All MIBs › CISCO-LWAPP-MOBILITY-EXT-MIB
Organization: Cisco Systems Inc.
Last Updated: 2020-11-04
Category: Cisco Devices, Wireless and WLAN
Description: Provides extended mobility management objects for Cisco wireless controllers including new mobility architecture.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCO-LWAPP-MOBILITY-EXT-MIB?
CISCO-LWAPP-MOBILITY-EXT-MIB extends Cisco's wireless LAN controller mobility management to cover mobility oracle / mobility controller (MC/MO) architecture used with Lightweight Access Point Protocol (LWAPP)-based wireless networks, enabling clients to roam seamlessly across access points and controllers. It exposes configuration and status objects for mobility controller and mobility oracle enable/admin states, multicast mode for mobility messaging, keepalive timing, DSCP marking, and public address configuration for MC/MO communication, plus license usage tracking. Its monitoring value centers on wireless infrastructure software/service status and licensing: administrators check cLMobilityExtMCEnableStatus and cLMobilityExtMCMOEnableStatus against their admin counterparts to confirm the mobility feature is actually running as configured, monitor cLMobilityExtMCKeepAliveCount/Interval to detect mobility peer connectivity issues, and track cLMobilityExtMCApCountLicensesInUse against the licensed capacity to catch AP license exhaustion before it blocks new access point joins. It depends on the broader Cisco LWAPP wireless controller MIB family (CISCO-LWAPP-* MIBs) for base controller and AP data that this module extends. It is typically deployed on Cisco Wireless LAN Controllers (WLCs) in enterprise campus wireless deployments requiring inter-controller client roaming, where the CISCO-LWAPP-MOBILITY-EXT-MIB MIB supplies the objects needed to monitor mobility and licensing status.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-LWAPP-MOBILITY-EXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco Wireless LAN Controllers (WLC) using LWAPP/mobility architecture
Monitoring Examples
An operator would check cLMobilityExtMCEnableStatus versus cLMobilityExtMCAdminEnableStatus to confirm the mobility controller feature is operationally enabled as configured, and monitor cLMobilityExtMCKeepAliveCount and cLMobilityExtMCKeepAliveInterval to detect missed keepalives with mobility peers, which would indicate a peer controller has become unreachable and could disrupt client roaming. Tracking cLMobilityExtMCApCountLicensesInUse against the license limit would reveal when a controller is approaching its AP license ceiling, preventing additional APs from registering.
What Can Be Monitored
- mobility controller/oracle enable status
- keepalive count and interval to mobility peers
- multicast mode for mobility messaging
- DSCP marking for mobility traffic
- AP count license usage
This MIB depends on
Related MIBs
Imported Objects
From CISCO-LWAPP-WLAN-MIB
| cLWlanIndex | OBJECT-TYPE |
| cLWlanProfileName | OBJECT-TYPE |
From CISCO-LWAPP-WLAN-POLICY-MIB
| cLWlanWlanPolicyName | OBJECT-TYPE |
From CISCO-QOS-PIB-MIB
| Dscp |
From CISCO-SMI
| ciscoMgmt | OBJECT-IDENTITY |
From INET-ADDRESS-MIB
| InetAddress | |
| InetAddressType |
From Q-BRIDGE-MIB
| VlanIndex |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| NOTIFICATION-GROUP | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| MODULE-IDENTITY | |
| NOTIFICATION-TYPE | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| DateAndTime | |
| MacAddress | |
| RowStatus | |
| StorageType | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using cLMobilityExtMCReceivedTotal OID:
Select a Cisco Wireless LAN Controller (LWAPP-based) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cLMobilityExtMCReceivedTotal into the Find box to locate it in the OID tree, then select it and click OK. This object indicates the total number of mobility control messages received by the Mobility Controller. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| NTF ciscoLwappMobilityControlPathDown | 1.3.6.1.4.1.9.9.846.0.1 | This notification is sent by the agent when a mobility control path goes down. | ||
| NTF ciscoLwappMobilityControlPathUp | 1.3.6.1.4.1.9.9.846.0.2 | This notification is sent by the agent when a mobility control path goes up. | ||
| NTF ciscoLwappMobilityDataPathDown | 1.3.6.1.4.1.9.9.846.0.3 | This notification is sent by the agent when a mobility data path goes down. | ||
| NTF ciscoLwappMobilityDataPathUp | 1.3.6.1.4.1.9.9.846.0.4 | This notification is sent by the agent when a mobility data path goes up. | ||
| ciscoLwappMobilityExtGlobalObjects | 1.3.6.1.4.1.9.9.846.1.1 | |||
| ciscoLwappMobilityExtGlobalStats | 1.3.6.1.4.1.9.9.846.1.1.6 | |||
| ciscoLwappMobilityExtMAGlobalObjects | 1.3.6.1.4.1.9.9.846.1.1.3 | |||
| ciscoLwappMobilityExtMAStats | 1.3.6.1.4.1.9.9.846.1.1.5 | |||
| ciscoLwappMobilityExtMCGlobalObjects | 1.3.6.1.4.1.9.9.846.1.1.1 | |||
| ciscoLwappMobilityExtMCMAGlobalObjects | 1.3.6.1.4.1.9.9.846.1.1.2 | |||
| ciscoLwappMobilityExtMCMAStatsGroup | 1.3.6.1.4.1.9.9.846.2.2.6 | This object represents the current status of the encryption in the mobilty tunnel. | ||
| ciscoLwappMobilityExtMCStats | 1.3.6.1.4.1.9.9.846.1.1.4 | |||
| ciscoLwappMobilityExtMIB | 1.3.6.1.4.1.9.9.846 | This MIB is intended to be implemented on all those devices operating as Central Controllers (CC) that terminate the Light Weight Access Point Protocol tunnel from Light-weight LWAPP Access Points. This MIB provides configuration and status information about the 802.11 WLAN mobility. The relationship between CC and the LWAPP APs can be depicted as follows: +......+ +......+ +......+ +......+ + + + + + + + + + CC + + CC + + CC + + CC + + + + + + + + + +......+ +......+ +......+ +......+ .. . . . .. . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + AP + + AP + + AP + + AP + + AP + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ . . . . . . . . . . . . . . . . . . . . . . . . +......+ +......+ +......+ +......+ +......+ + + + + + + + + + + + MN + + MN + + MN + + MN + + MN + + + + + + + + + + + +......+ +......+ +......+ +......+ +......+ The LWAPP tunnel exists between the controller and the APs. The MNs communicate with the APs through the protocol defined by the 802.11 standard. LWAPP APs, upon bootup, discover and join one of the controllers and the controller pushes the configuration, that includes the WLAN parameters, to the LWAPP APs. The APs then encapsulate all the 802.11 frames from wireless clients inside LWAPP frames and forward the LWAPP frames to the controller. GLOSSARY Access Point ( AP ) An entity that contains an 802.11 medium access control ( MAC ) and physical layer ( PHY ) interface and provides access to the distribution services via the wireless medium for associated clients. LWAPP APs encapsulate all the 802.11 frames in LWAPP frames and sends it to the controller to which it is logically connected. Basic Service Set Identifier (BSSID) The identifier for the service set comprising of all the 802.11 stations under the control of one coordinating Access Point. This identifier happens to be the MAC address of the dot11 radio interface of the Access Point. The wireless clients that associate with the Access Point get the wired uplink through this particular dot11 interface. Central Controller ( CC ) The central entity that terminates the LWAPP protocol tunnel from the LWAPP APs. Throughout this MIB, this entity also referred to as 'controller'. Light Weight Access Point Protocol ( LWAPP ) This is a generic protocol that defines the communication between the Access Points and the Central Controller. Mobility Oracle (MO) When a Central Controller in the Mobility Group is designated as Mobility Oracle, then all the Mobility Controller's (MC) traffic is tunnelled to it by other Mobility Controllers. Currently, MO resides along with MC but MC can reside in a box without MO. Mobility Controller (MC) When a Central Controller in the Mobility Group is designated as Mobility Controller, then all the Mobile Anchor's traffic is tunnelled to it by other Anchors. Each MC has its own/self mobility agent (MA), but MA can reside in a box without MC. Mobility Agent (MA) The Mobility Agent is an entity residing on the access switch that manages mobility events on the switch, and communicates with the Mobility Controller. Access Points can associate directly with MA. Wireless LAN Controller (WLC) Wireless LAN Controller are legacy mobility device which can participate in the new mobility architecture. Mobility Manager The Mobility Manager is the management entity in a mobility controller or mobility agent. Mobile Node ( MN ) A roaming 802.11 wireless device in a wireless network associated