CISCO-IETF-VRRP-07-MIB

All MIBs › CISCO-IETF-VRRP-07-MIB

Organization: Cisco Systems, Inc

Last Updated: 2010-02-23

Category: Cisco Devices, Routing Protocols

Description: Implements the IETF VRRP draft v7 MIB for Virtual Router Redundancy Protocol configuration and status.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-IETF-VRRP-07-MIB?

CISCO-IETF-VRRP-07-MIB implements the IETF VRRPv3 draft (version 07) MIB for Virtual Router Redundancy Protocol, supporting both IPv4 and IPv6 first-hop router redundancy on Cisco routers and switches. It exposes per-interface VRRP instance data including virtual router ID, priority, operational state, virtual MAC address, and master/primary IP addresses. This is directly useful for monitoring the operational status of redundant gateway routers, since c07vrrpOperationsState transitioning away from Master or Backup as expected, or an unexpected change in c07vrrpOperationsMasterIpAddr, signals a failover event or misconfiguration in the redundancy group. It is based on the IETF VRRP MIB draft and works alongside interface and IP address MIBs to fully identify the protected interface. It is typically deployed at the network edge or core wherever gateway redundancy is required for high availability. Engineers can download the CISCO-IETF-VRRP-07-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-IETF-VRRP-07-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco routers
Cisco Layer 3 switches

Monitoring Examples

An administrator polls c07vrrpOperationsTable (c07vrrpOperationsEntry, indexed by c07vrrpOperationsVrId) for c07vrrpOperationsState and c07vrrpOperationsPriority to confirm the expected router is currently Master; a lower-priority router unexpectedly reporting Master state indicates the primary router has failed or lost connectivity. Checking c07vrrpOperationsMasterIpAddr against c07vrrpOperationsPrimaryIpAddr confirms whether failover has occurred, and c07vrrpOperationsAddrCount verifies all expected virtual addresses are still associated with the group. c07vrrpStatistics counters help confirm whether the transition was triggered by a genuine fault or a flapping condition.

What Can Be Monitored

VRRP instance state (master/backup)
instance priority
master and primary IP addresses
virtual MAC address
virtual address count
VRRP statistics/notifications

Imported Objects

From CISCO-SMI

ciscoExperiment

OBJECT-IDENTITY

From IF-MIB

ifIndex

OBJECT-TYPE

From INET-ADDRESS-MIB

InetAddress
InetAddressType

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
RowStatus
StorageType
TEXTUAL-CONVENTION
TimeInterval
TimeStamp
TruthValue

How to Use in IPNetwork Monitor

Example using c07vrrpRouterChecksumErrors OID:

Select a Cisco routers / Layer 3 switch (VRRPv3) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type c07vrrpRouterChecksumErrors into the Find box to locate it in the OID tree, then select it and click OK. The total number of VRRP packets received with an invalid VRRP checksum value. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
IP c07vrrpAssociatedIpAddr	1.3.6.1.4.1.9.10.143.1.8.1.1	InetAddress	not-accessible	The assigned IP addresses that a virtual router is responsible for backing up.
c07vrrpAssociatedIpAddrEntry	1.3.6.1.4.1.9.10.143.1.8.1		not-accessible	An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given IP version, VrID and ifIndex will equal the number of IP addresses associated (e.g., backed up) by the virtual router (equivalent to 'vrrpOperationsIpAddrCount'). Rows in the table cannot be modified unless the value of `vrrpOperationsState' has transitioned to `initialize'.
ROW c07vrrpAssociatedIpAddrRowStatus	1.3.6.1.4.1.9.10.143.1.8.1.3	RowStatus	read-create	The row status variable, used according to installation and removal conventions for conceptual rows. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Setting this object to active(1) results in the addition of an associated address for a virtual router. Setting this object to notInService(2) results in administratively bringing down the row. Destroying the entry or setting it to destroy(6) removes the associated address from the virtual router. The use of other values is implementation-dependent. Only vrrpAssociatedStorageType can be modified when the row is in active(1) state for Implementations supporting write access to vrrpAssociatedStorageType Implementations should not allow deletion of the last row corresponding to an active row in vrrpOperationsTable. Refer to description of vrrpOperationsRowStatus for a typical row creation and deletion scenarios.
c07vrrpAssociatedIpAddrTable	1.3.6.1.4.1.9.10.143.1.8		not-accessible	The table of addresses associated with this virtual router.
STO c07vrrpAssociatedStorageType	1.3.6.1.4.1.9.10.143.1.8.1.2	StorageType	read-create	The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration.
IP c07vrrpAssoIpAddr	1.3.6.1.4.1.9.10.143.1.4.1.1	IpAddress	not-accessible	The assigned IP addresses that a virtual router is responsible for backing up. This object is deprecated in favor of the IP Version Independent object, vrrpAssociatedIpAddr.
c07vrrpAssoIpAddrEntry	1.3.6.1.4.1.9.10.143.1.4.1		not-accessible	An entry in the table contains an IP address that is associated with a virtual router. The number of rows for a given ifIndex and VrId will equal the number of IP addresses associated (e.g., backed up) by the virtual router (equivalent to 'vrrpOperIpAddrCount'). Rows in the table cannot be modified unless the value of `vrrpOperAdminState' is `disabled' and the `vrrpOperState' has transitioned to `initialize'. This object is deprecated in favor of the IP Version Independent object, vrrpAssociatedIpAddrEntry.
ROW c07vrrpAssoIpAddrRowStatus	1.3.6.1.4.1.9.10.143.1.4.1.2	RowStatus	read-create	The row status variable, used according to installation and removal conventions for conceptual rows. Setting this object to active(1) or createAndGo(4) results in the addition of an associated address for a virtual router. Destroying the entry or setting it to notInService(2) removes the associated address from the virtual router. The use of other values is implementation-dependent. This object is deprecated in favor of the IP Version Independent object, vrrpAssociatedIpAddrRowStatus.
c07vrrpAssoIpAddrTable	1.3.6.1.4.1.9.10.143.1.4		not-accessible	The table of addresses associated with this virtual router. This object is deprecated in favor of the IP Version Independent object, vrrpAssociatedIpAddrTable.
c07vrrpConformance	1.3.6.1.4.1.9.10.143.3
c07vrrpMIBCompliance	1.3.6.1.4.1.9.10.143.3.1.1			This compliance is deprecated in favour of vrrpModuleFullCompliance.
c07vrrpMIBCompliances	1.3.6.1.4.1.9.10.143.3.1
c07vrrpMIBGroups	1.3.6.1.4.1.9.10.143.3.2
c07vrrpModuleFullCompliance	1.3.6.1.4.1.9.10.143.3.1.2			The compliance statement for both VRRP for IPv4 and VRRP for IPv6 implementations.
