| OID symbolic | OID numeric | Type | Access | Description |
|---|
| cApsExtMIB | 1.3.6.1.4.1.9.10.72 | | | The Cisco APS Extension MIB extends the Cisco APS MIB
in order to a) support path APS architectures and
b) support interfaces other than SONET (e.g. Cisco
CDL).
For configuration and monitoring of APS for CDL interfaces,
all objects and notifications in the Cisco APS MIB apply,
with the exception of the following:
- cApsStatusK1K2Rcv and cApsStatusK1K2Trans in
cApsStatusEntry,
- cApsConfigSdBerThreshold and cApsConfigSfBerThreshold
in cApsConfigEntry,
- cApsChanStatusSignalDegrades and
cApsChanStatusSignalFailures in cApsChanStatusEntry,
- cApsStatusFEPLFs in cApsStatusEntry,
- cApsEventFEPLF.
Whenever the description of an object in the Cisco APS MIB
refers to a SONET LTE interface, this applies to CDL
terminating interfaces as well. CDL interfaces have
ifType values other than 'sonet'.
For SONET path APS support, whenever the description of an
object in the Cisco APS MIB refers to a SONET LTE
interface, this applies to SONET PTE interfaces as well.
SONET PTE interfaces have ifType values 'sonetPath'. |
| cApsExtMIBObjects | 1.3.6.1.4.1.9.10.72.1 | | | |
| T/F cApsNotifiesEnable | 1.3.6.1.4.1.9.10.72.1.1 | TruthValue | read-write | When this object is set to 'true', it allows the generation of
the APS-related notifications defined in the CISCO-APS-MIB.
When this object is set to 'false', it prevents the generation
of the APS-related notifications defined in the CISCO-APS-MIB.
By default, this object is set to 'false'. |
| cApsConfigExtTable | 1.3.6.1.4.1.9.10.72.1.2 | | not-accessible | This table augments the cApsConfigTable. |
| cApsConfigExtEntry | 1.3.6.1.4.1.9.10.72.1.2.1 | | not-accessible | A conceptual row in the cApsConfigExtTable. |
| INT cApsConfigSpan | 1.3.6.1.4.1.9.10.72.1.2.1.1 | INTEGER | read-create | The span (hopByHop or endToEnd) for the APS group.
hopByHop
This refers to linear APS, e.g. linear SONET APS, or hopByHop
CDL APS. In a DWDM system, an APS channel may be associated
with either an individual wavelength or an optical fiber.
All APS channels within an APS group must be of the same type.
Systems that support linear APS on an individual wavelength
basis, must assign an ifIndex to each such wavelength.
endToEnd
This refers to path APS, e.g. endToEnd CDL APS. In this
configuration, each APS channel in the APS group is associated
with an endToEnd user path. This codepoint does not apply to
interfaces with an ifType value of 'sonet'.
This object may not be modified if the associated
cApsConfigRowStatus object is equal to 'active'. |
| INT cApsConfigYcable | 1.3.6.1.4.1.9.10.72.1.2.1.2 | INTEGER | read-create | The Y-cable configuration for the APS group associated with
user channels.
noYcable
The APS channels in the APS group are not connected to an
external Y-cable.
ycable
Two user-side interfaces (not necessarily SONET or CDL) are
connected to an external y-cable and are grouped into an APS
group for endToEnd APS. The received user signal is split
in the y-cable coupler and is received on both the interfaces.
However, only one interface must transmit toward the user at any
given time. With cApsConfigYcable set to 'ycable', the
cApsConfigSpan must be set to 'endToEnd'. There must be
only two APS channels in an APS group with cApsConfigYcable
set to 'ycable'.
ycableXconnectCommon
This refers to a configuration where two user-side interfaces
are connected to an external y-cable. The two signals received
on these interface are connected to the same cross connect in
the switch. The switch fabric selects one of the two received
signals, duplicates it, and forwards it to two network side
interfaces grouped for 1+1 linear APS. The received signal from
the network side is transmitted to only one user-side interface.
cApsConfigSpan is ignored if cApsConfigYcable is set to
'ycableXconnectCommon'. There must be only two APS channels in
an APS group with cApsConfigYcable set to
'ycableXconnectCommon'.