with an access point. Anchor MC, Anchor MA Anchor MC or Anchor MA is the mobility entity where a mobile client was first anchored or associated. This is equivalent to home agent (HA). Associated MC, Associated MA Associated MC or Associated MA is the mobility entity where a mobile client roamed and get associated. This is equivalent to foreign agent (FA). It can be local or remote. Mobility Concept by which a Mobile Node can roam from one Access Point to another Access Point, across multiple Central Controllers, without need for repeated authentication. Mobility Group A set of Central Controllers which exchange Mobile Node's authentication information, so that the Mobile Node upon roaming need not re-authenticate. Switch Peer Group (SPG) A set of mobility agents (MAs) form a Switch Peer Group. One or more SPGs are associated with one mobility controller (MC). Traffic between mobility agents within a SPG group goes directly between them - not through their associated MC Mobility Anchor When a Central Controller in the Mobility Group is designated as Mobility Anchor, then all the Mobile Node's traffic is tunnelled to it by other Controllers in the Mobility Group. Guest Tunneling (GT) The concept of designating a Central Controller in the Mobility Group as Mobility Anchor, so that all the Mobile Node's traffic is tunnelled to it by other Controllers in the Mobility Group. Station Management (SMT) This term refers to the internal management of the 802.11 protocol operations by the AP to work cooperatively with the other APs and 802.11 devices in the network. Ethernet over Internet Protocol (EoIP) Ethernet over IP (EoIP) is a protocol that creates an Ethernet tunnel between two routers on top of an IP connection. The EoIP interface appears as an Ethernet interface. Reverse path filtering (RPF) Reverse path filtering (RPF) is a feature provided by most modern Internet Protocol routers, which may be used to reduce the risk of customers attacking other internet hosts. One of the problems network service providers face today is hackers generating packets with fake source IP addresses, a technique known as spoofing. This is often done in order to initiate a denial-of-service attack against another internet host or network. Since the source IP addresses of the incoming packets change, often randomly, and for every packet, the target of such an attack can't easily filter out the attacking packets. However, the source of the attack, i.e. the network service provider of the attacking host, has a simple way to stop such packets from ever leaving its network. A router always knows which networks are reachable via any of its interfaces. By checking the source IP address of all packets coming in via an interface against the networks known to be behind that interface, the router can simply drop packets that aren't supposed to come from there. Hence, reverse path filtering filters packets according to the 'reverse path' to their source IP address. If the path back to the source IP address does not match the path the packet is coming from, it is dropped. REFERENCE [1] Part 11 Wireless LAN Medium Access Control ( MAC ) and Physical Layer ( PHY ) Specifications. [2] Draft-obara-capwap-lwapp-00.txt, IETF Light Weight Access Point Protocol. | ||
| ciscoLwappMobilityExtMIBCompliance | 1.3.6.1.4.1.9.9.846.2.1.1 | The compliance statement for the SNMP entities that implement the ciscoLwappMobilityExtMIB module. | ||
| ciscoLwappMobilityExtMIBComplianceRev1 | 1.3.6.1.4.1.9.9.846.2.1.2 | The compliance statement for the SNMP entities that implement the ciscoLwappMobilityExtMIB module. | ||
| ciscoLwappMobilityExtMIBComplianceRev2 | 1.3.6.1.4.1.9.9.846.2.1.3 | The compliance statement for the SNMP entities that implement the ciscoLwappMobilityExtMIB module. | ||
| ciscoLwappMobilityExtMIBComplianceRev3 | 1.3.6.1.4.1.9.9.846.2.1.4 | The compliance statement for the SNMP entities that implement the ciscoLwappMobilityExtMIB module. | ||
| ciscoLwappMobilityExtMIBComplianceRev4 | 1.3.6.1.4.1.9.9.846.2.1.5 | The compliance statement for the SNMP entities that implement the ciscoLwappMobilityExtMIB module. | ||
| ciscoLwappMobilityExtMIBCompliances | 1.3.6.1.4.1.9.9.846.2.1 | |||
| ciscoLwappMobilityExtMIBConform | 1.3.6.1.4.1.9.9.846.2 | |||
| ciscoLwappMobilityExtMIBGroups | 1.3.6.1.4.1.9.9.846.2.2 | |||
| ciscoLwappMobilityExtMIBNotifs | 1.3.6.1.4.1.9.9.846.0 | |||
| ciscoLwappMobilityExtMIBObjects | 1.3.6.1.4.1.9.9.846.1 | |||
| ciscoLwappMobilityExtNotifObjects | 1.3.6.1.4.1.9.9.846.1.3 | |||
| ciscoLwappMobilityExtNotifsGroup | 1.3.6.1.4.1.9.9.846.2.2.3 | This collection of objects provides the information about the notifications sent by the agent related to mobility. | ||
| ciscoLwappMobilityExtNotifsGroupRev1 | 1.3.6.1.4.1.9.9.846.2.2.9 | This collection of objects provides the information about the notifications sent by the agent related to mobility and guest anchor. | ||
| ciscoLwappMobilityExtNotifyObjectsGroup | 1.3.6.1.4.1.9.9.846.2.2.2 | This collection of objects provide the information about mobility trap configuration and trap definition. These objects are defined under cwciscoLwappMobilityExtNotifObjects. | ||
| ciscoLwappMobilityExtTableObjects | 1.3.6.1.4.1.9.9.846.1.2 | |||
| NTF cLGuestWlanAllAnchorsDown | 1.3.6.1.4.1.9.9.846.0.5 | This notification will be emitted by the SNMP agent when 3 successive CAPWAP/Mobility ping attempts to all the anchors on Guest Wlan, denoted by cLWlanProfileName, fail and all the anchors are conclusively down. | ||
| NTF cLGuestWlanOneAnchorOnGuestLanUp | 1.3.6.1.4.1.9.9.846.0.6 | This notification will be emitted by the SNMP agent when CAPWAP/Mobility and UDP pings successfully to at least one anchor on the Guest Wlan, denoted by cLWlanProfileName, is restored and anchor is conclusively up. | ||
| cLMobilityAnchorPolicyEntryTable | 1.3.6.1.4.1.9.9.846.1.2.15 | not-accessible | This table provides information about one 802.11 LWAPP Mobility Anchor configured with a policy name on this controller | |
| IP cLMobilityAnchorPolicyMCAddress | 1.3.6.1.4.1.9.9.846.1.2.15.1.2 | InetAddress | not-accessible | This object represents the anchor's IP address |
| IPt cLMobilityAnchorPolicyMCAddressType | 1.3.6.1.4.1.9.9.846.1.2.15.1.1 | InetAddressType | not-accessible | This object represents the anchor's IP address type. |
| INT cLMobilityAnchorPolicyMCPriority | 1.3.6.1.4.1.9.9.846.1.2.15.1.4 | INTEGER | read-create | This object specifies priority of the mobility anchor (for the foreign controller) A value of '1' indicates local anchor priority (this is not permitted to be configured) A value of '2' indicates primary anchor priority. A value of '3' indicated secondary anchor priority. A value of '4' indicated tertiary anchor priority. |
| ROW cLMobilityAnchorPolicyRowStatus | 1.3.6.1.4.1.9.9.846.1.2.15.1.3 | RowStatus | read-create | This is the status column for this row and used to create and delete specific instances of rows in this table. |
| cLMobilityAnchorWlanPolicyEntry | 1.3.6.1.4.1.9.9.846.1.2.15.1 | not-accessible | Each entry in this table provides information about one 802.11 LWAPP Mobility Anchor configured with a policy name on this controller. Each row represent an Ip anchor associated with a policy. A row is added when a new anchor is added | |
| IP cLMobilityExtAnchorAssociatedMCAddress | 1.3.6.1.4.1.9.9.846.1.2.4.1.2 | InetAddress | not-accessible | This object represents the anchor's IP address. The type of this address is determined by the value of cLMobilityExtAnchorAssociatedMCAddressType. |
| IPt cLMobilityExtAnchorAssociatedMCAddressType | 1.3.6.1.4.1.9.9.846.1.2.4.1.1 | InetAddressType | not-accessible | This object represents the anchor's IP address type. |
| cLMobilityExtAnchorConfigGroup | 1.3.6.1.4.1.9.9.846.2.2.7 | This object specifies the priority configured for an Anchor WLC mapped on a WLAN. | ||
| cLMobilityExtAnchorEntry | 1.3.6.1.4.1.9.9.846.1.2.4.1 | not-accessible | Each entry in this table represents information about one 802.11 LWAPP Mobility Anchor(MA) configured on a WLAN on this controller. | |
| INT cLMobilityExtAnchorPriority | 1.3.6.1.4.1.9.9.846.1.2.4.1.5 | INTEGER | read-create | This object specifies the priority configured for an anchor WLC mapped on a WLAN. local(1) - Local priority can't be configured. This indicates that anchor WLC is configured with its own IP. primary(2) - This indicates that anchor WLC configured with this priority will have highest priority. secondary(3) - This indicates that anchor WLC configured with this priority will have medium priority. tertiary(4) - This indicates that anchor WLC configured with this priority will have lowest priority. |