c07vrrpModuleReadOnlyCompliance	1.3.6.1.4.1.9.10.143.3.1.3			When this MIB is implemented without support for read- create (i.e. in read-only mode), then such an implementation can claim read-only compliance. Such a device can then be monitored but can not be configured with this MIB.
INT c07vrrpNewMasterReason	1.3.6.1.4.1.9.10.143.1.9	INTEGER	accessible-for-notify	This indicates the reason for vrrpNewMaster trap. Used by vrrpTrapNewMaster trap.
I32 c07vrrpNodeVersion	1.3.6.1.4.1.9.10.143.1.1	Integer32	read-only	This value identifies the particular version of the VRRP supported by this node. This object is deprecated in the IP Version Independent MIB.
INT c07vrrpNotificationCntl	1.3.6.1.4.1.9.10.143.1.2	INTEGER	read-write	Indicates whether the VRRP-enabled router will generate SNMP notifications for events defined in this MIB. 'Enabled' results in SNMP notifications; 'disabled', no notifications are sent.
c07vrrpNotificationGroup	1.3.6.1.4.1.9.10.143.3.2.4			The VRRP MIB Notification Group.
c07vrrpNotifications	1.3.6.1.4.1.9.10.143.0
c07vrrpNotificationsGroup	1.3.6.1.4.1.9.10.143.3.2.9			The VRRP MIB Notification Group.
INT c07vrrpOperAdminState	1.3.6.1.4.1.9.10.143.1.3.1.4	INTEGER	read-create	This object will enable/disable the virtual router function. Setting the value to `up', will transition the state of the virtual router from `initialize' to `backup' or `master', depending on the value of `vrrpOperPriority'. Setting the value to `down', will transition the router from `master' or `backup' to `initialize'. State transitions may not be immediate; they sometimes depend on other factors, such as the interface (IF) state. The `vrrpOperAdminState' object must be set to `down' prior to modifying the other read-create objects in the conceptual row. The value of the `vrrpOperRowStatus' object (below) must be `active', signifying that the conceptual row is valid (i.e., the objects are correctly set), in order for this object to be set to `up'. This object is deprecated in favor of the IP Version Independent object, vrrpOperationsState.
I32 c07vrrpOperAdvertisementInterval	1.3.6.1.4.1.9.10.143.1.3.1.11	Integer32	read-create	The time interval, in seconds, between sending advertisement messages. Only the master router sends VRRP advertisements. This object is deprecated in favor of the IP Version Independent object, vrrpOperationsAdvInterval.
c07vrrpOperations	1.3.6.1.4.1.9.10.143.1
T/F c07vrrpOperationsAcceptMode	1.3.6.1.4.1.9.10.143.1.7.1.11	TruthValue	read-create	Controls whether a virtual router in Master state will accept packets addressed to the address owner's IPv6 address as its own if it is not the IPv6 address owner. Default is False. This object is not relevant for rows representing VRRP over IPv4 and should be set to false.
I32 c07vrrpOperationsAddrCount	1.3.6.1.4.1.9.10.143.1.7.1.6	Integer32	read-only	The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssociatedAddrTable that correspond to a given IP version/VRID/ifIndex.
NUM c07vrrpOperationsAdvInterval	1.3.6.1.4.1.9.10.143.1.7.1.9	TimeInterval	read-create	The time interval, in centiseconds, between sending advertisement messages. Only the master router sends VRRP advertisements.
c07vrrpOperationsEntry	1.3.6.1.4.1.9.10.143.1.7.1		not-accessible	An entry in the vrrpOperationsTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IP version, VRID and ifIndex. ifIndex represents a physical interface of the router. Note that rows in this table can be distinguished on a multi-stacked device running VRRP over IPv4 and IPv6 on the same physical interface. Rows in the table cannot be modified unless the value of 'vrrpOperationsState' has transitioned to 'initialize'
c07vrrpOperationsGroup	1.3.6.1.4.1.9.10.143.3.2.5			Conformance group for VRRP over IPv4 and IPv6 operations.
IPt c07vrrpOperationsInetAddrType	1.3.6.1.4.1.9.10.143.1.7.1.1	InetAddressType	not-accessible	The IP address type of C07VrrpOperationsEntry. This value applies to both vrrpOperationsMasterIpAddr and vrrpOperationsPrimaryIpAddr.
IP c07vrrpOperationsMasterIpAddr	1.3.6.1.4.1.9.10.143.1.7.1.7	InetAddress	read-only	The master router's real IP address. Master router would set this address to vrrpOperationsPrimaryIpAddr while transitioning to master state. For backup routers, this is the IP address listed as the source in VRRP advertisement last received by this virtual router.
