CISCO-CIPTG-MIB

All MIBs › CISCO-CIPTG-MIB

Organization: cisco IBU Engineering Working Group

Last Updated: 1999-01-25

Category: Cisco Devices, SNA and Legacy Protocols

Description: Monitors transmission group (TG) statistics on the Cisco Channel Interface Processor for SNA multi-link transmission group management.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-CIPTG-MIB?

CISCO-CIPTG-MIB is a Cisco MIB for managing Transmission Groups (TGs) on the Channel Interface Processor (CIP) within Cisco Mainframe Channel Connection (CMCC) environments, which connect Cisco routers to IBM mainframe SNA/APPN networks. It exposes configuration data for LLC-based transmission groups, including LAN type, adapter number, local/remote SAP and MAC address bindings, and row-status objects for managing TG entries, along with an operational-state table for runtime status. Its monitoring value is centered on SNA/mainframe connectivity health: administrators check cipTgLlcOperState to confirm a transmission group between the router and mainframe channel is operationally up, and verify cipTgLlcAdminLSAP/cipTgLlcAdminRSAP and cipTgLlcAdminRMAC settings match the expected mainframe-side configuration, catching misconfigurations that would prevent SNA traffic from flowing. It is specific to Cisco's CMCC/CIP hardware and SNA/APPN protocol stack, with no dependency on general IP-oriented standard MIBs. It is typically deployed on Cisco CIP-equipped routers bridging legacy IBM mainframe SNA traffic into modern IP networks. Engineers can download the CISCO-CIPTG-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-CIPTG-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco routers with Channel Interface Processor (CIP) for CMCC mainframe connectivity

Monitoring Examples

An operator would walk cipTgLlcAdminTable / cipTgLlcAdminEntry to verify cipTgLlcAdminLSAP, cipTgLlcAdminRSAP, and cipTgLlcAdminRMAC match the mainframe channel's expected configuration, then check the corresponding cipTgLlcOperTable entry's cipTgLlcOperState to confirm the transmission group is operationally active. A TG stuck in a down operational state despite correct admin settings would point to a physical channel or mainframe-side connectivity problem.

What Can Be Monitored

transmission group operational state
LLC adapter/LAN type configuration
local/remote SAP configuration
remote MAC address binding
transmission group row status

Imported Objects

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From CISCO-TC

SAPType

From RFC1213-MIB

ifIndex

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
Counter64
Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
MacAddress
RowStatus
TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using cipTgLlcStatsIFramesIn OID:

Select a Cisco routers with CIP mainframe channel connectivity (legacy) as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cipTgLlcStatsIFramesIn into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. The number of LLC I-Frames received by this LLC connection TG from the remote network node. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
cipTgCmgr	1.3.6.1.4.1.9.9.73.1.3
INT cipTgCmgrOperConnStatus	1.3.6.1.4.1.9.9.73.1.3.1.1.10	INTEGER	read-only	Activation state of the CMPC+ TG Connection Manager connection. reset - Awaiting Cmgr Connection Request from the host. active - A Cmgr Connection Request has been receive from the host and CMCC has returned Cmgr Connection Request to the host. The Cmgr connection is now active.
cipTgCmgrOperEntry	1.3.6.1.4.1.9.9.73.1.3.1.1		not-accessible	A list of CMCC TG Connection Manager operational values.
CHA cipTgCmgrOperLocalConnToken	1.3.6.1.4.1.9.9.73.1.3.1.1.7	ChannelTgToken	read-only	The CMCC's token/handle for this CMPC+ TG Cmgr connection. This token is included in the Cmgr connection activation message sent to the host.
CHA cipTgCmgrOperLocalGrToken	1.3.6.1.4.1.9.9.73.1.3.1.1.3	ChannelTgToken	read-only	The CMCC's Group Token for this CMPC+ TG. This token is included in the XID2 sent by the CMCC. Requests for Connection Manager virtual circuit and Connection activation and deactivation flow on this token.
CHA cipTgCmgrOperLocalVcToken	1.3.6.1.4.1.9.9.73.1.3.1.1.5	ChannelTgToken	read-only	The CMCC's token/handle for this CMPC+ TG Cmgr VC. This token is included in the Connection Manager virtual circuit activation message sent to the host.
CHA cipTgCmgrOperName	1.3.6.1.4.1.9.9.73.1.3.1.1.1	ChannelTgName	not-accessible	This is the name for this instance of a CMPC+ TG.
CHA cipTgCmgrOperRemoteConnToken	1.3.6.1.4.1.9.9.73.1.3.1.1.8	ChannelTgToken	read-only	The host's token/handle for this CMPC+ TG Cmgr connection. This token is extracted from the Cmgr connection activation message received from the host.
CHA cipTgCmgrOperRemoteGrToken	1.3.6.1.4.1.9.9.73.1.3.1.1.4	ChannelTgToken	read-only	The host's Group Token for this CMPC+ TG. This token is extracted from the XID2 sent by the the host to the CMCC. Requests for Connection Manager virtual circuit and Connection activation and deactivation flow on this token.
CHA cipTgCmgrOperRemoteVcToken	1.3.6.1.4.1.9.9.73.1.3.1.1.6	ChannelTgToken	read-only	The host's token/handle for this CMPC+ TG Cmgr VC. This token is extracted from the Connection Manager virtual circuit activation message received from the host.
cipTgCmgrOperTable	1.3.6.1.4.1.9.9.73.1.3.1		not-accessible	This table contains operational information for a CMPC+ TG Connection Manager instance. An instance of this table is created for every CMPC+ TG.
INT cipTgCmgrOperType	1.3.6.1.4.1.9.9.73.1.3.1.1.2	INTEGER	read-only	Type of Connection Manager for TG. pointToPoint - One MPC+ connection per TG is supported between the host and the CMCC. pointToMultiPoint - Multiple MPC+ connections per TG are supported between the host and the CMCC.
INT cipTgCmgrOperVcStatus	1.3.6.1.4.1.9.9.73.1.3.1.1.9	INTEGER	read-only	Activation state of the CMPC+ TG connection Manager virtual circuit. reset - Awaiting virtual circuit activate indication from the host. active - A virtual circuit active indication has been receive from the host and CMCC has sent a virtual circuit active indication to the host. The virtual circuit is now active.
cipTgIp	1.3.6.1.4.1.9.9.73.1.2
T/F cipTgIpAdminBroadcast	1.3.6.1.4.1.9.9.73.1.2.1.1.5	TruthValue	read-create	Indicates whether or not broadcast packets are to be sent to the host.
cipTgIpAdminEntry	1.3.6.1.4.1.9.9.73.1.2.1.1		not-accessible	A list of CMCC IP TG configuration values.
IP cipTgIpAdminLocalIpAddr	1.3.6.1.4.1.9.9.73.1.2.1.1.4	IpAddress	read-create	The IP address of the CMCC for this TG.
