CISCO-IPSLA-ECHO-MIB

All MIBs › CISCO-IPSLA-ECHO-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2007-08-16

Category: Cisco Devices, Network Monitoring (RMON), Quality of Service

Description: Manages IP SLA echo (ICMP ping and UDP echo) probe configuration and round-trip time results.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-IPSLA-ECHO-MIB?

CISCO-IPSLA-ECHO-MIB is a Cisco IOS MIB that defines templates for IP SLA (Service Level Agreement) echo-type operations - ICMP echo (ping), UDP echo, and TCP connect - used to measure end-to-end network performance between a Cisco router and any IP-enabled device. It exposes configuration templates for these probe types (source address, timeout, packet size, ToS/DSCP, VRF) and stores round-trip-time and reachability results as performance data. This MIB is a network/software performance monitoring tool rather than a hardware sensor MIB: it continuously measures latency and packet-verification failures to remote endpoints, with cipslaIcmpEchoTmplThreshold triggering alerts when response time exceeds acceptable bounds, functioning like an automated network health-check probe. It is a component of the broader Cisco IP SLA MIB family (working alongside CISCO-RTTMON-MIB and related IP SLA MIBs) and depends on that overall IP SLA operation framework. It's deployed on Cisco routers in enterprise and service-provider networks for active performance monitoring and SLA verification of WAN/VPN links, and administrators can download the CISCO-IPSLA-ECHO-MIB file to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-IPSLA-ECHO-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IOS routers

Monitoring Examples

An admin configures and polls cipslaIcmpEchoTmplTable/cipslaIcmpEchoTmplEntry by cipslaIcmpEchoTmplName, setting cipslaIcmpEchoTmplTimeOut and cipslaIcmpEchoTmplThreshold to catch a remote site whose round-trip time has degraded beyond SLA. cipslaIcmpEchoTmplVrfName lets them run the probe within a specific VRF to test reachability across an MPLS VPN, and cipslaIcmpEchoTmplVerifyData confirms payload integrity, revealing corruption on a marginal WAN link. A rising response-time trend on a given template typically signals congestion or a failing path to that destination.

What Can Be Monitored

ICMP/UDP echo round-trip time
probe timeout/threshold status
packet verification data integrity
VRF-scoped reachability

