CISCO-TELEPRESENCE-MIB

All MIBs › CISCO-TELEPRESENCE-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2014-11-24

Category: Cisco Devices, Telephony and VoIP

Description: Provides general management for Cisco TelePresence endpoints including call status, codec, and peripheral monitoring.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-TELEPRESENCE-MIB?

CISCO-TELEPRESENCE-MIB provides general management for Cisco TelePresence video-collaboration systems, covering the CODEC unit and its attached peripherals such as displays, cameras, speakers, microphones, and presentation devices. It exposes network configuration data (VLAN ID, default gateway), system-control objects (a remote system-reset action), and a peripheral status table tracking each attached peripheral's description and current status. Its monitoring focus is squarely on hardware health of the TelePresence endpoint: ctpPeripheralStatusTable reveals whether a camera, display, microphone, or other peripheral has failed or disconnected, while notification-enable objects govern alerts for peripheral errors, user authentication failures, and peripheral status changes, and ctpSystemReset supports remote recovery of a hung CODEC. As a Cisco-proprietary endpoint-management MIB, it doesn't appear to formally build on other MIBs, though it would typically be polled alongside standard interface MIBs for the endpoint's network connectivity. It is typically deployed on Cisco TelePresence CODEC and room-system hardware in enterprise video-conferencing deployments. Engineers searching for cisco telepresence system reference this MIB to monitor Cisco TelePresence endpoint status via SNMP.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-TELEPRESENCE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco TelePresence CODEC and room-system endpoints

Monitoring Examples

An admin would poll ctpPeripheralStatusTable/ctpPeripheralStatusEntry keyed by ctpPeripheralIndex to read ctpPeripheralDescription and ctpPeripheralStatus for each attached device, catching a camera or microphone reporting a fault status before a scheduled TelePresence meeting. Enabling ctpPeriStatusChangeNotifyEnable and ctpPeripheralErrorNotifyEnable ensures the system sends a trap the moment a peripheral drops offline rather than requiring constant polling. Separately, ctpSysUserAuthFailNotifyEnable would alert on repeated failed login attempts to the CODEC's management interface, and ctpSystemReset could be invoked remotely if the CODEC becomes unresponsive.

What Can Be Monitored

peripheral (camera/display/mic/speaker) status
peripheral error notifications
authentication failure alerts
VLAN and default gateway configuration
remote system reset

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From IF-MIB

InterfaceIndexOrZero

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMP-FRAMEWORK-MIB

SnmpAdminString

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using ctpRS232PeripheralConnStatus OID:

Select a Cisco TelePresence endpoint as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type ctpRS232PeripheralConnStatus into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. This object specifies peripheral which is connected via RS232. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is an INTEGER-type OID, Value bounds is the most useful condition here — trigger an alert if the value is anything other than 'connected', since that indicates the condition this object reports has changed to one worth investigating. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoTelepresenceCompliance	1.3.6.1.4.1.9.9.643.2.1.1			The compliance statement for entities which implement the Cisco Telepresence MIB.
ciscoTelepresenceComplianceR01	1.3.6.1.4.1.9.9.643.2.1.2			The compliance statement for entities which implement the Cisco Telepresence MIB.
ciscoTelepresenceComplianceR02	1.3.6.1.4.1.9.9.643.2.1.3			The compliance statement for entities which implement the Cisco Telepresence MIB.
ciscoTelepresenceComplianceR03	1.3.6.1.4.1.9.9.643.2.1.4			The compliance statement for entities which implement the Cisco Telepresence MIB.
ciscoTelepresenceComplianceR04	1.3.6.1.4.1.9.9.643.2.1.5			The compliance statement for entities which implement the Cisco Telepresence MIB.
ciscoTelepresenceComplianceR05	1.3.6.1.4.1.9.9.643.2.1.6			The compliance statement for entities which implement the Cisco Telepresence MIB.
ciscoTelepresenceCompliances	1.3.6.1.4.1.9.9.643.2.1
ciscoTelepresenceMIB	1.3.6.1.4.1.9.9.643			The MIB module defines the managed objects for a Telepresence system. Telepresence refers to a set of technologies which allow a person to feel as if they were present, to give the appearance that they were present, or to have an effect, at a location other than their true location. A complete Telepresence system includes one or more Telepresence CODECS and peripherals such as display, camera, speaker, microphone and presentation device. Peripherals are attached directly to a Telepresence CODEC via an interface. Some peripherals may have more than one interface to transmit audio and/or video data and provide a configuration and/or control access.
ciscoTelepresenceMIBConform	1.3.6.1.4.1.9.9.643.2
ciscoTelepresenceMIBGroups	1.3.6.1.4.1.9.9.643.2.2
ciscoTelepresenceMIBNotifs	1.3.6.1.4.1.9.9.643.0
ciscoTelepresenceMIBObjects	1.3.6.1.4.1.9.9.643.1
ciscoTpConfigurationGroup	1.3.6.1.4.1.9.9.643.2.2.1			A collection of objects providing the notification configuration and system reset. ciscoTpConfigurationGroup object is superseded by ciscoTpConfigurationGroupR01.
ciscoTpConfigurationGroupR01	1.3.6.1.4.1.9.9.643.2.2.10			A collection of objects providing the notification configuration and system reset.
ciscoTpConfigurationGroupR02	1.3.6.1.4.1.9.9.643.2.2.12			A collection of objects providing network configurations.
ciscoTpDPPeripheralStatusGroup	1.3.6.1.4.1.9.9.643.2.2.13			A collection of objects providing the information about Telepresence peripheral which is connected via Display Port.
ciscoTpEventHistoryGroup	1.3.6.1.4.1.9.9.643.2.2.3			A collection of managed objects providing notification event history information. ciscoTpEventHistoryGroup object is superseded by ciscoTpEventHistoryGroupR01.
ciscoTpEventHistoryGroupR01	1.3.6.1.4.1.9.9.643.2.2.8			A collection of managed objects providing notification event history information.
ciscoTpNotificationGroup	1.3.6.1.4.1.9.9.643.2.2.4			A collection of Telepresence system notifications. ciscoTpNotificationGroup object is superseded by ciscoTpNotificationGroupR01.
ciscoTpNotificationGroupR01	1.3.6.1.4.1.9.9.643.2.2.9			A collection of Telepresence system notifications.
ciscoTpPeripheralAttributeGroup	1.3.6.1.4.1.9.9.643.2.2.6			A collection of managed objects providing peripheral attribute information.
ciscoTpPeripheralStatusGroup	1.3.6.1.4.1.9.9.643.2.2.2			A collection of objects providing the Telepresence peripheral information. ciscoTpPeripheralStatusGroup object is superseded by ciscoTpPeripheralStatusGroupR01.
ciscoTpPeripheralStatusGroupR01	1.3.6.1.4.1.9.9.643.2.2.7			A collection of objects providing the Telepresence peripheral information. ciscoTpPeripheralStatusGroupR01 object is superseded by ciscoTpPeripheralStatusGroupR02.