CHA cipTgIpAdminName	1.3.6.1.4.1.9.9.73.1.2.1.1.1	ChannelTgName	not-accessible	This is the name for this instance of an CMPC+ IP transmission group (TG).
IP cipTgIpAdminRemoteIpAddr	1.3.6.1.4.1.9.9.73.1.2.1.1.3	IpAddress	read-create	The IP address of the Host IP stack using this TG. The CMCC will forward packets with this IP address as the destination IP address up to the host IP stack.
ROW cipTgIpAdminRowStatus	1.3.6.1.4.1.9.9.73.1.2.1.1.6	RowStatus	read-create	This object is used by a Management Station to create or delete the row entry in the cipTgIpAdminTable following the the RowStatus textual convention.
cipTgIpAdminTable	1.3.6.1.4.1.9.9.73.1.2.1		not-accessible	This table contains CMCC configuration information for each instance of a CMPC+ IP Transmission Group (TG). An instance of this table is created for every CMPC+ IP configured on a CMCC card.
INT cipTgIpAdminType	1.3.6.1.4.1.9.9.73.1.2.1.1.2	INTEGER	read-create	The type of host IP stack that is using this TG.
INT cipTgIpOperConnStatus	1.3.6.1.4.1.9.9.73.1.2.2.1.6	INTEGER	read-only	Activation state of this CMPC+ TG IP connection. reset - Awaiting MPC+ IP Connection Request from the host. connRequestSent - The CMCC has sent an MPC+ IP Connection Request to the host and is awaiting an MPC+ IP Connection Confirm from the host. pendingActive - The CMCC is waiting for the host to enable traffic flow on the IP connection. active - The MPC+ IP connection is active and both the CMCC and the host have enabled traffic flow on the connection.
cipTgIpOperEntry	1.3.6.1.4.1.9.9.73.1.2.2.1		not-accessible	A list of CMCC IP TG operational values.
CHA cipTgIpOperLocalConnToken	1.3.6.1.4.1.9.9.73.1.2.2.1.3	ChannelTgToken	read-only	The CMCC's token/handle for this CMPC+ TG IP connection. This token is included in the IP connection activation message sent to the host.
CHA cipTgIpOperLocalVcToken	1.3.6.1.4.1.9.9.73.1.2.2.1.1	ChannelTgToken	read-only	The CMCC's token/handle for this CMPC+ TG IP VC. This token is included in the IP protocol virtual circuit activation message sent to the host.
CHA cipTgIpOperRemoteConnToken	1.3.6.1.4.1.9.9.73.1.2.2.1.4	ChannelTgToken	read-only	The host's token/handle for this CMPC+ TG IP connection. This token is extracted from the IP connection activation message received from the host.
CHA cipTgIpOperRemoteVcToken	1.3.6.1.4.1.9.9.73.1.2.2.1.2	ChannelTgToken	read-only	The host's token/handle for this CMPC+ TG IP VC. This token is extracted from the IP protocol virtual circuit activation message received from the host.
cipTgIpOperTable	1.3.6.1.4.1.9.9.73.1.2.2		not-accessible	This table contains operational information for a CMPC+ IP TG instance. An instance of this table is created for every CMPC+ IP TG.
INT cipTgIpOperVcStatus	1.3.6.1.4.1.9.9.73.1.2.2.1.5	INTEGER	read-only	Activation state of this CMPC+ TG IP virtual circuit. reset - Awaiting an MPC+ IP virtual circuit activate indication from the host. active - An MPC+ IP virtual circuit active indication has been receive from the host and CMCC has sent an MPC+ IP virtual circuit active indication to the host. The MPC+ IP virtual circuit is now active.
C32 cipTgIpStatsBytesIn	1.3.6.1.4.1.9.9.73.1.2.3.1.2	Counter32	read-only	The number of bytes received in IP packets from the IP network for this CMPC+ IP TG.
C32 cipTgIpStatsBytesOut	1.3.6.1.4.1.9.9.73.1.2.3.1.5	Counter32	read-only	The number of bytes sent in IP packets from host to the IP network over this CMPC+ IP TG.
cipTgIpStatsEntry	1.3.6.1.4.1.9.9.73.1.2.3.1		not-accessible	A list of CMCC CMPC+ IP TG statistical objects.
C64 cipTgIpStatsHCBytesIn	1.3.6.1.4.1.9.9.73.1.2.3.1.3	Counter64	read-only	The number of bytes received in IP packets from the IP network for this CMPC+ IP TG. Note: This is a 64-bit (High Capacity) version of cipTgIpStatsBytesIn counter used for use with SNMP Version 2 Managers.