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From INET-ADDRESS-MIB

InetAddress
InetAddressType
InetPortNumber

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

RowStatus
StorageType
TruthValue

OIDs

OID symbolic	OID numeric	Type	Access	Description
STR cipslaIcmpEchoTmplDescription	1.3.6.1.4.1.9.9.636.1.1.1.2	SnmpAdminString	read-create	This field is used to provide description for the ICMP echo template.
U32 cipslaIcmpEchoTmplDistBuckets	1.3.6.1.4.1.9.9.636.1.1.1.15	Unsigned32	read-create	The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaIcmpEchoTmplStatsNumDistBuckets will be kept. The last cipslaIcmpEchoTmplStatsNumDistBucket will contain all entries from its distribution interval start point to infinity.
U32 cipslaIcmpEchoTmplDistInterval	1.3.6.1.4.1.9.9.636.1.1.1.16	Unsigned32	read-create	The statistical distribution buckets interval. Distribution Bucket Example: cipslaIcmpEchoTmplDistBuckets = 5 buckets cipslaIcmpEchoTmplDistInterval = 10 milliseconds \| Bucket 1 \| Bucket 2 \| Bucket 3 \| Bucket 4 \| Bucket 5 \| \| 0-9 ms \| 10-19 ms \| 20-29 ms \| 30-39 ms \| 40-Inf ms \| Odd Example: cipslaIcmpEchoTmplDistBuckets = 1 buckets cipslaIcmpEchoTmplDistInterval = 10 milliseconds \| Bucket 1 \| \| 0-Inf ms \| Thus, this odd example shows that the value of cipslaIcmpEchoTmplDistInterval does not apply when cipslaIcmpEchoTmplDistBuckets is one.
cipslaIcmpEchoTmplEntry	1.3.6.1.4.1.9.9.636.1.1.1		not-accessible	A row entry representing an IPSLA ICMP echo template.
U32 cipslaIcmpEchoTmplHistBuckets	1.3.6.1.4.1.9.9.636.1.1.1.12	Unsigned32	read-create	The maximum number of history buckets to record. This value is set to the number of operations to keep per lifetime. After cipslaIcmpEchoTmplHistBuckets are filled, the oldest entries are deleted and the most recent cipslaIcmpEchoTmplHistBuckets buckets are retained.
INT cipslaIcmpEchoTmplHistFilter	1.3.6.1.4.1.9.9.636.1.1.1.13	INTEGER	read-create	Defines a filter for adding RTT results to the history buffer: none(1) - no history is recorded all(2) - the results of all completion times and failed completions are recorded overThreshold(3) - the results of completion times over cipslaIcmpEchoTmplThreshold are recorded. failures(4) - the results of failed operations (only) are recorded.
U32 cipslaIcmpEchoTmplHistLives	1.3.6.1.4.1.9.9.636.1.1.1.11	Unsigned32	read-create	The maximum number of history lives to record. A life is defined by the countdown (or transition) to zero by the cipslaAutoGroupScheduleLife object. A new life is created when the same conceptual control row is restarted via the transition of the cipslaAutoGroupScheduleLife object and its subsequent countdown. The value of zero will shut off all data collection.
STR cipslaIcmpEchoTmplName	1.3.6.1.4.1.9.9.636.1.1.1.1	SnmpAdminString	not-accessible	This field is used to specify the ICMP echo template name.
U32 cipslaIcmpEchoTmplReqDataSize	1.3.6.1.4.1.9.9.636.1.1.1.7	Unsigned32	read-create	This object represents the number of octets to be placed into the ARR Data portion of the request message, when using SNA protocols. For non-ARR protocols' IP SLA request/responses, this value represents the native payload size. REMEMBER: The ARR Header overhead is not included in this value.
ROW cipslaIcmpEchoTmplRowStatus	1.3.6.1.4.1.9.9.636.1.1.1.18	RowStatus	read-create	The status of the conceptual ICMP echo template control row. When the status is active, all the read-create objects in that row can be modified.
IP cipslaIcmpEchoTmplSrcAddr	1.3.6.1.4.1.9.9.636.1.1.1.4	InetAddress	read-create	A string which specifies the IP address of the source.
IPt cipslaIcmpEchoTmplSrcAddrType	1.3.6.1.4.1.9.9.636.1.1.1.3	InetAddressType	read-create	An enumerated value which specifies the IP address type of the source. It must be used along with the cipslaIcmpEchoTmplSrcAddr object.
