1051.3.4.3	Integer32	accessible-for-notify	The total number of bytes transmitted out of the interface, including framing characters
I32 ciscoVisionDmpPktCnt	1.3.6.1.4.1.9.9.1051.3.4.4	Integer32	read-only	The total number of octets transmitted out of the interface, including framing characters
I32 ciscoVisionDmpPktErrCnt	1.3.6.1.4.1.9.9.1051.3.4.5	Integer32	read-only	The total number Error of octets transmitted out of the interface, including framing characters
ciscoVisionDmpCpu	1.3.6.1.4.1.9.9.1051.3.5
I32 ssCpuRawUser	1.3.6.1.4.1.9.9.1051.3.5.1	Integer32	read-only	This field represents the cup raw user for DMP
I32 ssCpuRawIdle	1.3.6.1.4.1.9.9.1051.3.5.2	Integer32	read-only	This field represents the cup raw Idle for DMP

RFC description

A Cisco enterprise MIB for video/vision management capabilities. Provides SNMP objects for monitoring and managing Cisco vision and imaging-related equipment and services.

Start monitoring Cisco Vision digital signage devices with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-VISION-MIB