CIE1000-LACP-MIB

All MIBs › CIE1000-LACP-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2014-11-14

Category: Cisco Devices, Network Interfaces, Wireless and WLAN

Description: Manages IEEE 802.3ad LACP (Link Aggregation Control Protocol) configuration and partner status on Cisco IE1000 industrial switches.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CIE1000-LACP-MIB?

CIE1000-LACP-MIB manages IEEE 802.3ad Link Aggregation Control Protocol (LACP) configuration and partner status on Cisco IE1000 industrial Ethernet switches, used to bundle multiple physical links into a resilient logical trunk. It exposes per-port LACP configuration (aggregation admin mode, actor admin key, port role, timeout, port priority) as well as system-level aggregation priority and per-interface LACP status objects. Its monitoring focus is link-aggregation health: administrators check whether LACP is enabled and correctly negotiated on each member port, since a mismatch in actor/partner keys or an unexpected role change can silently drop a link out of the aggregate, reducing available bandwidth or causing a loop. It is explicitly a private implementation of the standard IEEE 802.3ad Link Aggregation MIB, so it mirrors that standard's object model. It is deployed on Cisco IE1000 industrial Ethernet switches in factory automation and utility networks requiring redundant uplinks. Engineers can download the CIE1000-LACP-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CIE1000-LACP-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco IE1000 industrial Ethernet switch

Monitoring Examples

An administrator would poll cie1000LacpConfigPortTable/cie1000LacpConfigPortEntry, keyed by cie1000LacpConfigPortInterfaceNo, checking cie1000LacpConfigPortDot3adAggrActorAdminMode and cie1000LacpConfigPortDot3adAggrActorAdminKey to confirm a port is configured for aggregation with the correct key, alongside cie1000LacpConfigPortDot3adAggrRole and cie1000LacpConfigPortDot3adAggrTimeout. cie1000LacpStatusSystemTable/cie1000LacpStatusSystemEntry, keyed by cie1000LacpStatusSystemInterfaceNo, would reveal actual negotiated aggregation status, and a port whose key or role doesn't match its intended peers indicates it has silently fallen out of the LACP bundle. cie1000LacpConfigGlobalsDot3adAggrSystemPriority is checked when troubleshooting which switch wins LACP negotiation priority.

What Can Be Monitored

per-port LACP admin mode
LACP actor key/port role
LACP timeout setting
LACP system aggregation priority
aggregate link negotiation status

Imported Objects

From CIE1000-TC

CIE1000InterfaceIndex
CIE1000PortList
CIE1000Unsigned16
CIE1000Unsigned8

From CISCO-IE1000-MIB

cie1000SwitchMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Counter64
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

MacAddress
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using cie1000LacpStatisticsPortDot3adAggrRxFrames OID:

Select a Cisco IE1000 industrial Ethernet switch as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cie1000LacpStatisticsPortDot3adAggrRxFrames into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. Shows received LACP frame count. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
cie1000LacpMib	1.3.6.1.4.1.9.9.832.1.35			This is a private version of the IEEE802.3ad LAG MIB
cie1000LacpMibObjects	1.3.6.1.4.1.9.9.832.1.35.1
cie1000LacpConfig	1.3.6.1.4.1.9.9.832.1.35.1.2
cie1000LacpConfigPortTable	1.3.6.1.4.1.9.9.832.1.35.1.2.1		not-accessible	This is a table of the LACP port configurations
cie1000LacpConfigPortEntry	1.3.6.1.4.1.9.9.832.1.35.1.2.1.1		not-accessible	Each port has a set of parameters
NUM cie1000LacpConfigPortInterfaceNo	1.3.6.1.4.1.9.9.832.1.35.1.2.1.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
T/F cie1000LacpConfigPortDot3adAggrActorAdminMode	1.3.6.1.4.1.9.9.832.1.35.1.2.1.1.2	TruthValue	read-write	Control whether port is LACP enabled(1) or disabled(0).
U32 cie1000LacpConfigPortDot3adAggrActorAdminKey	1.3.6.1.4.1.9.9.832.1.35.1.2.1.1.3	Unsigned32	read-write	The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit, read-write value. The meaning of particular Key values is of local significance
T/F cie1000LacpConfigPortDot3adAggrRole	1.3.6.1.4.1.9.9.832.1.35.1.2.1.1.4	TruthValue	read-write	The Role shows the LACP activity status. The Active(true) will transmit LACP packets each second, while Passive(false) will wait for a LACP packet from a partner
T/F cie1000LacpConfigPortDot3adAggrTimeout	1.3.6.1.4.1.9.9.832.1.35.1.2.1.1.5	TruthValue	read-write	The Timeout controls the period between BPDU transmissions. Fast(true) will transmit LACP packets each second, while Slow(0) will wait for 30 seconds before sending a LACP packet.
U32 cie1000LacpConfigPortDot3adAggrPortPriority	1.3.6.1.4.1.9.9.832.1.35.1.2.1.1.6	Unsigned32	read-write	The Port Priority controls the priority of the port. If the LACP partner wants to form a larger group than is supported by this device then this parameter will control which ports will be active and which ports will be in a backup role. Lower number means greater priority.
cie1000LacpConfigGlobals	1.3.6.1.4.1.9.9.832.1.35.1.2.2
U32 cie1000LacpConfigGlobalsDot3adAggrSystemPriority	1.3.6.1.4.1.9.9.832.1.35.1.2.2.1	Unsigned32	read-write	LACP system priority is a value.
cie1000LacpStatus	1.3.6.1.4.1.9.9.832.1.35.1.3
cie1000LacpStatusSystemTable	1.3.6.1.4.1.9.9.832.1.35.1.3.1		not-accessible	This is a table of the LACP system status
cie1000LacpStatusSystemEntry	1.3.6.1.4.1.9.9.832.1.35.1.3.1.1		not-accessible	Each lag has a set of parameters
NUM cie1000LacpStatusSystemInterfaceNo	1.3.6.1.4.1.9.9.832.1.35.1.3.1.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
CIE cie1000LacpStatusSystemDot3adAggrID	1.3.6.1.4.1.9.9.832.1.35.1.3.1.1.2	CIE1000Unsigned16	read-only	The aggregation ID for a particular link aggregation group.
MAC cie1000LacpStatusSystemDot3adAggrPartnerSystemID	1.3.6.1.4.1.9.9.832.1.35.1.3.1.1.3	MacAddress	read-only	The system ID (MAC address) of the aggregation partner.
CIE cie1000LacpStatusSystemDot3adAggrPartnerOperKey	1.3.6.1.4.1.9.9.832.1.35.1.3.1.1.4	CIE1000Unsigned16	read-only	The Key that the partner has assigned to this aggregation ID.
CIE cie1000LacpStatusSystemDot3adAggrPartnerOperSystemPriority	1.3.6.1.4.1.9.9.832.1.35.1.3.1.1.5	CIE1000Unsigned16	read-only	A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the manually configured value carried in aAggPortPartnerAdminSystemPriority if there is no protocol Partner.
U32 cie1000LacpStatusSystemDot3adAggrPartnerStateLastChanged	1.3.6.1.4.1.9.9.832.1.35.1.3.1.1.6	Unsigned32	read-only	The time in second since this aggregation changed
CIE cie1000LacpStatusSystemDot3adAggrLocalPorts	1.3.6.1.4.1.9.9.832.1.35.1.3.1.1.7	CIE1000PortList	read-only	Local port list