ciscoTpPeripheralStatusGroupR02	1.3.6.1.4.1.9.9.643.2.2.11			A collection of objects providing the Telepresence peripheral information.
ciscoTpRS232PeripheralStatusGroup	1.3.6.1.4.1.9.9.643.2.2.5			A collection of objects providing the information about Telepresence peripheral which is connected via RS232.
IP ctp802dot11PeripheralAddr	1.3.6.1.4.1.9.9.643.1.2.8.1.4	InetAddress	read-only	This object indicates the address of the attached peripheral in the format indicated by the corresponding instance of ctp802dot11PeripheralAddrType.
IPt ctp802dot11PeripheralAddrType	1.3.6.1.4.1.9.9.643.1.2.8.1.3	InetAddressType	read-only	This object indicates the type of address indicated by the corresponding instance of ctp802dot11PeripheralAddr.
NUM ctp802dot11PeripheralIfIndex	1.3.6.1.4.1.9.9.643.1.2.8.1.2	InterfaceIndexOrZero	read-only	This object indicates an index value that uniquely identifies the interface to which this entry is applicable. If this entry doesn't have corresponding ifIndex, then this value will have value '0'.
U32 ctp802dot11PeripheralIndex	1.3.6.1.4.1.9.9.643.1.2.8.1.1	Unsigned32	not-accessible	This object indicates an arbitrary positive, integer-value that uniquely identifies the IEEE 802.11 peripheral.
CTP ctp802dot11PeripheralLinkStatus	1.3.6.1.4.1.9.9.643.1.2.8.1.6	CtpPeripheralCableCode	read-only	This object indicates the link status of the attached peripheral via IEEE 802.11 link.
U32 ctp802dot11PeripheralLinkStrength	1.3.6.1.4.1.9.9.643.1.2.8.1.5	Unsigned32	read-only	This object indicates the link strength of an IEEE 802.11 link for a peripheral. A return value of 0 indicates the link is not connected. A return value between 1 - 5 indicates the strength of the link, with 1 being the weakest and 5 being the strongest.
ctp802dot11PeripheralStatusEntry	1.3.6.1.4.1.9.9.643.1.2.8.1		not-accessible	An entry describes one Telepresence 802dot11 peripheral.
ctp802dot11PeripheralStatusTable	1.3.6.1.4.1.9.9.643.1.2.8		not-accessible	The table contains information about all peripherals connected to the system via 802dot11.
IP ctpDefaultGateway	1.3.6.1.4.1.9.9.643.1.1.7	InetAddress	read-write	This object specifies the Telepresence system default gateway.
IPt ctpDefaultGatewayAddrType	1.3.6.1.4.1.9.9.643.1.1.6	InetAddressType	read-write	This object specifies the type of address contained in the corresponding instance of ctpDefaultGateway.
CTP ctpDPPeripheralCableStatus	1.3.6.1.4.1.9.9.643.1.2.9.1.2	CtpPeripheralCableCode	read-only	This object indicates the cable status of a peripheral which is attached to the system via Display Port interface. This object returns 'loose' if system detects cable is 'unplugged' but power is 'on'.
U32 ctpDPPeripheralIndex	1.3.6.1.4.1.9.9.643.1.2.9.1.1	Unsigned32	not-accessible	This object indicates a unique number for a peripheral DP. If no peripheral has more than one DP, this object will have value '1'.
CTP ctpDPPeripheralPowerStatus	1.3.6.1.4.1.9.9.643.1.2.9.1.3	CtpPeripheralPowerCode	read-only	This object indicates the power status of a peripheral which is attached to the system via Display Port interface. This object returns 'unknown' if system detects cable is 'unplugged'.
ctpDPPeripheralStatusEntry	1.3.6.1.4.1.9.9.643.1.2.9.1		not-accessible	An entry contains information about one Telepresence DP peripheral.
ctpDPPeripheralStatusTable	1.3.6.1.4.1.9.9.643.1.2.9		not-accessible	The table contains information about all peripherals connected to the system via DP.
CTP ctpDVIPeripheralCableStatus	1.3.6.1.4.1.9.9.643.1.2.4.1.2	CtpPeripheralCableCode	read-only	This object specifies attached device cable status reported by DVI.
U32 ctpDVIPeripheralIndex	1.3.6.1.4.1.9.9.643.1.2.4.1.1	Unsigned32	not-accessible	This object specifies a unique number for a peripheral DVI. If no peripheral has more than one DVI, this object will have value '1'. Note that some Telepresence systems have no DVI port and some Telepresence systems have only one DVI port.
ctpDVIPeripheralStatusEntry	1.3.6.1.4.1.9.9.643.1.2.4.1		not-accessible	An entry contains information about one peripheral attached to the Telepresence system via DVI.
ctpDVIPeripheralStatusTable	1.3.6.1.4.1.9.9.643.1.2.4		not-accessible	The table contains information about all peripherals connected to the system via DVI.
