CBS-VRRP-MIB

All MIBs › CBS-VRRP-MIB

Organization: Crossbeam Systems, Inc.

Last Updated: 2005-08-30

Category: Cisco Devices, VLAN and Bridging, VPN and Security

Description: Manages Virtual Router Redundancy Protocol (VRRP) configuration and status on Cisco CBS series small business switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CBS-VRRP-MIB?

CBS-VRRP-MIB is a Crossbeam Systems (XOS) proprietary MIB, despite its "CBS" naming sometimes seen paired with Cisco small-business switches, that defines trap objects for VRRP (Virtual Router Redundancy Protocol) failover-group events on Crossbeam X-Series security/application processing platforms. Its content is almost entirely notification-oriented, covering new-master election events, protocol errors, and failover-group status/priority transitions rather than static configuration tables. In monitoring terms it is squarely a fault/event-monitoring MIB: it reports when a VRRP failover group changes master (and why), when protocol errors occur, and when a group's operational status or priority changes, which together indicate the software-level high-availability health of the redundancy configuration. It depends conceptually on the standard VRRP protocol (RFC 3768) whose failover semantics it mirrors in vendor-specific trap form. It is typically deployed in Crossbeam XOS-based security/networking appliances configured in VRRP high-availability pairs or clusters. Engineers can download the CBS-VRRP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CBS-VRRP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Crossbeam XOS security/networking appliances

Monitoring Examples

A monitoring system would subscribe to cbsVrrpTrapNewMasterReason and cbsVrrpTrapNewMasterVrId/cbsVrrpTrapNewMasterFailGrName traps to detect unplanned VRRP master transitions and identify which failover group and virtual router ID were affected. cbsVrrpTrapFailGrOldStatus/cbsVrrpTrapFailGrNewStatus paired with cbsVrrpTrapFailGrStatusChgReason reveal why a failover group's operational status changed, while cbsVrrpTrapFailGrOldPriority/cbsVrrpTrapFailGrNewPriority combined with cbsVrrpTrapFailGrPriorityChgReason would flag an unexpected priority demotion that could trigger an undesired master handover. Repeated cbsVrrpTrapProtoErrReason notifications would point to a VRRP protocol misconfiguration or version mismatch between redundant peers.

What Can Be Monitored

VRRP new-master election reason
failover group status transitions
failover group priority changes
VRRP protocol error reason
affected virtual router ID/failover group name

Imported Objects

From CBS-HARDWARE-MIB

ModuleState
cbsHwModuleID	OBJECT-TYPE
cbsTrapSeverity

From CBS-VAPGROUP-MIB

cbsVgVapGroupID	OBJECT-TYPE
cbsVgVapGroupName	OBJECT-TYPE

From CROSSBEAM-SYSTEMS-MIB

cbsMIBs	OBJECT-IDENTITY
cbsMgmt	OBJECT-IDENTITY
cbsTraps	OBJECT-IDENTITY

From HOST-RESOURCES-MIB

KBytes
ProductID

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
TimeTicks

From SNMPv2-TC

DisplayString
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using cbsVrrpRemoteBoxPathLinkQuality OID:

Select a Crossbeam Systems XOS security/networking appliance as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cbsVrrpRemoteBoxPathLinkQuality into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The link quality of the remote box path. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Gauge32-type OID, Value bounds is the most useful condition here — trigger an alert if the value drifts significantly from its normal baseline, since an unexpected change often points to a real underlying issue. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
cbsVrrp	1.3.6.1.4.1.6848.2.5
cbsVrrpOperations	1.3.6.1.4.1.6848.2.5.1
INT cbsVrrpTrapNewMasterReason	1.3.6.1.4.1.6848.2.5.1.1	INTEGER	accessible-for-notify	This indicates the reason for NewMaster trap. Used by cbsVrrpTrapNewMaster trap.
STR cbsVrrpTrapNewMasterFailGrName	1.3.6.1.4.1.6848.2.5.1.2	DisplayString	accessible-for-notify	This object contains the VRRP Failover Group name. Used by cbsVrrpTrapNewMaster trap.
I32 cbsVrrpTrapNewMasterVrId	1.3.6.1.4.1.6848.2.5.1.3	Integer32	accessible-for-notify	This object contains the Virtual Router Identifier (VRID). Used by cbsVrrpTrapNewMaster trap.
I32 cbsVrrpTrapNewMasterCirId	1.3.6.1.4.1.6848.2.5.1.4	Integer32	accessible-for-notify	This object contains the circuit ID. Used by cbsVrrpTrapNewMaster trap.
STR cbsVrrpTrapNewMasterCirName	1.3.6.1.4.1.6848.2.5.1.5	DisplayString	accessible-for-notify	This object contains the circuit name. Used by cbsVrrpTrapNewMaster trap.
INT cbsVrrpTrapProtoErrReason	1.3.6.1.4.1.6848.2.5.1.6	INTEGER	accessible-for-notify	This indicates the reason for protocol error trap. Used by cbsVrrpTrapProtoError trap.
FAI cbsVrrpTrapFailGrOldStatus	1.3.6.1.4.1.6848.2.5.1.7	FailGroupStatus	read-only	The old status for the failover group.
FAI cbsVrrpTrapFailGrNewStatus	1.3.6.1.4.1.6848.2.5.1.8	FailGroupStatus	read-only	The new status for the failover group.
STR cbsVrrpTrapFailGrStatusChgReason	1.3.6.1.4.1.6848.2.5.1.9	DisplayString	read-only	Indicates the reason of the status changed, e.g. 1. Down --> Master: Priority is 255 2. Down --> Master: Priority higher than remote box 3. Down --> Master: Timed out waiting for master 4. Down --> Backup: Remote box has higher priority 5. Down --> Backup: Master has lower priority, but preemption is disabled 6. Master --> Backup: Relinquished by user 7. Master --> Backup: Preempted by remote box 8. Master --> Down: Priority is 0 9. Master --> Down: Vrrp failover group is disabled. 10. Master --> Down: No valid virtual routers configured 11. Backup --> Master: Priority higher than remote box 12. Backup --> Master: Priority is 255 13. Backup --> Master: Timed out waiting for master 14. Backup --> Down: Priority is 0 15. Backup --> Down: Vrrp failover group is disabled 16. Backup --> Down: No valid virtual routers configured
I32 cbsVrrpTrapFailGrOldPriority	1.3.6.1.4.1.6848.2.5.1.10	Integer32	read-only	The failover group's old actual priority.
I32 cbsVrrpTrapFailGrNewPriority	1.3.6.1.4.1.6848.2.5.1.11	Integer32	read-only	The failover group's new actual priority.
INT cbsVrrpTrapFailGrPriorityChgReason	1.3.6.1.4.1.6848.2.5.1.12	INTEGER	accessible-for-notify	This indicates the reason for PriorityChanged trap. Used by cbsVrrpTrapFailGrPriorityChanged trap. configured - configured priority changed vrDown - failover group down due to deleted/disabled or invalid configuration vrUp - failover group up due to becoming enable or valid virtualRouter - priority delta of involved virtual router changed verifyNextHop - priority delta of involved nexthop changed monitorCircuit - priority delta of involved monitored circuit changed monitorInterface - priority delta of involved monitored interface changed monitorGroupInterface - priority delta of involved monitored group interface changed activeVapThreshold - priority delta of involved active vap changed