| ROW cLMobilityExtAnchorRowStatus | 1.3.6.1.4.1.9.9.846.1.2.4.1.4 | RowStatus | read-create | This is the status column for this row and used to create and delete specific instances of rows in this table. |
| INT cLMobilityExtAnchorStatus | 1.3.6.1.4.1.9.9.846.1.2.4.1.3 | INTEGER | read-only | This object indicates the operational and connectivity status of the Mobility Anchor(MA). notconfigured(0) - This means anchor is not configured for ICMP or EoIP pings. datapathdown(1) - This means anchor is not responding to EoIP pings. controlpathdown(2) - This means successive ICMP pings to the anchor have failed. bothdown(3) - This means anchor is not responding to ICMP or EOIP pings. up(4) - This means anchor is responding to both EOIP and ICMP pings. |
| cLMobilityExtAnchorTable | 1.3.6.1.4.1.9.9.846.1.2.4 | not-accessible | This table contains the information about the 802.11 LWAPP Mobility Anchors on individual WLANs. +...............+ + + + ROUTER + + 10.16.1.1 + +...............+ .. . . . . . . . . . . 10.16.109.112 10.16.105.39 +......+ > +......+ + + [3]CC2 tunnels + + + CC1 + MN1's traffic + CC2 + + + to Anchor CC1 + + +......+ using EoIP +......+ . . . Anchor Foreign . . . +......+ +......+ + + + + + AP1 + + AP2 + + + + + +......+ +......+ WLAN '1' . ^ WLAN '1' . | . [2] associates | . with AP2/CC2 | . | +......+ [1] +......+ + + moves to region + + + MN1 + ---------->>> + MN1 + + + serviced by AP2 + + +......+ +......+ 10.16.109.199 10.16.109.199 In the above diagram, Central Controllers CC1 and CC2 have been configured in a Mobility Group. Currently the Mobile Node 'MN1' obtains its IP from the Central Controller 'CC1' with which it first associates via WLAN '1' through Access Point 'AP1'. 'CC1' obtains DHCP address, say 10.16.109.199 for client 'MN1'. Now the client 'MN1' is identified by 10.16.109.199 for further communication with the network and the communication happens via 'CC1'. Since, 'CC1' and 'CC2' are in same mobility group, 'CC1' sends the authentication block of 'MN1' to 'CC2'. Central Controller 'CC2' has an associated Access Point 'AP2' which beams WLAN '1' and uses 10.16.105.0 / 255.255.255.0 subnet instead. Next, the Mobile Node 'MN1' moves out of range of 'AP1' and gets in to proximity with 'AP2' and continues to use WLAN '1'. 'CC2' locally authenticates 'MN1' against authentication block shared from 'CC1'. 'CC2' forwards all traffic from 'MN1' to router. This is called WLAN mobility. But hold on, 'CC2' uses 10.16.105.0 / 255.255.255.0 subnet for WLAN '1'. So we have two problems here : a> Traffic of 10.16.109.0 / 255.255.255.0 subnet has to be accessible from 10.16.105.0 / 255.255.255.0 subnet. b> Unneccessary overloading of 10.16.105.0 / 255.255.255.0 subnet by traffic from 10.16.109.0 / 255.255.255.0 subnet. How do we address these issues ?? If an EoIP tunnel can be established between 'CC1' and 'CC2' and 'CC1' sends all traffic bound to 'MN1', 10.16.109.199, on this tunnel to 'CC2', which in turn forwards it to 'MN1', then, above two subnet-problems are resolved. This is called Mobility Anchoring. 'CC1' is the Mobility Anchor and 'CC2' is the 'Foreign' for WLAN '1'. As per the configuration, user creates a Mobility Anchor entry in 'CC2' for WLAN '1' with IP address as 'CC1', i.e. 10.16.109.112. So, when 'MN1' connects to WLAN '1' via 'AP2', then 'CC2' establishes EoIP tunnel with 10.16.109.112 and forwards the packets to 'MN1'. Given the above example, the cLMobilityAnchorEntry on 'CC2' looks like : ------------------------------------------------------------------ | MIB - ATTRIBUTES | ROW#1 | ROW#2 | ------------------------------------------------------------------ | cLWlanIndex | 1 | | ------------------------------------------------------------------ | cLMobilityExtAnchorAssociatedMCAddressType | ipv4 | | ------------------------------------------------------------------ | cLMobilityExtAnchorAssociatedMCAddress | 10.16.109.112 | | ------------------------------------------------------------------ | cLMobilityExtAnchorStatus | up(4) | | ------------------------------------------------------------------ | cLMobilityExtAnchorRowStatus | active(1) | | ------------------------------------------------------------------ This feature has advantages for both security and load balancing. It can be used to restrict a WLAN to a single subnet, regardless of the MN's entry point into the network. A 'public' or guest WLAN can thus be accessed throughout an enterprise, but still is restricted to a specific subnet. It can also be used to provide some geographic load balancing, since the WLANs can represent a particular section of a building (ie., engineering, marketing). Those groups can be 'anchored' on a particular subnet/switch rather than on the CC of first occurrence (ie., the switch controlling the APs by the front door). | |
| IP cLMobilityExtApMgrAddress | 1.3.6.1.4.1.9.9.846.1.2.8.1.3 | InetAddress | read-only | This object indicates the AP manager's IP address. The type of this address is determined by the value of cLMobilityExtApMgrAddressType. |
| IPt cLMobilityExtApMgrAddressType | 1.3.6.1.4.1.9.9.846.1.2.8.1.2 | InetAddressType | read-only | This object indicates the AP manager's IP address type. |
| cLMobilityExtApMgrEntry | 1.3.6.1.4.1.9.9.846.1.2.8.1 | not-accessible | Each entry in this table represents information about one 802.11 LWAPP mobility AP Manager configured on this controller. | |
| INT cLMobilityExtApMgrInterfaceType | 1.3.6.1.4.1.9.9.846.1.2.8.1.8 | INTEGER | read-only | This object indicates the AP manager interface type. It can be of two types: management(1) - For in-band management of the controller. ap(2) - For L3 communications between the controller and LWAPP APs. |
| MAC cLMobilityExtApMgrMacAddress | 1.3.6.1.4.1.9.9.846.1.2.8.1.6 | MacAddress | read-only | This object indicates the mac address for this AP manager. |
| STR cLMobilityExtApMgrName | 1.3.6.1.4.1.9.9.846.1.2.8.1.1 | SnmpAdminString | not-accessible | This object represents the name for this AP manager. |
| IP cLMobilityExtApMgrNetmask | 1.3.6.1.4.1.9.9.846.1.2.8.1.5 | InetAddress | read-only | This object indicates the AP manager's netmask. The type of this address is determined by the value of cLMobilityExtApMgrNetmaskType. |
| IPt cLMobilityExtApMgrNetmaskType | 1.3.6.1.4.1.9.9.846.1.2.8.1.4 | InetAddressType | read-only | This object indicates the AP manager's netmask type. |
| ROW cLMobilityExtApMgrRowStatus | 1.3.6.1.4.1.9.9.846.1.2.8.1.9 | RowStatus | read-create | This is the status column for this row and used to create and delete specific instances of rows in this table. |
| cLMobilityExtApMgrTable | 1.3.6.1.4.1.9.9.846.1.2.8 | not-accessible | This table contains the information about the 802.11 LWAPP mobility AP Manager. | |
| U32 cLMobilityExtApMgrVlanId | 1.3.6.1.4.1.9.9.846.1.2.8.1.7 | Unsigned32 | read-only | This object indicates the VLAN Id for this AP manager. |
| cLMobilityExtConfigGroup | 1.3.6.1.4.1.9.9.846.2.2.1 | This is a collection of objects which can be configured to control Mobility parameters. cLMobilityExtConfigGroup object is superseded by cLMobilityExtConfigGroupRev1. | ||
| cLMobilityExtConfigGroupRev1 | 1.3.6.1.4.1.9.9.846.2.2.4 | This is a collection of objects which can be configured to control mobility parameters. | ||
| T/F cLMobilityExtEncryptionStatus | 1.3.6.1.4.1.9.9.846.1.1.2.12 | TruthValue | read-only | This object represents the current status of the encryption in the mobility tunnel. A value of 'true' indicates encryption is enabled. A value of 'false' indicates encryption is disabled. |
| IP cLMobilityExtForeignWlcAddress | 1.3.6.1.4.1.9.9.846.1.2.9.1.2 | InetAddress | not-accessible | This object represents the IP address of the foreign controller,to which the interface mapping is to be configured. The type of this address is determined by the value of cLMobilityExtForeignWlcAddressType. |
| IPt cLMobilityExtForeignWlcAddressType | 1.3.6.1.4.1.9.9.846.1.2.9.1.1 | InetAddressType | not-accessible | This object represents the IP address type of the foreign controller,to which the interface mapping is to be configured. |
| cLMobilityExtForeignWlcMapEntry | 1.3.6.1.4.1.9.9.846.1.2.9.1 | not-accessible | Each entry represents a row in the cLMobilityExtForeignWlcIfMappingTable. The entries are added and deleted by explicit user driven action. | |
| STR cLMobilityExtForeignWlcMapIf | 1.3.6.1.4.1.9.9.846.1.2.9.1.3 | SnmpAdminString | read-create | This object specifies name of the interface/interface group which would be used for the communication with the clients connected to the foreign controller . |
| ROW cLMobilityExtForeignWlcMapRowStatus | 1.3.6.1.4.1.9.9.846.1.2.9.1.4 | RowStatus | read-create | This is the status column for this row and used to create and delete specific instances of rows in this table. |