This object may not be modified if the associated
cApsConfigRowStatus object is equal to 'active'.
If this object is set to 'ycable' or 'ycableXconnectCommon',
the user must shut one of the two channels before setting
cApsConfigRowStatus to 'notInService'. |
| I32 cApsConfigMinSearchUpInterval | 1.3.6.1.4.1.9.10.72.1.2.1.3 | Integer32 | read-create | This object is instantiated only when the standby interface
is not monitored. If both interfaces go down and the standby
interface is not monitored, successive switchovers may be used
in order to search for an interface that is up.
This object specifies the minimum time interval between
switchovers when both interfaces go down. A backoff algorithm
should be used to increase the time interval between
successive switchovers. |
| I32 cApsConfigMaxSearchUpInterval | 1.3.6.1.4.1.9.10.72.1.2.1.4 | Integer32 | read-create | This object is instantiated only when the standby interface
is not monitored. If both interfaces go down and the standby
interface is not monitored, successive switchovers may be used
in order to search for an interface that is up.
This object specifies the maximum time interval between
switchovers when both interfaces go down. |
| I32 cApsConfigSwitchoverEnableInterval | 1.3.6.1.4.1.9.10.72.1.2.1.5 | Integer32 | read-create | This object specifies the value of the timer to control
the minimum interval between switchovers. After a switchover,
APS is re-enabled only after this amount of time has elapsed,
in order to prevent quick successive switchovers. |
| CAP cApsConfigMessageTransport | 1.3.6.1.4.1.9.10.72.1.2.1.6 | CApsMessageTransport | read-create | This object specifies the type of transport configured for
exchange of APS protocol messages. The type of transport
currently being used is indicated in the
cApsStatusMessageTransport object.
When this object is set to 'ip', values must be specified
for the cApsConfigFarEndIpAddressType, cApsConfigFarEndIpAddress
and cApsConfigFarEndGroupName objects. |
| I32 cApsConfigMessageHolddown | 1.3.6.1.4.1.9.10.72.1.2.1.7 | Integer32 | read-create | The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'.
APS messages are exchanged between systems to support
bidirectional or linear operation. To avoid potential
system misbehavior in which APS messages would be
triggered in an uncontrolled fashion, a hold down timer
is introduced that prevents successive event-triggered
APS messages from being sent in too short a time
interval.
This object specifies the minimum time between
event driven requests. |
| I32 cApsConfigMessageHolddownCount | 1.3.6.1.4.1.9.10.72.1.2.1.8 | Integer32 | read-create | The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'.
The maximum number of APS messages that can be sent within
one cApsConfigMessageHolddown interval. |
| I32 cApsConfigMessageMaxInterval | 1.3.6.1.4.1.9.10.72.1.2.1.9 | Integer32 | read-create | The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'.
An APS message is sent unconditionally, whenever the amount
of time specified by this object has elapsed since the last
transmission of an APS message. |
| STR cApsConfigFarEndGroupName | 1.3.6.1.4.1.9.10.72.1.2.1.10 | SnmpAdminString | read-create | The value specified in this object applies when the value of
cApsStatusMessageTransport is 'dcc', 'ip', or 'osc'.
APS messages, used to support bidirectional or linear
operation, can be sent out-of-band over an IP network.
In this case, this object is used to specify the a textual
name for the APS group at the far-end to which the message
is being sent. |
| IPt cApsConfigFarEndIpAddressType | 1.3.6.1.4.1.9.10.72.1.2.1.11 | InetAddressType | read-create | This object can be set only when the value of
cApsConfigMessageTransport is 'ip'.
This object specifies the type of IP address defined
in cApsConfigFarEndIpAddress. |
| IP cApsConfigFarEndIpAddress | 1.3.6.1.4.1.9.10.72.1.2.1.12 | InetAddress | read-create | This object can be set only when the value of
cApsConfigMessageTransport is 'ip'.