REM cbsVrrpTrapRemoteBoxPathOldStatus	1.3.6.1.4.1.6848.2.5.1.13	RemoteBoxPathStatus	accessible-for-notify	Old status of the specified path of remote box.
REM cbsVrrpTrapRemoteBoxPathNewStatus	1.3.6.1.4.1.6848.2.5.1.14	RemoteBoxPathStatus	accessible-for-notify	New status of the specified path of remote box.
STR cbsVrrpRemBoxPathAddrs	1.3.6.1.4.1.6848.2.5.1.15	DisplayString	accessible-for-notify	All paths' IP addresses of the remote box, they are separated by comma.
cbsVrrpFailGrTable	1.3.6.1.4.1.6848.2.5.2		not-accessible	This table contains information about the VRRP failover groups.
cbsVrrpFailGrEntry	1.3.6.1.4.1.6848.2.5.2.1		not-accessible	An entry in the failover group table.
I32 cbsVrrpFailGrID	1.3.6.1.4.1.6848.2.5.2.1.1	Integer32	read-only	The unique Group ID for the failover group.
STR cbsVrrpFailGrName	1.3.6.1.4.1.6848.2.5.2.1.2	DisplayString	read-only	The name for the failover group.
FAI cbsVrrpFailGrStatus	1.3.6.1.4.1.6848.2.5.2.1.3	FailGroupStatus	read-only	The status for the failover group.
I32 cbsVrrpFailGrConfigPriority	1.3.6.1.4.1.6848.2.5.2.1.4	Integer32	read-only	The configured priority for the failover group.
I32 cbsVrrpFailGrActualPriority	1.3.6.1.4.1.6848.2.5.2.1.5	Integer32	read-only	The actual priority for the failover group.
T/F cbsVrrpFailGrEnabled	1.3.6.1.4.1.6848.2.5.2.1.6	TruthValue	read-only	Specifies if failover group is enabled or not.
T/F cbsVrrpFailGrPreemption	1.3.6.1.4.1.6848.2.5.2.1.7	TruthValue	read-only	Specifies preemption for the failover group is off or on.
TIK cbsVrrpFailGrLastChangeTime	1.3.6.1.4.1.6848.2.5.2.1.8	TimeTicks	read-only	Indicates the elapsed time since the status last changed.
STR cbsVrrpFailGrLastChangeReason	1.3.6.1.4.1.6848.2.5.2.1.9	DisplayString	read-only	Indicates the reason of the status last changed, e.g. 1. Down --> Master: Priority is 255 2. Down --> Master: Priority higher than remote box 3. Down --> Master: Timed out waiting for master 4. Down --> Backup: Remote box has higher priority 5. Down --> Backup: Master has lower priority, but preemption is disabled 6. Master --> Backup: Relinquished by user 7. Master --> Backup: Preempted by remote box 8. Master --> Down: Priority is 0 9. Master --> Down: Vrrp failover group is disabled. 10. Master --> Down: No valid virtual routers configured 11. Backup --> Master: Priority higher than remote box 12. Backup --> Master: Priority is 255 13. Backup --> Master: Timed out waiting for master 14. Backup --> Down: Priority is 0 15. Backup --> Down: Vrrp failover group is disabled 16. Backup --> Down: No valid virtual routers configured
I32 cbsVrrpFailGrMasterSysID	1.3.6.1.4.1.6848.2.5.2.1.10	Integer32	read-only	The system ID of the platform that is operating as the master of this failover group.
I32 cbsVrrpFailGrMasterPriority	1.3.6.1.4.1.6848.2.5.2.1.11	Integer32	read-only	The master failover group's actual priority.
cbsVrrpFailGrCompTable	1.3.6.1.4.1.6848.2.5.3		not-accessible	This table contains information about the components of VRRP failover groups
cbsVrrpFailGrCompEntry	1.3.6.1.4.1.6848.2.5.3.1		not-accessible	An entry in the VRRP failover group component table.
I32 cbsVrrpFailGroupID	1.3.6.1.4.1.6848.2.5.3.1.1	Integer32	read-only	The ID of the VRRP failover group.
STR cbsVrrpFailGroupName	1.3.6.1.4.1.6848.2.5.3.1.2	DisplayString	read-only	The name of the VRRP failover group.
I32 cbsVrrpFailGrCompIndex	1.3.6.1.4.1.6848.2.5.3.1.3	Integer32	read-only	The index for the component.
INT cbsVrrpFailGrCompType	1.3.6.1.4.1.6848.2.5.3.1.4	INTEGER	read-only	The type of the component.
STR cbsVrrpFailGrCompDescr	1.3.6.1.4.1.6848.2.5.3.1.5	DisplayString	read-only	The detailed description about the component, the format depend on the type of the component, e.g.: vr - virtual router circuit name/virtual router id/OSPF cost increment mc - monitored circuit name mi - monitored interface mg - monitored group interface vg - vap group (active-vap-threshold) nh - verify-next-hop IP/virtual router ID