| cLMobilityExtForeignWlcMapTable | 1.3.6.1.4.1.9.9.846.1.2.9 | not-accessible | This table contains mappings of the foreign controller with the interface/interface group to be used, when clients directly connected to the foreign controller send the DHCP request to the anchor controller. | |
| cLMobilityExtGroupEntry | 1.3.6.1.4.1.9.9.846.1.2.10.1 | not-accessible | Each entry in this table represents information about one mobility group. | |
| cLMobilityExtGroupMemberEntry | 1.3.6.1.4.1.9.9.846.1.2.3.1 | not-accessible | Each entry in this table represents information about one 802.11 LWAPP mobility member configured on this controller. | |
| STR cLMobilityExtGroupMemberGroupName | 1.3.6.1.4.1.9.9.846.1.2.3.1.3 | SnmpAdminString | read-create | This object specifies the member's mobility group name. |
| OCT cLMobilityExtGroupMemberHashKey | 1.3.6.1.4.1.9.9.846.1.2.3.1.10 | OCTET STRING | read-create | This object specifies the hash key of the peer mobility member. It is a 40 digit hex value or 'none'. Value 'none' is used to clear the previously configured hash key. |
| MAC cLMobilityExtGroupMemberMacAddress | 1.3.6.1.4.1.9.9.846.1.2.3.1.7 | MacAddress | read-create | This object specifies the member's MAC address. |
| IP cLMobilityExtGroupMemberMulticastAddress | 1.3.6.1.4.1.9.9.846.1.2.3.1.9 | InetAddress | read-only | This object indicates the member's multicast IP address. The type of this address is determined by the value of cLMobilityExtGroupMemberMulticastAddressType. |
| IPt cLMobilityExtGroupMemberMulticastAddressType | 1.3.6.1.4.1.9.9.846.1.2.3.1.8 | InetAddressType | read-only | This used indicates the member's multicast IP address type. |
| IP cLMobilityExtGroupMemberPrivateAddress | 1.3.6.1.4.1.9.9.846.1.2.3.1.2 | InetAddress | not-accessible | This object represents the member's private IP address. The type of this address is determined by the value of cLMobilityExtGroupMemberPrivateAddressType. |
| IPt cLMobilityExtGroupMemberPrivateAddressType | 1.3.6.1.4.1.9.9.846.1.2.3.1.1 | InetAddressType | not-accessible | This object represents the member's private IP address type. |
| IP cLMobilityExtGroupMemberPublicAddress | 1.3.6.1.4.1.9.9.846.1.2.3.1.5 | InetAddress | read-create | This object specifies the member's public IP address. The type of this address is determined by the value of cLMobilityExtGroupMemberPublicAddressType. |
| IPt cLMobilityExtGroupMemberPublicAddressType | 1.3.6.1.4.1.9.9.846.1.2.3.1.4 | InetAddressType | read-create | This object specifies the member's public IP address type. |
| ROW cLMobilityExtGroupMemberRowStatus | 1.3.6.1.4.1.9.9.846.1.2.3.1.11 | RowStatus | read-create | This is the status column for this row and used to create and delete specific instances of rows in this table. |
| INT cLMobilityExtGroupMemberStatus | 1.3.6.1.4.1.9.9.846.1.2.3.1.6 | INTEGER | read-only | This object indicates the operational and connectivity status of the member. notconfigured(0) - This means group member is not configured for ICMP or EoIP pings. datapathdown(1) - This means group member is not responding to EoIP pings. controlpathdown(2) - This means successive ICMP pings to the group member have failed. bothdown(3) - This means group member is not responding to ICMP or EOIP pings. up(4) - This means group member is responding to both EOIP and ICMP pings. |
| cLMobilityExtGroupMemberTable | 1.3.6.1.4.1.9.9.846.1.2.3 | not-accessible | This table contains the information about the 802.11 LWAPP mobility group members. | |
| IP cLMobilityExtGroupMulticastAddress | 1.3.6.1.4.1.9.9.846.1.2.10.1.3 | InetAddress | read-create | This object specifies the multicast IP address for the mobility group. The type of this address is determined by the value of cLMobilityExtGroupMulticastAddressType. |
| IPt cLMobilityExtGroupMulticastAddressType | 1.3.6.1.4.1.9.9.846.1.2.10.1.2 | InetAddressType | read-create | This object specifies the multicast IP address type for the mobility group. |
| IP cLMobilityExtGroupMulticastAddressv6 | 1.3.6.1.4.1.9.9.846.1.2.10.1.8 | InetAddress | read-create | This object represents the multicast IPv6 address for the mobility group. |
| IPt cLMobilityExtGroupMulticastAddressv6Type | 1.3.6.1.4.1.9.9.846.1.2.10.1.7 | InetAddressType | read-create | This object represents the multicast IPv6 address type for the mobility group. |
| T/F cLMobilityExtGroupMulticastMode | 1.3.6.1.4.1.9.9.846.1.2.10.1.5 | TruthValue | read-create | This object represents the IPv4 multicast mode for the mobility group. |
| T/F cLMobilityExtGroupMulticastModev6 | 1.3.6.1.4.1.9.9.846.1.2.10.1.6 | TruthValue | read-create | This object represents the IPv6 multicast mode for the mobility group. |
| STR cLMobilityExtGroupName | 1.3.6.1.4.1.9.9.846.1.2.10.1.1 | SnmpAdminString | not-accessible | This object represents the name for the mobility group. |
| ROW cLMobilityExtGroupRowStatus | 1.3.6.1.4.1.9.9.846.1.2.10.1.4 | RowStatus | read-create | This is the status column for this row and used to create and delete specific instances of rows in this table. |
| cLMobilityExtGroupTable | 1.3.6.1.4.1.9.9.846.1.2.10 | not-accessible | This table contains the information about the mobility groups where clients from this MC can roam. | |
| C32 cLMobilityExtMAAnchoredClients | 1.3.6.1.4.1.9.9.846.1.1.5.9 | Counter32 | read-only | This object indicates the anchored clients connected to Mobility Agent. |
| DSC cLMobilityExtMADscpValue | 1.3.6.1.4.1.9.9.846.1.1.3.12 | Dscp | read-only | This object indicates the Differentiated Services Code Point (DSCP) value. Here it is used for classifying and managing mobility control packets and providing quality of service (QoS) on IP networks. |
| C32 cLMobilityExtMAForeignedClients | 1.3.6.1.4.1.9.9.846.1.1.5.10 | Counter32 | read-only | This object indicates the foreign clients connected to Mobility Agent. |
| U32 cLMobilityExtMAKeepAliveCount | 1.3.6.1.4.1.9.9.846.1.1.3.10 | Unsigned32 | read-only | This object indicates the keep alive count. If keep alive response is not received consecutively for N (keep alive count) times, the mobility link is declared as down. |
| U32 cLMobilityExtMAKeepAliveInterval | 1.3.6.1.4.1.9.9.846.1.1.3.11 | Unsigned32 | read-only | This object indicates the keep alive interval. Each MA sends periodically keep alive packet to other mobility devices (MA or MC). |
| C32 cLMobilityExtMALocalClients | 1.3.6.1.4.1.9.9.846.1.1.5.8 | Counter32 | read-only | This object indicates local clients connected to Mobility Agent. |
| IP cLMobilityExtMAMCPrivateAddress | 1.3.6.1.4.1.9.9.846.1.1.3.4 | InetAddress | read-write | This object specifies the MC's private IP address for this MA. The type of this address is determined by the value of cLMobilityExtMAMCPrivateAddressType. |
| IPt cLMobilityExtMAMCPrivateAddressType | 1.3.6.1.4.1.9.9.846.1.1.3.3 | InetAddressType | read-write | This object specifies the MC's private IP address type for this MA. |
| IP cLMobilityExtMAMCPublicAddress | 1.3.6.1.4.1.9.9.846.1.1.3.2 | InetAddress | read-write | This object specifies the MC's public IP address for this MA. The type of this address is determined by the value of cLMobilityExtMAMCPublicAddressType. |
| IPt cLMobilityExtMAMCPublicAddressType | 1.3.6.1.4.1.9.9.846.1.1.3.1 | InetAddressType | read-write | This object specifies the MC's public IP address type for this MA. |
| IP cLMobilityExtMAOwnMulticastAddress | 1.3.6.1.4.1.9.9.846.1.1.3.9 | InetAddress | read-only | This object indicates the multicast address for the own SPG group. The type of this address is determined by the value of cLMobilityExtMAOwnMulticastAddressType. |
| IPt cLMobilityExtMAOwnMulticastAddressType | 1.3.6.1.4.1.9.9.846.1.1.3.8 | InetAddressType | read-only | This object indicates the multicast address type for the own SPG group. SPG represents the switch peer group which indicates the proximity group inside which the WiFi client has most likelihood of roaming. Each device belongs to a SPG which is identified by a SPG name and optionally it could have a multicast ip address as well. |
| cLMobilityExtMAPeerEntry | 1.3.6.1.4.1.9.9.846.1.2.11.1 | not-accessible | Each entry in this table represents information about one 802.11 LWAPP mobility SPG peer member of this MA. | |
| INT cLMobilityExtMAPeerLinkStatus | 1.3.6.1.4.1.9.9.846.1.2.11.1.5 | INTEGER | read-only | This object indicates the control path and data path status of the link between this MA and its peer MA in the same SPG. notconfigured(0) - This means group member is not configured for ICMP or EoIP pings. datapathdown(1) - This means group member is not responding to EoIP pings. controlpathdown(2) - This means successive ICMP pings to the group member have failed. bothdown(3) - This means group member is not responding to ICMP or EOIP pings. up(4) - This means group member is responding to both EOIP and ICMP pings. |