IP ctpEtherPeripheralAddr	1.3.6.1.4.1.9.9.643.1.2.2.1.4	InetAddress	read-only	This object specifies the address of the attached peripheral in the format given by the corresponding instance of ctpEtherPeripheralAddrType.
IPt ctpEtherPeripheralAddrType	1.3.6.1.4.1.9.9.643.1.2.2.1.3	InetAddressType	read-only	This object specifies the type of address contained in the corresponding instance of ctpEtherPeripheralAddr.
NUM ctpEtherPeripheralIfIndex	1.3.6.1.4.1.9.9.643.1.2.2.1.2	InterfaceIndexOrZero	read-only	The object specifies an index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex. If this entry doesn't have corresponding ifIndex, then this value will have value '0'.
U32 ctpEtherPeripheralIndex	1.3.6.1.4.1.9.9.643.1.2.2.1.1	Unsigned32	not-accessible	This object specifies a unique number for a peripheral Ethernet interface. If no peripheral has more than one Ethernet interface, this object will have value '1'.
CTP ctpEtherPeripheralStatus	1.3.6.1.4.1.9.9.643.1.2.2.1.5	CtpPeripheralStatusCode	read-only	This object specifies attached peripheral status retrieved via Ethernet port.
ctpEtherPeripheralStatusEntry	1.3.6.1.4.1.9.9.643.1.2.2.1		not-accessible	An entry contains information about one peripheral attached to the Telepresence system via Ethernet.
ctpEtherPeripheralStatusTable	1.3.6.1.4.1.9.9.643.1.2.2		not-accessible	The table contains information about all peripherals connected to the system via Ethernet port.
ctpEventHistory	1.3.6.1.4.1.9.9.643.1.3
CTP ctpHDMIPeripheralCableStatus	1.3.6.1.4.1.9.9.643.1.2.3.1.2	CtpPeripheralCableCode	read-only	This object specifies cable status of an attached peripheral. This object is set to 'loose' if system detects cable is 'unplugged' but power is 'on'.
U32 ctpHDMIPeripheralIndex	1.3.6.1.4.1.9.9.643.1.2.3.1.1	Unsigned32	not-accessible	This object specifies a unique number for a peripheral HDMI. If no peripheral has more than one HDMI, this object will have value '1'.
CTP ctpHDMIPeripheralPowerStatus	1.3.6.1.4.1.9.9.643.1.2.3.1.3	CtpPeripheralPowerCode	read-only	This object specifies power status of an attached peripheral. This object is set to 'unknown' if system detects cable is 'unplugged'.
ctpHDMIPeripheralStatusEntry	1.3.6.1.4.1.9.9.643.1.2.3.1		not-accessible	An entry contains information about one Telepresence HDMI peripheral.
ctpHDMIPeripheralStatusTable	1.3.6.1.4.1.9.9.643.1.2.3		not-accessible	The table contains information about all peripherals connected to the system via HDMI.
ctpObjects	1.3.6.1.4.1.9.9.643.1.1
INT ctpPeripheralAttributeDescr	1.3.6.1.4.1.9.9.643.1.2.6.1.2	INTEGER	read-only	This object specifies description of a attribute. The supported attributes are lampOperTime(1) -- indicate the lamp operating time of a peripheral lampState(2) -- indicate the lamp state powerSwitchState(3) -- indicate the power on/off state of a peripheral Note that not all peripheral contains all the supported attributes. Agent reports whatever is available.
ctpPeripheralAttributeEntry	1.3.6.1.4.1.9.9.643.1.2.6.1		not-accessible	An entry contains information about one peripheral attribute related to the peripheral specified by ctpPeripheralIndex.
U32 ctpPeripheralAttributeIndex	1.3.6.1.4.1.9.9.643.1.2.6.1.1	Unsigned32	not-accessible	This object specifies a unique number for a peripheral attribute. If no peripheral has more than one attribute, this object will have value '1'.
ctpPeripheralAttributeTable	1.3.6.1.4.1.9.9.643.1.2.6		not-accessible	The table contains information about attributes for the peripherals which are connected to the system. Peripheral attribute may specify peripheral's component information, for example, an entry may specify lifetime of a lamp on a presentation device.
U32 ctpPeripheralAttributeValue	1.3.6.1.4.1.9.9.643.1.2.6.1.3	Unsigned32	read-only	This object specifies value of the attribute corresponding to ctpPeripheralAttributeDescr. The possible value of the supported attributes is listed as the following: Attribute Unit SYNTAX ----------------------------------------------------------- lampOperTime hours Unsigned32(0..4294967295) lampState INTEGER { on(1), off(2), failure(3), unknown(4) } powerSwitchState INTEGER { on(1), off(2), unknown(3) }
