CISCO-DMN-DSG-BKPRST-MIB

All MIBs › CISCO-DMN-DSG-BKPRST-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2012-03-12

Category: Cisco Devices, Satellite

Description: Manages backup and restore operations for configuration data on the Cisco DMN D9800 digital satellite gateway.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-DMN-DSG-BKPRST-MIB?

CISCO-DMN-DSG-BKPRST-MIB is a Cisco proprietary MIB for the configuration backup and restore feature on the D9800 satellite gateway, part of the DMN DSG MIB family. It exposes operational and configuration data: the backup/restore operation to trigger and its type, the FTP server destination and credentials, the last backup and restore filenames and timestamps, and the current operation status. It is a software/configuration-state monitoring MIB, directly relevant to disaster-recovery readiness by revealing whether a scheduled or manual backup completed successfully and when it last ran. It relies on FTP as its file-transfer mechanism, with no other notable MIB dependency evident. It is deployed on Cisco D9800 satellite gateways in broadcast headends for scheduled or manual configuration backups. Engineers can download the CISCO-DMN-DSG-BKPRST-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-DMN-DSG-BKPRST-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco DMN D9800 digital satellite gateway

Monitoring Examples

Polling backupRestoreOperationStatus after triggering backupRestoreOperation lets an admin confirm a backup completed rather than failing mid-transfer. backupRestoreLastBackupTime and backupRestoreLastBackupFile let an admin verify backups are running on schedule, and a stale backupRestoreLastRestoreTime combined with an error status would flag a failed restore attempt needing investigation.

What Can Be Monitored

last backup file/time
last restore file/time
current backup/restore operation status
FTP server destination for backups

Imported Objects

From CISCO-DMN-DSG-ROOT-MIB

ciscoDSGUtilities

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Integer32
IpAddress
MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoDSGBKPRST	1.3.6.1.4.1.1429.2.2.5.3			Cisco DSG Backup Restore MIB.
backupRestoreInfo	1.3.6.1.4.1.1429.2.2.5.3.1
INT backupRestoreOperation	1.3.6.1.4.1.1429.2.2.5.3.1.1	INTEGER	read-write	Type of operation ( backup or restore ). Setting backup( 1 ) backs up the specified file to the FTP server. Setting restore( 2 ) restores the specified file from the FTP server.
INT backupRestoreType	1.3.6.1.4.1.1429.2.2.5.3.1.2	INTEGER	read-write	Backup data sets to be included in the backup/restore file. Following backup options are available. Standard:To save the user settings to the backup file. Extended:To save user settings and tuning information to the backup file. Full:To save user settings,tuning information and factory defaults to the backup file.
STR backupRestoreFileName	1.3.6.1.4.1.1429.2.2.5.3.1.3	DisplayString	read-write	Name of file to backup or restore.
IP backupRestoreFtpServerIp	1.3.6.1.4.1.1429.2.2.5.3.1.4	IpAddress	read-write	FTP Server IP Address of the FTP server used to store the backup/restore file. Format: ###.###.###.###, Range of ### is 0 to 255.
STR backupRestoreFtpUsername	1.3.6.1.4.1.1429.2.2.5.3.1.5	DisplayString	read-write	FTP username to access the FTP Server.
STR backupRestoreFtpPassword	1.3.6.1.4.1.1429.2.2.5.3.1.6	DisplayString	read-write	FTP password to access the FTP Server.
I32 backupRestoreFtpPortno	1.3.6.1.4.1.1429.2.2.5.3.1.7	Integer32	read-write	FTP port number of the FTP Server used to store the backup\restore file.
STR backupRestoreLastBackupFile	1.3.6.1.4.1.1429.2.2.5.3.1.8	DisplayString	read-only	Name of last backedup file.
STR backupRestoreLastBackupTime	1.3.6.1.4.1.1429.2.2.5.3.1.9	DisplayString	read-only	Time of last backup.
STR backupRestoreLastRestoreFile	1.3.6.1.4.1.1429.2.2.5.3.1.10	DisplayString	read-only	Name of last restored file.
STR backupRestoreLastRestoreTime	1.3.6.1.4.1.1429.2.2.5.3.1.11	DisplayString	read-only	Time of last restore operation.
INT backupRestoreOperationStatus	1.3.6.1.4.1.1429.2.2.5.3.1.12	INTEGER	read-only	Backup/Restore Operation status ( inprogress,pass or failed ).
INT backupRestoreDetailedStatus	1.3.6.1.4.1.1429.2.2.5.3.1.13	INTEGER	read-only	Detailed status of Backup/Restore operation.
STR backupRestorePercentageComp	1.3.6.1.4.1.1429.2.2.5.3.1.14	DisplayString	read-only	Percentage of Backup/Restore operation Completed. The range is from 0 to 100 in steps of 1 percentage.

RFC description

Cisco DSG Backup Restore MIB for managing backup and restore operations.

Start monitoring Cisco DMN D9800 digital satellite gateway with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-DMN-DSG-BKPRST-MIB

What Is CISCO-DMN-DSG-BKPRST-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description