| IP cLMobilityExtMAPeerPrivateAddress | 1.3.6.1.4.1.9.9.846.1.2.11.1.2 | InetAddress | not-accessible | This object represents this MA peer's private IP address. The type of this address is determined by the value of cLMobilityExtMAPeerPrivateAddressType. |
| IPt cLMobilityExtMAPeerPrivateAddressType | 1.3.6.1.4.1.9.9.846.1.2.11.1.1 | InetAddressType | not-accessible | This object represents this MA peer's private IP address type. |
| IP cLMobilityExtMAPeerPublicAddress | 1.3.6.1.4.1.9.9.846.1.2.11.1.4 | InetAddress | read-only | This object indicates this MA peer's public address. The type of this address is determined by the value of cLMobilityExtMAPeerPublicAddressType. |
| IPt cLMobilityExtMAPeerPublicAddressType | 1.3.6.1.4.1.9.9.846.1.2.11.1.3 | InetAddressType | read-only | This object indicates this MA peer's public IP address type. |
| cLMobilityExtMAPeerTable | 1.3.6.1.4.1.9.9.846.1.2.11 | not-accessible | This table contains the information about the 802.11 LWAPP SPG peer members of this MA. | |
| C32 cLMobilityExtMAProtocolReceiveErrors | 1.3.6.1.4.1.9.9.846.1.1.5.3 | Counter32 | read-only | This object indicates the total number of mobility control error messages received by the Mobility Agent. |
| C32 cLMobilityExtMAProtocolRetransmitted | 1.3.6.1.4.1.9.9.846.1.1.5.6 | Counter32 | read-only | This object indicates the total number of control messages retransmitted by Mobility Agent. |
| C32 cLMobilityExtMAProtocolTransmitErrors | 1.3.6.1.4.1.9.9.846.1.1.5.4 | Counter32 | read-only | This object indicates the total number of mobility control error messages on transmit side of Mobility Agent. |
| C32 cLMobilityExtMAReceivedDrops | 1.3.6.1.4.1.9.9.846.1.1.5.2 | Counter32 | read-only | This object indicates the total number of mobility control messages dropped by Mobility Agent. |
| C32 cLMobilityExtMAReceivedTotal | 1.3.6.1.4.1.9.9.846.1.1.5.1 | Counter32 | read-only | This object indicates the total number of mobility control messages received by the Mobility Agent. |
| STR cLMobilityExtMASpgName | 1.3.6.1.4.1.9.9.846.1.1.3.7 | SnmpAdminString | read-only | This object indicates the Switch Peer Group (SPG) name where this MA belongs. |
| U32 cLMobilityExtMASpgPeerCount | 1.3.6.1.4.1.9.9.846.1.1.3.6 | Unsigned32 | read-only | This object indicates the number of peer members of this mobility agent (MA). |
| C32 cLMobilityExtMAStateErrors | 1.3.6.1.4.1.9.9.846.1.1.5.5 | Counter32 | read-only | This object indicates the state transition errors on Mobility Agent. |
| cLMobilityExtMAStatsConfigGroup | 1.3.6.1.4.1.9.9.846.2.2.5 | This is collection of MA stat objects which can be configure to control mobility parameters. | ||
| INT cLMobilityExtMAToMCLinkStatus | 1.3.6.1.4.1.9.9.846.1.1.3.5 | INTEGER | read-only | This object indicates the control path and data path status of the link between this Mobility Agent(MA) and its mobility controller. notconfigured(0) - This indicates that link between MA and MC is not configured for ICMP or EoIP pings. datapathdown(1) - This indicates that link between MA and MC is not responding to EoIP pings. controlpathdown(2) - This indicates that link between MA and MC successive ICMP pings to the group have failed. bothdown(3) - This indicates that link between MA and MC is not responding to ICMP or EOIP pings. up(4) - This indicates that link between MA and MC is responding to both EOIP and ICMP pings. |
| C32 cLMobilityExtMATotalClients | 1.3.6.1.4.1.9.9.846.1.1.5.7 | Counter32 | read-only | This object indicates the total clients connected to Mobility Agent. |
| C32 cLMobilityExtMATotalHandoffEndRequestReceived | 1.3.6.1.4.1.9.9.846.1.1.5.13 | Counter32 | read-only | This object indicates the total handoff end requests received by Mobility Agent. |
| C32 cLMobilityExtMATotalInterGroupHandoffReceived | 1.3.6.1.4.1.9.9.846.1.1.5.11 | Counter32 | read-only | This object indicates the total inter group handoff received by Mobility Agent. |
| C32 cLMobilityExtMATotalInterGroupHandoffSent | 1.3.6.1.4.1.9.9.846.1.1.5.14 | Counter32 | read-only | This object indicates the total inter group handoffs sent by Mobility Agent. |
| C32 cLMobilityExtMATotalIntraGroupHandoffReceived | 1.3.6.1.4.1.9.9.846.1.1.5.12 | Counter32 | read-only | This object indicates the total intra group handoffs received by Mobility Agent. |
| C32 cLMobilityExtMATotalIntraGroupHandoffSent | 1.3.6.1.4.1.9.9.846.1.1.5.15 | Counter32 | read-only | This object indicates the total intra group handoffs sent by Mobility Agent. |
| T/F cLMobilityExtMCAdminEnableStatus | 1.3.6.1.4.1.9.9.846.1.1.1.4 | TruthValue | read-write | This object specifies the user to enable or disable MC mode. The controller can operate either in MC/MA or MA only mode. A value of 'true' indicates both Mobility Controller (MC) is enabled. A value of 'false' indicates Mobility Controller (MC) is disabled. Please note that cLMobilityExtMCEnableStatus (operational value)can be false even if cLMobilityExtMCAdminEnableStatus is true. |
| U32 cLMobilityExtMCAPCount | 1.3.6.1.4.1.9.9.846.1.2.14.1.3 | Unsigned32 | read-only | This object indicates the total number of APs reported by this device: this MC, or its peer MC or its MA. |
| cLMobilityExtMCAPCountEntry | 1.3.6.1.4.1.9.9.846.1.2.14.1 | not-accessible | Each entry in this table represents information on total number of APs that is reported by this MC or its peer MC or its MA. | |
| U32 cLMobilityExtMCApCountLicensesInUse | 1.3.6.1.4.1.9.9.846.1.1.1.11 | Unsigned32 | read-only | This object represents the total APs directly associated with this MC and its MAs. Each Access point that joins the Controller acquires a licence from the controller. |
| IP cLMobilityExtMCAPCountReportingDeviceAddress | 1.3.6.1.4.1.9.9.846.1.2.14.1.2 | InetAddress | not-accessible | This object represents the reporting device's IP address. The type of this address is determined by the value of cLMobilityExtMCAPCountReportingDeviceAddressType. |
| IPt cLMobilityExtMCAPCountReportingDeviceAddressType | 1.3.6.1.4.1.9.9.846.1.2.14.1.1 | InetAddressType | not-accessible | This object represents the reporting device's IP address type. |
| cLMobilityExtMCAPCountTable | 1.3.6.1.4.1.9.9.846.1.2.14 | not-accessible | This table contains the information about the total number of APs that are reported by this MC, its peer MCs and its MAs. | |
| cLMobilityExtMCAPEntry | 1.3.6.1.4.1.9.9.846.1.2.13.1 | not-accessible | Each entry in this table represents information about AP that is reported by this MC or its peer MC or its MA. | |
| MAC cLMobilityExtMCAPMacAddress | 1.3.6.1.4.1.9.9.846.1.2.13.1.1 | MacAddress | not-accessible | This object represents the reported AP's mac address. |
| STR cLMobilityExtMCAPName | 1.3.6.1.4.1.9.9.846.1.2.13.1.2 | SnmpAdminString | read-only | This object indicates the reported AP's name. |
| IP cLMobilityExtMCAPReportingDeviceAddress | 1.3.6.1.4.1.9.9.846.1.2.13.1.4 | InetAddress | read-only | This object indicates the reporting device's IP address. The type of this address is determined by the value of cLMobilityExtMCAPReportingDeviceAddressType. |
| IPt cLMobilityExtMCAPReportingDeviceAddressType | 1.3.6.1.4.1.9.9.846.1.2.13.1.3 | InetAddressType | read-only | This object insdicates the reporting device's IP address type. |
| INT cLMobilityExtMCAPReportingDeviceType | 1.3.6.1.4.1.9.9.846.1.2.13.1.5 | INTEGER | read-only | This object indicates the reporting device's type: this MC, or its peer MC or its MA. peerMC(0) - The reporting device is peer Mobility Controller. associatedMA(1) - The reporting device is Mobility Agent. localMC(2) - The reporting device is local Mobility Controller. |
| cLMobilityExtMCAPTable | 1.3.6.1.4.1.9.9.846.1.2.13 | not-accessible | This table contains the information about the APs that are reported by this MC, its peer MCs and its MAs. | |
| IP cLMobilityExtMCClientAddress | 1.3.6.1.4.1.9.9.846.1.2.6.1.7 | InetAddress | read-only | This object indicates the client IP address. The type of this address is determined by the value of cLMobilityExtMCClientAddressType. |
| IPt cLMobilityExtMCClientAddressType | 1.3.6.1.4.1.9.9.846.1.2.6.1.6 | InetAddressType | read-only | This object indicates the client IP address type. |
| IP cLMobilityExtMCClientAnchorMAAddress | 1.3.6.1.4.1.9.9.846.1.2.6.1.16 | InetAddress | read-only | This object indicates the MA anchor's IP address. The type of this address is determined by the value of cLMobilityExtMCClientAnchorMAAddressType. |
| IPt cLMobilityExtMCClientAnchorMAAddressType | 1.3.6.1.4.1.9.9.846.1.2.6.1.15 | InetAddressType | read-only | This object indicates the MA anchor's IP address type. |