C64 cipTgIpStatsHCBytesOut	1.3.6.1.4.1.9.9.73.1.2.3.1.6	Counter64	read-only	The number of bytes sent in IP packets from host to the IP network over this CMPC+ IP TG. Note: This is a 64-bit (High Capacity) version of cipTgIpStatsBytesOut counter used for use with SNMP Version 2 Managers.
C32 cipTgIpStatsPacketsIn	1.3.6.1.4.1.9.9.73.1.2.3.1.1	Counter32	read-only	The number of IP packets received from the IP network for this CMPC+ IP TG.
C32 cipTgIpStatsPacketsOut	1.3.6.1.4.1.9.9.73.1.2.3.1.4	Counter32	read-only	The number of IP packets sent by the host to the IP network over this CMPC+ IP TG.
cipTgIpStatsTable	1.3.6.1.4.1.9.9.73.1.2.3		not-accessible	This table contains statistical information for each instance of a CMCC CMPC+ IP Transmission Group (TG). Each instance of this table is created for every CMPC+ IP TG with a unique tg-name configured on a CMCC card.
cipTgLlc	1.3.6.1.4.1.9.9.73.1.1
INT cipTgLlcAdminAdaptNo	1.3.6.1.4.1.9.9.73.1.1.1.1.3	INTEGER	read-create	The CMCC internal adapter that is used by this LLC TG as the local MAC address for the LLC connection with the remote network node.
cipTgLlcAdminEntry	1.3.6.1.4.1.9.9.73.1.1.1.1		not-accessible	A list of CMCC LLC TG configuration values.
INT cipTgLlcAdminLanType	1.3.6.1.4.1.9.9.73.1.1.1.1.2	INTEGER	read-create	The LAN media type that this LLC TG uses to establish LLC communications with the specified remote network node.
SAP cipTgLlcAdminLSAP	1.3.6.1.4.1.9.9.73.1.1.1.1.4	SAPType	read-create	The local SAP address that this LLC TG opens on the specified CMCC internal MAC adapter and used by this TG to establish the LLC connection with the remote network node.
CHA cipTgLlcAdminName	1.3.6.1.4.1.9.9.73.1.1.1.1.1	ChannelTgName	not-accessible	This is the name for this instance of a LLC connection transmission group (TG).
MAC cipTgLlcAdminRMAC	1.3.6.1.4.1.9.9.73.1.1.1.1.5	MacAddress	read-create	The remote MAC address that this LLC TG uses to establish the LLC connection with the remote network node. This is the MAC address of the remote network node device. If this object is not specified, it will default to the MAC Address specified by the cipTgLlcAdminLanType and cipTgLlcAdminAdaptNo objects.
ROW cipTgLlcAdminRowStatus	1.3.6.1.4.1.9.9.73.1.1.1.1.7	RowStatus	read-create	This object is used by a Management Station to create or delete the row entry in the cipTgLlcAdminTable following the the RowStatus textual convention. Upon successful creation of the row, an Agent automatically creates a corresponding entry in the cipTgLlcOperTable and cipTgLlcStatsTable. cipTgLlcAdminRMAC and cipTgLlcAdminRSAP do not need to be specified in order to create a row. These objects will be automatically set to their default values. The Management Station can initiate row deletion, by setting this value to 'destroy (6)'. The Agent will then delete the rows corresponding to this CMCC LLC TG instance from the cipTgLlcAdminTable, cipTgLlcOperTable and cipTgLlcStatsTable.
SAP cipTgLlcAdminRSAP	1.3.6.1.4.1.9.9.73.1.1.1.1.6	SAPType	read-create	The remote SAP address that this LLC TG uses to establish the LLC connection with the remote network node. This is the SAP address of the remote network node device.
cipTgLlcAdminTable	1.3.6.1.4.1.9.9.73.1.1.1		not-accessible	This table contains CMCC configuration information for each instance of a Cisco CMCC Transmission Group (TG) using LLC as the DLC to establish a connection to a remote network node. Each instance of this table is created for every LLC TG with a unique tg-name configured on a CMCC card.