T/F c07vrrpOperationsPreemptMode	1.3.6.1.4.1.9.10.143.1.7.1.10	TruthValue	read-create	Controls whether a higher priority virtual router will preempt a lower priority master.
IP c07vrrpOperationsPrimaryIpAddr	1.3.6.1.4.1.9.10.143.1.7.1.8	InetAddress	read-create	In the case where there are more than one IP Address (associated IP addresses) for a given `ifIndex', this object is used to specify the IP address that will become the vrrpOperationsMasterIpAddr', should the virtual router transition from backup state to master.
U32 c07vrrpOperationsPriority	1.3.6.1.4.1.9.10.143.1.7.1.5	Unsigned32	read-create	This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es) for VRRP over IPv4 and hence not settable. A 'badValue(3)' should be returned when a user tries to set 0 or 255 for this object.
ROW c07vrrpOperationsRowStatus	1.3.6.1.4.1.9.10.143.1.7.1.14	RowStatus	read-create	The RowStatus variable should be used in accordance to installation and removal conventions for conceptual rows. When `vrrpOperationsRowStatus' is set to active(1), no other objects in the conceptual row can be modified. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the Corresponding instance of the `vrrpOperationsRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of vrrpOperationsInetAddrType, vrrpOperationsVrId and vrrpOperationsPrimaryIpAddr has been set and there is at least one active row in the `vrrpAssociatedIpAddrTable' defining an associated IP address. notInService(2) should be used to administratively bring the row down. A typical order of operation to add a row is: 1. Create a row in vrrpOperationsTable with createAndWait(5). 2. Create one or more corresponding rows in vrrpAssociatedIpAddrTable. 3. Populate the vrrpOperationsEntry. 4. set vrrpOperationsRowStatus to active(1). A typical order of operation to delete an entry is: 1. Set vrrpOperationsRowStatus to notInService(2). 2. Set the corresponding rows in vrrpAssociatedIpAddrTable to destroy(6) to delete the entry. 3. set vrrpOperationsRowStatus to destroy(6) to delete the entry.
INT c07vrrpOperationsState	1.3.6.1.4.1.9.10.143.1.7.1.4	INTEGER	read-only	The current state of the virtual router. This object has three defined values: - `initialize', which indicates that the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router.
STO c07vrrpOperationsStorageType	1.3.6.1.4.1.9.10.143.1.7.1.13	StorageType	read-create	The storage type for this conceptual row. Write access is not required. It is optional to support nonVolatile StorageType enumeration.
c07vrrpOperationsTable	1.3.6.1.4.1.9.10.143.1.7		not-accessible	Unified Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpOperationsEntry' items which describe the operational characteristics of a virtual router.
TIM c07vrrpOperationsUpTime	1.3.6.1.4.1.9.10.143.1.7.1.12	TimeStamp	read-only	This is the value of the `sysUpTime' object when this virtual router (i.e., the `vrrpOperationsState') transitioned out of `initialized'.
MAC c07vrrpOperationsVirtualMacAddr	1.3.6.1.4.1.9.10.143.1.7.1.3	MacAddress	read-only	The virtual MAC address of the virtual router. Although this object can be derived from the 'vrrpOperationsVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP notifications.
C07 c07vrrpOperationsVrId	1.3.6.1.4.1.9.10.143.1.7.1.2	C07VrId	not-accessible	This object contains the Virtual Router Identifier (VRID).
OCT c07vrrpOperAuthKey	1.3.6.1.4.1.9.10.143.1.3.1.10	OCTET STRING	read-create	The Authentication Key. This object is set according to the value of the 'vrrpOperAuthType' object ('simpleTextPassword' or 'ipAuthenticationHeader'). If the length of the value is less than 16 octets, the agent will left adjust and zero fill to 16 octets. The value of this object is the same for a given ifIndex. When read, vrrpOperAuthKey always returns an Octet String of length zero. This object is deprecated in the IP Version MIB.
INT c07vrrpOperAuthType	1.3.6.1.4.1.9.10.143.1.3.1.9	INTEGER	read-create	Authentication type used for VRRP protocol exchanges between virtual routers. This value of this object is the same for a given ifIndex. New enumerations to this list can only be added via a new RFC on the standards track. This object is deprecated in the IP Version MIB.