| U32 cLMobilityExtMCClientAnchorMCGroupId | 1.3.6.1.4.1.9.9.846.1.2.6.1.11 | Unsigned32 | read-only | This object indicates the client's anchor MC mobility group ID. |
| IP cLMobilityExtMCClientAnchorMCPrivateAddress | 1.3.6.1.4.1.9.9.846.1.2.6.1.3 | InetAddress | read-only | This object indicates the client's anchor MC private IP address. The type of this address is determined by the value of cLMobilityExtMCClientAnchorMCPrivateAddressType. |
| IPt cLMobilityExtMCClientAnchorMCPrivateAddressType | 1.3.6.1.4.1.9.9.846.1.2.6.1.2 | InetAddressType | read-only | This object indicates the client's anchor MC private IP address type. |
| IP cLMobilityExtMCClientAssociatedMAAddress | 1.3.6.1.4.1.9.9.846.1.2.6.1.14 | InetAddress | read-only | This object indicates the MA local or foreign IP address. The type of this address is determined by the value of cLMobilityExtMCClientAssociatedMAAddressType. |
| IPt cLMobilityExtMCClientAssociatedMAAddressType | 1.3.6.1.4.1.9.9.846.1.2.6.1.13 | InetAddressType | read-only | This object indicates the MA local or foreign IP address type. |
| IP cLMobilityExtMCClientAssociatedMCAddress | 1.3.6.1.4.1.9.9.846.1.2.6.1.5 | InetAddress | read-only | This object indicates the client's associated MC (local or foreign) IP address. The type of this address is determined by the value of cLMobilityExtMCClientAssociatedMCAddressType. |
| IPt cLMobilityExtMCClientAssociatedMCAddressType | 1.3.6.1.4.1.9.9.846.1.2.6.1.4 | InetAddressType | read-only | This object indicates the client's associated MC (local or foreign) IP address type. |
| U32 cLMobilityExtMCClientAssociatedMCGroupId | 1.3.6.1.4.1.9.9.846.1.2.6.1.12 | Unsigned32 | read-only | This object indicates the client's associated MC (local or foreign) mobility group ID. |
| DAT cLMobilityExtMCClientAssociationTime | 1.3.6.1.4.1.9.9.846.1.2.6.1.9 | DateAndTime | read-only | This object indicates the client's association time. The object cLMobilityExtMCClientUpTime represents the MC client up time since its association. cLMobilityExtMCClientAssociationTime object is superseded by cLMobilityExtMCClientUpTime. |
| cLMobilityExtMCClientEntry | 1.3.6.1.4.1.9.9.846.1.2.6.1 | not-accessible | Each entry in this table represents information about one 802.11 LWAPP Mobility Clients on this MC. | |
| T/F cLMobilityExtMCClientLocalClient | 1.3.6.1.4.1.9.9.846.1.2.6.1.10 | TruthValue | read-only | This object indicates whether the client is local. A value of 'true' indicates the client is local. A value of 'false' indicates the client is not local to this MC. |
| MAC cLMobilityExtMCClientMacAddress | 1.3.6.1.4.1.9.9.846.1.2.6.1.1 | MacAddress | not-accessible | This object represents the client's MAC address. |
| INT cLMobilityExtMCClientState | 1.3.6.1.4.1.9.9.846.1.2.6.1.8 | INTEGER | read-only | This object indicates the client state. init(0) - Client is not associated. local(1) - Client is local to Mobility Controller. foreign(2) - Client is foreign to Mobility Controller. anchor(3) - Client is anchor to Mobility Controller. |
| cLMobilityExtMCClientTable | 1.3.6.1.4.1.9.9.846.1.2.6 | not-accessible | This table contains the information about the 802.11 LWAPP Mobility Clients on this MC. | |
| NUM cLMobilityExtMCClientUpTime | 1.3.6.1.4.1.9.9.846.1.2.6.1.17 | CiscoAbsZeroBasedCounter64 | read-only | The object indicates the MC client up time since its association. |
| DSC cLMobilityExtMCDscpValue | 1.3.6.1.4.1.9.9.846.1.1.1.8 | Dscp | read-write | This object specifies the Differentiated Services Code Point (DSCP) value. Here it is used for classifying and managing mobility control packets and providing quality of service (QoS) on IP networks. Valid value ranges from 0 to 63. |
| T/F cLMobilityExtMCEnableStatus | 1.3.6.1.4.1.9.9.846.1.1.1.3 | TruthValue | read-only | This object represents the current status of Mobility Controller (MC). The controller can operate either in MC/MA or MA only mode. A value of 'true' indicates Mobility Controller (MC) is enabled. A value of 'false' indicates Mobility Controller (MC) is disabled. |
| C32 cLMobilityExtMCHandoffClientDeleteReceived | 1.3.6.1.4.1.9.9.846.1.1.4.9 | Counter32 | read-only | This object indicates the total number of client deletes received by Mobility Controller. |
| C32 cLMobilityExtMCHandoffClientDeleteTransmitted | 1.3.6.1.4.1.9.9.846.1.1.4.12 | Counter32 | read-only | This object indicates the nubmer of client deletes transmitted by Mobility Controller. |
| C32 cLMobilityExtMCHandoffCompleteReceived | 1.3.6.1.4.1.9.9.846.1.1.4.8 | Counter32 | read-only | This object indicates the handoff completion received by Mobility Controller. |
| C32 cLMobilityExtMCHandoffCompleteTransmitted | 1.3.6.1.4.1.9.9.846.1.1.4.11 | Counter32 | read-only | This object indicates the handoff completion transmitted by Mobility Controller. |
| C32 cLMobilityExtMCHandoffRequestsReceived | 1.3.6.1.4.1.9.9.846.1.1.4.7 | Counter32 | read-only | This object indicates the handoff requests received by Mobility Controller. |
| C32 cLMobilityExtMCHandoffRequestsTransmitted | 1.3.6.1.4.1.9.9.846.1.1.4.10 | Counter32 | read-only | This object indicates the handoff requests transmitted by Mobility Controller. |
| U32 cLMobilityExtMCKeepAliveCount | 1.3.6.1.4.1.9.9.846.1.1.1.6 | Unsigned32 | read-write | This object specifies the keep alive count. If keep alive response is not received consecutively for N (keep alive count) times, the mobility link is declared as down. |
| U32 cLMobilityExtMCKeepAliveInterval | 1.3.6.1.4.1.9.9.846.1.1.1.7 | Unsigned32 | read-write | This object specifies the keep alive interval. This object is valid for MC, not MA. |
| U32 cLMobilityExtMCMAClientCount | 1.3.6.1.4.1.9.9.846.1.2.12.1.3 | Unsigned32 | read-only | This object indicates the MA's client count. |
| IP cLMobilityExtMCMAPrivateAddress | 1.3.6.1.4.1.9.9.846.1.2.12.1.2 | InetAddress | not-accessible | This object represents the MA's private IP address. The type of this address is determined by the value of cLMobilityExtMCMAPrivateAddressType. |
| IPt cLMobilityExtMCMAPrivateAddressType | 1.3.6.1.4.1.9.9.846.1.2.12.1.1 | InetAddressType | not-accessible | This object represents the MA's private IP address type. |
| cLMobilityExtMCMAStatisticsEntry | 1.3.6.1.4.1.9.9.846.1.2.12.1 | not-accessible | Each entry in this table represents information about statistics of one MA that is associated with this MC. | |
| cLMobilityExtMCMAStatisticsTable | 1.3.6.1.4.1.9.9.846.1.2.12 | not-accessible | This table contains the information about the MA statistics as reported by this MC. | |
| T/F cLMobilityExtMCMOAdminEnableStatus | 1.3.6.1.4.1.9.9.846.1.1.1.2 | TruthValue | read-write | This object specifies the user to enable or disable MO mode. A value of 'true' indicates both Mobility Oracle (MO) is enabled. A value of 'false' indicates Mobility Oracle (MO) is disabled. Please note that cLMobilityExtMOEnableStatus (operational value)can be false even if cLMobilityExtMOAdminEnableStatus is true. |
| STR cLMobilityExtMCMobilityGroupName | 1.3.6.1.4.1.9.9.846.1.1.1.14 | SnmpAdminString | read-write | This object specifies the name for this mobility group. |
| T/F cLMobilityExtMCMOEnableStatus | 1.3.6.1.4.1.9.9.846.1.1.1.1 | TruthValue | read-only | This object represents the current status of the Mobility Oracle (MO). A value of 'true' indicates Mobility Oracle is enabled. A value of 'false' indicates Mobility Oracle (MO) is disabled. |
| U32 cLMobilityExtMCMONumberOfClients | 1.3.6.1.4.1.9.9.846.1.1.1.15 | Unsigned32 | read-only | This object indicates the total number of clients reported by MO. |
| IP cLMobilityExtMCMOPublicAddress | 1.3.6.1.4.1.9.9.846.1.1.1.10 | InetAddress | read-write | This object specifies the MO's public IP address.The type of this address is determined by the value of cLMobilityExtMCMOPublicAddressType object. |
| IPt cLMobilityExtMCMOPublicAddressType | 1.3.6.1.4.1.9.9.846.1.1.1.9 | InetAddressType | read-write | This object specifies the MO's public IP address type. |
| T/F cLMobilityExtMCMulticastMode | 1.3.6.1.4.1.9.9.846.1.1.1.5 | TruthValue | read-write | This object specifies the user to enable or disable multicast mode. A value of 'true' indicates multicast mode is enabled. A value of 'false' indicates multicast mode is disabled. |
| T/F cLMobilityExtMCMulticastModev6 | 1.3.6.1.4.1.9.9.846.1.1.1.21 | TruthValue | read-write | This object allows the user to enable or disable IPv6 multicast mode. A value of 'true' indicates IPv6 multicast mode is enabled. A value of 'false' indicates IPv6 multicast mode is disabled. |
| U32 cLMobilityExtMCNumberOfMCs | 1.3.6.1.4.1.9.9.846.1.1.1.16 | Unsigned32 | read-only | This object indicates the total number of MCs within a mobility domain. |