cie1000LacpStatusPortTable	1.3.6.1.4.1.9.9.832.1.35.1.3.2		not-accessible	This is a table of the LACP port status
cie1000LacpStatusPortEntry	1.3.6.1.4.1.9.9.832.1.35.1.3.2.1		not-accessible	Each port has a set of parameters
NUM cie1000LacpStatusPortInterfaceNo	1.3.6.1.4.1.9.9.832.1.35.1.3.2.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
T/F cie1000LacpStatusPortDot3adAggrActorAdminMode	1.3.6.1.4.1.9.9.832.1.35.1.3.2.1.2	TruthValue	read-only	Shows the current Admin mode of port, if LACP enabled then returns true else returns false.
CIE cie1000LacpStatusPortDot3adAggrActorAdminKey	1.3.6.1.4.1.9.9.832.1.35.1.3.2.1.3	CIE1000Unsigned16	read-only	Shows the current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed in 43.6.2. This is a 16-bit, read-write value. The meaning of particular Key values is of local significance
CIE cie1000LacpStatusPortDot3adAggrPartnerOperPortIndex	1.3.6.1.4.1.9.9.832.1.35.1.3.2.1.4	CIE1000Unsigned8	read-only	Shows the port index of the partner port connected to this port.
CIE cie1000LacpStatusPortDot3adAggrPartnerOperPortPriority	1.3.6.1.4.1.9.9.832.1.35.1.3.2.1.5	CIE1000Unsigned16	read-only	Shows the port priority of the port partner port connected to this port.
cie1000LacpControl	1.3.6.1.4.1.9.9.832.1.35.1.4
cie1000LacpControlPortStatsClearTable	1.3.6.1.4.1.9.9.832.1.35.1.4.1		not-accessible	This is a table to clear LACP port statistics
cie1000LacpControlPortStatsClearEntry	1.3.6.1.4.1.9.9.832.1.35.1.4.1.1		not-accessible	Each port has a set of parameters
NUM cie1000LacpControlPortStatsClearInterfaceNo	1.3.6.1.4.1.9.9.832.1.35.1.4.1.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
T/F cie1000LacpControlPortStatsClearPortStatisticsClear	1.3.6.1.4.1.9.9.832.1.35.1.4.1.1.2	TruthValue	read-write	Set to true to clear the statistics of a port.
cie1000LacpStatistics	1.3.6.1.4.1.9.9.832.1.35.1.5
cie1000LacpStatisticsPortTable	1.3.6.1.4.1.9.9.832.1.35.1.5.3		not-accessible	This is a table of the LACP port statistics
cie1000LacpStatisticsPortEntry	1.3.6.1.4.1.9.9.832.1.35.1.5.3.1		not-accessible	Each port has a set of parameters
NUM cie1000LacpStatisticsPortInterfaceNo	1.3.6.1.4.1.9.9.832.1.35.1.5.3.1.1	CIE1000InterfaceIndex	accessible-for-notify	Logical interface number.
C64 cie1000LacpStatisticsPortDot3adAggrRxFramesEx	1.3.6.1.4.1.9.9.832.1.35.1.5.3.1.2	Counter64	read-only	Shows received LACP frame count.
C64 cie1000LacpStatisticsPortDot3adAggrTxFrames	1.3.6.1.4.1.9.9.832.1.35.1.5.3.1.3	Counter64	read-only	Shows transmitted LACP frame count.
C64 cie1000LacpStatisticsPortDot3adAggrRxIllegalFrames	1.3.6.1.4.1.9.9.832.1.35.1.5.3.1.4	Counter64	read-only	Shows recevied illegal LACP frame count.
C64 cie1000LacpStatisticsPortDot3adAggrRxUnknownFrames	1.3.6.1.4.1.9.9.832.1.35.1.5.3.1.5	Counter64	read-only	Shows recevied unknown LACP frame count.
cie1000LacpMibConformance	1.3.6.1.4.1.9.9.832.1.35.2
cie1000LacpMibCompliances	1.3.6.1.4.1.9.9.832.1.35.2.1
cie1000LacpMibCompliance	1.3.6.1.4.1.9.9.832.1.35.2.1.1			The compliance statement for the implementation.
cie1000LacpMibGroups	1.3.6.1.4.1.9.9.832.1.35.2.2
cie1000LacpConfigPortTableInfoGroup	1.3.6.1.4.1.9.9.832.1.35.2.2.1			A collection of objects.
cie1000LacpConfigGlobalsInfoGroup	1.3.6.1.4.1.9.9.832.1.35.2.2.2			A collection of objects.
cie1000LacpStatusSystemTableInfoGroup	1.3.6.1.4.1.9.9.832.1.35.2.2.3			A collection of objects.
cie1000LacpStatusPortTableInfoGroup	1.3.6.1.4.1.9.9.832.1.35.2.2.4			A collection of objects.
cie1000LacpControlPortStatsClearTableInfoGroup	1.3.6.1.4.1.9.9.832.1.35.2.2.5			A collection of objects.
cie1000LacpStatisticsPortTableInfoGroup	1.3.6.1.4.1.9.9.832.1.35.2.2.6			A collection of objects.

RFC description

Manages IEEE 802.3ad LACP (Link Aggregation Control Protocol) on Cisco IE1000 switches.

Start monitoring Cisco IE1000 industrial Ethernet switch with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CIE1000-LACP-MIB