U32 cipslaIcmpEchoTmplStatsHours	1.3.6.1.4.1.9.9.636.1.1.1.14	Unsigned32	read-create	The maximum number of hours for which statistics are maintained. Specifically this is the number of hourly groups to keep before rolling over. The value of one is not advisable because the hourly group will close and immediately be deleted before the network management station will have the opportunity to retrieve the statistics. The value of zero will shut off data collection.
STO cipslaIcmpEchoTmplStorageType	1.3.6.1.4.1.9.9.636.1.1.1.17	StorageType	read-create	The storage type of this conceptual row.
cipslaIcmpEchoTmplTable	1.3.6.1.4.1.9.9.636.1.1		not-accessible	A table that contains ICMP echo template definitions.
U32 cipslaIcmpEchoTmplThreshold	1.3.6.1.4.1.9.9.636.1.1.1.10	Unsigned32	read-create	This object defines an administrative threshold limit. If the IP SLA operation time exceeds this limit and if the condition specified in cipslaIcmpEchoTmplHistFilter is satisfied, one threshold crossing occurrence will be counted.
U32 cipslaIcmpEchoTmplTimeOut	1.3.6.1.4.1.9.9.636.1.1.1.5	Unsigned32	read-create	Specifies the duration to wait for a IP SLA operation completion. For connection oriented protocols, this may cause the connection to be closed by the operation. Once closed, it will be assumed that the connection reestablishment will be performed. To prevent unwanted closure of connections, be sure to set this value to a realistic connection timeout.
U32 cipslaIcmpEchoTmplTOS	1.3.6.1.4.1.9.9.636.1.1.1.8	Unsigned32	read-create	This object represents the type of service octet in an IP header.
T/F cipslaIcmpEchoTmplVerifyData	1.3.6.1.4.1.9.9.636.1.1.1.6	TruthValue	read-create	When set to true, the resulting data in each IP SLA operation is compared with the expected data. This includes checking header information (if possible) and exact packet size.
STR cipslaIcmpEchoTmplVrfName	1.3.6.1.4.1.9.9.636.1.1.1.9	SnmpAdminString	read-create	This field is used to specify the VRF name with which the IP SLA operation will be used. For regular IP SLA operation this field should not be configured. The agent will use this field to identify the VRF routing table for this operation.
T/F cipslaTcpConnTmplControlEnable	1.3.6.1.4.1.9.9.636.1.3.1.3	TruthValue	read-create	If this object is enabled, then the IP SLA application will send control messages to a responder, residing on the target router to respond to the data request packets being sent by the source router.
STR cipslaTcpConnTmplDescription	1.3.6.1.4.1.9.9.636.1.3.1.2	SnmpAdminString	read-create	A string which provides description for the TCP connect template.
U32 cipslaTcpConnTmplDistBuckets	1.3.6.1.4.1.9.9.636.1.3.1.15	Unsigned32	read-create	The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaTcpConnTmplDistBuckets will be kept. The last cipslaTcpConnTmplDistBuckets will contain all entries from its distribution interval start point to infinity.
U32 cipslaTcpConnTmplDistInterval	1.3.6.1.4.1.9.9.636.1.3.1.16	Unsigned32	read-create	The statistical distribution buckets interval. Distribution Bucket Example: cipslaTcpConnTmplDistBuckets = 5 buckets cipslaTcpConnTmplDistInterval = 10 milliseconds \| Bucket 1 \| Bucket 2 \| Bucket 3 \| Bucket 4 \| Bucket 5 \| \| 0-9 ms \| 10-19 ms \| 20-29 ms \| 30-39 ms \| 40-Inf ms \| Odd Example: cipslaTcpConnTmplDistBuckets = 1 buckets cipslaTcpConnTmplDistInterval = 10 milliseconds \| Bucket 1 \| \| 0-Inf ms \| Thus, this odd example shows that the value of cipslaTcpConnTmplDistInterval does not apply when cipslaTcpConnTmplDistBuckets is one.
cipslaTcpConnTmplEntry	1.3.6.1.4.1.9.9.636.1.3.1		not-accessible	A row entry representing an IPSLA TCP connect template.
U32 cipslaTcpConnTmplHistBuckets	1.3.6.1.4.1.9.9.636.1.3.1.12	Unsigned32	read-create	The maximum number of history buckets to record. This value should be set to the number of operations to keep per lifetime. After cipslaTcpConnTmplHistBuckets are filled, the oldest entries are deleted and the most recent cipslaTcpConnTmplHistBuckets buckets are retained.
