All MIBs › CISCO-SWITCH-QOS-MIB
Organization: Cisco Systems, Inc.
Last Updated: 2016-06-30
Category: Cisco Devices, Quality of Service
Description: Manages QoS queuing, scheduling, and marking configuration on Cisco Catalyst switch ASICs and ports.
Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.
What Is CISCO-SWITCH-QOS-MIB?
This Cisco MIB extends CISCO-CLASS-BASED-QOS-MIB with configuration and statistics specific to Layer 2/3 switching QoS on Cisco Catalyst-class switches operating within (or at the edge of) a single QoS domain. It exposes mostly configuration data - CoS-to-DSCP and IP-precedence-to-DSCP mappings, port queueing mode, marking behavior, and policer/redirect settings - along with enable flags for marking statistics collection. Its monitoring role centers on software/configuration status: verifying that QoS classification and marking policy is correctly programmed and active on switch hardware, rather than reporting temperature, CPU, or fan health. It has an explicit, stated dependency on CISCO-CLASS-BASED-QOS-MIB, which it extends. Typical deployment is at a QoS domain boundary switch where CoS/DSCP/MPLS-EXP mappings and marking need to be verified for correct trust and reclassification behavior. Engineers can download the CISCO-SWITCH-QOS-MIB file directly to load it into their MIB browser.
IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-SWITCH-QOS-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.
Supported Devices
- Cisco Catalyst Layer 2/3 switches
Monitoring Examples
csqCosToDscpTable/csqCosToDscpEntry rows expose csqCosToDscpCos paired with csqCosToDscpDscp so an admin can verify the active CoS-to-DSCP mapping, while csqIpPrecToDscpTable/csqIpPrecToDscpEntry does the same for IP precedence. Toggling and then polling csqMarkingStatisticsEnable lets an operator confirm marking statistics collection is active before troubleshooting a trust boundary, and csqPortQueueingModeEnable reveals whether a port is in the expected queueing mode. An unexpected DSCP value returned for a given CoS in csqCosToDscpTable would indicate a misconfigured or stale QoS policy on that switch.
What Can Be Monitored
- CoS-to-DSCP mapping configuration
- IP precedence-to-DSCP mapping
- QoS marking statistics enablement
- port queueing mode
- DSCP rewrite status
- policer/redirected-traffic settings
This MIB depends on
Related MIBs
Imported Objects
From CISCO-QOS-PIB-MIB
| Percent | |
| QosLayer2Cos |
From CISCO-QOS-TC-MIB
| QosIpPrecedence | |
| QosMplsExpValue | |
| QosMutationMapName | |
| QosMutationMapNameOrEmpty | |
| QosPolicerType | |
| QosQueueNumber | |
| QosThresholdNumber |
From CISCO-SMI
| ciscoMgmt | OBJECT-IDENTITY |
From DIFFSERV-DSCP-TC
| Dscp |
From DIFFSERV-MIB
| IfDirection |
From ENTITY-MIB
| entPhysicalIndex | OBJECT-TYPE |
From IF-MIB
| ifIndex | OBJECT-TYPE |
From SNMP-FRAMEWORK-MIB
| SnmpAdminString |
From SNMPv2-CONF
| MODULE-COMPLIANCE | |
| OBJECT-GROUP |
From SNMPv2-SMI
| Counter32 | |
| Counter64 | |
| MODULE-IDENTITY | |
| OBJECT-TYPE | |
| Unsigned32 |
From SNMPv2-TC
| RowStatus | |
| TEXTUAL-CONVENTION | |
| TruthValue |
How to Use in IPNetwork Monitor
Example using csqIfStatsDropPkts OID:
Select a Cisco Catalyst Layer 2/3 switch (QoS) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type csqIfStatsDropPkts into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of packets that have been received then dropped from the interface because they exceeded the threshold value configured at this queue and threshold of this interface. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter64-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases between polls, since a rising count of errors, failures, or discards often points to a real underlying problem. Click Finish to create the monitor; you can adjust any parameter later.
OIDs
| OID symbolic | OID numeric | Type | Access | Description |
|---|---|---|---|---|
| ciscoSwitchQosDscpRewriteGroup | 1.3.6.1.4.1.9.9.580.2.2.10 | A collection of object which provides DSCP rewrite information. | ||
| ciscoSwitchQosHwServicePoolUsageGroup | 1.3.6.1.4.1.9.9.580.2.2.33 | A collection of object which provides the statistics of each hardware service pool. | ||
| ciscoSwitchQosIfCCGroup | 1.3.6.1.4.1.9.9.580.2.2.14 | A collection of object which provides information on interface consistency check configuration. | ||
| ciscoSwitchQosIfConfigGroup | 1.3.6.1.4.1.9.9.580.2.2.3 | A collection of object which provides QoS configuration at an interface. | ||
| ciscoSwitchQosIfCosToQueueGroup | 1.3.6.1.4.1.9.9.580.2.2.4 | A collection of objects which provides CoS assignment information at an interface. | ||
| ciscoSwitchQosIfDropConfigGroup | 1.3.6.1.4.1.9.9.580.2.2.5 | A collection of objects which provides drop threshold information at an interface. | ||
| ciscoSwitchQosIfDscpAssignGroup | 1.3.6.1.4.1.9.9.580.2.2.9 | A collection of objects which provides DSCP to queue assignment information at an interface. | ||
| ciscoSwitchQosIfLanQueuingGroup | 1.3.6.1.4.1.9.9.580.2.2.23 | A collection of object which provides LAN queueing mapping information for each QoS capable interface. | ||
| ciscoSwitchQosIfModeConfigGroup | 1.3.6.1.4.1.9.9.580.2.2.15 | A collection of object which provides information on QoS mode configuration. | ||
| ciscoSwitchQosIfPriGrpInBufUsageGroup | 1.3.6.1.4.1.9.9.580.2.2.29 | A collection of object which provides the statistics of each priority group on the interface. | ||
| ciscoSwitchQosIfQosGroupInfoGroup | 1.3.6.1.4.1.9.9.580.2.2.27 | A collection of object which provides information for each QoS group on an interface. | ||
| ciscoSwitchQosIfQosGroupInfoShapeGroup | 1.3.6.1.4.1.9.9.580.2.2.32 | A collection of object which provides shape information for each QoS group on an interface. | ||
| ciscoSwitchQosIfQosGroupStatsGroup | 1.3.6.1.4.1.9.9.580.2.2.28 | A collection of object which provides the statistics of each QoS group on an interface. | ||
| ciscoSwitchQosIfQueueBufferGroup | 1.3.6.1.4.1.9.9.580.2.2.24 | A collection of object which provides tail drop queue buffer information for each QoS capable interface. | ||
| ciscoSwitchQosIfQueueGroup | 1.3.6.1.4.1.9.9.580.2.2.6 | A collection of objects which provides queue information at an interface. | ||
| ciscoSwitchQosIfQueueingGroup | 1.3.6.1.4.1.9.9.580.2.2.26 | A collection of object which provides queueing information for each QoS capable interface. | ||
| ciscoSwitchQosIfQueueModeGroup | 1.3.6.1.4.1.9.9.580.2.2.22 | A collection of object which provides queue mode information for each QoS capable interface. | ||
| ciscoSwitchQosIfQueueSchedulingGroup | 1.3.6.1.4.1.9.9.580.2.2.25 | A collection of object which provides queue scheduling information for each QoS capable interface. | ||
| ciscoSwitchQosIfStatsExtGroup | 1.3.6.1.4.1.9.9.580.2.2.18 | A collection of objects which provides additional interface QoS statistics information. | ||
| ciscoSwitchQosIfStatsGroup | 1.3.6.1.4.1.9.9.580.2.2.7 | A collection of object which provides drop packets information at an interface. | ||
| ciscoSwitchQosMappingGroup | 1.3.6.1.4.1.9.9.580.2.2.1 | A collection of objects which provides the QoS mapping information in the device. | ||
| ciscoSwitchQosMarkingStatsGroup | 1.3.6.1.4.1.9.9.580.2.2.13 | A collection of object which provides information on marking statistics configuration. | ||
| ciscoSwitchQosMIB | 1.3.6.1.4.1.9.9.580 | This MIB module extends the CISCO-CLASS-BASED-QOS-MIB by defining configuration and statistics information specific to the quality of service (QoS) features of Layer2/3 switch functionality implemented in Cisco devices. It is applicable to a device which is fully within a single QoS domain, although one or more boundaries with other QoS domains can be immediately adjacent to this device. Configuration information available through this MIB includes: + Mappings between CoS, IP Precedence, MPLS-EXP value to DSCP value and vice versa for classification purpose. + Device level QoS configuration for DSCP rewrite, policing of ACL-redirected traffic, QoS port-queueing mode, statistics collection for policy that sets a trust state. + CoS, MPLS-EXP and DSCP mutation map name and mappings. These mutations can be configured so that they change the content of packets which cross QoS boundaries, either as they enter or leave this device. + Interface QoS configuration such as default CoS value, trust state, packet assignment to queue and threshold based on CoS or DSCP value, drop algorithm and corresponding parameters, queue scheduling parameter such as WRR (Weighted Round Robin) weights, queue size allocation weight. Statistics available through this MIB includes: + Per module Multi-Layer Switching QoS statistics. + Per interface QoS queueing statistics. The following terms are used throughout this MIB: DSCP (Differentiated Services Code Point) is the six most significant bits of the ToS field in a