CISCO-LATITUDE-MIB

All MIBs › CISCO-LATITUDE-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2004-08-16

Category: Cisco Devices, Device Management

Description: Manages Cisco Latitude geographic location and positioning data for network device tracking.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-LATITUDE-MIB?

CISCO-LATITUDE-MIB is a Cisco Systems, Inc. proprietary MIB (enterprise OID 7185) for the Cisco Latitude MeetingPlace conferencing platform, defining hardware/software alarm traps. Its objects cover an exception code, system/hardware device/unit/slot/port identifiers, an alarm description, and dedicated traps for T1-down, gateway-system-integrity, and major/minor hardware/software alarms. As a notification MIB it lets an administrator receive a T1-circuit-down or hardware/software alarm from a MeetingPlace conferencing server with the exact device/slot/port location. It is deployed on Cisco Latitude MeetingPlace conferencing platforms. Engineers can download the CISCO-LATITUDE-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-LATITUDE-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Latitude MeetingPlace conferencing platforms

Monitoring Examples

An administrator receives an mpT1Down trap and reads mpHwSlot/mpHwPort to locate the failed T1 circuit on a Cisco Latitude MeetingPlace conferencing server.

What Can Be Monitored

T1 circuit and hardware/software alarm conditions

Imported Objects

From SNMPv2-CONF

MODULE-COMPLIANCE
NOTIFICATION-GROUP
OBJECT-GROUP

From SNMPv2-SMI

Integer32
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
latitudeComm	1.3.6.1.4.1.7185			The MIB module for the managment of Cisco Latitude MeetingPlace conferencing solution. MeetignPlace MIB traps are generated under the following conditions. - T1 status - Gateway System Integrity - Major hardware alarm - Minor hardware alarm - Major software alarm - Minor software alarm Each major and minor hardware and software notification includes an integer alarm code that indicates which software module and server reported the alarm. For hardware alarms, four additional codes identify the device type, the device address, slot number, and port number.
latitudeReg	1.3.6.1.4.1.7185.1
latitudeModules	1.3.6.1.4.1.7185.1.1
latitudeGeneric	1.3.6.1.4.1.7185.2
latitudeProducts	1.3.6.1.4.1.7185.3
meetingplace	1.3.6.1.4.1.7185.3.1
meetingplaceConfs	1.3.6.1.4.1.7185.3.1.1
ciscoLatitudeMIBCompliances	1.3.6.1.4.1.7185.3.1.1.1
ciscoLatitudeMIBComplianceRev1	1.3.6.1.4.1.7185.3.1.1.1.1			The compliance statement for entities which implement the MeetingPlace MIB.
ciscoLatitudeMIBGroups	1.3.6.1.4.1.7185.3.1.1.2
ciscoLatitudeAlarmGroupRev1	1.3.6.1.4.1.7185.3.1.1.2.1			Alarms objects within MeetingPlace.
ciscoLatitudeNotifsGroupRev1	1.3.6.1.4.1.7185.3.1.1.2.2			Notifications applicable to meetingplace.
meetingplaceObjs	1.3.6.1.4.1.7185.3.1.2
meetingplaceEvents	1.3.6.1.4.1.7185.3.1.3
meetingplaceEventsV2	1.3.6.1.4.1.7185.3.1.3.0
NTF mpT1Down	1.3.6.1.4.1.7185.3.1.3.0.1			MeetingPlace T1 Down Alarm. This indicates generically there is a problem with a telephony port. There are several possible alarm conditions that will generate this trap. This is from Release 4.3.
NTF mpGWSimAlarm	1.3.6.1.4.1.7185.3.1.3.0.2			MeetingPlace Gateway Alarm. This indicates an alarm generated by a MeetingPlace gateway. There are several alarms that will generate this trap. This is from Release 4.3
NTF mpMajHwAlarm	1.3.6.1.4.1.7185.3.1.3.0.3			MeetingPlace Major Hardware Alarm. This is generated any time MeetingPlace reports a major hardware alarm.
NTF mpMinHwAlarm	1.3.6.1.4.1.7185.3.1.3.0.4			MeetingPlace Minor Hardware Alarm. This is generated any time MeetingPlace reports a minor hardware alarm.
NTF mpMajSwAlarm	1.3.6.1.4.1.7185.3.1.3.0.5			MeetingPlace Major Software Alarm. This is generated any time MeetingPlace reports a major software alarm.
NTF mpMinSwAlarm	1.3.6.1.4.1.7185.3.1.3.0.6			MeetingPlace Minor Software Alarm. This is generated any time MeetingPlace reports a minor hardware alarm.
I32 mpExCode	1.3.6.1.4.1.7185.3.1.3.1	Integer32	read-only	MeetingPlace Exception Code. This is the primary code associated with each MeetingPlace exception condition. The mpAlarmDesc OID will provide a textual description of the exception code. Refer to the MeetingPlace System Managers Guide for more details.
I32 mpSysUnit	1.3.6.1.4.1.7185.3.1.3.2	Integer32	read-only	MeetingPlace Server Unit Number. This is the unit (server) number of the server that reported the exception.
INT mpHwDev	1.3.6.1.4.1.7185.3.1.3.3	INTEGER	read-only	MeetingPlace Hardware Device Code. This defines the class of device that generated a hardware fault. 'mpTemperature' - Temperature Sensor 'mpPowerSupply' - Power Supply 'mpSerialPort' - Serial Port 'mpTapeDrive' - Tape Drive 'mpHardDrive' - Hard Drive 'mpDisketteDrive' - Diskette Drive 'mpEthernet' - Ethernet Port 'mpModem' - Modem Port 'mpSystemMisc' - System Misc 'mpDSPMSC' - Master Switch Controller 'mpDSPPRC' - Port Resource Card 'mpT1Blade' - T1 Blade 'mpAnalogBlade' - Analog Blade 'mpT1Network' - T1 Network Interface 'mpSystemIntegrityCard' - System Integrity Card 'mpMainMemory' - Main Memory 'mpE1Blade' - E1 Blade 'mpE1Network' - E1 Network Interface 'mpVoIPBlade' - VoIP Blade
I32 mpHwUnit	1.3.6.1.4.1.7185.3.1.3.4	Integer32	read-only	MeetingPlace Hardware Device Unit Number. This is the unit number of the hardware device that generated a fault. For a disk this would be the SCSI ID. For a blade this would the the logical card number as defined in the system configuration.
I32 mpHwSlot	1.3.6.1.4.1.7185.3.1.3.5	Integer32	read-only	MeetingPlace Hardware Device Slot Number. This is the location of the hardware device that generated a fault. For a blade this would be the slot number.
I32 mpHwPort	1.3.6.1.4.1.7185.3.1.3.6	Integer32	read-only	MeetingPlace Hardware Device Port Number. This is the logical port number associated with a hardware fault. For a T1 alarm, this is the logical span number.
STR mpAlarmDesc	1.3.6.1.4.1.7185.3.1.3.7	DisplayString	read-only	MeetingPlace Alarm Description. This is a one-line text description of the exception condition. It comprises a string indexed by the exception code filled in with context-specific values.

RFC description

Cisco vendor-private MIB for Latitude security products; manages geolocation and access control features in Cisco security appliances.

Start monitoring Cisco Latitude MeetingPlace conferencing platforms (legacy) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-LATITUDE-MIB

What Is CISCO-LATITUDE-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description