c07vrrpOperEntry	1.3.6.1.4.1.9.10.143.1.3.1		not-accessible	An entry in the vrrpOperTable containing the operational characteristics of a virtual router. On a VRRP router, a given virtual router is identified by a combination of the IF index and VRID. Rows in the table cannot be modified unless the value of `vrrpOperAdminState' is `disabled' and the `vrrpOperState' has transitioned to `initialize'. This object is deprecated in favor of the IP Version independent object, vrrpOperationsEntry
c07vrrpOperGroup	1.3.6.1.4.1.9.10.143.3.2.1			Conformance group for VRRP operations.
I32 c07vrrpOperIpAddrCount	1.3.6.1.4.1.9.10.143.1.3.1.6	Integer32	read-only	The number of IP addresses that are associated with this virtual router. This number is equal to the number of rows in the vrrpAssoIpAddrTable that correspond to a given IF index/VRID pair. This object is deprecated in favor of the IP Version Independent object, vrrpOperationsAddrCount.
IP c07vrrpOperMasterIpAddr	1.3.6.1.4.1.9.10.143.1.3.1.7	IpAddress	read-only	The master router's real (primary) IP address. This is the IP address listed as the source in VRRP advertisement last received by this virtual router. This object is deprecated in favor of the IP Version Independent object, vrrpOperationsMasterIpAddr.
T/F c07vrrpOperPreemptMode	1.3.6.1.4.1.9.10.143.1.3.1.12	TruthValue	read-create	Controls whether a higher priority virtual router will preempt a lower priority master. This object is deprecated in favor of the IP Version Independent object, vrrpOperationsPreemptMode.
IP c07vrrpOperPrimaryIpAddr	1.3.6.1.4.1.9.10.143.1.3.1.8	IpAddress	read-create	In the case where there is more than one IP address for a given `ifIndex', this object is used to specify the IP address that will become the `vrrpOperMasterIpAddr', should the virtual router transition from backup to master. If this object is set to 0.0.0.0, the IP address which is numerically lowest (of all the associated IP address for the interface) will be selected. This object is deprecated in favor of the IP Version Independent object, vrrpOperationsPrimaryIpAddr.
I32 c07vrrpOperPriority	1.3.6.1.4.1.9.10.143.1.3.1.5	Integer32	read-create	This object specifies the priority to be used for the virtual router master election process. Higher values imply higher priority. A priority of '0', although not settable, is sent by the master router to indicate that this router has ceased to participate in VRRP and a backup virtual router should transition to become a new master. A priority of 255 is used for the router that owns the associated IP address(es). This object is deprecated in favor of the IP Version Independent object, vrrpOperationsPriority.
INT c07vrrpOperProtocol	1.3.6.1.4.1.9.10.143.1.3.1.14	INTEGER	read-create	The particular protocol being controlled by this Virtual Router. New enumerations to this list can only be added via a new RFC on the standards track. This object is deprecated in the IP Version Independent MIB.
ROW c07vrrpOperRowStatus	1.3.6.1.4.1.9.10.143.1.3.1.15	RowStatus	read-create	The row status variable, used in accordance to installation and removal conventions for conceptual rows. The rowstatus of a currently active row in the vrrpOperTable is constrained by the operational state of the corresponding virtual router. When `vrrpOperRowStatus' is set to active(1), no other objects in the conceptual row, with the exception of `vrrpOperAdminState', can be modified. Prior to setting the `vrrpOperRowStatus' object from `active' to a different value, the `vrrpOperAdminState' object must be set to `down' and the `vrrpOperState' object be transitioned to `initialize'. To create a row in this table, a manager sets this object to either createAndGo(4) or createAndWait(5). Until instances of all corresponding columns are appropriately configured, the value of the corresponding instance of the `vrrpOperRowStatus' column will be read as notReady(3). In particular, a newly created row cannot be made active(1) until (minimally) the corresponding instance of `vrrpOperVrId' has been set and there is at least one active row in the `vrrpAssoIpAddrTable' defining an associated IP address for the virtual router. This object is deprecated in favor of the IP Version Independent object, vrrpOperationsRowStatus.