INT cipslaTcpConnTmplHistFilter	1.3.6.1.4.1.9.9.636.1.3.1.13	INTEGER	read-create	Defines a filter for adding RTT results to the history buffer: none(1) - no history is recorded all(2) - the results of all completion times and failed completions are recorded overThreshold(3) - the results of completion times over cipslaTcpConnTmplThreshold are recorded. failures(4) - the results of failed operations (only) are recorded.
U32 cipslaTcpConnTmplHistLives	1.3.6.1.4.1.9.9.636.1.3.1.11	Unsigned32	read-create	The maximum number of history lives to record. A life is defined by the countdown (or transition) to zero by the cipslaAutoGroupScheduleLife object. A new life is created when the same conceptual control row is restarted via the transition of the cipslaAutoGroupScheduleLife object and its subsequent countdown. The value of zero will shut off all data collection.
STR cipslaTcpConnTmplName	1.3.6.1.4.1.9.9.636.1.3.1.1	SnmpAdminString	not-accessible	A string which specifies the TCP connect template name.
ROW cipslaTcpConnTmplRowStatus	1.3.6.1.4.1.9.9.636.1.3.1.18	RowStatus	read-create	The status of the conceptual tcp connect control row. When the status is active, all the read-create objects in that row can be modified.
IP cipslaTcpConnTmplSrcAddr	1.3.6.1.4.1.9.9.636.1.3.1.5	InetAddress	read-create	A string which specifies the IP address of the source.
IPt cipslaTcpConnTmplSrcAddrType	1.3.6.1.4.1.9.9.636.1.3.1.4	InetAddressType	read-create	An enumerated value which specifies the IP address type of the source. It must be used along with the cipslaTcpConnTmplSrcAddr object.
INE cipslaTcpConnTmplSrcPort	1.3.6.1.4.1.9.9.636.1.3.1.6	InetPortNumber	read-create	This object represents the source's port number. If this object is not specified, the application will get a port allocated by the system.
U32 cipslaTcpConnTmplStatsHours	1.3.6.1.4.1.9.9.636.1.3.1.14	Unsigned32	read-create	The maximum number of hours for which statistics are maintained. Specifically this is the number of hourly groups to keep before rolling over. The value of one is not advisable because the hourly group will close and immediately be deleted before the network management station will have the opportunity to retrieve the statistics. The value of zero will shut off data collection.
STO cipslaTcpConnTmplStorageType	1.3.6.1.4.1.9.9.636.1.3.1.17	StorageType	read-create	The storage type of this conceptual row.
cipslaTcpConnTmplTable	1.3.6.1.4.1.9.9.636.1.3		not-accessible	A table that contains TCP connect template specific definitions.
U32 cipslaTcpConnTmplThreshold	1.3.6.1.4.1.9.9.636.1.3.1.10	Unsigned32	read-create	This object defines an administrative threshold limit. If the IP SLA operation time exceeds this limit and if the condition specified in cipslaTcpConnTmplHistFilter is satisfied, one threshold crossing occurrence will be counted.
U32 cipslaTcpConnTmplTimeOut	1.3.6.1.4.1.9.9.636.1.3.1.7	Unsigned32	read-create	Specifies the duration to wait for an IP SLA operation completion. For connection oriented protocols, this may cause the connection to be closed by the operation. Once closed, it will be assumed that the connection reestablishment will be performed. To prevent unwanted closure of connections, be sure to set this value to a realistic connection timeout.
U32 cipslaTcpConnTmplTOS	1.3.6.1.4.1.9.9.636.1.3.1.9	Unsigned32	read-create	This object represents the type of service octet in an IP header.
T/F cipslaTcpConnTmplVerifyData	1.3.6.1.4.1.9.9.636.1.3.1.8	TruthValue	read-create	When set to true, the resulting data in each IP SLA operation is compared with the expected data. This includes checking header information (if possible) and exact packet size.
T/F cipslaUdpEchoTmplControlEnable	1.3.6.1.4.1.9.9.636.1.2.1.3	TruthValue	read-create	If this object is enabled, then the IP SLA application will send control messages to a responder, residing on the target router to respond to the data request packets being sent by the source router.