INT cipTgLlcOperConnStatus	1.3.6.1.4.1.9.9.73.1.1.2.1.16	INTEGER	read-only	Activation state of this CMPC+ TG APPN connection. reset - Awaiting MPC+ APPN Connection Request from the host. connRequestSent - The CMCC has sent an MPC+ APPN Connection Request to the host and is awaiting an MPC+ APPN Connection Confirm from the host. pendingActive - The CMCC is waiting for the host to enable traffic flow on the APPN connection. active - The MPC+ APPN connection is active and both the CMCC and the host have enabled traffic flow on the connection.
cipTgLlcOperEntry	1.3.6.1.4.1.9.9.73.1.1.2.1		not-accessible	A list of CMCC LLC TG operational values.
T/F cipTgLlcOperHpr	1.3.6.1.4.1.9.9.73.1.1.2.1.7	TruthValue	read-only	Indicates whether HPR is active on this LLC TG.
SAP cipTgLlcOperHprLSAP	1.3.6.1.4.1.9.9.73.1.1.2.1.8	SAPType	read-only	The local SAP value used on this CMPC LLC connection TG for HPR traffic. This value is extracted from XID3s during the connection negotiation between VTAM and the remote node.
SAP cipTgLlcOperHprRSAP	1.3.6.1.4.1.9.9.73.1.1.2.1.9	SAPType	read-only	The remote SAP value used on this LLC connection TG for HPR traffic. This value is extracted from XID3s during the connection negotiation between the host and the remote node.
CHA cipTgLlcOperLocalConnToken	1.3.6.1.4.1.9.9.73.1.1.2.1.13	ChannelTgToken	read-only	The CMCC's token/handle for this CMPC+ TG APPN connection. This token is included in the APPN connection activation message sent to the host.
STR cipTgLlcOperLocalCP	1.3.6.1.4.1.9.9.73.1.1.2.1.3	DisplayString	read-only	The local control point name for the host. The name is extracted from the XID3s received from the host and sent to the remote network node. While the LLC TG is in any state other than contactPending or active, the local Control Point will be unknown and the size of this string will be zero.
CHA cipTgLlcOperLocalVcToken	1.3.6.1.4.1.9.9.73.1.1.2.1.11	ChannelTgToken	read-only	The CMCC's token/handle for this CMPC+ TG APPN VC. This token is included in the APPN protocol virtual circuit activation message sent to the host.
I32 cipTgLlcOperMaxIn	1.3.6.1.4.1.9.9.73.1.1.2.1.5	Integer32	read-only	The maximum PIU the remote node is allowed to send to the host. The value is extracted from XID3s received from the host.
I32 cipTgLlcOperMaxOut	1.3.6.1.4.1.9.9.73.1.1.2.1.6	Integer32	read-only	The maximum PIU VTAM is allowed to send to the remote node. The value is extracted from the XID3s received from the remote node.
CHA cipTgLlcOperRemoteConnToken	1.3.6.1.4.1.9.9.73.1.1.2.1.14	ChannelTgToken	read-only	The host's token/handle for this CMPC+ TG APPN connection. This token is extracted from the APPN connection activation message received from the host.
STR cipTgLlcOperRemoteCP	1.3.6.1.4.1.9.9.73.1.1.2.1.4	DisplayString	read-only	The remote control point name for the remote node connected to this TG. The name is extracted from the XID3s received from the remote network node and sent to the host. While the LLC TG is in any state other than contactPending or active, the remote Control Point will be unknown and the size of this string will be zero.
CHA cipTgLlcOperRemoteVcToken	1.3.6.1.4.1.9.9.73.1.1.2.1.12	ChannelTgToken	read-only	The host's token/handle for this CMPC+ TG APPN VC. This token is extracted from the APPN protocol virtual circuit activation message received from the host.
OCT cipTgLlcOperRIF	1.3.6.1.4.1.9.9.73.1.1.2.1.10	OCTET STRING	read-only	The Routing Information Field for this LLC connection TG. If the connection is not established using Source-Route Bridging, then this value will have a zero length.
INT cipTgLlcOperState	1.3.6.1.4.1.9.9.73.1.1.2.1.1	INTEGER	read-only	Activation state of the CMCC LLC TG. shutdown - CMCC interface with this LLC TG is shutdown. reset - This LLC TG interface is up, but LLC connection establishment has not started. locatePeer - This LLC TG has sent a test command to the configured remote network node. peerLocated - This LLC TG has sent an LLC TEST command and received a TEST rsp from the configured remote network node. negotiation - XID3 negotiation between the host and the remote network node has begun using this LLC connection TG. contactPending - The LLC session negotiation is complete. This LLC TG has sent or received a SABME. active - LLC connection TG is active.