INT c07vrrpOperState	1.3.6.1.4.1.9.10.143.1.3.1.3	INTEGER	read-only	The current state of the virtual router. This object has three defined values: - `initialize', which indicates that all the virtual router is waiting for a startup event. - `backup', which indicates the virtual router is monitoring the availability of the master router. - `master', which indicates that the virtual router is forwarding packets for IP addresses that are associated with this router. Setting the `vrrpOperAdminState' object (below) initiates transitions in the value of this object. This object is deprecated in favor of the IP Version Independent object, vrrpOperationsState.
c07vrrpOperTable	1.3.6.1.4.1.9.10.143.1.3		not-accessible	Operations table for a VRRP router which consists of a sequence (i.e., one or more conceptual rows) of 'vrrpOperEntry' items. This table has been deprecated as a new IP version neutral 'vrrpOperationsTable' has been added.
MAC c07vrrpOperVirtualMacAddr	1.3.6.1.4.1.9.10.143.1.3.1.2	MacAddress	read-only	The virtual MAC address of the virtual router. Although this object can be derived from the 'vrrpOperVrId' object, it is defined so that it is easily obtainable by a management application and can be included in VRRP-related SNMP traps. This object is deprecated in favor of the IP Version Independent object, vrrpOperationsVirtualMacAddr.
TIM c07vrrpOperVirtualRouterUpTime	1.3.6.1.4.1.9.10.143.1.3.1.13	TimeStamp	read-only	This is the value of the `sysUpTime' object when this virtual router (i.e., the `vrrpOperState') transitioned out of `initialized'. This object is deprecated in favor of the IP Version Independent object, vrrpOperationsUpTime.
C07 c07vrrpOperVrId	1.3.6.1.4.1.9.10.143.1.3.1.1	C07VrId	not-accessible	This object contains the Virtual Router Identifier (VRID). This object is deprecated in favor of the IP Version independent object, vrrpOperationsVrId
C32 c07vrrpRouterChecksumErrorsEx	1.3.6.1.4.1.9.10.143.2.1	Counter32	read-only	The total number of VRRP packets received with an invalid VRRP checksum value.
c07vrrpRouterStatisticsEntry	1.3.6.1.4.1.9.10.143.2.5.1		not-accessible	An entry in the table, containing statistics information about a given virtual router.
c07vrrpRouterStatisticsTable	1.3.6.1.4.1.9.10.143.2.5		not-accessible	Table of virtual router statistics.
c07vrrpRouterStatsEntry	1.3.6.1.4.1.9.10.143.2.4.1		not-accessible	An entry in the table, containing statistics information about a given virtual router. This object is deprecated in favor of the IP Version Independent object, vrrpRouterStatisticsEntry.
c07vrrpRouterStatsTable	1.3.6.1.4.1.9.10.143.2.4		not-accessible	Table of virtual router statistics. This object is deprecated in favor of the IP Version Independent object, vrrpRouterStatisticsTable.
C32 c07vrrpRouterVersionErrors	1.3.6.1.4.1.9.10.143.2.2	Counter32	read-only	The total number of VRRP packets received with an unknown or unsupported version number.
C32 c07vrrpRouterVrIdErrors	1.3.6.1.4.1.9.10.143.2.3	Counter32	read-only	The total number of VRRP packets received with an invalid VRID for this virtual router.
c07vrrpStatistics	1.3.6.1.4.1.9.10.143.2
C32 c07vrrpStatisticsAddressListErrors	1.3.6.1.4.1.9.10.143.2.5.1.8	Counter32	read-only	The total number of packets received for which the address list does not match the locally configured list for the virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpStatisticsDiscontinuityTime.
C32 c07vrrpStatisticsAdvIntervalErrors	1.3.6.1.4.1.9.10.143.2.5.1.3	Counter32	read-only	The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpStatisticsDiscontinuityTime.
TIM c07vrrpStatisticsDiscontinuityTime	1.3.6.1.4.1.9.10.143.2.5.1.11	TimeStamp	read-only	The value of sysUpTime on the most recent occasion at which any one or more of this entry's counters suffered a discontinuity. If no such discontinuities have occurred since the last re-initialization of the local management subsystem, then this object contains a zero value.
