| OID symbolic | OID numeric | Type | Access | Description |
|---|
| ciscoCommonRolesExtMIB | 1.3.6.1.4.1.9.9.651 | | | A MIB Module for managing the roles that are common
between access methods like Command Line Interface (CLI),
SNMP and XML interface. This MIB is an extension to the
CISCO-COMMON-ROLES-MIB, which is for managing Common
Roles on a device with fixed feature.
Terminology:
Commands are the basic operations that can be performed
on a device. For example 'show aaa *', 'clear aaa *',
'config t; ip arp *'.
Commands can be organized into groups called
Features. Features can be organized into groups called
Feature Groups.
The constituents of a Feature (i.e. Commands) and the
constituents of a Feature Group (i.e. Features) are
collectively referred to as Feature Elements.
This MIB extends the CISCO-COMMON-ROLES-MIB by adding
the following.
Features can be organized into groups called feature groups.
Access privileges can be assigned to feature group(s)
associated with a Role.
The five access privileges (clear, config, debug, show &
exec) are replaced by two access privileges ('read' and
'readWrite'). These two privileges have no relation to the
replaced five privileges.
The types of objects to which access can be restricted
is extended to include VLANs and Interfaces.
A device implementing this MIB need not implement
CISCO-COMMON-ROLES-MIB. |
| ciscoCommonRolesExtNotifications | 1.3.6.1.4.1.9.9.651.0 | | | |
| ciscoCommonRolesExtMIBObjects | 1.3.6.1.4.1.9.9.651.1 | | | |
| ccreInfo | 1.3.6.1.4.1.9.9.651.1.1 | | | |
| ccreFeatureElementTable | 1.3.6.1.4.1.9.9.651.1.1.1 | | not-accessible | This table lists all the features and feature groups
configured on a device.
For each feature it lists all the command(s) contained
in the feature.
For each feature groups it lists all the features
contained in the group.
A feature element is either a feature or a feature
group.
A device may have some predefined features which may
not be editable by a user. In addition, a device may
allow a user to define new feature group.
A device implementing this MIB need not implement the
objects that form a conceptual row in the
'commonRolesFeatureTable' table defined in the
CISCO-COMMON-ROLES MIB.
The entries in this table are persistent across device
reboots. |
| ccreFeatureElementEntry | 1.3.6.1.4.1.9.9.651.1.1.1.1 | | not-accessible | An entry (conceptual row) in the ccreFeatureElementTable.
Each row in this table represents an element (command
or a feature) contained in a feature or a feature group.
For example a 'radius' feature that contains three
commands - 'radius-server', 'radius-cfs' and
'aaa group server radius', this table
will have three entries, one each for the three
commands.
ccreFeatureName ccreFeatureIndex ccreFeatureElementName
'radius' 1 'radius-server'
'radius' 2 'radius-cfs'
'radius' 3 'aaa group server radius'
'arp' 1 'show arp'
'arp' 2 'clear ip arp' |
| STR ccreFeatureName | 1.3.6.1.4.1.9.9.651.1.1.1.1.1 | SnmpAdminString | not-accessible | Identifies the feature or the feature group for which
this entry represents an element.
This object is the same as the commonRoleFeatureName. |
| U32 ccreFeatureElementIndex | 1.3.6.1.4.1.9.9.651.1.1.1.1.2 | Unsigned32 | not-accessible | An index value for this element which uniquely
distinguishes it from all other elements of same
feature. |
| STR ccreFeatureElementName | 1.3.6.1.4.1.9.9.651.1.1.1.1.3 | SnmpAdminString | read-create | Name of the feature element represented by this row. |
| INT ccreFeatureElementType | 1.3.6.1.4.1.9.9.651.1.1.1.1.4 | INTEGER | read-create | An indication of the type of element represented by
this row.
When this field has the value 'command', this row
represents a command name.
When this field has the value 'feature', this row
represents a feature name.
This field must have the value 'none' when a
feature could not otherwise be represented in this
table because the feature does not yet have any
elements defined for it. When features are added to
an empty feature-group, the row with element type
'none' is still maintained in this table. Deleting this
row (with type as 'none') will delete the feature group
and all other rows representing relationship between
this feature group and its members.
A feature should have at least one element, whereas a
feature-group may have zero or more entries.
All entries in this table are persistent across device
reboots |
| ROW ccreFeatureRowStatus | 1.3.6.1.4.1.9.9.651.1.1.1.1.5 | RowStatus | read-create | Status of this row. |
| ccreRoleConfig | 1.3.6.1.4.1.9.9.651.1.2 | | | |
| ccreRoleTable | 1.3.6.1.4.1.9.9.651.1.2.2 | | not-accessible | This table lists all the common roles configured on this
device. Common roles are the user roles which are common
across SNMP and CLI.
A device implementing this MIB need not implement the
objects that form a conceptual row in the
'commonRoleTable' defined in the CISCO-COMMON-ROLES MIB.