STR cipslaUdpEchoTmplDescription	1.3.6.1.4.1.9.9.636.1.2.1.2	SnmpAdminString	read-create	A string which provides description to the UDP echo template.
U32 cipslaUdpEchoTmplDistBuckets	1.3.6.1.4.1.9.9.636.1.2.1.17	Unsigned32	read-create	The maximum number of statistical distribution buckets to accumulate. Since this index does not rollover, only the first cipslaUdpEchoTmplStatsNumDistBuckets will be kept. The last cipslaUdpEchoTmplStatsNumDistBuckets will contain all entries from its distribution interval start point to infinity.
U32 cipslaUdpEchoTmplDistInterval	1.3.6.1.4.1.9.9.636.1.2.1.18	Unsigned32	read-create	The statistical distribution buckets interval. Distribution Bucket Example: cipslaUdpEchoTmplDistBuckets = 5 buckets cipslaUdpEchoTmplDistInterval = 10 milliseconds \| Bucket 1 \| Bucket 2 \| Bucket 3 \| Bucket 4 \| Bucket 5 \| \| 0-9 ms \| 10-19 ms \| 20-29 ms \| 30-39 ms \| 40-Inf ms \| Odd Example: cipslaUdpEchoTmplDistBuckets = 1 buckets cipslaUdpEchoTmplDistInterval = 10 milliseconds \| Bucket 1 \| \| 0-Inf ms \| Thus, this odd example shows that the value of cipslaUdpEchoTmplDistInterval does not apply when cipslaUdpEchoTmplDistBuckets is one.
cipslaUdpEchoTmplEntry	1.3.6.1.4.1.9.9.636.1.2.1		not-accessible	A row entry representing an IPSLA UDP echo template.
U32 cipslaUdpEchoTmplHistBuckets	1.3.6.1.4.1.9.9.636.1.2.1.14	Unsigned32	read-create	The maximum number of history buckets to record. This value should be set to the number of operations to keep per lifetime. After cipslaUdpEchoTmplHistBuckets are filled, the oldest entries are deleted and the most recent cipslaUdpEchoTmplHistBuckets buckets are retained.
INT cipslaUdpEchoTmplHistFilter	1.3.6.1.4.1.9.9.636.1.2.1.15	INTEGER	read-create	Defines a filter for adding RTT results to the history buffer: none(1) - no history is recorded all(2) - the results of all completion times and failed completions are recorded overThreshold(3) - the results of completion times over cipslaUdpEchoTmplThreshold are recorded. failures(4) - the results of failed operations (only) are recorded.
U32 cipslaUdpEchoTmplHistLives	1.3.6.1.4.1.9.9.636.1.2.1.13	Unsigned32	read-create	The maximum number of history lives to record. A life is defined by the countdown (or transition) to zero by the cipslaAutoGroupScheduleLife object. A new life is created when the same conceptual control row is restarted via the transition of the cipslaAutoGroupScheduleLife object and its subsequent countdown. The value of zero will shut off all data collection.
STR cipslaUdpEchoTmplName	1.3.6.1.4.1.9.9.636.1.2.1.1	SnmpAdminString	not-accessible	A string which specifies the UDP echo template name.
U32 cipslaUdpEchoTmplReqDataSize	1.3.6.1.4.1.9.9.636.1.2.1.9	Unsigned32	read-create	This object represents the number of octets to be placed into the ARR Data portion of the request message, when using SNA protocols. For non-ARR protocols' RTT request/responses, this value represents the native payload size. REMEMBER: The ARR Header overhead is not included in this value.
ROW cipslaUdpEchoTmplRowStatus	1.3.6.1.4.1.9.9.636.1.2.1.20	RowStatus	read-create	The status of the conceptual UDP echo template control row. When the status is active, all the read-create objects in that row can be modified.
IP cipslaUdpEchoTmplSrcAddr	1.3.6.1.4.1.9.9.636.1.2.1.5	InetAddress	read-create	A string which specifies the IP address of the source.
IPt cipslaUdpEchoTmplSrcAddrType	1.3.6.1.4.1.9.9.636.1.2.1.4	InetAddressType	read-create	An enumerated value which specifies the IP address type of the source. It must be used along with the cipslaUdpEchoTmplSrcAddr object.
INE cipslaUdpEchoTmplSrcPort	1.3.6.1.4.1.9.9.636.1.2.1.6	InetPortNumber	read-create	This object represents the source's port number. If this object is not specified, the application will get a port allocated by the system.
