BASIS-RAS-DISK-MIB

All MIBs › BASIS-RAS-DISK-MIB

Category: Cisco Devices, Hardware and Environment

Description: Tracks disk storage status for shelf components of the Cisco MGX/BASIS RAS (Remote Access Server).

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is BASIS-RAS-DISK-MIB?

BASIS-RAS-DISK-MIB is a legacy Cisco (built on BASIS-MIB, MGX8220 ATM switch platform) proprietary MIB reporting RAS (Route/Alarm Server?) hard-disk health. Its objects cover disk status/health, standby-disk health, wakeup interval, last check time, bad-sector count, and corrupted PRI/firmware file counts. As a hardware-status MIB it lets an administrator confirm control-card disk health and detect corrupted configuration/firmware files on a legacy Cisco MGX8220 switch. It is deployed on the legacy Cisco MGX8220 ATM switch platform. Engineers can download the BASIS-RAS-DISK-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in BASIS-RAS-DISK-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Legacy Cisco MGX8220 ATM switch platform

Monitoring Examples

An administrator checks dskHealth and numBadSectors to confirm control-card disk health on a legacy Cisco MGX8220 switch.

What Can Be Monitored

control-card disk health and corrupted-file detection

Imported Objects

From BASIS-MIB

axisDiagnostics

OBJECT-IDENTITY

From RFC-1212

OBJECT-TYPE

From RFC1213-MIB

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
rasDsk	1.3.6.1.4.1.351.110.6.2
INT rasDskStatus	1.3.6.1.4.1.351.110.6.2.1	INTEGER	read-write	Indicates whether the RAS Disk diagnostics has been Enabled or not.
INT dskHealth	1.3.6.1.4.1.351.110.6.2.2	INTEGER	read-only	Shows the Status of the Hard Disk, which depends on the number of corrupted files and number of Bad sectors in the ASC. The Status is PASS if there are no Corrupted files in the Disk AND the number of Bad Sectors is within the threshold value. If the Disk has one or more Corrupted files OR if the Number of Bad Sectors exceeds the threshold value, the Status is FAIL. If Diagnostics is going on, the Status is TestInProgress. Status will be UNKNOWN until the diagnostics starts for the first time.
INT standbyDskHealth	1.3.6.1.4.1.351.110.6.2.3	INTEGER	read-only	Shows the Status of the Standby ASC Hard Disk, which depends on the number of corrupted files and number of Bad sectors in the Standby ASC. The Status is UNKNOWN, if there is no Standby ASC in the shelf.
INT wakeupInterval	1.3.6.1.4.1.351.110.6.2.4	INTEGER	read-write	Indicates the RAS Disk diagnostics task Wake up time period, in HOURS. This Interval is configurable between 12 hours and 7 days. If RAS Disk diagnostics is Enabled, the diagnostics starts whenever the wakeupInterval is elapsed. If RAS Disk diagnostics is Enabled AND if the CLI cnfrasdsk is executed, then the Disk diagnostics starts immediately.
STR lastTime	1.3.6.1.4.1.351.110.6.2.5	DisplayString	read-only	Shows the Time when the RAS Disk diagnostics was Last done. The format is DD MONTH HH:MM:SS.
INT numBadSectors	1.3.6.1.4.1.351.110.6.2.6	INTEGER	read-only	Indicates the Number of Bad Sectors found in the Disk.
INT crptdPRIfiles	1.3.6.1.4.1.351.110.6.2.7	INTEGER	read-only	Indicates the Number of SM configuration files, corrupted.
INT crptdFWfiles	1.3.6.1.4.1.351.110.6.2.8	INTEGER	read-only	Indicates the Number of FirmWare files, corrupted.

RFC description

Monitors disk storage for the Cisco MGX/BASIS RAS (Remote Access Server) shelf components.

Start monitoring Cisco MGX8220 ATM switch platform (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download BASIS-RAS-DISK-MIB

What Is BASIS-RAS-DISK-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description