STR ctpPeripheralDescription	1.3.6.1.4.1.9.9.643.1.2.1.1.2	SnmpAdminString	read-only	This object specifies a description of the attached peripheral. Peripheral description may be the peripheral type, model and/or version information or a peripheral signal description.
CTP ctpPeripheralDeviceCategory	1.3.6.1.4.1.9.9.643.1.2.1.1.4	CtpPeripheralDeviceCategoryCode	read-only	This object specifies a peripheral category of a device.
U32 ctpPeripheralDeviceNumber	1.3.6.1.4.1.9.9.643.1.2.1.1.5	Unsigned32	read-only	This object specifies a device number for a peripheral. Device number is unique within the same peripheral device category.
CTP ctpPeripheralErrorDeviceCategory	1.3.6.1.4.1.9.9.643.1.3.3.1.5	CtpPeripheralDeviceCategoryCode	read-only	The object specifies peripheral device category after its status changed.
U32 ctpPeripheralErrorDeviceNumber	1.3.6.1.4.1.9.9.643.1.3.3.1.6	Unsigned32	read-only	The object specifies peripheral device number after its status changed. Device number is unique within the same peripheral device category.
U32 ctpPeripheralErrorHistLastIndex	1.3.6.1.4.1.9.9.643.1.3.2	Unsigned32	read-only	This object specifies the value of the ctpPeripheralErrorHistIndex object corresponding to the last entry added to the table by the agent. If the management application uses the notifications defined by this module, then it can poll this object to determine whether it has missed a notification sent by the agent.
ctpPeripheralErrorHistoryEntry	1.3.6.1.4.1.9.9.643.1.3.3.1		not-accessible	An entry contains information about a Telepresence peripheral status changes.
U32 ctpPeripheralErrorHistoryIndex	1.3.6.1.4.1.9.9.643.1.3.3.1.1	Unsigned32	not-accessible	A unique non-zero integer value that identifies a CtpPeripheralErrorHistoryEntry in the table. The value of this index starts from '1' and monotonically increases for each peripheral error known to the agent. If the value of this object is '4294967295', the agent will use '1' as the value of the next detected peripheral status change.
ctpPeripheralErrorHistoryTable	1.3.6.1.4.1.9.9.643.1.3.3		not-accessible	This table contains a history of the detected peripheral status changes. After a management agent restart, when sysUpTime is reset to zero, this table records all notifications until such time as it becomes full. Thereafter, it remains full by retaining the number of most recent notifications specified in ctpPeripheralErrorHistTableSize.
U32 ctpPeripheralErrorHistTableSize	1.3.6.1.4.1.9.9.643.1.3.1	Unsigned32	read-write	This object specifies the maximum number of entries that the ctpPeripheralErrorHistTable can contain. When the capacity of the ctpPeripheralErrorHistTable has reached the value specified by this object, then the agent deletes the oldest entity in order to accommodate the new entry. A value of '0' prevents any history from being retained. Some agents restrict the value of this object to be less than 500.
U32 ctpPeripheralErrorIndex	1.3.6.1.4.1.9.9.643.1.3.3.1.2	Unsigned32	read-only	The object specifies the value of ctpPeripheralIndex of a peripheral which is in error state. This object is deprecated in favor of ctpPeripheralErrorDeviceCategory and ctpPeripheralErrorDeviceNumber.
NTF ctpPeripheralErrorNotification	1.3.6.1.4.1.9.9.643.0.1			This notification is sent when a peripheral error is detected. This notification is deprecated in favor of ctpPeriStatusChangeNotification. ctpPeripheralErrorNotification object is superseded by ctpPeriStatusChangeNotification.
T/F ctpPeripheralErrorNotifyEnable	1.3.6.1.4.1.9.9.643.1.1.1	TruthValue	read-write	This object controls generation of ctpPeripheralErrorNotification. When the object is 'true(1)', generation of ctpPeripheralErrorNotification is enabled. When the object is 'false(2)', generation of ctpPeripheralErrorNotification is disabled. ctpPeripheralErrorNotifyEnable object is superseded by ctpPeriStatusChangeNotifyEnable.
CTP ctpPeripheralErrorStatus	1.3.6.1.4.1.9.9.643.1.3.3.1.3	CtpPeripheralStatusCode	read-only	This object specifies the peripheral status after its status changed.
TIM ctpPeripheralErrorTimeStamp	1.3.6.1.4.1.9.9.643.1.3.3.1.4	TimeStamp	read-only	This object specifies the value of the sysUpTime object at the time the notification was generated.