IP packet header. DSCP Mutation: when a packet is being forwarded across an IP network, the previous hop(s) and the following hop(s) of a device may reside in a different QoS domain. A QoS domain refers to the set of QoS rules and conventions adopted by an administrative entity. For instance, a set of DSCP values may have a different meaning in different domains. DSCP mutation allows a DSCP set to be mutated or transformed in order to maintain semantic compatibility between adjacent domains. The mutation is done via mapping tables which maps the old DSCP value from one domain to a new DSCP value in the other domain. DSCP Mutation is applied to egress traffic. IP precedence is the three most significant bits of the ToS field in a IP packet header. CoS (Class of Service) is the three bits in the layer 2 header that indicates user priority value assigned to this packet. Trust state is a parameter configured at an interface to specify which QoS markings in packets arriving at that interface are acceptable as-is, rather than needing to be ignored/overwritten due to an 'untrusted' source or previous hop. BPDU (Bridge Protocol Data Unit) is used by bridges in a network to exchange information regarding their status. The Spanning Tree Protocol uses the BPDU information to elect the root switch and root port for the switched network. MPLS-EXP: MPLS experimental field in MPLS label. MTU: Maximum Transmission Unit. | ||
| ciscoSwitchQosMIBCompliance | 1.3.6.1.4.1.9.9.580.2.1.1 | The compliance statement for the CISCO-SWITCH-QOS-MIB. This compliance is superceded by ciscoSwitchQosMIBComplianceRev2. | ||
| ciscoSwitchQosMIBComplianceRev2 | 1.3.6.1.4.1.9.9.580.2.1.2 | The compliance statement for the CISCO-SWITCH-QOS-MIB. This compliance is superceded by ciscoSwitchQosMIBComplianceRev3. | ||
| ciscoSwitchQosMIBComplianceRev3 | 1.3.6.1.4.1.9.9.580.2.1.3 | The compliance statement for the CISCO-SWITCH-QOS-MIB. This compliance is superceded by ciscoSwitchQosMIBComplianceRev4. | ||
| ciscoSwitchQosMIBComplianceRev4 | 1.3.6.1.4.1.9.9.580.2.1.4 | The compliance statement for the CISCO-SWITCH-QOS-MIB. This compliance is deprecated and superceded by ciscoSwitchQosMIBComplianceRev5. | ||
| ciscoSwitchQosMIBComplianceRev5 | 1.3.6.1.4.1.9.9.580.2.1.5 | The compliance statement for the CISCO-SWITCH-QOS-MIB. | ||
| ciscoSwitchQosMIBComplianceRev6 | 1.3.6.1.4.1.9.9.580.2.1.6 | The compliance statement for the CISCO-SWITCH-QOS-MIB. | ||
| ciscoSwitchQosMIBComplianceRev7 | 1.3.6.1.4.1.9.9.580.2.1.7 | The compliance statement for the CISCO-SWITCH-QOS-MIB. | ||
| ciscoSwitchQosMIBComplianceRev8 | 1.3.6.1.4.1.9.9.580.2.1.8 | The compliance statement for the CISCO-SWITCH-QOS-MIB. | ||
| ciscoSwitchQosMIBCompliances | 1.3.6.1.4.1.9.9.580.2.1 | |||
| ciscoSwitchQosMIBConformance | 1.3.6.1.4.1.9.9.580.2 | |||
| ciscoSwitchQosMIBGroups | 1.3.6.1.4.1.9.9.580.2.2 | |||
| ciscoSwitchQosMIBNotifs | 1.3.6.1.4.1.9.9.580.0 | |||
| ciscoSwitchQosMIBObjects | 1.3.6.1.4.1.9.9.580.1 | |||
| ciscoSwitchQosModuleClassChangedGroup | 1.3.6.1.4.1.9.9.580.2.2.20 | A collection of object which provides CoS/Traffic Class changed packets count information for each module. | ||
| ciscoSwitchQosModuleDscpRewriteGroup | 1.3.6.1.4.1.9.9.580.2.2.19 | A collection of object which provides DSCP rewrite information for each module. | ||
| ciscoSwitchQosModuleStatsExtGroup | 1.3.6.1.4.1.9.9.580.2.2.17 | A collection of object which provides additional QoS statistics information at each QoS capable module. | ||
| ciscoSwitchQosModuleStatsGroup | 1.3.6.1.4.1.9.9.580.2.2.8 | A collection of object which provides QoS statistics information at each QoS capable module. | ||
| ciscoSwitchQosMutationGroup | 1.3.6.1.4.1.9.9.580.2.2.2 | A collection of objects which provides the QoS mutation information in the device. | ||
| ciscoSwitchQosPolicerUsageGroup | 1.3.6.1.4.1.9.9.580.2.2.16 | A collection of objects which provides information on QoS policer usage. | ||
| ciscoSwitchQosPortQueueingGroup | 1.3.6.1.4.1.9.9.580.2.2.12 | A collection of object which provides information on port-queuing mode. | ||
| ciscoSwitchQosRedirectPolicingGroup | 1.3.6.1.4.1.9.9.580.2.2.11 | A collection of object which provides information on policing of ACL-redirected traffic. | ||
| ciscoSwitchQosServicePoolCellSizeGroup | 1.3.6.1.4.1.9.9.580.2.2.31 | A collection of object which indicates the number of bytes for a service pool cell. | ||
| ciscoSwitchQosServicePoolUsageGroup | 1.3.6.1.4.1.9.9.580.2.2.30 | A collection of object which provides the statistics of each service pool. | ||
| ciscoSwitchQosServicePoolUsageTxGroup | 1.3.6.1.4.1.9.9.580.2.2.34 | A collection of object which provides the statistics of each output service pool. | ||
| ciscoSwitchQosTenGOnlyModeGroup | 1.3.6.1.4.1.9.9.580.2.2.21 | A collection of object which provides 10Gigabit Ethernet only mode information. | ||
| csqCosMutationEntry | 1.3.6.1.4.1.9.9.580.1.3.2.1 | not-accessible | Each row contains the status of this instance. A row instance can be created or removed by setting the appropriate value of its RowStatus object. Once the number of entries in this table reaches the maximum number of CoS mutation map supported in the device denoted by csqMaxCosMutationMap object, user must delete an existing entry in this table in order to create a new entry. | |
| QOS csqCosMutationFromCos | 1.3.6.1.4.1.9.9.580.1.3.3.1.1 | QosLayer2Cos | not-accessible | The input CoS value being mapped to the output CoS value in this mutation map. |
| QOS csqCosMutationMapName | 1.3.6.1.4.1.9.9.580.1.3.2.1.1 | QosMutationMapName | not-accessible | The name of the CoS mutation map. |
| csqCosMutationMappingEntry | 1.3.6.1.4.1.9.9.580.1.3.3.1 | not-accessible | Each row contains the mapping from a CoS value to another CoS value. When the entry for csqCosMutationMapName in the csqCosMutationTable is created, corresponding entries in this table are initialized with a default mapping which is the identity function. When the entry for csqCosMutationMapName in the csqCosMutationTable is removed, corresponding entries in this table will also be deleted. | |
| csqCosMutationMappingTable | 1.3.6.1.4.1.9.9.580.1.3.3 | not-accessible | This table provides management information for CoS mutation mapping. CoS mutation is applied to ingress traffic. This mutation occurs before the CoS to DSCP mapping for applicable traffic as specified in csqCosToDscpTable. | |
| ROW csqCosMutationRowStatus | 1.3.6.1.4.1.9.9.580.1.3.2.1.2 | RowStatus | read-create | This object is used to manage the creation and deletion of rows in this table. |
| csqCosMutationTable | 1.3.6.1.4.1.9.9.580.1.3.2 | not-accessible | This table indicates CoS mutation maps in the device. | |
| QOS csqCosMutationToCos | 1.3.6.1.4.1.9.9.580.1.3.3.1.2 | QosLayer2Cos | read-write | The output CoS value which the input CoS value maps to. |
| QOS csqCosToDscpCos | 1.3.6.1.4.1.9.9.580.1.2.1.1.1 | QosLayer2Cos | not-accessible | The CoS value being mapped to the DSCP value. |
| DSC csqCosToDscpDscp | 1.3.6.1.4.1.9.9.580.1.2.1.1.2 | Dscp | read-write | The DSCP value which the CoS value maps to. |
| csqCosToDscpEntry | 1.3.6.1.4.1.9.9.580.1.2.1.1 | not-accessible | Each row contains the mapping from a CoS value to a DSCP value. | |
| csqCosToDscpTable | 1.3.6.1.4.1.9.9.580.1.2.1 | not-accessible | This table contains the mapping of CoS values to DSCP values. This mapping table consist of eight CoS values (0 through 7) and their corresponding DSCP values. The mapping given by this table is used for all packets received on an interface if and only if that interface has a trust state, as given by the value of csqIfTrustState for the interface, of 'trustCoS'. | |
| QOS csqDscpMappingCos | 1.3.6.1.4.1.9.9.580.1.2.4.1.2 | QosLayer2Cos | read-write | The CoS value which the DSCP values maps to. |
| DSC csqDscpMappingDscp | 1.3.6.1.4.1.9.9.580.1.2.4.1.1 | Dscp | not-accessible | The DSCP value being mapped to the CoS, EXP and policed DSCP value. |
| csqDscpMappingEntry | 1.3.6.1.4.1.9.9.580.1.2.4.1 | not-accessible | Each row contains the mapping from DSCP value to CoS value, MPLS-EXP value and policed DSCP. | |
| QOS csqDscpMappingExp | 1.3.6.1.4.1.9.9.580.1.2.4.1.3 | QosMplsExpValue | read-write | The MPLS-EXP value which the DSCP values maps to. |
| DSC csqDscpMappingMaxBurstDscp | 1.3.6.1.4.1.9.9.580.1.2.4.1.5 | Dscp | read-write | The maximum burst policed DSCP value which the DSCP values maps to. |
| DSC csqDscpMappingNormalBurstDscp | 1.3.6.1.4.1.9.9.580.1.2.4.1.4 | Dscp | read-write | The normal burst policed DSCP value which the DSCP values maps to. |