STR cbsVrrpFailGrCompDelta	1.3.6.1.4.1.6848.2.5.3.1.6	DisplayString	read-only	The vrrp component's configured priority delta as well as information about its usage: 10 : priority delta of a component configured as 10 failover group priority NOT decremented by this delta (no failure) -10: priority delta of a component configured as 10 failover group priority decremented by this delta (component failure) 10* or -10*: unknown next hop status
cbsVrrpRemoteBoxPathTable	1.3.6.1.4.1.6848.2.5.4		not-accessible	This table contains information about the path of VRRP remote box
cbsVrrpRemoteBoxPathEntry	1.3.6.1.4.1.6848.2.5.4.1		not-accessible	An entry in the VRRP remote box path table.
I32 cbsVrrpRemoteBoxID	1.3.6.1.4.1.6848.2.5.4.1.1	Integer32	read-only	The system ID of the VRRP remote box.
I32 cbsVrrpRemoteBoxPathIndex	1.3.6.1.4.1.6848.2.5.4.1.2	Integer32	read-only	The index for path of VRRP remote box.
IP cbsVrrpRemoteBoxPathAddr	1.3.6.1.4.1.6848.2.5.4.1.3	IpAddress	read-only	The path's IP address of the VRRP remote box.
STR cbsVrrpRemoteBoxPathLocalIntf	1.3.6.1.4.1.6848.2.5.4.1.4	DisplayString	read-only	The path's IP address can be reachable via this local interface.
IP cbsVrrpRemoteBoxPathLocalAddr	1.3.6.1.4.1.6848.2.5.4.1.5	IpAddress	read-only	The IP address of the local interface.
REM cbsVrrpRemoteBoxPathStatus	1.3.6.1.4.1.6848.2.5.4.1.6	RemoteBoxPathStatus	read-only	The path's status of the VRRP remote box.
TIK cbsVrrpRemoteBoxPathLastChangeTime	1.3.6.1.4.1.6848.2.5.4.1.7	TimeTicks	read-only	Indicates the elapsed time since the status last changed.
G32 cbsVrrpRemoteBoxPathLinkQualityEx	1.3.6.1.4.1.6848.2.5.4.1.8	Gauge32	read-only	The link quality of the remote box path.
cbsVrrpMIB	1.3.6.1.4.1.6848.3.5			XOS, Release 9.5: This MIB module defines the objects related to Crossbeam VRRP Traps.
cbsVrrpTraps	1.3.6.1.4.1.6848.4.4
NTF cbsVrrpTrapNewMaster	1.3.6.1.4.1.6848.4.4.1			The newMaster trap indicates that the sending agent transitioned to 'Master' state.
NTF cbsVrrpTrapProtoError	1.3.6.1.4.1.6848.4.4.2			The error trap indicates that the sending agent encountered the protocol error indicated by vrrpTrapProtoErrorReason.
NTF cbsVrrpTrapFailGrStatusChanged	1.3.6.1.4.1.6848.4.4.3			The StatusChanged trap indicates that failover group of the sending agent transitioned from old to new state.
NTF cbsVrrpTrapFailGrPriorityChanged	1.3.6.1.4.1.6848.4.4.4			The PriorityChanged trap indicates that priority of the sending agent's failover group changed.
NTF cbsVrrpTrapRemoteBoxPathStatusChanged	1.3.6.1.4.1.6848.4.4.5			The StatusChanged trap indicates that one path of remote box on the sending agent's transitioned from old to new state.
NTF cbsVrrpTrapRemoteBoxNoActivePath	1.3.6.1.4.1.6848.4.4.6			The trap indicates that there is no active path for the remote box.
NTF cbsVrrpTrapRemoteBoxNoSecondaryPath	1.3.6.1.4.1.6848.4.4.7			The trap indicates that there is no secondary path for the remote box that contains 2 CPMs.
NTF cbsVrrpTrapRemoteBoxNoStandbyPath	1.3.6.1.4.1.6848.4.4.8			The trap indicates that there is 1 active path but no standby path for the remote box.
NTF cbsVrrpTrapRemoteBoxPathSharedIntf	1.3.6.1.4.1.6848.4.4.9			The trap indicates that all paths of the remote box only are reachable via single local interface on the sending agent.
NTF cbsVrrpTrapNoRemoteBoxConfigured	1.3.6.1.4.1.6848.4.4.10			The trap indicates that VRRP configured but there is no remote box configured.
NTF cbsVrrpTrapOnlyOnePathDefined	1.3.6.1.4.1.6848.4.4.11			The trap indicates that the remote box configured with only one path.
NTF cbsVrrpTrapRemoteBoxRunLegacyXOS	1.3.6.1.4.1.6848.4.4.12			The trap indicates that the remote box is running legacy XOS.

RFC description

Manages VRRP (Virtual Router Redundancy Protocol) traps and failover group status on Crossbeam Systems.

Start monitoring Crossbeam Systems XOS security/networking appliances with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CBS-VRRP-MIB