U32 ctpPeripheralIndex	1.3.6.1.4.1.9.9.643.1.2.1.1.1	Unsigned32	not-accessible	This object specifies a unique index for a peripheral which is attached to a Telepresence system.
CTP ctpPeripheralStatus	1.3.6.1.4.1.9.9.643.1.2.1.1.3	CtpPeripheralStatusCode	read-only	This object specifies a peripheral status.
ctpPeripheralStatusEntry	1.3.6.1.4.1.9.9.643.1.2.1.1		not-accessible	An entry contains information about one peripheral which is configured or detected by a Telepresence system.
ctpPeripheralStatusObjects	1.3.6.1.4.1.9.9.643.1.2
ctpPeripheralStatusTable	1.3.6.1.4.1.9.9.643.1.2.1		not-accessible	The table contains system peripheral information. An entry in this table has a corresponding entry, INDEX-ed by the same value of ctpPeripheralIndex, in the table relevant to the type of interface: ctpEtherPeripheralStatusTable for Ethernet, ctpHDMIPeripheralStatusTable for HDMI or ctpDVIPeripheralStatusTable for DVI.
NTF ctpPeriStatusChangeNotification	1.3.6.1.4.1.9.9.643.0.3			This notification is sent when a peripheral status is changed.
T/F ctpPeriStatusChangeNotifyEnable	1.3.6.1.4.1.9.9.643.1.1.4	TruthValue	read-write	This object controls generation of ctpPeriStatusChangeNotification. When the object is 'true(1)', generation of ctpPeriStatusChangeNotification is enabled. When the object is 'false(2)', generation of ctpPeriStatusChangeNotification is disabled.
INT ctpRS232PeripheralConnStatusEx	1.3.6.1.4.1.9.9.643.1.2.5.1.3	INTEGER	read-only	This object specifies peripheral which is connected via RS232. When the object is 'connected(1)', peripheral connection via RS232 is working properly. When the object is 'unknown(2)', peripheral connection via RS232 is not working properly. It may due to device problem or connection problem.
U32 ctpRS232PeripheralIndex	1.3.6.1.4.1.9.9.643.1.2.5.1.1	Unsigned32	not-accessible	This object specifies a unique number for a peripheral RS-232. If no peripheral has more than one RS-232, this object will have value '1'. Note that some Telepresence systems have no RS-232 port.
ctpRS232PeripheralStatusEntry	1.3.6.1.4.1.9.9.643.1.2.5.1		not-accessible	An entry contains information about one peripheral attached to the Telepresence system via RS-232.
ctpRS232PeripheralStatusTable	1.3.6.1.4.1.9.9.643.1.2.5		not-accessible	The table contains information about all peripherals connected to the system via RS-232.
NUM ctpRS232PortIndex	1.3.6.1.4.1.9.9.643.1.2.5.1.2	InterfaceIndexOrZero	read-only	The object specifies an index value that uniquely identifies the RS-232 port to which this entry is applicable. Its value is the same as RS-232-MIB's rs232PortIndex for the port. If RS-232-MIB is not supported by the agent, then this value will have value '0'.
CTP ctpSystemReset	1.3.6.1.4.1.9.9.643.1.1.3	CtpSystemResetMode	read-write	This object is used to reset or restart a Telepresence system.
CTP ctpSysUserAuthFailAccessProtocol	1.3.6.1.4.1.9.9.643.1.3.6.1.6	CtpSystemAccessProtocol	read-only	This object specifies the access protocol when a user authentication failure occurred.
U32 ctpSysUserAuthFailHistLastIndex	1.3.6.1.4.1.9.9.643.1.3.5	Unsigned32	read-only	This object specifies the value of the ctpSysUserAuthFailHistIndex object corresponding to the last entry added to the table by the agent. If the management application uses the notifications defined by this module, then it can poll this object to determine whether it has missed a notification sent by the agent.
ctpSysUserAuthFailHistoryEntry	1.3.6.1.4.1.9.9.643.1.3.6.1		not-accessible	An entry contains information about a Telepresence system user authentication failure.
U32 ctpSysUserAuthFailHistoryIndex	1.3.6.1.4.1.9.9.643.1.3.6.1.1	Unsigned32	not-accessible	A unique non-zero integer value that identifies a CtpSysUserAuthFailHistoryEntry in the table. The value of this index starts from '1' and monotonically increases for each system authentication failure event known to the agent. If the value of this object is '4294967295', the agent will use '1' as the value of the next user authentication failure event.
ctpSysUserAuthFailHistoryTable	1.3.6.1.4.1.9.9.643.1.3.6		not-accessible	This table contains a history of detected user authentication failures. After a management agent restart, when sysUpTime is reset to zero, this table records all user authentication failure notifications until such time as it becomes full. Thereafter, it remains full by retaining the number of most recent notifications specified in ctpSysUserAuthFailHistTableSize.