| csqDscpMappingTable | 1.3.6.1.4.1.9.9.580.1.2.4 | not-accessible | This table always has 64 entries, one for each DSCP value. The table contains four mappings from the DSCP value assigned to a packet. One mapping is to the egress CoS to be stored in the layer-2 frame headers for output on 802.1Q or ISL interfaces. Another mapping is to the EXP value to be stored in MPLS label. The other two mappings are to the remarked (or 'marked down') DSCP values which are used when a policer requires that a packet's DSCP value to be modified. Of these two mappings, one is for a normal burst, and the other is for maximum burst. | |
| csqDscpMutationEntry | 1.3.6.1.4.1.9.9.580.1.3.5.1 | not-accessible | Each row contains the status of this instance. A row instance can be created or removed by setting the appropriate value of its RowStatus object. Once the number of entries in this table reaches the maximum number of DSCP mutation map supported in the device denoted by csqMaxDscpMutationMap object, user must delete an existing entry in this table in order to create a new entry. | |
| DSC csqDscpMutationFromDscp | 1.3.6.1.4.1.9.9.580.1.3.6.1.1 | Dscp | not-accessible | The input DSCP value being mapped to the output DSCP value in this mutation map. |
| QOS csqDscpMutationMapName | 1.3.6.1.4.1.9.9.580.1.3.5.1.1 | QosMutationMapName | not-accessible | The name of the DSCP mutation map. |
| csqDscpMutationMappingEntry | 1.3.6.1.4.1.9.9.580.1.3.6.1 | not-accessible | Each row contains the mapping from an input DSCP value to an output DSCP value. When the entry for csqDscpMutationMapName in the csqDscpMutationTable is created, corresponding entries in this table are initialized with a default mapping which is the identity function. When the entry for csqDscpMutationMapName in the csqDscpMutationTable is removed, corresponding entries in this table will also be deleted. | |
| csqDscpMutationMappingTable | 1.3.6.1.4.1.9.9.580.1.3.6 | not-accessible | This table provides management information for DSCP mutation mapping. DSCP mutation is applied to egress traffic. This mutation occurs after the mappings specified in csqDscpMappingTable. | |
| ROW csqDscpMutationRowStatus | 1.3.6.1.4.1.9.9.580.1.3.5.1.2 | RowStatus | read-create | This object is used to manage the creation and deletion of rows in this table. |
| csqDscpMutationTable | 1.3.6.1.4.1.9.9.580.1.3.5 | not-accessible | This table indicates DSCP mutation maps in the device. | |
| DSC csqDscpMutationToDscp | 1.3.6.1.4.1.9.9.580.1.3.6.1.2 | Dscp | read-write | The output DSCP value which the input DSCP value maps to. |
| T/F csqDscpRewriteEnable | 1.3.6.1.4.1.9.9.580.1.1.1 | TruthValue | read-write | This object specifies whether DSCP rewrite is enabled at a device-level of granularity, i.e., 'true' = enabled and 'false' = disabled. If no other objects specify whether DSCP rewrite is enabled at any different level of granularity, then this object's value is not subject to any modifiers. However, some devices might support other object(s) which specify whether DSCP rewrite is enabled at different level(s) of granularity. For such devices, the value of this object takes precedence over the values of such other object(s) when the value of this object is 'false'; in contrast, when the value of this object is 'true', the values of such other objects take precedence over the value of this object. if 'true', all outgoing packets will have their DSCP value rewritten based on the result of classification, policing or DSCP mutation configured in the device. if 'false', all outgoing packets will have their DSCP values unchanged from they arrived. |
| csqExpMutationEntry | 1.3.6.1.4.1.9.9.580.1.3.8.1 | not-accessible | Each row contains the status of this instance. A row instance can be created or removed by setting the appropriate value of its RowStatus object. Once the number of entries in this table reaches the maximum number of EXP mutation map supported in the device denoted by csqMaxExpMutationMap object, user must delete an existing entry in this table in order to create a new entry. | |
| QOS csqExpMutationFromExp | 1.3.6.1.4.1.9.9.580.1.3.9.1.1 | QosMplsExpValue | not-accessible | The input EXP value being mapped to the output EXP value in this mutation map. |
| QOS csqExpMutationMapName | 1.3.6.1.4.1.9.9.580.1.3.8.1.1 | QosMutationMapName | not-accessible | The name of the EXP mutation map. |
| csqExpMutationMappingEntry | 1.3.6.1.4.1.9.9.580.1.3.9.1 | not-accessible | Each row contains the mapping from input EXP to output EXP value. When the entry for csqExpMutationMapName in the csqExpMutationTable is created, corresponding entries in this table are initialized with a default mapping which is the identity function. When the entry for csqExpMutationMapName in the csqExpMutationTable is removed, corresponding entries in this table will also be deleted. | |
| csqExpMutationMappingTable | 1.3.6.1.4.1.9.9.580.1.3.9 | not-accessible | This table provides management information for EXP mutation mapping. EXP mutation is applied to egress traffic. This mutation occurs after the mapping specified in csqExpToDscpTable. | |
| ROW csqExpMutationRowStatus | 1.3.6.1.4.1.9.9.580.1.3.8.1.2 | RowStatus | read-create | This object is used to manage the creation and deletion of rows in this table. |
| csqExpMutationTable | 1.3.6.1.4.1.9.9.580.1.3.8 | not-accessible | This table indicates EXP mutation maps in the device. | |
| QOS csqExpMutationToExp | 1.3.6.1.4.1.9.9.580.1.3.9.1.2 | QosMplsExpValue | read-write | The output EXP value which the input EXP value maps to. |
| DSC csqExpToDscpDscp | 1.3.6.1.4.1.9.9.580.1.2.3.1.2 | Dscp | read-write | The DSCP value which the EXP value maps to. |
| csqExpToDscpEntry | 1.3.6.1.4.1.9.9.580.1.2.3.1 | not-accessible | Each row contains the mapping from a EXP value to a DSCP value. | |
| QOS csqExpToDscpExp | 1.3.6.1.4.1.9.9.580.1.2.3.1.1 | QosMplsExpValue | not-accessible | The EXP value being mapped to the DSCP value. |
| csqExpToDscpTable | 1.3.6.1.4.1.9.9.580.1.2.3 | not-accessible | This table contains the mapping of MPLS-EXP values to DSCP values. This mapping table consist of eight MPLS-EXP values (0 through 7) and their corresponding DSCP values. | |
| csqGlobals | 1.3.6.1.4.1.9.9.580.1.1 | |||
| INT csqHwSharedPoolDeviceId | 1.3.6.1.4.1.9.9.580.1.5.8.1.1 | INTEGER | not-accessible | This object indicates an arbitrary number which uniquely identifies a specific internal device. |
| INT csqHwSharedPoolStatsDirection | 1.3.6.1.4.1.9.9.580.1.5.8.1.3 | INTEGER | not-accessible | This object indicates the flow direction of a specific traffic statistics. |
| INT csqHwSharedPoolStatsType | 1.3.6.1.4.1.9.9.580.1.5.8.1.4 | INTEGER | not-accessible | This object indicates the specific traffic classification type for hardware shared pool. drop - droppable traffic class nodrop - no drop traffic class span - span traffic class sup - sup traffic class. |
| csqHwSharedPoolUsageEntry | 1.3.6.1.4.1.9.9.580.1.5.8.1 | not-accessible | An entry indicates the utilization of an shared service pool for an internal device on a particular physical device, which is identified by a specific module(indicated by entPhysicalIndex in ENTITY-MIB), device ID (indicated by csqHwSharedPoolDeviceId), traffic direction (indicated by csqHwSharedPoolStatsDirection), instance (indicated by csqHwSharedPoolUsageInstNo) and statistic type (indicated by csqHwSharedPoolStatsType). The unit of the value of the objects is cell. A cell represents the number of bytes, which is indicated by scalar object csqServicePoolCellSize. | |
| U32 csqHwSharedPoolUsageInstNo | 1.3.6.1.4.1.9.9.580.1.5.8.1.2 | Unsigned32 | not-accessible | This object indicates an arbitrary number which uniquely identifies the instance number of a specific internal device. |
| U32 csqHwSharedPoolUsageRemain | 1.3.6.1.4.1.9.9.580.1.5.8.1.6 | Unsigned32 | read-only | This object indicates the remaining cells in a hardware shared pool. |
| U32 csqHwSharedPoolUsageShared | 1.3.6.1.4.1.9.9.580.1.5.8.1.7 | Unsigned32 | read-only | This object indicates the shared used cells in a hardware shared pool. |
| csqHwSharedPoolUsageTable | 1.3.6.1.4.1.9.9.580.1.5.8 | not-accessible | A table contains the utilization of the shared service pool for internal devices of a specific physical entity that is capable of providing this information. | |
| U32 csqHwSharedPoolUsageTotal | 1.3.6.1.4.1.9.9.580.1.5.8.1.8 | Unsigned32 | read-only | This object indicates the total cells in a hardware shared pool. |
| U32 csqHwSharedPoolUsageUsed | 1.3.6.1.4.1.9.9.580.1.5.8.1.5 | Unsigned32 | read-only | This object indicates the number of used cells in a hardware shared pool. |
| C64 csqIfBpduDropPkts | 1.3.6.1.4.1.9.9.580.1.5.4.1.1 | Counter64 | read-only | The total number of dropped BPDU packets. |
| csqIfConfigEntry | 1.3.6.1.4.1.9.9.580.1.4.1.1 | not-accessible | A row instance contains the default CoS value and trust state of a Qos manageable interface. | |
| INT csqIfConfigQueueMode | 1.3.6.1.4.1.9.9.580.1.4.1.1.4 | INTEGER | read-write | Specifies the queueing mode at this interface. 'cos' indicates that the interface is queueing a packet based on the CoS value of the packet. This value can only be set if the 'cos' bit of csqIfQueueModeCpb is set. 'dscp' indicates that the interface is queueing a packet based on the DSCP value of the packet. This value can only be set if the 'dscp' bit of csqIfQueueModeCpb is set. |