| U32 cLMobilityExtMCNumberOfReportedAPsInSubDomain | 1.3.6.1.4.1.9.9.846.1.1.1.18 | Unsigned32 | read-only | This object indicates the total number of APs reported by this MC and its MAs. |
| IP cLMobilityExtMCOwnGroupMulticastAddress | 1.3.6.1.4.1.9.9.846.1.1.1.13 | InetAddress | read-write | This object specifies the multicast IP address of its own mobility group. The type of this address is determined by the value of cLMobilityExtMCOwnGroupMulticastAddressType object. |
| IPt cLMobilityExtMCOwnGroupMulticastAddressType | 1.3.6.1.4.1.9.9.846.1.1.1.12 | InetAddressType | read-write | This object specifies the multicast IP address type of its own mobility group. |
| IP cLMobilityExtMCOwnGroupMulticastAddressv6 | 1.3.6.1.4.1.9.9.846.1.1.1.20 | InetAddress | read-write | This object represents the multicast IPv6 address of its own mobility group. |
| IPt cLMobilityExtMCOwnGroupMulticastAddressv6Type | 1.3.6.1.4.1.9.9.846.1.1.1.19 | InetAddressType | read-write | This object represents the multicast IP address type of its own mobility group. |
| C32 cLMobilityExtMCProtocolReceiveErrors | 1.3.6.1.4.1.9.9.846.1.1.4.3 | Counter32 | read-only | This object indicates the total number of mobility control error messages received by the Mobility Controller.The counter represents the received packet errors as seen by the controller deviating from the proprietary mobility protocol which is instrumental in achieving the seamless WiFi client roaming. |
| C32 cLMobilityExtMCProtocolRetransmitted | 1.3.6.1.4.1.9.9.846.1.1.4.6 | Counter32 | read-only | This object indicates the total number of control messages retransmitted by Mobility Controller. |
| C32 cLMobilityExtMCProtocolTransmitErrors | 1.3.6.1.4.1.9.9.846.1.1.4.4 | Counter32 | read-only | This object indicates the total number of mobility control error messages on transmit side of Mobility Controller.The counter represents the transmit packet errors as seen by the controller deviating from the proprietary mobility protocol,which is instrumental in achieving the seamless WiFi client roaming. |
| C32 cLMobilityExtMCReceivedDrops | 1.3.6.1.4.1.9.9.846.1.1.4.2 | Counter32 | read-only | This object indicates the total number of mobility control messages dropped by Mobility Controller. |
| C32 cLMobilityExtMCReceivedTotalEx | 1.3.6.1.4.1.9.9.846.1.1.4.1 | Counter32 | read-only | This object indicates the total number of mobility control messages received by the Mobility Controller. |
| C32 cLMobilityExtMCStateErrors | 1.3.6.1.4.1.9.9.846.1.1.4.5 | Counter32 | read-only | This object indicates the state transition errors on Mobility Controller. |
| C32 cLMobilityExtMCTotalClientCount | 1.3.6.1.4.1.9.9.846.1.1.4.13 | Counter32 | read-only | This object indicates the total client count on Mobility Controller. |
| U32 cLMobilityExtMCTotalNumberOfReportedAPs | 1.3.6.1.4.1.9.9.846.1.1.1.17 | Unsigned32 | read-only | This object indicates the total number of APs reported by this MC, its peer MCs and its MAs. |
| C32 cLMobilityExtMCWgbCount | 1.3.6.1.4.1.9.9.846.1.1.4.14 | Counter32 | read-only | This object indicates the WGB(Work Group Bridge) count on Mobility Controller. |
| IP cLMobilityExtMgrAddress | 1.3.6.1.4.1.9.9.846.1.1.2.2 | InetAddress | read-only | This object indicates the mobility manager's IP address. The type of this address is determined by the value of cLMobilityExtMgrAddressType. |
| IPt cLMobilityExtMgrAddressType | 1.3.6.1.4.1.9.9.846.1.1.2.1 | InetAddressType | read-only | This object indicates the mobility manager's IP address type. The mobility manager is the management entity of MC or MA. |
| INT cLMobilityExtMgrInterfaceType | 1.3.6.1.4.1.9.9.846.1.1.2.8 | INTEGER | read-only | This object indicates the mobility manager interface type. It can be of two types: management(1) - For in-band management of the controller. ap(2) - For L3 communications between the controller and LWAPP APs. |
| MAC cLMobilityExtMgrMacAddress | 1.3.6.1.4.1.9.9.846.1.1.2.5 | MacAddress | read-only | This object indicates the mac address for this mobility manager. |
| STR cLMobilityExtMgrName | 1.3.6.1.4.1.9.9.846.1.1.2.7 | SnmpAdminString | read-write | This object specifies the name for this mobility manager. |
| IP cLMobilityExtMgrNetmask | 1.3.6.1.4.1.9.9.846.1.1.2.4 | InetAddress | read-only | This object indicates the mobility manager's netmask. The type of this address is determined by the value of cLMobilityExtMgrNetmaskType. |
| IPt cLMobilityExtMgrNetmaskType | 1.3.6.1.4.1.9.9.846.1.1.2.3 | InetAddressType | read-only | This object indicates the mobility manager's netmask type. |
| VLA cLMobilityExtMgrVlanId | 1.3.6.1.4.1.9.9.846.1.1.2.6 | VlanIndex | read-only | This object indicates the VLAN ID for this mobility manager. |
| IP cLMobilityExtMOClientAddress | 1.3.6.1.4.1.9.9.846.1.2.7.1.11 | InetAddress | read-only | This object indicates the client IP address. The type of this address is determined by the value of cLMobilityExtMOClientAddressType. |
| IPt cLMobilityExtMOClientAddressType | 1.3.6.1.4.1.9.9.846.1.2.7.1.10 | InetAddressType | read-only | This object indicates the client IP address type. |
| IP cLMobilityExtMOClientAnchorMCPrivateAddress | 1.3.6.1.4.1.9.9.846.1.2.7.1.5 | InetAddress | read-only | This object indicates the client's anchor MC private IP address. The type of this address is determined by the value of cLMobilityExtMOClientAnchorMCPrivateAddressType. |
| IPt cLMobilityExtMOClientAnchorMCPrivateAddressType | 1.3.6.1.4.1.9.9.846.1.2.7.1.4 | InetAddressType | read-only | This object indicates the client's anchor MC private IP address type. |
| IP cLMobilityExtMOClientAnchorMCPublicAddress | 1.3.6.1.4.1.9.9.846.1.2.7.1.3 | InetAddress | read-only | This object indicates the client's anchor MC public IP address. The type of this address is determined by the value of cLMobilityExtMOClientAnchorMCPublicAddressType. |
| IPt cLMobilityExtMOClientAnchorMCPublicAddressType | 1.3.6.1.4.1.9.9.846.1.2.7.1.2 | InetAddressType | read-only | This object indicates the client's anchor MC public IP address type. |
| IP cLMobilityExtMOClientAssociatedMCPrivateAddress | 1.3.6.1.4.1.9.9.846.1.2.7.1.9 | InetAddress | read-only | This object indicates the client's associated MC (local or foreign) private IP address. The type of this address is determined by the value of cLMobilityExtMOClientAssociatedMCPrivateAddressType. |
| IPt cLMobilityExtMOClientAssociatedMCPrivateAddressType | 1.3.6.1.4.1.9.9.846.1.2.7.1.8 | InetAddressType | read-only | This object indicates the client's associated MC (local or foreign) private IP address type. |
| IP cLMobilityExtMOClientAssociatedMCPublicAddress | 1.3.6.1.4.1.9.9.846.1.2.7.1.7 | InetAddress | read-only | This object indicates the client's associated MC (local or foreign) public IP address. The type of this address is determined by the value of cLMobilityExtMOClientAssociatedMCPublicAddressType. |
| IPt cLMobilityExtMOClientAssociatedMCPublicAddressType | 1.3.6.1.4.1.9.9.846.1.2.7.1.6 | InetAddressType | read-only | This object indicates the client's associated MC (local or foreign) public IP address type. |
| C64 cLMobilityExtMOClientAssociationTime | 1.3.6.1.4.1.9.9.846.1.2.7.1.13 | Counter64 | read-only | This object represents the client's association time. The object cLMobilityExtMOClientUpTime represents the up time of the MO client since its association cLMobilityExtMOClientAssociationTime object is superseded by cLMobilityExtMOClientUpTime. |
| cLMobilityExtMOClientEntry | 1.3.6.1.4.1.9.9.846.1.2.7.1 | not-accessible | Each entry in this table represents information about one 802.11 LWAPP mobility Clients on this MO. | |
| DAT cLMobilityExtMOClientLocalTime | 1.3.6.1.4.1.9.9.846.1.2.7.1.12 | DateAndTime | read-only | This object indicates the client's local time. |
| MAC cLMobilityExtMOClientMacAddress | 1.3.6.1.4.1.9.9.846.1.2.7.1.1 | MacAddress | not-accessible | This object represents the client MAC address. |
| cLMobilityExtMOClientTable | 1.3.6.1.4.1.9.9.846.1.2.7 | not-accessible | This table contains the information about the 802.11 LWAPP Mobility Clients on this MO. | |
| NUM cLMobilityExtMOClientUpTime | 1.3.6.1.4.1.9.9.846.1.2.7.1.14 | CiscoAbsZeroBasedCounter64 | read-only | This object indicates the client's up time since its association. |
| IP cLMobilityExtMOMCAddress | 1.3.6.1.4.1.9.9.846.1.2.5.1.2 | InetAddress | not-accessible | This object represents the MC's IP address. The type of this address is determined by the value of cLMobilityExtMOMCAddressType. |
| IPt cLMobilityExtMOMCAddressType | 1.3.6.1.4.1.9.9.846.1.2.5.1.1 | InetAddressType | not-accessible | This object represents the MC's IP address type. |