This table and the 'commonRoleTable' table both have
one entry per Role defined on the device. However unlike
the 'commonRoleTable', this table does not contain any
scope restriction information. The scope restriction
information instead is contained in the
'ccreRoleScopeTable' Table.
If a device implements this this table along with
'commonRoleTable' a row existing in
'commonRoleTable' should also exist in this table and
vice versa.
All entries in this table are persistent across device
reboots. |
| ccreRoleEntry | 1.3.6.1.4.1.9.9.651.1.2.2.1 | | not-accessible | An entry (conceptual row) in the ccreRoleTable.
One entry per role defined on the device. |
| STR ccreRoleName | 1.3.6.1.4.1.9.9.651.1.2.2.1.1 | SnmpAdminString | not-accessible | Name of the common role. This is same as
commonRoleName. |
| STR ccreRoleDescription | 1.3.6.1.4.1.9.9.651.1.2.2.1.2 | SnmpAdminString | read-create | Description of the common role. This is same as
commonRoleDescription. |
| CCR ccreRoleResourceAccess | 1.3.6.1.4.1.9.9.651.1.2.2.1.3 | CcreResourceAccess | read-create | Defines the default access to the resources to which
access can be controlled.
vsan(0)
Bit value of 0 indicates that the user has access
to no VSANs. However a user can be selectively
assigned access to VSANs and each such accessible
VSAN will have an entry in the 'ccreRoleScopeTable'.
Bit value of 1 indicates that the user has access
to all VSANs. In this case there are no VSAN entries
in the 'ccreRoleScopeTable'. Setting the bit to 1
results in deletion of all VSAN entries from the
ccreRoleScopeTable, for the role identified by
'ccreRoleName'.
vlan(1)
Bit value of 0 indicates that the user has access
to no VLANs. However a user can be selectively
assigned access to VLANs and each such accessible
VLAN will have an entry in the 'ccreRoleScopeTable'.
Bit value of 1 indicates that the user has access
to all VLANs. In this case there are no VLAN entries
in the 'ccreRoleScopeTable'. Setting the bit to 1
results in deletion of all VLAN entries from the
ccreRoleScopeTable, for the role identified by
'ccreRoleName'.
interface(2)
Bit value of 0 indicates that the user has access
to no Interfaces. However a user can be selectively
assigned access to interfaces and each such accessible
interface will have an entry in the 'ccreRoleScopeTable'.
Bit value of 1 indicates that the user has access
to all interfaces. In this case there are no interface
entries in the 'ccreRoleScopeTable'. Setting the bit to 1
results in deletion of all interface entries from the
ccreRoleScopeTable, for the role identified by
'ccreRoleName'.
For example a role which has access to all VSANs,
all VLANs and no Interface will have this field set
as
- - -
|0|1|1|
- - - |
| ROW ccreRoleRowStatus | 1.3.6.1.4.1.9.9.651.1.2.2.1.4 | RowStatus | read-create | Status of this role. |
| ccreRoleScopeTable | 1.3.6.1.4.1.9.9.651.1.2.3 | | not-accessible | This table lists the resources to which a user belonging
to a role can access.
A role may be restricted from accessing various
resources of a device. This table lists the resources
that a role can access.
If for a role there is no entry in this table, then
restriction, if any, is determined by the
ccrePermitAllPolicies object in the ccreRoleTable.
Each resource (VSAN, VLAN or Interface) to which a role
has access to, has a separate entry in the table.
For e.g. if a role has access to VLAN 1, 2, 6 and 7;
VSAN 2, 5 and 8 and interface 2/1 and 2/3, this table
will have 9 entries, 4 for VSANs, 3 for VLANs and 2 for
Interfaces.
Entries in this table can be created/deleted using
ccreRoleScopeRowStatus.
The table provides the same information as
'commonRoleScopeRestriction', 'commonRoleScope1' and
'commonRoleScope2' but in a different way.
The object 'commonRoleScope1' and 'commonRoleScope2'
are 256*8 bit mask with each bit representing a VLAN.
'commonRoleScope1' identifies VLANS 1 to 2048 whereas
'commonRoleScope2' identifies VLANS 2049 to 4096.
In this table, there is a separate entry for each VSAN,
along with separate entry for each VLAN and Interface
to which a role has access. The purpose of this table
is to remove the limit of 4096 that are supported by
'commonRoleTable'.
All entries in this table are persistent across device
reboots |
| ccreRoleScopeEntry | 1.3.6.1.4.1.9.9.651.1.2.3.1 | | not-accessible | An entry (conceptual row) in the ccreRoleScopeTable.