| csqIfConfigTable | 1.3.6.1.4.1.9.9.580.1.4.1 | not-accessible | This table provides QoS configuration for QoS manageable interface in the device. | |
| T/F csqIfConsistencyCheckEnable | 1.3.6.1.4.1.9.9.580.1.4.7.1.1 | TruthValue | read-write | Specifies if QoS-port attribute consitency check is enabled or disabled at the specified channel interface. If 'true', QoS-port attribute consistency check is enabled. If 'false', QoS-port attribute consistency check is disabled. |
| csqIfConsistencyCheckEntry | 1.3.6.1.4.1.9.9.580.1.4.7.1 | not-accessible | An entry containing QoS-port attribute consistency check information of Port Channel interface. | |
| csqIfConsistencyCheckTable | 1.3.6.1.4.1.9.9.580.1.4.7 | not-accessible | A table used to configure the QoS-port attribute consistency check for Port Channel interface identified by ifIndex. QoS-port attribute consistency check consists of but not limited to checking for members of a Port Channel interface having the same queue type. | |
| QOS csqIfCosMutationMap | 1.3.6.1.4.1.9.9.580.1.3.10.1.1 | QosMutationMapNameOrEmpty | read-create | This object specifies the name of CoS mutation map applied at this interface. If CoS mutation is not performed at the interface, then the value of this object is the zero-length string; otherwise, the value of this object must be the name of a row in the csqCosMutationTable. If a row in the csqCosMutationTable is deleted, all instances of this object which referenced the deleted row get changed to the zero-length string. |
| QOS csqIfCosToQueueCos | 1.3.6.1.4.1.9.9.580.1.4.2.1.2 | QosLayer2Cos | not-accessible | The CoS value of the packet which the queue and threshold assignment is based on. |
| IFD csqIfCosToQueueDirection | 1.3.6.1.4.1.9.9.580.1.4.2.1.1 | IfDirection | not-accessible | The traffic direction of a packet. |
| csqIfCosToQueueEntry | 1.3.6.1.4.1.9.9.580.1.4.2.1 | not-accessible | The assignment of packets at an interface to a pair of queue and threshold based on their CoS value and traffic direction. | |
| QOS csqIfCosToQueueQueueNumber | 1.3.6.1.4.1.9.9.580.1.4.2.1.3 | QosQueueNumber | read-write | The queue number where packet whose CoS value denoted by csqIfCosToQueueCos will be assigned to. |
| csqIfCosToQueueTable | 1.3.6.1.4.1.9.9.580.1.4.2 | not-accessible | This table provides the information for and configuration of assigning packets to queues and thresholds based on their CoS value. | |
| QOS csqIfCosToQueueThresholdNumber | 1.3.6.1.4.1.9.9.580.1.4.2.1.4 | QosThresholdNumber | read-write | The threshold number where packet whose CoS value denoted by csqIfCosToQueueCos will be assigned to. |
| QOS csqIfDefaultCos | 1.3.6.1.4.1.9.9.580.1.4.1.1.1 | QosLayer2Cos | read-write | This object specifies the default CoS value configured at this physical interface. This default value will be assigned to packet which does not have a CoS value in its layer-2 header when the packet arrives at this interface or if the value of csqIfTrustState object for this physical interface is 'untrusted'. |
| IFD csqIfDropConfigDirection | 1.3.6.1.4.1.9.9.580.1.4.4.1.1 | IfDirection | not-accessible | Indicates the queue direction. |
| INT csqIfDropConfigDropAlgorithm | 1.3.6.1.4.1.9.9.580.1.4.4.1.4 | INTEGER | read-write | Specifies the drop algorithm running at this queue and threshold. 'tailDrop' indicates that this queue and threshold drops packet using tail-drop algorithm. This value is configurable only if 'tailDrop' bit in the value of qosIfCapabilities object for the same ifIndex and traffic direction is set. 'wred' indicates that WRED algorithm is used. This value is configurable only if 'wred' bit in the value of qosIfCapabilities object for the same ifIndex and traffic direction is set. |
| PER csqIfDropConfigDropThreshold | 1.3.6.1.4.1.9.9.580.1.4.4.1.5 | Percent | read-write | This object specifies the drop threshold parameter for a pair of queue and threshold of an interface when the drop algorithm is tail drop. Once the packets in the buffer is more than the value of this object, the incoming packets of the buffer are dropped. The value is a percentage of the full buffer. This object is configurable only if 'tailDrop' bit in the value of qosIfCapabilities for the same ifIndex and traffic direction is set. If value of csqIfDropConfigAlgorithm is not 'tailDrop', this object value has no effect. If value of csqIfDropConfigQueueBuffer is not 'percent', this object value has no effect. |
| csqIfDropConfigEntry | 1.3.6.1.4.1.9.9.580.1.4.4.1 | not-accessible | For each threshold of a queue, there are parameters to set on the threshold. This entry contains the parameters. | |
| PER csqIfDropConfigMaxWredThreshold | 1.3.6.1.4.1.9.9.580.1.4.4.1.7 | Percent | read-write | This object specifies the max WRED threshold parameter of a threshold number for the specific interface when WRED drop algorithm is used. This object is configurable only if 'wred' bit in the value of qosIfCapabilities object for the same ifIndex and traffic direction is set. If value of csqIfDropConfigAlgorithm is not 'wred', this object value has no effect. |
| PER csqIfDropConfigMinWredThreshold | 1.3.6.1.4.1.9.9.580.1.4.4.1.6 | Percent | read-write | This object specifies the min WRED threshold parameter of a threshold number for the specific interface when WRED drop algorithm is used. WRED (Weighted Random Early Detect) is a mechanism which drops packets fairly during congestion so that adaptive applications can react to congestion. This object specifies a percentage of the buffer size. This object is configurable only if 'wred' bit in the value of qosIfCapabilities object for the same ifIndex and traffic direction is set. If value of csqIfDropConfigAlgorithm is not 'wred', this object value has no effect. |
| INT csqIfDropConfigQueueBuffer | 1.3.6.1.4.1.9.9.580.1.4.4.1.8 | INTEGER | read-write | This object specifies how the queue buffer behaves when the drop algorithm is tail drop. 'shared' indicates that the queue buffer is shared among all queues at the interface. 'dedicated' indicates that each queue will be assigned a dedicated portion of the queue buffer. 'percent' indicates that a percentage of the queue buffer can be configured for each queue. The percentage value can be configured via csqIfDropConfigDropThreshold object. This object is configurable only if 'tailDrop' bit in the value of qosIfCapabilities for the same ifIndex and traffic direction is set. If value of csqIfDropConfigAlgorithm is not 'tailDrop', this object value has no effect. |
| QOS csqIfDropConfigQueueIndex | 1.3.6.1.4.1.9.9.580.1.4.4.1.2 | QosQueueNumber | not-accessible | Indicates queue number. |
| csqIfDropConfigTable | 1.3.6.1.4.1.9.9.580.1.4.4 | not-accessible | This table maintains threshold parameters for the specified queue number and threshold number of an interface. | |
| QOS csqIfDropConfigThresholdIndex | 1.3.6.1.4.1.9.9.580.1.4.4.1.3 | QosThresholdNumber | not-accessible | Indicates threshold number. |
| QOS csqIfDscpMutationMap | 1.3.6.1.4.1.9.9.580.1.3.10.1.2 | QosMutationMapNameOrEmpty | read-create | This object specifies the name of DSCP mutation map applied at this interface. If DSCP mutation is not performed at the interface, then the value of this object is the zero-length string; otherwise, the value of this object must be the name of a row in the csqDscpMutationTable. If a row in the csqDscpMutationTable is deleted, all instances of this object which referenced the deleted row get changed to the zero-length string. |
| IFD csqIfDscpToQueueDirection | 1.3.6.1.4.1.9.9.580.1.4.3.1.1 | IfDirection | not-accessible | The traffic direction of a packet. |
| DSC csqIfDscpToQueueDscp | 1.3.6.1.4.1.9.9.580.1.4.3.1.2 | Dscp | not-accessible | The DSCP value of the packet which the queue and threshold assignment is based on. |
| csqIfDscpToQueueEntry | 1.3.6.1.4.1.9.9.580.1.4.3.1 | not-accessible | The assignment of packets at an interface to a pair of queue and threshold based on their DSCP value and packets traffic direction. | |
| QOS csqIfDscpToQueueQueueNumber | 1.3.6.1.4.1.9.9.580.1.4.3.1.3 | QosQueueNumber | read-write | The queue number where packet whose DSCP value denoted by csqIfDscpToQueueDscp will be assigned to. |
| csqIfDscpToQueueTable | 1.3.6.1.4.1.9.9.580.1.4.3 | not-accessible | This table provides the information for and configuration of assigning packets to queues and thresholds based on their DSCP value and traffic direction. | |
| QOS csqIfDscpToQueueThresholdNumber | 1.3.6.1.4.1.9.9.580.1.4.3.1.4 | QosThresholdNumber | read-write | The threshold number where packet whose DSCP value denoted by csqIfDscpToQueueDscp will be assigned to. |