c07vrrpStatisticsGroup	1.3.6.1.4.1.9.10.143.3.2.6			Conformance group for VRRP over IPv4 and IPv6 statistics.
C32 c07vrrpStatisticsIpTtlErrors	1.3.6.1.4.1.9.10.143.2.5.1.4	Counter32	read-only	The total number of VRRP packets received by the Virtual router with IPv4 TTL (for VRRP over IPv4) or IPv6 Hop Limit (for VRRP over IPv6) not equal to 255. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpStatisticsDiscontinuityTime.
C32 c07vrrpStatisticsMasterTransitions	1.3.6.1.4.1.9.10.143.2.5.1.1	Counter32	read-only	The total number of times that this virtual router's state has transitioned to MASTER. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpStatisticsDiscontinuityTime.
C32 c07vrrpStatisticsPacketLengthErrors	1.3.6.1.4.1.9.10.143.2.5.1.9	Counter32	read-only	The total number of packets received with a packet length less than the length of the VRRP header. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpStatisticsDiscontinuityTime.
C32 c07vrrpStatisticsRcvdAdvertisements	1.3.6.1.4.1.9.10.143.2.5.1.2	Counter32	read-only	The total number of VRRP advertisements received by this virtual router. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpStatisticsDiscontinuityTime.
C32 c07vrrpStatisticsRcvdInvalidAuthentications	1.3.6.1.4.1.9.10.143.2.5.1.10	Counter32	read-only	The total number of packets received with an unknown authentication type.
C32 c07vrrpStatisticsRcvdInvalidTypePkts	1.3.6.1.4.1.9.10.143.2.5.1.7	Counter32	read-only	The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpStatisticsDiscontinuityTime.
C32 c07vrrpStatisticsRcvdPriZeroPackets	1.3.6.1.4.1.9.10.143.2.5.1.5	Counter32	read-only	The total number of VRRP packets received by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpStatisticsDiscontinuityTime.
U32 c07vrrpStatisticsRefreshRate	1.3.6.1.4.1.9.10.143.2.5.1.12	Unsigned32	read-only	The minimum reasonable polling interval for this entry. This object provides an indication of the minimum Amount of time required to update the counters in this entry.
C32 c07vrrpStatisticsSentPriZeroPackets	1.3.6.1.4.1.9.10.143.2.5.1.6	Counter32	read-only	The total number of VRRP packets sent by the virtual router with a priority of '0'. Discontinuities in the value of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of vrrpStatisticsDiscontinuityTime.
C32 c07vrrpStatsAddressListErrors	1.3.6.1.4.1.9.10.143.2.4.1.9	Counter32	read-only	The total number of packets received for which the address list does not match the locally configured list for the virtual router. This object is deprecated in favor of the IP Version Independent object, vrrpStatisticsAddressListErrors.
C32 c07vrrpStatsAdvertiseIntervalErrors	1.3.6.1.4.1.9.10.143.2.4.1.3	Counter32	read-only	The total number of VRRP advertisement packets received for which the advertisement interval is different than the one configured for the local virtual router. This object is deprecated in favor of the IP Version Independent object, vrrpStatisticsAdvIntervalErrors.
C32 c07vrrpStatsAdvertiseRcvd	1.3.6.1.4.1.9.10.143.2.4.1.2	Counter32	read-only	The total number of VRRP advertisements received by this virtual router. This object is deprecated in favor of the IP Version Independent object, vrrpStatisticsRcvdAdvertisements.
C32 c07vrrpStatsAuthFailures	1.3.6.1.4.1.9.10.143.2.4.1.4	Counter32	read-only	The total number of VRRP packets received that do not pass the authentication check. This object is deprecated in the IP Version MIB.
C32 c07vrrpStatsAuthTypeMismatch	1.3.6.1.4.1.9.10.143.2.4.1.11	Counter32	read-only	The total number of packets received with 'Auth Type' not equal to the locally configured authentication method (`vrrpOperAuthType'). This object is deprecated in favor of the IP Version Independent object, vrrpStatisticsRcvdInvalidAuthentications.
C32 c07vrrpStatsBecomeMaster	1.3.6.1.4.1.9.10.143.2.4.1.1	Counter32	read-only	The total number of times that this virtual router's state has transitioned to MASTER. This object is deprecated in favor of the IP Version Independent object, vrrpStatisticsMasterTransitions.
c07vrrpStatsGroup	1.3.6.1.4.1.9.10.143.3.2.2			Conformance group for VRRP statistics.