This object specifies the IP address of the far end, which is
used as the destination address in APS messages transmitted by
this network element. |
| cApsStatusExtTable | 1.3.6.1.4.1.9.10.72.1.3 | | not-accessible | This table augments the cApsStatusTable. |
| cApsStatusExtEntry | 1.3.6.1.4.1.9.10.72.1.3.1 | | not-accessible | A conceptual row in the cApsStatusExtTable. |
| CDL cApsStatusCdlApsBytesRcv | 1.3.6.1.4.1.9.10.72.1.3.1.1 | CdlApsBytes | read-only | The current value of the APS bytes received on the
protection channel. This object applies only to CDL
interfaces. This is equivalent to cApsStatusK1K2Rcv
for SONET. |
| CDL cApsStatusCdlApsBytesTrans | 1.3.6.1.4.1.9.10.72.1.3.1.2 | CdlApsBytes | read-only | The current value of the APS bytes transmitted on the
protection channel. This object applies only to CDL
interfaces. This is equivalent to cApsStatusK1K2Trans
for SONET. |
| CAP cApsStatusMessageTransport | 1.3.6.1.4.1.9.10.72.1.3.1.3 | CApsMessageTransport | read-only | This object specifies the type of transport currently being used
for exchange of APS protocol messages.
The value of this object is the same as the value specified in
the cApsConfigMessageTransport object, except when the value of
that object is 'autoSelect'. In that case, the type of
transport that has been automatically selected is indicated
by this object. |
| cApsChanStatusExtTable | 1.3.6.1.4.1.9.10.72.1.4 | | not-accessible | This table augments the cApsChanStatusTable. |
| cApsChanStatusExtEntry | 1.3.6.1.4.1.9.10.72.1.4.1 | | not-accessible | A conceptual row in the cApsChanStatusExtTable. |
| CAP cApsChanStatusExtRequest | 1.3.6.1.4.1.9.10.72.1.4.1.1 | CApsK1K2 | read-only | The highest priority local request for a channel in an APS
group.
This object uses only the 'Type of Request' part (bits 1-4)
of the K1 byte. |
| cApsChanConfigExtTable | 1.3.6.1.4.1.9.10.72.1.5 | | not-accessible | This table augments the cApsChanConfigTable. |
| cApsChanConfigExtEntry | 1.3.6.1.4.1.9.10.72.1.5.1 | | not-accessible | A conceptual row in the cApsChanConfigExtTable. |
| T/F cApsChanConfigReflectorMode | 1.3.6.1.4.1.9.10.72.1.5.1.1 | TruthValue | read-only | Indicates whether the channel is in reflector mode or not.
Reflector mode establishes a communication channel
between the local PTE and the remote PTE at the other
end of the SONET path.
This object has a value of true(1), if reflector mode is
configured and a value of false(2), if the reflector mode
is not configured on the channel. |
| cApsChanAssociationTable | 1.3.6.1.4.1.9.10.72.1.6 | | not-accessible | This table lists the configured IP address of the
protect/working interfaces. |
| cApsChanAssociationEntry | 1.3.6.1.4.1.9.10.72.1.6.1 | | not-accessible | A conceptual row in cApsChanAssociationTable. |
| STR cApsChanAssociationGroupName | 1.3.6.1.4.1.9.10.72.1.6.1.1 | SnmpAdminString | not-accessible | A textual name for the APS group which this channel is
included in. |
| CAP cApsChanAssociationNumber | 1.3.6.1.4.1.9.10.72.1.6.1.2 | CApsChannelConfigNumber | not-accessible | This field is set to a unique working/protection channel
number within an APS group. The value 0 indicates the
null channel. The values 1-14 define a working channel. |
| CAP cApsChanAssociationMapNumber | 1.3.6.1.4.1.9.10.72.1.6.1.3 | CApsChannelConfigNumber | not-accessible | This field is set to the associated working/protection
channel number corresponding to the field
cApsChanAssociationNumber within an APS group.