| STR csqIfEgressPolicyMap | 1.3.6.1.4.1.9.9.580.1.4.1.1.6 | SnmpAdminString | read-write | Specifies the name of an existing policy-map attached to this interface in egress direction. If there is no such policy-map attached, the value of this object is zero-length string. |
| T/F csqIfEgressQueueingEnable | 1.3.6.1.4.1.9.9.580.1.4.1.1.8 | TruthValue | read-only | This object indicates if egress queueing is enabled at this interface. 'true' indicates egress queueing is enabled. 'false' indicates egress queueing is disabled. |
| QOS csqIfExpMutationMap | 1.3.6.1.4.1.9.9.580.1.3.10.1.3 | QosMutationMapNameOrEmpty | read-create | This object specifies the name of EXP mutation map applied at this interface. If EXP mutation is not performed at the interface, then the value of this object is the zero-length string; otherwise, the value of this object must be the name of a row in the csqExpMutationTable. If a row in the csqExpMutationTable is deleted, all instances of this object which referenced the deleted row get changed to the zero-length string. |
| STR csqIfIngressPolicyMap | 1.3.6.1.4.1.9.9.580.1.4.1.1.5 | SnmpAdminString | read-write | Specifies the name of an existing policy-map attached to this interface in ingress direction. If there is no such policy-map attached, the value of this object is zero-length string. |
| T/F csqIfIngressQueueingEnable | 1.3.6.1.4.1.9.9.580.1.4.1.1.7 | TruthValue | read-only | This object indicates if ingress queueing is enabled at this interface. 'true' indicates ingress queueing is enabled. 'false' indicates ingress queueing is disabled. |
| csqIfModeConfigEntry | 1.3.6.1.4.1.9.9.580.1.4.6.1 | not-accessible | An entry containing QoS mode information of layer-2 interface. | |
| csqIfModeConfigTable | 1.3.6.1.4.1.9.9.580.1.4.6 | not-accessible | A table used to configure the QoS mode for layer-2 interface. | |
| csqIfMutationConfigEntry | 1.3.6.1.4.1.9.9.580.1.3.10.1 | not-accessible | A row instance contains the name of CoS, DSCP and EXP mutation map and RowStatus object. | |
| csqIfMutationConfigTable | 1.3.6.1.4.1.9.9.580.1.3.10 | not-accessible | A table containing the mutation configuration for mutation capable interface in the device. If a mutation capable interface does not have a row in this table, there is no mutation performed at such interface. | |
| ROW csqIfMutationRowStatus | 1.3.6.1.4.1.9.9.580.1.3.10.1.4 | RowStatus | read-create | This object is used to manage the creation, and deletion of rows in the table. |
| csqIfPriGrpInBufUsageEntry | 1.3.6.1.4.1.9.9.580.1.5.6.1 | not-accessible | An entry indicates the per interface per priority group buffer utilization on ingress direction. The unit of the value of each object is cell. A cell represents the number of bytes, which is indicated by scalar object csqServicePoolCellSize. | |
| U32 csqIfPriGrpInBufUsageGlobalHeadroomCount | 1.3.6.1.4.1.9.9.580.1.5.6.1.5 | Unsigned32 | read-only | This object indicates current usage of cells out of the global headroom buffer. Global headroom buffer is reserved and shared across all interfaces. |
| U32 csqIfPriGrpInBufUsageGrpNo | 1.3.6.1.4.1.9.9.580.1.5.6.1.1 | Unsigned32 | not-accessible | This object indicates a specific priority group on the interface. |
| U32 csqIfPriGrpInBufUsageHeadroomCount | 1.3.6.1.4.1.9.9.580.1.5.6.1.4 | Unsigned32 | read-only | This object indicates current usage of cells out of the reserved headroom buffer. Headroom buffer is reserved to account for PFC control frame round trip delays. |
| U32 csqIfPriGrpInBufUsageHeadroomPeekCount | 1.3.6.1.4.1.9.9.580.1.5.6.1.7 | Unsigned32 | read-only | This object indicates peak usage of cells out of the reserved headroom buffer. |
| U32 csqIfPriGrpInBufUsageMinCount | 1.3.6.1.4.1.9.9.580.1.5.6.1.2 | Unsigned32 | read-only | This object indicates the current usage of cells used out of the minimum reserved buffer. |
| U32 csqIfPriGrpInBufUsageSharedCount | 1.3.6.1.4.1.9.9.580.1.5.6.1.3 | Unsigned32 | read-only | This object indicates the current usage of cells used out of the shared pool. |
| U32 csqIfPriGrpInBufUsageSharedPeekCount | 1.3.6.1.4.1.9.9.580.1.5.6.1.6 | Unsigned32 | read-only | This object indicates peak usage of cells out of the shared pool. |
| csqIfPriGrpInBufUsageTable | 1.3.6.1.4.1.9.9.580.1.5.6 | not-accessible | A table contains the utilization of the buffer allocated for a specific priority group on the ingress of the QoS manageable interfaces. | |
| U32 csqIfQosGroupInfoBandwidth | 1.3.6.1.4.1.9.9.580.1.4.8.1.10 | Unsigned32 | read-only | This object indicates the bandwidth. Value 0 indicates it's not applicable for this direction. |
| INT csqIfQosGroupInfoBandwidthUnits | 1.3.6.1.4.1.9.9.580.1.4.8.1.11 | INTEGER | read-only | This object indicates the unit of csqIfQosGroupInfoBandwidth. |
| IFD csqIfQosGroupInfoDirection | 1.3.6.1.4.1.9.9.580.1.4.8.1.1 | IfDirection | not-accessible | This object indicates traffic direction. |
| INT csqIfQosGroupInfoDropType | 1.3.6.1.4.1.9.9.580.1.4.8.1.6 | INTEGER | read-only | This object indicates the drop type. |
| csqIfQosGroupInfoEntry | 1.3.6.1.4.1.9.9.580.1.4.8.1 | not-accessible | A row instance contains Qos group information, which are per interface (ifIndex), per traffic direction, per QoS group. | |
| U32 csqIfQosGroupInfoGroupNumber | 1.3.6.1.4.1.9.9.580.1.4.8.1.2 | Unsigned32 | not-accessible | This object indicates a specific QoS group. |
| U32 csqIfQosGroupInfoHwMTU | 1.3.6.1.4.1.9.9.580.1.4.8.1.4 | Unsigned32 | read-only | This object indicates the hardware MTU. Value 0 indicates it's not applicable for this direction. |
| U32 csqIfQosGroupInfoMTU | 1.3.6.1.4.1.9.9.580.1.4.8.1.5 | Unsigned32 | read-only | This object indicates the MTU applied via QoS policy. Value 0 indicates it's not applicable for this direction. |
| U32 csqIfQosGroupInfoPauseThresh | 1.3.6.1.4.1.9.9.580.1.4.8.1.8 | Unsigned32 | read-only | This object indicates the buffer limit (In Bytes) at which the port pauses the peer. Value 0 indicates it's not applicable for this direction. |
| U32 csqIfQosGroupInfoQueueSize | 1.3.6.1.4.1.9.9.580.1.4.8.1.3 | Unsigned32 | read-only | This object indicates the ingress queue size. Value 0 indicates it's not applicable for this direction. |
| U32 csqIfQosGroupInfoResumeThresh | 1.3.6.1.4.1.9.9.580.1.4.8.1.7 | Unsigned32 | read-only | This object indicates the buffer limit (In Bytes) at which the port resumes the peer. Value 0 indicates it's not applicable for this direction. |
| INT csqIfQosGroupInfoScheduling | 1.3.6.1.4.1.9.9.580.1.4.8.1.9 | INTEGER | read-only | This object indicates the scheduling type applied via QoS policy. |
| U32 csqIfQosGroupInfoShapeMaxThresh | 1.3.6.1.4.1.9.9.580.1.4.8.1.13 | Unsigned32 | read-only | This object indicates the shape maximum threshold. Value 0 indicates it's not applicable for this direction. |
| U32 csqIfQosGroupInfoShapeMinThresh | 1.3.6.1.4.1.9.9.580.1.4.8.1.12 | Unsigned32 | read-only | This object indicates the shape minimum threshold. Value 0 indicates it's not applicable for this direction. |
| INT csqIfQosGroupInfoShapeUnits | 1.3.6.1.4.1.9.9.580.1.4.8.1.14 | INTEGER | read-only | This object indicates the unit of csqIfQosGroupInfoShapeMinThresh and csqIfQosGroupInfoShapeMaxThresh. |
| csqIfQosGroupInfoTable | 1.3.6.1.4.1.9.9.580.1.4.8 | not-accessible | This table provides QoS group information for QoS manageable interfaces in the device. | |
| IFD csqIfQosGroupStatsDirection | 1.3.6.1.4.1.9.9.580.1.5.5.1.1 | IfDirection | not-accessible | This object indicates traffic direction. |
| csqIfQosGroupStatsEntry | 1.3.6.1.4.1.9.9.580.1.5.5.1 | not-accessible | An entry contains a specific statistics, which are per interface (ifIndex), per traffic direction, per QoS group. | |
| U32 csqIfQosGroupStatsGroupNumber | 1.3.6.1.4.1.9.9.580.1.5.5.1.2 | Unsigned32 | not-accessible | This object indicates a specific QoS group on the interface. |
| csqIfQosGroupStatsTable | 1.3.6.1.4.1.9.9.580.1.5.5 | not-accessible | A table containing QoS statistics counters on QoS manageable interfaces. | |
| QOS csqIfQosGroupStatsType | 1.3.6.1.4.1.9.9.580.1.5.5.1.3 | QosStatsType | not-accessible | This object indicates a specific statistics counter type. |
| C64 csqIfQosGroupStatsValue | 1.3.6.1.4.1.9.9.580.1.5.5.1.4 | Counter64 | read-only | This object indicates the value of the specific statistics counter. |
| STR csqIfQueueClassMapName | 1.3.6.1.4.1.9.9.580.1.4.5.1.6 | SnmpAdminString | read-write | Specifies the name of an existing class-map attached at this interface for a queue in the specified direction. If there is no such class-map attached, the value of this object is zero-length string. |
| IFD csqIfQueueDirection | 1.3.6.1.4.1.9.9.580.1.4.5.1.1 | IfDirection | not-accessible | Indicates the queue direction. |
| csqIfQueueEntry | 1.3.6.1.4.1.9.9.580.1.4.5.1 | not-accessible | A set of WRR weight and queue size allocation weight for ingress or egress of a specific queue. | |
