CISCO-DMN-DSG-IPV4V6-MIB

All MIBs › CISCO-DMN-DSG-IPV4V6-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2012-03-20

Category: Cisco Devices, Satellite

Description: Manages IPv4 and IPv6 network configuration on the Cisco DMN D9800 digital satellite gateway for management connectivity.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-DMN-DSG-IPV4V6-MIB?

CISCO-DMN-DSG-IPV4V6-MIB is a Cisco proprietary MIB for IPv4/IPv6 management-network configuration on the D9800 satellite gateway, part of the DMN DSG MIB family. It exposes configuration data: each interface's MAC address, and per-port IP configuration including current IPv4 address, network mask, default gateway and a flag indicating whether the port is operating in IPv4 or IPv6 mode. Its monitoring value is foundational software/network status: verifying the device's management IP, mask and gateway are correctly set is essential since a misconfigured address would make the device unreachable for every other form of monitoring. It implements standard IPv4/IPv6 addressing concepts comparable in spirit to the IETF IP-MIB, though structured as a Cisco proprietary module. It is deployed on D9800 satellite gateways in broadcast headends for in-band or out-of-band management network connectivity. Engineers can download the CISCO-DMN-DSG-IPV4V6-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-DMN-DSG-IPV4V6-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco DMN D9800 digital satellite gateway

Monitoring Examples

ipConfigTable/ipConfigEntry, indexed by ipConfigPortIdKey, exposes ipConfigCurIPAddressV4, ipConfigCurNetworkMaskV4 and ipConfigCurDefaultGatewayV4, letting an admin confirm the device's actual management address matches expectations after a network change. ipConfigV4V6Flag indicates whether the port is operating in IPv4 or IPv6 mode, and macInfoTable/macInfoMacAddr ties a physical interface to its hardware MAC address for cross-checking against DHCP or ARP records.

What Can Be Monitored

current IPv4 address and netmask
default gateway
IPv4/IPv6 mode flag
interface MAC address

Imported Objects

From CISCO-DMN-DSG-ROOT-MIB

ciscoDSGUtilities

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoDSGIPv4v6	1.3.6.1.4.1.1429.2.2.5.25			Cisco IPv4v6 MIB.
ipV4v6Table	1.3.6.1.4.1.1429.2.2.5.25.2
macInfoTable	1.3.6.1.4.1.1429.2.2.5.25.2.1		not-accessible	Media Access Control( MAC ) information Table.
macInfoEntry	1.3.6.1.4.1.1429.2.2.5.25.2.1.1		not-accessible	Port Entry index.
I32 macInfoMacIndex	1.3.6.1.4.1.1429.2.2.5.25.2.1.1.1	Integer32	read-only	Port Index.
STR macInfoMacAddr	1.3.6.1.4.1.1429.2.2.5.25.2.1.1.2	DisplayString	read-only	Port MAC Address.
ipConfigTable	1.3.6.1.4.1.1429.2.2.5.25.2.2		not-accessible	IP configuration table.
ipConfigEntry	1.3.6.1.4.1.1429.2.2.5.25.2.2.1		not-accessible	Entry for IP configuration table.
I32 ipConfigPortIdKey	1.3.6.1.4.1.1429.2.2.5.25.2.2.1.1	Integer32	read-only	The port Id.
STR ipConfigName	1.3.6.1.4.1.1429.2.2.5.25.2.2.1.2	DisplayString	read-write	Port(Interface) name.
IP ipConfigCurIPAddressV4	1.3.6.1.4.1.1429.2.2.5.25.2.2.1.3	IpAddress	read-write	The decoder IPv4 address. Format: ###.###.###.###, Range of ### is 0 to 255.
I32 ipConfigCurNetworkMaskV4	1.3.6.1.4.1.1429.2.2.5.25.2.2.1.4	Integer32	read-write	Unit IPv4 CIDR Mask: 8-30 bits.
IP ipConfigCurDefaultGatewayV4	1.3.6.1.4.1.1429.2.2.5.25.2.2.1.5	IpAddress	read-write	The default gateway IPv4 address. Format: ###.###.###.###, Range of ### is 0 to 255.
INT ipConfigV4V6Flag	1.3.6.1.4.1.1429.2.2.5.25.2.2.1.6	INTEGER	read-only	IPv4 or IPv6 IP address type.
INT ipConfigPortMode	1.3.6.1.4.1.1429.2.2.5.25.2.2.1.7	INTEGER	read-write	Interface connection mode.
STR ethStatusLink	1.3.6.1.4.1.1429.2.2.5.25.2.2.1.11	DisplayString	read-only	Port link state.
STR ethStatusSpeed	1.3.6.1.4.1.1429.2.2.5.25.2.2.1.12	DisplayString	read-only	Port link speed.
STR ethStatusDuplex	1.3.6.1.4.1.1429.2.2.5.25.2.2.1.13	DisplayString	read-only	Port link duplex state.
STR ethStatusXover	1.3.6.1.4.1.1429.2.2.5.25.2.2.1.14	DisplayString	read-only	Port link crossover mode.
ethBackupTable	1.3.6.1.4.1.1429.2.2.5.25.2.3		not-accessible	Ethernet Backup table.
ethBackupEntry	1.3.6.1.4.1.1429.2.2.5.25.2.3.1		not-accessible	Entry for Ethernet Backup table.
INT ethBackupIndex	1.3.6.1.4.1.1429.2.2.5.25.2.3.1.1	INTEGER	read-only	Index into Ethernet Backup Table.
INT ethBackupMode	1.3.6.1.4.1.1429.2.2.5.25.2.3.1.2	INTEGER	read-write	Ethernet Backup Mode.
INT ethBackupDirection	1.3.6.1.4.1.1429.2.2.5.25.2.3.1.3	INTEGER	read-write	Ethernet Backup Direction.
INT ethBackupDelayForward	1.3.6.1.4.1.1429.2.2.5.25.2.3.1.4	INTEGER	read-write	Ethernet Backup Forward Delay in ms.
INT ethBackupDelayBack	1.3.6.1.4.1.1429.2.2.5.25.2.3.1.5	INTEGER	read-write	Ethernet Backup Back Delay in seconds.
ethBackupStatusTable	1.3.6.1.4.1.1429.2.2.5.25.2.4		not-accessible	Ethernet Backup Status table.
ethBackupStatusEntry	1.3.6.1.4.1.1429.2.2.5.25.2.4.1		not-accessible	Entry for Ethernet Backup Status table.
INT ethBackupStatusIndex	1.3.6.1.4.1.1429.2.2.5.25.2.4.1.1	INTEGER	read-only	Index into Ethernet Backup Status Table.
STR ethBackupStatusPortsInUse	1.3.6.1.4.1.1429.2.2.5.25.2.4.1.2	DisplayString	read-only	Ethernet ports in use.
STR ethBackupStatusChangeReason	1.3.6.1.4.1.1429.2.2.5.25.2.4.1.3	DisplayString	read-only	Ethernet backup change reason.
STR ethBackupStatusChangeDateTime	1.3.6.1.4.1.1429.2.2.5.25.2.4.1.4	DisplayString	read-only	Time of last ethernet backup change.

RFC description

Cisco DSG IPv4 and IPv6 control and status management for media delivery systems.

Start monitoring Cisco DMN D9800 digital satellite gateway with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-DMN-DSG-IPV4V6-MIB

What Is CISCO-DMN-DSG-IPV4V6-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description