There is one entry for each different scope value of a
Role. If a Role 'R1' is defined to have scope on
VSAN-1, VSAN-2, VLAN-1, VLAN#, Interface fc1/1 and
fc1/2, then there will be six entries for role 'R1' in
this table, one each for VSAN-1, VSAN2, VLAN-1, VLAN-1,
fc1/1 and fc1/2. |
| U32 ccreRoleScopeIndex | 1.3.6.1.4.1.9.9.651.1.2.3.1.1 | Unsigned32 | not-accessible | An index value for this entry which uniquely
distinguishes it from all other entries for same
Role. |
| INT ccreRoleScopeRestriction | 1.3.6.1.4.1.9.9.651.1.2.3.1.2 | INTEGER | read-create | This object indicates the type of the scope restriction
about which the information is provided by row. |
| I32 ccreRoleScopeValue | 1.3.6.1.4.1.9.9.651.1.2.3.1.3 | Integer32 | read-create | This object identifies the resource this role
can access.
If the value of 'ccreRoleScopeRestriction' is 'vsan'
or 'vlan', this object specifies the Id (which is
a number) of the VSAN/VLAN.
If the value of 'ccreRoleScopeRestriction' is
'interface', this object specifies the IfIndex
of the interface. |
| ROW ccreRoleScopeRowStatus | 1.3.6.1.4.1.9.9.651.1.2.3.1.4 | RowStatus | read-create | Status of this scope restriction entry. |
| ccreRuleConfig | 1.3.6.1.4.1.9.9.651.1.3 | | | |
| ccreRuleTable | 1.3.6.1.4.1.9.9.651.1.3.2 | | not-accessible | This table lists all the rules configured for roles
defined in the ccreRoleTable. Each rule defines the
access (permit/deny) allowed to a particular command,
feature or a feature group.
Entries in this table are also created/deleted using
ccreRuleRowStatus.
A row in this table cannot be made 'active' until a
value is explicitly provided for that row's instances
of following objects :
- ccreRuleOperation
If ccreRuleFeatureElementName is a command,
then
- ccreRuleOperation is not needed to be set
A device implementing this MIB need not implement the
objects that form a conceptual row in the
'commonRuleRoleTable' table, which is defined in the
CISCO-COMMON-ROLES-MIB.
There is no relation between the rows in
'commonRuleRoleTable' and this table as both define
different operation types. Each table can have rows
with no corresponding rows in other table.
All entries in this table are persistent across device
reboots |
| ccreRuleEntry | 1.3.6.1.4.1.9.9.651.1.3.2.1 | | not-accessible | An entry (conceptual row) in the ccreRuleRuleTable.
There is one entry for each Rule contained in a Role.
For eg. if a Role 'R1' has 6 rules, there will be
six entries for Role 'R1'. |
| U32 ccreRuleNumber | 1.3.6.1.4.1.9.9.651.1.3.2.1.1 | Unsigned32 | not-accessible | A unique index for a rule in a particular role.
The rule are applied according to their rule
number, i.e. Rule 1 will be the first rule applied
followed by Rule 2 and so on.
Rule numbers need not be contiguous, for e.g. a Role
can have three rule numbered 1, 4 & 7. Further when
a new rule is added to this Role it can be rule number
2 or 5 or 9 (any number other than 1, 4 and 7). |
| STR ccreRuleFeatureElementName | 1.3.6.1.4.1.9.9.651.1.3.2.1.2 | SnmpAdminString | read-create | Name of the command or feature or feature group.
If this is a zero-length string, then this rule applies
to all the features supported on the device as
enumerated in commonRoleFeatureTable. |
| INT ccreRuleFeatureElementType | 1.3.6.1.4.1.9.9.651.1.3.2.1.3 | INTEGER | read-create | Specifies the type of entry (command or feature or
feature group) as specified by the object
ccreRuleFeatureElementName |
| CCR ccreRuleOperation | 1.3.6.1.4.1.9.9.651.1.3.2.1.4 | CcreOperation | read-create | The operation for this rule. |
| T/F ccreRuleOperationPermitted | 1.3.6.1.4.1.9.9.651.1.3.2.1.5 | TruthValue | read-create | This object tells if the operation
`ccreRuleOperation' is permitted or denied.
The operation is permitted if
the value of this object is `true'.
If the value of the object is 'false', the operation is
not permitted. |
| ROW ccreRuleRowStatus | 1.3.6.1.4.1.9.9.651.1.3.2.1.6 | RowStatus | read-create | Status of this rule. |
| ciscoCommonRolesExtMIBConformance | 1.3.6.1.4.1.9.9.651.2 | | | |
| ccreMIBCompliances | 1.3.6.1.4.1.9.9.651.2.1 | | | |
| ccreMIBCompliance | 1.3.6.1.4.1.9.9.651.2.1.1 | | | The compliance statement for entities which
implement the CISCO-COMMON-ROLES-EXT-MIB. |
| ccreMIBGroups | 1.3.6.1.4.1.9.9.651.2.2 | | | |
| ccreConfigurationGroup | 1.3.6.1.4.1.9.9.651.2.2.1 | | | A collection of objects for Common Roles
Extention configuration. |