The value 0 indicates the null channel. The values 1-14
define a working channel. |
| IPt cApsChanAssociationIpAddressType | 1.3.6.1.4.1.9.10.72.1.6.1.4 | InetAddressType | read-only | This object specifies the type of IP address defined
in cApsChanAssociationIpAddress. |
| IP cApsChanAssociationIpAddress | 1.3.6.1.4.1.9.10.72.1.6.1.5 | InetAddress | read-only | IP Address of the working/protection channel.
If cApsChanAssociationNumber represents a working channel
number, this object indicates the IP Address of the associated
protection channel.
If cApsChanAssociationNumber represents a protection channel
number, this object indicates the IP Address of the associated
working channel. |
| cApsExtMIBConformance | 1.3.6.1.4.1.9.10.72.2 | | | |
| cApsExtGroups | 1.3.6.1.4.1.9.10.72.2.1 | | | |
| cApsNotifiesEnableGroup | 1.3.6.1.4.1.9.10.72.2.1.1 | | | A managed object that controls the generation of APS-related
notifications defined in the CISCO-APS-MIB. |
| cApsConfigPathExt | 1.3.6.1.4.1.9.10.72.2.1.2 | | | An augmentation to cApsConfigTable objects providing
configuration information applicable to path APS architectures. |
| cApsConfigYcableExt | 1.3.6.1.4.1.9.10.72.2.1.3 | | | An augmentation to cApsConfigTable objects providing
configuration information applicable to APS groups when Y cable
protection is supported. |
| cApsConfigSearchExt | 1.3.6.1.4.1.9.10.72.2.1.4 | | | An augmentation to cApsConfigTable objects providing
configuration information applicable to APS groups in which the
standby interface is not monitored. |
| cApsStatusCdlExt | 1.3.6.1.4.1.9.10.72.2.1.5 | | | An augmentation to cApsStatusTable objects providing status
information applicable to APS groups for CDL. |
| cApsConfigSwitchoverTimerExt | 1.3.6.1.4.1.9.10.72.2.1.6 | | | An augmentation to cApsConfigTable objects providing
configuration information to prevent quick successive
switchovers. |
| cApsConfigMessageExt | 1.3.6.1.4.1.9.10.72.2.1.7 | | | An augmentation to cApsConfigTable objects providing
configuration information applicable to message
transport used to exchange APS protocol messages. |
| cApsConfigIPExt | 1.3.6.1.4.1.9.10.72.2.1.8 | | | An augmentation to cApsConfigTable objects providing
configuration information applicable to APS groups
communicating over IP. |
| cApsStatusMessageExt | 1.3.6.1.4.1.9.10.72.2.1.9 | | | An augmentation to cApsStatusTable objects providing
status information applicable to message transport
used to exchange APS protocol messages. |
| cApsChanStatusRequestExt | 1.3.6.1.4.1.9.10.72.2.1.10 | | | An augmentation to cApsChanStatusTable objects providing
additional status information for channels in APS groups. |
| cApsChanConfigExt | 1.3.6.1.4.1.9.10.72.2.1.11 | | | An augmentation to cApsChanConfigTable objects providing
configuration information of channels in APS groups. |
| cApsChanAssociationGroup | 1.3.6.1.4.1.9.10.72.2.1.12 | | | cApsChanAssociationTable object provides for all
protection/working channels, the associated working/protection
channel IP address. |
| cApsExtCompliances | 1.3.6.1.4.1.9.10.72.2.2 | | | |
| cApsExtCompliance | 1.3.6.1.4.1.9.10.72.2.2.1 | | | The compliance statement for augmented APS groups. |
| cApsExtCompliance2 | 1.3.6.1.4.1.9.10.72.2.2.2 | | | The compliance statement for augmented APS groups. |
| cApsExtComplianceRev1 | 1.3.6.1.4.1.9.10.72.2.2.3 | | | The compliance statement for augmented APS groups. |