U32 cipslaUdpEchoTmplStatsHours	1.3.6.1.4.1.9.9.636.1.2.1.16	Unsigned32	read-create	The maximum number of hours for which statistics are maintained. Specifically this is the number of hourly groups to keep before rolling over. The value of one is not advisable because the hourly group will close and immediately be deleted before the network management station will have the opportunity to retrieve the statistics. The value of zero will shut off data collection.
STO cipslaUdpEchoTmplStorageType	1.3.6.1.4.1.9.9.636.1.2.1.19	StorageType	read-create	The storage type of this conceptual row.
cipslaUdpEchoTmplTable	1.3.6.1.4.1.9.9.636.1.2		not-accessible	A table that contains UDP echo template specific definitions.
U32 cipslaUdpEchoTmplThreshold	1.3.6.1.4.1.9.9.636.1.2.1.12	Unsigned32	read-create	This object defines an administrative threshold limit. If the IP SLA operation time exceeds this limit and if the condition specified in cipslaUdpEchoTmplHistFilter is satisfied, one threshold crossing occurrence will be counted.
U32 cipslaUdpEchoTmplTimeOut	1.3.6.1.4.1.9.9.636.1.2.1.7	Unsigned32	read-create	Specifies the duration to wait for an IP SLA operation completion. For connection oriented protocols, this may cause the connection to be closed by the operation. Once closed, it will be assumed that the connection reestablishment will be performed. To prevent unwanted closure of connections, be sure to set this value to a realistic connection timeout.
U32 cipslaUdpEchoTmplTOS	1.3.6.1.4.1.9.9.636.1.2.1.10	Unsigned32	read-create	This object represents the type of service octet in an IP header.
T/F cipslaUdpEchoTmplVerifyData	1.3.6.1.4.1.9.9.636.1.2.1.8	TruthValue	read-create	When set to true, the resulting data in each IP SLA operation is compared with the expected data. This includes checking header information (if possible) and exact packet size.
STR cipslaUdpEchoTmplVrfName	1.3.6.1.4.1.9.9.636.1.2.1.11	SnmpAdminString	read-create	This field is used to specify the VRF name with which the IP SLA operation will be used. For regular IP SLA operation this field should not be configured. The agent will use this field to identify the VRF routing Table for this operation.
ciscoIpSlaEchoMIB	1.3.6.1.4.1.9.9.636			This MIB module defines the templates for IP SLA operations of ICMP echo, UDP echo and TCP connect. The ICMP echo operation measures end-to-end response time between a Cisco router and any IP enabled device by computing the time taken between sending an ICMP echo request message to the destination and receiving an ICMP echo reply. The UDP echo operation measures end-to-end response time between a Cisco router and any IP enabled device by computing the time taken between sending an UDP echo request message to the destination and receiving an UDP echo reply. The TCP connect operation measures end-to-end response time between a Cisco router and any IP enabled device by computing the time taken to perform a TCP connect operation.
ciscoIpSlaEchoMIBCompliance	1.3.6.1.4.1.9.9.636.2.1.1			The compliance statement for IP SLA (1) ICMP echo Template (2) UDP echo Template (3) TCP connect Template
ciscoIpSlaEchoMIBCompliances	1.3.6.1.4.1.9.9.636.2.1
ciscoIpSlaEchoMIBConform	1.3.6.1.4.1.9.9.636.2
ciscoIpSlaEchoMIBGroups	1.3.6.1.4.1.9.9.636.2.2
ciscoIpSlaEchoMIBNotifs	1.3.6.1.4.1.9.9.636.0
ciscoIpSlaEchoMIBObjects	1.3.6.1.4.1.9.9.636.1
ciscoIpSlaIcmpEchoTmplGroup	1.3.6.1.4.1.9.9.636.2.2.1			A collection of objects related to ICMP echo Template.
ciscoIpSlaTcpConnTmplGroup	1.3.6.1.4.1.9.9.636.2.2.3			A collection of objects related to TCP connect Template.
ciscoIpSlaUdpEchoTmplGroup	1.3.6.1.4.1.9.9.636.2.2.2			A collection of objects related to UDP echo Template.

RFC description

Defines templates for IP SLA (Service Level Agreement) echo operations including ICMP echo, UDP echo, and TCP connect tests for performance monitoring.

Start monitoring Cisco IOS routers with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-IPSLA-ECHO-MIB

What Is CISCO-IPSLA-ECHO-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description