C32 c07vrrpStatsInvalidAuthType	1.3.6.1.4.1.9.10.143.2.4.1.10	Counter32	read-only	The total number of packets received with an unknown authentication type. This object is deprecated in favor of the IP Version Independent object, vrrpStatisticsPacketLengthErrors.
C32 c07vrrpStatsInvalidTypePktsRcvd	1.3.6.1.4.1.9.10.143.2.4.1.8	Counter32	read-only	The number of VRRP packets received by the virtual router with an invalid value in the 'type' field. This object is deprecated in favor of the IP Version Independent object, vrrpStatisticsRcvdInvalidTypePkts.
C32 c07vrrpStatsIpTtlErrors	1.3.6.1.4.1.9.10.143.2.4.1.5	Counter32	read-only	The total number of VRRP packets received by the virtual router with IP TTL (Time-To-Live) not equal to 255. This object is deprecated in favor of the IP Version Independent object, vrrpStatisticsIpTtlErrors.
C32 c07vrrpStatsPacketLengthErrors	1.3.6.1.4.1.9.10.143.2.4.1.12	Counter32	read-only	The total number of packets received with a packet length less than the length of the VRRP header. This object is deprecated in favor of the IP Version Independent object, vrrpStatisticsPacketLengthErrors.
C32 c07vrrpStatsPriorityZeroPktsRcvd	1.3.6.1.4.1.9.10.143.2.4.1.6	Counter32	read-only	The total number of VRRP packets received by the virtual router with a priority of '0'. This object is deprecated in favor of the IP Version Independent object, vrrpStatisticsRcvdPriZeroPackets.
C32 c07vrrpStatsPriorityZeroPktsSent	1.3.6.1.4.1.9.10.143.2.4.1.7	Counter32	read-only	The total number of VRRP packets sent by the virtual router with a priority of '0'. This object is deprecated in favor of the IP Version Independent object, vrrpStatisticsSentPriZeroPackets.
INT c07vrrpTrapAuthErrorType	1.3.6.1.4.1.9.10.143.1.6	INTEGER	accessible-for-notify	Potential types of configuration conflicts. Used by vrrpAuthFailure trap. This object is deprecated in the IP Version MIB.
NTF c07vrrpTrapAuthFailure	1.3.6.1.4.1.9.10.143.0.2			A vrrpAuthFailure trap signifies that a packet has been received from a router whose authentication key or authentication type conflicts with this router's authentication key or authentication type. Implementation of this trap is optional. This object is has been deprecated.
c07vrrpTrapGroup	1.3.6.1.4.1.9.10.143.3.2.3			Conformance group for objects contained in VRRP notifications.
c07vrrpTrapInfoGroup	1.3.6.1.4.1.9.10.143.3.2.8			Conformance group for objects contained in VRRP notifications.
NTF c07vrrpTrapNewMaster	1.3.6.1.4.1.9.10.143.0.1			The newMaster trap indicates that the sending agent has transitioned to 'Master' state.
INT c07vrrpTrapNewMasterCntl	1.3.6.1.4.1.9.10.143.1.11	INTEGER	read-write	Controls whether the VRRP-enabled router should Generate vrrpTrapNewMaster notification. 'Enabled' results in vrrpTrapNewMaster notifications; 'disabled', results in no vrrpTrapNewMaster notifications.
IP c07vrrpTrapPacketSrc	1.3.6.1.4.1.9.10.143.1.5	IpAddress	accessible-for-notify	The IP address of an inbound VRRP packet. Used by vrrpTrapAuthFailure trap. This object is deprecated in the IP Version MIB.
NTF c07vrrpTrapProtoError	1.3.6.1.4.1.9.10.143.0.3			The error trap indicates that the sending agent has encountered the protocol error indicated by vrrpTrapProtoErrorReason.
INT c07vrrpTrapProtoErrorCntl	1.3.6.1.4.1.9.10.143.1.12	INTEGER	read-write	Controls whether the VRRP-enabled router should generate vrrpTrapProtoError notification. 'Enabled' results in vrrpTrapProtoError notifications; 'disabled', results in no vrrpTrapProtoError notifications.
INT c07vrrpTrapProtoErrReason	1.3.6.1.4.1.9.10.143.1.10	INTEGER	accessible-for-notify	This indicates the reason for protocol error trap. Used by vrrpTrapProtoError trap.
ciscoVrrp07MIB	1.3.6.1.4.1.9.10.143			This MIB describes objects used for managing Virtual Router Redundancy Protocol version 3 (VRRPv3) for IPv4 and IPv6. This MIB supports VRRP for IPv4 and IPv6 protocols simultaneously running on a given interface of a router. Copyright (C) The Internet Society (2009).

RFC description

Cisco Virtual Router Redundancy Protocol version 3 for IPv4 and IPv6 router management.

Start monitoring Cisco routers / Layer 3 switches (VRRPv3) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-IETF-VRRP-07-MIB