cipTgLlcOperTable	1.3.6.1.4.1.9.9.73.1.1.2		not-accessible	This table contains operational information for each instance of a CMCC Transmission Group (TG) using LLC as the DLC to establish a connection to a remote network node. Each instance of this table is created for every LLC TG with a unique tg-name configured on a CMCC card.
I32 cipTgLlcOperTGN	1.3.6.1.4.1.9.9.73.1.1.2.1.2	Integer32	read-only	The TG number for this LLC connection TG. This value is extracted from the XID3 negotiation exchange between the host and the remote network node.
INT cipTgLlcOperVcStatus	1.3.6.1.4.1.9.9.73.1.1.2.1.15	INTEGER	read-only	Activation state of this CMPC+ TG APPN virtual circuit. reset - Awaiting an MPC+ APPN virtual circuit activate indication from the host. active - An MPC+ APPN virtual circuit active indication has been receive from the host and CMCC has sent an MPC+ APPN virtual circuit active indication to the host. The MPC+ APPN virtual circuit is now active.
C32 cipTgLlcStatsConnNumberRecv	1.3.6.1.4.1.9.9.73.1.1.3.1.19	Counter32	read-only	Number of connection-oriented MPC+ frames received from the host over this TG.
C32 cipTgLlcStatsConnNumberSent	1.3.6.1.4.1.9.9.73.1.1.3.1.20	Counter32	read-only	Number of connection-oriented MPC+ frames sent to the host over this TG.
cipTgLlcStatsEntry	1.3.6.1.4.1.9.9.73.1.1.3.1		not-accessible	A list of CMCC LLC TG statistical objects.
C64 cipTgLlcStatsHCIFrameBytesIn	1.3.6.1.4.1.9.9.73.1.1.3.1.3	Counter64	read-only	The number of LLC I-Frame bytes received by this LLC connection TG from the remote network node. NOTE: This is a 64 bit (High Capacity) version of the cipTgLlcStatsIFrameBytesIn counter for use with SNMP Version 2 Managers
C64 cipTgLlcStatsHCIFrameBytesOut	1.3.6.1.4.1.9.9.73.1.1.3.1.6	Counter64	read-only	The number of LLC I-Frame bytes sent by this LLC connection TG to the remote network node. NOTE: This is a 64 bit (High Capacity) version of the cipTgLlcStatsIFrameBytesOut counter for use with SNMP Version 2 Managers
C64 cipTgLlcStatsHCUIFrameBytesIn	1.3.6.1.4.1.9.9.73.1.1.3.1.9	Counter64	read-only	The number of LLC UI-Frame bytes received by this LLC connection TG from the remote network node. NOTE: This is a 64 bit (High Capacity) version of the cipTgLlcStatsUIFrameBytesIn counter for use with SNMP Version 2 Managers
C64 cipTgLlcStatsHCUIFrameBytesOut	1.3.6.1.4.1.9.9.73.1.1.3.1.12	Counter64	read-only	The number of LLC UI-Frame bytes sent by this LLC connection TG to the remote network node. NOTE: This is a 64 bit (High Capacity) version of the cipTgLlcStatsIFrameBytesOut counter for use with SNMP Version 2 Managers
C32 cipTgLlcStatsIFrameBytesIn	1.3.6.1.4.1.9.9.73.1.1.3.1.2	Counter32	read-only	The number of LLC I-Frame bytes received by this LLC connection TG from the remote network node.
C32 cipTgLlcStatsIFrameBytesOut	1.3.6.1.4.1.9.9.73.1.1.3.1.5	Counter32	read-only	The number of LLC I-Frame bytes sent by this LLC connection TG to the remote network node.
C32 cipTgLlcStatsIFramesInEx	1.3.6.1.4.1.9.9.73.1.1.3.1.1	Counter32	read-only	The number of LLC I-Frames received by this LLC connection TG from the remote network node.
C32 cipTgLlcStatsIFramesOut	1.3.6.1.4.1.9.9.73.1.1.3.1.4	Counter32	read-only	The number of LLC I-Frames sent by this LLC connection TG to the remote network node.
cipTgLlcStatsTable	1.3.6.1.4.1.9.9.73.1.1.3		not-accessible	This table contains statistical information for each instance of a CMCC LLC connection Transmission Group (TG). Each instance of this table is created for every LLC TG with a unique tg-name configured on a CMCC card.