U32 ctpSysUserAuthFailHistTableSize	1.3.6.1.4.1.9.9.643.1.3.4	Unsigned32	read-write	This object specifies the number of entries that the ctpSysUserAuthFailHistTable can contain. When the capacity of the ctpSysUserAuthFailHistTable has reached the value specified by this object, then the agent deletes the oldest entity in order to accommodate the new entry. A value of '0' prevents any history from being retained. Some agents restrict the value of this object to be less than 500.
NTF ctpSysUserAuthFailNotification	1.3.6.1.4.1.9.9.643.0.2			This notification is sent when a user authentication failure via a Telepresence supported access protocol is detected.
T/F ctpSysUserAuthFailNotifyEnable	1.3.6.1.4.1.9.9.643.1.1.2	TruthValue	read-write	This object controls generation of ctpSysUserAuthFailNotification. When the object is 'true(1)', generation of ctpSysUserAuthFailNotification is enabled. When the object is 'false(2)', generation of ctpSysUserAuthFailNotification is disabled.
IP ctpSysUserAuthFailSourceAddr	1.3.6.1.4.1.9.9.643.1.3.6.1.3	InetAddress	read-only	The object specifies the source address when the user authentication failure occurred, in the format given by the corresponding instance of ctpSysUserAuthFailSourceAddrType.
IPt ctpSysUserAuthFailSourceAddrType	1.3.6.1.4.1.9.9.643.1.3.6.1.2	InetAddressType	read-only	The object specifies the type of address contained in the corresponding instance of ctpSysUserAuthFailSourceAddr.
U32 ctpSysUserAuthFailSourcePort	1.3.6.1.4.1.9.9.643.1.3.6.1.4	Unsigned32	read-only	The object specifies the source TCP/UDP port number when a user authentication failure occurred.
TIM ctpSysUserAuthFailTimeStamp	1.3.6.1.4.1.9.9.643.1.3.6.1.7	TimeStamp	read-only	This object specifies the value of the sysUpTime object at the time the notification was generated.
STR ctpSysUserAuthFailUserName	1.3.6.1.4.1.9.9.643.1.3.6.1.5	SnmpAdminString	read-only	The object specifies the user name which was used to gain system access when authentication failure occurred.
CTP ctpUSBPeripheralCableStatus	1.3.6.1.4.1.9.9.643.1.2.7.1.2	CtpPeripheralCableCode	read-only	This object indicates the status of the cable attaching the USB peripheral.
U32 ctpUSBPeripheralIndex	1.3.6.1.4.1.9.9.643.1.2.7.1.1	Unsigned32	not-accessible	This object indicates an arbitrary positive, integer-value that uniquely identifies the USB peripheral.
INT ctpUSBPeripheralPortRate	1.3.6.1.4.1.9.9.643.1.2.7.1.5	INTEGER	read-only	This object indicates the current operational rate of the USB peripheral: 'unknown' - The USB port rate is unknown 'low' - The USB port rate is at 1.5 Mbps. 'full' - The USB port rate is at 12 Mbps. 'high' - The USB port rate is at 480 Mbps.
INT ctpUSBPeripheralPortType	1.3.6.1.4.1.9.9.643.1.2.7.1.4	INTEGER	read-only	This object indicates the type of device connected to the USB port: 'host' - no device os connected to the port 'device' - a usb device is connected to the port 'hub' - a usb hub is connected to the port
INT ctpUSBPeripheralPowerStatus	1.3.6.1.4.1.9.9.643.1.2.7.1.3	INTEGER	read-only	This object indicates the source of power for the attached USB peripheral: 'unknown' - The source of power is unknown. 'self' - The USB peripheral is externally powered. 'bus' - The USB peripheral is powered by the USB bus. 'both' - The USB peripheral can be powered by both the USB bus or self
ctpUSBPeripheralStatusEntry	1.3.6.1.4.1.9.9.643.1.2.7.1		not-accessible	An entry drescribes a peripheral connected to the Telepresence system through USB.
ctpUSBPeripheralStatusTable	1.3.6.1.4.1.9.9.643.1.2.7		not-accessible	This table contains information about all the peripherals connected to the system via USB.
U32 ctpVlanId	1.3.6.1.4.1.9.9.643.1.1.5	Unsigned32	read-write	This object specifies the Telepresence system VLAN ID.

RFC description

Cisco MIB defining managed objects for Telepresence systems, codecs, and peripherals (camera, display, microphone, speaker) monitoring.

Start monitoring Cisco TelePresence endpoints with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-TELEPRESENCE-MIB