| INT csqIfQueueingTrustState | 1.3.6.1.4.1.9.9.580.1.4.1.1.9 | INTEGER | read-only | This object indicates the queueing trust state of an interface. If the object is untrusted(1), then the DSCP assigned to the packet is the layer2 CoS value denoted by csqIfDefaultCos object mapped to a DSCP by the CoS-to-DSCP mapping defined in object csqCosToDscpDscp. If this object is trustCoS(2), then the DSCP assigned to the packet is the layer2 CoS of the packet mapped to a DSCP by the CoS-to-DSCP mapping defined in object csqCosToDscpDscp. When this object is trustIpPrec(3), a DSCP is assigned to an IP packet according to the IP-Precedence-to-DSCP mapping defined by the values contained in csqIpPrecToDscpTable. For non-IP packets, trustIpPrec(3) has identical behavior as trustCoS(2). When this object is trustDscp(4), the DSCP contained in an IP packet is trusted as being the correct value to assign to it. For non-IP packets, trustDscp(4) has identical behavior as trustCoS(2). |
| BIT csqIfQueueModeCpb | 1.3.6.1.4.1.9.9.580.1.4.1.1.3 | Bits | read-only | This object indicates the queue mode capability at this interface. 'cos' indicates that the interface is capable of queueing a packet based on the CoS value of the packet. 'dscp' indicates that the interface is capable of queueing a packet based on the DSCP value of the packet. |
| QOS csqIfQueueNumber | 1.3.6.1.4.1.9.9.580.1.4.5.1.2 | QosQueueNumber | not-accessible | Indicates queue number. |
| INT csqIfQueueScheduling | 1.3.6.1.4.1.9.9.580.1.4.5.1.7 | INTEGER | read-write | Specifies the queue scheduling method. 'wrr' indicates that the queue scheduling method is Weight Round Robin. 'srr' indicates that the queue scheduling method is Shaped Round Robin. |
| U32 csqIfQueueSizeWeight | 1.3.6.1.4.1.9.9.580.1.4.5.1.4 | Unsigned32 | read-write | Specifies the queue size weight. |
| U32 csqIfQueueSrrWeight | 1.3.6.1.4.1.9.9.580.1.4.5.1.8 | Unsigned32 | read-write | Specifies the SRR weight. This object is configurable only if the value of csqIfQueueScheduling is 'srr'. When the value of csqIfQueueScheduling is not 'srr', the value of this object has no effect. |
| INT csqIfQueueStatsGranularity | 1.3.6.1.4.1.9.9.580.1.4.5.1.5 | INTEGER | read-only | Indicates whether QoS statistics is maintained per queue or per queue per threshold. 'perQueue' indicates that QoS statistics is maintained per queue. 'perQueueThresh' indicates that QoS statistics is maintained per queue per threshold. |
| csqIfQueueTable | 1.3.6.1.4.1.9.9.580.1.4.5 | not-accessible | A table containing configuration parameter for each queue on a QOS managable interface. | |
| U32 csqIfQueueWrrWeight | 1.3.6.1.4.1.9.9.580.1.4.5.1.3 | Unsigned32 | read-write | Specifies the WRR weight. This object is configurable only if the value of csqIfQueueScheduling is 'wrr'. When the value of csqIfQueueScheduling is not 'wrr', the value of this object has no effect. |
| IFD csqIfStatsDirection | 1.3.6.1.4.1.9.9.580.1.5.1.1.1 | IfDirection | not-accessible | Indicates traffic direction of an interface. |
| C64 csqIfStatsDropPktsEx | 1.3.6.1.4.1.9.9.580.1.5.1.1.4 | Counter64 | read-only | The number of packets that have been received then dropped from the interface because they exceeded the threshold value configured at this queue and threshold of this interface. |
| csqIfStatsEntry | 1.3.6.1.4.1.9.9.580.1.5.1.1 | not-accessible | An entry contains statistics, such as a drop packet counter, which are per interface (ifIndex), per direction, per queue and per threshold. | |
| csqIfStatsExtEntry | 1.3.6.1.4.1.9.9.580.1.5.4.1 | not-accessible | Each entry contains statistics, such as a drop BPDU packet counter, which are per interface (ifIndex), per direction. | |
| csqIfStatsExtTable | 1.3.6.1.4.1.9.9.580.1.5.4 | not-accessible | A table containing QoS statistics counters per QoS manageable interface. | |
| QOS csqIfStatsQueueNumber | 1.3.6.1.4.1.9.9.580.1.5.1.1.2 | QosQueueNumber | not-accessible | Indicates the queue number of the interface for which statistics are collected. For example : if the interface has a queue type of oneP2Q2t, this index value can be 1, 2, 3. |
| csqIfStatsTable | 1.3.6.1.4.1.9.9.580.1.5.1 | not-accessible | A table containing QoS statistics counters per QoS manageable interface. | |
| QOS csqIfStatsThresholdNumber | 1.3.6.1.4.1.9.9.580.1.5.1.1.3 | QosThresholdNumber | not-accessible | Indicates the threshold number of a queue on the interface for which statistics are collected. For example : if the interface has a queue type of oneP2Q2t, this index value can be 1, 2. If the value of the corresponding csqIfQueueStatsGranularity for the queue that this csqIfStatsThresholdNumber belongs to is 'perQueue', this csqIfStatsThresholdNumber index value is always 1. |
| INT csqIfTrustState | 1.3.6.1.4.1.9.9.580.1.4.1.1.2 | INTEGER | read-write | This object is used to set the trust state of an interface. (whether the packets arriving at an interface are trusted to carry the correct data for classification.) If the object is untrusted(1), then the DSCP assigned to the packet is the layer2 CoS value denoted by csqIfDefaultCos object mapped to a DSCP by the CoS-to-DSCP mapping defined in object csqCosToDscpDscp. If this object is trustCoS(2), then the DSCP assigned to the packet is the layer2 CoS of the packet mapped to a DSCP by the CoS-to-DSCP mapping defined in object csqCosToDscpDscp. When this object is trustIpPrec(3), a DSCP is assigned to an IP packet according to the IP-Precedence-to-DSCP mapping defined by the values contained in csqIpPrecToDscpTable. For non-IP packets, trustIpPrec(3) has identical behavior as trustCoS(2). When this object is trustDscp(4), the DSCP contained in an IP packet is trusted as being the correct value to assign to it. For non-IP packets, trustDscp(4) has identical behavior as trustCoS(2). |
| T/F csqIfVlanBasedQosModeEnable | 1.3.6.1.4.1.9.9.580.1.4.6.1.1 | TruthValue | read-write | Specifies if VLAN-based mode is enabled or disabled at the specified interface. If 'true', policy map that is attached to this interface has no effect, and QoS is driven by the policy map that is attached to the corresponding VLAN interface that this interface belongs to. Otherwise, the value of this object is 'false'. |
| csqInterface | 1.3.6.1.4.1.9.9.580.1.4 | |||
| DSC csqIpPrecToDscpDscp | 1.3.6.1.4.1.9.9.580.1.2.2.1.2 | Dscp | read-write | The DSCP value which the IP Precedence value maps to. |
| csqIpPrecToDscpEntry | 1.3.6.1.4.1.9.9.580.1.2.2.1 | not-accessible | Each row contains the mapping from an IP Precedence value to a DSCP value. | |
| QOS csqIpPrecToDscpIpPrec | 1.3.6.1.4.1.9.9.580.1.2.2.1.1 | QosIpPrecedence | not-accessible | The IP Precedence value being mapped to the DSCP value. |
| csqIpPrecToDscpTable | 1.3.6.1.4.1.9.9.580.1.2.2 | not-accessible | This table contains the mapping of IP Precedence to DSCP. This mapping table consist of eight IpPrecedence values (0 through 7) and their corresponding DSCP values. The mapping given by this table is used for all packets received on an interface if and only if that interface has a trust state, as given by the value of csqIfTrustState for the interface, of 'trustIpPrec'. | |
| csqMappings | 1.3.6.1.4.1.9.9.580.1.2 | |||
| T/F csqMarkingStatisticsEnable | 1.3.6.1.4.1.9.9.580.1.1.4 | TruthValue | read-write | This object specifies whether statistics collection for policy that sets a trust state is enabled at a device-level of granularity, i.e., 'true' = enabled and 'false' = disabled. If no other objects specify whether statistics collection for policy that sets a trust state is enabled at any different level of granularity, then this object's value is not subject to any modifiers. However, some devices might support other object(s) which specify whether statistics collection for policy that sets a trust state is enabled at different level(s) of granularity. For such devices, the value of this object takes precedence over the values of such other object(s) when the value of this object is 'false'; in contrast, when the value of this object is 'true', the values of such other objects take precedence over the value of this object. if 'true', statistics collection is enabled. if 'false', statistics collection is disabled. |
| U32 csqMaxCosMutationMap | 1.3.6.1.4.1.9.9.580.1.3.1 | Unsigned32 | read-only | The maximum number of CoS mutation map that can be supported in the device. |
| U32 csqMaxDscpMutationMap | 1.3.6.1.4.1.9.9.580.1.3.4 | Unsigned32 | read-only | The maximum number of DSCP mutation map that can be supported in the device. |
| U32 csqMaxExpMutationMap | 1.3.6.1.4.1.9.9.580.1.3.7 | Unsigned32 | read-only | The maximum number of EXP mutation can be supported in the device. |
| csqModule | 1.3.6.1.4.1.9.9.580.1.7 | |||
| C64 csqModuleAggHighExceedInOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.26 | Counter64 | read-only | The total number of ingress octets (policed by aggregate policers) exceeding the high level policing rate. |
| C32 csqModuleAggHighExceedInPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.25 | Counter32 | read-only | The total number of ingress packets (policed by aggregate policers) exceeding the high level policing rate. |
| C64 csqModuleAggHighExceedOutOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.28 | Counter64 | read-only | The total number of egress octets (policed by aggregate policers) exceeding the high level policing rate. |
| C32 csqModuleAggHighExceedOutPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.27 | Counter32 | read-only | The total number of egress packets (policed by aggregate policers) exceeding the high level policing rate. |
| C64 csqModuleAggLowExceedInOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.30 | Counter64 | read-only | The total number of ingress octets (policed by aggregate policers) exceeding the low level policing rate. |
| C32 csqModuleAggLowExceedInPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.29 | Counter32 | read-only | The total number of ingress packets (policed by aggregate policers) exceeding the low level policing rate. |
| C64 csqModuleAggLowExceedOutOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.32 | Counter64 | read-only | The total number of egress octets (policed by aggregate policers) exceeding the low level policing rate. |
| C32 csqModuleAggLowExceedOutPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.31 | Counter32 | read-only | The total number of egress packets (policed by aggregate policers) exceeding the low level policing rate. |
| C64 csqModuleCosChangedIpPackets | 1.3.6.1.4.1.9.9.580.1.5.2.1.3 | Counter64 | read-only | The number of IP packets that have the CoS value changed due to policing. |
| C64 csqModuleCosChangedNonIpPackets | 1.3.6.1.4.1.9.9.580.1.5.2.1.4 | Counter64 | read-only | The number of non IP packets that have the CoS value changed due to policing. |
| C32 csqModuleCosChangedPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.45 | Counter32 | read-only | The number of packets (IP and non-IP) that have the CoS value changed due to policing. |
| C64 csqModuleDropByAggPolicerInOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.18 | Counter64 | read-only | The total number of ingress octets which are dropped by aggregate policer. |
| C32 csqModuleDropByAggPolicerInPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.17 | Counter32 | read-only | The total number of ingress packets which are dropped by aggregate policers. |
| C64 csqModuleDropByAggPolicerOutOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.20 | Counter64 | read-only | The total number of egress octets which are dropped by aggregate policers. |
| C32 csqModuleDropByAggPolicerOutPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.19 | Counter32 | read-only | The total number of egress packets which are dropped by aggregate policers. |
| C64 csqModuleDropByNetflowInOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.34 | Counter64 | read-only | The total number of ingress octets which are dropped by the netflow feature. |
| C32 csqModuleDropByNetflowInPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.33 | Counter32 | read-only | The total number of ingress packets which are dropped by the netflow feature. |
| C64 csqModuleDropByNetflowOutOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.36 | Counter64 | read-only | The total number of egress octets which are dropped by the netflow feature. |
| C32 csqModuleDropByNetflowOutPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.35 | Counter32 | read-only | The total number of egress packets which are dropped by the netflow feature. |
| C64 csqModuleDropByPolicingInOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.3 | Counter64 | read-only | The total number of ingress octets which are dropped due to policing. |
| C64 csqModuleDropByPolicingOutOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.4 | Counter64 | read-only | The total number of egress octets which are dropped due to policing. |
| C64 csqModuleDropByPolicingPackets | 1.3.6.1.4.1.9.9.580.1.5.2.1.1 | Counter64 | read-only | The number of packets that have been dropped due to policing. |
| T/F csqModuleDscpRewriteEnable | 1.3.6.1.4.1.9.9.580.1.7.1.1.1 | TruthValue | read-write | This object specifies whether DSCP rewrite is enabled on a particular module when the value of csqDscpRewriteEnable is set to 'true'. The value of this object has no effect (DSCP rewrite will be disabled on this module) when the value of csqDscpRewriteEnable is set to 'false'. |
| csqModuleDscpRewriteEnableEntry | 1.3.6.1.4.1.9.9.580.1.7.1.1 | not-accessible | An entry contains the configuration of DSCP Rewrite Enable Status for a DSCP Rewrite managable module. such module is of type entPhysicalClass module(9) in ENTITY-MIB. Entries are created by the agent at the system power-up or module insertion. Entries are deleted by the agent upon module removal. | |
| csqModuleDscpRewriteEnableTable | 1.3.6.1.4.1.9.9.580.1.7.1 | not-accessible | The table containing information of DSCP Rewrite Enable for each module. Such module is identified by the entPhysicalIndex in ENTITY-MIB. The value of each entry needs to be viewed in association with the global value, csqDscpRewriteEnable. | |
| C64 csqModuleExpChangedMplsPackets | 1.3.6.1.4.1.9.9.580.1.5.2.1.5 | Counter64 | read-only | The number of MPLS packets have the EXP value change due to policing. |
| C64 csqModuleFwdByAggPolicerInOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.22 | Counter64 | read-only | The total number of ingress octets which are forwarded by aggregate policers. |
| C32 csqModuleFwdByAggPolicerInPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.21 | Counter32 | read-only | The total number of ingress packets which are forwarded by aggregate policers. |
| C64 csqModuleFwdByAggPolicerOutOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.24 | Counter64 | read-only | The total number of egress octets which are forwarded by aggregate policers. |
| C32 csqModuleFwdByAggPolicerOutPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.23 | Counter32 | read-only | The total number of egress packets which are forwarded by aggregate policers. |
| C64 csqModuleFwdByNetflowInOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.38 | Counter64 | read-only | The total number of ingress octets which are forwarded by the netflow feature. |
| C32 csqModuleFwdByNetflowInPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.37 | Counter32 | read-only | The total number of ingress packets which are forwarded by the netflow feature. |
| C64 csqModuleFwdByNetflowOutOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.40 | Counter64 | read-only | The total number of egress octets which are forwarded by the netflow feature. |
| C32 csqModuleFwdByNetflowOutPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.39 | Counter32 | read-only | The total number of egress packets which are forwarded by the netflow feature. |
| C64 csqModuleFwdByPolicingInOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.6 | Counter64 | read-only | The total number of policed ingress octets which are forwarded. |
| C32 csqModuleFwdByPolicingInPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.5 | Counter32 | read-only | The total number of policed ingress packets which are forwarded. |
| C64 csqModuleFwdByPolicingOutOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.8 | Counter64 | read-only | The total number of policed egress octets which are forwarded. |
| C32 csqModuleFwdByPolicingOutPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.7 | Counter32 | read-only | The total number of policed egress packets which are forwarded. |
| C64 csqModuleHighExceedInOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.10 | Counter64 | read-only | The total number of ingress octets exceeding the high level policing rate. |
| C32 csqModuleHighExceedInPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.9 | Counter32 | read-only | The total number of ingress packets exceeding the high level policing rate. |
| C64 csqModuleHighExceedOutOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.12 | Counter64 | read-only | The total number of egress octets exceeding the high level policing rate. |
| C32 csqModuleHighExceedOutPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.11 | Counter32 | read-only | The total number of egress packets exceeding the high level policing rate. |
| C64 csqModuleLowExceedInOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.14 | Counter64 | read-only | The total number of ingress octets exceeding the low level policing rate. |
| C32 csqModuleLowExceedInPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.13 | Counter32 | read-only | The total number of ingress packets exceeding the low level policing rate. |
| C64 csqModuleLowExceedOutOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.16 | Counter64 | read-only | The total number of egress octets exceeding the low level policing rate. |
| C32 csqModuleLowExceedOutPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.15 | Counter32 | read-only | The total number of egress packets exceeding the low level policing rate. |
| C64 csqModuleNetflowExceedInOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.42 | Counter64 | read-only | The total number of ingress octets exceeding the netflow policing rate. |
| C32 csqModuleNetflowExceedInPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.41 | Counter32 | read-only | The total number of ingress packets exceeding the netflow policing rate. |
| C64 csqModuleNetflowExceedOutOctets | 1.3.6.1.4.1.9.9.580.1.5.3.1.44 | Counter64 | read-only | The total number of egress octets exceeding the netflow policing rate. |
| C32 csqModuleNetflowExceedOutPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.43 | Counter32 | read-only | The total number of egress packets exceeding the netflow policing rate. |
| csqModuleStatsEntry | 1.3.6.1.4.1.9.9.580.1.5.2.1 | not-accessible | An entry contains per-module (entPhysicalIndex) statistics such as the number of dropped packets due to policing, number of IP packets with their ToS and CoS value changed, number of non IP packets with their CoS value changed, and number of MPLS packets with their EXP value changed. | |
| csqModuleStatsExtEntry | 1.3.6.1.4.1.9.9.580.1.5.3.1 | not-accessible | Each entry contains additional per-module (entPhysicalIndex) QoS statistics. | |
| csqModuleStatsExtTable | 1.3.6.1.4.1.9.9.580.1.5.3 | not-accessible | This table describes additional QoS statistics counters per module that is capable of providing this information. Such module is identified by the entPhysicalIndex in ENTITY-MIB. | |
| csqModuleStatsTable | 1.3.6.1.4.1.9.9.580.1.5.2 | not-accessible | A table decribes QoS statistics counters per module that is capable of providing this information. Such module is identified by the entPhysicalIndex in ENTITY-MIB. | |
| C64 csqModuleTosChangedIpPackets | 1.3.6.1.4.1.9.9.580.1.5.2.1.2 | Counter64 | read-only | The number of IP packets that have the ToS value changed due to policing. |
| C32 csqModuleTrafficClassChangedPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.46 | Counter32 | read-only | The number of packets that have the Traffic Class changed due to policing |
| C32 csqModuleTunnelDecapPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.2 | Counter32 | read-only | The total number of tunnel decapsulated packets. |
| C32 csqModuleTunnelEncapPackets | 1.3.6.1.4.1.9.9.580.1.5.3.1.1 | Counter32 | read-only | The total number of tunnel encapsulated packets. |
| csqMutations | 1.3.6.1.4.1.9.9.580.1.3 | |||
| T/F csqPoliceRedirectedTrafficEnable | 1.3.6.1.4.1.9.9.580.1.1.2 | TruthValue | read-write | This object specifies whether ACL-redirected traffic policing is enabled at a device-level of granularity, i.e., 'true' = enabled and 'false' = disabled. If no other objects specify whether ACL-redirected traffic is enabled at any different level of granularity, then this object's value is not subject to any modifiers. However, some devices might support other object(s) which specify whether ACL-redirected traffic policing is enabled at different level(s) of granularity. For such devices, the value of this object takes precedence over the values of such other object(s) when the value of this object is 'false'; in contrast, when the value of this object is 'true', the values of such other objects take precedence over the value of this object. if 'true', ACL-redirected traffic is subject to policing. if 'false', ACL-redirected traffic is not policed. |
| U32 csqPolicerTotal | 1.3.6.1.4.1.9.9.580.1.6.1.1.3 | Unsigned32 | read-only | The total number of policers. |
| QOS csqPolicerType | 1.3.6.1.4.1.9.9.580.1.6.1.1.1 | QosPolicerType | not-accessible | This object indicates the policer type. |
| csqPolicerUsage | 1.3.6.1.4.1.9.9.580.1.6 | |||
| csqPolicerUsageEntry | 1.3.6.1.4.1.9.9.580.1.6.1.1 | not-accessible | Each row contains the policer usage information for every module, denoted by its entPhysicalIndex, which is capable of providing this information. | |
| csqPolicerUsageTable | 1.3.6.1.4.1.9.9.580.1.6.1 | not-accessible | This table contains the usage of policers in the device. | |
| U32 csqPolicerUsed | 1.3.6.1.4.1.9.9.580.1.6.1.1.2 | Unsigned32 | read-only | The number of policers that are currently used. |
| T/F csqPortQueueingModeEnable | 1.3.6.1.4.1.9.9.580.1.1.3 | TruthValue | read-write | This object specifies whether port-queueing mode is enabled at a device-level of granularity, i.e., 'true' = enabled and 'false' = disabled. If no other objects specify whether port-queueing mode is enabled at any different level of granularity, then this object's value is not subject to any modifiers. However, some devices might support other object(s) which specify whether port-queueing mode is enabled at different level(s) of granularity. For such devices, the value of this object takes precedence over the values of such other object(s) when the value of this object is 'false'; in contrast, when the value of this object is 'true', the values of such other objects take precedence over the value of this object. if 'true', port-queueing mode is enabled. In port-queueing mode, marking and policing is disabled. All queueing on receiving and transmitting is based on QoS tag in the incoming packet. For 802.1Q or ISL-encapsulated packets, queueing is based on the CoS value. Otherwise, queueing is based on the default interface CoS value denoted by csqIfDefaultCos object. if 'false', port-queueing mode is disabled. |
| U32 csqServicePoolCellSize | 1.3.6.1.4.1.9.9.580.1.1.6 | Unsigned32 | read-only | This object indicates the number of bytes for a service pool cell. |
| csqSharedPoolUsageEntry | 1.3.6.1.4.1.9.9.580.1.5.7.1 | not-accessible | An entry indicates the utilization of an shared service pool on a particular physical device, which is identified by a specific module(indicated by entPhysicalIndex in ENTITY-MIB) and instance (indicated by csqSharedPoolUsageInstNo). The unit of the value of the objects is cell. A cell represents the number of bytes, which is indicated by scalar object csqServicePoolCellSize. | |
| U32 csqSharedPoolUsageInstNo | 1.3.6.1.4.1.9.9.580.1.5.7.1.1 | Unsigned32 | not-accessible | This object indicates an arbitrary number which uniquely identifies the instance number of a specific internal device. |
| STR csqSharedPoolUsageNameTx | 1.3.6.1.4.1.9.9.580.1.5.7.1.11 | SnmpAdminString | read-only | Indicates the name of output shared pool. |
| U32 csqSharedPoolUsagePeak | 1.3.6.1.4.1.9.9.580.1.5.7.1.5 | Unsigned32 | read-only | This object indicates the peak used cells in a shared pool. |
| U32 csqSharedPoolUsagePeakTx | 1.3.6.1.4.1.9.9.580.1.5.7.1.9 | Unsigned32 | read-only | This object indicates the peak used cells in a output shared pool. |
| U32 csqSharedPoolUsagePoolNo | 1.3.6.1.4.1.9.9.580.1.5.7.1.2 | Unsigned32 | not-accessible | This object indicates the service pool number. |
| U32 csqSharedPoolUsageRemain | 1.3.6.1.4.1.9.9.580.1.5.7.1.4 | Unsigned32 | read-only | This object indicates the remaining cells in a shared pool. |
| U32 csqSharedPoolUsageRemainTx | 1.3.6.1.4.1.9.9.580.1.5.7.1.8 | Unsigned32 | read-only | This object indicates the remaining cells in a output shared pool. |
| csqSharedPoolUsageTable | 1.3.6.1.4.1.9.9.580.1.5.7 | not-accessible | A table contains the utilization of the shared service pool in the system. | |
| U32 csqSharedPoolUsageTotal | 1.3.6.1.4.1.9.9.580.1.5.7.1.6 | Unsigned32 | read-only | This object indicates the total cells in a shared pool. |
| U32 csqSharedPoolUsageTotalTx | 1.3.6.1.4.1.9.9.580.1.5.7.1.10 | Unsigned32 | read-only | This object indicates the total cells in a output shared pool. |
| U32 csqSharedPoolUsageUsed | 1.3.6.1.4.1.9.9.580.1.5.7.1.3 | Unsigned32 | read-only | This object indicates the number of used cells in a shared pool. |
| U32 csqSharedPoolUsageUsedTx | 1.3.6.1.4.1.9.9.580.1.5.7.1.7 | Unsigned32 | read-only | This object indicates the number of used cells in a output shared pool. |
| csqStatistics | 1.3.6.1.4.1.9.9.580.1.5 | |||
| T/F csqTenGOnlyMode | 1.3.6.1.4.1.9.9.580.1.1.5 | TruthValue | read-write | This object specifies whether only 10-Gigabit Ethernet uplink interfaces are used exclusively. 'true' indicates that only the 10-Gigabit Ethernet uplink interfaces are used. The other uplink interfaces which are not of 10-Gigabit capacity will be in administratively down state. 'false' indicates otherwise. |
RFC description
Manages QoS features and traffic classification on Cisco Layer 2/3 switching devices.
Start monitoring Cisco Catalyst Layer 2/3 switches (QoS) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.