C32 cipTgLlcStatsTestCmdsOut	1.3.6.1.4.1.9.9.73.1.1.3.1.13	Counter32	read-only	Number of TEST commands sent by this LLC TG to the configured remote MAC address.
C32 cipTgLlcStatsTestRspsIn	1.3.6.1.4.1.9.9.73.1.1.3.1.14	Counter32	read-only	Number of TEST responses received by this LLC TG.
C32 cipTgLlcStatsUIFrameBytesIn	1.3.6.1.4.1.9.9.73.1.1.3.1.8	Counter32	read-only	The number of LLC UI-Frame bytes received by this LLC connection TG from the remote network node.
C32 cipTgLlcStatsUIFrameBytesOut	1.3.6.1.4.1.9.9.73.1.1.3.1.11	Counter32	read-only	The number of LLC UI-Frame bytes sent by this LLC connection TG to the remote network node.
C32 cipTgLlcStatsUIFramesIn	1.3.6.1.4.1.9.9.73.1.1.3.1.7	Counter32	read-only	Number of LLC UI Frames (HPR frames) received by this CMPC LLC connection TG from the remote network node.
C32 cipTgLlcStatsUIFramesOut	1.3.6.1.4.1.9.9.73.1.1.3.1.10	Counter32	read-only	Number of LLC UI Frames (HPR frames) sent by this CMPC LLC connection TG to the remote network node.
C32 cipTgLlcStatsXidCmdsIn	1.3.6.1.4.1.9.9.73.1.1.3.1.15	Counter32	read-only	Number of XID commands received by this LLC TG.
C32 cipTgLlcStatsXidCmdsOut	1.3.6.1.4.1.9.9.73.1.1.3.1.16	Counter32	read-only	Number of XID commands sent by this LLC TG.
C32 cipTgLlcStatsXidRspsIn	1.3.6.1.4.1.9.9.73.1.1.3.1.17	Counter32	read-only	Number of XID responses received by this LLC TG.
C32 cipTgLlcStatsXidRspsOut	1.3.6.1.4.1.9.9.73.1.1.3.1.18	Counter32	read-only	Number of XID responses sent by this LLC TG.
cipTgObjects	1.3.6.1.4.1.9.9.73.1
ciscoCipTgCmgrGroup	1.3.6.1.4.1.9.9.73.3.2.5			A collection of objects providing CMCC TG Connection Manager Operational status.
ciscoCipTgIpGroup	1.3.6.1.4.1.9.9.73.3.2.4			A collection of objects providing CMCC IP TG Administration, Operational status and Statistics.
ciscoCipTgLlcGroup	1.3.6.1.4.1.9.9.73.3.2.2			A collection of objects providing CMCC LLC TG Administration, Operational status and Statistics.
ciscoCipTgLlcGroupRev1	1.3.6.1.4.1.9.9.73.3.2.3			A collection of objects providing CMCC LLC TG Administration, Operational status and Statistics.
ciscoCipTgMIB	1.3.6.1.4.1.9.9.73			This is the Management Information Base (MIB) module for objects used to manage Transmission Groups (TGs) in Cisco Mainframe Channel Connection (CMCC) environments. --------------------------------------------------- \| Acronym Definitions: \| \| CIP = Channel Interface Processor \| \| CMCC = Cisco Mainframe Channel Connection \| \| Cmgr = Connection Manager \| \| HPDT = High Performance Data Transfer \| \| HPR = High Performance Routing \| \| HSAS = High Speed Access Services \| \| LLC = Logical Link Control \| \| MPC = Multi-Path Channel \| \| MPC+ = HPDT MPC \| \| SNA = Systems Network Architecture \| \| TG = Transmission Group \| \| VC = Virtual Circuit \| --------------------------------------------------- This MIB consists of the following tables: 1) TG LLC Connection Administration 2) TG LLC Connection Operational 3) TG LLC Connection Statistics 4) TG IP Connection Administration 5) TG IP Connection Operational 6) TG IP Connection Statistics 7) TG Connection Manager Operational Refer to the following MIBs for an understanding of Cisco CIP internal LAN and adapter terminology: CISCO-CIPLAN-MIB
ciscoCipTgMibCompliance	1.3.6.1.4.1.9.9.73.3.1.1			The compliance statement for the CMCC TG feature.
ciscoCipTgMibComplianceRev1	1.3.6.1.4.1.9.9.73.3.1.2			The compliance statement for the CMCC TG feature.
ciscoCipTgMibCompliances	1.3.6.1.4.1.9.9.73.3.1
ciscoCipTgMibConformance	1.3.6.1.4.1.9.9.73.3
ciscoCipTgMibGroups	1.3.6.1.4.1.9.9.73.3.2

RFC description

Manages Transmission Groups in Cisco Mainframe Channel Connection (CMCC) environments for SNA and channel connectivity.

Start monitoring Cisco routers with CIP mainframe channel connectivity (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-CIPTG-MIB