| U32 cLMobilityExtMOMCClientCount | 1.3.6.1.4.1.9.9.846.1.2.5.1.5 | Unsigned32 | read-only | This object indicates the number of clients associated to the MC. |
| cLMobilityExtMOMCEntry | 1.3.6.1.4.1.9.9.846.1.2.5.1 | not-accessible | Each entry in this table represents information about one 802.11 LWAPP Mobility Controller on this MO. | |
| INT cLMobilityExtMOMCLinkStatus | 1.3.6.1.4.1.9.9.846.1.2.5.1.4 | INTEGER | read-only | This object indicates the operational and connectivity status of the MC. notconfigured(0) - This means MC is not configured for ICMP or EoIP pings. datapathdown(1) - This means MC is not responding to EoIP pings. controlpathdown(2) - This means successive ICMP pings to the MC have failed. bothdown(3) - This means MC is not responding to ICMP or EOIP pings. up(4) - This means MC is responding to both EOIP and ICMP pings. |
| MAC cLMobilityExtMOMCMacAddress | 1.3.6.1.4.1.9.9.846.1.2.5.1.3 | MacAddress | read-only | This object indicates the MC's MAC address. |
| cLMobilityExtMOMCTable | 1.3.6.1.4.1.9.9.846.1.2.5 | not-accessible | This table contains the information about the 802.11 LWAPP Mobility Controllers on this MO. | |
| T/F cLMobilityExtNewArchitectureAdminEnableStatus | 1.3.6.1.4.1.9.9.846.1.1.2.10 | TruthValue | read-write | This object specifies users to enable or disable new mobility feature. A value of 'true' indicates new mobility is enabled. A value of 'false' indicates new mobility is disabled. |
| T/F cLMobilityExtNewArchitectureEnableStatus | 1.3.6.1.4.1.9.9.846.1.1.2.9 | TruthValue | read-only | This object indicates the current status of the new mobility feature. A value of 'true' indicates new mobility is enabled. A value of 'false' indicates new mobility is disabled. |
| INT cLMobilityExtNotifyObjectDestinationType | 1.3.6.1.4.1.9.9.846.1.3.4 | INTEGER | accessible-for-notify | This object represents the mobility destination type. unknown(0) - The destination of the messages is unknown. mobilityAgent(1) - The destination of the messages is Mobility Agent. mobilityController(2) - The destination of the messages is Mobility Controller. mobilityOracle(3) - The destination of the messages is Mobility Oracle. |
| IP cLMobilityExtNotifyObjectSourceIPAddress | 1.3.6.1.4.1.9.9.846.1.3.2 | InetAddress | accessible-for-notify | This object represents the sourc address. The type of this address is determined by the value of cLMobilityExtNotifyObjectSourceIPAddressType. |
| IPt cLMobilityExtNotifyObjectSourceIPAddressType | 1.3.6.1.4.1.9.9.846.1.3.1 | InetAddressType | accessible-for-notify | This object represents the source address type. |
| INT cLMobilityExtNotifyObjectSourceType | 1.3.6.1.4.1.9.9.846.1.3.3 | INTEGER | accessible-for-notify | This object represents mobility source type. unknown(0) - The source of the messages is unknown. mobilityAgent(1) - The source of the messages is Mobility Agent. mobilityController(2) - The source of the messages is Mobility Controller. mobilityOracle(3) - The source of the messages is Mobility Oracle. |
| C32 cLMobilityExtReceivedTotal | 1.3.6.1.4.1.9.9.846.1.1.6.1 | Counter32 | read-only | This object indicates the total received . |
| INT cLMobilityExtSecureCipher | 1.3.6.1.4.1.9.9.846.1.1.2.11 | INTEGER | read-write | This object specifies to configure secure ciphers, AES256+SHA or AES256+SHA2 for mobility tunnel. disable(1) - Implies that controllers will continue to use default ciphers for mobility tunnel. aes256sha1(2) - Implies that controllers will use AES256_SHA cipher for mobility tunnel. aes256sha2(3) - Implies that controllers will use AES256_SHA256 cipher for mobility tunnel. |
| U32 cLMobilityExtSpgBridgeDomainId | 1.3.6.1.4.1.9.9.846.1.2.1.1.3 | Unsigned32 | read-create | This object specifies the bridge domain ID for this SPG. |
| cLMobilityExtSpgEntry | 1.3.6.1.4.1.9.9.846.1.2.1.1 | not-accessible | Each entry in this table represents information about one 802.11 LWAPP mobility SPG configured on this controller. | |
| U32 cLMobilityExtSpgGroupId | 1.3.6.1.4.1.9.9.846.1.2.1.1.2 | Unsigned32 | read-create | This object specifies the group ID for this SPG. This object is used in the control data packet for SPG. |
| STR cLMobilityExtSpgGroupName | 1.3.6.1.4.1.9.9.846.1.2.1.1.1 | SnmpAdminString | not-accessible | This object represents the group name for this SPG. |
| U32 cLMobilityExtSpgMemberCount | 1.3.6.1.4.1.9.9.846.1.2.1.1.4 | Unsigned32 | read-only | This object indicates the number of members on this SPG. |
| cLMobilityExtSpgMemberEntry | 1.3.6.1.4.1.9.9.846.1.2.2.1 | not-accessible | Each entry in this table represents information about one 802.11 LWAPP mobility SPG member configured on this controller. | |
| IP cLMobilityExtSpgMemberPrivateAddress | 1.3.6.1.4.1.9.9.846.1.2.2.1.2 | InetAddress | not-accessible | This object represents the member's private IP address. The type of this address is determined by the value of cLMobilityExtSpgMemberPrivateAddressType. |
| IPt cLMobilityExtSpgMemberPrivateAddressType | 1.3.6.1.4.1.9.9.846.1.2.2.1.1 | InetAddressType | not-accessible | This object represents the member's private IP address type. |
| IP cLMobilityExtSpgMemberPublicAddress | 1.3.6.1.4.1.9.9.846.1.2.2.1.5 | InetAddress | read-create | This object specifies the member's public IP address. The type of this address is determined by the value of cLMobilityExtSpgMemberPublicAddressType. |
| IPt cLMobilityExtSpgMemberPublicAddressType | 1.3.6.1.4.1.9.9.846.1.2.2.1.4 | InetAddressType | read-create | This object specifies the member's public IP address type. |
| ROW cLMobilityExtSpgMemberRowStatus | 1.3.6.1.4.1.9.9.846.1.2.2.1.6 | RowStatus | read-create | This is the status column for this row and used to create and delete specific instances of rows in this table. |
| INT cLMobilityExtSpgMemberStatus | 1.3.6.1.4.1.9.9.846.1.2.2.1.3 | INTEGER | read-only | This object indicates the operational and connectivity status of the member. notconfigured(0) - This means group member is not configured for ICMP or EoIP pings. datapathdown(1) - This means group member is not responding to EoIP pings. controlpathdown(2) - This means successive ICMP pings to the group member have failed. bothdown(3) - This means group member is not responding to ICMP or EOIP pings. up(4) - This means group member is responding to both EOIP and ICMP pings. |
| cLMobilityExtSpgMemberTable | 1.3.6.1.4.1.9.9.846.1.2.2 | not-accessible | This table contains the information about the 802.11 LWAPP mobility Switch Peer Group (SPG) members. | |
| IP cLMobilityExtSpgMulticastAddress | 1.3.6.1.4.1.9.9.846.1.2.1.1.6 | InetAddress | read-create | This object specifies the member's multicast IP address. The type of this address is determined by the value of cLMobilityExtSpgMulticastAddressType. |
| IPt cLMobilityExtSpgMulticastAddressType | 1.3.6.1.4.1.9.9.846.1.2.1.1.5 | InetAddressType | read-create | This object specifies the member's multicast IP address type. |
| T/F cLMobilityExtSpgMulticastMode | 1.3.6.1.4.1.9.9.846.1.2.1.1.7 | TruthValue | read-create | This object specifies the user to enable or disable multicast mode. A value of 'true' indicates multicast mode is enabled. A value of 'false' indicates multicast mode is disabled. |
| ROW cLMobilityExtSpgRowStatus | 1.3.6.1.4.1.9.9.846.1.2.1.1.9 | RowStatus | read-create | This is the status column for this row and used to create and delete specific instances of rows in this table. |
| STO cLMobilityExtSpgStorageType | 1.3.6.1.4.1.9.9.846.1.2.1.1.8 | StorageType | read-create | This object specifies the storage type for this conceptual row. |
| cLMobilityExtSpgTable | 1.3.6.1.4.1.9.9.846.1.2.1 | not-accessible | This table contains the information about the 802.11 LWAPP mobility Switch Peer Group (SPG). | |
| C32 cLMobilityExtTotalResourceAllocation | 1.3.6.1.4.1.9.9.846.1.1.6.3 | Counter32 | read-only | This object indicates the total resources allocated . |
| C32 cLMobilityExtTotalResourceFree | 1.3.6.1.4.1.9.9.846.1.1.6.4 | Counter32 | read-only | This object indicates the total resources free . |
| C32 cLMobilityExtTransmitTotal | 1.3.6.1.4.1.9.9.846.1.1.6.2 | Counter32 | read-only | This object indicates the total transmitted. |
| STR cLMobilityExtWlanPolicyName | 1.3.6.1.4.1.9.9.846.1.3.5 | SnmpAdminString | accessible-for-notify | This object specifies one instance of a WLAN policy on the controller |
| cLMobilityExtWlanPolicyNameGroup | 1.3.6.1.4.1.9.9.846.2.2.8 | This object specifies one instance of a WLAN policy on the controller |
RFC description
Provides configuration and status information about 802.11 WLAN mobility for Cisco Central Controllers terminating LWAPP Access Points.
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.